Itron 100WD AMR transceiver decive for utility meters User Manual

Itron Inc AMR transceiver decive for utility meters Users Guide 1

a href="https://usermanual.wiki/Itron" itemprop="url"> Itron >

Users Manual 3

Installing  the 100W/100W+ and 100WP/100WP+ ERT Module   TDC-0909-006 100W/100W+ and 100WP/100WP+ Datalogging Water ERT Module Installation Guide 20  Proprietary and Confidential    Shelf Mount Installation This section  describes 100W/100W+ and 100WP/100WP+ ERT module  installation  using a shelf mount adapter to mount the ERT module in a pit lid slot.  Caution  Observe the following guidelines for mounting the ERT module using the shelf mount procedure: • ERT module positioning  other than upright could negatively  affect radio performance and battery life. • Use only Itron-approved  splice kits or inline connectors.  The pit lid and slot must have the correct dimensions for the ERT module assembly to fit properly. The following  illustration  and the accompanying  table  give  pit lid  slot dimensions  for the shelf mount installation method.   Pit Lid Slot Dimensions Dimension Minimum (inches) Maximum (inches) A  6 3/4 N/A B  2  5 3/4 C  3/4  1   Required Hardware Itron 100W Series Shelf Mount Kit  To install using the shelf mount adapter 1. With the foam spacers facing  up, insert the shelf mount adapter into the opening  in the disk.
Download:
Mirror Download [FCC.gov]
Document ID1841293
Application IDdNA2HwT8TAzP7LdoA6YzxA==
Document DescriptionUsers Manual 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize198.4kB (2479989 bits)
Date Submitted2012-11-20 00:00:00
Date Available2012-11-21 00:00:00
Creation Date2012-11-08 11:24:39
Producing SoftwareAdobe PDF Library 10.0
Document Lastmod2012-11-08 11:26:37
Document Title100W and 100WP Datalogging Water ERT Module Installation Guide
Document CreatorAcrobat PDFMaker 10.1 for Word
Document Author: TDC-0909-006
FCC ID Filing: EWQ100WD

Navigation menu