Itron NIC714 Radio module for electric meter User Manual NIC714 UG

Download:
Mirror Download [FCC.gov]
Document ID	1723582
Application ID	oVEhfy1CCbktPGN4/X9sPQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	95.93kB (1199156 bits)
Date Submitted	2012-06-15 00:00:00
Date Available	2012-10-01 00:00:00
Creation Date	2012-05-05 16:06:43
Producing Software	Mac OS X 10.6.8 Quartz PDFContext
Document Lastmod	2012-05-06 18:07:58
Document Title	NIC714_UG.book
Document Creator	FrameMaker 9.0
Document Author:	kvanlaan

I-210+ NIC and Meter Labeling
Product Requirements
Silver Spring Networks
555 Broadway Street
Redwood City, CA 94063
www.silverspringnet.com
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 1
I-210+ NIC and Meter Labeling Product Requirements
Confidential Information of Silver Spring Networks, Inc., provided under nondisclosure obligations.
Copyright © 2012 Silver Spring Networks, Inc. All rights reserved.
The Silver Spring Networks logo, UtilityIQ®, and UtilOS® are registered trademarks of Silver Spring Networks, Inc.
GridScape™™ and CustomerIQ™™ are trademarks of Silver Spring Networks, Inc.
All other company and product names are used for identification purposes only and may be registered trademarks,
trademarks, or service marks of their respective owners.
Please consider the environment before printing this document.
Customer Support
Country
Email
Telephone
Hours
Australia
aus-support@silverspringnet.com
1300 706 769
9:00 AM - 9:00 PM
Australia Eastern Time
Canada
support@silverspringnet.com
Toll free:
5:00 AM - 6:00 PM
1-888-SSN-9876
US Pacific Time
United States
(1-888-776-9876)
Worldwide
Contact us on the Web
+1-650-298-4298
http://www.silverspringnet.com/services/customer-support.html
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 2
I-210+ NIC and Meter Labeling Product Requirements
. Contents
Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Meter Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Meter Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Meter Auxiliary Label or NIC Address Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. NIC Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4. FCC and Government Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.1 FCC Guidelines for Devices Containing a Transmitter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3 General Electrical Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.4 Personal Protective Equipment (PPE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.5 Fall Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.6 Shock Accident First Aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
I-210+ NIC and Meter Labeling Product Requirements
11 April 2012
Silver Spring Networks 3
I-210+ NIC and Meter Labeling Product Requirements
1. Introduction
Introduction
The I-210+ NIC is a FCC Part 15.247 compliant device that enables communication between
Silver Spring Networks AMI network and the I-210+ family of meters. The NIC transmits in the
902 to 928 MHz, ISM band and transfers data from the utility meter to Silver Spring Networks
Relays and Gateways.
Figure 1. I-210+ NIC and meter
1.1 References
Guidelines for 64-bit Global Identifier (EUI-64™™) Registration Authority, IEEE Standards
Association.
Meter Labeling
2.1 Meter Nameplate
The meter nameplate shall not contain information pertaining to the Silver Spring Networks
radio.
Figure 2. Example of meter nameplate label
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 4
I-210+ NIC and Meter Labeling Product Requirements
2. Meter Labeling
2.2 Meter Auxiliary Label or NIC Address Label
For radio identification, the I-210+ meter shall have an auxiliary label containing the Silver
Spring Networks NIC address presented in text (16 alphanumeric digits) and barcode formats.
••
Bar Code Type = Code 3 of 9
••
Bar Code Font Size = unknown
••
Font Type = unknown
••
Font Size = unknown
••
Bar Code Label Dimensions = 1.50" x 0.25"
••
Bar Code Material Type = Static Dissipative Polyimide
Figure 3 shows an example of the NIC address label, which is consistent with FCC requirements
set forth in section 4.1, and contains the Silver Spring Networks corporate name and NIC EUI-64
address.
Figure 3. Example of NIC address label
Silver Spring Networks
1234567890123456
Contains
FCC ID: OWS-NIC714, IC: 5975A-NIC714
The NIC address label shall be placed on the meter nameplate in the location identified by ““Label
A”” in the following figure.
Figure 4. Nameplate NIC address locations
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 5
I-210+ NIC and Meter Labeling Product Requirements
3. NIC Labeling
NIC Labeling
The Silver Spring Networks I-210+ NIC has two labels relevant to meter final assembly and RMA:
the FCC and GE Part Number label and the Silver Spring NIC Address label. Both labels are
located on the top side of the NIC PCA. The barcode format is Code 3 of 9.
Figure 5 shows an example of the FCC ID label that can be found on the NIC. The size of the label
is 1.5" x 1.0" inches. The barcode format is Code 3 of 9.
Figure 5. FCC ID label for NIC PCA
GE PN 123S123456
SSN Catalog 123-456789
FCC ID: OWS-NIC714
IC: 5975A-NIC714
This device complies
with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
996-000015A
Figure 6 is an example of the NIC address label that can be found in the location indicated in
Figure 7. The barcode format is Code 3 of 9.
Figure 6. NIC address label for NIC PCA
1234567890123456
Figure 7. Label locations on I-210+ NIC PCA
Silver Spring part
number
FCC label goes here
MAC address
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 6
I-210+ NIC and Meter Labeling Product Requirements
4. FCC and Government Guidelines
FCC and Government Guidelines
Silver Spring Networks NIC
FCC ID: OWS-NIC714 IC: 5975A-NIC714
The I-210+ NIC is REQUIRED to be professionally installed by a properly trained technician.
Improper installation could void the user's authority to operate the equipment.
The device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. The device may not cause harmful interference.
2. The device must accept any interference received, including interference that may cause
undesired operation.
Figure 8. Sample FCC ID label for NIC PCA
FCC ID: OWS-NIC714
IC: 5975A-NIC714
This device complies
with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
The antenna of this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The device should be installed so that people will not come within 20 cm (8 in.) of the antenna.
This equipment has been tested and found to comply with Part 15 of the FCC Rules. This
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception (which can be
determined by turning the equipment off and on), the user is encouraged to try to correct the
interference by one or more of the following measures:
••
Reorient or relocate the receiving antenna.
••
Increase the separation between the equipment and receiver.
••
Connect the equipment into an outlet on a circuit different from that to which the receiver
disconnected.
••
Consult the dealer or an experienced Radio/TV technician for help.
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 7
I-210+ NIC and Meter Labeling Product Requirements
4. FCC and Government Guidelines
CAUTION: Changes or modifications not expressly approved by Silver Spring Networks could
void the user's authority to operate the equipment.
4.1 FCC Guidelines for Devices Containing a Transmitter Module
The following is an extract from FCC PART 15 UNLICENSED MODULAR TRANSMITTER
APPROVAL, DA 00-1407, Released: June 26, 2000, Section 6 describing labeling requirements
for devices containing a modular transmitter.
Section 6. The modular transmitter must be labeled with its own FCC ID number, and, if the
FCC ID is not visible when the module is installed inside another device, then the outside of
the device into which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following: ““Contains
Transmitter Module FCC ID: XYZMODEL1”” or ““Contains FCC ID: XYZMODEL1.”” Any
similar wording that expresses the same meaning may be used. The Grantee may either
provide such a label, an example of which must be included in the application for equipment
authorization, or, must provide adequate instructions along with the module which explain
this requirement.
In the latter case, a copy of these instructions must be included in the application for equipment
authorization.
Figure 9. Sample FCC ID label for devices containing a NIC
Contains FCC ID: OWS-NIC714
IC: 5975A-NIC714
4.1.1 External Antenna Integration
This radio transmitter 5975A-NIC714 has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required antenna impedance
for each antenna type indicated. Antenna types not included in this list, having a gain greater
than the maximum gain indicated for that type, are strictly prohibited for use with this device.
••
Omnidirectional, 6dBi antennas
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro
de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et
l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste,
ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.
••
Antennes 6dbi omnidirectionelle
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 8
I-210+ NIC and Meter Labeling Product Requirements
4. FCC and Government Guidelines
4.2 Safety Information
WARNING: Severe shock and explosion hazard! Touching energized parts can result in
massive equipment damage, and severe injury or death. Short-circuiting energized parts
will result in blinding flash and explosion. Opening and closing electrical circuits can
also produce dangerous and explosive arc flashes. Involuntary muscular reactions
associated with electrical shock may result in other injuries. Observe the following safety
guidelines.
Careful planning of every job is essential. Nothing should be taken for granted. Do not take
chances!
••
Read and follow all approved policies and procedures provided by your employer associated
with the procedures in this manual.
••
The procedures in this manual must only be performed by qualified workers in accordance
with local utility safety practices, utility requirements, and applicable OSHA and NFPA
standards.
••
The information contained in this document is intended to aid qualified personnel, and is not
a replacement for the proper training required to make a person qualified.
••
Silver Spring Networks assumes no liability for the customer's failure to follow these safety
guidelines.
4.3 General Electrical Safety
••
Perform the procedures in this manual in accordance with applicable workplace standards
established by the following agencies:
—— Occupational Safety and Health Act (OSHA).
—— The National Electrical Code published by the National Fire Protection Association
(NFPA-70).
—— National Electrical Manufacturers Association (NEMA).
—— Electronics Industries Association (EIA).
—— Insulated Power Cable Engineers Association (IPCEA).
••
American National Standards Institute (ANSI). Whenever possible, de-energize all circuits or
equipment before working on them.
••
Maintain a minimum clearance of 10 feet (3 meters) between line potential and all
unqualified persons at all times.
••
Keep unauthorized people out of the work area. Be especially cautious of children, who tend
to be drawn to work activity.
••
Determining if a circuit is OFF can be difficult in some instances. Check for circuit voltage
with an appropriate voltmeter before working on equipment presumed to have been de-
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 9
I-210+ NIC and Meter Labeling Product Requirements
4. FCC and Government Guidelines
energized. Tiebreakers, double throw disconnect switches, automatic transfer switches and
emergency generators can supply power through an alternate circuit or from another source.
••
120V current can be just a lethal as higher voltages because current flow through a body
depends upon the body's resistance.
••
Do not trust insulation and/or weatherproofing on a wire as protection from shock.
••
Use electrically insulated tools. Inspect portable electrical equipment or tools for defects and
remove any defective devices from service immediately. All portable electrical equipment
must have Ground Fault Circuit Interrupter (GFCI) protection.
••
Select the right tool for the job. Use tools properly. Keep tools in good working order.
••
Make sure the work area is free of any flammable material. Flammable vapors can be ignited
by an arc flash.
••
Keep the work area clean and dry. Cluttered work areas cause accidents and injuries.
••
Provide good lighting in the work area. You cannot work safely if you cannot see what you are
doing.
••
Report unsafe conditions or defective equipment to your immediate supervisor.
••
Handle material carefully. Lift and carry properly.
4.4 Personal Protective Equipment (PPE)
••
Always wear Personal Protective Equipment (PPE), in accordance with OSHA and ANSI
standards.
••
Wear eye protection and electrically insulated gloves. Test gloves in accordance with ANSI
standards before use. Do not use gloves that do not pass appropriate test procedures.
••
Wear protective clothing such as long sleeve shirts and long pants made of flame resistant
materials.
••
Remove all jewelry.
••
Do not pass any objects to or from other persons not protected by insulating platforms or
tested, electrically insulated gloves.
4.5 Fall Protection
When performing work at any elevation:
••
Always use a fall protection system, in accordance with OSHA standards, whenever
performing work at any elevation.
••
Never use conductors, guy wires, pins, or cross-arm braces, etc. to support your weight.
••
Whenever using aerial lift devices such as hoists, man-lifts, vehicle-mounted work platforms
and overhead lifts, read and follow the manufacturer's guidelines for safe and proper
operation.
••
Use ladders and scaffolding only in accordance with the manufacturer's guidelines and/or
according to OSHA standards.
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 10
I-210+ NIC and Meter Labeling Product Requirements
4. FCC and Government Guidelines
••
Only use ladders made of non-metallic, non-conductive material. They should be the proper
size and type for the work intended. Inspect ladders for wear and breakage. Remove any oil,
grease, or other slippery materials.
••
Do not set the ladder at too steep or too shallow of an angle. A rule of thumb is to stand erect
with your toes against the bottom rails of the ladder, with your arms extended straight out. If
you can set your palms on top of the rung that is at eye level, the ladder should be at the
proper angle. If a ladder angle label is provided, follow its recommendations.
••
If the ladder is to remain in place for an extended period, secure it at the top. The support
point at the top of the ladder should be at least 24 inches (60 centimeters) wide to maintain
support in the event of sideways movement. For jobs of short duration, have a fellow worker
support the ladder at the base.
••
Evaluate all tasks to be performed from a ladder for potential fall hazards, such as complex
tasks or situations that require leaning from the side of the ladder.
••
The use of scaffolding or a work platform should be considered as an alternative solution in
such cases.
4.6 Shock Accident First Aid
••
Do not touch the victim with your bare hands; use something non-conductive to separate the
victim from the energy source.
••
Call for emergency medical help immediately. Keep the victim lying down, warm, and
comfortable until help arrives. Avoid moving the victim in case of injury to neck or back.
Position an unconscious victim on a side to let fluids drain.
••
Check the victim's breathing and heartbeat. If properly trained, apply mouth-to-mouth
resuscitation and/or CPR if necessary.
••
Remove constricting items from the victim, such as shoes, belts, jewelry, and tight collars;
they could cut off circulation if the victim experiences swelling.
••
Apply water or saline for a few minutes to any burns until the skin returns to normal
temperature. Do not attempt to remove clothing that is stuck to a burn. If possible, elevate
burned areas to reduce swelling.
••
Make sure the victim receives professional medical attention, even if they feel fine. Electric
shock can cause heart failure hours after the shock is received.
CONFIDENTIAL AND PROPRIETARY
11 April 2012
Silver Spring Networks 11

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Create Date                     : 2012:05:05 16:06:43Z
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2012:05:06 18:07:58-07:00
Metadata Date                   : 2012:05:06 18:07:58-07:00
Format                          : application/pdf
Creator                         : kvanlaan
Title                           : NIC714_UG.book
Producer                        : Mac OS X 10.6.8 Quartz PDFContext
Document ID                     : uuid:15dbae4a-97e1-11e1-91aa-040cce202c34
Instance ID                     : uuid:15dbc2b8-97e1-11e1-91aa-040cce202c34
Page Count                      : 11
Author                          : kvanlaan

EXIF Metadata provided by EXIF.tools