Iton Technology BW2570PCIE BW2570-PCIE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3198239
Application ID	G+8Vd3My7o/9AAv8wuaNJw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.08kB (488559 bits)
Date Submitted	2016-11-17 00:00:00
Date Available	2016-11-17 00:00:00
Creation Date	2016-10-15 18:19:23
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2016-11-14 10:53:07
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	anbotek

Iton Technology Corp.
Wi‐Fi MODULE SPECIFICATION
Part Number:
BW2570‐PCIE
Version: V 1.0
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
Disclaimer and Copyright Notice
Information in this document, including URL references, is subject to change without notice.
THIS DOCUMENT IS PROVIDED "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY
OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY
OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.
All liability, including liability for infringement of any proprietary rights, relating to use of information in this
document is disclaimed. No licenses express or implied, by estoppel or otherwise, to any intellectual
property rights are granted herein.
The Wi‐Fi Alliance Member Logo is a trademark of the Wi‐Fi Alliance.
All trade names, trademarks and registered trademarks mentioned in this document are property of their
respective owners, and are hereby acknowledged.
Copyright ⓒ 2014 ITON Technology Corp. All rights reserved.
1. Overview
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
GENERAL DESCRIPTION
The Broadcom BCM43570 single‐chip device provides the highest level of integration for a mobile or
handheld wireless system, with integrated IEEE 802.11 a/b/g/n/ac MAC/baseband/radio and Bluetooth 4.1
+ EDR. It provides a small form‐factor solution with minimal external components to drive down cost for
mass volumes and allows for handheld device flexibility in size, form, and function. Comprehensive power
management circuitry and software ensure the system can meet the needs of highly mobile devices that
require minimal power consumption and reliable operation.
2. Block Diagram
3. Application Diagram
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
4. Feature
Wi-Fi Key Feature
• IEEE 802.11ac Draft compliant
• Dual-stream spatial multiplexing from 1 Mbps up to 866.7 Mbps data rates
• Supports 20, 40, and 80 MHz channels with optional Short GI(SGI) (256QAM modulation)
• Full IEEE 802.11a/b/g/n legacy compatibility with enhanced performance
• Supports IEEE 802.11ac/n beam forming
• On-chip power amplifiers and low-noise amplifiers for both bands
• Supports various RF front-end architectures including:
- Three antennas design: two separate antennas (Core0 and Core1 to WLAN) and a separate
antenna to Bluetooth
• Supports PCIe Gen2 interfaces
Bluetooth Key Features
• Complies with Bluetooth Core Specification Version 4.1 + EDR with provisions for supporting future
specifications
• Bluetooth Class 1 or Class 2 transmitter operation
• Adaptive frequency hopping(AFH) for reducing radio frequency interference
• USB 2.0 full-speed (12Mbps) supported for Bluetooth
• Supports Serial Flash interface
• Incorporates GFSK for 1Mbps, Pi/4-DQPSK for 2Mbps and 8-DPSK for 3Mbps to support EDR
5. WLAN Product Specification
Dimension
29.8*26.8*0.3mm
Chip‐set
BCM43570
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
Standard
IEEE802.11ac;IEEE802.11n;IEEE802.11g;IEEE802.11b;
IEEE802.11a; Integrated Bluetooth 4.1
Modulation Type
OFDM(CCK/16‐QAM/64‐QAM/ 256 QAM)
Frequency Band
40MHz
Interface
WLAN PCIe, Bluetooth USB 2.0
Spread Spectrum
DSSS
Transmission Distance
Indoor up to 100m, outdoor up to 300m(limited in an environment)
Data Security
64/128 bit WEP, WPA/WPA2,WPA‐PSK/WPA2‐PSK(TKIP/AES)
Transmit Power
2.4G[11g: 15±2dBm, 11b:17±2dBm, 11n HT20 :
14±2dBm,11n HT40 :14±2dBm]
5G[11n HT20:11±2dBm, 11n HT40:11±2dBm HT80 10±2dBm
11a:12±2dBm ]
Rx Sensitivity
867Mbps:‐61dBm@10% PER
300Mbps:‐61dBm@10% PER
Data Rate
Support 802.11ac 80MHz Max.
866.7Mbps/780Mbps(400GI/800GI)
Operating Temperature
0℃ ~ 50℃
Storage Temperature
‐10℃ ~ 70℃
Relative humidity
10%~95%
Antenna
external PF
Operation System
windows XP32/64,Vista 32/64, Win7 32/64, Linux, Mac
Operation Voltage
DC 3.3V
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
6. BT Product Specification
Parameter
Conditions
Frequency range
RX sensitivity
Maximum
Unit
2480
MHz
1 Mbps
‐82
dBm
2 Mbps
‐82
dBm
3 Mbps
‐82
dBm
‐24
Class 1/GFSK
Class 2/GFSK
Iton Technology Corp
Typical
2402
Initial carrier frequency offset
Output power
Minimum
24
‐6
KHz
dBm
dBm
www.sziton.com
Iton Technology Corp.
7. Size Of Module Graph
7.1 Physical Map
7.2 Machine Size Map And Pin Definition
Pin
Name
Description
PCIE_WAKE_N
PCI Power management event output
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
VDD3_3
Module +3.3V power supply
NC
NC
Ground
Ground
NC
NC
NC
NC
PCIE_CLKREQ_N
PCIE clock request signal
NC
NC
Ground
Ground
10
NC
NC
11
PCIE_REFCLK_N
12
NC
100 OHM differential pair clock signal
Negative
NC
13
PCIE_REFCLK_P
14
NC
100 OHM differential pair clock signal
positive
NC
15
Ground
Ground
16
NC
NC
17
NC
NC
18
Ground
Ground
19
NC
NC
20
W_DISABLE_N
WLAN & Bluetooth regulator power up
21
Ground
Ground
22
PCIE_PRST_N
PCIE preset signal
100 OHM differential pair TX data signal
24
VDD3_3
Module +3.3V power supply
100 OHM differential pair TX data signal
26
Ground
Ground
27
Ground
Ground
28
NC
NC
29
Ground
Ground
30
NC
NC
100 OHM differential pair RX data signal
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
32
NC
NC
100 OHM differential pair RX data signal
34
Ground
Ground
35
Ground
Ground
36
BT_USB_DN
Bluetooth USB 2.0
37
Ground
Ground
38
BT_USB_DP
Bluetooth USB 2.0
39
VDD3_3
Module +3.3V power supply
40
Ground
Ground
41
VDD3_3
Module +3.3V power supply
42
NC
NC
43
Ground
Ground
44
WLAN_LED_N_GPIO_13
45
WLAN_HOST_WAKE
WLAN wake up Host
46
NC
NC
47
BT_HOST_WAKE
Bluetooth wake up Host
48
NC
NC
49
BT_DEV_WAKE
Host wake up Bluetooth device
50
Ground
Ground
51
NC
NC
52
VDD3_3
Module +3.3V power supply
FCC STATEMENT:
Iton Technology Corp
www.sziton.com
Iton Technology Corp.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC INFORMATION (additional)
OEM INTEGRATION INSTRUCTIONS:
Iton Technology Corp
www.sziton.com
10
Iton Technology Corp.
This device is intended only for OEM integrators under the following conditions: The module must be installed in
the host equipment such that 20 cm is maintained between the antenna and users, and the transmitter module
may not be co-located with any other transmitter or antenna. The module shall be only used with the internal
antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met,
further transmitter test will not be required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this module installed (for example, digital
device emissions, PC peripheral requirements, etc.).
Validity of using the module certification:
In the event that these conditions cannot be met (for example certain laptop configurations or co-location with
another transmitter), then the FCC authorization for this module in combination with the host equipment is no
longer considered valid and the FCC ID of the module cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
End product labeling:
This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible area
with the following: “Contains FCC ID: 2AJ22-BW2570PCIE”.
Information that must be placed in the end user manual:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove
this RF module in the user's manual of the end product which integrates this module. The end user manual shall
include all required regulatory information/warning as show in this manual.
This device must be kept away from all persons by 20cm or more and installations using less distance, or installations
using antennas with gain greater than that with which this was Certified will require additional approvals.
Iton Technology Corp
www.sziton.com
11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : anbotek
Create Date                     : 2016:10:15 18:19:23+08:00
Modify Date                     : 2016:11:14 10:53:07+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : anbotek
Title                           : <5C5C3139322E3136382E322E3137365CB0B8BCFEBDF8D0D0D6D05C3031313630393734354920D6D0D2D7CCDAB4EF20CEDECFDFC4A3BFE93F4257323537302D5043494520CFEEC7ED2D616D792D4E422D525454455CD7CAC1CFD5FBC0ED5C55736572206D616E75616C2E646F6378>
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:11:14 10:53:07+08:00
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:84b7918f-8bad-42fe-83e8-fc497a8832c3
Instance ID                     : uuid:7962906f-1fb4-434d-a3b6-e1b317ed91c9
Page Count                      : 11

EXIF Metadata provided by EXIF.tools