Iton Technology STB1132 Bluetooth 4.1 data module User Manual

iTon Technology Corp. Bluetooth 4.1 data module Users Manual

Users Manual

©2016-2017 ITON Technology Corp.本檔案是商業機密，未經事先同意，不得向第三方廠商透露。此處提供的資訊被認為是可靠的，但生產測試可能不包括所有參數的測試。中易騰達科技股份有限公司保留在沒有通知的情況下隨時更改資訊的權利。This document contains information that is proprietary to ITON Technology Corp. This document is commercially confidential andmust NOT be disclosed to third parties without prior consent. The information provided herein is believed to be reliable. Butproduction testing may not include testing of all parameters. ITON Technology Corp. reserves the right to change information at anytime without notification.STB1132-25Module SpecificationVer1.0.0
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/2/16ContentsVersion:.................................................................................................................................................31. Overview..........................................................................................................................................41.1 Brief........................................................................................................................................ 41.2 Features.................................................................................................................................41.3 Application........................................................................................................................... 42. Hardware System.......................................................................................................................... 52.1 Function block..................................................................................................................... 52.2 PIN assignment................................................................................................................... 62.3 PIN description....................................................................................................................62.4 Schematic diagram............................................................................................................ 72.5 Electronic parameter..........................................................................................................82.5.1 Basic parameter....................................................................................................... 82.5.2 Maximum parameter..............................................................................................92.5.3 Working Voltage......................................................................................................92.5.4 Working Current......................................................................................................92.5.5 External Crystal...................................................................................................... 102.5.6 TX parameter.......................................................................................................... 102.6 Dimensions.........................................................................................................................112.6.1 Mechanical dimensions....................................................................................... 112.6.2 Layout reference dimensions............................................................................................ 123. Process parameters.................................................................................................................... 133.1 Recommended temperature curve..............................................................................134. Package information.................................................................................................................. 135. Please be noticed following information and instructions should be placed in theend-user’s operating manual................................................................................................... 146. FCC Certification Requirement:...............................................................................................16
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/3/16Version:DataVersionEdit2017-02-15V0.01DraftKain2017-03-07V0.02Revised 2.2 PIN assignment2.3 PIN description2.4 Schematic diagramKain2017-3-20V0.03Revised DIO12 descriptionKain2017-4-13V1.00Released versionKain
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/4/161. Overview1.1 BriefBluetooth module STB1132-25 base on ST newest LE4.1 chipset BlueNRG1, establish abidirectional data transfer channel through UART interface between mobile phoneand client's MCU. According to the content of commands list, Client's MCU may sendthe corresponding commands to set the Bluetooth module into different condition,or send or receive data on GATT layer, Bluetooth module's status also can be readthrough commands.1.2 FeaturesSupport LE4.1Support OTA upgradeSupport UART upgradeStable and reliable performanceSupport UART commandUp to 8dBm TX power1.3 ApplicationBluetooth Printer/ScannerMobile paymentWireless health & fitness equipmentWireless toysSmart Household Electric Appliances
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/5/162. Hardware System2.1 Function blockSTB1132-25
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/6/162.2 PIN assignment2.3 PIN descriptionNo.NameDescriptionMark1SXTAL032.768KHz Xtal2SXTAL132.768KHz Xtal3GNDPOWER4DIO6I/O5DIO7I/O6GNDPOWER7SWCLK/DIO9Software download PINSoftware download PIN,suggest reserve on PCB8SWDIO/DIO10Software download PINSoftware download PIN,suggest reserve on PCB9DIO14I/O10VBATPOWER11RESTModule hardware reset12ADC1I/O
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/7/1613ADC2I/O14DIO13/Wake-upWhen module in sleep,lower level this PIN to wakeup modulePull down duration≥50ms15DIO12I/O16GNDPOWER17DIO0I/018UART_RXUART RX PIN19UART_TXUART TX PIN20DIO4I/O21DIO5I/O22DIO3/Mode_NMode select PINH: Data modeL: Command modeDefault: H23DIO2I/O24DIO1/UART_TX_INDTime delay control PIN forsending data from moduleto MCUDefault CloseCan use command to set upthe time delay25GNDPOWER2.4 Schematic diagram
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/8/16Note:1) 32.768KHz may save 2uA power consumption in Sleep mode, do not connect if notnecessary.2) Wake-up PIN is used to wake-up the module when it enter low power mode, pleaseconnect to MCU GPIO through pull-up resister R5. If this MCU GPIO with Pull-up function,then may connect to wake-up Pin directly.3) Mode-IN PIN is used to switch module between pure data mode & command mode,please connect to MCU GPIO through Pull-up resister R2. If this MCU GPIO with Pull-upfunction, then may connect to Mode-in PIN directly.4) TX-IND PIN is used to control the time delay before Module send data to MCU. Pleaseconnect to MCU GPIO through Pull-up resister R1.5) UART_RX/UART_TX, need add pull-up resister accordingly, suggest to reserve.6) P1 is the FW download port, please reserve if the PCB space is enough.2.5 Electronic parameter2.5.1 Basic parameterItemRangeWorking frequency band2400MHz~2500MHzProtocol specificationBT4.1Max TX power+8dBmRX sensitivity‐88dBmWork voltage1.7V~3.6VInterfaceUARTBaud rate4800~921600Size20.5mm(L) x14 mm(W) x 2.5mm(H)
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/9/162.5.2 Maximum parameterItemMin.Max.UnitVCC voltage-0.33.9VWorking temperature-2075℃Storage temperature-3085℃Working rangeTBD.TBD.a note：VCC=3.0v, data flow 2Kbyte/s, under open environment2.5.3 Working VoltageItemMin.Typ.Max.UnitVCC Voltage1.73.03.6V2.5.4 Working CurrentTest condition: Vcc=3.0v@，Ta=25℃ModeCurrent（Avg.）UnitNotesSleep Mode5uAStandbymode(Discoverable)40uANo advertising57uALE Reduced Poweradvertising interval = 300msBLE Connected400uANo data, connection interval= 20ms79uANo data, connection interval= 500ms2.39mA20byte/s,connection interval = 20ms2.92mA2Kbyte/s,connection interval = 20ms
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/10/162.5.5 External CrystalSB1132-20 may be connected with external 32.768KHz crystal, this may saveabout 2uA power consumption in sleep mode. Crystal request as below:ItemParameterMin.Typ.Max.UnitfNOMNominalfrequency32.768KHzfTOLFrequencytolerance±50ppmESREquivalentseriesresistance90kΩPDDrive level0.1µW2.5.6 TX parameterItemMin.Typ.Max.UnitMaximum RF transmit power8dBmLE Sensitivity-85dBm
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/11/162.6 Dimensions2.6.1 Mechanical dimensions
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/12/162.6.2 Layout reference dimensionsLayout note:The ANT area please keep clearance, do not routing & copper.Filter CAP please place close to module.Non strong interference line under module.
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/13/163. Process parameters3.1 Recommended temperature curveReferred to IPC/JEDEC standard.Peak Temperature : <250°CNumber of Times : ≤2 times4. Package informationTBD
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/14/165. Please be noticed following information and instructionsshould be placed in the end-user’s operating manualThe MODEL STB1132 has been granted as limited modular approval for mobile applications.MODEL STB1132 must be installed in the designated host as specified in this manual.1. Separate approval is required for all other operating configurations, including portable configurations withrespect to 2.1093 and different antenna configurations.2. The MODEL STB1132 and its antenna must not be co-located or operating in conjunction with any othertransmitter or antenna within a host device. This equipment complies with FCC RF radiation exposure limitsset forth for an uncontrolled environment.3. A label must be affixed to the outside of the end product into which the MODEL STB1132 module isincorporated, with a statement similar to the following: For MODEL STB1132: This device contains FCC ID:2AJ22STB1132.4. The module shall be in non-detachable construction protection into the finished products, so that the end-userhas to destroy the module while remove or install it.5. This module is to be installed only in mobile or fixed applications. According to FCC part 2.1091(b) definitionof mobile and fixed devices is:.Mobile device:A mobile device is defined as a transmitting device designed to be used in other than fixed locations and togenerally be used in such a way that a separation distance of at least 20 centimeters is normally maintained betweenthe transmitter’s radiating structure(s) and the body of the user or nearby persons. In this context, the term ‘‘fixedlocation’’ means that the device is physically secured at one location and is not able to be easily moved to anotherlocation.Portable device:For purposes of this section, a portable device is defined as a transmitting device designed to be used so that theradiating structure(s) of the device is/are within 20 centimeters of the body of the user.
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/15/166. Separate approval is required for all other operating configurations, including portable configurations withrespect to FCC Part 2.1093 and different antenna configurations.7. A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanentlyaffixed label, the module must be labelled with an FCC ID: 2AJ22STB1132. The OEM manual must provideclear instructions explaining to the OEM the labelling requirements, options and OEM user manual instructions thatare requiredFor a host using a this FCC certified modular with a standard fixed label, if (1) the module’s FCC ID is notvisible when installed in the host, or (2) if the host is marketed so that end users do not havestraightforward commonly used methods for access to remove the module so that the FCC ID ofthe module is visible; then an additional permanent label referring to the enclosed module:“Contains Transmitter Module FCC ID: 2AJ22STB1132” or “Contains FCC ID: 2AJ22STB1132” mustbe used. The host OEM user manual must also contain clear instructions on how end users canfind and/or access the module and the FCC ID.8. Host product is required to comply with all applicable FCC equipment authorizations regulations,requirements and equipment functions not associated with the transmitter module portion. compliance must bedemonstrated to regulations for other transmitter components within the host product; to requirements forunintentional radiators (Part 15B). To ensure compliance with all non-transmitter functions the host manufactureris responsible for ensuring compliance with the module(s) installed and fully operational. If a host was previouslyauthorized as an unintentional radiator under the Declaration of Conformity procedure without a transmittercertified module and a module is added, the host manufacturer is responsible for ensuring that the after the moduleis installed and operational the host continues to be compliant with the Part 15B unintentional radiator requirements.Since this may depend on the details of how the module is integrated with the host, we suggest the host device torecertify part 15B to ensure complete compliance with FCC requirement: Part 2 Subpart J Equipment AuthorizationProcedures , KDB784748 D01 v07, and KDB 997198 about importation of radio frequency devices into the UnitedStates.
深圳市中易腾达科技股份有限公司iTON Technology Corp. STB1132-25http://www.sziton.com/16/166. FCC Certification Requirement:The end product with an embedded - MODEL STB1132 may also need to pass the FCC Part 15unintentional emission testing requirements and be properly authorized per FCC Part 15.Note: If this module is intended for use in a portable device, you are responsible for separateapproval to satisfy the SAR requirements of FCC Part 2.1093.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation.Changes or modifications made to this equipment not expressly approved by iTon Technology Corp.may void the FCC authorization to operate this equipment.

Navigation menu