Itron HHSR3 AMR radio module User Manual HHSR3 integration spec

Itron, Inc. AMR radio module HHSR3 integration spec

Users Manual

ENG- Page 1 of 3 ITRON CONFIDENTIAL Integration Spec TITLE: HHSR3 Integration requirements spec AUTHOR: Drew Rosenberg REV CCO DESCRIPTION OF CHANGE DATE AUTHOR REVISION HISTORY NOTICE OF PROPRIETARY INFORMATION Information contained herein is proprietary and is property of ITRON, Inc. where furnished with a proposal, the recipient shall use it solely to evaluate the proposal. Where furnished to a customer it shall be used solely for the purposes of inspection, installation, or maintenance. Where furnished to a supplier, it shall be used solely in the performance of work contracted for this company. The information shall not be used or disclosed by the recipient for any other purpose whatsoever.
Integration Spec ENG- Table of Contents HHSR3 Integration requirements spec Table of Contents Page 2 of 3 Rev. A 1. Table of Contents 1. TABLE OF CONTENTS ........................................................................................................... 2 2. SCOPE OF THIS DOCUMENT ................................................................................................ 3 3. TECHNICAL REQUIREMENTS ............................................................................................... 3 4. LABELING REQUIREMENTS ................................................................................................. 3 5. USERS MANUAL STATEMENTS ........................................................................................... 3
Integration Spec ENG- Scope of this Document HHSR3 Integration requirements spec Users Manual Statements Page 3 of 3 Rev. A 2. Scope of this Document This document lists everything that is required for maintaining the conditions of the limited modular approval that applies to the HHSR3 module (FCC ID EO9HHSR3, IC ID 864A-HHSR3). 3. Technical Requirements This module may only be installed in battery-powered devices. Uses that require power from line voltage are not allowed under the conditions of this limited modular approval. 4. Labeling Requirements The label on the final product must say the following: Contains FCC ID: EO9HHSR3 IC: 864A-HHSR3 5. Users Manual Statements The following statements must be included in the users manual: ELECTROMAGNETIC COMPATIBILITY Use only approved accessories with this equipment. Unapproved modifications or operation beyond or in conflict with these instructions for use, may void authorization by the authorities to operate the equipment. This device has been designed to operate with the antennas listed below, and having a maximum gain of 2.1 dB. Antennas not included in this list or having a gain greater than 2.1 dB are strictly prohibited for use with this device. The required antenna impedance is 50-ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF EXPOSURE To comply with the FCC requirements, maintain a separation distance of at least 20.0 centimetres between the antenna and all persons.

Navigation menu