Itron AMI7 AMI7 Module User Manual Manual Cover

Download:
Mirror Download [FCC.gov]
Document ID	1459875
Application ID	65EBTxdE4RgB/RIXsGsPWw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.9kB (86280 bits)
Date Submitted	2011-05-05 00:00:00
Date Available	2011-05-06 00:00:00
Creation Date	2011-05-04 16:01:22
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2011-05-04 16:01:22
Document Title	Microsoft Word - Manual Cover.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	courtney.merrick

Certification Exhibit
FCC ID: SK9AMI7
IC: 864G-AMI7
FCC Rule Part: 15.247
IC Radio Standards Specification: RSS-210
ACS Report Number: 11-0093.W06
Manufacturer: Itron Electricity Metering, Inc.
Model: AMI7
Manual
5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598
User Information Manual
Itron Module Model AMI7
Labeling
The following requirements will be applied to any products that use this module:
The end product label will include the following text:
 *Contains:
 FCC ID: SK9AMI7
 IC: 864G-AMI7, Model: AMI7
*NOTE: Since the module ID numbers are visible from outside the end product the word “CONTAINS” may be
omitted.
The user’s manual for any product that contains this module will contain the following text. If the device is large
enough, then this will also be placed on the label.
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.”
Regulatory Compliance
The user’s manual for any product that contains this module will contain the following text:
FCC Part 15, Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
Cet appareillage numérique de la classe B répond à la norme Canadienne sur le matériel brouilleur. L'opération est
sujette aux deux conditions suivantes: (1) ce dispositif ne peut pas causer d'interférence nocive, et (2) ce dispositif
doit accepter n'importe quelle interférence reçue, y compris les interférences pouvant entraîner un fonctionnement
indésirable.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other
users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
not more than that necessary for successful communication.
RF Exposure
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
Miscellaneous
The user’s manual for any product that contains this module will contain the following text:
Professional Installation
This module is intended for professional installation by the integrator. The OEM integrator is still responsible for the
FCC compliance requirement of the end product, which integrates this module.
Modification and Repairs
To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be
changed or modified without the express written approval of Itron. Any unauthorized modification will void the
user’s authority to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to
repair this device by unauthorized personnel may subject the person to shock hazard if removal of protective covers
is attempted. Unauthorized repair will void the warranty and/or maintenance contract with your company.
General Description
The Itron AMI7 is an electricity metering module which includes the register and display features for the meter as well
as a Zigbee transmitter that operates in the 2405 MHz to 2475 MHz band and a LAN transmitter that operates in the
902 MHz to 928 MHz band. The module operates on alternating current voltage which is supplied by a host device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : courtney.merrick
Create Date                     : 2011:05:04 16:01:22-04:00
Modify Date                     : 2011:05:04 16:01:22-04:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2011:05:04 16:01:22-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - Manual Cover.doc
Creator                         : courtney.merrick
Document ID                     : uuid:e0608e03-f17a-4cdf-b592-f189ee7fc186
Instance ID                     : uuid:38daf0a6-eaab-4996-81a0-dbe9bd18d3d6
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 4

EXIF Metadata provided by EXIF.tools