Itron ITR900-1 ITR900 Utility Meter Module User Manual XX XXXX Exhibit Cover
Itron Electricity Metering, Inc. ITR900 Utility Meter Module XX XXXX Exhibit Cover
Itron >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1251853 |
| Application ID | Qel4X8R5cWGu0HgS80icJQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 6.86kB (85778 bits) |
| Date Submitted | 2010-03-12 00:00:00 |
| Date Available | 2010-03-16 00:00:00 |
| Creation Date | 2010-01-29 15:13:56 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2010-01-29 15:13:56 |
| Document Title | Microsoft Word - XX-XXXX - Exhibit Cover |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Kirby.Munroe |
Certification Exhibit FCC ID: SK9ITR900-1 IC: 864G-ITR9001 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Report Number: 10-0009-15C Manufacturer: Itron Electricity Metering, Inc. Model: ITR900 Manual 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598 User Information Manual Itron Module Model ITR900 Labeling The following requirements will be applied to any products that use this module: The end product label will include the following text: Contains: FCC ID: SK9ITR900-1 IC: 864G-ITR9001, Itron Module ITR900 The user’s manual for any product that contains this module will contain the following text. If the device is large enough, then this will also be placed on the label. “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” Regulatory Compliance The user’s manual for any product that contains this module will contain the following text: FCC Part 15, Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Industry Canada This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareillage numérique de la classe B répond à la norme Canadienne sur le matériel brouilleur. L'opération est sujette aux deux conditions suivantes: (1) ce dispositif ne peut pas causer d'interférence nocive, et (2) ce dispositif doit accepter n'importe quelle interférence reçue, y compris les interférences pouvant entraîner un fonctionnement indésirable. “To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.” “This device has been designed to operate with the antennas listed below, and having a maximum gain of 5.1dB. Antennas not included in this list or having a gain greater than 5.1dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.” Listed Antennas* Manufacturer: Comet Model Number: R-2000 Gain: 5.1 dB Connector: N-male *Antennas of equal or lesser gain and same type may be substituted. RF Exposure The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Miscellaneous The user’s manual for any product that contains this module will contain the following text: Professional Installation This module is intended for professional installation by the integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. Modification and Repairs To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall not be changed or modified without the express written approval of Itron. Any unauthorized modification will void the user’s authority to operate the equipment. WARNING! This device contains no user serviceable parts. Attempts to repair this device by unauthorized personnel may subject the person to shock hazard if removal of protective covers is attempted. Unauthorized repair will void the warranty and/or maintenance contract with your company. General Description The Itron ITR900 is a transmitter module that operates in the 902 MHz to 928 MHz unlicensed band. The module operates on direct current voltage which is supplied by a host device.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Kirby.Munroe Create Date : 2010:01:29 15:13:56-05:00 Modify Date : 2010:01:29 15:13:56-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2010:01:29 15:13:56-05:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - XX-XXXX - Exhibit Cover Creator : Kirby.Munroe Document ID : uuid:4604daaf-49c6-493a-bd90-e37f4a04ecda Instance ID : uuid:0991436b-5d4f-449c-8189-3747ba71fa31 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 4EXIF Metadata provided by EXIF.tools