Itron 100WD AMR transceiver decive for utility meters User Manual

Itron Inc AMR transceiver decive for utility meters Users Guide 1

a href="https://usermanual.wiki/Itron" itemprop="url"> Itron >

Installation Guide 2

Installing the 100W-R/100W-R+ and 100WP-R/100WP-R+ ERT Module   TDC-0951-006 100W-R/100W-R+ and 100WP-R/100WP-R+ Datalogging ERT Module Installation Guide 17   Proprietary and Confidential     2. Align the ERT module backplate with the mounting screw holes. Verify the Itron logo and arrow point up.   3. Insert a backplate mounting screw in one corner and tighten two to three turns. Insert the remaining three screws, tightening a few turns.  4. Completely tighten all the screws in an alternating fashion.   To attach an encoder/pulser and leak sensor backplate 1. Route the register cable and Leak Sensor cable through the dual-port backplate. Ensure the cable strain reliefs are inside the module housing and backplate assembly.
Download:
Mirror Download [FCC.gov]
Document ID1841266
Application IDhTnErGhmRK3ioc4e42clpw==
Document DescriptionInstallation Guide 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize156.87kB (1960887 bits)
Date Submitted2012-11-20 00:00:00
Date Available2012-11-21 00:00:00
Creation Date2012-11-12 12:14:03
Producing SoftwareAdobe PDF Library 10.0
Document Lastmod2012-11-12 12:14:03
Document Title100W-R.100W-R+ and 100WP-R/100WP-R+ Datalogging ERT Module Installation Guide
Document CreatorAcrobat PDFMaker 10.1 for Word
Document Author: TDC-0951-006
FCC ID Filing: EWQ100WD

Navigation menu