Itron 100GDLCN AMR transceiver device for utility meters User Manual

Itron Inc AMR transceiver device for utility meters 100G Datalogging Installation Guide Direct Mount

a href="https://usermanual.wiki/Itron" itemprop="url"> Itron >

Users Manual 2

    Gas Solutions 100G Datalogging Installation Guide - Direct Mount  TDC-0823-005
  Identification 100G Datalogging Installation Guide - Direct Mount  07/28/2010   TDC-0823-005      Endpoint part numbers: 100G Endpoint: ERG-5000-001, ERG-5000-002, ERG-5000-003, ERG-5000-004, ERG-5000-005, ERG-5000-006, ERG-5000-007, ERG-5000-008 100G Datalogging Endpoint: ERG-5002-001, ERG-5002-002, ERG-5002-003, ERG-5002-004, ERG-5002-007, ERG-5002-008  Copyright ©  2009 - 2010 Itron, Inc. All rights reserved. Confidentiality Notice The information contained herein is proprietary and confidential and is provided subject to the condition that (i) it be held in confidence except to the extent required otherwise by law and (ii) it is used only for the purposes described herein. Any third party given access to this information shall be similarly bound in writing. Trademark Notice Itron is a registered trademark of Itron, Inc. All other product names and logos in this documentation are used for identification purposes only and may be trademarks or registered trademarks of their respective companies. Applicable Patents U.S. Patent Numbers: 4,614,945; 4,753,169; 4,768,903; 4,799,059; 4,867,700 Canadian Patent Numbers: 1,254,949; 1,267,936; 1,282,118  Compliance Statement This device complies with Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Operation is subject to the following two conditions:       • This device may not cause harmful interference.       • This device must accept any interference that may cause undesirable operation.   This device must be permanently mounted such that it retains a distance of 20 centimeters (7.9 inches) from all persons in order to comply with FCC RF exposure levels.   Compliance Statement  This equipment has been tested and found to comply with the limits, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  Operation is subject to the following conditions:      • This device may not cause interference.      • This device must accept any interference that may cause undesired operation of the device.  Compliance Statement   This equipment complies with policies RSS-210 and RSS-GEN of the Industry Canada rules.   Operation is subject to the following two conditions:       (1) this device may not cause interference, and       (2) this device must accept any interference, including interference that may cause undesired operation of the device.   Transportation Classification The Federal Aviation Administration prohibits operating transmitters and receivers on all commercial aircraft. When powered, the 100G Datalogging Endpoint is considered an operating transmitter and receiver and cannot be shipped by air. All product returns must be shipped by ground transportation. Modifications and Repairs To ensure system performance, this device and antenna shall not be changed or modified without the expressed approval of Itron. Any unauthorized modification will void the user's authority to operate the equipment.  Meter Installation/Removal In the event of malfunction, all repairs should be performed by Itron. It is the responsibility of users requiring service to report the need for service to Itron.  Warning  Follow these procedures to avoid injury to yourself or others:    The lithium battery may cause a fire or chemical burn if it is not disposed of properly.   Do not recharge, disassemble, heat above 100º Celsius (212º Fahrenheit), or incinerate the lithium battery.   Keep the lithium battery away from children.   Replace the lithium battery only with batteries meeting Itron specifications. Any other battery may cause a fire or explosion.  Warning  Only authorized Itron personnel should attempt repairs on Itron equipment. Attempts to do so by others might void any maintenance contract with your company. Unauthorized service personnel might also be subject to shock hazard on some Itron equipment if removal of protective covers is attempted.  Warning To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing.  Warning  Substitution of components may impair intrinsic safety.
Download:
Mirror Download [FCC.gov]
Document ID1367991
Application IDDkMfhGbUYp377M3D+n42hA==
Document DescriptionUsers Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize213.84kB (2673032 bits)
Date Submitted2010-10-29 00:00:00
Date Available2010-10-29 00:00:00
Creation Date2010-07-28 11:36:50
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2010-09-15 13:39:41
Document Title100G Datalogging Installation Guide - Direct Mount
Document CreatorMicrosoft® Office Word 2007
Document Author: TDC-0823-005
FCC ID Filing: EWQ100GDLCN

Navigation menu