Intrasonic Technology BTRECEIVER Bluetooth Add-on User Manual Bluetooth add on
Intrasonic Technology, Inc. Bluetooth Add-on Bluetooth add on
User manual
Thank you for purchasing the Intrasonic® Technology
Bluetooth®BT-RecieverAdd-on Device.Now you can enjoy
Bluetooth® audio streaming technology for playing music
from your phone, tablet or laptop.The power is supplied
using a combination cable (2) with Mini USB plug on one
end and Standard USB plug on the other. The mini USB
end plugs into the device and the standard USB end plugs
into any (a) USB port or (b) 110V switching power supply (included) or USB Car
Charger (not included). Also provided is a 3.5mm stereo audio cable (3) which you will
plug into the auxiliary input of your stereo. To find the Bluetooth®device,search for
the device name “IST” and pair it up to enjoystreaming music.
2013
Intrasonic
Technology
Limited
[BLUETOOTH ADD-ON]
Instruction Manual
IntraSonic Technology, Inc. | 9525 Forest View Street | Dallas, Texas 75243 |
972.235.0670
www.intrasonictechnology.com
IntraSonic Technology, Inc. | 9525 Forest View Street | Dallas, Texas 75243 |
972.235.0670
www.intrasonictechnology.com
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body