Itron KVEVDOZ41 Kv2c-AMPZ User Manual 13 0462 Exhibit Cover

IC: 4393B-KVEVDOZ41

The user’s manual for any product that contains this module will contain the following test. If the device is

large enough, this information will also placed on the label:

“THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS. (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,

AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.”

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada].

Operation is subject to the following two conditions:

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

Under Industry Canada regulations, this radio transmitter may only operate using antenna of a type and

maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so chosen that the equivalent

isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

En vertu de la réglementation d'Industrie Canada, cet émetteur radio peut fonctionner uniquement à l'aide

de l'antenne d'un type et maximale (ou moins) obtenir une approbation pour l'émetteur par Industrie

Canada. Pour réduire les interférences radio potentielles à d'autres utilisateurs, le type d'antenne et son

gain doivent être choisie que la puissance isotrope rayonnée équivalente (p.i.r.e.) n'est pas plus que celui

The user’s manual for any product that contains this module will contain the following text:

This module is intended for professional installation by the integrator. The OEM integrator is still

responsible for the FCC compliance requirement of the end product which uses this module.

To ensure FCC compliance and system performance, this device, antenna and/or coaxial assembly shall

not be changed or modified without the express written approval of Itron. Any unauthorized modification

will void the user’s authority to operate the equipment.

The Itron 570973-001 (kV2c-AMPZ) is an electricity metering module which includes a Cellular EVDO

WAN module operating in the GSM 800 MHz and PCS 1900 MHz bands and a HAN transmitter operating

in the 2.4 GHz band. The module operates on direct current which is supplied by the host meter device.

4393B-KVEVDOZ41 has been approved by Industry Canada to operate with the antenna types listed

below with the maximum permissible gain and required antenna impedance for each antenna type

indicated.Antenna types not included in this list, having a gain greater than the maximum gain indicated

for that type, are strictly prohibited for use with this device.

4393B-KVEVDOZ41 a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne

d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal

indiqué, sont strictement interdits pour l'exploitation de l'émetteur.