Ion Technology 917615001 Bluetooth Speaker User Manual

i-ON Technology Inc. Bluetooth Speaker

User Manual

1
Model: iSB-5001
Instruction manual
We take this opportunity to thank you for purchasing the i-ON iSB-5001 Bluetooth Speaker. We
strongly suggest that you study these operating instructions carefully. Before attempting to operate
the unit, and that you note all the listed precautions.
CONTENTS
SAFETY INSTRUCTIONS
PAGE 2
INTRODUCTION
PAGE 3
CONTENTS
PAGE 3
SPECIFICATIONS
PAGE 3
USING iSB-5001
PAGE 4
TROUBLESHOOTING GUIDE
PAGE 5
CARE & MAINTENANCE
PAGE 6
2 / 6
SAFETY INSTRUCTIONS
FOR HOUSEHOLD AND INDOOR USE ONLY
PLACE THE APPLIANCE ON A FLAT, STABLE SURFACE WITH ADEQUATE VENTILATION AND AWAY FROM
OTHER SOURCES OF HEAT. MINIMUM DISTANCES AROUND THE APPLIANCE FOR ADEQUATE
VENTILATION IS 10CM. DO NOT COVER OR RESTRICT VENTILATION OPENINGS.
CHILDREN SHOULD BE SUPERVISED TO ENSURE THEY DO NOT PLAY WITH THE APPLIANCE, AND THE
APPLIANCE AND CABLE SHOULD BE KEPT COMPLETELY OUT OF REACH OF YOUNG CHILDREN.
THIS APPLIANCE IS NOT DESIGNED FOR USE BY CHILDREN, OR PERSONS WITH REDUCED PHYSICAL,
SENSORY OR MENTAL CAPABILITIES, AND SHOULD NOT BE USED BY SUCH PERSONS UNLESS THEY
CAN DO SO SAFELY. WHERE NECESSARY, SUCH PERSONS (OR ANYONE WITH LACK OF EXPERIENCE
OR KNOWLEDGE) SHOULD FIRST BE GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF
THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
FULLY UNWIND THE CABLE BEFORE PLUGGING IN AND ENSURE THE CABLE IS POSITIONED AWAY
FROM AREAS WHERE IT IS LIKELY TO GET DAMAGED OR CAUSE A TRIP HAZARD.
THE OUTPUT CORD OF THIS MAINS ADAPTOR CANNOT BE REPLACED. IN THE EVENT OF DAMAGE TO
THE CABLE, JACK PLUG OR ADAPTOR, THE ENTIRE ADAPTOR UNIT SHOULD BE REPLACED.
CONNECTIONS MUST ONLY BE MADE VIA THE MAINS ADAPTOR SUPPLIED, NEVER CONNECT THE
APPLIANCE DIRECTLY TO THE 240V MAINS SUPPLY.
NEVER USE THE ADAPTER SUPPLIED WITH ANY OTHER APPLIANCE.
THE MAINS ADAPTOR WILL BECOME WARM IN USE; DO NOT COVER OR PLACE ON OR NEAR
SURFACES THAT COULD BE AFFECTED BY HEAT SUCH AS TABLE TOPS AND CARPETS.
DO NOT PULL ON CABLE TO DISCONNECT FROM MAINS SUPPLY.
KEEP APPLIANCE, CABLE, MAINS ADAPTOR PLUG DRY AND AWAY FROM AREAS WHERE IT IS LIKELY
TO GET SPLASHED. AVOID USING IN HOT, HUMID ENVIRONMENTS.
DO NOT PLACE ITEMS WITH NAKED FLAMES OR CONTAINERS WITH LIQUIDS ON THIS APPLIANCE.
SWITCH OFF AND UNPLUG WHEN NOT IN USE AND BEFORE CLEANING OR SERVICING THE
APPLIANCE.
SERVICING OF THIS APPLIANCE MUST ONLY BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.
SERVICING IS REQUIRED WHEN THE APPARATUS HAS BEEN DAMAGED IN ANY WAY: SUCH AS LIQUID
HAS BEEN SPILLED OR OBJECTS HAVE FALLEN INTO THE APPARATUS; THE APPARATUS HAS BEEN
EXPOSED TO RAIN OR MOISTURE, DOES NOT OPERATE NORMALLY, OR HAS BEEN DROPPED- DO NOT
ATTEMPT TO SERVICE THIS PRODUCT YOURSELF.
OPENING OR REMOVING COVERS MAY EXPOSE YOU TO DANGEROUS VOLTAGES OR OTHER
HAZARDS.
TO PREVENT RISK OF FIRE OR ELECTRIC SHOCK, AVOID OVERLOADING WALL OUTLETS, EXTENSION
CORDS, OR INTEGRAL CONVENIENCE RECEPTACLES
ALWAYS ENSURE THE MAINS ADAPTOR PLUG IS READILY UNPLUGGABLE – DO NOT USE WITH
‘LOCKABLE’ SOCKETS OR PERMANENTLY WIRE TO MAINS.
The exclamation point within an
equilateral triangle is intended to
alert the user to presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of un-
insulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock.
3 / 6
INTRODUCTOIN
The i-ON iSB-5001 is a universal wireless portable speaker that works with your iPod, iPhone & iPad or any
Bluetooth devices. It is a compact and powerful speaker lets you enjoy your music anytime and anywhere.
CONTENTS:
1 x iSB-5001,
1 x User manual,
1 x Micro USB Power Cable,
1 x Audio cable
SPECIFICATIONS
Compatible with all wireless Bluetooth devices
On-to-go design is perfect for travel
Bluetooth Range Up to 33' (10 m)
Speaker Output: 4W
Battery Capacity: 1000mAh
Playback Time Up to 5 Hours
Battery Charge Time: 2 Hours
Line-in port with included audio cable
Bluetooth Support: A2DP (Wireless Stereo Bluetooth)
Dimension: 5.2 x 1.8 x 1.8 in (131.5 x 46.5 x46.5 mm)
Operating Temperature: 14 to 131 °F (-10 to 55 °C)
USING iSB-5001
Charging the Unit
Connect the micro USB plug to the micro USB charging port on the back of the unit.
Connect the standard USB plug end of the cable to a power USB port on a computer or other
USB charging device. For first time use, charge unit for about 3 hours.
A red light glows steadily while the unit is charging and turns OFF once the unit is fully charged.
If unit is not powered on when micro USB plug is connected, the red light glows steadily to
indicate unit is charging.
For best sound performance, only operate the unit when fully charged.
Using Bluetooth: Pairing Your Device
For First Time use (auto pairing):
Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the
device’s user manual.
4 / 6
Move the Power ON/OFF Switch on the unit to the ON position (right). The first time the unit is
turned on it will enter auto pairing mode, indicated by a rapidly flashing blue light. “isb-5001”
should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message
appears, tap on “iSB-5001“ to complete pairing.
Once paired with a device, the blue light will glow steadily. There should be an indication on your
device that pairing is complete (”Connected” or similar). On some devices, you must then select
“Use as Audio Device” or similar on the device’s Bluetooth menu. Once paired, your device
should auto-link to the iSB-5001 whenever within range (about 30 feet). If auto pairing did not
work, press and hold the Bluetooth Pairing Button located on the back of the unit for 2 seconds
to retry pairing.
Once the Unit Has Paired with A Device (auto linking):
When the unit has been paired with a device, the next time it is powered on, the unit will turn on
in auto link mode and attempt to auto link to a previously paired device, indicated by a slowly
flashing blue light. If a linked device is found, the indicator will glow solid blue.
If no linked device is found, the blue light will continue to flash slowly. Press and hold the
Bluetooth Pairing Button located on the back of the unit for 2 seconds. The unit will enter pairing
mode, 2 short beeps will sound and the light will flash blue rapidly while the unit attempts to
pair.
Playing Audio Via Bluetooth
Move the Power ON/OFF Switch to the ON position (right) to listen to audio streamed wirelessly
from your paired iPad, iPhone, iPod or other Bluetooth device. The blue light will flash as the unit
searches for a previously paired device, and then turn solid blue once a previously paired device
is detected.
Use the controls on your device to play or pause audio, navigate tracks and control volume from
your Bluetooth device.
When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit
off.
NOTE: Aux-in audio is disabled when Bluetooth audio is playing from a different device.
Playing Audio via Aux In
Connect the included 3.5 mm audio plug to the headphone or line-out jack on your audio device
and the other end into the Aux-in Jack on the back of the unit.
Move the Power ON/OFF Switch to the ON position (right) to listen to audio via aux in. The
indicator light will flash blue.
Power on the audio device and use the controls on the device to play or pause audio, navigate
tracks and control volume. If your audio device is already paired with the unit, the light will glow
steadily blue as in Bluetooth mode, but you will hear your audio via aux-in.
When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit
off. Remember to turn off your audio device, too.
Playing Audio via Aux Out
You can connect the unit to an external speaker via the Aux-out jack located on the back of the
unit to expand the audio playing in Bluetooth or Aux-In modes.
Connect a 3.5 mm audio cable plug to the Aux- out jack on back of the unit and connect the
other end to the line-in jack on your external speaker.
Move the Power ON/OFF Switch to the ON position (right).
Power on a Bluetooth or aux-in audio device and use the controls on the device to play or pause
audio, navigate tracks and control volume.
5 / 6
When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit
off. Remember to turn off your audio device, too.
TROUBLESHOOTING GUIDE
Unit doesn’t respond (no power)
Make sure unit is completely charged.
Check that all connections are correct and properly plugged in.
Make sure your device is properly paired with the iSB-5001.
Make sure the Power ON/OFF Switch switch is not in the OFF (left) position.
Resetting the Unit
If the unit is “frozen” or locks up, you may wish to reset it. To do so, turn the unit ON and press
the end of paperclip or similar into the reset port on the back of the unit for less than 2 seconds
to reset it without clearing Bluetooth settings. The unit will reset and power back on. (If pressed
for longer than 2 seconds, the unit will reset but will not power back on.)
To reset Bluetooth settings, turn unit ON then press and hold the Bluetooth Pairing Button on
the back of the unit for 8 seconds. The light will flash red rapidly and a tone will sound. You will
then need to re-pair any previously linked devices.
Trouble pairing device/computer with iSB-5001
Bluetooth implementation varies depending on your device’s hardware and operating system.
Please see our website for updates on pairing.
Make sure you have the latest firmware for your device.
Make sure your device is working properly. Check your device’s manual for details on Bluetooth
pairing and linking.
CARE AND MAINTENANCE
.
Ensure the unit is switched off and unplugged form any electrical outlet
Wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray an aerosol at or near the radio.
Do not allow liquids to spill or objects to drop into any openings.
Always use original packaging if it is necessary to transport the unit at any time.
If this unit is used in a dusty environment, it may be necessary to have the unit serviced at your
local dealer periodically.it is not advisable to allow large deposits of dust to accumulate within the
unit as it may prevent adequate cooling. Similarly dust deposits which become damp can sometime
lead to electrical problems which may cause severe damage to the delicate electronics within this
unit.
6
WEEE marking
“Information for the Consumers”
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can
be recycled and reused. When this crossed out wheeled bin symbol is attached to a product it
means the product is covered by the European directive 2002/96/EC.
Please make yourself aware of the local collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old product with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences for the environment and human health.
This product complies with European low voltage （2006/95/EC）
And electromagnetic compatibility（2004/108/EC）directives.

Navigation menu