Ives 2019 Product Catalog Architectural Hardware Products 105313
User Manual: Ives 2019 Ives Product Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 244
| Download | |
| Open PDF In Browser | View PDF |
Architectural hardware products Table of contents A Hinges & pivots Finish chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Packaging, Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi A - Hinges and pivots Architectural hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2 Continuous hinges - aluminum geared. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A17 Continuous hinges - pin and barrel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A38 Pivots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A52 B -Pulls and push plates B Pulls & plates Architectural pulls and pushbars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2 Decorative pulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B23 Long door pull. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B38 Push and pulls plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B40 Protection plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B46 Vandal resistant trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B48 Flush pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B57 Decorative flush pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B60 Sliding door pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B63 Screen door pull. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B65 C Flush bolts & coordinators C - Flush bolts & coordinators Automatic flush bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C2 Constant latching flush bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C6 Manual flush bolts and dust proof strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10 Coordinators - bar, gravity, carry bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C17 Latches, catches & bolts D - Latches, catches & bolts D Surface bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D2 Door guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D7 Roller latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D8 Angle stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D11 Latches/catches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D12 E - Stops E Stops Floor stops and holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E2 Wall stops/bumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E9 Wall holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E13 Kick down holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E15 Plunger door holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E17 Roller bumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E18 Residential door stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E19 Door silencers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E25 Crash stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E26 Exterior hardware F - Exterior hardware F Lock guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F2 Viewers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F5 Door knockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F7 Mail slots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F8 G - Miscellaneous hardware G Miscellaneous hardware Brackets & hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G2 Decorative hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G10 Window hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G14 Rescue hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G17 Index by product description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 by part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 Ives Architectural hardware products iii G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A Hinges & pivots Finishes IVES Finish ANSI/BHMA US Number Finish description Base material A3 666 US3 Bright brass, clear coat Aluminum A4 667 US4 Satin brass, clear coat Aluminum A5 --- US5 Brass, blackened, satin relieved Aluminum Aluminum A10 668 US10 Satin bronze, clear coat A10B 703 US10B Dark bronze, oil rubbed Aluminum A14 669 US14 Bright nickel, clear coat Aluminum A15 670 US15 Satin nickel, clear coat Aluminum A26 672 US26 Bright chrome Aluminum A26D 702 US26D Satin chrome Aluminum A-643E/716 --- --- Aged bronze, blackened, edge relieved Aluminum Aluminum A92 673 --- Aluminum clear coat A-BLK --- --- Matte black Aluminum A-W --- --- White Aluminum US27 627 US27 Satin aluminum, clear coated Aluminum 441 441 --- Satin stainless anodized Aluminum PA28 628 US28 Satin aluminum, clear anodized Aluminum 688 688 --- Satin brass anodized Aluminum 709 709 --- Satin bronze anodized Aluminum 710 710 313AN Dark bronze anodized Aluminum Aluminum 711 711 315AN Black anodized 712 712 --- Bright chrome anodized Aluminum 713 713 --- Satin chrome anodized Aluminum B3 605 US3 Bright brass, clear coat Brass/Bronze B4 606 US4 Satin brass, clear coat Brass/Bronze B5 609 US5 Satin brass, blackened, satin relieved Brass/Bronze B9 611 US9 Bright bronze, clear coat Brass/Bronze Brass/Bronze B10 612 US10 Satin bronze, clear coat B10B 613 US10B Dark bronze, oil rubbed Brass/Bronze 614 614 US10A Satin bronze, relieved, clear coated Brass/Bronze 616 616 US11 Satin bronze, blackened, clear coated Brass/Bronze B14 618 US14 Bright nickel, clear coat Brass/Bronze B15 619 US15 Satin nickel, clear coat Brass/Bronze B15A 620 US15A Satin nickel, blackened, satin relieved Brass/Bronze B26 625 US26 Bright chrome Brass/Bronze B26D 626 US26D Satin chrome Brass/Bronze Brass/Bronze US26D-AM --- --- Satin chrome, antimicrobial coating B-643E/716 --- --- Aged bronze, blackened, edge relieved Brass/Bronze B-BLK 622 --- Matte black Brass/Bronze US2G 603 US2G Zinc plated Steel F2C 604 US2C Zinc plated Steel F3 632 US3 Bright brass, clear coat Steel F4 633 US4 Satin brass, clear coat Steel Steel F5 638 US5 Satin brass, blackened, satin relieved F10 639 US10 Satin bronze, clear coat Steel F10B 640 US10B Dark bronze, oil rubbed Steel 641 641 US10A Oxidized brz, relieved, clear coated Steel 643 643 US11 Satin brz, blackened, relieved, clear Steel F14 645 US14 Bright nickel, clear coat Steel F15 646 US15 Satin nickel, clear coated Steel F15A 647 US15A Satin nickel, blackened, relieved, clear Steel F26 651 US26 Bright chrome Steel Steel F26D 652 US26D Satin chrome F-643E/716 --- --- Aged bronze, blackened, edge relieved Steel F-BLK 622 --- Matte black Steel F-W --- --- White Steel SP4 706 --- Dull brass painted All SP10 691 --- Dull bronze painted All iv Ives Architectural hardware products Finishes ANSI/BHMA US Number Finish description Base material 689 --- Aluminum painted All 695 --- Dark bronze painted All 622 --- Matte black All All USP 600 USP Primed for paint US32 629 US32 Bright stainless steel Stainless steel US32-316 629-316 US32-316 Bright stainless steel - 316 series Stainless steel - 316 US32D 630 US32D Satin stainless steel Stainless steel US32D-316 630-316 US32D-316 Satin stainless steel - 316 series Stainless steel - 316 --- Satin stainless steel Stainless steel --- Satin stainless, antimicrobial coating Stainless steel Zinc Z605 677 US3 Bright brass, clear coat 678 678 US4 Satin brass, clear coat Zinc Z609 --- US5 Satin brass, blackened, satin relieved Zinc Z613 704 US10B Dark bronze, oil rubbed Zinc Z619 --- US15 Satin nickel, clear coat Zinc 681 US26 Bright chrome Zinc --- US26D Satin chrome Zinc --- --- Aged bronze, blackened, edge relieved Zinc --- --- Matte black Zinc Zinc Z-W --- --- White CLR --- --- Clear Plastic BLK --- --- Matte black Rubber or plastic --- --- White Rubber or plastic --- --- Grey Rubber TAN --- --- Tan Rubber D Latches, catches & bolts WHT GRY C Z-643E/716 Z-BLK Flush bolts & coordinators Z625 682 B 654 --- Pulls & plates US32D US32D-AM A SP313 SPBLK Hinges & pivots IVES Finish SP28 E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products v Packaging key Many Ives items are available in a variety of packaging forms designated by a prefix. The Ives Price Book contains the specific packaging options for each Ives product. Below is a description of these options. Symbol Description of package SP Slim-Pak Door handing LH INSIDE Left hand RH Right hand OUTSIDE INSIDE C Flush bolts & coordinators B Pulls & plates A Hinges & pivots Packaging, Handing G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts LHR Left hand reverse vi Ives Architectural hardware products RHR Right hand reverse Architectural hinges, continuous hinges and pivots Hinges & pivots Table of contents C Flush bolts & coordinators Pivots General information................................................................................................................ A52 How to order............................................................................................................................. A53 7212 3/4" Offset pivot, 200lb with top header mount................................................... A54 7212V 3/4" Offset pivot, 200lb with top jamb mount.................................................... A54 7215 3/4" Offset pivot, 500lb with top header mount................................................... A55 7215F 3/4" Offset pivot, 500lb with top header mount, fire rated............................. A55 7222 3/4" Offset pivot, 200lb with top header mount and bottom base mount... A56 7226 3/4" Offset pivot, 600lb with top header mount and bottom base mount....A57 7226F 3/4" Offset pivot, 600lb with top header mount and bottom base mount, fire rated...................................................................................................................A57 7227 3/4" Offset pivot, 700lb with top header mount and bottom base mount.... A58 7227F 3/4" Offset pivot, 700lb with top header mount and bottom base mount, fire rated.................................................................................................................. A58 7230F 3/4" Offset pivot, 1000lb with top header mount and bottom base mount, fire rated.................................................................................................................. A59 7237F 3/4" Offset pivot, 1750lb with top header mount and bottom base mount, fire rated..................................................................................................................A60 7244F 1 1/2" Offset pivot, 400lb with top header mount and bottom base mount, fire rated...................................................................................................................A61 7245F 1 1/2" Offset pivot, 500lb with top header mount and bottom base mount, fire rated.................................................................................................................. A62 7212-7212V-7222 INT 3/4" Offset intermediate pivot..................................................... A63 7215-7226-7227 INT 3/4" Offset intermediate pivot.......................................................A64 7215F-7226F-7227F INT 3/4" Offset intermediate pivot, fire rated.............................A64 7230F-7237F INT 3/4" Offset intermediate pivot, fire rated........................................ A65 7244F-7245F INT 1 1/2" Offset intermediate pivot, fire rated....................................... A65 7215PT-7226PT-7227PT INT 3/4" Offset power transfer intermediate pivot.........A66 7253 Center hung pivot, 300lb with bottom base mount............................................. A67 7255 Center hung pivot, 500lb with bottom base mount............................................A68 7255J Center hung pivot, 500lb with bottom jamb mount...........................................A69 7256 Center hung pivot, 600lb with bottom base mount............................................. A70 7259 Center hung pivot, 1000lb with bottom base mount.............................................A71 91105F Pocket pivot/hinge, fire rated..................................................................................A72 E91105F Pocket pivot/hinge, power transfer, fire rated..................................................A73 D Latches, catches & bolts E Stops General hinge information......................................................................................................A18 Mounting hardware..................................................................................................................A19 Electrification options............................................................................................................A20 How to order.............................................................................................................................. A21 Clearance requirements......................................................................................................... A22 026XY Full mortise - narrow frame leaf, wide door leaf................................................ A23 027XY Full mortise - wide door leaf.................................................................................... A24 040XY Full mortise - wide throw......................................................................................... A25 041XY Full mortise - swing clear.......................................................................................... A26 045XY Half surface - narrow frame leaf, wide door leaf................................................A27 046XY Half surface - wide door leaf................................................................................... A28 053XY Half surface - narrow frame leaf, narrow door leaf........................................... A29 054XY Half surface - narrow door leaf...............................................................................A30 112HD Full mortise - narrow frame and door leaf.............................................................. A31 112XY Full mortise - narrow frame and door leaf............................................................. A32 114XY Full mortise - narrow frame leaf, door edge protector....................................... A33 157XY Full surface ................................................................................................................... A34 210XY Full surface - swing clear........................................................................................... A35 224HD Full mortise - door edge protector......................................................................... A36 224XY Full mortise - door edge protector..........................................................................A37 General hinge information..................................................................................................... A38 Mounting hardware................................................................................................................. A39 Electrification options............................................................................................................A40 How to order.............................................................................................................................. A41 Clearance requirements......................................................................................................... A42 600 Full mortise pin and barrel continuous hinge - steel.............................................. A43 700 Full mortise pin and barrel continuous hinge - stainless steel............................. A43 700CS Full mortise pin and barrel continuous hinge w/ decorative cover................A44 602 Full surface pin and barrel continuous hinge - steel............................................... A45 702 Full surface pin and barrel continuous hinge - stainless steel.............................. A45 705 Full mortise, full wrap pin and barrel continuous hinge - stainless steel...........A46 611 Swing clear pin and barrel continuous hinge - steel................................................. A47 711 Swing clear pin and barrel continuous hinge - stainless steel................................ A47 711CS Swing clear pin and barrel continuous hinge w/ decorative cover....................A48 715 Full mortise, half wrap pin and barrel continuous hinge - stainless steel...........A49 715CS Full mortise, half wrap pin and barrel continuous hinge w/ decorative cover.................................................................................................A50 B Continuous hinges Aluminum geared hinges Pin and barrel hinges Pulls & plates General hinge information........................................................................................................A2 Electrification options...............................................................................................................A3 How to order:...............................................................................................................................A4 3PB1 3 Knuckle, plain bearing full mortise hinge.................................................................A5 3CB1 3 Knuckle, concealed bearing full mortise hinge...................................................... A6 3CB1HW 3 Knuckle, concealed bearing, heavy weight full mortise hinge.....................A7 3CB1WT 3 Knuckle, concealed bearing, wide throw full mortise hinge......................... A8 3SP1 3 Knuckle, spring full mortise hinge............................................................................. A9 5PB1 5 Knuckle, plain bearing full mortise hinge..............................................................A10 5BB1 5 Knuckle, ball bearing full mortise hinge.................................................................. A11 5BB1HW 5 Knuckle, ball bearing, heavy weight full mortise hinge............................... A12 5BB1WT 5 Knuckle, ball bearing, wide throw full mortise hinge................................... A13 5BB1SC 5 Knuckle, ball bearing, swing clear full mortise hinge..................................... A14 5BB1BSC 5 Knuckle, ball bearing, beveled swing clear full mortise hinge.................. A14 5BB1SCHW 5 Knuckle, ball bearing, swing clear,heavy weight full mortise hinge.... A15 5BB1BSCHW 5 Knuckle, ball bearing, beveled swing clear, heavy weight full mortise hinge..........................................................................................A15 1000 Series Residential hinges..............................................................................................A16 A1 Architectural hinges F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A1 General hinge information Selection of the proper weight and bearing type Considerations to determine hinge size Standard weight.......... Plain bearing Standard weight.......... Ball bearing, concealed bearing Heavy weight................. Ball bearing, concealed bearing Considerations to determine weight and bearing type: Always use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges. Guidelines for hinge metal Interior door or non-corrosive area use: plated or painted steel Interior labeled door use: plated or painted steel, stainless steel Interior door in corrosive area use: stainless steel , brass, bronze Exterior doors use: Stainless steel, brass, bronze Standard pin material are brass hinge – steel pin, Stainless steel hinge – stainless steel pin, steel hinge – steel pin Guidelines for frequency of door usage: Build type Door width Door thickness Weight Clearance Guidelines for hinge height Weight of door Frequency of use Frame Door hardware Daily usage Hinge type High frequency/ Heavy weight door Door thickness Door width In inches In inches Hinge height 1-3/8” Up to 32” 3-1/2 1-3/8 32” to 37” 4” 1-3/4 Up to 36” 4-1/2” 1-3/4 36” to 48” 5” 1-3/4 Over 48” 6” 2” - 2-1/2” Up to 42” 5” heavy weight 2” - 2-1/2” Over 42” 6” heavy weight In inches Clearance requirement* Door thickness Clearance needed Hinge open width 1-3/8 3/4 4 1-3/4 1 4 1-3/4 1-1/2 4-1/2 1-3/4 2 5 1-3/4 3 6 2 1 4-1/2 Large department store entrance 5,000 Heavy weight 2 1-1/2 5 Hospital corridor and surgical doors 5,000 Heavy weight 2 2-1/2 6 Large office building entrance 4,000 Heavy weight 2-1/4 1 5 School entrance 1,250 Heavy weight 2-1/4 2 6 School toilet door 1,250 Heavy weight 2-1/2 3/4 5 Office stairwell 500 Heavy weight 2-1/2 1-3/4 6 Office building toilet door 400 Heavy weight 3 3/4 8 3 2-3/4 8 Medium frequency/ Medium weight door School corridor door 100 Standard weight Hospital consultation rooms 100 Standard weight Office building corridor door 80 Standard weight Store toilet door 60 Standard weight Storage room 50 Standard weight Residential entrance 30 Plain bearing Interior residential 20 Plain bearing Low frequency /Light door ANSI/BHMA Grade/minimum cycle requirements Grade 1: 2,500,000 Heavy Weight Ball & Concealed Bearing Grade 2: 1,500,000 Standard Weight Ball & Concealed Bearing Grade 3: 350,000 Light Weight Plain Bearing *Distance needed between wall and door at 180° to allow for any projections from wall; trim, decorative molding, etc. Consult factory technical service for engineered special applications Guidelines for number of hinges Doors under 7'6"............ 3 hinges Doors over 7'6"............... 4 hinges Location of hinges Top hinge 5" from jamb rabbet to top of barrel 5" (127mm) Equal Bottom hinge 10" from bottom edge of barrel to finished floor Third hinge centered between top and bottom hinges G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A2 Hinges & pivots Architectural hinges 10" (254mm) A2 Ives Architectural hardware products Note: Consult door manufacturer for other hinge locations Architectural hinges C UL634 Listed Not available 3PB1, 3SP1, and 5PB1 models Not available on 3.5 x 3.5 and 4X4 size hinges Not available with security stud (SH) option Packaged one hinge per box with standard wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Special wire gauge, number, and color configurations available, contact factory Flush bolts & coordinators D Latches, catches & bolts UL634 Listed Not available 3PB1, 3SP1, and 5PB1 models Not available on 3.5 x 3.5 size hinges Not available with security stud (SH) option Packaged one hinge per box with standard wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Special wire gauge, number, and color configurations available, contact factory B Provides door position monitoring. Monitor is rated 30 volts AC/DC at 0.5 amp. Fully compatible with through-wire hinges with 4 wire(TW4M) and 8 wire (TW8M) installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Pulls & plates Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Throughwire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire(TW4) and 8 wire (TW8) installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Electrical Monitor (MON, TW4M,TW8M) A3 Electrical through-wire (TW4 and TW8) Hinges & pivots General information - electrification options E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A3 Architectural hinges F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A4 Hinges & pivots Ives Hinge number system Please note: For availability of specific models, please refer to the item’s catalog page or consult Customer Service. How to order: 5 - Function: PB BB CB SP Plain bearing Ball bearing Concealed bearing Spring Hinge Type: 1 2 3 4 Full mortise Half mortise Full surface Half surface G - 1 Weight / Type: Blank Standard weight(BHMA Grade 2) HW Heavy weight(BHMA Grade 1) SC Swing clear BSC Beveled swing clear SCHW Swing clear, heavy weight BSCHW Beveled swing clear, heavy weight WT Wide throw Options: HT Hospital tip SH Security stud (includes NRP as a standard offering) Height 3.5 4 4.5 5 x x x x x Width 3.5 4 4, 4.5, 5, 6 4.5, 5, 6, 7 Consult model page for availability. Finish BHMA 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Description Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Substrate Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel For other colors, consult factory. Miscellaneous hardware BB Number of knuckles: 3 3 Knuckle 5 5 Knuckle Options 2 NRP RC-1/4 RC-5/8 SEC TW4 TW8 MON TW4M TW8M CON A4 Non-removable pin Rounded corners 1/4" Rounded corners 5/8" Security screws (hollow metal - hex head pin in socket) Thru-wire - four wire Thru-wire - eight wire Monitor Thru-wire - four wire with monitor Thru-wire - eight wire with monitor Allegion connect for wire options above Ives Architectural hardware products Finish USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 - HW - SH - 4.5x4.5 - 652 - NRP Architectural hinges Recommended for standard weight doors Recommended for low frequency usage Not recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Material substrate Made from brass, 1040 steel, or 304 series stainless steel Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 Gauge 0.123 0.130 0.134 0.134 0.146 C Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 Flush bolts & coordinators Dimensions B Options NRP. . . . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . . . Rounded corners SEC . . . . . . . . . . . . . . . . Security fasteners pin-in-socket Pulls & plates Certifications Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions A5 Hinges & pivots 3PB1 3 Knuckle, plain bearing full mortise hinge Refer to General Hinge Information page to determine proper hinge for application 3PB1 Finishes F For other colors, consult factory. Exterior hardware USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 E Finish Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Stops Substrate Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze D Description 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Latches, catches & bolts BHMA G Miscellaneous hardware Ives Architectural hardware products A5 Architectural hinges Hinges & pivots 3CB1 3 Knuckle, concealed bearing full mortise hinge B Pulls & plates A6 Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire W8M. . . . . . . . . . . . . Eight wire with monitor MON.. . . . . . . . . . . . . Monitor (not available on 3.5X3.5) Flush bolts & coordinators Material substrate C Made from brass, 1040 steel, or 304 series stainless steel Dimensions Latches, catches & bolts Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.123 0.130 0.134 0.134 0.146 0.146 D Refer to General Hinge Information page to determine proper hinge for application Miscellaneous hardware F Exterior hardware E Stops 3CB1 Finishes BHMA Description Substrate Finish 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G For other colors, consult factory. A6 Ives Architectural hardware products Architectural hinges Material substrate Height x Width 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 C Dimensions Flush bolts & coordinators Made from brass, 1040 steel, or 304 series stainless steel B Options NRP. . . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . . Rounded corners SEC . . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4.. . . . . . . . . . . . . . Four wire TW4M.. . . . . . . . . . . . Four wire with monitor TW8.. . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . . Eight wire with monitor MON.. . . . . . . . . . . . . . Monitor Pulls & plates Certifications Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors A7 Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with two heavy duty concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Hinges & pivots 3CB1HW 3 Knuckle, concealed bearing, heavy weight full mortise hinge Size (mm) 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.180 0.180 0.190 0.190 3CB1HW Finishes Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 F 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Exterior hardware Finish E Substrate Stops Description D BHMA Latches, catches & bolts Refer to General Hinge Information page to determine proper hinge for application For other colors, consult factory. G Miscellaneous hardware Ives Architectural hardware products A7 Architectural hinges Hinges & pivots 3CB1WT 3 Knuckle, concealed bearing, wide throw full mortise hinge B Pulls & plates A8 Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor MON. . . . . . . . . . . . . Monitor Material substrate Flush bolts & coordinators 1040 steel C Dimensions Height x Width 4.5 x 5 4.5 x 6 5x6 5x7 5x8 Size (mm) 114 x 127 114 x 152 127 x 152 127 x 178 127 x 203 Gauge 0.134 0.134 0.146 0.146 0.146 Latches, catches & bolts Refer to General Hinge Information page to determine proper hinge for application E Stops D 3CB1WT Finishes BHMA Description Substrate Finish 600 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A8 Ives Architectural hardware products Architectural hinges B Material substrate Made from 1040 steel or 304 series stainless steel Pulls & plates Certifications Certified to ANSI/BHMA A156.4 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL listed for use with fire rated doors A9 For use with doors where self-closing is required Maximum door weight 120 lbs, max door width 36" Maximum labeled door size - 3'0" wide x 7'0" x 1 3/4" thick as set in NFPA #80 Packed with fasteners for hollow metal and half metal / half wood applications 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Pin for setting spring tension Adjusting wrench Hinges & pivots 3SP1 3 Knuckle, spring full mortise hinge Options RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket Dimensions Size (mm) 102 x 102 114 x 102 114 x 114 Gauge 0.130 0.134 0.134 3SP1 Finishes Substrate Finish Primer paint Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 D Description 600 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Latches, catches & bolts BHMA C Refer to General Hinge Information page to determine proper hinge for application. Flush bolts & coordinators Height x Width 4x4 4.5 x 4 4.5 x 4.5 For other colors, consult factory. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A9 Architectural hinges Hinges & pivots 5PB1 5 Knuckle, plain bearing full mortise hinge B Pulls & plates A10 Recommended for standard weight doors Recommended for low frequency usage Not recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners - pin-insocket Material substrate Made from brass, 1040 steel, or 304 series stainless steel Flush bolts & coordinators Dimensions C Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 Gauge 0.123 0.130 0.134 0.134 0.146 Refer to General Hinge Information page to determine proper hinge for application F Exterior hardware E Stops D Latches, catches & bolts 5PB1 Finishes BHMA Description Substrate Finish 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware For other colors, consult factory. A10 Ives Architectural hardware products Architectural hinges Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.123 0.130 0.134 0.134 0.146 0.146 Refer to General Hinge Information page to determine proper hinge for application D Latches, catches & bolts Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 C Dimensions Flush bolts & coordinators Material substrate Made from brass, 1040 steel, or 304 series stainless steel B Options NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor MON. . . . . . . . . . . . . Monitor (not available on 3.5X3.5) Pulls & plates Certifications Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors A11 Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Hinges & pivots 5BB1 5 Knuckle, ball bearing full mortise hinge 5BB1 Finishes For other colors, consult factory. G Miscellaneous hardware USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 F Finish Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Exterior hardware Substrate Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze E Description 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Stops BHMA Ives Architectural hardware products A11 Architectural hinges Hinges & pivots 5BB1HW 5 Knuckle, ball bearing, heavy weight full mortise hinge B Pulls & plates A12 Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with four ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor MON. . . . . . . . . . . . . Monitor Material substrate Flush bolts & coordinators Made from brass, 1040 steel, or 304 series stainless steel C Dimensions Height x Width 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 Size (mm) 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.180 0.180 0.190 0.190 Latches, catches & bolts Refer to General Hinge Information page to determine proper hinge for application F Exterior hardware E Stops D 5BB1HW Finishes BHMA Description Substrate Finish 600 605 606 610 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware For other colors, consult factory. A12 Ives Architectural hardware products Architectural hinges Material substrate 1040 steel Size (mm) 114 x 127 114 x 152 127 x 152 127 x 178 127 x 203 C Height x Width 4.5 x 5 4.5 x 6 5x6 5x7 5x8 Flush bolts & coordinators Dimensions B Options NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor MON.. . . . . . . . . . . . . Monitor Pulls & plates Certifications Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions A13 Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Hinges & pivots 5BB1WT 5 Knuckle, ball bearing, wide throw full mortise hinge Gauge 0.134 0.134 0.146 0.146 0.146 5BB1WT Finishes Finish Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 E Substrate Primer paint Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Stops Description 600 631 632 633 639 640 641 643 646 651 652 643e/716 D BHMA Latches, catches & bolts Refer to General Hinge Information page to determine proper hinge for application For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A13 Architectural hinges Meets ANSI/BHMA A156.1 A8122 – Steel A5122 – Stainless Steel A2122 – Brass Designed to completely clear the opening when door is opened 92°. Recommended for use in ADA door opening applications 5BB1SC made for square edge doors 5BB1BSC made for beveled edge doors Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions Material substrate Flush bolts & coordinators B Pulls & plates A14 Hinges & pivots 5BB1SC 5 Knuckle, ball bearing, swing clear full mortise hinge 5BB1BSC 5 Knuckle, ball bearing, beveled swing clear full mortise hinge C Made from 1040 steel or 304 series stainless steel Dimensions Height 4.5 5 Size (mm) 114 127 NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor MON. . . . . . . . . . . . . Monitor Gauge 0.134 0.146 Latches, catches & bolts Refer to General Hinge Information page to determine proper hinge for application E Stops D 5BB1SC Finishes BHMA Description Substrate Finish 600 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A14 Ives Architectural hardware products Architectural hinges Options Height 4.5 5 Size (mm) 114 127 Gauge 0.180 0.190 5BB1SCHW Finishes Finish 600 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 E Substrate Stops Description D BHMA Latches, catches & bolts Refer to General Hinge Information page to determine proper hinge for application C Dimensions NRP.. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor MON. . . . . . . . . . . . . Monitor Flush bolts & coordinators Material substrate Made from 1040 steel or 304 series stainless steel B Certifications Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions Pulls & plates Designed to completely clear the opening when door is opened 92°. Recommended for use in ADA door opening applications 5BB1SCHW made for square edge doors 5BB1BSCHW made for beveled edge doors Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with four ball bearing assemblies Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS A15 Hinges & pivots 5BB1SCHW 5 Knuckle, ball bearing, swing clear,heavy weight full mortise hinge 5BB1BSCHW 5 Knuckle, ball bearing, beveled swing clear, heavy weight full mortise hinge For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A15 Architectural hinges A16 Hinges & pivots 1000 Series Residential hinges Pulls & plates 1010 1011 Material substrate B C Flush bolts & coordinators 3.5 x 3.5 or 4 x 4 plain bearing hinges Button non-rising pins and caps Recommended for doors weighing less than 70 lbs and not exceeding 3'0" x 7'0" Recommended for low frequency, residential applications Not recommended for use with a door closer For metal door applications see 3PB1 and 5PB1 models Available with rounded (1/4" or 5/8") or square corners Packed with fasteners for wood doors #9 x 1 FPHWS Made from 1040 steel Dimensions Model 1010 1011 1012 1020 1021 1012 1020 Height x Width (in) 3.5 x 3.5 3.5 x 3.5 3.5 x 3.5 4x4 4x4 Corner Square 5/8" Radius 1/4" Radius Square 5/8" Radius 5BB1HW Finishes BHMA Description Substrate Finish 631 632* 646 651 652 643e/716 Matte black Bright brass Satin nickel Bright chrome Satin chrome Aged bronze Steel Steel Steel Steel Steel Steel F-622E F-605E F-619E F-625E F-626E F-716E * Only available on 1011 model. For other colors, consult factory. D Latches, catches & bolts G Miscellaneous hardware F Exterior hardware E Stops 1021 A16 Ives Architectural hardware products Continuous hinges The design of a continuous hinge eliminates the gap between the door and the frame. The absence of gap also helps prevents finger from being pinched, making it a safer device than traditional hinges. These benefits result in higher efficiency and less maintenance, maximizing the value of your opening investment. A17 Not only does this reduce hinge failure, it also keeps your door in constant alignment, greatly reducing the chance of door sag. These characteristics make continuous hinges suitable for high use/high traffic doors. Hinges & pivots Ives Continuous Hinges are designed to last the life of the building. The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of door and frame on butt hinge applications. Continuous hinges are available in two styles; aluminum geared and pin and barrel in steel or stainless steel. B Pulls & plates Aluminum geared I ve s 5 0 0 ,Ives 6 0provides 0 , 7 0 0two unique series of bearing designs. The HD model features a spread bearing design for lighter weight doors. The XY features a center load bearing design to help reduce frame issues and also has an available hospital tip cap and electric through wire panel with a continuous cover. 3/8” 1/8” GA 0.075” Hi n ge T h i ck n es s 2-1/4 ” 1-3/8” Latches, catches & bolts I ve s1-3/64” 1 1 , 7 1 1 GA 0.075” Hi n ge T h i ck n es s 3/8” 1/16” 1-9/16” D 1/4” C 1/2” Flush bolts & coordinators Geared continuous hinges utilize a single gear section for the leaf and a separate gear section for the frame side of the door. The two are held in place together by a full length cover channel and rotate on a series of bearings. 1/4 ” 1-3/4” Pin and barrel 5/32” E Stops Pin and Barrel hinges share many of the same characteristics of a traditional hinge. Both have a center pin and rolled knuckles. However, a continuous Pin and Barrel hinge stretches along the entire length of the frame. IVES offers both stainless steel and primed steel to best match your specific application. 3/4” Ives also offers the CS series pin and barrel hinges which provides a patented solution that brings the clean aesthetic design of aluminum geared continuous hinge to the ruggedness and safety afforded by stainless pin and barrel continuous hinges. [12.7] 1/2" [12.7] 3/4" [19.1] [1.3] [1.6] 1 1/16" 3/4" [19.1] 1/16" GA. 0.050" G DOOR Miscellaneous hardware FRAME [44.5] 1/8" [9.5] 1/2" 3/8" [9.5] 5/8" [15.9] [55.5] 2 3/16" 2" [50.8] 7/32" [5.6] HINGE ALLOWANCE F GA 0.075" HINGE THICKNESS GA. 0.060" [1.5] Exterior hardware HINGE Lifetime warranty Ives continuous hinges carry a limited lifetime warranty, ensuring your opening will function to your satisfaction every time. Please refer to the price book for more detailed warranty information. Ives Architectural hardware products A17 A18 Hinges & pivots Aluminum geared hinges General hinge information ANSI Certified All Ives Aluminum geared hinges are certified to ANSI 156.26, Grade 1 XY Models. . . . . . . . . . Grade 1 150lb and 300lb door test HD Models . . . . . . . . . Grade 1 150lb door test B Pulls & plates UL Listed All Ives Aluminum geared hinges are tested and approved UL 10C (90 minutes). Material Hinge duty XY Model - Bearings HD Model E Stops F Exterior hardware US Description 628 710 US28 313AN Clear aluminum anodized Dark bronze anodized Base Material Aluminum Aluminum Custom finishes available, consult factory. Field modifications Ives Aluminum geared continuous hinges can be cut to length from both ends during installation. The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fastners regardless of the original length of the hinge. Requires the hinge to be cut from both ends. Example: A 119" hinge can have 25" removed from each end to make it a 69" long hinge. HD Models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. Door weight For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 450 lbs a 16 gauge channel in the frame is required. For doors up to 600 lb, rivet nuts are required in the frame in addition to the frame reinforcement. Max door width of 4'0". Hospital tips Hospital tip (HT) for XY models D Latches, catches & bolts C Flush bolts & coordinators All Ives Aluminum geared hinges are heavy duty(XY and HD models) XY Models: Rounded gear design for extended life and smoother operation. Patented, center loaded, interlocking bearing design which helps handle the opening and closing of the door better over time. All sizes have 37 Bearings. XY Mounting Slot Adjustability on all full and half surface models to help with installation. Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps. Improved aesthetics with a curved, articulating cover design which eliminates pinch points HD Models Features transmission gear design with bearings that are evenly spaced every 3" on center - Amount of bearings varies by size - 83". . . . . . . 32 Bearings - 85". . . . . . . 32 Bearings - 95". . . . . . . 36 Bearings - 120". . . . . . 47 Bearings Standard lengths 83", 85", 95", 119"(XY Models), 120"(HD Models) Custom lengths available up to 119", consult factory. Handing required for 224HD G Miscellaneous hardware BHMA XY Models 6063-T6 Aluminum XY Model Slot Adjustability Finishes A18 Ives Architectural hardware products The new XY models features a new ligature resistant and tamper resistant Hospital Tip Cap. The new design provides a single uniform 45° angle surface with no exposed edges or openings. Hospital tips (HT) for HD models The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface. Recommended for HT retrofit applications only. Aluminum geared hinges A19 Hinges & pivots Mounting hardware Standard hardware Full mortise hinges 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Half surface hinges Includes 210XY 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 12-24 x 3/4" Steel self drilling / self tapping hex head screw Full surface hinges 157XY Only 12-24 x 3/4" Steel self drilling / self tapping hex head screw B Full mortise hinges Pulls & plates Security screws - Hollow metal door and frame (SEC/HM) 12-24 X 1/2" Stainless steel socket security screw 112HD and 224HD only Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) Security screws - 1/2 wood, 1/2 hollow metal (SEC/WD/HM) 12-24 X 1/2" Stainless steel socket security screw 12 X 1 1/4" Stainless steel socket security wood screw Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) C 1/2 Self drill, self tap / 1/2 wood (TEK/WD) Full mortise hinges 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 12 x 1 1/4" Phillips head wood screw Half surface hinges 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 1/4 x 1 1/2" Hex head lag screw Full surface hinges 12-24 x 3/4" Steel self drilling / self tapping hex head screw 1/4 x 1 1/2" Hex head lag screw Latches, catches & bolts Wood door and frame (WD) 12 x 1 1/4" Phillips head wood screw Half surface hinges Includes 210XY 12 x 1 1/4" Phillips head wood screw 1/4 x 1 1/2" Hex head lag screw Full surface hinges 157XY only 1/4 x 1 1/2" Hex head lag screw D Full mortise hinges Flush bolts & coordinators Full Mortise Hinges 112HD and 224HD only Thread forming (TF) Full mortise hinges 12-24 x 3/4" Steel thread forming phillips head screw E Stops 112HD and 224HD only Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A19 General information - electrification options Electric power transfer (EPT) availabile on HD and XY models *NEW* Electrical through-wire panel with Allegion Connect (TWP CON) (XY models only) Electric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives Continuous Hinges provide standard cut outs to fit Von Duprin EPT-2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Door handing is required. The most secure and best solution for powering your door. The redesigned XY Through-Wire Panel is heavy duty and easy-toinstall. Hinge consists of single piece cover design for improved aesthetics and three sections with a standard bottom length and through wire panel location. The panel can quickly slip in and out of the the hinge for maintenance and replacement. Unlike all of the other manufacturer solutions, the XY throughwire panel maintains a one piece appearance on the cover side of the hinge. The new wire design features a teflon coated wire which greatly improves performance and durability. The new panel also comes standard with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Warrantied for up to 5 years. Door handing is required. Flush bolts & coordinators B Pulls & plates A20 Hinges & pivots Aluminum geared hinges EPT 112HD TWP XY Series D Latches, catches & bolts C Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylidrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Electrical cutouts Ives aluminum continuous hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. When ordering indicate the following: E Stops 1. Opening size. 2. Handing. LH, RH, LHR or RHR. 3. Manufacturer and model number of the electrical product being used. Example; Von Duprin ETPT2 Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. In accordance with industry standards, all cutouts are made from top edge of door to center line of cut-out F Exterior hardware Below are standard locations for Von Duprin EPT2 or EPT10, and monitor switch. Miscellaneous hardware Note: See ordering guide in price book for proper placement. G Standard Length HD XY XY EPT EPT TWP CON 83" 30" 30" 43.5" 85" 32" 32" 45.5" 95" 42" 42" 55.5" 119" (XY) – 66" 79.5" 120" (HD) 67" – – XY TWP CON is located 39.5 inches from bottom of the hinge. Consult factory for TWP locations on custom length hinges. A20 Ives Architectural hardware products Aluminum geared hinges HT US28 83 TWP CON A21 112XY Hinges & pivots How to order Model Full mortise - swing clear 045XY Half surface - narrow frame leaf, wide door leaf 046XY Half surface - wide door leaf 053XY Half surface - narrow frame leaf, narrow door leaf 054XY Half surface - narrow door leaf 112XY Full mortise - narrow frame and door leaf 112HD Full mortise - narrow frame and door leaf 114XY Full mortise - narrow frame leaf, door edge protector 157XY Full surface - center pivot 210XY Full surface - swing clear 224XY Full mortise - door edge protector 224HD Full mortise - door edge protector C Full mortise - wide throw 041XY Flush bolts & coordinators Full mortise - wide door leaf 040XY B Full mortise - narrow frame leaf, wide door leaf 027XY Pulls & plates 026XY Option 1 Latches, catches & bolts HT Hospital tip (XY models only) (Only available on 026XY, 027XY, 040XY, 112XY, 114XY, 224XY ) D Finish US28 313AN 315AN Clear Anodized Aluminum Dark Bronze Anodized Aluminum Black Anodized Aluminum (XY only) Custom finishes available, consult factory. Length E Stops 83" 85" 95" 119"(XY) / 120"(HD) Custom lengths available up to 119", consult factory. When specifying length, handing required. Option 2 EPT G Miscellaneous hardware TFWD F SECHM SECWDHM SECWDWD WD TEKWD TF Exterior hardware TWP CON Electric power transfer prep (Only available on 026XY, 027XY, 112HD, 112XY, 114XY, 224HD, 224XY ) Handing (LH and RH) Required for 026, 027, 114, and 224 models Through Wire Panel with Allegion Connect Standard (Only Available on 026XY, 027XY, 112XY, 114XY, 224XY ) Security fasteners - pin-in-socket Security fasteners - pin-in-socket (half wood, half hollow metal) Security fasteners - pin-in-socket (wood door and frame) Wood door fasteners Half thread forming, half wood Thread forming screws (pilot hole required) (Only available with 112HD and 224HD) Half thread forming, half wood Ives Architectural hardware products A21 A22 Hinges & pivots Aluminum geared hinges Clearance requirements Consult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. Hinge Side Clearance Hinge Side Clearance Hinge Side Clearance 3/16” E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates 1/8” 1/32” Frame Irregularity 1/16” Frame Irregularity Single door Door under-sizing Model Hinge-side clearance Lock-side clearance Frame irregularity Beveled door clearance Square edged Beveled edge 026XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 027XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 040XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 041XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 045XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 046XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 053XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 054XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 112HD 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 112XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 114XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 157XY 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 210XY 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 224HD 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 224XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" Model Hinge-side clearance (2 doors) Lock-side clearance Frame irregularity (2 doors) Beveled door clearance (2 doors) Square edge total Square edge each door Beveled edge total Beveled edge each door 026XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 027XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 040XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 041XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 045XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 046XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 053XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 054XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 112HD 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 112XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 114XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 157XY 1/8" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 210XY 1/8" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 224HD 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 224XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" Pair of doors G Miscellaneous hardware F Exterior hardware Door under-sizing Templates and installation instructions available on line at www.allegion.com/us A22 Ives Architectural hardware products Aluminum geared hinges B Certifications Pulls & plates Wide door leaf for 2" and 2 1/4" doors Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non handed for custom cut lengths 3/32" door inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps. For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials A23 Hinges & pivots 026XY Full mortise - narrow frame leaf, wide door leaf Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. C 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators Standard lengths 83", 85", 95", 119" Options D Optional mounting hardware: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through wire panel with Allegion Connect TEKWD . . . . . . . . . . 1/2 Self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 11/16" 2 3/4" F Exterior hardware 1 7/8" 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A23 Aluminum geared hinges Hinges & pivots 027XY Full mortise - wide door leaf Wide door leaf for 2" and 2 1/4" doors Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Pulls & plates A24 Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware C 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through wire panel with allegion connect D Optional mounting hardware: SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: E Stops For pairs of doors see chart and general information 2 11/16" F Exterior hardware 1 7/8" G Miscellaneous hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A24 Ives Architectural hardware products 2 3/4" Aluminum geared hinges B Certifications Pulls & plates Wide throw for 1 3/4" doors Patented center loaded, interlocking bearing design Non handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials A25 Hinges & pivots 040XY Full mortise - wide throw Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths 83", 85", 95", 119" Custom anodizing and painting are available, consult factory. Options: HT. . . . . . . . . . . . . . . . Hospital tip For single door applications: For pairs of doors see chart and general information Stops 1 19/32" E 1 1/8" D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts Optional mounting hardware: C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Flush bolts & coordinators Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 3 1/4" 1 11/16" F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A25 Aluminum geared hinges Hinges & pivots 041XY Full mortise - swing clear Pulls & plates A26 Swing clear for 1 3/4" doors Installs easily on doors with 90° opening Door edge protector Patented center loaded, interlocking bearing design Non handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Optional mounting hardware: D Latches, catches & bolts SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 31/32" 1 7/8" 1 25/32" Exterior hardware 2 5/32" req’d for rotation G Miscellaneous hardware F 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A26 Ives Architectural hardware products Aluminum geared hinges B Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Pulls & plates Half surface for retrofit or new construction Frame leaf depth 1-9/16" Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non handed for custom cut lengths 9/32" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials A27 Hinges & pivots 045XY Half surface - narrow frame leaf, wide door leaf Standard lengths Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators 83", 85", 95", 119" Optional mounting hardware: For single door applications: For pairs of doors see chart and general information D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts 3" 2" E Stops 2 13/32" 1 9/16" F Exterior hardware 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A27 Aluminum geared hinges Hinges & pivots 046XY Half surface - wide door leaf Half surface for retrofit or new construction Frame leaf depth 1-7/8" Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non Handed for custom cut lengths 9/32" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Pulls & plates A28 Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Flush bolts & coordinators Latches, catches & bolts Standard lengths 83", 85", 95", 119" Standard mounting hardware C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. D Optional mounting hardware: SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information 3" E Stops 2 11/16" 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door G Miscellaneous hardware F Exterior hardware 1 7/8" A28 Ives Architectural hardware products 2" Aluminum geared hinges B Certifications Pulls & plates Half surface for retrofit or new construction Frame leaf depth 1-9/16" Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non handed for custom cut lengths 1/8" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials A29 Hinges & pivots 053XY Half surface - narrow frame leaf, narrow door leaf Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN) Custom Anodizing and Painting are available, consult factory Custom anodizing and painting are available, consult factory. D Optional mounting hardware: Latches, catches & bolts Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators Standard lengths 83", 85", 95", 119" SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 1/32" 2 13/32" 1" Exterior hardware 1 9/16" F 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A29 Aluminum geared hinges Hinges & pivots 054XY Half surface - narrow door leaf Half surface for retrofit or new construction Frame leaf depth 1-7/8" Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non Handed for custom cut lengths 1/8" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Pulls & plates A30 Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Flush bolts & coordinators Standard lengths 83", 85", 95", 119" Standard mounting hardware C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Latches, catches & bolts Optional mounting hardware: D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information Stops 2 1/32" 1" E 2 11/16" Exterior hardware 1 7/8" G Miscellaneous hardware F 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door A30 Ives Architectural hardware products Aluminum geared hinges For 1 3/4" doors Spread bearing design Non Handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing A31 Hinges & pivots 112HD Full mortise - narrow frame and door leaf Certifications B Pulls & plates Meets ANSI 156.26 for 150lbs UL10C certified Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Custom anodizing and painting are available, consult factory. C Options: EPT . . . . . . . . . . . . . . Electric power transfer Optional mounting hardware: For single door applications: For pairs of doors see chart and general information D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TF. . . . . . . . . . . . . . . . Thread forming screws TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts Flush bolts & coordinators Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN) 2 9/32" E Stops 1 9/16" Bevel Edge F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A31 Aluminum geared hinges Hinges & pivots 112XY Full mortise - narrow frame and door leaf For 1 3/4" doors Patented center loaded, interlocking bearing design Non Handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Pulls & plates A32 B Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through wire panel with Allegion Connect Optional mounting hardware: D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: Stops For pairs of doors see chart and general information E 2 5/16" Exterior hardware 1 9/16" Bevel Edge G Miscellaneous hardware F 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A32 Ives Architectural hardware products Aluminum geared hinges B Certifications Pulls & plates For 1 3/4" doors Door edge protector Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non Handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials A33 Hinges & pivots 114XY Full mortise - narrow frame leaf, door edge protector Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. C 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators Standard lengths 83", 85", 95", 119" Options: D Optional mounting hardware: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through wire panel with Allegion Connect SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 5/16" 1 9/16" 2 9/16" F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A33 Aluminum geared hinges Hinges & pivots 157XY Full surface A34 B Pulls & plates A patented easy-to-install, heavy duty, full surface continuous hinge Narrow Frame Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers Non Handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 550 lbs For lead-lined application consult factory for engineering specials Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Flush bolts & coordinators Standard lengths 83", 95", 119" Standard mounting hardware C 12-24 x 1/2" Steel self drilling / self tapping hex head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Latches, catches & bolts Options: D HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through wire panel with Allegion Connect Optional mounting hardware: TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information Stops 3 3/16" Exterior hardware E 7/8" G Miscellaneous hardware F 1 5/8" 1/16" Clearance for Square Edge Door 3/32" Clearance for Beveled Edge Door A34 Ives Architectural hardware products 1" 1 1/4" Aluminum geared hinges B Pulls & plates Certifications A35 Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers Non handed for custom cut lengths 1/32" door inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 550 pounds For lead-lined application consult factory for engineering specials Hinges & pivots 210XY Full surface - swing clear Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths 83", 85", 95", 119" C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Optional mounting hardware: For single door applications: For pairs of doors see chart and general information D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts Flush bolts & coordinators Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 3 9/16" 1 15/16" E Stops 1 5/16" F Exterior hardware 1/16" Clearance for Square Edge Door 3/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A35 Aluminum geared hinges Hinges & pivots 224HD Full mortise - door edge protector A36 For 1 3/4" doors Door edge protector Spread bearing design Non handed for custom cut lengths 1/16" Door Inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing Pulls & plates Certifications B Meets ANSI 156.26 for 150lbs UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN) C Custom anodizing and painting are available, consult factory. Options: EPT . . . . . . . . . . . . . . Electric power transfer Optional mounting hardware: D Latches, catches & bolts SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TF. . . . . . . . . . . . . . . . Thread forming screws TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: E Stops For pairs of doors see chart and general information Exterior hardware 2 5/8" 1 15/16" G Miscellaneous hardware F 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A36 Ives Architectural hardware products 2 19/32" Aluminum geared hinges B Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Pulls & plates For 1 3/4" doors Door edge protector Patented center loaded, interlocking bearing design Non Handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials A37 Hinges & pivots 224XY Full mortise - door edge protector Standard lengths Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame D Optional mounting hardware: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through wire panel with Allegion Connect Flush bolts & coordinators 83", 85", 95", 119" For single door applications: For pairs of doors see chart and general information E Stops 2 11/16" 2 9/16" 1 7/8" F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A37 General hinge information Certifications Finishes 600 and 700 Series meets ANSI 156.26, Grade 1 HD Models, Grade 1, 150lb door test CS Series models certified ANSI 156.26, Grade 1, 150lb door test BHMA Substrate Finish 600 Series 600 Grey primer paint Steel USP UL Listed 700, 702, 705, 711, 715 Series 630 Satin stainless steel Stainless steel US32D 700CS, 705CS, 711CS Series 441 Satin stainless anodized 600 Grey primer paint 628 Clear aluminum anodized 688 Satin brass anodized 709 Satin bronze anodized 710 Dark bronze anodized 711 Black anodized 712 Bright chrome anodized 713 Satin chrome anodized Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN All Ives pin and barrel hinges are tested and approved UL 10C (3 hr). Material 600 Series 1012 Series, 14 Gauge cold-rolled steel 700, 702, 705, 711, 715 Series 304 Series, 14 Gauge stainless steel CS Series 304 Series, 14 Gauge stainless steel body and 6063-T6 aluminum cover Barrel Type Standard series The standard series pin and barrel continuous hinges features twin self lubricated nylon bearings with a stainless steel pin. Description Custom finishes available, consult factory. Field modifications CS Series The CS Series is a heavy duty, easy-to-install, stainless steel pin and barrel continuous hinge that can be used for fire applications and is highly suitable for after-market or new construction situations. The patented covers hide the unsightly pin and barrel of the standard pin and barrel hinges, giving the CS Series continuous hinge a stylish appearance to accompany heavy duty performance. Ives pin and barrel continuous hinges can be cut to length during installation. The CS Series includes medical grade, patented nylon winged bearings. They also include the XY adjustability feature which allows for better door alignment during installation. CS Models The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fasteners regardless of the original length of the hinge. Standard lengths 83", 85", 95", 120" Custom lengths available up to 120", consult factory. Handing required for 702, 705, 711, 715. Standard models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. Example: A 119" hinge can have 25" removed from each end to make it a 69" long hinge. Door weight For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 300 lbs, a 16 gauge channel in the frame is required. For doors up to 600 lb (max door width of 4'0"), rivet nuts are required in the frame in addition to the frame reinforcement. G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A38 Hinges & pivots Pin and barrel hinges Hospital tips (HT) for standard models. The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface. A38 Ives Architectural hardware products Pin and barrel hinges A39 Hinges & pivots Mounting hardware Standard Hardware 600/602/611/700/702/705/711/715 10 x 1/2" Stainless self drilling / self tapping phillips head screw 10 x 1" Stainless phillips head wood screw ( 1/2 pkg for door or frame) 700CS/711CS/715CS 12-24 x 3/4" Stainless self drilling / self tapping phillips head screw Security screws - hollow metal door and frame (SECHM) 12-24 x 1/2" Stainless security head machine screw B 10 X 1/2" Stainless steel Torx security screw 700CS/711CS/715CS Pulls & plates 600/700/602/702/705/611/711/715 Security screws - 1/2 wood, 1/2 hollow metal (SECWDHM) 600/700/602/702/705/611/711/715 10 X 1/2" Stainless steel Torx security screw 10 x 1" Stainless Torx security wood screw Security screws - 1/2 wood, 1/2 hollow metal (SECWDWD) 10 x 1" Stainless Torx security wood screw Flush bolts & coordinators 600/700/602/702/705/611/711/715 Wood door and frame (WD) 10 x 1" Stainless phillips head wood screw 700CS/711CS/715CS #12 x 1 1/4" Stainless sheet metal screw C 600/602/611/700/702/705/711/715 D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A39 General information - electrification options Only available for the full mortise hinges Electric power transfer (EPT) availabile on 600, 700, 705, 715, 700CS, 715CS models Electrical through-wire panel with Allegion Connect (TWP) (700CS models only) Electric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives Pin and Barrel Hinges provide standard cut outs to fit Von Duprin EPT- 2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Door handing is required. The thru-wire panel solution works in the CS mortise hinge to maintain the clean aesthetic design of aluminum geared continuous hinges. Made with the same medical grade bearings of Ives other pin and barrel hinges, the CS Series brings thruwire panel innovation to your continuous hinge application while keeping its great looks. Electrical through-wire (TW8) for standard models (600, 700, 705, 715) only The CS Series thru-wire panel is a heavy duty, easy-to-install, stainless steel panel. Tested to 2.5 million cycles, the CS Series panel can quickly slip in and out of the hinge for maintenance and replacement. Recommended for low frequency usage. Provides electric power transfer from the frame to the door cable in order to supply power to an electrified mortise or cylidrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Requires the door to be torn down for maintenance. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. 600/700 TW 600/700 TW TW8 600/700s 600/700 600/700 EPT 600/700/ 700CS Unlike all of the other manufacturer solutions the CS Series thru-wire panel maintains a one piece appearance on the cover side of the hinge. It installs with the same 5/16" clearance as aluminum geared hinges and works in all of the decorative cover finishes. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Thru-wire panel is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Top of door Top of door Top of door Top of door E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A40 Hinges & pivots Pin and barrel hinges “C L EPT” “C L EPT” “C L TW” “C L TW” Electrical Cutouts Exterior hardware Ives Pin & Barrel Continuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. When ordering indicate the following: F 1. Opening size. 2. Handing. LH, RH, LHR or RHR. 3. Manufacturer and model number of the electrical product being used. Example; Von Duprin ETPT2 G Miscellaneous hardware Note: See ordering guide in price book for proper placement. CL = Center line CL = Center line Standard Length 83" EPT TW TWP 30" 43-19/32" 43-13/16" 85" 32" 45-17/32" 44-29/32" 95" 42" 55-17/32" 55-9/32" 120" 67" 80-17/32" 79-1/2" A40 Ives Architectural hardware products Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. For your general information following are standard locations for Von Duprin EPT2 or EPT10, and TW (through wire). In accordance with industry standards, all cutouts are made from Top Edge of Door to Center Line of Cut-out. Pin and barrel hinges HT US32D 83 TW8 CON A41 700 Hinges & pivots How to order Model Stainless steel Full Surface - Center Pivot 705 Full mortise - full wrap 711/711CS Full surface - swing clear 715/715CS Full mortise - half wrap B Full Mortise 702 Pulls & plates 700/700CS Steel Full mortise 602 Full surface - center pivot 611 Full surface - swing clear Flush bolts & coordinators 600 HT C Option 1 Hospital tip (600 and 700 series only) Finish Latches, catches & bolts Stainless steel - only available on 700 Series US32D Satin stainless steel D Stainless steel / aluminum - only available on CS Series US32DAN Satin stainless anodized USP Grey primer paint US28 Clear aluminum anodized US4AN Satin brass anodized US10AN Satin bronze anodized 313AN Dark bronze anodized 315AN Black anodized US26AN Bright chrome anodized US26DAN Satin chrome anodized Stops E Steel - only available on 600 Series 600 Grey primer paint Length Exterior hardware 83" 85" 95" 120" Other lengths available up to 120”, consult factory. Handing is required. F Option 2 EPT G Miscellaneous hardware TWP TW8 CON SECHM SECWDHM SECWDWD WD Electric power transfer prep (600, 700, 705, 715, 700CS, 715CS models only) Handing (LH and RH) required for 026, 027, 114, and 224 models Through wire panel (only available on 700CS) Electric through Wire (600, 700, 705, 715 models only) Allegion Connect (600, 700, 705, 715, 700CS models only) Security fasteners - Torx Security fasteners - Torx (half wood, half hollow metal) Security fasteners - Torx (wood door and frame) Wood door fasteners Ives Architectural hardware products A41 A42 Hinges & pivots Pin and barrel hinges Clearance requirements 1/8” Hinge Side Clearance Hinge Side Clearance 3/16” 1/8” Hinge Side Clearance D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates 705 with Adjusta-Stud Consult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. Hinge Side Clearance Hinge Side Clearance 1/32” Frame Irregularity 1/32” Frame Irregularity 1/16” Frame Irregularity 1/16” Frame Irregularity Single door Door under-sizing Model Hinge-side clearance Lock-side clearance Frame irregularity Beveled door clearance Square edged Beveled edged 600 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 602 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 700 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 700CS 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 702 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 705 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 705* 1/2" 1/8" 1/32" 1/32" 21/32" 11/16" 711 7/32" 1/8" 1/32" 1/32" 3/8" 13/32" 711CS 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 715 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 715CS 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" Model Hinge-side clearance Lock-side clearance Frame irregularity Beveled door clearance Square edge total Square edge each door Beveled edge total Beveled edge each door 600 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 602 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 700 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 700CS 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 702 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 705 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 705* 1/2" 3/16" 1/16" 1/16" 1-1/4" 5/8" 1-5/16" 21/32" 711 7/32" 3/16" 1/16" 1/16" 11/16" 11/32" 3/4" 3/8" 711CS 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 715 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 715CS 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" E Stops * Use the Adjusta-Studs with 705 Pair of doors * Use the Adjusta-Studs with 705 G Miscellaneous hardware F Exterior hardware Door under-sizing A42 Ives Architectural hardware products Pin and barrel hinges 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/8” Inset recommended for 1 3/4" doors 48" Maximum door width Non handed for custom cut lengths Bevel or square edge door A43 Hinges & pivots 600 Full mortise pin and barrel continuous hinge - steel 700 Full mortise pin and barrel continuous hinge - stainless steel Certifications Pulls & plates B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Material C 600 - 1012 Cold-rolled steel 700 - 14 Gauge Type 304 stainless steel Finishes BHMA Description Substrate Finish 600 630 Grey primer paint Satin stainless steel Steel Stainless steel USP US32D Options D HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TW8 . . . . . . . . . . . . . Electrical through wire CON. . . . . . . . . . . . . . Allegion Connect Optional mounting hardware SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame 1/8" E I ve s 5 0 0 , 6 0 0 , 7 0 0 For pairs of doors see chart and general information Stops For single door applications: Latches, catches & bolts Custom paint available on 600 series, consult factory. Flush bolts & coordinators #10 X 1/2" Self Drilling, Self Tapping Screws #10 X 1" Wood Screws 1/2” 3/8” Exterior hardware 1/8” GA 0.075” Hi n ge T h i ck n es s 2-1/4 ” 1-3/4” F 1/16” 1/4 ” Clearance for G Miscellaneous hardware Square Edge 5/16" Clearance for Beveled Edge Ives Architectural hardware products A43 Pin and barrel hinges Hinges & pivots 700CS Full mortise pin and barrel continuous hinge w/ decorative cover A44 Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Patented, medical grade, nylon winged bearings For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non handed Bevel or square edge door Pulls & plates Certifications B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators 12-24 X 3/4" Self drilling, self tapping screws Material 14 Gauge Type 304 stainless steel D Latches, catches & bolts C Finishes BHMA Description Substrate Finish 441 600 628 688 709 710 711 712 713 Satin stainless anodized Grey primer paint Clear aluminum anodized Satin brass anodized Satin bronze anodized Dark bronze anodized Black anodized Bright chrome anodized Satin chrome anodized Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Options HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TW8 . . . . . . . . . . . . . Electrical through wire CON. . . . . . . . . . . . . . Allegion Connect Stops Optional mounting hardware E SECHM. . . . . . . . . . . Security screws - hollow metal door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: G Miscellaneous hardware F Exterior hardware For pairs of doors see chart and general information A44 Ives Architectural hardware products Pin and barrel hinges 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing Flush mounted, no inset 48" Maximum door width Non handed for custom cut lengths Bevel or square edge door A45 Hinges & pivots 602 Full surface pin and barrel continuous hinge - steel 702 Full surface pin and barrel continuous hinge - stainless steel Certifications Pulls & plates B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Material C 602 - 1012 Cold-rolled steel 702 - 14 Gauge Type 304 stainless steel Finishes Description Substrate Finish 600 630 Grey primer paint Satin stainless steel Steel Stainless steel USP US32D Options D HT. . . . . . . . . . . . . . . . Hospital tip Latches, catches & bolts BHMA Custom paint available on 600 series, consult factory. Optional mounting hardware Flush bolts & coordinators #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Cover clips SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information 7/16” E 1-3/4” Stops I ve s 6 0 2 , 7 0 2 1-3/4” 3/8” G A 0 .0 7 5 ” Hi n ge T h i ck n es s F Exterior hardware 1-3/4” 1/8” Clearance for Square Edge 5/32" Clearance for Beveled Edge G Miscellaneous hardware Ives Architectural hardware products A45 Pin and barrel hinges Hinges & pivots 705 Full mortise, full wrap pin and barrel continuous hinge - stainless steel A46 Full wrap edge guard Adjustable for undersized and out of square doors 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing Flush mounted, no inset 48" Maximum door width Non handed, handing required for custom cut lengths Bevel or square edge door Pulls & plates Certifications B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Material C 14 Gauge Type 304 stainless steel Finishes BHMA Description Substrate Finish 630 Satin stainless steel Stainless steel US32D Custom paint available, consult factory. Latches, catches & bolts Options D HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric Power Transfer TW8 . . . . . . . . . . . . . Electrical Through Wire CON. . . . . . . . . . . . . . Allegion Connect Optional mounting hardware SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: I ve s 7 0 5 E Stops For pairs of doors see chart and general information GA 0.075” Hi n ge T h i ck n es s GA 0.0625” 3/8” 1-7/8” Exterior hardware 2-1/4” 1-3/4” Note: Provide 0.125” Adjustment F GA 0.075” 3/4” 3/8 ” 3/16” Miscellaneous hardware 3/8" Clearance for Square Edge 13/32" Clearance for Beveled Edge G * Adjusta-Stud allows up to 3/8” width adjustment which ensures proper alignment and easy installation. Adjusta-Stud also makes it possible for future adjustments of the door on the frame through repositioning. A46 Ives Architectural hardware products Edge guard May be difficult to install on inside walls 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 48" Maximum door width Non handed, handing required for custom cut lengths Square edge door Pulls & plates Certifications A47 Meets ANSI 156.26 UL10C certified B Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Material C 611 - 1012 cold-rolled steel 711 - 14 Gauge Type 304 stainless steel Finishes Description Substrate Finish 600 630 Grey primer paint Satin stainless steel Steel Stainless steel USP US32D Options D HT. . . . . . . . . . . . . . . . Hospital tip Latches, catches & bolts BHMA Custom paint available on 600 series, consult factory. Optional mounting hardware Flush bolts & coordinators SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information I ve s 6 1 1 , 7 1 1 E 1-3/8” Stops GA 0.075” Hi n ge T h i ck n es s 3/8” 1/4” 1-9/16” 1-3/4” F 3/4” Exterior hardware 7/32" Clearance for Square Edge 5/32” G Miscellaneous hardware 1 3/8" [34.9] 5/16" [7.9] 1/2" [12.7] [44.5] GA. 0.075" HINGE THICKNESS 3/4" [19.1] 9/16" 1/2" [14.3] [12.7] 1 3/4" 0.060" [1.5] 611 Swing clear pin and barrel continuous hinge - steel 711 Swing clear pin and barrel continuous hinge - stainless steel Hinges & pivots HINGE Pin and barrel hinges Ives Architectural hardware products A47 Pin and barrel hinges Hinges & pivots 711CS Swing clear pin and barrel continuous hinge w/ decorative cover B Pulls & plates A48 Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Edge guard Easy to install mounting location on mortise end of frame 2-11/16" minimum frame face requirement Patented, medical grade, nylon winged bearings For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non Handed, handing required for custom cut lengths Square edge door Certifications Meets ANSI 156.26 UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 120" Standard mounting hardware C 12-24 X 3/4" Self drilling, self tapping screws Material 14 Gauge Type 304 stainless steel D Latches, catches & bolts Finishes BHMA Description Substrate Finish 441 600 628 688 709 710 711 712 713 Satin stainless anodized Grey primer paint Clear aluminum anodized Satin brass anodized Satin bronze anodized Dark bronze anodized Black anodized Bright chrome anodized Satin chrome anodized Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Optional mounting hardware Stops SECHM. . . . . . . . . . . Security screws - hollow metal door and frame WD. . . . . . . . . . . . . . . Wood door and frame E For single door applications: G Miscellaneous hardware F Exterior hardware For pairs of doors see chart and general information A48 Ives Architectural hardware products Pin and barrel hinges Half wrap edge guard 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non handed, handing required for custom cut lengths Square edge door A49 Hinges & pivots 715 Full mortise, half wrap pin and barrel continuous hinge - stainless steel Certifications B Pulls & plates Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators #10 X 1/2" Self Drilling, Self Tapping Screws #10 X 1" Wood Screws Material 14 Gauge Type 304 Stainless Steel C Finishes BHMA Description Substrate Finish 630 Satin stainless steel Stainless steel US32D Custom paint available on 600 series, consult factory. Options HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TW8 . . . . . . . . . . . . . Electrical through wire CON. . . . . . . . . . . . . . Allegion Connect D Latches, catches & bolts Optional mounting hardware SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame I ve s 7 1 5 For single door applications: For pairs of doors see chart and general information E Stops GA 0.075” Hi n ge T h i ck n es s 3/8” 1/4” 1-3/4” Exterior hardware F 3/4” 11/4" /4” Clearance for Square Edge 3/8" [9.5] HINGE 3/4" [19.1] [1.5] Miscellaneous hardware GA 0.060" 5/8" [15.9] GA 0.075" HINGE THICKNESS 2" [50.8] G 1/4" [6.4] HINGE ALLOWANCE Ives Architectural hardware products FRAME A49 Pin and barrel hinges Hinges & pivots 715CS Full mortise, half wrap pin and barrel continuous hinge w/ decorative cover Pulls & plates A50 Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Half wrap edge guard Patented, medical grade, nylon winged bearings For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing Flush mounted, no inset 48" Maximum door width Non handed, handing required for custom cut lengths Square edge door B Certifications Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Flush bolts & coordinators Standard mounting hardware 12-24 X 3/4" Self drilling, self tapping screws Material C 14 Gauge Type 304 stainless steel D Latches, catches & bolts Finishes BHMA Description Substrate Finish 441 600 628 688 709 710 711 712 713 Satin stainless anodized Grey primer paint Clear aluminum anodized Satin brass anodized Satin bronze anodized Dark bronze anodized Black anodized Bright chrome anodized Satin chrome anodized Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Options EPT . . . . . . . . . . . . . . Electric power transfer Optional mounting hardware E Stops SECHM. . . . . . . . . . . Security screws - hollow metal door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: G Miscellaneous hardware F Exterior hardware For pairs of doors see chart and general information A50 Ives Architectural hardware products Pivots A51 Hinges & pivots The door rests on the bottom pivot in this application. This reduces the stress on the frame by distributing the weight of the door throughout the floor and structure. By taking advantage of the strength of the structure, Used in conjunction with rescue hardware, center hung pivots allows B pocket pivots also provide an aesthetic option for your opening. Pulls & plates this makes a pivot the ideal solution for your heavy doors. Center and a bi-directional door swing in emergency situations. When a patient depresses allowing the door to swing in the opposite direction without C causing damage to the frame. Flush bolts & coordinators becomes trapped behind an inward swing door, the center tong D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A51 A52 Hinges & pivots Pivots General information Complete line of 3/4" offset, 1-1/2" offset, center hung, intermediate and power transfer pivots with all exposed parts made of brass or stainless steel for maximum corrosion resistance. Designed for heavy weight doors in high frequency(above 1250 cycles per day) applications. FINISHES D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates ANSI CERTIFIED All Ives Pivots are certified to ANSI 156.26, Grade 1 UL LISTED All Ives non-rated brass Pivots are tested and approved UL 10C (20 min). All Ives rated stainless steel Pivots are tested and approved UL 10C (3 hrs). MATERIAL High strength brass and 304 series stainless steel forgings, and castings for rated and non-rated doors combined with radial and needle precision bearings for smooth operation. See specific models for more information. PIVOT DUTY Last digit in pivot set number reflects the maximum door weight in hundreds of pound, e.g., 7215 = 500 pounds. For sets designated as “heavy duty”, add 1,000 pounds, e.g., 7237F HD set = 1700 pounds. Pivots for lead lined doors are available. Verify location and size of lead lining in door to determine product compatibility. Consult product support. See table below for selecting the proper pivot for the application. Add additional Intermediate Pivots for each 100 pounds of door weight and/or for doors exceeding 7' in height. Intermediate pivots should be placed every 2'6" as needed. E Stops MOUNTING HARDWARE Stainless steel machine screws and wood screws standard for all metal door and frames and metal frame/wood door applications. Positive locking vertical adjustment mechanism allows the installer to precisely position the door and balance the load. A52 F Exterior hardware G Miscellaneous hardware Pivot type Bottom style mounting 3/4" Offset Jamb mounted 3/4" Offset Jamb mounted 3/4" Offset Jamb mounted 3/4" Offset Jamb mounted 3/4" Offset Floor mounted 3/4" Offset Floor mounted 3/4" Offset Floor mounted 3/4" Offset Mortise cement case 3/4" Offset Mortise cement case 3/4" Offset Floor mounted 3/4" Offset Mortise cement case 1-1/2" Offset Floor mounted 1-1/2" Offset Mortise cement case Center hung Floor mounted Center hung Floor mounted Center hung Jamb mounted Center hung Mortise cement case Center hung Mortise cement case UL listing none none 20 Minute 3 Hour none 20 Minute 3 Hour 20 Minute 3 Hour 3 Hour 3 Hour 3 Hour 3 Hour none none none none none Ives Architectural hardware products Description Substrate Finish 600 605 606 610 613 619 622 625 626 629 630 631 632* 639* 640** 646** 643e/716 689 691 695 706 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Bright stainless Satin brass Matte black Satin brass Satin bronze Oil rubbed bronze Satin nickel Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Stainless steel Steel Steel Steel Steel Brass/Stainless Brass/Stainless Brass/Stainless Brass/Stainless Brass/Stainless USP US3 US4 US10 US10B US15 BLK US26 US26D US32* US32D* BLK US3 US10 US10B US15 643e/716 SP28 SP10 SP313 SP4 * Available on F fire-rated pivots and pocket pivots only. ** Available on pocket pivots only For other colors, consult product support. ELECTRIFICATION OPTIONS Electrified pivots are non-load bearing. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Throughwire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. The Ives Power Transfer Intermediate (PT INT) pivots and Electrified Pocket Pivot (E) are available standard with 4 wire. Other wire applications are available, consult product support. These are also available with the Allegion Connect 4 or 8-pin Connector (CON) which makes it easy to connect to other electrical consumption devices. When ordering separate pivot applications, the following descriptions will be used for the pivot. 7200 SERIES PIVOT SELECTION CHART Pivot set 7212 7212V 7215 7215F 7222 7226 7226F 7227 7227F 7230F 7237F 7244F 7245F 7253 7255 7255J 7256 7259 BHMA Max. door weight 200 200 500 500 200 600 600 700 700 1,000 1,750 400 500 300 500 500 600 1,000 Handing LH or RH LH or RH LH or RH LH or RH LH or RH Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Top 7212-7215-7222-7226-7227 TOP 7212V TOP 7212-7215-7222-7226-7227 TOP 7215F-7226F-7227F TOP 7212-7215-7222-7226-7227 TOP 7212-7215-7222-7226-7227 TOP 7215F-7226F-7227F TOP 7212-7215-7222-7226-7227 TOP 7215F-7226F-7227F TOP 7230F-7237F TOP 7230F-7237F TOP 7244F-7245F TOP 7244F-7245F TOP 7253-7255-7255J-7256 TOP 7253-7255-7255J-7256 TOP 7253-7255-7255J-7256 TOP 7253-7255-7255J-7256 TOP 7259 TOP Bottom 7212 BTM 7212 BTM 7215 BTM 7215F BTM 7222 BTM 7226 BTM 7226F BTM 7227 BTM 7227F BTM 7230F BTM 7237F BTM 7244F BTM 7245F BTM 7253 BTM 7255 BTM 7255J BTM 7256 BTM 7259 BTM Intermediate 7212-7212V-7222 INT 7212-7212V-7222 INT 7215-7226-7227 INT 7215F-7226F-7227F INT 7212-7212V-7222 INT 7215-7226-7227 INT 7215F-7226F-7227F INT 7215-7226-7227 INT 7215-7226-7227 INT 7215F-7226F-7227F INT 7230F-7237F INT 7230F-7237F INT 7244F-7245F INT 7244F-7245F INT none none none none Pivots - SET - LH - US3 A53 7212 Hinges & pivots How to order Model 7212 7212V Pulls & plates 7215 7215F B 7222 7226 7226F 7227 7227F Flush bolts & coordinators 7230F 7237F 7244F C 7245F 7253 7255 7255J 7256 Latches, catches & bolts 7259 91105F E91105F D Style SET TOP BTM INT PT INT Top and bottom set Top pivot only Bottom pivot only Intermediate pivot only Power transfer intermediate pivot only Available only with 7215, 7226, and 7227. Stops LH RH E Handing Left hand door Right hand door Required on 7212, 7212V, 7222, all INT, and all PT INT. Finish Finish USP US3 US4 US10 US10B US15 BLK US26 US26D US32* US32D* 643e/716 SP28 SP10 SP313 SP4 F G Miscellaneous hardware Description Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Bright stainless Satin brass Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Exterior hardware BHMA 600 605 606 610 613 619 622 625 626 629 630 643e/716 689 691 695 706 * Only available on F (fire rated) models. For other colors, consult factory. Ives Architectural hardware products A53 7212 3/4" Offset pivot, 200lb with top header mount Top B Pulls & plates A54 Hinges & pivots Pivots Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7212 Set (7212 Top and 7212 Btm) 7212 Top (7212-7215-7222-7226-7227 Top), header mount 7212 Btm (7212 Btm), jamb mount Certifications Available accessory items Meets ANSI/BHMA A156.4 C07131 UL Listed, 20 minute fire doors Use 7212 INT (7212-7212V-7222) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Material substrate Btm Made from cast brass 7212V 3/4" Offset pivot, 200lb with top jamb mount D Latches, catches & bolts C Flush bolts & coordinators See finishes below Top Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7212V Set (7212V Top and 7212 Btm) 7212V Top (7212V), jamb mount 7212 Btm (7212 Btm), jamb mount Certifications Available accessory items Meets ANSI/BHMA A156.4 C07131 UL Listed, 20 minute fire doors Use 7212 INT (7212-7212V-7222) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Btm Exterior hardware E Stops Material substrate Made from cast brass See finishes below. G Miscellaneous hardware F 7212 and 7212V Finishes BHMA Description Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. A54 Ives Architectural hardware products Pivots 7215 Pivot Set 7215F Pivot Set Available accessory items C Use 7215 INT (7215-7226-7227) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Use 7215F INT (7215F-7226F-7227F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For electrical applications, use 7215PT INT (7215-7226-7227 PT INT) Power Transfer Intermediate pivot. For additional electrical wiring applications, consult product support. Flush bolts & coordinators Material substrate 7215 - Made from cast brass 7215F - Made from 304 series stainless steel B Certifications Meets ANSI/BHMA A156.4 C07131 7215 - UL Listed, 20 minute fire doors 7215F - UL Listed, 3 hour fire doors Pulls & plates Btm Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7215 Set (7215 Top and 7215 Btm) 7215 Top (7212-7215-7222-7226-7227 Top), header mount 7215 Btm (7215 Btm), jamb mount 7215F Set (7215F Top and 7215F Btm) 7215F Top (7215F-7226F-7227F Top), header mount 7215F Btm (7215F Btm), jamb mount Optional WP resistant bottom pivot is modified for improved corrosion resistance Available in US26D (626) or US32D (630) only A55 Top Hinges & pivots 7215 3/4" Offset pivot, 500lb with top header mount 7215F 3/4" Offset pivot, 500lb with top header mount, fire rated D Latches, catches & bolts 7215 Finishes Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 F Exterior hardware Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted E Description 605 606 610 613 619 622 625 626 --689 691 695 706 Stops BHMA 7215F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Ives Architectural hardware products G Description 629 630 631 632 639 --689 691 695 706 Miscellaneous hardware BHMA A55 Pivots A56 Hinges & pivots 7222 3/4" Offset pivot, 200lb with top header mount and bottom base mount Pulls & plates Top Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7222 Set (7222 Top and 7222 Btm) 7222 Top (7212-7215-7222-7226-7227 Top), header mount 7222 Btm (7222 Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07162 Made from cast brass B Available accessory items Use 7222 INT (7212-7212V-7222) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Latches, catches & bolts C Flush bolts & coordinators Btm E Stops D 7222 Finishes BHMA Description Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A56 Ives Architectural hardware products Pivots Available accessory items C Use 7226 INT (7215-7226-7227) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Use 7226F INT (7215F-7226F-7227F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For electrical applications, use 7226PT INT (7215-7226-7227 PT INT) Power Transfer Intermediate pivot. For additional electrical wiring applications, consult product support. Flush bolts & coordinators Material substrate 7226 - Made from cast brass 7226F - Made from 304 series stainless steel B Certifications Meets ANSI/BHMA A156.4 C07162 7226 - UL Listed, 20 minute fire doors 7226F - UL Listed, 3 hour fire doors Pulls & plates Btm Maximum door load 600 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7226 Set (7226 Top and 7226 Btm) 7226 Top (7212-7215-7222-7226-7227 Top), header mount 7226 Btm (7226 Btm), base plate mount 7226F Set (7226F Top and 7226F Btm) 7226F Top (7215F-7226F-7227F Top), header mount 7226F Btm (7226F Btm), base plate mount A57 Top Hinges & pivots 7226 3/4" Offset pivot, 600lb with top header mount and bottom base mount 7226F 3 /4" Offset pivot, 600lb with top header mount and bottom base mount, fire rated D Latches, catches & bolts 7226 Finishes 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 7226F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Ives Architectural hardware products G Description 629 630 631 632 639 --689 691 695 706 Miscellaneous hardware BHMA F Finish Exterior hardware Substrate E Description Stops BHMA A57 Pivots A58 Hinges & pivots 7227 3/4" Offset pivot, 700lb with top header mount and bottom base mount 7227F 3/4" Offset pivot, 700lb with top header mount and bottom base mount, fire rated Flush bolts & coordinators B Pulls & plates Top Btm Maximum door load 700 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7227 Set (7227 Top and 7227 Btm) 7227 Top (7212-7215-7222-7226-7227 Top), header mount 7227 Btm (7227 Btm), base plate mount 7227F Set (7227F Top and 7227F Btm) 7227F Top (7215F-7226F-7227F Top), header mount 7227F Btm (7227F Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07121 7227 - UL Listed, 20 minute fire doors 7227F - UL Listed, 3 hour fire doors 7227 - Made from cast brass 7227F - Made from 304 series stainless steel Available accessory items D Latches, catches & bolts C Use 7227 INT (7215-7226-7227) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Use 7227F INT (7215F-7226F-7227F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For electrical applications, use 7227PT INT (7215-7226-7227 PT INT) Power Transfer Intermediate pivot. For additional electrical wiring applications, consult product support. F Exterior hardware E Stops 7227 Finishes BHMA Description Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware 7227F Finishes For other colors, consult factory. A58 Ives Architectural hardware products Pivots Maximum door load 1000 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7230F Set (7230F Top and 7230F Btm) 7230F Top (7230F-7237F Top), header mount 7230F Btm (7230F Btm), base plate mount Available accessory items Use 7230F INT (7230F-7237F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. B Material substrate Made from 304 series stainless steel Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07162 UL Listed, 3 hour fire doors A59 Top 3 /4" Offset pivot, 1000lb with top header mount and bottom base mount, fire rated Hinges & pivots 7230F Flush bolts & coordinators Btm C D Latches, catches & bolts 7230F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 E Description 629 630 631 632 639 --689 691 695 706 Stops BHMA For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A59 Pivots A60 Hinges & pivots 7237F 3 /4" Offset pivot, 1750lb with top header mount and bottom base mount, fire rated B Pulls & plates Top Maximum door load 1750 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7237F Set (7237F Top and 7237F Btm) 7237F Top (7230F-7237F Top), header mount 7237F Btm (7237F Btm), mortised cement case mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07111 UL Listed, 3 hour fire doors Made from 304 series stainless steel Available accessory items D Latches, catches & bolts C Flush bolts & coordinators Btm Use 7237F INT (7230F-7237F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. E Stops 7237F Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A60 Ives Architectural hardware products Pivots Maximum door load 400 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7244F Set (7244F Top and 7244F Btm) 7244F Top (7244F-7245F Top), header mount 7244F Btm (7244F Btm), base mount Available accessory items Btm Use 7244F INT (7244F-7245F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. B Material substrate Made from 304 series stainless steel Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07162 UL Listed, 3 hour fire doors A61 Top Hinges & pivots 7244F 1 1/2" Offset pivot, 400lb with top header mount and bottom base mount, fire rated C Flush bolts & coordinators D Latches, catches & bolts 7244F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 E Description 629 630 631 632 639 --689 691 695 706 Stops BHMA For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A61 Pivots A62 Hinges & pivots 7245F 1 1/2" Offset pivot, 500lb with top header mount and bottom base mount, fire rated B Pulls & plates Top Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7245F Set (7245F Top and 7245F Btm) 7245F Top (7244F-7245F Top), header mount 7245F Btm (7245F Btm), mortised cement case mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07121 UL Listed, 3 hour fire doors Made from 304 series stainless steel Available accessory items D Latches, catches & bolts C Flush bolts & coordinators Btm Use 7245F INT (7244F-7245F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. E Stops 7245F Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A62 Ives Architectural hardware products Pivots NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult Intermediate Pivot product support. Use for door heights over 7'0" and one every 2'6" as needed. A63 7212V-7222 INT 7212-7212V-7222 INT 3/4" Offset intermediate pivot This intermediate pivot is used with 7212, 7212V, and 7222 offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH B Material substrate Made from cast brass Pulls & plates Intermediate Pivot 7212V-7222 INT Certifications Meets ANSI/BHMA A156.4 C07382 UL Listed, 20 minute fire doors Hinges & pivots Intermediate Pivot Intermediate Pivot 7212V-7222 INT 7212V-7222 INT C Flush bolts & coordinators D Latches, catches & bolts 7212-7212V-7222 INT Finishes Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 E Description Stops BHMA For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A63 NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult product support. Use for door heights over 7'0" and one every 2'6" as needed. Intermediate Pivot 7215-7226-7227 INT 7215F-7226F-7227F INT B Pulls & plates A64 Hinges & pivots Intermediate Pivot 7215-7226-7227 INT Intermediate Pivots 7215F-7226F-7227F INT 7215-7226-7227 INT 3/4" Offset intermediate pivot Intermediate Pivot 7215F-7226F-7227F INT 3/4" Offset intermediate pivot, fire rated 7215-7226-7227 INT 7215-7226-7227 intermediate pivot is used with 7215, 7226, and 7227 offset pivots. 7215F-7226F-7227F intermediate pivot is used with 7215F, 7226F, and 7227F offset pivots. 7215F-7226F-7227F INT Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Certifications Flush bolts & coordinators 7215-7226-7227 - Meets ANSI/BHMA A156.4 C07321 7215-7226-7227 - UL Listed, 20 minute fire doors 7215F-7226F-7227F - Meets ANSI/BHMA A156.4 C07371 7215F-7226F-7227F - UL Listed, 3 hour fire doors Material substrate D Latches, catches & bolts C Intermediate Pivot 7215-7226-7227 INT 7215F-7226F-7227F INT 7215-7226-7227 - Made from cast brass 7215F-7226F-7227F - Made from 304 series stainless steel F Exterior hardware E Stops 7215-7226-7227 INT Finishes BHMA Description Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware 7215F-7226F-7227F INT Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. A64 Ives Architectural hardware products Intermediate Pivots Intermediate Pivot 7230F-7237F INT 3/4" Offset intermediate pivot, fire rated This intermediate pivot is used with 7230F and 7237F offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Intermediate Pivot 7230F-7237F INT B Material substrate Made from 304 series stainless steel Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07311 UL Listed, 3 hour fire doors A65 NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult Intermediate Pivot product7230F-7237F support. UseINT for door heights over 7'0" and one every 2'6" as needed. Hinges & pivots Intermediate Pivot 7230F-7237F INT 7230F-7237F INT C Flush bolts & coordinators Intermediate Intermediate PivotPivot 7244F-7245F 7244F-7245F INT INT Intermediate Pivot 7244F-7245F INT Certifications Material substrate Meets ANSI/BHMA A156.4 C07371 UL Listed, 3 hour fire doors Made from 304 series stainless steel E Stops Intermediate Pivot 7244F-7245F INT D This intermediate pivot is used with 7244F and 7245F offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Latches, catches & bolts 7244F-7245F INT 1 1/2" Offset intermediate pivot, fire rated F Exterior hardware 7230F-7237F INT and 7244F-7245F INT Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Ives Architectural hardware products G Description 629 630 631 632 639 --689 691 695 706 Miscellaneous hardware BHMA A65 Power Transfer Intermediate Pivot 7215-7226-7227 PT Pivots Hinges & pivots 7215PT-7226PT-7227PT INT 3/4" Offset power transfer intermediate pivot B Pulls & plates A66 7215PT-7226PT-7227PT intermediate pivot is used with 7215, 7226, and 7227 offset pivots. Non-load bearing Comes standard with 28 gauge TW4. For additional electrical wiring applications, consult product support. Rated 50 VDC or VAC @ 3.5 amps. Continuous or 16 amp pulse, maximum pulse 400 milliseconds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Certifications Material substrate UL Listed, 20 minute fire doors Meets UL 634 Made from cast brass E Stops D Latches, catches & bolts C Flush bolts & coordinators Power Transfer Intermediate Pivot 7215-7226-7227 PT G Miscellaneous hardware F Exterior hardware 7215PT-7226PT-7227PT INT Finishes BHMA Description Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. A66 Ives Architectural hardware products Pivots 7253 Pivot Set B Material substrate Made from cast brass Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07032 UL Listed, 20 minute fire doors A67 Top Maximum door load 300 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7253 Set (7253 Top and 7253 Btm) 7253 Top (7253-7255-7255J-7256 Top), header mount 7253 Btm (7253 Btm), base plate mount Hinges & pivots 7253 Center hung pivot, 300lb with bottom base mount Dimensions BHMA 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Finish Bright brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 Pivot SetSatin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted D Clearance Depth of Mortise Substrate Latches, catches & bolts Table D 605 7253 606 610 613 619 622 625 626 --689 691 695 706 Description C 7253 Finishes Btm Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). For other colors, consult factory. E Stops 3 Pivot Set F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A67 7255 Pivot Set Pivots Hinges & pivots 7255 Center hung pivot, 500lb with bottom base mount A68 B Pulls & plates Top Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7255 Set (7255 Top and 7255 Btm) 7255 Top (7253-7255-7255J-7256 Top), header mount 7255 Btm (7255 Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07032 UL Listed, 20 minute fire doors Made from cast brass Dimensions Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm)to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). C Flush bolts & coordinators Btm 7255 Finishes Latches, catches & bolts BHMA D Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) 605 606 610 613 619 622 625 626 --689 691 695 706 Description Bright brass 7255 Pivot Set Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted E Stops For other colors, consult factory. G Miscellaneous hardware F Exterior hardware 7255 Pivot Set A68 Ives Architectural hardware products Substrate Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 Pivots 7255J Pivot Set 7255J Pivot Set B Material substrate Made from cast brass Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07042 UL Listed, 20 minute fire doors A69 Top Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7255J Set (7255J Top and 7255J Btm) 7255J Top (7253-7255-7255J-7256 Top), header mount 7255J Btm (7255J Btm), jamb mount Hinges & pivots 7255J Center hung pivot, 500lb with bottom jamb mount Dimensions 7255 Finishes BHMA 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Substrate Finish Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 D Clearance Depth of Mortise Description 7255J Pivot Set Bright brass Latches, catches & bolts Table D 605 606 610 613 619 622 625 626 --689 691 695 706 C Btm Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). For other colors, consult factory. Stops E 7255J Pivot Set F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A69 7256 Pivot Set Pivots Hinges & pivots 7256 Center hung pivot, 600lb with bottom base mount A70 B Pulls & plates Top Maximum door load 600 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7256 Set (7256 Top and 7256 Btm) 7256 Top (7253-7255-7255J-7256 Top), header mount 7256 Btm (7255J Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07021 UL Listed, 20 minute fire doors Made from cast brass Flush bolts & coordinators Dimensions Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). C Btm Latches, catches & bolts 7256 Finishes D Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) BHMA Description Substrate Finish 605 606 610 613 619 622 625 626 --689 691 695 706 Bright brass 7256 Satin Pivotbrass Set Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 E Stops For other colors, consult factory. G Miscellaneous hardware F Exterior hardware 56 Pivot Set A70 Ives Architectural hardware products Pivots 7259 Pivot Set B Material substrate Made from cast brass Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07011 UL Listed, 20 minute fire doors A71 Top Hinges & pivots 7259 Center hung pivot, 1000lb with bottom base mount Maximum door load 1000 pounds Recommended for use with 2" to 3" minimum door thickness, consult product support if doors are thicker than 3" Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7259 Set (7259 Top and 7259 Btm) 7259 Top (7259 Top) header mount 7259 Btm (7259 Btm), base frame mount Dimensions Btm BHMA 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 D Clearance Depth of Mortise Bright brass 7259 Pivot Set Satin brass Substrate Latches, catches & bolts Table D 605 606 610 613 619 622 625 626 --689 691 695 706 Description C 7259 Finishes Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). For other colors, consult factory. E Stops 7259 Pivot Set F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A71 Pivots Hinges & pivots 91105F Pocket pivot/hinge, fire rated B Pulls & plates A72 Maximum door load of 90 pounds per pivot Use three pivots for doors 7'0" tall and one every 2'6" for taller doors as needed Full mortise Recommended for use with 1-3/4" door thickness only Not recommended for doors larger than 4'0" X 8'0" Not recommended for wood frames Allows door to open a full 90° Non-handed Certifications Material substrate Meets ANSI/BHMA A156.4 C07611 UL Listed, 3 hour fire doors Made from 304 series stainless steel C Flush bolts & coordinators 91105F Finishes BHMA Description Substrate Finish 600 629 630 632 639 640 646 --695 Primer painted Bright stainless Satin stainless Bright brass Satin bronze Satin bronze Satin nickel Aged bronze Dark bronze painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel USP US32 US32D US3 US10 US10 US15 643e/716 SP313 For other colors, consult factory. D Latches, catches & bolts Door Portion 1-3/8 1-1/8 1-9/64 E Stops 1-9/64 5-17/32 G Miscellaneous hardware F Exterior hardware Pocket Pivot A72 Ives Architectural hardware products Cutout Door Portion CL of Door 1-1/8 Jamb Portion Pivots Hinges & pivots E91105F Pocket pivot/hinge, power transfer, fire rated B Material substrate Made from 304 series stainless steel Pulls & plates Certifications Meets ANSI/BHMA A156.4 C07611 UL Listed, 3 hour fire doors A73 Non-load bearing Comes standard with 28 gauge TW4. For additional electrical wiring applications, consult product support. Rated 50 VDC or VAC @ 3.5 amps continuous or 16 amp pulse, maximum pulse 400 milliseconds Full mortise Recommended for use with 1-3/4" door thickness only Not recommended for doors larger than 4'0" X 8'0" Not recommended for wood frames Allows door to open a full 90° Non-handed E91105F Finishes Substrate Finish 600 629 630 632 646 --695 Primer painted Bright stainless Satin stainless Bright brass Satin nickel Aged bronze Dark bronze painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Door Portion Stainless steel USP US32 US32D US3 US15 643e/716 SP313 C Description Flush bolts & coordinators BHMA For other colors, consult factory. Latches, catches & bolts 1-3/8 D 1-1/8 1-9/64 1-9/64 E Pocket Pivot Cutout Door Portion Stops 5-17/32 CL of Door 1-1/8 Jamb Portion F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A73 G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A74 Hinges & pivots Notes A74 Ives Architectural hardware products Pulls & plates General information...................................................................................................................B2 Pull mounting hardware How to order:...............................................................................................................................B9 Architectural pulls and push bars 22 Flush pull - rectangle..........................................................................................................B57 218 Flush pull - small circle.....................................................................................................B57 221 Flush pull - large circle..................................................................................................... B58 222 Flush pull - rectangle..................................................................................................... B58 223 Flush pull - oval................................................................................................................ B59 227 Flush pull - deep well...................................................................................................... B59 Decorative flush pulls 919 Decorative flush pull - oval............................................................................................B60 950 Decorative flush pull - rectangle ................................................................................B60 955 Decorative flush pull - square, deep well.................................................................... B61 960 Decorative flush pull - rectangle, narrow................................................................... B61 962 Decorative flush pull - rectangle.................................................................................. B62 E Stops Sliding door pulls 230 Sliding door edge pull..................................................................................................... B63 42 Pocket sliding door bolt.................................................................................................... B63 990 Sliding door pull.............................................................................................................. B64 991 Sliding door pull - privacy............................................................................................... B65 Exterior hardware Screen door pull F How to order:............................................................................................................................ B38 9264 Offset long door pull, rounded tip............................................................................ B39 9266 Straight long door pull, rounded tip........................................................................ B39 Flush pulls D Long door pulls Latches, catches & bolts 8111-5 Solid door pull................................................................................................................B23 8112-5 Solid door pull...............................................................................................................B23 8121 Solid door pull.................................................................................................................. B24 8169 C Style (tubular series) offset solid door pull..........................................................B25 8181 Georgian 90° offset solid door pull............................................................................ B26 8189 Athens offset tubular door pull...................................................................................B27 8281 Georgian straight solid door pull................................................................................ B28 8312 Plymouth offset solid door pull.................................................................................. B29 8320 Plymouth offset solid door pull................................................................................. B30 8371 Addison flat tip straight solid door pull..................................................................... B31 8372 Camelot steeple tip straight tubular door pull........................................................B32 8373 Brookshire acorn tip straight tubular door pull.......................................................B33 8700 Greenwich arc straight solid door pull..................................................................... B34 8800 Greenwich arc offset solid door pull.........................................................................B35 8848 Latitude straight solid door pull............................................................................... B36 8975 Rhodes straight solid door pull...................................................................................B37 C Decorative pulls Flush bolts & coordinators 8102HD Solid door pull - 3/4" round..................................................................................... B11 8103HD Solid door pull - 1" round......................................................................................... B12 8103EZHD Solid door pull - 1" round Large 2-1/2" clearance for the accessibility applications............................................................................................................................ B13 8105 Solid door pull - 1" flattened........................................................................................ B14 8145EZHD 45° Offset solid door pull................................................................................... B15 8190HD 90° Offset solid door pull....................................................................................... B16 8190EZHD 90° Offset solid door pull...................................................................................B17 9100HD Solid push bar............................................................................................................ B18 9103EZHD Solid straight pull/push bar combo (8103EZHD Pull + 9100HD Push)..................................................................................... B19 9145EZHD 45° Offset pull/push bar combo (8145HD pull + 9100HD push)............ B20 9190HD Solid 90° Offset pull/push bar combo (8190HD pull + 9100HD push)....... B21 9190EZHD Solid 90° Offset pull/push bar combo (8190EZHD pull + 9100HD push).....................................................................................B22 B1 Architectural and decorative pulls VR810-DT with black grip..................................................................................................... B48 VR814-DT without black grip............................................................................................... B48 VR810-NL LHR with black grip............................................................................................. B49 VR810-NL RHR with black grip............................................................................................. B49 VR814-NL LHR without black grip...................................................................................... B49 VR814-NL RHR without black grip....................................................................................... B49 VR810-NL-V with black grip................................................................................................. B50 VR814-NL-V without black grip........................................................................................... B50 VR900 RHR with black grip................................................................................................... B51 VR900 LHR with black grip.................................................................................................... B51 VR904 RHR without black grip............................................................................................. B51 VR904 LHR without black grip.............................................................................................. B51 VR900LLP RH with black grip...............................................................................................B52 VR900LLP LH with black grip................................................................................................B52 VR904LLP RH without black grip.........................................................................................B52 VR904LLP LH without black grip.........................................................................................B52 VR910-DT with black grip......................................................................................................B53 VR914-DT without black grip................................................................................................B53 VR910-NL with black grip..................................................................................................... B54 VR914-NL without black grip............................................................................................... B54 VR910M-DT with black grip.................................................................................................. B55 VR914M-DT without black grip........................................................................................... B55 VR910M-NL RHR with black grip.......................................................................................... B56 VR910M-NL LHR with black grip.......................................................................................... B56 VR914M-NL RHR without black grip................................................................................... B56 VR914M-NL LHR without black grip.................................................................................... B56 Pulls & plates Thru-bolt mounts.......................................................................................................................B5 Concealed mounts......................................................................................................................B6 Back to back mounts................................................................................................................. B7 Push/Pull combo mounts.........................................................................................................B8 Vandal resistant trim A Architectural pulls and pushbars heavy duty, solid construction Hinges & pivots Table of contents 25 Screen door pull.................................................................................................................. B65 Push and pull plates G Miscellaneous hardware How to order:............................................................................................................................B40 8200 Push plate....................................................................................................................... B41 8300 Pull plate, prep for pull (less pull)............................................................................. B41 8302 Pull plate......................................................................................................................... B42 8303 Pull plate......................................................................................................................... B43 8305 Pull plate........................................................................................................................ B44 8311 Pull plate........................................................................................................................... B45 Protection plates 8400 Commercial protection plates...................................................................................B47 8402 UL Commercial protection plates.............................................................................B47 Ives Architectural hardware products B1 A Hinges & pivots Architectural pulls and pushbars heavy duty, solid construction General information ANSI Certified All Ives architectural pulls, push bars, decorative pulls, and long door pulls meets ANSI 156.06 ADA Compliant pulls (EZ) Material All architectural pulls, push bars and decorative pulls are made of heavy duty, solid bar stock or castings. All long door pulls are made from tubular stock. Available material substrates are below. See pull model detailed pages for material availability. Stainless Steel 304 Series Stainless Steel 316 Series (Standard for all EZ pulls, EZ push/pull combo, and long door pulls. Available on 9100 series push bars as well.) Brass Aluminum 6061-T6 Alloy Care and maintenance for stainless steel finishes Stainless steel requires periodic cleaning just as other materials do when in service. Stainless architectural building components, for instance, are subject to road salt spray at ground level and deposits from polluted urban air at higher levels. Finger marks, deposits from tobacco smoke, stains from hard water or food left on to dry all detract from the original attractive appearance of stainless steel applications. Cleaning methods and the frequency with which there are employed vary considerably according to application. One of the outstanding features of stainless steel is the ease with which its fine appearance can be maintained. In many instances, only periodic warm water wash is sufficient to restore the original shine. In other cases, cleansing with a strong sterilizing solution may be required more frequently. Between these extremes are a broad range of cleaning requirements and methods. In all cases, there are some important “do’s and dont’s” that should be followed. Don't Don’t use ordinary steel wool or other metal scrapers to remove stubborn dirt. Don’t allow dirt to accumulate. Don’t allow protective coatings to remain on new building components. Remove all traces of adhesive as well as plaster, terrazzo, paint and other construction “splashes”. Don’t use harsh, untested cleaners. Heavy duty All Ives architectural pulls, push bars and long door pulls come standard with heavy duty (HD) machining and mounting hardware to withstand high traffic and abuse applications which exceed industry standards. Many decorative pulls also come standard with heavy duty machining and hardware. Please see the list of pulls that come standard with heavy duty mounting hardware. G Miscellaneous hardware F E Stops Do Wash regularly with warm water and mild soap detergent using a clean cloth or soft brush. Remove stubborn grime using recommended cleaners and methods. Always clean in the direction of the original polish lines. Always rinse after cleaning and wipe dry. Exterior hardware D Latches, catches & bolts C Flush bolts & coordinators B2 Pulls & plates All Ives ADA compliant pulls (reference local authority having jurisdiction) come with the EZ designation. These pulls all have a door to pull clearance of 2.1/2" or greater. All stainless steel EZ pulls come standard with 316 Series Stainless which make them highly recommended for all external applications. B2 Ives Architectural hardware products Architectural and decorative pulls Decorative A Architectual Long door pull Model Heavy duty machining Model Heavy duty machining Model Heavy duty machining 5/16-18 8169 3/8-16 9264 3/8-16 3/8-16 8181 3/8-16 9266 3/8-16 8103EZHD 3/8-16 8281 3/8-16 8145EZHD 3/8-16 8189 3/8-16 8190HD 3/8-16 8312 3/8-16 8190EZHD 3/8-16 8320 3/8-16 9100HD 3/8-16 8371 3/8-16 9103EZHD 3/8-16 8372 5/16-18 9145EZHD 3/8-16 8373 5/16-18 9190HD 3/8-16 8700 5/16-18 9190EZHD 3/8-16 8800 5/16-18 8848 3/8-16 8975 3/8-16 B3 Pulls & plates 8102HD 8103HD C D 5 5-1/4" (8111 and 8112 Pulls Only), 5-3/4" (8121) 6 6" (8102HD and 8105 Only) 8 8" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8190HD, 8190EZHD Only) 9 9" (8700 and 8800 Only) 0 10" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8169, 8190HD, 8190EZHD Only) 2 12" (8103HD, 8103EZHD, 8145EZHD, 8169, 8181, 8190HD, 8190EZHD, 8281, 8312, 8371, 8372, 8373, 8700, 8800, 8848, 8975 Only) 18" (8103EZHD, 8145EZHD, 8181, 8190HD, 8190EZHD, 8281, 8371, 8372, 8373, 8700, 8800 Only) 20" (8320 Only) 24 24" (8371, 8372, 8373, 8700, 8800 Only) E 16" (8181 and 8281 Only) Stops 16 18 19-3/16" (8189 Only) Latches, catches & bolts Pull sizes are determined by the center to center distance between the mounting locations. Ex. A 12" pull has 12" between the mounting locations. The overall pull length will be longer. See pull model detailed pages for specific size information. The table below shows standard available sizes for pulls. 19 Flush bolts & coordinators Pulls sizes - center to center 20 Hinges & pivots General information - continued F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B3 General information - continued Custom lengths are available as engineering special, consult customer service. Finishes BHMA Description Substrate US 605 Bright Brass Brass US3 D Latches, catches & bolts 606 Satin Brass Brass US4 612 Satin Bronze Brass US10 613 Oil rubbed Bronze Brass US10B 619 Satin Nickle Brass US15 625 Bright Chrome Brass US26 626 Satin Chrome Brass US26D 626-AM* Satin Chrome - Anti-Microbial Brass US26D-AM 628 Satin Aluminium Aluminium US28 629 Buff Stainless Stainless Steel US32D 629-316 Buff Stainless - 316 Substrate Stainless Steel -316 US32D-316 C Flush bolts & coordinators B4 Pulls & plates A Hinges & pivots Architectural and decorative pulls 630 Satin Stainless Steel Stainless Steel US32D 630-316 Satin Stainless - 316 Substrate Stainless Steel -316 US32D-316 630-AM** Satin Stainless - Anti-Microbial Stainless Steel US32D-AM --- Aged Bronze Stainless Steel 643e/716 --- Matte black Stainless Steel BLK *AM - Antimicrobial finish. The antimicrobial coating is specifically formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, blocking food and slowing the growth of bacteria, mold and mildew. Product with antimicrobial finishes will maintain the products standard warranty for finishes. High traffic, public use areas are ideally suited to antimicrobial coated door hardware. With hundreds or thousands of people accessing these areas every day, safety should be top of mind. Adding door hardware with an antimicrobial coating can make a difference by inhibiting the growth of bacteria on these high-tough surfaces. Applications where antimicrobial coated hardware makes sense include: Healthcare Education Government Food service Childcare Rest rooms ** Recommend using 630-AM Anti-microbial for highly corrosive environmental applications E Stops Custom finishes are available as engineering special, consult customer service. Door thickness G Miscellaneous hardware F Exterior hardware All Ives architectural pulls, push bars, decorative pulls, and long door pulls come standard with mounting hardware for door thickness ranging from 1-1/2" to 1-3/4". Many pulls have optional mounting hardware for 2" and 2.1/4" thick doors or are available as separate part accessories. See detailed pull model pages for availability. Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B4 Ives Architectural hardware products Pull mounting hardware C F Mount - Countersunk holes Flush bolts & coordinators Pull Plate B5 Pull Plate 3/4" Min. Dia. Pulls & plates Standard mount Standard thru-bolt mount with countersunk washers −− Hollow metal and wood door applications (2) Flat head mounting screws, plated to match (2) Countersunk washers, plated to match A Thru-bolt mounts Hinges & pivots Mounting sizes All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. Used with countersunk holes in doors −− Wood door applications (2) Flat head mounting screws, plated to match D Latches, catches & bolts O Mount - Decorative Decorative thru-bolt mount −− Hollow metal and wood door applications (2) Decorative mounting bolts - machine screw, plated to match E Stops 1" Min. Dia. Q Mount - Decorative, glass doors F Exterior hardware Push Side Decorative thru-bolt mount −− Glass door applications (2) Decorative mounting bolts - machine screw, plated to match (2) Metal and vinyl washers G Ives Architectural hardware products Miscellaneous hardware X Mount - Security Security thru-bolt mount with countersunk washers −− Hollow metal and wood door applications (2) Flat head security pin in socket mounting screws, plated to match (2) Countersunk washers, plated to match B5 Mounting sizes All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. Concealed mounts Reinforcing Plate B6 Pulls & plates A Hinges & pivots Pull mounting methods C Flush bolts & coordinators (1)Set screw A Mount - Aluminum doors Concealed mount −− Aluminum door applications (2) Mounting bolts - machine screw (2) Set screws Designed to be used with rivet nuts. Not supplied. Pull Plate G Mount - Pull plate D Latches, catches & bolts Concealed mount with pull plate −− Hollow metal and wood door applications Pull mounts directly onto plate, Plate is attached to door (2) Flat head mounting screws Reinforcing Plate E Stops I Mount - Wood doors F Exterior hardware (1)Set screw Concealed mount −− Wood door applications (2) Mounting bolts - machine screw (2) Set screws Reinforcing Plate G Miscellaneous hardware L Mount - Hollow metal doors (1)Set screw B6 Ives Architectural hardware products Concealed mount −− Hollow metal door applications (2) Mounting bolts - machine screw (2) Set screws Pull mounting methods 3/4" Min. Dia. Pull Side (1)Set screw C Flush bolts & coordinators K Mount - 8121 Pull only Back to back mounting - 8-32 hardware −− Hollow metal and wood door applications (8) Machine screws (4) Mounting sleeves B7 Push Side J Mount - 8102 Pull only Back to back mounting - 5/16-18 hardware −− Hollow metal and wood door applications (2) Mounting bolts - machine screw (2) Set screws Pulls & plates 3/4" Min. Dia. A Back to back mounts Hinges & pivots Mounting sizes All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. D Latches, catches & bolts 1" Dia. 1" Dia. N Mount E (1)Set screw Stops Pull Side Push Side Back to back mounting - 3/8-16 hardware −− Hollow metal and wood door applications (2) Mounting bolts - machine screw (2) Set screws F Exterior hardware 1" Min. Dia. Push Side 1" Min. Dia. Pull Side G Miscellaneous hardware (1)Set screw P Mount - Glass doors Back to back mounting - 3/8-16 hardware −− Glass door applications (2) Mounting bolts - machine screw (2) Set screws (2) Metal and vinyl washers Ives Architectural hardware products B7 A Hinges & pivots Pull mounting methods Mounting All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. Push/Pull combo mounts N Mount Flush bolts & coordinators NO Mount - Decorative Back to back mounting - 3/8-16 hardware (N) & Decorative thru-bolt (O) −− Hollow metal and wood door applications Pushbar to pull −− (1) Mounting bolt - machine screw −− (1) Set screw Free end pushbar and pull −− (2) Decorative mounting bolts - machine screw, plated to match B8 Pulls & plates O Mount C O Mount NS Mount - Standard Latches, catches & bolts STD Mount D N Mount Back to back mounting - 3/8-16 hardware (N) & Standard thru-bolt −− Hollow metal and wood door applications Pushbar to Pull −− (1) Mounting bolt - machine screw −− (1) Set screw Free end pushbar and pull −− (2) Flat head mounting screws, plated to match −− (2) Countersunk washers, plated to match STD Mount PQ Mount - Decorative, glass doors E Stops Q Mount Exterior hardware P Mount G Miscellaneous hardware F Q Mount B8 Ives Architectural hardware products Back to back mounting - 3/8-16 hardware (P) & Decorative thru-bolt (Q) −− Glass door applications Pushbar to pull −− (1) Mounting bolt - machine screw −− (1) Set screw −− (1) Metal and vinyl washers Free end pushbar and pull −− (2) Decorative mounting bolts - machine screw, plated to match −− (2) Metal and vinyl washers Architectural and decorative pulls PR8190EZHD-8 US32D O 1-3/4" Model Center to center Finish Mounting Door thickness PR 8190EZHD 8 US32D N 1-3/4" Single/Pair Single pull machined with standard threads PR Jsgl Pair of pulls - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting (8102 only) Nsgl Single pull machined for back to back mounting Qsgl Single pull machined for back to back mounting (glass doors) B9 Pulls & plates “Blank” Model D 5-1/4" (8111), 5-5/8" (8112), 5-3/4" (8121) 6" (8102HD and 8105 only) 8" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8190HD, 8190EZHD only) 9" (8700 and 8800 Only) 10" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8169, 8190HD, 8190EZHD only) 12" (8103HD, 8103EZHD, 8145EZHD, 8169, 8181, 8190HD, 8190EZHD, 8281, 8312, 8371, 8372, 8373, 8700, 8800, 8848, 8975 only) 16" (8181 and 8281 only) 18" (8103EZHD, 8145EZHD, 8181, 8190HD, 8190EZHD, 8281, 8371, 8372, 8373, 8700, 8800 only) 19" (8189 only) 20" (8320 only) 24" (8371, 8372, 8373, 8700, 8800 only) E Exterior hardware US3 US4 US10 US108 US15 US26 US26D US260-AM US28 US32D US32D-316 US32D US32D-316 US32D-AM ----- F G Miscellaneous hardware Buff Brass Satin Brass Satin Bronze Antique Bronze Satin Nickel Buff Chrome Satin Chrome Satin Chrome - Anti-Microbial Satin Clear Anodized Buff Stainless Buff Stainless - 316 Substrate Satin Stainless Satin Stainless - 316 Substrate Satin Stainless - Anti-Microbial Aged Bronze Matte black Stops 605 606 612 613 619 625 626 626-AM 628 629 629-316 630 630-316 630-AM 643e/716 BLK Latches, catches & bolts 19 20 24 Finish C 16 18 Flush bolts & coordinators 8102HD Straight pull - 3/4" round 8103HD Straight pull - 1" round 8103EZHD Straight pull - 1" round, ADA compliant 8105 Straight Pull - 1" Flattened 8145EZHD 45° Offset pull - 1" round, ADA compliant 8190HD 90° Offset pull - 1" round 8190EZHD 90° Offset pull - 1" round, ADA compliant 8111 Straight pull 8112 Straight pull - surface mount 8121 Straight pull - surface mount 8169 Offset Tubular pull 8181 Offset Georgian pull 8189 Straight Athens pull 8281 Straight Georgian pull 8312 Offset Plymouth pull 8320 Offset Plymouth pull 8371 Straight Addison pull 8372 Straight Camelot pull 8373 Straight Brookshire pull 8376 Straight Brookshire pull 8700 Straight Greenwich pull 8800 Offset Greenwich pull 8848 Straight pull 8975 Straight Rhodes pull Center to center 5 6 8 9 0 2 A Single/Pair Hinges & pivots How to order: Ives Architectural hardware products B9 How to order - continued: PR8190EZHD-8 US32D O 1-3/4" Single/Pair Model Center to center Finish Mounting Door thickness PR 8190EZHD 8 US32D N 1-3/4" Mounting Hardware STD Thru-bolt with decorative washer A Concealed mount - aluminum doors F Thru-bolt with countersunk hole G Concealed mount with pull plates I Concealed mount - wood doors J Back to back mount (8102 only) K Back to back mount (8121 only) L Concealed mount - hollow metal doors N Back to back mount O Decorative thru-bolt P Back to back mount - glass doors Q Decorative thru-bolt - glass doors X Thru-bolt - security screw and decorative washer Door Thickness 1-3/4" Standard 2" Optional 2-1/4" Optional G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B10 Pulls & plates A Hinges & pivots Architectural and decorative pulls B10 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots 8102HD Solid door pull - 3/4" round Available Sizes: 6", 8", 10" A Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Center to center “B” Overall length “C” 8102HD-6 2-1/4" 1-1/2" 6" 6-3/4" 8102HD-8 2-1/4" 1-1/2" 8" 8-3/4" 8102HD-0 2-1/4" 1-1/2" 10" 10-3/4" C Flush bolts & coordinators ROUND Product number B11 3/4" Pulls & plates Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details)F, G, I, J, L Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Finishes Additional information D Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B11 Architectural pulls and push bars Hinges & pivots 8103HD Solid door pull - 1" round A Available Sizes: 8", 10", 12" Certifications Meets ANSI A156.06 Mounting C Flush bolts & coordinators B12 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details)A, F, G, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection “A” Clearance Center to center “B” Overall length “C” 8103HD-8 2-1/2" 1-1/2" 8" 9" 1" 8103HD-0 2-1/2” 1-1/2" 10" 11" ROUND 8103HD-2 2-1/2” 1-1/2" 12" 13" Finishes Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. D Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B12 Ives Architectural hardware products Architectural pulls and push bars A Hinges & pivots 8103EZHD S olid door pull - 1" round Large 2-1/2" clearance for the accessibility applications Available Sizes: 8", 10", 12" Certifications Meets ANSI A156.06 Complies with ADA and barrier free applications Mounting Center to center “B” Overall length “C” 1" 2-1/2” 8" 9" ROUND 8103EZHD-0 3-1/2” 2-1/2” 10" 11" 8103EZHD-2 3-1/2” 2-1/2” 12" 13" Finishes D Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629-316, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C Clearance 3-1/2" Flush bolts & coordinators CLEARANCE Projection “A” 8103EZHD-8 B13 2-1/2" Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B13 Architectural pulls and push bars Hinges & pivots 8105 Solid door pull - 1" flattened A Available Sizes: 8", 10", 12" Certifications Meets ANSI A156.06 Mounting B14 Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C Flush bolts & coordinators 1” FLATTED 1/2 ROUND Product number Projection “A” Clearance Center to center “B” Overall length “C” 8105-6 2" 1-1/2” 6" 6-1/2" 8105-8 2” 1-1/2” 8" 8-1/2" 8105-0 2” 1-1/2” 10" 10-1/2" Finishes Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 630, 630-AM,643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops D Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl pr Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B14 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots 8145EZHD 45° Offset solid door pull Available Sizes: 8", 10", 12", 18" A Certifications Meets ANSI A156.06 Complies with ADA and Barrier Free Applications Mounting Clearance Center to center “B” Overall length “C” Offset "D" 3-1/2" 2-1/2” 8" 9" 2-1/2" 8145EZHD-0 3-1/2" 2-1/2” 10" 11" 2-1/2" 8145EZHD-2 3-1/2" 2-1/2” 12" 13" 2-1/2" 8145EZHD-18 3-1/2" 2-1/2” 18” 19” 2-1/2" Finishes D Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629-316, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C Projection “A” 8145EZHD-8 Flush bolts & coordinators Product number B15 1" ROUND Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B15 Architectural pulls and push bars Hinges & pivots 8190HD 90° Offset solid door pull A Available Sizes: 8", 10", 12", 18" Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B16 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C 1" ROUND Product number Projection “A” Clearance Center to center “B” Overall length “C” Offset "D" 8190HD-8 3-1/4" 2-1/4” 8" 9" 3-1/4" 8190HD-0 3-1/4" 2-1/4” 10" 11" 3-1/4" 8190HD-2 3-1/4" 2-1/4” 12" 13" 3-1/4" 8190HD-18 3-1/4" 2-1/4” 18” 19” 3-1/4" Finishes D Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B16 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots 8190EZHD 90° Offset solid door pull Available Sizes: 8”, 10", 12", 18" A Certifications Meets ANSI A156.06 Complies with ADA and Barrier Free Applications Mounting Center to center “B” Overall length “C” Offset "D" 2-1/2” 8" 9" 3-1/4" 8190EZHD-0 3-1/2" 2-1/2” 10" 11" 3-1/4" 8190EZHD-2 3-1/2" 2-1/2” 12" 13" 3-1/4" 8190EZHD-18 3-1/2" 2-1/2” 18” 19” 3-1/4" Finishes D Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629-316, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C Clearance 3-1/2" Flush bolts & coordinators ROUND Projection “A” 8190EZHD-8 B17 1" Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B17 A Hinges & pivots Architectural pulls and push bars 9100HD Solid push bar Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications Pulls & plates 1” C Flush bolts & coordinators B18 ROUND Meets ANSI A156.06 Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, NO, NS, O, P, PQ, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Projection "A" Clearance Center to center “B” Overall length “C” 2-1/2" 1-1/2" 25-45" Add 1" to CTC length Finishes D Latches, catches & bolts Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Available in 316 Series Stainless Steel, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 629-316, 630, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information Specify PR when ordering a set of push bars for back to back mounting For one back to back machined push bar, specify Nsgl or Psgl (glass doors) Caution G Miscellaneous hardware F Exterior hardware E Stops The length of push bar should not interfere with the door jamb or cause a pinch point B18 Ives Architectural hardware products Architectural pulls and push bars A Hinges & pivots 9103EZHD S olid straight pull/push bar combo (8103EZHD Pull + 9100HD Push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications Mounting CTC Push CTC Pull Projection Push & Pull 25 to 45" 8" 2-1/2" & 3-1/2" 25 to 45" 10" 2-1/2" & 3-1/2" 9103EZHD 25 to 45" 12" 2-1/2" & 3-1/2" Finishes D Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629-316, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Latches, catches & bolts 9103EZHD 9103EZHD C Product number Flush bolts & coordinators Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B19 ROUND Pulls & plates 1" Meets ANSI A156.06 Pull Side complies with ADA and Barrier Free Applications Caution E Stops The length of push bar should not interfere with the door jamb or cause a pinch point F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B19 Hinges & pivots Architectural pulls and push bars A 9145EZHD 4 5° Offset pull/push bar combo (8145HD pull + 9100HD push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications Pulls & plates Meets ANSI A156.06 Pull Side complies with ADA and Barrier Free Applications B20 Mounting 1" C Flush bolts & coordinators ROUND Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Latches, catches & bolts Product number CTC Push CTC Pull Projection Push & Pull 9145EZHD 25 to 45" 8" 2-1/2" & 3-1/2" 9145EZHD 25 to 45" 10" 2-1/2" & 3-1/2" 9145EZHD 25 to 45" 12" 2-1/2" & 3-1/2" 9145EZHD 25 to 45" 18" 2-1/2" & 3-1/2" Finishes D Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629-316, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Caution G Miscellaneous hardware F Exterior hardware E Stops The length of push bar should not interfere with the door jamb or cause a pinch point B20 Ives Architectural hardware products Architectural pulls and push bars A Hinges & pivots 9190HD S olid 90° Offset pull/push bar combo (8190HD pull + 9100HD push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications ROUND CTC Push CTC Pull Projection push & pull 9190EZHD 25 to 45" 8" 2-1/2" & 3-1/2" 10" 2-1/2" & 3-1/2" 12" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 18" 2-1/2" & 3-1/2" Finishes Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. E Stops Caution The length of push bar should not interfere with the door jamb or cause a pinch point D 25 to 45" 25 to 45" Latches, catches & bolts 9190EZHD 9190EZHD C Product number Flush bolts & coordinators Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes Standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B21 Mounting 1" Pulls & plates Meets ANSI A156.06 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B21 Hinges & pivots Architectural pulls and push bars A 9190EZHD S olid 90° Offset pull/push bar combo (8190EZHD pull + 9100HD push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications B22 Pulls & plates Meets ANSI A156.06 Pull Side complies with ADA and Barrier Free Applications 1" C Flush bolts & coordinators ROUND Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) NO, NS, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Latches, catches & bolts Product number CTC Push CTC Pull Projection push & pull 9190EZHD 25 to 45" 8" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 10" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 12" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 18" 2-1/2" & 3-1/2" D Finishes Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629-316, 630-316, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Caution G Miscellaneous hardware F Exterior hardware E Stops The length of push bar should not interfere with the door jamb or cause a pinch point B22 Ives Architectural hardware products Decorative pulls Hinges & pivots 8111-5 Solid door pull Sizes: 5 1/4" A Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Center to center “B” Overall length “C” 8111-5 1-3/16" 1-3/16” 5-1/4" 6-1/4" C D Latches, catches & bolts 1” FLATTED 1/2 ROUND Flush bolts & coordinators Finishes Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 629, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. B23 1" ROUND BASE Product number Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes Standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details)F, G Mounting hardware for other door thicknesses are available as engineering special, consult customer service. 8112-5 Solid door pull Sizes: 5-1/4" Certifications Meets ANSI A156.06 Mounting E Stops 8 x 1" wood screws Surface mount only Product number Projection “A” Clearance Center to center “B” Overall length “C” 8112-5 2-13/16" 1-7/16” 5-5/8" 7-1/2" Finishes F Exterior hardware 1-7/8" SURFACE MOUNTED Available in Brass substrate. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 626, 626-AM Custom finishes are available as engineering special, consult customer service. Miscellaneous hardware 1” FLATTED 1/2 ROUND G Ives Architectural hardware products B23 Decorative pulls Hinges & pivots 8121 Solid door pull A Sizes: 5-3/4" Certifications Meets ANSI A156.06 Mounting B24 Pulls & plates 8-32 x 1" machine screw and #8 x 1" wood screw Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional mounting hardware available (see general information section for details) K Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B C Flush bolts & coordinators 1-1/2” HOSPITAL G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C A B24 Ives Architectural hardware products Product number Projection “A” Clearance Center to center “B” Overall length “C” 8121-5 3-1/2" 1-7/16” 5-3/4" 8-3/4" Finishes Available in Brass substrate. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 626, 626-AM Custom finishes are available as engineering special, consult customer service. Decorative pulls Hinges & pivots 8169 C Style (tubular series) offset solid door pull A 1" Diameter pull bar Available Sizes: 10", 12" Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Offset Center to center “B” Overall length “C” 8169-0 3" 2" 6-1/2" 10 11 8169-2 3" 2" 6-1/2" 12 13 Finishes Additional information D 1" ROUND Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C C Product number Flush bolts & coordinators A B25 B Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B25 Decorative pulls Hinges & pivots 8181 Georgian 90° offset solid door pull A 1" Round pull (Grip Area 1.1/4") Available sizes: 12", 16", 18" Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B26 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C D 2" B Product number Projection “A” Clearance Offset "D" Center to center “B” Overall length “C” 8181-2 3-1/8" 1-7/8" 4" 12" 12-3/4" 8181-16 3-1/8" 1-7/8" 4" 16" 16-3/4" 8181-18 3-1/8" 1-7/8" 4" 18" 18-3/4" Finishes Latches, catches & bolts Available in Aluminum, Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 628, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. D Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B26 Ives Architectural hardware products Decorative pulls Hinges & pivots 8189 Athens offset tubular door pull A 1-1/4" Diameter pull bar with 1-1/4" Diameter mounting posts Available sizes: 19 3/16" Certifications Meets ANSI A156.06 Mounting B C A 3" 3" 1-3/8" 1-3/8" D A C Offset "D" Center to center “B” Overall length “C” 1-3/8" 1-1/2" 19-13/16" 29.5" Finishes Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. D Latches, catches & bolts Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. C US32 Finish US32 Finish B Clearance 2-5/8" Flush bolts & coordinators US32 Finish D US32 Finish Projection “A” 8181-19 B27 Non directional finish typ Non directional finish typ Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B27 Decorative pulls Hinges & pivots 8281 Georgian straight solid door pull A 1" Round pull (grip area 1.1/4") Available sizes: 12", 16", 18" Certifications Meets ANSI A156.06 Mounting B28 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Flush bolts & coordinators 1-7/8" B C C 1-1/4" Latches, catches & bolts 1" Product number Projection “A” Clearance Center to center “B” Overall length “C” 8181-2 3-1/8" 1-7/8" 12" 12-3/4" 8181-16 3-1/8" 1-7/8" 16" 16-3/4" 8181-18 3-1/8" 1-7/8" 18" 18-3/4" Finishes Available in Aluminum, Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 628, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. D Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Qsgl (glass doors) Custom lengths are available as engineering special, consult customer service. B28 Ives Architectural hardware products Decorative pulls Hinges & pivots 8312 Plymouth offset solid door pull A 1-7/16" Max grip diameter Available Sizes: 12" Certifications Meets ANSI A156.06 Mounting 1-3/16" C Clearance 8312-2 3" 1-9/16" Offset "D" Center to center “B” Overall length “C” 1-1/2" 12" 14" Finishes Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. D Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Additional information D C 1-7/16" B 3/ 4" Projection “A” Flush bolts & coordinators 5/ 8" Product number B29 1-7/8" Pulls & plates 3-1/8" 2" A Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B29 Decorative pulls Hinges & pivots 8320 Plymouth offset solid door pull A 1-1/4" Max grip diameter Available Sizes: 20" Certifications Meets ANSI A156.06 Mounting B30 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Flush bolts & coordinators A 3/ 4" Product number Projection “A” Clearance Offset "D" Center to center “B” Overall length “C” 8320-20 3-7/8" 2-5/8" 2-7/8" 20" 22" C Finishes 1-1/4" B C 1-1/4" D Latches, catches & bolts 4-5/8" Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops D Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B30 Ives Architectural hardware products Decorative pulls Hinges & pivots 8371 Addison flat tip straight solid door pull A 1" Round pull with 1-1/4" base mounting posts Available sizes: 12", 18", 24" Certifications Meets ANSI A156.06 Mounting 1" D C Center to center “B” Overall length “C” 8371-2 3-7/16" 2" 12" 16" 8371-18 3-7/16" 2" 18" 22" 8371-24 3-7/16" 2" 24" 28" Finishes A D Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Brass substrate. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C B Clearance Flush bolts & coordinators 2" Projection “A” B31 Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16" mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B31 Decorative pulls Hinges & pivots 8372 Camelot steeple tip straight tubular door pull A 1" Round pull with 2" base mounting posts Available sizes: 12", 18", 24" Certifications Meets ANSI A156.06 B32 Pulls & plates Mounting Flush bolts & coordinators A C 1-7/8" C B 1" D Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection “A” Clearance Center to center “B” Overall length “C” 8372-2 2-7/8" 1-7/8" 12" 17" 8372-18 2-7/8" 1-7/8" 18" 23" 8372-24 2-7/8" 1-7/8" 24" 29" Finishes Latches, catches & bolts Available in Brass substrate. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. D Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. B32 Ives Architectural hardware products Decorative pulls Hinges & pivots 8373 Brookshire acorn tip straight tubular door pull A 1" Round pull with 2" base mounting posts Available sizes: 12", 18", 24" Certifications Meets ANSI A156.06 Mounting 1" Dia. Center to center “B” Overall length “C” 8372-2 3" 1-7/8" 12" 16-5/16" 8372-18 3" 1-7/8" 18" 22-5/16" 8372-24 3" 1-7/8" 24" 28-5/16" Finishes D Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Brass substrate. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C C Clearance Flush bolts & coordinators 1-7/8" B Projection “A” B33 Product number Pulls & plates A Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B33 Decorative pulls Hinges & pivots 8700 Greenwich arc straight solid door pull A 3/4" Round pull Available sizes: 9", 12", 18", 24" Certifications Meets ANSI A156.06 Mounting B34 Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Latches, catches & bolts 1-3/8" C Flush bolts & coordinators A C D B 1" DIA Product number Projection “A” Clearance Center to center “B” Overall length “C” 8700-9 2-3/8" 1-5/8" 9" 12-9/16" 15-9/16" 8700-2 2-3/8" 1-5/8" 12" 8700-18 2-3/8" 1-5/8" 18" 21-9/16" 8700-24 2-3/8" 1-5/8" 24" 27-9/16" Finishes Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. B34 Ives Architectural hardware products Decorative pulls Hinges & pivots 8800 Greenwich arc offset solid door pull A 3/4" Round pull Available sizes: 9", 12", 18", 24" Certifications Meets ANSI A156.06 Mounting Offset "D" Center to center “B” Overall length “C” 1-3/8" 1" 9" 12-9/16" 15-9/16" 8800-2 2-1/8" 1-3/8" 1" 12" 8800-18 2-1/8" 1-3/8" 1" 18" 21-9/16" 8800-24 2-1/8" 1-3/8" 1" 24" 27-9/16" Finishes D Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. C B Clearance 2-1/8" Flush bolts & coordinators C Projection “A” 8800-9 B35 3/4" DIA Product number Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. A E Stops D F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B35 Decorative pulls Hinges & pivots 8848 Latitude straight solid door pull A 1" Round pull with 2" Round black mounting posts Available sizes: 12" Certifications Meets ANSI A156.06 2" C Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C Flush bolts & coordinators B36 Pulls & plates B 2" C 2" Latches, catches & bolts Clearance Center to center “B” Overall length “C” 8848-2 2-1/2" 1-1/2" 12" 17" Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 613, 619, 625, 626, 630, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information 1" D Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. 1-1/2" A E Stops 2" G Miscellaneous hardware F Exterior hardware 1" B36 Projection “A” 1-1/2" Finishes A B Product number Ives Architectural hardware products Decorative pulls Hinges & pivots 8975 Rhodes straight solid door pull A 1-1/4" X 1/2" Flat pull with 3/4" round mounting posts Available sizes: 12" Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Center to center “B” Overall length “C” 8975-2 2-1/4" 1-3/4" 12" 18" B Available in Aluminum substrate. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 628 Custom finishes are available as engineering special, consult customer service. 1-3/4" D A Latches, catches & bolts Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl (glass doors) Custom lengths are available as engineering special, consult customer service. C Finishes C Flush bolts & coordinators Product number B37 1/2" Pulls & plates 1-1/4" Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B37 How to order: PR9264F 72-56 US32D P 1/2" Single/Pair Model Length Center to center Finish PR 9264F 72 56 US32D A Hinges & pivots Long door pulls Single/Pair “Blank” Single pull machined with standard threads PR Pair of pulls - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting 12 12" 18 18" 24 24" 36 36" 72 72" Center to Center 8 8" 12 12" 18 18" 20 20" 56 56" Finish Single pull machined for back to back mounting (glass doors) Model 9264 9264F 9266 9266F Length Offset long door pull, rounded tips Offset long door pull, flat tips Straight long door pull, rounded tips Straight long door pull, flat tips 605 Buff Brass US3 606 Satin Brass US4 613 Antique Bronze US108 619 Satin Nickel US15 629-316 Buff Stainless - 316 Substrate US32D-316 630-316 Satin Stainless - 316 Substrate US32D-316 643e/716 Aged Bronze --BLK Matte black --Mounting hardware STD Thru-bolt with decorative washer A Concealed mount - aluminum doors I Concealed mount - wood doors L Concealed mount - hollow metal doors N Back to back mount O Decorative thru-bolt P Back to back mount - glass doors Q Decorative thru-bolt - glass doors X Thru-bolt - security screw and decorative washer MB Additional mounting bracket (centered) Door thickness 1-3/4" Standard 2" Optional 2-1/4" Optional G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C B38 Pulls & plates Qsgl Flush bolts & coordinators Nsgl B38 Ives Architectural hardware products Mounting Door thickness P 1/2" Long door pulls 1-1/4" Diameter tubular bar Round tip is standard Optional flat Tip (F) is available. Specify F after model number when ordering. Available in whole 1" increments from 12" to 96" Other lengths available as engineering special, consult customer service. A Hinges & pivots 9264 Offset long door pull, rounded tip 9266 Straight long door pull, rounded tip Certifications Meets ANSI A156.06 C 9266 Straight long door pull Flush bolts & coordinators Product number B39 Standard lengths Pulls & plates Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Offset Overall Length 1-1/2" 3-5/8" 72" CTC 56" 9264-36-20 2-3/4" 1-1/2" 3-5/8" 36" 20" 9264-24-18 2-3/4" 1-1/2" 3-5/8" 24" 18" 9264-18-12 2-3/4" 1-1/2" 3-5/8" 18" 12" 9264-12-8 2-3/4" 1-1/2" 3-5/8" 12" 8" 9266-72-56 2-3/4" 1-1/2" — 72" 56" 9266-36-20 2-3/4" 1-1/2" — 36" 20" 9266-24-18 2-3/4" 1-1/2" — 24" 18" 9266-18-12 2-3/4" 1-1/2" — 18" 12" 9266-12-8 2-3/4" 1-1/2" — 12" 8" D Clearance 2-3/4" Latches, catches & bolts Projection 9264-72-56 Finishes Ives Architectural hardware products G Note: A middle position bracket is required for pulls over 8 feet. Miscellaneous hardware Caution Recommend the length of the ladder pull should not exceed 4" less than the door height F Flat tip (F Option) Exterior hardware Round tip (Standard) E Additional information If not specified, standard center to center length for pulls 36" or longer is 16" less than total pull length (8" from each end of the pull). Center to center length must be specified for lengths less than 36". −− Ex. 72" Long pull has a 56" Center to Center If the center to center length is less than half the total pull length, consult customer service. Specify PR when ordering a set of push bars for back to back mounting For one back to back machined push bar, specify Nsgl or Psgl (glass doors) Additional mounting post required for lengths greater than 96". Mid posts are optional for other lengths. Specify mid post location when ordering. Stops 9624 Offset bracket Available in Brass and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Standard finishes available; 605, 606, 613, 619, 629-316, 630-316, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. B39 How to order: PR8303-8 US32D 4X16 N 1-3/4" Single/Pair Model PR 8303 A Hinges & pivots Push and pull plates Single/Pair “Blank” Single pull machined with standard threads PR Pair of pulls and plates - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting Model 8200 Push Plate 8300 Pull plate (less pull) 8302 Pull plate (with 8102 pull) 8303 Pull plate (with 8103 pull) 8305 Pull plate (with 8105 pull) 8311 Pull plate (with 8111 pull) Pull center to center 5 6 8 0 2 Finish 5-1/4" (8111 only) 6" (8102HD and 8105 only) 8" (8102HD, 8103HD, 8105 only) 10" (8102HD, 8103HD, 8105 only) 12" (8103HD only) 605 Buff Brass 606 Satin Brass 612 Satin Bronze 613 Antique Bronze 619 Satin Nickel 625 Buff Chrome 626 Satin Chrome 626-AM Satin Chrome - Anti-Microbial 628 Satin Clear Anodized 629 Buff Stainless 630 Satin Stainless 630-AM Satin Stainless - Anti-Microbial 643e/716 Aged Bronze BLK Matte black Plate width x height 3X12 3" Wide X 12" High 3.5X15 3-1/2" Wide X 15" High 4X16 4" Wide X 16" High 6X16 6" Wide X 16" High 8X16 8" Wide X 16" High Mounting hardware STD Thru-bolt with decorative washer A Concealed mount - aluminum doors F Thru-bolt with countersunk hole G Concealed mount with pull plates I Concealed mount - wood doors J Back to back mount (8102 only) L Concealed mount - hollow metal doors N Back to back mount Door thickness 1-3/4" Standard 2" Optional 2-1/4" Optional G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B40 Pulls & plates Nsgl B40 Ives Architectural hardware products US3 US4 US10 US108 US15 US26 US26D US260-AM US28 US32D US32D US32D-AM ----- Center to center Finish 8 US32D Plate W X H Mounting Door thickness 4 X 16 N 1-3/4" Push and pull plates A Hinges & pivots 8200 Push plate 8300 Pull plate, prep for pull (less pull) Certifications Meets ANSI A156.6 for J301 Materials Mounting B41 Pulls & plates Standard mounting package −− #6X5/8 oval head screws Optional TEK/TORX package −− #6X5/8 Self-drilling, Self-tapping screws −− #6X5/8 Torx screws Widths and heights 3" X 12" 3-1/2" X 15" 4" X 16" 6" X 16" 8" X 16" Optional pull center to center spacing For plates up to 4" 2” 2” CFC CFT 2” 2” 2” 2” Additional information CFC CFT Specify PR when ordering a set of plates for back to back mounting Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. D For plates greater than 4" (RH shown) Latches, catches & bolts Finishes Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 630, 630-AM, BLK Custom finishes are available as engineering special, consult customer service. C For 8300 pull plates, plates are prepped with 2 3/8" holes for pull machining For holes prepped for G mounting hardware, consult customer service. −− 5-1/4” −− 6” −− 8” −− 10” −− 12” Flush bolts & coordinators Plates cut for cylinder or thumbturns E Stops Plates are available with cutout for cylinder or thumbturn; standard cutout is 2” from top and centered on plates up to 4” wide. For plates wider than 4” cutout is located 2” from outer edge, specify LH or RH. When pull location interferes with standard cutout location a detail drawing should be furnished with the order. Standard cutout is 1-1/4” for cylinder and 3/8” for thumbturn. Specify CFC for cutout for cylinder or CFT for cutout for thumbturn. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B41 Push and pull plates Hinges & pivots 8302 Pull plate A Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B42 Pulls & plates Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, G, I, J, L Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate −− #6 X 5/8 oval head screws Optional TEK/TORX package −− #6 X 5/8 Self-drilling, Self-tapping screws and −− #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 6", 8", or 10" center to center C Widths and heights 3/4" Latches, catches & bolts ROUND 3-1/2" X 15" 4" X 16" 6" X 16 Pull center to center 6" 8" 10" D Finishes Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. B42 Ives Architectural hardware products Push and pull plates A Certifications Meets ANSI A156.06 Mounting 1" C Flush bolts & coordinators Widths and heights B43 Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, G, I, L, N Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate −− #6 X 5/8 oval head screws Optional TEK/TORX package −− #6 X 5/8 Self-drilling, Self-tapping screws and −− #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 8" or 10" center to center Pulls & plates ROUND Hinges & pivots 8303 Pull plate 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center Finishes D Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Latches, catches & bolts 8" 10" Additional information E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B43 Push and pull plates Hinges & pivots 8305 Pull plate A Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B44 Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate −− #6 X 5/8 oval head screws Optional TEK/TORX package −− #6 X 5/8 Self-drilling, Self-tapping screws and −− #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 6", 8", or 10" center to center C Widths and heights 1” FLATTED 1/2 ROUND 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center Latches, catches & bolts 6" 8" 10" D Finishes Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. B44 Ives Architectural hardware products Push and pull plates A Certifications Meets ANSI A156.06 Mounting C Flush bolts & coordinators Pull center to center 5-1/4" Additional information Specify PR when ordering a set of pulls for back to back mounting Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. D Available in Aluminum, Brass, and Stainless Steel substrates. See general information section for specific BHMA finish code, finish description, US finish code, and substrate information. Standard finishes available; 605, 606, 612, 613, 619, 625, 626, 626-AM, 628, 630, 630-AM, 643e/716, BLK Custom finishes are available as engineering special, consult customer service. Latches, catches & bolts Finishes 1” FLATTED 1/2 ROUND B45 Widths and heights 3-1/2" X 15" 4" X 16" 6" X 16" Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with thru-bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, G Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate −− #6 X 5/8 oval head screws Optional TEK/TORX package −− #6 X 5/8 Self-drilling, Self-tapping screws and −− #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 5-1/4" center to center 1” ROUND BASE Hinges & pivots 8311 Pull plate E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B45 Types of protection plates A Hinges & pivots Protection plates Mop plates B46 Pulls & plates Protect the bottom of the pull side of door subject to cleaning and mopping procedures. Size Ranges: 4” to 6” high, 22” to 48” wide Kick plates Flush bolts & coordinators Protect the bottom of the push side of doors subject to scuffing from foot traffic. Recommended for all doors subject to normal use (especially doors using a closer). Size Ranges: 8” to 24” high, 22” to 48” wide C Stretcher plates Latches, catches & bolts Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment. Usually applied to push side of doors. Specify “B4E” Option for beveled edges. Size Ranges: 6” to 8” high, 22” to 48” wide D Armor plates G Miscellaneous hardware F Exterior hardware E Stops Protect lower half of doors from abuse by hard carts, trucks and rough usage. Usually applied to push side of single doors and both sides of double acting doors. Size Ranges: 26” to 48” high, 22” to 48” wide B46 Ives Architectural hardware products Protection plates A Door protection plates are available in .050" thick brass, stainless steel or aluminum; and 1/8" thick high impact polyethylene in clear or black. All plates, metal and plastic, come standard with four beveled edges and countersunk mounting holes (B-CS). Protection plates must be ordered in 1/2" increments. Available in other sizes, consult customer service For 8402 UL Plates, UL mark appears in upper right corner. Not available on plastic protection plates. Hinges & pivots 8400 Commercial protection plates 8402 UL Commercial protection plates Certifications B47 Pulls & plates Meets ANSI A156.6 for J301 UL protection plates certified to UL10C Mounting Flush bolts & coordinators Standard mounting package, 16 per pack −− #6 X 5/8 oval head screws Optional TEK/TORX package, specify TK-TX −− #6 X 5/8 Self-drilling, Self-tapping screws −− #6 X 5/8 Torx screws Finishes BHMA Description Substrate Finish Max sizes 605 Bright Brass 606 Satin Brass Brass US3 24"X48" Brass US4 24"X48" Satin Bronze Brass US10 24"X48" Oil rubbed Bronze Brass US10B 36"X48" 619 Satin Nickel Brass US15 24"X48" Bright Chrome Brass US26 36"X48" Satin Chrome Brass US26D 24"X48" 628 Satin Aluminium Aluminium US28 48"X48" Number of screw packs required by plate size (specify TEK Screws or TORK screws) D 625 626 22”-25” 26”-33” 34”-41” 42”-48” Stainless Steel US32 48"X48" 4”-8” 1 1 1 1 Satin Stainless Steel Stainless Steel US32D 48"X48" 9”-16” 1 1 1 1 654 Satin Stainless Steel Stainless Steel US32D 48"X48" 17”-24” 1 1 1 2 BLK Matte black Stainless Steel BLK 24"X48" 25”-32” 1 1 2 2 1 2 2 2 2 2 2 2 P-BLK Black Plastic P-BLK 48"X48" CLR Clear Plastic CLR 48"X48" 41”-48” E Bright Stainless Steel Stops 629 630 33”-40” Latches, catches & bolts 612 613 C Aluminum 5005 Series, Brass C26800 Series, Stainless Steel 300 Series, Plastic Custom finishes are available as engineering special, consult customer service. Available options Available accessory Gasket tape kit tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8" x 34" kickplate. Order 8401 gasket tape. F Specify B-NH for no mounting holes. (Not available on 8402. Available only with US32D, US32, US3, US4, US28, Clear, Black only) Specify B-NHA for no mounting holes with adhesive. Specify ERS prepped with extra row of screws. Special Cut-outs are available as engineering special, consult customer service. Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B47 Vandal resistant trim A Hinges & pivots VR810-DT with black grip VR814-DT without black grip Size 11 Gauge(0.120" thick) Mounting B48 Pulls & plates For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size. Product number Width Height Thru-bolt pattern (4 holes) Clearance grip to door Projection VR810DT 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" Finishes VR814 G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators VR810 B48 Ives Architectural hardware products Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. Custom finishes are available as engineering special, consult customer service. Vandal resistant trim with black grip with black grip without black grip without black grip A Hinges & pivots VR810-NL LHR VR810-NL RHR VR814-NL LHR VR814-NL RHR Size 11 Gauge(0.120" thick) Mounting For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Height Thru-bolt pattern (4 holes) Clearance grip to door Projection VR810NL 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" B49 Width Pulls & plates Product number Finishes C Additional information Flush bolts & coordinators Available in Stainless steel US32D 304 Series Stainless steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service D Latches, catches & bolts 1-5/8" cylinder hole cut-out, located 1-13/16 above horizontal center line and centered between mounting studs on vertical center line Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Protective cylinder collar spins to reduce damage from pipe wrench or other tool Comes with cylinder cup E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B49 Vandal resistant trim A Hinges & pivots VR810-NL-V with black grip VR814-NL-V without black grip For use with Falcon 25-R or 25-V Series exit devices Thru-bolts direct to the exit device Night latch operation (cylinder not furnished) Non-handed, horizontal keyway Size 11 Gauge(0.120" thick) Pulls & plates Mounting B50 For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Product number Width Height Thru-bolt pattern (4 holes) Clearance grip to door Projection VR810NL-V 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" Finishes C Flush bolts & coordinators Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service Additional information G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts 1-5/8" cylinder hole cut-out, located 1-13/16 above horizontal center line and centered between mounting studs on vertical center line Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Protective cylinder collar spins to reduce damage from pipe wrench or other tool. Comes with cylinder cup B50 Ives Architectural hardware products Vandal resistant trim A with black grip with black grip without black grip without black grip Hinges & pivots VR900 RHR VR900 LHR VR904 RHR VR904 LHR For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim. Built-in lock protector prevents tampering on certain models. Handed design allows trim to be positioned to coordinate with the centerline of inside hardware. B51 Pulls & plates Size 11 Gauge(0.120" thick) Mounting For door thickness 1-3/4-2-1/4". 1/4-20 X 1-1/4" and 1/4-20 X 1-3/4" mounting screws with countersunk washers Height Thru-bolt pattern (4 holes) Clearance grip to door Projection 7-1/4" 11" 2" wide x 10" high 1-1/2" 1-7/8" Finishes D Latches, catches & bolts Additional information 1-1/2" cylinder hole cut-out, located 2-7/32 above horizontal center Line and 1/4" offset from vertical center line towards the hinge side of the door. Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied. Protective cylinder collar spins to reduce damage from pipe wrench or other tool. Comes with cylinder cup Additional cut-outs and locations are available as engineering special, consult customer service. C Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. Custom finishes are available as engineering special, consult customer service. Flush bolts & coordinators Width E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B51 Vandal resistant trim A Hinges & pivots VR900LLP RH VR900LLP LH VR904LLP RH VR904LLP LH with black grip with black grip without black grip without black grip For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim Handed design allows trim to be positioned to coordinate with the centerline of inside hardware Pulls & plates Size B52 11 Gauge(0.120" thick) Mounting Flush bolts & coordinators For door thickness 1-3/4-2-1/4". 1/4-20 X 1-1/4" and 1/4-20 X 1-3/4" mounting screws with countersunk washers Width Height Thru-bolt pattern (4 holes) Clearance grip to door Projection 5-1/4" 11" 1-3/4" wide x 10" high 1-1/2" 1-7/8" Finishes C Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service Additional information G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts 1-1/2" cylinder hole cut-out, located 2-7/32 above Horizontal center line and 1/4" offset from vertical center line towards the hinge side of the door Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied. Protective cylinder collar spins to reduce damage from pipe wrench or other tool Comes with cylinder cup Additional cut-outs and locations are available as engineering special, consult customer service B52 Ives Architectural hardware products Vandal resistant trim A Hinges & pivots VR910-DT with black grip VR914-DT without black grip For use with Von Duprin 98/99 Series rim and vertical rod exit device Thru-bolts direct to the exit device Pull operation only Non-handed Size 11 Gauge (0.120" thick) Height Thru-bolt pattern (4 holes) Clearance grip to door Projection 5-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" B53 Width Pulls & plates Mounting For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Finishes C Flush bolts & coordinators Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B53 Vandal resistant trim A Hinges & pivots VR910-NL with black grip VR914-NL without black grip For use with Von Duprin 98/99 Series rim and vertical rod exit device Thru-bolts direct to the exit device Non-handed, horizontal keyway Size 11 Gauge(0.120" thick) Mounting B54 Pulls & plates For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Width Height Thru-bolt pattern (4 holes) Clearance grip to door Projection 5-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" Finishes Flush bolts & coordinators Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service C Additional information G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts 1-5/8" cylinder hole cut-out,centered on horizontal center line and 1/4" offset from vertical center line towards the lock side of the door Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Protective cylinder collar spins to reduce damage from pipe wrench or other tool. Comes with cylinder cup Additional cut-outs and locations are available as engineering special, consult customer service B54 Ives Architectural hardware products Vandal resistant trim A Hinges & pivots VR910M-DT with black grip VR914M-DT without black grip For use with Von Duprin 9875/9975 mortise lock exit device Built-in lock protector prevents tampering on certain models. Thru-bolts direct to the exit device Non-handed Size 11 Gauge(0.120" thick) Height Thru-bolt pattern (4 holes) Clearance grip to door Projection 7-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" B55 Width Pulls & plates Mounting For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Finishes C Flush bolts & coordinators Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B55 Vandal resistant trim A Hinges & pivots VR910M-NL RHR VR910M-NL LHR VR914M-NL RHR VR914M-NL LHR Pulls & plates with black grip with black grip without black grip without black grip For use with Von Duprin 9875/9975 mortise lock exit device Night latch operation (cylinder not furnished) Built-in lock protector prevents tampering on certain models. Thru-bolts direct to the exit device Non-handed, horizontal keyway B56 Size 11 Gauge(0.120" thick) Mounting Flush bolts & coordinators For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Width Height Thru-bolt pattern (4 holes) Clearance grip to door Projection 7-1/4" 11" 1-3/4" wide x 10" high 1-1/2" 1-7/8" Finishes C Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. Custom finishes are available as engineering special, consult customer service. Additional information G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts 1-5/8" cylinder hole cut-out,centered on horizontal center line and 1/4" offset from vertical center line towards the lock side of the door Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied. Protective cylinder collar spins to reduce damage from pipe wrench or other tool. Comes with cylinder cup Additional cut-outs and locations are available as engineering special, consult customer service. B56 Ives Architectural hardware products Flush pulls Certifications A Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Extra deep recess and reverse tapered grip provide for ease of pulling and gripping. Packaged with fasteners for wood applications Hinges & pivots 22 Flush pull - rectangle Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Made from wrought brass. Finish Brass B3 609 Satin brass Brass B5 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions 1-5/16" High x 3-1/8" Wide x 7/16" Deep C 0.22" Substrate Bright brass Flush bolts & coordinators 2.375" Max. Description 605 B57 1-3/16" 2-7/16" BHMA Pulls & plates Finishes Latches, catches & bolts 0.44" D 0.875" 0.656" Ref. Ref. 0.72" 0.97" 0.15" R Max. 218 Flush pull - small circle Ideal for use on sliding doors. Easy installation. Packaged 4 per bag E Stops Certifications Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Made from wrought brass. Finishes 0.775" 0.0156 R" 0.770" Finish Brass B3 609 Satin brass Brass B5 612 Satin bronze Brass B10 B10B 613 Oil rubbed bronze Brass 619 Satin nickel Brass B15 622 Matte black Brass B-BLK Bright chrome Brass B26 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions Inside cup diameter: 3/4" Overall diameter: 1" Depth: 3/8" Ives Architectural hardware products G 625 626 Miscellaneous hardware 0.340" 0.278" Substrate Bright brass F 0.062" Description 605 Exterior hardware 1" BHMA B57 Flush pulls Hinges & pivots 221 Flush pull - large circle A Ideal for use on sliding doors. Built-in prong design eliminates the need for screws or brads and facilitates installation. Packed with two escutcheon pins for added holding power. Certifications Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Pulls & plates Made from wrought brass. Flush bolts & coordinators B58 Finishes C 2-7/16" 2-7/16" 13/32" 2-1/8" BHMA Description Substrate Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Latches, catches & bolts Dimensions D Inside cup diameter: 2-1/8" Overall diameter: 2-7/16" Depth: 7/16" 222 Flush pull - rectangle Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Reverse tapered grip provide for ease of pulling. Certifications E Stops Meets ANSI/BHMA 156.9 B12201 and A156.14 D1781 Material substrate Made from cast brass. Exterior hardware Finishes F 1-5/16" 3-1/8" Miscellaneous hardware Pull body G Back plate 2-15/16" BHMA Description Substrate Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions 3-1/8" high x 1-5/16" wide x 15/32" deep 9/64" B58 3/8" 1" Ives Architectural hardware products Flush pulls Certifications Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 A Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Packaged with fasteners for wood applications Hinges & pivots 223 Flush pull - oval Material Substrate Made from wrought brass. Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions 3-9/16" high x 1-5/16" wide x 14/32" deep Latches, catches & bolts 1-5/16" 7/8" C 13/32" Substrate Flush bolts & coordinators 3-9/16" Description B59 1-5/16 " BHMA Pulls & plates Finishes 3/64 R" D 227 Flush pull - deep well Contoured for ease of pulling. Extra deep well. Packaged with fasteners for wood applications Certifications E Stops Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Made from wrought brass. Finishes 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B Satin nickel Brass B15 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 1/4" 3-5/8" high x 1-3/4" wide x 9/16" deep G 619 622 Dimensions 1-3/4" 1/4" Finish Miscellaneous hardware 17/32" Substrate F 3-5/8" Description Exterior hardware 1-3/4" BHMA 17/32" 1-7/16" Ives Architectural hardware products B59 Decorative flush pulls Hinges & pivots 919 Decorative flush pull - oval A Contoured for ease of pulling. Packaged with fasteners for wood applications. Surface #6 X 3/4" OH PH Certifications Meets ANSI/BHMA 156.9 and A156.14 Material substrate Made from brass. Pulls & plates Finishes B60 BHMA 1-19/32” 4-1/4” C Flush bolts & coordinators 4-23/32” 1-3/32” 3-3/4” 15/32” Description Substrate Finish 605 Bright brass Brass 605 613 Oil rubbed bronze Brass 613 619 Satin nickel Brass 619 622 Matte black Brass B-BLK 625 Bright chrome Brass 625 626 Satin chrome Brass 626 — Aged bronze Brass B-643e/716 Dimensions Latches, catches & bolts 4-23/32" high x 1-19/22" wide x 15/32" deep D 950 Decorative flush pull - rectangle Features a finger pocket for ease of pulling. Packaged with fasteners for wood applications. Concealed #6 X 3/4" OH PH Certifications Meets ANSI/BHMA A156.9 and A156.14 Material substrate E Stops Made from brass. Finishes F Exterior hardware BHMA Description Bright brass Brass 605 613 Oil rubbed bronze Brass 613 619 Satin nickel Brass 619 622 Matte black Brass B-BLK 625 Bright chrome Brass 625 626 Satin chrome Brass 626 — Aged bronze Brass B-643e/716 Dimensions G Miscellaneous hardware Ives Architectural hardware products Finish 605 3-3/4" high x 2-7/8" wide x 11/16" deep B60 Substrate Decorative flush pulls Certifications Meets ANSI/BHMA 156.9 and A156.14 A Features a finger pocket for ease of pulling. Packaged with fasteners for wood applications. Exposed #6 X 3/4" FH PH Hinges & pivots 955 Decorative flush pull - square, deep well Material substrate Made from brass. Description Substrate Finish 605 Bright brass Brass 605 613 Oil rubbed bronze Brass 613 619 Satin nickel Brass 619 622 Matte black Brass B-BLK Brass 625 Satin chrome Brass 626 — Aged bronze Brass B-643e/716 Dimensions 4-5/8" high x 3-29/32" wide x 1-3/16" deep C Bright chrome Flush bolts & coordinators 625 626 B61 BHMA Pulls & plates Finishes D Latches, catches & bolts 960 Decorative flush pull - rectangle, narrow Features a finger pocket for ease of pulling. Packaged with fasteners for wood applications. Concealed #6 X 3/4" OH PH Certifications Meets ANSI/BHMA A156.9 and A156.14 Material substrate Made from brass. E Stops Finishes Description Substrate Finish 605 Bright brass Brass 605 613 Oil rubbed bronze Brass 613 619 Satin nickel Brass 619 B-BLK Matte black Brass Bright chrome Brass 625 626 Satin chrome Brass 626 — Aged bronze Brass B-643e/716 F 622 625 Exterior hardware BHMA Dimensions 3-1/16" high x 1-7/8" wide x 9/16" deep G Miscellaneous hardware Ives Architectural hardware products B61 Decorative flush pulls Hinges & pivots 962 Decorative flush pull - rectangle A Features a finger pocket for ease of pulling. Black painted finger pocket Packaged with fasteners for wood applications. Concealed #8 X 3/4" OH PH Certifications Meets ANSI/BHMA A156.9 and A156.14 Material substrate Pulls & plates Made from brass. B62 Finishes 2 7/16" 13/16" A 1 3/8" 1/4" B 1/8" 9/32" 3 3/8" Flush bolts & coordinators 3 15/16" Description Substrate Finish 605 Bright brass Brass 605 613 Oil rubbed bronze Brass 613 619 Satin nickel Brass 619 B-BLK 3 11/16" 9/32" 1/8" C A BHMA 622 Matte black Brass 625 Bright chrome Brass 625 626 Satin chrome Brass 626 — Aged bronze Brass B-643e/716 Dimensions G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts 3-15/16" high x 2-7/16" wide x 19/32" deep B62 Ives Architectural hardware products Sliding door pulls Certifications A 3/4" width allows installation on narrow as well as standard doors. Spring automatically returns lever flush with plate. Packaged with fasteners for wood applications Hinges & pivots 230 Sliding door edge pull Meets ANSI/BHMA 156.14 D2801 Material substrate Made from solid brass. Description Substrate Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 Satin bronze Brass B10 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 Matte black Brass B-BLK Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Latches, catches & bolts Dimensions C 622 625 Flush bolts & coordinators 612 613 B63 BHMA Pulls & plates Finishes 3-7/8" high x 3/4" wide D 42 Pocket sliding door bolt Exclusive Ives design permits emergency release of bolt from outside the door. Spring activated design allows feather-touch action. Brass grommet supplied to cap release hole, protecting the door’s finish. Packaged with fasteners for wood applications Stops E Material substrate Made from wrought brass. Finishes BHMA Description Substrate Finish Brass B3 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK Brass B26 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions Overall size plate: 3-1/16" high x 1-5/32" wide Strike: 1" high x 3/4" wide Depth of mortise: 5/8" Ives Architectural hardware products G Bright chrome Miscellaneous hardware 625 626 F Bright brass Exterior hardware 605 606 B63 Sliding door pulls Hinges & pivots 990 Sliding door pull A Fits doors 1-3/8" to 1-1/2". Decorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Packaged with fasteners for wood applications Material substrate Body and strike made from solid brass. Pulls & plates Finishes Latches, catches & bolts C Flush bolts & coordinators B64 BHMA Description Substrate 666 Bright brass Aluminum A3 --- Blackened brass Aluminum A5 669 Bright nickel Aluminum A14 670 Satin Nickel Aluminum A15 702 Satin chrome Aluminum A26D A-643e/716 --- Aged Bronze Aluminum 605 Bright brass Brass B3 613 Oil rubbed bronze Brass B613 619 Satin Nickel Brass B619 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D --- Aged Bronze Brass B-643e/716 Dimensions G Miscellaneous hardware F Exterior hardware E Stops D 1-3/4" D x 2-1/4" H B64 Ives Architectural hardware products Finish Sliding door pulls Fits doors 1-3/8" to 1-1/2". Decorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Packaged with fasteners for wood applications A Hinges & pivots 991 Sliding door pull - privacy Material substrate Body and strike made from solid brass. Finishes Description Substrate Finish Aluminum A3 Blackened brass Aluminum A5 669 Bright nickel Aluminum A14 670 Satin Nickel Aluminum A15 702 Satin chrome Aluminum A26D A-643e/716 Aged Bronze Aluminum Bright brass Brass B3 613 Oil rubbed bronze Brass B613 619 Satin Nickel Brass B619 622 Matte black Brass B-BLK Bright chrome Brass B26 Satin chrome Brass B26D --- Aged Bronze Brass B-643e/716 Dimensions D 1-3/4" D x 2-1/4" H Latches, catches & bolts 625 626 C --605 Flush bolts & coordinators Bright brass --- B65 666 Pulls & plates BHMA Screen door pull E Stops 25 Screen door pull Also used as a window lift, drawer or utility pull Packed with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L12231 Exterior hardware Material Substrate Cast aluminum F Dimensions Length 4-7/8" Projection 1-5/32" Mounting holes 4-1/8" center to center Description Substrate Finish 666 673 ----- Bright brass Aluminum clear coat Matte black White Aluminum Aluminum Aluminum Aluminum A3 A92 A-BLK A-W For other colors, consult factory. Ives Architectural hardware products G BHMA Miscellaneous hardware Finishes B65 G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B66 Pulls & plates A Hinges & pivots Notes B66 Ives Architectural hardware products Flush bolts and coordinators FB31P Top and bottom bolts (pair)....................................................................................... C2 FB31T Top bolt only................................................................................................................... C2 FB31B Bottom bolt only............................................................................................................ C2 FB32 Top bolt with auxiliary fire latch................................................................................... C3 FB33 Top bolt with auxiliary fire latch and retrofit plate................................................. C3 Constant latching flush bolts – Metal doors FB61P Top and bottom bolts (pair).......................................................................................C8 FB61T Top bolt only...................................................................................................................C8 FB62 Top bolt with auxiliary fire latch..................................................................................C9 COR Bar coodinators................................................................................................................ C19 Coordinators – Filler bars FL Filler bars.............................................................................................................................. C20 Coordinators – Mounting brackets MB1 and MB2 Mounting brackets...........................................................................................C21 MB1F, MB2F and MB3F Fire rated mounting brackets....................................................C22 MB1V, MB2V and MB3V...........................................................................................................C22 Coordinators – Gravity coordinators COR7G and COR9G Gravity coordinators.............................................................................C23 Coordinators - Carry bar CB1 Carry Bar..............................................................................................................................C24 C1 Constant latching flush bolts – Wood doors Coordinators – Bar coordinators Flush bolts & coordinators FB51P Top and bottom bolts (pair).......................................................................................C6 FB51T Top bolt only...................................................................................................................C6 FB52 Top bolt with auxiliary fire latch.................................................................................. C7 FB53 Top bolt with auxiliary fire latch and retrofit plate................................................. C7 DP1 Dust proof strike - round face plate............................................................................. C16 DP2 Dust proof strike - rectangular face plate.................................................................. C16 How to order COR and accessories........................................................................................C17 B FB41P Top and bottom bolts (pair).......................................................................................C4 FB41T Top bolt only...................................................................................................................C4 FB41B Bottom bolt only............................................................................................................C4 FB42 Top bolt with auxiliary fire latch..................................................................................C5 Dust proof strikes Pulls &plates Automatic flush bolts – Wood doors A Automatic flush bolts – Metal doors Hinges & pivots Table of contents Manual flush bolts Latches, catches & bolts 261 Flush bolt - 4"..................................................................................................................... C10 262 Flush bolt - 6" square end................................................................................................C11 265 Flush bolt - 6" round end.................................................................................................C12 D Manual flush bolts – Wood doors FB358 Top or bottom bolts.....................................................................................................C13 Manual flush bolts – Metal doors FB457 Top or bottom bolts.................................................................................................... C14 FB458 Top or bottom bolts....................................................................................................C15 E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C1 Automatic flush bolts – Metal doors A Hinges & pivots FB31P Top and bottom bolts (pair) FB31T Top bolt only FB31B Bottom bolt only Certifications Meets ANSI A156.3 Type 25 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 10’0" Top Bolt Bottom Bolt C2 Flush bolts & coordinators B Pulls &plates For use with metal doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS D Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Hieight X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 27/32" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" E Stops Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options Exterior hardware Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". F Available accessory items G Miscellaneous hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C2 Ives Architectural hardware products Automatic flush bolts – Metal doors A B Pulls &plates For use with metal doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. FB32 Model with auxiliary fire latch eliminates the bottom bolt FB33 Model with auxiliary fire latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. Hinges & pivots FB32 Top bolt with auxiliary fire latch FB33 Top bolt with auxiliary fire latch and retrofit plate Certifications Auxiliary fire latch Flush bolts & coordinators Top bolt Meets ANSI A156.3 Type 25 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 8’0" Mounting 8-32 X 3/8" UFPHMS 10-12 X 1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS C3 Guide size Strike size Rub plate size (Width X Length X Height X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 27/32" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" Auxiliary fire latch size Retrofit plate size (Width X Length X Depth) (Width X Length X Thickness) 1" x 1-3/4" x 3-1/4" 1" x 6-3/4" x 3/32" D Body size (Width X Length X Depth) Latches, catches & bolts Dimensions Finishes Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 Brass US10 Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options F Satin bronze Oil rubbed bronze Exterior hardware 612 613 E Description Stops BHMA Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". Miscellaneous hardware Available accessory items Security pin screws DP1 and DP2 dust proof strike, see page C16 G Ives Architectural hardware products C3 Automatic flush bolts – Wood doors B Pulls &plates A Hinges & pivots FB41P Top and bottom bolts (pair) FB41T Top bolt only FB41B Bottom bolt only For use with wood doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Top bolt Certifications Bottom bolt Meets ANSI A156.3 Type 25 UL Listed 90 Min fire doors 8’0" X 8’0" Mounting C4 Flush bolts & coordinators 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" Stops D Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D E Custom finishes are available as engineering special, consult customer service. Available accessory items G Miscellaneous hardware F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C4 Ives Architectural hardware products Automatic flush bolts – Wood doors Meets ANSI A156.3 Type 25 UL Listed 3 Hour fire doors 8’0" X 8’0" B Auxiliary fire latch Pulls &plates Certifications Top bolt Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS C5 Flush bolts & coordinators A For use with Metal doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. FB42 Model with auxiliary fire latch eliminates the bottom bolt Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Hinges & pivots FB42 Top bolt with auxiliary fire latch Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" (Width X Length X Depth) 1" x 1-3/4" x 3-1/4" D Finishes Latches, catches & bolts Auxiliary Fire Latch Size BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 Brass US10 Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D E Satin bronze Oil rubbed bronze Stops 612 613 Custom finishes are available as engineering special, consult customer service. Available accessory items F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 G Miscellaneous hardware Ives Architectural hardware products C5 Constant latching flush bolts – Metal doors A Hinges & pivots FB51P Top and bottom bolts (pair) FB51T Top bolt only B Pulls &plates For use with metal doors only Constant latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed. Low actuation forces Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. Certifications Meets ANSI A156.3 Type 27 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 8’0" Flush bolts & coordinators Top bolt C6 Bottom bolt Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS D Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Height X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 11/16" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" E Stops Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options Exterior hardware Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". F Available accessory items G Miscellaneous hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C6 Ives Architectural hardware products Constant latching flush bolts – Metal doors A B Pulls &plates For use with metal doors only Constant latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed.. −− FB52 Model with auxiliary fire latch eliminates the bottom bolt −− FB53 Model with auxiliary fire latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. Low actuation forces Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. Hinges & pivots FB52 Top bolt with auxiliary fire latch FB53 Top bolt with auxiliary fire latch and retrofit plate Certifications Auxiliary fire latch Flush bolts & coordinators Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS Dimensions Guide size Strike size Rub plate size (Width X Length X Height X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 11/16" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" Auxiliary fire latch size Retrofit plate size (Width X Length X Depth) (Width X Length X Thickness) 1" x 1-3/4" x 3-1/4" 1" x 6-3/4" x 3/32" D Body size (Width X Length X Depth) Latches, catches & bolts C7 Top bolt Meets ANSI A156.3 Type 27 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 8’0" Finishes Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 Brass US10B Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options F Oil rubbed bronze Exterior hardware 613 BLK E Description Stops BHMA Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". Miscellaneous hardware Available accessory items G Security pin screws DP1 and DP2 dust proof strike, see page C16 Ives Architectural hardware products C7 Constant latching flush bolts – Wood doors Pulls &plates A Hinges & pivots FB61P Top and bottom bolts (pair) FB61T Top bolt only For use with wood doors only Constant latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when door closes. Low actuation forces Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" B Top bolt Certifications Bottom bolt Meets ANSI A156.3 Type 27 UL Listed 90 Min fire doors 8’0" X 8’0" Mounting C8 Flush bolts & coordinators 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" E Stops D Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Available accessory items G Miscellaneous hardware F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C8 Ives Architectural hardware products Constant latching flush bolts – Wood doors Certifications Meets ANSI A156.3 Type 27 UL Listed 20 Min fire doors 8’0" X 8’0" B Auxiliary fire latch Pulls &plates Top bolt Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS C9 Flush bolts & coordinators A For use with metal doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened −− FB62 Model with auxiliary fire latch eliminates the bottom bolt Low actuation forces Non-handed Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Hinges & pivots FB62 Top bolt with auxiliary fire latch Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" (Width X Length X Depth) 1" x 1-3/4" x 3-1/4" D Latches, catches & bolts Auxiliary Fire Latch Size Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 Brass US10 Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D E Satin bronze Oil rubbed bronze Stops 612 613 Custom finishes are available as engineering special, consult customer service. Available accessory items F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 G Miscellaneous hardware Ives Architectural hardware products C9 Manual flush bolts Hinges & pivots 261 Flush bolt - 4" A An exceptionally smooth working flush bolt with sharp, crisp lines Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Made from polished cast brass Bolt tip is 5/16" Diameter Bolt throw is 3/4" Bolt backset is 15/32" Certifications Pulls &plates Meets ANSI A156.16, L04201 B Mounting 5 X 5/8" FPHSMS 8 X 3/4" FPHSMS C10 Flush bolts & coordinators Dimensions Body size Strike size (Width X Length X Depth) (Width X Length) 3/4" x 4" x 1-1/8" 5/8" x 1-1/2" D Latches, catches & bolts Finishes BHMA Description Substrate US 605 Bright brass Brass US3 609 Satin brass Brass US5 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 625 Bright chrome Brass US26 626 Satin chrome Brass US26D G Miscellaneous hardware F Exterior hardware E Stops Custom finishes are available as engineering special, consult customer service C10 Ives Architectural hardware products Manual flush bolts A An exceptionally smooth working flush bolt with sharp, crisp lines Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Made from polished cast brass Bolt tip is 1/2" diameter Bolt throw is 1" Bolt backset is 15/32" Hinges & pivots 262 Flush bolt - 6" square end Certifications Pulls &plates Meets ANSI A156.16, L04201 B Mounting 5 X 5/8" FPHSMS 8 X 3/4" FPHSMS Dimensions Strike size (Width X Length) 3/4" x 6" x 1-11/32" 7/8" x 1-3/4" BHMA Description Substrate US 605 Bright brass Brass US3 609 Satin brass Brass US5 Brass US10B Satin nickel Brass US15 625 Bright chrome Brass US26 626 Satin chrome Brass US26D Custom finishes are available as engineering special, consult customer service. D Oil rubbed bronze Latches, catches & bolts 613 619 C11 Finishes Flush bolts & coordinators Body size (Width X Length X Depth) E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C11 Manual flush bolts Hinges & pivots 265 Flush bolt - 6" round end A A flush bolt with radiused bottom faceplate designed specifically for simple one-step router installation Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Faceplate is polished solid brass; bolt is made from aluminum zinc alloy Bolt tip is 1/2" diameter Bolt throw is 1" Bolt backset is 1/2" Pulls &plates Certifications B Meets ANSI A156.16, L042011 Mounting 5 X 5/8" FPHSMS 8 X 3/4" FPHSMS C12 Flush bolts & coordinators Dimensions Body size Strike size (Width X Length X Depth) (Width X Length) 3/4" x 6" x 1-7/16" 7/8" x 1-3/4" D Latches, catches & bolts Finishes BHMA Description Substrate US 605 Bright brass Brass US3 609 Satin brass Brass US5 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 625 Bright chrome Brass US26 626 Satin chrome Brass US26D G Miscellaneous hardware F Exterior hardware E Stops Custom finishes are available as engineering special, consult customer service. C12 Ives Architectural hardware products Manual flush bolts – Wood doors A B Pulls &plates When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf Reduces installation costs; requires only simple router mortise at top and bottom corners of doors Door strength and rigidity maintained by tying door faces to reinforcing extensions on guide with machine screws and bearing washers, not supplied Non-handed Bolt tip 1/2" diameter Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Not available for rabbeted door installations Hinges & pivots FB358 Top or bottom bolts Certifications Mounting C13 8 X 1" FPHSMS 8 X 3/4" FPHSMS Flush bolts & coordinators Meets ANSI A156.16, L04261 UL Listed 90 Minute fire doors 8’0" X 10’0". Fire rated openings require top and botom bolt. Dimensions Body size Guide Size Strike size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 1-3/8" 1" x 2-1/2" x 5/64" 15/16" x 2-1/4" x 5/64" Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK Brass US26 Satin chrome Brass US26D 643e/716 Aged bronze Brass – E Bright chrome Stops 625 626 D BHMA Latches, catches & bolts Finishes Custom finishes are available as engineering special, consult customer service. Available accessory items DP1 and DP2 dust proof strike, see page C16 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C13 Manual flush bolts – Metal doors Hinges & pivots FB457 Top or bottom bolts B Pulls &plates A When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed Bolt tip 1/2" diameter Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip Certifications Meets ANSI A156.16, L04261 UL Listed 3 Hour fire doors 8’0" X 10’0". Fire rated openings require top and bottom bolt. Flush bolts & coordinators Mounting 8-32 X 1" FPHMS C14 Dimensions Body size Guide Size Strike size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) 1-1/4" x 6-3/4" x 1-1/8" 1" x 2" x 5/64" 15/16" x 2-1/4" x 5/64" E Stops D Latches, catches & bolts Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D 643e/716 Aged bronze Brass – Custom finishes are available as engineering special, consult customer service. Available options Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24" for fire rated doors with AHJ approval, 36" and 48" for non-fire rated doors Exterior hardware Available accessory items G Miscellaneous hardware F DP1 and DP2 dust proof strike, see page C16 C14 Ives Architectural hardware products Manual flush bolts – Metal doors B Pulls &plates Certifications A When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed Bolt tip 1/2" diameter Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip Hinges & pivots FB458 Top or bottom bolts Meets ANSI A156.16, L04261 UL Listed 3 Hour fire doors 8’0" X 10’0". Fire rated openings require top and bottom bolt. C15 Dimensions Body size Guide Size Strike size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 1-1/8" 1" x 2" x 5/64" 15/16" x 2-1/4" x 5/64" Description Substrate US Bright brass Brass US3 Satin brass Brass US4 609 Blackened brass Brass US5 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B US15 Brass Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D 643e/716 Aged bronze Brass – E Satin nickel Matte black Stops 619 622 D 605 606 Latches, catches & bolts Finishes BHMA Flush bolts & coordinators Mounting 8-32 X 1" FPHMS Custom finishes are available as engineering special, consult customer service. Available options F Available accessory items Exterior hardware Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24" for fire rated doors with AHJ approval, 36" and 48" for non-fire rated doors DP1 and DP2 dust proof strike, see page C16 G Miscellaneous hardware Ives Architectural hardware products C15 Dust proof strikes A Hinges & pivots DP1 Dust proof strike - round face plate DP2 Dust proof strike - rectangular face plate Designed for use with the bottom bolt of all flush bolts. Spring-loaded plunger returns to floor or threshold level anytime flush bolt is retracted, eliminating need to clean standard floor strikes. Strike hole is 3/4" diameter and 1-1/8" deep DP1 Certifications Meets ANSI A156.16, L14011 Pulls &plates Mounting B 8-32 X 1" FPHMS Flush bolts & coordinators Dimensions D Latches, catches & bolts C16 DP2 DP1 Face Plate DP1 Face Plate Body: (Diameter) (Width X Length X Thickness) (Diameter X Depth) 1-7/16" 1-5/8" x 3-1/2" x 1/8" 1-3/16" x 1-7/8" Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B * 619 Satin nickel Brass US15 622* Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D 643e/716* Aged bronze Brass – *Finishes only available with DP2 Custom finishes are available as engineering special, consult customer service Available accessory items G Miscellaneous hardware F Exterior hardware E Stops Security pin screws C16 Ives Architectural hardware products How to order – Bar coordinators Hinges & pivots How to order COR and accessories A COR 52 US28 FL20 D 36" COR size: 32, 42, 52, 60, 72 Pulls &plates B Finishes: US28, US26D, 315AN Filler bar (if desired): FL20, FL32, FL44 C17 Flush bolts & coordinators Vertical rod exit device cutout type (if applicable): A, B, C, D, E, F, G If other vertical rod exit device not listed on chart, from page C16, include information as shown on page C16. Active door size – Required for ALL vertical rod exit device applications To determine the size COR you need: INACTIVE DOOR WIDTH INACTIVE LEAF ACTIVE LEAF W COORDINATOR V F STOP WIDTH STOP THICKNESS F Exterior hardware 48" Active door, 24" Inactive door, 5/8" stops Active door size, X = 48" Overall frame opening between stops, F = 94-3/4" Recommended coordinator: COR60 E 36" Active door, 18" Inactive door, 5/8" stops Active door size, X = 36" Overall frame opening between stops, F = 52-3/4" Recommended coordinator: COR42 Stops Pair of 36" doors, 5/8" stops Active door size, X = 36" Overall frame opening between stops, F = 70-3/4" Recommended coordinator: COR52 Y ACTIVE DOOR WIDTH D Examples: Pair of 30" doors, 5/8" stops Active Door Size, X = 30" Overall frame opening between stops, F = 58-3/4" Recommended coordinator: COR42 X Latches, catches & bolts Start with the active door width (X) Next consider the overall frame opening between stops (F) Preferably, the coordinator would equal the active door width (X) + approximately 1/2 inactive door width (Y). The coordinator must be 6" longer than the active door width (X) and less than the overall frame opening between stop (F). G Miscellaneous hardware Ives Architectural hardware products C17 Hinges & pivots Coordinators - Special factory preparation A Special factory preparation for use with vertical rod exit devices Exit device number Device backset Maximum active door Coordinator size needed Coordinator cutout type Mounting bracket needed Von Duprin 5547-F 2-3/8" 33" 43" 51" 63" 42" 52" 60" 72" Type A None Von Duprin 8827-F 2-3/4" 33" 43" 51" 63" 42" 52" 60" 72" Type B MB1V, MB2V or MB3V see page C22 Von Duprin 8847-F 2-3/8" 33" 43" 51" 63" 42" 52" 60" 72" Type C None Von Duprin 33/3547 33/3547-F 98/9947 98/9947-F 2-3/4" 33" 43" 51" 64" 42" 52" 60" 72" Type D None Von Duprin 33/3548 33/3548-F 98/9948 98/9948-F 2-3/4" 33" 43" 51" 64" 42" 52" 60" 72" Type D None Von Duprin 33/3547WDC 33/3547WDC-F 98/9947WDC 98/9947WDCF 1-5/16" 33" 43" 51" 66" 42" 52" 60" 72" Type E None Falcon 17-C F-17-C 18-C F-18-C XX-C F-XX-C 24-C F-24-C 25-C F-25-C 2-3/4" 33" 43" 51" 63" 42" 52" 60" 72" Type F None Falcon 17-C -WDC F-17-C -WDC 18-C -WDC F-18-C -WDC XX-C -WDC F-XX-C -WDC 24-C-WDC F-24-C -WDC 25-C-WDC F-25-C-WDC 2-13/16" 33" 43" 51" 63" 42" 52" 60" 72" Type G None E Stops D Latches, catches & bolts C18 Flush bolts & coordinators B Pulls &plates Coordinators may need to be prepared at the factory for use with some surface or concealed vertical rod exit devices. (See chart) Exit device manufacturer If the exit device is not listed the following information is needed. G Miscellaneous hardware F Exterior hardware Exit device manufacturer and model no. Active door size, “X” Inactive door size, “Y” Exit device backset, “U” Stop width, “W” Stop thickness if other than 5/8", “V” C18 Ives Architectural hardware products Coordinators – Bar coordinators A Hinges & pivots COR Bar coodinators B C19 Flush bolts & coordinators Certifications Meets ANSI A156.3 Type 21A UL Listed for installation on labeled frame Pulls &plates The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other. All COR units function easily. The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf. All COR units do not function correctly with swingclear hinges. Consult factory when used with 3/4" offset pivots. All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure. All COR units are compatible with flush bolts. For openings where doors are unequal size. The coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops. The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines. Material Substrate Aluminum 6000 Series Sizes Length of channel For opening widths Common applications COR32 32" 34" - 52" Pair of 2'0" Doors COR42 42" 52" - 72" Pair of 2'6" Doors COR52 52" 62" - 92" Pair of 3'0" Doors COR60 60" 70" - 108" Pair of 3'6" Doors COR72 72" 84" - 132" Pair of 4'0" Doors D Coordinator number Latches, catches & bolts The COR Series is available in five sizes for variable door opening widths. Finishes Substrate US Satin alumium Aluminum US28 711 Black anodized Aluminum 313AN 713 Satin chrome Aluminum US26D E Description 628 Stops BHMA Custom finishes are available as engineering special, consult customer service Available options F Exterior hardware Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line. Security pin screws Special prep cut-outs: Required for certain vertical exit device applications. See page C18 for common examples. If other vertical rod exit device not listed on chart is required, include required information as shown on page C18. Consult customer service for other applications. Available accessory items G Ives Architectural hardware products Miscellaneous hardware Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware. Security pin screws Replacement mounting package Replacement rub plate package C19 A Hinges & pivots Coordinators – Filler bars FL Filler bars The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines. The FL filler bars are available in three sizes for variable frame openings. FL filler bars are field sized to frame opening. Certifications B Pulls &plates Meets ANSI A156.3 Type 21A UL Listed for installation on labeled frame Material Substrate Aluminum 6000 Series Sizes Flush bolts & coordinators Filler Bar number Length Dimensions C20 (Width X Depth X Length) FL20 20" 1-5/8" x 5/8" x 20" FL32 32" 1-5/8" x 5/8" x 32" FL44 44" 1-5/8" x 5/8" x 44" Finishes D Latches, catches & bolts BHMA Description Substrate US 628 Satin alumium Aluminum US28 711 Black anodized Aluminum 313AN 713 Satin chrome Aluminum US26D Custom finishes are available as engineering special, consult customer service Available accessory items G Miscellaneous hardware F Exterior hardware E Stops Security pin screws C20 Ives Architectural hardware products Coordinators – Mounting brackets A Allows stop mounted hardware to be properly installed without damaging the COR coordinator, such as a parallel arm closer or a non-fire-rated surface vertical rod strike. Stop mounted hardware will need to be lowered to compensate for the height of the coordinator and mounting bracket. Hinges & pivots MB1 and MB2 Mounting brackets Certifications Meets ANSI A156.3 Type 21A Material substrate B Sizes Pulls &plates Aluminum A380 Product Jamb depth Stop width Dimensions MB1 4-3/4" Min Over 2-1/2" 4" W x 3" D x 15/16" T MB2 4-3/4" Min Up to 2-1/2" 4" W x 3-1/4" D x 1-5/8" T BHMA Description Substrate US Primed for paint Aluminum USP – Flat black painted Aluminum BLK 689 Aluminum painted Aluminum SP28 Custom finishes are available as engineering special, consult customer service. C21 600 Flush bolts & coordinators Finishes D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C21 Coordinators – Mounting brackets A Hinges & pivots MB1F, MB2F and MB3F Fire rated mounting brackets MB1V, MB2V and MB3V Allows for fire-rated stop mounted hardware to be properly installed without damaging the COR Coordinators, such as fire-rated surface vertical rod exit device strikes. Latch will need to be lowered to compensate for the height of the coordinator and mounting bracket. MB-V are designed for Von Duprin 8827-F soffit latch. MB1V Certifications Pulls &plates Meets ANSI A156.3 Type 21A Material substrate B Cold rolled steel Flush bolts & coordinators Sizes C22 MB2V Product Jamb depth Stop width Dimensions 4" W x 3" D x 1-5/8" T MB1F 5" 1-1/2" - 2-1/4" MB1V 5" 1-1/2" - 2-1/4" 4" W x 3" D x 1-5/8" T MB2F 5-7/8" 2-3/8" - 3-1/4" 4" W x 3" D x 1-5/8" T MB2V 5-7/8" 2-3/8" - 3-1/4" 4" W x 3" D x 1-5/8" T MB3F 6-7/8" Over 3-3/8" 4"W x 3-1/2" D x 1"T MB3V 6-7/8" Over 3-3/8" 4"W x 3-1/2" D x 1"T Finishes Latches, catches & bolts BHMA D MB3V Description Substrate US 600 Primed for paint Steel USP – Flat black painted Steel BLK 689 Aluminum painted Steel SP28 G Miscellaneous hardware F Exterior hardware E Stops Custom finishes are available as engineering special, consult customer service C22 Ives Architectural hardware products Coordinators – Gravity coordinators B Pulls &plates Certifications A When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door. Non-handed. Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Hinges & pivots COR7G and COR9G Gravity coordinators Meets ANSI A156.3 Type 21B UL Listed for fire doors Mounting 8-32 X 1" FPHMS Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 625 Bright chrome Brass US26 626 Satin chrome Brass US26D F Exterior hardware Security pin screws Replacement mounting package Replacement roller and bolt package Replacement rubber roller and pin package Replacement rub plate package E Available accessory items Stops Custom finishes are available as engineering special, consult customer service. D BHMA Latches, catches & bolts Finishes C23 Sizes COR7G 7" projection −− COR7G for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" COR9G 9" projection −− COR9G for use on pairs of doors with astragal on active over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Flush bolts & coordinators Material substrate Forged brass G Miscellaneous hardware Ives Architectural hardware products C23 Coordinators - Carry bar Hinges & pivots CB1 Carry Bar A Used when it is possible for the inactive door to be opened before the active door Prevents damage to the doors and other hardware Nylon roller insures quiet and efficient operation Non-handed Standard sex bolts for mounting Certifications Meets ANSI A156.3 Type 21A Pulls &plates Material substrate B All-steel construction Dimensions Door closed Door open 1.5/8" X 5.3/4" 1.5/8" X 2.1/2" D Latches, catches & bolts C24 Flush bolts & coordinators Finishes BHMA Description Substrate US 600 Primed for paint Steel USP 632 Bright brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US10 640 Dark satin bronze Steel US10B 651 Bright chrome Steel US26 652 Satin chrome Steel US26D – Flat black coated Steel BLK Custom finishes are available as engineering special, consult customer service. Available accessory items G Miscellaneous hardware F Exterior hardware E Stops Security pin screws Replacement nylon roller and pin package C24 Ives Architectural hardware products Surface bolts, latches & catches Hinges & pivots A Table of contents Surface bolts SB360 Surface bolt....................................................................................................................D2 SB453 Surface bolt....................................................................................................................D2 SB1630 Surface bolt..................................................................................................................D3 SB1640 Surface bolt..................................................................................................................D3 SB1600M1 Surface bolt.............................................................................................................D4 SB1600M2 Surface bolt............................................................................................................D4 Pulls &plates Decorative surface bolts B 40 Surface bolt, decorative light duty ..................................................................................D5 253 Surface bolt, decorative heavy duty ..............................................................................D5 Dutch door & mortise door bolts 054 Dutch door bolt ................................................................................................................. D6 S48 Mortise door bolt .............................................................................................................. D6 Flush bolts & coordinators Door guards 481 Chain door guard.................................................................................................................D7 482 Solid bar door guard..........................................................................................................D7 C Roller latches/optional strikes D1 Latches, catches & bolts RL30 Roller latch....................................................................................................................... D8 RL30A Roller latch.................................................................................................................... D8 RL32 Roller latch........................................................................................................................ D8 RL32A Roller latch..................................................................................................................... D8 RL36 Roller latch....................................................................................................................... D9 RL36A Roller latch..................................................................................................................... D9 RL38 Roller latch....................................................................................................................... D9 RL1152 Roller latch....................................................................................................................D10 STK685 Strike...........................................................................................................................D10 STK685L Strike.........................................................................................................................D10 Both strikes:...............................................................................................................................D10 Angle stops AS895 Angle stop...................................................................................................................... D11 AS18 Angle stop......................................................................................................................... D11 Latches/catches E Stops CL11 Invisible latch.................................................................................................................... D12 CL12 Invisible latch................................................................................................................... D12 CL14 Invisible latch, auxiliary pusher.................................................................................... D12 CL21 Ball catch........................................................................................................................... D13 CL21A Ball catch........................................................................................................................ D13 CL22 Ball catch.......................................................................................................................... D13 325 Magnetic catch.................................................................................................................. D14 326 Magnetic catch, dual double pole................................................................................. D14 327 Magnetic catch, dual triple pole.................................................................................... D14 330 Roller catch........................................................................................................................ D15 335 Roller catch........................................................................................................................ D15 336 Roller catch........................................................................................................................ D15 345 Ball catch, adjustable......................................................................................................D16 347 Ball catch, dual adjustable - square corners..............................................................D16 349 Ball catch, dual adjustable - rounded corners............................................................D17 2 Elbow Catch............................................................................................................................D17 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products D1 Surface bolts Hinges & pivots SB360 Surface bolt Flush bolts & coordinators B Pulls &plates A S urface bolt has 1-1/4" throw for maximum security Jimmy-resistant design, bolt locks automatically when thrown, can be released only be pressing knob toward door while retracting Ideal for all types of doors Available in 12" length Unit locks in both the up and down position Accepts padlock (not furnished) with maximum 3/8" diameter shackle, minimum 1-3/4" shackle opening height Units packed with one-way wood screws for added security - Standard wood screws also supplied Units packed with a universal top strike (US) Certifications Dimensions Meets ANSI A156.16 UL listed for 3 hour fire doors, up to 10'0" Miami Dade County NOA listed Florida Building Commision listed FEMA 361 and 320 listed Bar: 3/4" wide x 3/4" thick Overall width: 2-1/32" Overall projection: 2-1/16" Top Strike: 1-1/2" wide x 1-1/2" long x 3/16" thick Available mortise strike: 1-5/8" wide x 3-1/2" long x 1/8" thick Material substrate C Heavy duty steel Available mortise strike Available accessory items Sex bolts Mortise bottom strike (MS) Finishes Substrate Finish Clear zinc Steel US2C SB453 Surface bolt E D2 Latches, catches & bolts Description 604 Stops BHMA urface bolt has 1-3/16" throw for maximum security S Strong tension springs prevent creep Ideal for all types of doors Available 8" & 12" lengths Units packed with standard wood screws and machine screws to meet most field conditions Units packed with both a universal top strike (US) and a mortise bottom strike (MS) Certifications Dimensions Meets ANSI A156.16 L84161 UL listed for 3 hour fire doors, up to 10'0" Bar: 3/4" wide x 1/4" thick Overall width: 2-1/32" Overall projection: 1-5/16" Top Strike: 1-1/2" wide x 1-1/2" long x 3/16" thick Bottom strike: 1-5/8" wide x 3-1/2" long x 1/8" thick Material substrate Exterior hardware Heavy duty steel Available accessory items F Sex bolts Thru bolts (machine screws with cap nuts) not intended for use as security screws G Miscellaneous hardware Finishes BHMA Description Substrate Finish 604 632* 633* 639 640 643e/716 646 652 631 Clear zinc Bright brass Satin brass Satin bronze Oil rubbed bronze Aged bronze Satin nickel Satin chrome Matte black Steel Steel Steel Steel Steel Steel Steel Steel Steel US2C US3 US4 US10 US10B 643e/716 US15 US26D BLK * Only available in 8” bolt length. For other colors, consult factory. D2 Ives Architectural hardware products Surface bolts tandard surface bolt has 1" throw for maximum security S Ideal for all types of doors Fully concealed mounting prevents vandalism Units packed with wood and machine screws to meet most field conditions Comes end plug and end plug stud package Available in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations B Material substrate Pulls &plates Certifications 1630 Meets ANSI A156.16 L84161 and UL listed for 3 hour fire doors, up to 8'0" 1640 Meets ANSI A156.16 L24161 A Hinges & pivots SB1630 Surface bolt SB1640 Surface bolt 1630 Series is constructed of heavy duty steel 1640 Series is constructed of brass Flat bottom strike Dimensions Strike options T Top strike only B Bottom strike only TB Top and bottom strike* TL Top locking strike only BL Bottom locking strike only TBL Top and bottom locking strike* Body: 8" long x 7/8" wide x 3/4" thick, Overall knob or lock housing projection: 1-1/2" Top strike: 1-1/4" wide x 7/8" tall x 15/16" deep Bottom strike: 3" long x 1" wide x 1/8" thick * Available on SB1630 Only Security pin screw Sex bolts available End plug and end plug stud package Cylinder package Replacement strike packages D3 1289 Standard key code 1360 1390 1395 SB1630 Finishes BHMA 604 640 652 Finish US2C US10B US26D Bright brass Oil rubbed bronze Satin chrome Brass Brass Brass US3 US10B US26D E SUBSTRATE Steel Steel Steel Stops DESC Clear zinc Oil rubbed bronze Satin chrome SB1640 Finishes 605 613 626 Latches, catches & bolts Available accessory items Key code C Available options Flush bolts & coordinators Universal top strike For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products D3 Surface bolts A Hinges & pivots SB1600M1 Surface bolt SB1600M2 Surface bolt tandard surface bolt has 3-1/2" throw for maximum security and for doors with larger undercuts S Sleek handle design Ideal for all types of doors Fully concealed mounting prevents vandalism Available in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations Units packed with wood and machine screws to meet most field conditions M1 version has Actuator tab pointing away from the door M2 version has Actuator tab pointing towards the door B Pulls &plates Certifications Meets ANSI A156.16 L84161 and UL Listed for 3 hour fire doors, up to 8'0" Material substrate Optional flat bottom strike SB1600M2 SB1600M2-TL Optional universal strike Constructed of heavy duty steel Available options Dimensions Strike options T Top strike only B Bottom strike only TL Top locking strike only BL Bottom locking strike only Bar: 11" long x 3/4" wide x 3/4" thick, locking version 1-1/2" thick Top strike: 1-1/4" wide x 7/8" tall x 15/16" deep Bottom strike: 3" long x 1" wide x 1/8" thick Available accessory items Latches, catches & bolts C Flush bolts & coordinators SB1600M1 Security pin screw Sex bolts available End plug and end plug stud package Cylinder package Replacement strike packages Key code 1289 Standard key code 1360 1390 1395 D4 SB1630 Finishes BHMA 689 691 695 706 631 DESC Aluminum painted Dull bronze painted Dark bronze painted Dull brass painted Matte black G Miscellaneous hardware F Exterior hardware E Stops For other colors, consult factory. D4 Ives Architectural hardware products SUBSTRATE Steel Steel Steel Steel Steel Finish SP28 SP10 SP313 SP4 BLK Decorative surface bolts Hinges & pivots 40 Surface bolt, decorative light duty Material substrate Made from extruded brass B Dimensions Pulls &plates Certifications Meets ANSI/BHMA A156.16 A Recommended for 1-3/8" and 1-3/4" hollow core doors or door partitions Concealed screw design enhances appearance and security Exceptional strength and durability provided by interlocking construction of heavy gauge track and rod Permanent stop prevents rod disengagement from track Tension spring holds bolt in desired position Track assures smooth operation and interlocks with side edges of rod to eliminate marring Decorative 5/8" diameter knob designed to facilitate bolt operation Available in 3", 4" and 6" lengths Units packed with wood screws Packed with both universal and mortise strikes Flush bolts & coordinators Throw: 15/16" Projection: 3/4" Width: 11/16" Length: 3", 4" or 6" Finishes Mortise strike Substrate Finish Bright brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass B3 B5 B10B B15 B26 B26D 643e/716 BLK Latches, catches & bolts Description 605 609 613 619 625 626 643e/716 622 C Universal strike BHMA For other colors, consult factory. D5 253 Surface bolt, decorative heavy duty Dimensions Material substrate Made from solid brass Finishes Throw: 1-1/8" Projection: 1-5/16" Half round rod: 5/8" Overall width: 1-5/8" Length: 8" or 12" Description Substrate Finish 605 613 626 Bright brass Oil rubbed bronze Satin chrome Brass Brass Brass B3 B10B B26D F BHMA Exterior hardware Certifications Meets ANSI/BHMA A156.16 E Recommended for 1.3/4" or larger doors Heavy duty, decorative bolt ideal where extra strength required Decorative 1-1/4" diameter knob fits well with any décor and designed to facilitate bolt operation Available in 8" and 12" lengths. Optional lengths available, consult factory. Units packed with wood screws Packed universal strike (US) & mortise strike (MS) Stops For other colors, consult factory. Miscellaneous hardware Universal strike Mortise strike G Ives Architectural hardware products D5 Dutch door & mortise door bolts Hinges & pivots 054 Dutch door bolt Pulls &plates A Practical, rugged, attractive bolt for application on dutch doors as well as other areas Chamfered rod end draws the two leaves of door tightly together Sufficient tolerance provided in strike opening to allow for misalignment of door leaves and also prevents binding of bolt Decorative 1" diameter knob designed to facilitate bolt operation Units packed with wood screws Packed with Standard Strike (SS), Mortise Strike (MS) and Universal Strike (US) Certifications Dimensions Meets ANSI/BHMA A156.16 B Material substrate Made from solid brass Standard strike Mortise strike Universal strike C Flush bolts & coordinators Finishes Throw: 5/8" Projection: 1-1/8" Half round rod: 5/8" Overall width: 1-5/8" Rod length: 4-1/4" Overall length: specify 4-3/8" (including knob) BHMA Description Substrate Finish 605 606 612 613 619 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass B3 B4 B10 B10B B15 B26 B26D Latches, catches & bolts For other colors, consult factory. D6 S48 Mortise door bolt Brass oval turn knob and escutcheon Steel bolt for extra strength Rack is milled for precision fit with pinion Units packed with wood screws Certifications Dimensions Meets ANSI/BHMA A156.16 Material substrate E Stops Made from brass and steel Exterior hardware Finishes BHMA Description Substrate Finish 605 609 613 619 625 626 Bright brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass B3 B5 B10B B15 B26 B26D G Miscellaneous hardware F For other colors, consult factory. D6 Ives Architectural hardware products Backset: 1-3/4" Bolt throw: 1/2" Bolt diameter: 1/2" Case: 2-1/2" long x 9/16" diameter Strike: 1-3/4" high x 7/8" wide Door guards Hinges & pivots 481 Chain door guard Dimensions Door plate: 3-3/8" long x 1-3/8" wide Chain holder: 2" high x 3/4" wide Chain length: 6-1/4" Material substrate B Made from wrought brass or burnished wrought steel Pulls &plates Certifications Meets ANSI/BHMA A156.16 A Permits the door to be slightly opened to allow viewing Narrow chain holder maintains chain in stationary position when door guard is not in use, eliminating marring of door and frame caused by dangling chain Welded twist link steel chain finished to match door plate and chain holder Packed with sheet metal screws Finishes - Brass and steel Substrate Finish 605 626 632 633 638 639 643e/716 646 651 652 631 Bright brass Satin chrome Bright brass Satin brass Blackened brass Satin bronze Aged bronze Satin nickel Bright chrome Satin chrome Matte black Brass Brass Steel Steel Steel Steel Steel Steel Steel Steel Steel B3 B26D F3 F4 F5 F10 F-643e/716 F15 F26 F26D F-BLK C Description Flush bolts & coordinators BHMA For other colors, consult factory. Material substrate Made from cast brass or cast zinc Available accessory items Dimensions - Cast zinc Shims available in US26D (626) only, 1/8" or 3/8" for brass only Plate - edge protection Strike plate: 2-1/2" high x 7/8" wide Holder: 2-1/2" high x 15/16" wide Arm length: 3-13/16" Finishes Brass Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B10 B10B B15 B26 B26D B-643e/716 B-BLK Description Bright brass Blackened brass Bright chrome Satin chrome Substrate Zinc Zinc Zinc Zinc Finish Z605E Z609E Z625E Z626E Finishes Zinc BHMA 677 --681 682 For other colors, consult factory. Ives Architectural hardware products G Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Miscellaneous hardware Description 605 606 612 613 619 625 626 643e/716 622 F BHMA Exterior hardware Cast aluminum Strike plate: 2-5/8" high x 1-1/32" wide Holder: 1-3/4" high x 1-1/16" wide Arm length: 4-3/4" Edge guard: 1-1/8" high x 1-1/32" wide E Dimensions - Cast brass Stops Certifications Meets ANSI/BHMA A156.16 D7 Cast brass For use on doors that are flush with frames The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing The hinged bar allows the door guard to be positioned 180° away from the door when not in use Edge protection plate, furnished with cast brass door guards only, minimizes the chance for marring the door or frame. Can be purchased as a separate item for Aluminum substrate Strike plate is designed to prevent the solid bar from marring the inside of the door when in use Packed with sheet metal screws Latches, catches & bolts 482 Solid bar door guard D7 Roller latches A Hinges & pivots RL30 Roller latch RL30A Roller latch B Pulls &plates Recommended for higher traffic applications Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted using adjusting screws on the face of the unit Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller standard Units packed with wood and machine screws to meet most field conditions RL30A model packed with ASA strike Certifications Dimensions Meets ANSI/BHMA A156.16, E19091 Body: 1-1/8" wide x 2-1/4" high x 2-1/4" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" thick, lip to center- 1-1/4" Optional ASA strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" Available accessory items Flush bolts & coordinators Strike - ASA Security mounting screws Brass roller Silencers Material substrate Made from forged brass D8 Latches, catches & bolts C Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 643e/716 622 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 US26 US26D 643e/716 BLK For other colors, consult factory. RL32 Roller latch RL32A Roller latch Exterior hardware E Stops Recommended light duty cabinet and closet applications Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning knurled knob on back of latch. Maximum projection of the roller is 1/2" allowing for variance in the door clearance Fits heavy-duty cylindrical lock cutout Nylon roller standard Non-handed Units packed with wood screws RL32A model packed with ASA strike Certifications Dimensions Meets ANSI/BHMA A156.16, E19091 Body: 1-1/8" wide x 2-1/4" high x 2-1/4" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" thick, lip to center - 1-1/4" Optional ASA strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" F Available accessory items Strike—A—ASA Material substrate Made from brass G Miscellaneous hardware Finishes D8 BHMA Description Substrate Finish 605 606 612 613 619 625 626 643e/716 622 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 US26 US26D 643e/716 BLK For other colors, consult factory. Ives Architectural hardware products Roller latches Material substrate Available accessory items Strike—A—ASA BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D For other colors, consult factory. Material substrate E Dimensions Body: 1-3/8" wide x 2" high x 7/8" deep Strike: 1" wide x 2-1/8" high x 3/8" deep Stops Certifications Meets ANSI/BHMA A156.16, L27092 D9 Rim style roller latch Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning slotted screw Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller Non-handed Units packed with wood screws Latches, catches & bolts RL38 Roller latch C Finishes Flush bolts & coordinators Made from stainless steel B Dimensions Body: 1" wide x 2-1/4" high x 2" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" Thick, lip to center- 1-1/4" Optional ASA strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" Pulls &plates Certifications Meets ANSI/BHMA A156.16, L57082 A Recommended light duty cabinet and closet applications Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning slotted screw on back of latch Maximum projection of the roller is 5/16" allowing for variance in the door clearance Fits cylindrical lock cutout Nylon roller Non-handed Units packed with wood screws RL36A model packed with ASA strike Hinges & pivots RL36 Roller latch RL36A Roller latch Made from stainless steel Finishes Description Substrate Finish 630 satin stainless Stainless steel US32D For other colors, consult factory. F Exterior hardware BHMA G Miscellaneous hardware Ives Architectural hardware products D9 Roller latches Hinges & pivots RL1152 Roller latch Pulls &plates A Recommended for higher traffic applications Combination of RL30 Roller Latch and Angle Stop Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjustable using adjusting screws on the face of the unit Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller standard Forged brass construction Units packed with wood screws B 685 A&B Dim. Variable Certifications Dimensions Meets ANSI/BHMA A156.16, E19111 Body: 1-1/2" wide x 4-1/2" high x 1-3/4" deep with 3/4" angle Strike: 1-1/8" wide x 2-1/4" high x 5/32" thick Material substrate Made from forged brass Available accessory items Flush bolts & coordinators Security mounting screws Brass roller Silencers D10 Latches, catches & bolts C Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 643e/716 622 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 US26 US26D 643e/716 BLK For other colors, consult factory. Optional Strikes 1-11/16" 3/32" STK685 Strike E Stops Dimple of strike centered on strike STK685L Strike Location of strike dimple is variable Please specify location of dimple from edge of frame to centerline of the dimple - B Dimple will be located B + 3/16" to accommodate lip A 1-5/32" 2-1/4" STK685 A B G Miscellaneous hardware F Exterior hardware Both strikes: STK685L Custom make strike for doors that swing both directions For use with roller latches Specify frame depth - A. Overall strike length will be A + 3/8" to accommodate 3/16" lip on each side Units packed with wood and machine screws to meet most field conditions Material substrate Dimensions Made from 3/32" brass Strike width: 2-1/4" Strike length: specified frame width + 3/8" Finishes BHMA Description Substrate Finish 605 606 612 613 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D For other colors, consult factory. D10 Ives Architectural hardware products Angle stops Material substrate Dimensions Made from 1/8" brass 1-1/2" wide x 1" angle x 2-1/2" long A Surface applied stop for single doors Large rubber bumper to ensure quiet operation Units packed with wood and machine screws to meet most field conditions Hinges & pivots AS895 Angle stop Available accessory items Security pin screws Substrate Finish Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D For other colors, consult factory. C AS18 Angle stop Surface applied stop for single and double doors Includes SR64 door silencers to ensure quiet operation SR64 silencers are replaceable Units packed with wood and machine screws to meet most field conditions Material substrate Dimensions Made from 3/16" brass 1-1/2" wide x 3/4" angle x 3-1/2" long D11 Latches, catches & bolts Flush bolts & coordinators Description 605 606 612 613 625 626 B BHMA Pulls &plates Finishes Available accessory items Security pin screws Finishes Substrate Finish 605 606 612 613 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D For other colors, consult factory. E Description Stops BHMA F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products D11 Invisible latches Hinges & pivots CL11 Invisible latch B Pulls &plates A Invisible latch is ideal for installations where no visible latch or strike is desired Unit can be installed at the top, bottom or side of the door Can be mortised into the stop or surface mounted to the stop Recommended for use on small panels, cabinet doors or light weight closet doors Operation is simple, latching is accomplished by a slight push To unlatch the door, a harder push releases the door and pushes the door out Brass and plastic construction Applies 13 pounds to open the door Units packed with wood screws Certifications Available accessory items Meets ANSI/BHMA A156.9, B03272 Security pin screws Material substrate Dimensions Made from brass and plastic Body: 1-1/4" wide x 1-7/8" high x 7/16" thick Strike: 9/16" wide x 1-5/16" high x 9/16" high Flush bolts & coordinators See finishes below C CL12 Invisible latch D12 Latches, catches & bolts Invisible latch is ideal for installations where no visible latch is desired Unit can be installed at the top, bottom or side of the door Can be mortised into the stop or surface mounted to the stop Recommended for use on larger panels or regular size doors Operation is simple, latching is accomplished by a slight push To unlatch the door, a harder push releases the door and pushes the door out Brass and plastic construction Applies 27 pounds to open the door Units packed with wood screws Certifications Available accessory items Meets ANSI/BHMA A156.9, B03272 Security pin screws Material substrate Dimensions Made from brass and plastic Body: 1-1/4" wide x 2-1/4" high x 9/16" thick Strike: 5/8" wide x 1-13/16" high x 9/16" projection Stops See finishes below E CL14 Invisible latch, auxiliary pusher F Exterior hardware Aid in the operation of the CL11 and CL12 where hinges or surrounding conditions prevent smooth operation of doors Provides 1-1/16" throw Nylon pusher Applies 10 pounds to open the door Units packed with wood screws Certifications Available accessory items Meets ANSI/BHMA A156.9, B13282 Security pin screws Material substrate Dimensions Made from brass Body: 2-15/16" long x 1-11/16" wide x 5/8" deep Miscellaneous hardware See finishes below G C11, C12 and C14 Finishes BHMA Description Substrate Finish 605 606 612 626 Bright brass Satin brass Satin bronze Satin chrome Brass Brass Brass Brass US3 US4 US10 US26D For other colors, consult factory. D12 Ives Architectural hardware products Ball catches Material substrate Made from brass B Dimensions Body: 3/4" wide x 3" high x 3/4" deep Strike: 3/4" wide hex x 1-1/2" high Pulls &plates Certifications Meets ANSI/BHMA A156.9 A Four-way catch with hexagon stud Ideal for holding medium duty doors The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut Strike can enter body from any direction Spring tension is easily adjusted to suit field conditions Body can be surface applied or mortised Units packed with wood screws Hinges & pivots CL21 Ball catch Available accessory items Security pin screws BHMA Description Substrate Finish 626 Satin chrome Brass US26D C For other colors, consult factory. CL21A Ball catch Available accessory items Security pin screws Material substrate Dimensions Made from brass Body: 3/4" wide x 3" high x 3/4" deep Strike: 7/16" wide x 1-3/4" high x 7/8" deep E Stops CL22 Ball catch D13 Certifications Meets ANSI/BHMA A156.9, B13292 Latches, catches & bolts Four-way catch with plate type strike Ideal for closet doors, access doors, hinged openings and numerous other applications The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut Strike can enter body from any direction Spring tension is easily adjusted to suit field conditions Body can be surface applied or mortised Units packed with wood screws See finishes below Flush bolts & coordinators Finishes Available accessory items Security pin screws Material substrate Dimensions Made from brass Body: 1/2" wide x 2-3/16" high x 1/2" deep Strike: 3/8" wide x 1-3/8" high x 5/8" deep CL21A and CL 22 Finishes Description Substrate Finish 605 606 612 625 626 Bright brass Satin brass Satin bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass US3 US4 US10 US26 US26D G BHMA Miscellaneous hardware See finishes below F Certifications Meets ANSI/BHMA A156.9, B13302 Exterior hardware Three-way catch with plate type strike. Ideal for smaller cabinet doors or panels. The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut. Strike can enter body from either side or front. Spring tension is easily adjusted to suit field conditions. Body can be surface applied or mortised. Units packed with wood screws For other colors, consult factory. Ives Architectural hardware products D13 Magnetic catches Hinges & pivots 325 Magnetic catch A Double pole Self aligning magnet ensures maximum pull Case design allows easy magnet adjustment on cabinet or small door applications. Packed with sheet metal screws 5 lbs. load capacity Certifications Dimensions Meets ANSI/BHMA A156.9, B43171 Case: 1-1/8" wide x 2-1/16" long x 5/8" thick Pulls &plates Material substrate Case made from aluminum B Finishes BHMA Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum A3 A92 C Flush bolts & coordinators For other colors, consult factory. 326 Magnetic catch, dual double pole D14 Latches, catches & bolts Dual double pole Self-aligning magnets ensure maximum pull Can be surface mounted or mortised Packed with sheet metal screws, 2 short strikes and 1 long strike 9 lbs. load capacity Certifications Dimensions Meets ANSI/BHMA A156.9, B43161 Case: 1" wide x 3-1/8" long x 9/16" thick Material substrate Case made from aluminum Finishes BHMA Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum A3 A92 E Stops For other colors, consult factory. 327 Magnetic catch, dual triple pole F Exterior hardware Dual triple pole • Self-aligning magnets insure maximum pull • Can be surface mounted or mortised. • Packed with sheet metal screws, 2 short strikes and 1 long strike • 14 lbs. load capacity Certifications Dimensions Meets ANSI/BHMA A156.9, B43161 Case: 1" wide x 3-1/8" long x 3/4" thick Material substrate Miscellaneous hardware Case made from aluminum G Finishes BHMA Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum A3 A92 For other colors, consult factory. D14 Ives Architectural hardware products Roller catches Most economical solution recommended for low frequency opening applications Independent rollers allow positive action and self-alignment Cushioned rollers absorb shock and noise, hold door away from cabinet Application allows for easy adjustment Packed with screws and brads Certifications Dimensions Meets ANSI/BHMA A156.9, B83071 Case: 1-1/4" high x 11/16" wide Strike: 1-1/4" high x 3/8" wide B Finishes Pulls &plates Material substrate Made from wrought steel A Hinges & pivots 330 Roller catch BHMA Description Substrate Finish 604 Clear zinc Steel F2C For other colors, consult factory. Recommended for higher frequency opening applications Smooth, positive latching action insured by powerful conical spring Durable nylon roller insures quiet operation Adjustable tension. Adjustments can be varied from 4 to 17 lbs. of holding power making possible a wide range of door performance Easily installed on thin doors Full lip style strike designed for simplified mortising Packed with sheet metal screws Material substrate Made from wrought brass See finishes below D15 Dimensions Face plate: 7/8" wide x 2-1/4" high Bore: 1-3/4" deep x 13/16" diameter Strike: 1-5/8" wide x 2-1/4" high, lip to center- 1-3/16" Latches, catches & bolts Certifications Meets ANSI/BHMA A156.16, L27081 for brass and L87081 for steel C Flush bolts & coordinators 335 Roller catch 336 Roller catch Material substrate Made from wrought brass See finishes below F Dimensions Face plate: 7/8" wide x 2-1/4" high Bore: 13/16" diameter x 1-3/4" deep Strike: 7/8" wide x 2-1/4" high, lip to center- 1-1/8" Exterior hardware Certifications Meets ANSI/BHMA A156.16, L27081 for brass and L87081 for steel E Recommended for higher frequency opening applications Smooth, positive latching action insured by powerful conical spring Durable nylon roller insures quiet operation Adjustable tension. Adjustments can be varied from 4 to 17 lbs of holding power making possible a wide range of door performance Easily installed on thin doors Standard box type strike designed for neat appearance Packed with sheet metal screws Stops 335 and 336 Finishes Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10 B10B B15 B26 B26D 643e/716 BLK For other colors, consult factory. Ives Architectural hardware products G Description 605 606 609 612 613 619 625 626 643e/716 622 Miscellaneous hardware BHMA D15 Ball catches Hinges & pivots 345 Ball catch, adjustable Pulls &plates A Recommended for lower frequency opening applications Ideal for cabinets and small interior doors Free rolling ball insures smooth, positive and trouble-free action Adjustable threaded barrel compensates for various door clearances Adjustable spring tension Units packed with wood screws Certifications Dimensions Meets ANSI/BHMA A156.9, B23013 Face plate: 3/4" wide x 1-1/2" high Bore: 1" deep x 9/16" diameter Strike: 25/32" wide x 1-1/2" high, lip to center- 13/32" Material substrate B Made from wrought brass C Flush bolts & coordinators Finishes BHMA Description Substrate Finish 605 609 612 613 619 625 626 Bright brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass US3 US5 US10 US10B US15 US26 US26D Latches, catches & bolts For other colors, consult factory. 347 Ball catch, dual adjustable - square corners D16 Recommended for lower frequency opening applications Ideal for cabinets and small interior doors Free rolling ball insures smooth, positive and trouble-free action Adjustable threaded barrel compensates for various door clearances Adjustable spring tension Rounded corners on strike lip for safety Units packed with wood screws Certifications Dimensions Meets ANSI/BHMA A156.9, B23013 Face Plate: 1" wide x 2-1/8" high Bore: 7/8" diameter x 1-3/8" deep Strike: 1-3/8" wide x 2-1/8" high, lip to center- 7/8" E Stops Material substrate Made from wrought brass F Exterior hardware Finishes BHMA Description Substrate Finish 605 606 609 612 613 619 625 626 643e/716 622 Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US3 US5 US10 US10B US15 US26 US26D 643e/716 BLK G Miscellaneous hardware For other colors, consult factory. D16 Ives Architectural hardware products Ball catches Recommended for lower frequency opening applications For catch in door installations Radiused corners allow easy installation with a router Dual adjustment for door clearance and holding strength Lip strike is designed for use where strike is mounted in jamb Free rolling ball insures smooth, positive and trouble-free action Adjustable threaded barrel compensates for various door clearances Adjustable spring tension Rounded corners on strike lip for safety Units packed with wood screws A Dimensions Face Plate: 1" wide x 2-1/8" high Bore: 7/8" diameter x 1-3/8" deep Strike: 1-3/8" wide x 2-1/8" high, lip to center- 7/8" Material substrate Made from wrought brass B Certifications Meets ANSI/BHMA A156.9, B23013 Pulls &plates Hinges & pivots 349 Ball catch, dual adjustable - rounded corners Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US3 US5 US10 US10B US15 US26 US26D 643e/716 BLK Latches, catches & bolts Description 605 606 609 612 613 619 625 626 643e/716 622 C BHMA Flush bolts & coordinators Finishes For other colors, consult factory. D17 2 Elbow Catch Ideal for use on the inactive leaf of a pair of cabinet doors Surface applied, making installation simple Made from cast aluminum E Stops Certifications Meets ANSI/BHMA A156.9 B33023 Dimensions Plate: 1-3/8" high x 5/8" wide Strike: 13/16" high x 5/8" wide A3 BHMA 666 A5 A14 A15 A92 669 670 673 A716 F Ives Number Exterior hardware Finishes - Aluminum G Miscellaneous hardware Ives Architectural hardware products D17 G Miscellaneous hardware F Exterior hardware E Stops D18 Latches, catches & bolts C Flush bolts & coordinators B Pulls &plates A Hinges & pivots Notes D18 Ives Architectural hardware products Door stops Kick down holders FS452 Kick down holder..........................................................................................................E15 FS455 4" Kick down holder.................................................................................................... E16 FS544 4" Kick down holder.................................................................................................... E16 FS555 5" Kick down holder.................................................................................................... E16 Plunger type door holders FS1153 Plunger type door holder............................................................................................E17 FS1154 Plunger type door holder............................................................................................E17 Roller bumpers RB470 Offset roller bumper................................................................................................... E18 RB471 4-1/2" Roller bumper.................................................................................................. E18 RB472 6" Roller bumpers........................................................................................................ E18 Residential door stops 060 3" Flexible door stops..................................................................................................... E19 061 4" Flexible door stops..................................................................................................... E19 60 3-3/4" Base door stops.................................................................................................... E20 61 3-1/8" Base door stops..................................................................................................... E20 63 Flexible door stops.............................................................................................................E21 64 Base door stop.....................................................................................................................E21 69 Hinge pin door stops..........................................................................................................E22 70 Hinge pin door stops...........................................................................................................E23 72 Hinge pin door stops...........................................................................................................E24 73 Hinge pin door stops...........................................................................................................E24 D Latches, catches & bolts Door silencers SR64 Door silencer - metal.....................................................................................................E25 SR65 Door silencer - wood.....................................................................................................E25 SR66 Door silencer - adhesive...............................................................................................E25 E1 Stops WS11 Wall stop - drywall/wood............................................................................................E9 WS11X Wall stop - masonry......................................................................................................E9 WS20 Manual wall holders - drywall/wood........................................................................E9 WS20X Manual wall holders - masonry................................................................................E9 WS33 Wall stops - drywall/wood........................................................................................ E10 WS33X Wall stops - masonry............................................................................................... E10 WS65 Wall stop........................................................................................................................ E10 WS401/402CVX (Convex) wall bumpers.............................................................................E11 WS401/402CCV (Concave) wall bumpers...........................................................................E11 WS404CVX (Convex) wall bumpers......................................................................................E11 WS406/407CVX (Convex) wall bumpers...........................................................................E12 WS406/407CCV (Concave) wall bumpers.........................................................................E12 411R-W Wall bumper - adhesive.............................................................................................E12 WS40 Automatic wall holder................................................................................................ E14 WS45 Automatic wall holder - drywall/wood................................................................. E14 WS45X Automatic wall holder - masonry......................................................................... E14 C Wall stops/bumpers Automatic wall holders Flush bolts & coordinators FS9 Floor stop & semi-automatic holder............................................................................. E7 FS40 Floor stop & automatic holder..................................................................................... E7 FS41................................................................................................................................................ E7 FS42............................................................................................................................................... E7 FS43............................................................................................................................................... E7 FS446 Floor stop & manual door holder - masonry...........................................................E8 FS450 Floor stop & manual door holder - drywall/wood.................................................E8 FS495 Wall stop & automatic holder....................................................................................E8 FS496 Floor stop & automatic holder - 3/8" max clearance..........................................E8 FS497 Floor stop & automatic holder - 1" max clearance................................................E8 WS443 Wall stop - masonry...................................................................................................E13 WS447 Wall stop - drywall/wood.........................................................................................E13 WS445 Manual wall holder - masonry.................................................................................E13 WS449 Manual wall holder - drywall/wood.......................................................................E13 B Floor stops & holders Wall stops & holders Pulls &plates FS13 Dome stop........................................................................................................................... E2 R14 Dome stop rise..................................................................................................................... E2 FS17 Dome stop........................................................................................................................... E2 FS436 Dome stop....................................................................................................................... E3 FS438 Dome stop....................................................................................................................... E3 R435 Riser for FS436 Dome stop............................................................................................ E3 R437 Riser for FS438 Dome stop............................................................................................ E3 FS439 Universal dome floor stop...........................................................................................E4 FS410 Decorative floor stop.....................................................................................................E4 FS18S Floor stop - 1 1/2"............................................................................................................E5 FS18L Floor stop - 3 1/2"...........................................................................................................E5 FS434 Floor stop........................................................................................................................E5 430 Floor door stop....................................................................................................................E5 FS441 Floor stop.........................................................................................................................E6 FS444 Floor stop - masonry.....................................................................................................E6 FS448 Floor stop - drywall/wood..........................................................................................E6 A Floor stops Hinges & pivots Table of contents Crash stop CS115 Crash stop........................................................................................................................E26 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E1 Floor stops — dome Hinges & pivots FS13 Dome stop Standard FS13 for use where no threshold is used Heavy-duty cast dome stops constructed of brass Unique riser design of R14 (below) allows easy conversion to threshold application Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete Replaceable- grey rubber bumper A Certifications B Pulls &plates Meets ANSI/BHMA A156.16, L12141 Material substrate Dimensions Made from cast brass Overall height: 1" Base height: 5/32" Base diameter: 1-3/4" Available accessory items Security pin screws Grey rubber bumper Flush bolts & coordinators See finishes below R14 Dome stop rise C Adapts the FS13 Dome stop to threshold use. Material substrate Dimensions Made from cast brass Riser height: 5/16" Base diameter: 1-3/4" round Latches, catches & bolts See finishes below D FS17 Dome stop One piece dome stop for use with thresholds Heavy-duty cast dome stops constructed of brass Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete Grey rubber bumper Certifications E2 Stops Meets ANSI/BHMA A156.16, L12161 Material substrate Dimensions Made from cast brass Overall height: 1-11/32" Base height: 1/2" Base diameter: 1-3/4" round Available accessory items Security pin screws Grey rubber bumper Exterior hardware See finishes below Miscellaneous hardware F FS13, R14 and FS17 Finishes BHMA Description Substrate Finish 605 606 612 613 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D G For other colors, consult factory. E2 Ives Architectural hardware products Floor stops — dome FS436 for doors without threshold FS438 for doors with threshold or undercut doors Heavy-duty cast dome stops Packed with fasteners for light duty masonry and wood applications Grey rubber bumper A Hinges & pivots FS436 Dome stop FS438 Dome stop Certifications FS436 Dimensions FS436 Overall height: 1" Base height: 3/16" Base diameter: 1-3/4" x 2" oval Available accessory items Security pin screws Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 Finishes - Aluminum BHMA Description Substrate Finish 628 Satin aluminum Aluminum US28 D Description 605 606 609 612 613 619 622 625 626 --- Latches, catches & bolts BHMA C Finishes - Brass FS438 Flush bolts & coordinators FS438 Overall height: 1-3/8" Base height: 9/16" Base diameter: 1-3/4" x 2" oval B Material substrate Made from cast brass or aluminum Pulls &plates FS436 Meets ANSI/BHMA A156.16, L12141 for brass and L32141 for aluminum FS438 Meets ANSI/BHMA A156.16, L12161 for brass and L32161 for aluminum For other colors, consult factory. E3 Stops R435 Riser for FS436 Dome stop R437 Riser for FS438 Dome stop R435 for conversion of FS436 Dome stop to carpet installation R437 For conversion of FS438 Dome stop to carpet installation Packed with fasteners for heavy duty masonry and wood applications F Dimensions Base diameter: 1" X 1-7/16" oval Heights: available in 1/4", 3/8", 1/2" 5/8", 3/4" and 1" height 1" Exterior hardware Material substrate Made from aluminum, mill finish Miscellaneous hardware 1-7/16" G 1" OR LESS PAD FLOOR Ives Architectural hardware products E3 Floor stops Hinges & pivots FS439 Universal dome floor stop A High or low-rise mount Spring-loaded rubber contact Packed with fasteners for light duty masonry and wood applications Grey rubber bumper Certifications Dimensions Meets ANSI/BHMA A156.16 Material substrate Pulls &plates Made from cast zinc or stainless steel Overall height: 1-1/2" Pad height: 1-1/8" Base height: 1/4" Base diameter: 1-7/8" B Available accessory items Replaceable rubber bumper C Flush bolts & coordinators Finishes - Zinc BHMA Description Substrate Finish 676 677 678 704 --681 682 --- Matte black Bright brass Satin brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc BLK US3 US4 US10B US15 US26 US26D 643e/716 Latches, catches & bolts Finishes - Stainless steel BHMA Description Substrate Finish 630 Satin Stainless Stainless steel US32D D For other colors, consult factory. FS410 Decorative floor stop E4 Stops Non-directional Packed with fasteners for light duty masonry and wood applications. Black rubber ring Certifications Dimensions Meets ANSI/BHMA A156.16 Overall height: 1-1/2" Bumper thickness: 1/4" Diameter: 1-1/4" Material substrate Made from cast brass Available accessory items Exterior hardware Replaceable rubber bumper Miscellaneous hardware F Finishes BHMA Description Substrate Finish 605 619 622 625 626 --- Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass US3 US15 BLK US26 US26D 643e/716 G For other colors, consult factory. E4 Ives Architectural hardware products Floor stops Security door stops designed for use in high vandalism areas Molded from black flame resistant, resilient material around a heavy-duty stud Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed Ideal for jail or security cell areas where floor mounted stops are required FS18L also ideal for concrete wall applications Finishes Black rubber FS18S FS18S Height: 1-1/2" FS18S Diameter: 2" FS18S Stud length: 2-1/2" FS18L Height: 3-1/2" FS18L Diameter: 2" FS18L Stud length: 2-1/2" B Dimensions Pulls &plates Material substrate Made from rubber A Hinges & pivots FS18S Floor stop - 1 1/2" FS18L Floor stop - 3 1/2" FS18L Dimensions Overall height: 2-5/8" Base size: 1-1/2" W x 2-3/4" L Available accessory items C Material substrate Made from wrought steel Flush bolts & coordinators FS434 Floor stop For undercut doors up to 1-1/2" Packed with fasteners for light duty masonry and wood applications Soft, resilient black rubber Replaceable soft, resilient black rubber. Description Substrate Finish 604 Zinc Plated Steel US2C 430 Floor door stop D BHMA Latches, catches & bolts Finishes For undercut doors up to 1-1/2". Welded wood screws for wood applications. White rubber tip Available accessory items E5 Dimensions Overall height: 1-5/16" Base diameter: 1-1/4" Stops Material substrate Made from cast brass and aluminum Replaceable white tips Black rubber tips Finishes - Brass Substrate Finish Bright brass Satin brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10B US15 US26 US26D Description Substrate Finish 666 --669 673 Bright brass Blackened brass Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A92 For other colors, consult factory. Ives Architectural hardware products G BHMA Miscellaneous hardware Finishes - Aluminum F Description 605 606 609 613 619 625 626 Exterior hardware BHMA E5 Floor stops Hinges & pivots FS441 Floor stop A Accommodates door undercut up to 1-1/2" Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts Grey non-marring rubber bumper Packed with fasteners for heavy duty masonry and wood applications Certifications Dimensions Meets ANSI156.16, L12131 Overall height: 2-1/8" Overall length: 2-7/8" Base depth: 1-5/8" Pulls &plates Material substrate Made from cast brass B Available accessory items Replaceable grey non-marring rubber bumper Latches, catches & bolts C Flush bolts & coordinators Finishes - Zinc BHMA Description Substrate Finish 605 606 609 612 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 For other colors, consult factory. D FS444 Floor stop - masonry FS448 Floor stop - drywall/wood Ideal for interior or exterior use Accommodates door undercut up to 2-1/2" Replaceable black non-marring rubber tip FS444 is packed with fasteners for heavy duty masonry applications FS448 is packed with fasteners for drywall/wood applications Certifications E6 Stops FS444 Meets ANSI/BHMA 156.16, L12131 for brass FS448 Meets ANSI/BHMA 156.16, L12121 for brass and L32121 for aluminum FS444 Material substrate Dimensions Made from cast brass and aluminum Overall height: 3" Base diameter: 2-1/2" Available accessory items Exterior hardware Replaceable black non-marring rubber bumper G Miscellaneous hardware F Finishes - Brass BHMA Description Substrate Finish 605 606 609* 612 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 Finishes - Aluminum BHMA Description Substrate Finish 628* Satin aluminum Aluminum US28 For other colors, consult factory. * Not available on FS444. E6 Ives Architectural hardware products Floor stops & holders Hinges & pivots FS9 Floor stop & semi-automatic holder Available accessory items Security pin screws Replaceable hook package Material substrate Pulls &plates Certifications Meets ANSI/BHMA 156.16, L11241 A Semi-automatic floor-mounted holders accommodates with door to floor clearance of 1-1/2" or less Activate holder by flipping the engagement tongue forward. When door is opened, the hook (mounted on door) engages the tongue. To release, push firmly on door to disengage tongue Packed with fasteners for extra-heavy duty masonry and wood applications B Dimensions Made from cast brass Overall height: 3-1/2" Base dimensions: 2" wide x 3-1/2" long Finishes Substrate Finish Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D C Description 605 606 612 613 625 626 Flush bolts & coordinators BHMA For other colors, consult factory. Latches, catches & bolts FS40 Floor stop & automatic holder FS41 FS42 FS43 Finishes BHMA 605 606 612 1-3/4” 613 625 626 1/2” 1-3/16” SIDE VIEW BODY Substrate CLEARANCE FROM 1-1/8 to 1-9/16 Finish US3 US4 US10 US10B US26 US26D For other colors, consult factory. G Miscellaneous hardware F40 MAX. DOOR CLEARANCE Description Bright brass Brass Satin brass Brass 2-1/4” Satin bronze Brass CLEARANCE Oil rubbed bronze Brass FROM 9/16 to 1-1/16 Bright chrome Brass Satin chrome Brass F 1/8” CLEARANCE Available accessory items Strike Packages CLEARANCE FROM 9/16 to 1-1/16 E7 Material substrate Made from forged brass 1-3/4” Door to floor clearance: FS40 1/2" or less FS41 9/16" to 1-1/16" FS42 1-1/8" to 1-9/16" FS43 1-5/8" to 2-1/16" Holder dimensions: 3" wide x 3-11/16" high Exterior hardware Dimensions Stops Certifications Meets ANSI/BHMA 156.16, L11301 D Automatic door holders ideal for heavy-traffic situations that require a simple, foolproof, Hold-open device Unit is activated automatically when door is opened. A firm pull on door releases the mechanism Strikes accommodate different door to floor clearances Model numbers are determined by strike/door-to-floor clearances Holder position on door is adjustable Packed with fasteners for heavy duty masonry and wood applications 1-3/4” CLEARANCE FROM 9/16 to 1-1/16 FS41 2-1/4” CLEARANCE FROM 1-1/8 to 1-9/16 FS42 CLEARANCE FROM 1-5/8 to 2-1/16 2-3/4” FS43 Ives Architectural hardware products E7 Floor stops & holders Manual type floor holder ideal for interior or exterior use Accommodates door undercut up to 2-1/2" Replaceable black non-marring rubber tip Unit functions as a stop but serves as a hold-open device when hook is manually engaged in strike. Unit requires manual disengagement to release hold-open FS446 is packed with fasteners for heavy duty masonry applications FS450 is packed with fasteners for drywall/wood applications Certifications FS446 FS446 Meets ANSI/BHMA 156.16, L11371 for brass and L31371 for aluminum FS450 Meets ANSI/BHMA 156.16, L11361 for brass and L31361 for aluminum B Pulls &plates A Hinges & pivots FS446 Floor stop & manual door holder - masonry FS450 Floor stop & manual door holder - drywall/wood Material substrate Dimensions Made from cast brass and aluminum Available accessory items Flush bolts & coordinators Replaceable black non-marring rubber bumper Overall height: 3-3/4" Height from floor to stop center line: 2-5/8" Stop diameter: 1-1/16" Base diameter: 2-1/12" Finishes - Brass C BHMA D Latches, catches & bolts 605 606 612 613 619 622 625 626 --- Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum For other colors, consult factory. E8 Stops FS495 Wall stop & automatic holder FS496 Floor stop & automatic holder - 3/8" max clearance FS497 Floor stop & automatic holder - 1" max clearance FS495 Automatic door holders ideal for heavy-traffic situations that require a simple, holdopen device Recommended installation is holder on door and strike on wall Holder position on door is adjustable Holder is tapered to prevent “child riding” Packed with fasteners for heavy duty masonry and drywall/wood applications Exterior hardware Certifications Miscellaneous hardware F FS495 Meets ANSI/BHMA 156.16, L11291 for brass FS496 Meets ANSI/BHMA 156.16, L11301 for brass FS497 Meets ANSI/BHMA 156.16, L11301 for brass Material substrate Dimensions Made from cast brass FS495 Holds door 3-3/4" from wall. FS496 Door to floor clearances 3/8" maximum. FS497 Door to floor clearances 1" maximum Finishes G BHMA 605 606* 612 613 625 626 E8 Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Substrate Brass Brass Brass Brass Brass Brass For other colors, consult factory. * Not available on FS496 and FS497. Ives Architectural hardware products Finish US3 US4 US10 US10B US26 US26D Wall stops WS11 Material substrate Made from cast brass Finishes Substrate Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US26 US26D For other colors, consult factory. WS20 D Hexagon section on unit aids in fastening unit when expansion shield is used Replaceable black rubber bumpers feature off-set shoulder and threaded shank that screws into body of holder Hinged strike furnished matches body material and finish WS20 is packed with fasteners for drywall/wood applications WS20X is packed with fasteners for heavy duty masonry applications Latches, catches & bolts WS20 Manual wall holders - drywall/wood WS20X Manual wall holders - masonry C Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Flush bolts & coordinators BHMA 605 606 612 613 625 626 Dimensions Base diameter: 2" Overall projection: 3-3/4" B Available accessory items Security pin screws Replaceable black non-marring rubber bumper Pulls &plates Certifications WS11 Meets ANSI/BHMA 156.16, L12011 WS11X Meets ANSI/BHMA 156.16, L12021 A Hexagon section on unit aids in fastening unit when expansion shield is used Replaceable black rubber bumpers features off-set shoulder and threaded shank that screws into body of unit WS11 is packed with fasteners for drywall/wood applications WS11X is packed with fasteners for heavy duty masonry applications Hinges & pivots WS11 Wall stop - drywall/wood WS11X Wall stop - masonry Certifications Dimensions Available accessory items Security pin screws Replaceable black non-marring rubber bumper Base diameter: 2-3/8" Overall projection: 4" Strike height: 2" Strike width: 1" Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum For other colors, consult factory. Ives Architectural hardware products G Finish US3 US4 US10 US10B US26 US26D Miscellaneous hardware Substrate Brass Brass Brass Brass Brass Brass F BHMA 605 606 612 613 625 626 Exterior hardware Finishes - Brass E9 Material substrate Made from cast brass or aluminum Stops WS20 Meets ANSI/BHMA 156.16, L11341 for brass and L31341 for aluminum WS20X Meets ANSI/BHMA 156.16, L11351 for brass and L31351 for aluminum E9 Wall stops A Hinges & pivots WS33 Wall stops - drywall/wood WS33X Wall stops - masonry Replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft Sloping design discourages vandalism WS33 is packed with fasteners for drywall/wood applications. WS33X is packed with fasteners for heavy duty masonry applications Pulls &plates Certifications B WS33 Available accessory items WS33 Meets ANSI/BHMA 156.16, L12011 Security Pin screws WS33X Meets ANSI/BHMA 156.16, L12021 Replaceable black non-marring rubber bumper Material substrate Made from cast brass Finishes BHMA 626 Flush bolts & coordinators Dimensions Base diameter: 2-1/4" wide x 3" high Overall projection: 3-3/4" Description Satin chrome Substrate Brass Finish US26D C For other colors, consult factory. WS65 Wall stop Latches, catches & bolts Replaceable non-marring white rubber bumper Packed with fasteners for wood applications Material substrate Dimensions Made from cast aluminum Base diameter: 1-5/8" Overall projection: 3-3/4" D Available accessory items Replaceable white non-marring rubber bumper Replaceable black non-marring rubber bumper Finishes Stops E10 BHMA 666 668 703 --- Description Bright brass Satin bronze Oil rubbed bronze Clear satin aluminum G Miscellaneous hardware F Exterior hardware For other colors, consult factory. E10 Ives Architectural hardware products Substrate Aluminum Aluminum Aluminum Aluminum Finish US3 US10 US10B US27 Wall bumpers Constructed in heavy-duty cast brass Special retainer ring makes rubber tamper resistant Grey rubber bumper WS401/402CVX – convex rubber bumper, packed with fasteners for drywall/wood applications WS401/402CCV – concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications Certifications B WS401/402CVX Meets ANSI/BHMA 156.16, L12101 WS401/402CCV Meets ANSI/BHMA 156.16, L12251 Material substrate Dimensions Made from cast brass Base diameter: 2-1/2" Base thickness: 3/8" Overall projection: 1" Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Substrate Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 US26 US26D C BHMA 605 606 612 613 619 625 626 Flush bolts & coordinators Finishes - Brass Pulls &plates WS401CCV & WS402CCV A Hinges & pivots WS401/402CVX (Convex) wall bumpers WS401/402CCV (Concave) wall bumpers For other colors, consult factory. D Compact size Constructed in cast brass Totally concealed mounting discourages vandalism or tampering Unit furnished with grey convex rubber bumper Packed with fasteners for drywall/wood applications Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 For other colors, consult factory. F Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Exterior hardware BHMA 605 606 609 612 613 619 622 625 626 --- E11 Dimensions Base diameter: 1" Overall projection: 17/32" Stops Material substrate Made from cast brass Finishes - Brass Latches, catches & bolts WS404CVX (Convex) wall bumpers G Miscellaneous hardware Ives Architectural hardware products E11 Wall bumpers A Hinges & pivots WS406/407CVX (Convex) wall bumpers WS406/407CCV (Concave) wall bumpers Constructed in sturdy yet economical wrought base of brass or stainless steel construction Feature concealed tamper-proof mounting Shipped factory preassembled backplate to reduce installation cost Easy installation by inserting screwdriver through small hole in rubber WS406/407CVX – convex rubber bumper, packed with fasteners for drywall/wood applications WS406/407CCV – concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications Pulls &plates B WS406CVX & WS407CVX Certifications Flush bolts & coordinators WS406/407CVX Meets ANSI/BHMA 156.16, L22201 for brass and L52201 for stainless steel WS406/407CCV Meets ANSI/BHMA 156.16, L22251 for brass and L52251 for stainless steel Material substrate Dimensions Made from brass and stainless steel Base diameter: 2-1/2" Base thickness: 3/8" Overall projection: 1" Finishes - Brass D Latches, catches & bolts C BHMA 605 606 609 612 613 619 622 625 626 --- Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Stainless steel Finish US32D Finishes - Stainless steel BHMA 630 Description Stainless steel Stops E12 For other colors, consult factory. 411R-W Wall bumper - adhesive F Exterior hardware Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only Non-marring white rubber Concave design permits knob to strike stop without damaging or engaging lock mechanism Material substrate Dimensions Made from rubber Base diameter: 1-7/8" Base thickness: 3/8" Overall projection: 1-1/16" Finishes G Miscellaneous hardware BHMA --- E12 Ives Architectural hardware products Description White Substrate Rubber Finish R-W Wall stops & holders WS443 Ideal for interior or exterior use Replaceable black non-marring rubber tip WS443 is packed with fasteners for heavy duty masonry applications WS447 is packed with fasteners for drywall/wood applications Certifications WS443 Meets ANSI/BHMA 156.16, L12021 for brass and L32021 for aluminum WS447 Meets ANSI/BHMA 156.16, L12011 for brass and L32011 for aluminum Available accessory items Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 For other colors, consult factory. D WS445 Manual wall holder - masonry WS449 Manual wall holder - drywall/wood Unit functions as a stop but serves as a hold-open device when hook is manually engaged in strike Unit requires manual disengagement to release hold-open Replaceable black non-marring rubber tip WS445 is packed with fasteners for heavy duty masonry applications WS449 is packed with fasteners for drywall/wood applications Available accessory items Replaceable black non-marring rubber bumper Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628* Description Satin aluminum G Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Miscellaneous hardware BHMA 605 606 612 613 619 622 625 626 --- F Finishes - Brass Base diameter: 2-1/4" Base projection: 3-11/16" Engaged projection: 5-3/4" Strike height: 1-1/2" Strike width: 13/16" Strike projection: 13/16" Exterior hardware Dimensions Stops Material substrate E13 Certifications WS445 Meets ANSI/BHMA 156.16, L11351 for brass WS449 Meets ANSI/BHMA 156.16, L11341 for brass and L31341 for aluminum Made from cast brass or aluminum Latches, catches & bolts Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze C BHMA 605 606 612 613 619 622 625 626 --- Flush bolts & coordinators Finishes - Brass B Dimensions Base diameter: 2-1/4" Overall projection: 3-11/16" Pulls &plates Material substrate Made from cast brass Replaceable black non-marring rubber bumper WS445 A Hinges & pivots WS443 Wall stop - masonry WS447 Wall stop - drywall/wood For other colors, consult factory. *Only available on WS449. Ives Architectural hardware products E13 Automatic wall holders Hinges & pivots WS40 Automatic wall holder A Holder is mounted on wall and strike is mounted on door Roller on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the sound and shock Packed with fasteners for light duty masonry and drywall/wood applications Certifications Pulls &plates Meets ANSI/BHMA 156.16, L11291 for brass, and L31291 for aluminum Material substrate Dimensions Made from cast brass or aluminum B Available accessory items Security pin screw Hook package Finishes - Brass C Flush bolts & coordinators BHMA 605 606 612 613 625 626 Substrate Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US26 US26D Substrate Aluminum Finish US28 Finishes - Aluminum Latches, catches & bolts BHMA 628 Description Satin aluminum For other colors, consult factory. D WS45 Automatic wall holder - drywall/wood WS45X Automatic wall holder - masonry Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position A heavy rubber pad cushions the shock and absorbs the sound With unit mounted on door and the strike on wall, vertical adjustment is available on body The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date. WS45 is packed with fasteners for drywall/wood applications. WS45X is packed with fasteners for heavy duty masonry applications WS45 Certifications WS45 Meets ANSI/BHMA 156.16, L11291 for brass and L31291 for aluminum WS45X Meets ANSI/BHMA 156.16, L11291 for brass and L31291 for aluminum Material substrate Dimensions Made from cast brass or aluminum Available accessory items Exterior hardware Stops E14 Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Base height: 2" Base width: 2-1/2" Base projection: 2-1/4" Engaged projection: 3-1/2" Strike height: 2-1/16" Strike width: 3/4" Strike projection: 2" F Security pin screw Hook package Finishes - Brass G Miscellaneous hardware BHMA 605 606 612 613 619 622 625 626 --- Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Base height: 3-11/16" Base width: 3" Base projection: 2" Engaged projection: 3-7/16" Strike diameter: 2-3/8" Strike projection: 3" Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 E14 Description Satin aluminum For other colors, consult factory. Ives Architectural hardware products Kick down holders B Finishes - Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum D Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Latches, catches & bolts Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze C BHMA 605 606 612 613 619 622 625 626 --- Flush bolts & coordinators Dimensions FS452-4 Door-to-floor clearance: 2" or less FS452-5 Door-to-floor clearance: up to 3" FS452-4 Plate height: 2-1/8” FS452-5 Plate height: 2-1/8" FS452-4 Plate width: 1" FS452-5 Plate width: 1" Available accessory items Pulls &plates Material substrate Made from cast brass or aluminum Replaceable black non-marring rubber shoes A Certifications Meets ANSI/BHMA 156.16, L11383 for brass and L31383 for aluminum Hinges & pivots FS452 Kick down holder Units provide simple hold and release, activated with a touch of the foot Stainless steel spring Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications FS452-4 has a door-to-floor clearance of 2" or less FS452-5 has a door-to-floor clearance up to 3" For other colors, consult factory. *Available in 4" only. Stops E15 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E15 Kick down holders Hinges & pivots FS455 4" Kick down holder A Units provide simple hold and release, activated with a touch of the foot. Stainless steel spring Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications Door-to-floor clearances of 2" or less Certifications B Pulls &plates Meets ANSI/BHMA 156.16, L11382 for brass and L31382 for aluminum Material substrate Dimensions Made from cast brass or aluminum Door-to-floor clearance: 2" or less Plate height: 1-3/4" Plate width: 1-3/4" Available accessory items Replaceable black non-marring rubber shoes Flush bolts & coordinators Finishes - Brass Latches, catches & bolts C BHMA 605 606 612 613 619 622 625 626 --- Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Aluminum Aluminum Aluminum Aluminum Finish US28 US3AL US5AL US10AL US27 Finishes - Aluminum D BHMA 628 666 --668 --- Description Satin aluminum Bright brass Blackened brass Satin bronze Clear satin aluminum For other colors, consult factory. F Exterior hardware Stops E16 FS544 4" Kick down holder FS555 5" Kick down holder Units provide an economical method to hold open doors. Stainless steel spring Replaceable grey non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications FS544 for door-to-floor clearances of 2" or less FS555 for door-to-floor clearances up to 3" FS544 Certifications Dimensions FS544 Meets ANSI/BHMA 156.16, L11381 FS555 Meets ANSI/BHMA 156.16, L11391 FS544 Door-to-floor clearance: 2" or less Plate height: 2-1/4" Plate width: 1-7/16" FS555 Door-to-floor clearance: up to 3" Plate height: 2-1/4" Plate width: 1-7/16" Material substrate Made from cast iron Available accessory items Miscellaneous hardware Replaceable grey non-marring rubber shoes Finishes G BHMA 706 691 689 695 --- E16 Description Brass painted Bronze painted Aluminum painted Dark bronze painted Matte black For other colors, consult factory. Ives Architectural hardware products Substrate Iron Iron Iron Iron Iron Finish SP4 SP10 SP28 SP313 BLK Plunger type door holders B Material substrate Made from cast brass Pulls &plates Dimensions Height: 5-1/2" Width: 2" Depth: 1-1/4" A Certifications Meets ANSI/BHMA 156.16, L11401 Hinges & pivots FS1153 Plunger type door holder Provides a contemporary yet economical method of positive hold-open. Spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. Provides a 1-5/8" throw for all types of doors. Ribbed grey non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn. Packed with fasteners for wood applications Available accessory items Replaceable grey non-marring rubber shoes BHMA 628 Description Satin aluminum Substrate Aluminum Finish US28 For other colors, consult factory. C Flush bolts & coordinators Finishes - Aluminum FS1154 Plunger type door holder Dimensions Height: 6-1/4" Width: 1-1/2" Depth: 1-7/16" Material substrate Made from cast aluminum D Certifications Meets ANSI/BHMA 156.16, L31401 Latches, catches & bolts Plunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors. Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever. Round non-marring rubber shoe is securely fastened with a screw in flanged cup to prevent movement or loss. When worn, shoes are easily replaced. Packed with fasteners for wood applications. Stops E17 Available accessory items Replaceable grey non-marring rubber shoes Finishes Substrate Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US26 US26D For other colors, consult factory. F Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Exterior hardware BHMA 605 606 612 613 625 626 G Miscellaneous hardware Ives Architectural hardware products E17 Roller bumpers A Hinges & pivots RB470 Offset roller bumper RB471 4-1/2" Roller bumper RB472 6" Roller bumpers RB470 Offset roller bumper. Used where two doors open against each other to prevent damage to the doors or hardware RB471 and RB472 Straight roller bumpers. Ideal for use in situations where doors meet each other at approximate right angles (back to back) Grey rubber roller Packed with fasteners for wood applications RB470 B Pulls &plates Certifications B Offset Material substrate Dimensions Made from cast brass A items Available accessory Replaceable grey non-marring rubber shoes C Flush bolts & coordinators A RB470 Meets ANSI/BHMA 156.16, L12212 RB471 Meets ANSI/BHMA 156.16, L12192 RB472 Meets ANSI/BHMA 156.16, L12202 Finishes BHMA 605 606** 612* 613* 619* 625 626 D Latches, catches & bolts RB471 B A Stops Miscellaneous hardware F Exterior hardware RB472 A G A E18 Ives Architectural hardware products Substrate Brass Brass Brass Brass Brass Brass Brass For other colors, consult factory. *Only available on RB472. **Only available on RB471 and RB472. A A E18 A B Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome RB470 Base size: 1-11/16" x 2-1/4" RB470 Arm offset: 2-3/4" RB470 Length: 5" RB471 Base diameter: 2" RB471 Length: 4-1/2" RB472 Base diameter: 2" RB472 Length: 6" A Finish US3 US4 US10 US10B US15 US26 US26D Residential door stops A Hinges & pivots 060 3" Flexible door stops 061 4" Flexible door stops Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Packed disassembled for quick installation White rubber tip Packed with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16 Available accessory items Replaceable white rubber tip available Base diameter: 1" Tip diameter: 19/16" 060 3" Projection 061 4" Projection B Dimensions Pulls &plates Material substrate Made from steel Finishes Finish F-BLK F3 F5 F10 F10B F14 F-643E/716 F15 F26 F26D F-W For other colors, consult factory. **Only available on 061. D Latches, catches & bolts Substrate Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel C Description Matte black Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Aged bronze Satin nickel Bright chrome Satin chrome White Flush bolts & coordinators BHMA 631 632 638 639 640 645 --646 651 652 ---** Stops E19 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E19 60 3-3/4" Base door stops 61 3-1/8" Base door stops Aluminum and brass substrate Simple to install - only a screwdriver required Packed disassembled for quick installation Available in three sizes to accommodate varying areas of installation and door trim dimensions White rubber tip. Note: 61A - 643E/716 ships with black rubber tips Welded fastener for wood applications Material substrate Dimensions Made from brass, aluminum, or zinc 60 3-3/4" Projection, base diameter: 1", Tip diameter: 5/8" 61 Brass and alum 3-1/8" projection, base Diameter: 7/8", tip diameter: 5/8" 61 Zinc 2-7/8" projection, base diameter: 1", tip diameter: 5/8" Available accessory items B Pulls &plates A Hinges & pivots Residential door stops Zinc substrate Replaceable white rubber tip available Replaceable black rubber tip available Finishes - Brass Latches, catches & bolts C Flush bolts & coordinators BHMA 605 606 609 612 613 619 620* 622 625 626 --- Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Blackened nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish B3 B4 B5 B10 B10B B15 B15A B-BLK B26 B26D B-643e/716 Description Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Bright Chrome Satin Chrome Aluminum clear coat Aged bronze Matte black White Substrate Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Finish A3 A5 A10 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W Description Satin nickel Aged bronze Substrate Zinc Zinc Finish Z619 Z-643e/716 Finishes - Aluminum Stops E20 D BHMA 666 ---* 668* 703 669 670 672 702 673 -------* Finishes - Zinc Exterior hardware BHMA ---* ---* G Miscellaneous hardware F For other colors, consult factory. *Only available on 61. E20 Ives Architectural hardware products Residential door stops Hinges & pivots 63 Flexible door stops Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Packed disassembled for quick installation White rubber tip Packaged with fastener for wood applications A Dimensions Base diameter: 1" Tip diameter: 9/16" Projection: 3" Available accessory items B Replaceable white rubber tip available Replaceable black rubber tip available Finishes Substrate Steel Steel Steel Steel Steel Steel Steel Steel Finish F-BLK F3 F5 F-643E/716 F15 F26 F26D F-W For other colors, consult factory. Material substrate Dimensions Made from solid brass or aluminum Base diameter: 1" Tip diameter: 9/16" Projection: 3-1/4" Available accessory items Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish B3 B4 B5 B10 B10B B15 B-BLK B26 B26D B-643e/716 Substrate Aluminum Aluminum Aluminum Finish A3 A10B A92 F Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Exterior hardware BHMA 605 606 609 612 613 619 622 625 626 --- Stops Finishes - Brass E21 Replaceable white rubber tip available Replaceable black rubber tip available D Base door stop features deluxe one-piece styling Easily screws into base Designed with hexagonal head to accommodate wrench or pliers when installing White rubber tip Packaged with fastener for wood applications Latches, catches & bolts 64 Base door stop C Description Matte black Bright brass Blackened brass Aged bronze Satin nickel Bright chrome Satin chrome White Flush bolts & coordinators BHMA 631 632 638 --646 651 652 --- Pulls &plates Material substrate Made from wrought steel Finishes - Aluminum Description Bright brass Oil rubbed bronze Aluminum clear coat For other colors, consult factory. G Miscellaneous hardware BHMA 666 703 673 Ives Architectural hardware products E21 Residential door stops Hinges & pivots 69 Hinge pin door stops Pulls &plates A Economical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable Adjustable for 70° to 100° Door Openings Positive slip proof adjustment White non-marring rubber tips Removable bushings accommodate 1/4” to 5/16” diameter hinge pins Easy installation—only a screwdriver required Material substrate Dimensions Made from burnished wrought steel Base diameter: 1" Tip diameter: 9/16" Projection: 3-1/4" B Available accessory items Replaceable white rubber tip available Finishes C Flush bolts & coordinators BHMA 631 632 638 639 640 645 --646 647 651 652 Description Matte black Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Aged bronze Satin nickel Bright nickel Bright chrome Satin chrome G Miscellaneous hardware F Exterior hardware Stops E22 D Latches, catches & bolts For other colors, consult factory. E22 Ives Architectural hardware products Substrate Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Finish F-BLK F3 F5 F10 F10B F14 F-643E/716 F15 F15A F26 F26D Residential door stops Available accessory items Replaceable white rubber tip available B Finishes - Brass Substrate Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Finish A3 A4 A5 A10 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W Description Dark bronze Aged bronze Substrate Zinc Zinc Finish Z406E Z-643e/716 Finishes - Zinc BHMA ----- Stops BHMA 666 667 --668 703 669 670 672 702 673 ------- E23 Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Bright Chrome Satin Chrome Aluminum clear coat Aged bronze Matte black White Finishes - Aluminum D Finish B3 B4 B5 B10 B10B B15 B-BLK B26 B26D B-643e/716 Latches, catches & bolts Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass C Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Flush bolts & coordinators Brass and zinc substrate BHMA 605 606 609 612 613 619 622 625 626 --- Pulls &plates Material substrate Made from brass, aluminum, or zinc A Aluminum substrate Hinges & pivots 70 Hinge pin door stops Economical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable Designed for narrow trim installation High quality rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4" to 5/16" diameter hinge pins Easy installation White rubber and nylon tips (Note: 70A - 716 ships with black rubber tips) For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E23 Residential door stops Hinges & pivots 72 Hinge pin door stops B Pulls &plates A Economical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable 85° to 125° Door opening adjustments Designed for narrow trim installation White rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4” to 5/16” diameter hinge pins Easy installation Material substrate Dimensions Made from cast zinc Post length: 1 7/8" Available accessory items Replaceable white rubber tip available Finishes C Flush bolts & coordinators BHMA 676 677 --704 --681 682 ----- Description Matte black Bright brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze White Substrate Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Finish Z-BLK Z-605E Z-609E Z-613E Z-619E Z-625E Z-626E Z-643e/716 Z-W D Latches, catches & bolts For other colors, consult factory. 73 Hinge pin door stops Stops E24 Economical solution for use on low frequency, 4 1/2" hinges or above hinged doors where the installation of a standard door stop or overhead is not desirable 85° to 125° Door opening adjustments Designed for narrow trim installation White rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4" to 5/16" diameter hinge pins Easy installation Material substrate Available accessory items Made from cast zinc Replaceable white rubber tip available Finishes F Exterior hardware BHMA 677 704 --681 Description Bright brass Oil rubbed bronze Satin nickel Bright chrome G Miscellaneous hardware For other colors, consult factory. E24 Ives Architectural hardware products Substrate Zinc Zinc Zinc Zinc Finish Z-605E Z-613E Z-619E Z-625E Door silencers B Material substrate Made from 60 Durometer styrene butadiene rubber Pulls &plates Dimensions Diameter: 1/2" Thickness: 1/8" (projection from frame when inserted) A Certifications Meets ANSI/BHMA 156.16, L03011 Hinges & pivots SR64 Door silencer - metal For use on metal frames featuring pneumatic design that, once installed,forms an air pocket to absorb shock and reduce noise of door closing Tamper-proof once installed on the frame Proper installation also eliminates door rattle and provides constant tension for door latches or locks Packed in bags of 100 Grey also available in bulk pack of 2500 Each bag has an installation tool included Finishes Description Grey Substrate Rubber Finish GRY For other colors, consult factory. C Flush bolts & coordinators BHMA --- SR65 Door silencer - wood D Certifications Dimensions Meets ANSI/BHMA 156.16, L03021 Height: 3/4" Width: 3/8" Thickness: 1/8" (projection from frame when inserted) Material substrate Made from 60 Durometer styrene butadiene rubber Latches, catches & bolts For use on wood frames, also feature pneumatic design to cushion shock and absorb noise To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in the detail Packed in bags of 100 Finishes Substrate Rubber Finish GRY For other colors, consult factory. Stops Description Grey E25 BHMA --- SR66 Door silencer - adhesive F Certifications Dimensions Meets ANSI/BHMA 156.16, L03021 Diameter: 1/2" Thickness: 1/8" (projection from frame when inserted) Material substrate Finishes Description Brown Grey White Substrate Rubber Rubber Rubber Finish BRN GRY WHT For other colors, consult factory. Ives Architectural hardware products G BHMA ------- Miscellaneous hardware Made from 60 Durometer styrene butadiene rubber Exterior hardware Self adhesive rubber silencers Economical installation requires no drilling of frames Packed two sheets of 50 (100 minimum) E25 Crash stop Hinges & pivots CS115 Crash stop A Specially designed for full-size exterior doors Tear resistant, grey vinyl cover Heavy duty compression spring assembled to both ends of chain and end brackets Packed with sheet metal screw. Cast brass brackets with solid, welded steel chain Optional sex bolt mounting available in US26D (626) only Dimensions B Pulls &plates Bracket size: 1-9/16" x 1-9/16" Available lengths: 20-1/2" - Recommended for 30" door width (product no. CS115-20) 25-1/2" - Recommended for 36" door width (product no. CS115-25) 30-1/2" - Recommended for 42" door width (product no. CS115-30) Available accessory items Flush bolts & coordinators Sex bolt mounting available in US26D (626) only. Through bolt with cap nut mounting available in US26D (626) only Finishes G Miscellaneous hardware F Exterior hardware Stops E26 D Latches, catches & bolts C BHMA 613 626 E26 Ives Architectural hardware products Description Oil rubbed bronze Satin chrome Substrate Brass Brass Finish B10B B26D Exterior hardware Hinges & pivots Table of contents A Lock guards LG1 Lock guard with security pin............................................................................................. F2 LG7 Lock guard............................................................................................................................ F2 LG10 Lock guard.......................................................................................................................... F2 LG11 Lock guard - aluminum doors......................................................................................... F3 LG12 Lock guard - narrow.......................................................................................................... F3 LG13 Lock guard..........................................................................................................................F4 LG14 Lock guard - with electric strike.....................................................................................F4 Pulls &plates Viewers B U696 One-way viewer - UL...................................................................................................... F5 698 One-way wide angle viewer ............................................................................................ F5 U698 One-way wide angle viewer - UL................................................................................. F5 700 One-way narrow viewer ...................................................................................................F6 U700 One-way narrow viewer - UL .......................................................................................F6 701 One-way narrow viewer for thicker doors......................................................................F6 U701 One-way narrow viewer for thicker doors - UL .........................................................F6 Flush bolts & coordinators Door knockers C 02-3125 Knocker only............................................................................................................. F7 02-31251U Knocker with U700 viewer................................................................................. F7 02-31252U Knocker with U701 viewer .................................................................................. F7 Mail slots 620 Magazine size letter box plate with standard (open) back plate .........................F8 601 Sleeve for use with letter box plate ...............................................................................F8 D Latches, catches & bolts E Stops F1 Exterior hardware G Miscellaneous hardware Ives Architectural hardware products F1 Lock guards A Hinges & pivots LG1 Lock guard with security pin LG7 Lock guard B Pulls &plates LG1 incorporates security frame pin to prevent separation of the door and frame LG7 does not incorporate the security frame pin Ideal for use with mortise or cylindrical locks Unit covers the latch bolt area of the door and lock, thereby providing added protection from burglars, vandals or normal abuse Non-handed Easy installation Through bolted with carriage bolts and nuts Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel(LG1 only) or brass (LG1 only) 3" wide x 11-1/2" high Bolt center to center: 10-1/2" Flush bolts & coordinators Finishes - Steel BHMA Description Substrate Finish 600* 603* 695* Primed for paint Zinc plated Dark bronze painted Steel Steel Steel USP US2G SP313 BHMA Description Substrate Finish 606* 612* Satin brass Satin bronze Brass Brass US4 US10 C Finishes - Brass Latches, catches & bolts Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D D For other colors, consult factory. *Not available on LG7.. LG10 Lock guard E Stops Ideally suited for use with rose or escutcheon 2-3/4" wide or less For use with type 86 mortise and type 161 cylindrical locks (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000) Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel 2-1/2" wide x 9-1/2" high Stud center to center: 8-1/2" Available accessory items Exterior hardware Security pin fasteners F2 Finishes - Steel BHMA Description Substrate Finish 600 Primed for paint Steel USP Miscellaneous hardware Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D G For other colors, consult factory. F2 Ives Architectural hardware products Lock guards Dimensions 3" wide x 9-1/2" high Stud center to center: 8-1/2" B Available accessory items Pulls &plates Material substrate Made from 13 gauge stainless steel, 12 gauge steel A Designed for use on aluminum doors with latch-type locks or doors equipped with electric strikes Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point Unit is handed - Specify left or right hand when ordering 2 welded mounting studs. No exposed fasteners on face of unit Hinges & pivots LG11 Lock guard - aluminum doors Security pin fasteners Finishes - Steel BHMA Description Substrate Finish 695 Dark bronze painted Steel SP313 Description Substrate Finish 630 Satin stainless Stainless steel US32D For other colors, consult factory. Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel 1-1/2" wide x 9-1/2" high Stud center to center: 8-1/2" D Narrow design unit for use on rose or escutcheon 3-1/2" or less For use with type 86 mortise and type 161 cylinder locks (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000) Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Latches, catches & bolts LG12 Lock guard - narrow C BHMA Flush bolts & coordinators Finishes - Stainless Stops E Available accessory items Security pin fasteners Finishes - Steel BHMA Description Substrate Finish 600 Primed for paint Steel USP Description Substrate Finish 630 Satin stainless Stainless steel US32D For other colors, consult factory. F3 BHMA Exterior hardware Finishes - Stainless G Miscellaneous hardware Ives Architectural hardware products F3 Lock guards Hinges & pivots LG13 Lock guard Pulls &plates A Designed for use on all type 161 cylindrical locks (ANSI 156.2 Series 2000) Monolock and Unilock Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel 1-1/2" wide x 7" high Stud center to center: 4-1/2" B Available accessory items Security pin fasteners Flush bolts & coordinators Finishes - Steel BHMA Description Substrate Finish 600 Primed for paint Steel USP C Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D Latches, catches & bolts For other colors, consult factory. D LG14 Lock guard - with electric strike Narrow design unit for use on rose or escutcheon 3-1/2" or less. For use with Von Duprin 6210 and 6211 electric strike. No exposed fasteners on face of unit. Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point. Non-handed 4 welded mounting studs. No exposed fasteners on face of unit E Stops Material substrate Dimensions Made from 13 gauge stainless steel 2-9/16" wide x 9-1/2" high Stud center to center: 8-1/2" and 6-3/4" Available accessory items Security pin fasteners Exterior hardware Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D G Miscellaneous hardware F4 For other colors, consult factory. F4 Ives Architectural hardware products Viewers 150° angle of view For doors 1-3/8" to 2-1/16" thick Secure, tamper-resistant one-way thread installation Simple installation — only a 1/2" hole required Suggested installation height: 60" from floor A Hinges & pivots U696 One-way viewer - UL Material substrate Dimensions Meets ANSI/BHMA A156.16, L23222 UL listed 90 minute fire doors External diameter: 3/4" Pulls &plates Available accessory items B Trim washer available, 3/4" x .032" thick. Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Finishes Substrate Finish Satin brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B4 B10B B15 B-BLK B26 B26D B-643e/716 For other colors, consult factory. Latches, catches & bolts D 698 One-way wide angle viewer U698 One-way wide angle viewer - UL C Description 606 613 619 622 625 626 --- Flush bolts & coordinators BHMA 190° angle of view 4 optical glass lenses For doors 1-3/8" to 2-1/8" thick Simple installation — only a 9/16" hole required Suggested installation height: 60" from floor Available accessory items E Dimensions External diameter: 1" Lens projects 1/4" from face of door Stops Material substrate Meets ANSI/BHMA A156.16, L23222 U698 is UL listed 90 minute fire doors Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Finishes Substrate Finish 605 619* 622* 625* 626 --- Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B15 B-BLK B26 B26D B-643e/716 F5 Description Exterior hardware BHMA For other colors, consult factory. *Not available on 698. G Miscellaneous hardware Ives Architectural hardware products F5 Viewers A Hinges & pivots 700 One-way narrow viewer U700 One-way narrow viewer - UL B Pulls &plates 120° angle of view For doors 1-3/8" to 2-1/16" thick Secure, tamper-resistant one-way thread installation Simple installation—only a 1/2" hole required Suggested installation height: 60" from floor Certifications Available accessory items 700 meets ANSI/BHMA A156.16, L23173 U700 meets ANSI/BHMA A156.16, L23223 U700 is UL listed 90 minute fire doors Trim washer available, 3/4" x .032" thick. Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Material substrate Made from brass, glass lens Finishes C Flush bolts & coordinators Dimensions External diameter: 5/8" BHMA Description Substrate Finish 606 613* 619* 622* 625* 626* --- Satin brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B4 B10B B15 B-BLK B26 B26D B-643e/716 Latches, catches & bolts For other colors, consult factory. *Not available on 700. D 701 One-way narrow viewer for thicker doors U701 One-way narrow viewer for thicker doors - UL E Stops 120° angle of view For doors 2-1/8" to 2-5/8" thick Secure, tamper-resistant one-way thread installation Simple installation—only a 1/2" hole required Suggested installation height: 60" from floor Certifications Available accessory items 701 meets ANSI/BHMA A156.16, L23173 U701 meets ANSI/BHMA A156.16, L23223 U701 is UL listed 90 minute fire doors Trim washer available, 3/4" x .032" thick. Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Material substrate Made from brass, glass lens F6 Exterior hardware Finishes BHMA Description Substrate Finish 606 613* 619* 622* 625* 626* --- Satin brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B4 B10B B15 B-BLK B26 B26D B-643e/716 G Miscellaneous hardware For other colors, consult factory. *Not available on 700. F6 Ives Architectural hardware products Dimensions External diameter: 5/8" Door knockers A Hinges & pivots 02-3125 Knocker only 02-31251U Knocker with U700 viewer 02-31252U Knocker with U701 viewer 02-31251 and 02-31251U for door thickness 7/8" – 1-9/16" 02-31252 and 02-31252U for door thickness 1-5/8" – 2-1/8" Bolts through door Certifications Dimensions Meets ANSI/BHMA A156.16, L23161 Material substrate B Pulls &plates Made from forged brass Length: 5-15/16" Width: 3" Projection: 1-1/16" Mounting hole center-to-center: 3-15/16" Finishes Description Substrate Finish 605 609* 619 622 625 626 --- Bright brass Blackened brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B3 B5 B15 B-BLK B26 B26D B-643e/716 C Flush bolts & coordinators BHMA For other colors, consult factory. *B5 knockers are not available with viewer. B3 is furnished with B4(606) viewer, 716 is furnished with B10B viewer, B15 (619) is furnished with a 626 viewer. D Latches, catches & bolts E Stops F7 Exterior hardware G Miscellaneous hardware Ives Architectural hardware products F7 Mail slots Hinges & pivots 620 Magazine size letter box plate with standard (open) back plate A Spring-loaded front plate Sex bolt mounting available, order separately 09-355 – finish. Packed with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA A156.16, L26031 Overall size: 13" wide x 3-9/16" high Plate opening: 11" x 2" high Material substrate Made from brass or aluminum Flush bolts & coordinators B Pulls &plates Finishes - Brass BHMA Description Substrate Finish 605 609 619 622 625 626 --- Bright brass Blackened brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B3 B5 B15 B-BLK B26 B26D B-643e/716 C Finishes - Aluminum BHMA Description Substrate Finish 628 Clear anodized Aluminum PA28 Latches, catches & bolts For other colors, consult factory. 601 Sleeve for use with letter box plate G Miscellaneous hardware F8 Exterior hardware E Stops D F8 Ives Architectural hardware products For use on 1-3/4" hollow core doors. Prevents items falling into door 1/4" Wide strengthening rib for added durability Can be stacked thicker doors Material substrate Dimensions Made of stainless steel Overall size: 11 7/16" wide x 2 11/16" high x 1 3/4" deep Miscellaneous door hardware Hinges & pivots Table of contents A Brackets and hooks B Pulls &plates 059 Hand rail bracket................................................................................................................G2 59 Hand rail bracket...................................................................................................................G3 159 Hand rail bracket.................................................................................................................G3 405 Coat & hat hook.................................................................................................................G4 571 Coat & hat hook...................................................................................................................G4 572 Coat & hat hook..................................................................................................................G5 574 Coat & hat hook..................................................................................................................G5 575 Coat & hat hook..................................................................................................................G6 580 Ceiling hook.........................................................................................................................G6 581 Wardrobe hook.................................................................................................................... G7 582 Double wardrobe hook......................................................................................................G8 SP585 Closet pole sockets.......................................................................................................G9 SP586 Closet pole sockets.......................................................................................................G9 Decorative hooks C Flush bolts & coordinators 506 Plymouth coat & hat hook.............................................................................................G10 507 Rhodes coat & hat hook..................................................................................................G10 507B Rhodes wardrobe hook.................................................................................................G10 508 Greenwich coat & hat hook...........................................................................................G10 508C Greenwich coat & hat hook, concealed mount........................................................ G11 509C Tubular coat & hat hook, concealed mount............................................................. G11 510C Latitude coat & hat hook, concealed mount............................................................ G11 510BC Latitude wardrobe hook, concealed mount........................................................... G11 511BC Century wardrobe hook, concealed mount............................................................. G12 543 Camelot coat & hat hook................................................................................................ G12 543B Camelot wardrobe hook............................................................................................... G12 554 Century coat & hat hook................................................................................................. G13 558B Orbit wardrobe hook..................................................................................................... G13 559B Tubular wardrobe hook................................................................................................ G13 D Latches, catches & bolts Window hardware 07 Window lock......................................................................................................................... G14 90 Side window lock................................................................................................................ G14 026 Bar window lift.................................................................................................................. G15 066 Casement fastener.......................................................................................................... G15 66 Casement fastener............................................................................................................. G16 71 Casement adjuster............................................................................................................... G16 E Stops Rescue hardware 299RS Rescue strike - center..................................................................................................G17 299RB Rescue strike - offset...................................................................................................G17 299AS Emergency stop assembly - center......................................................................... G18 299AB Emergency stop assembly - offset......................................................................... G18 F Exterior hardware G1 Miscellaneous hardware Ives Architectural hardware products G1 Brackets and hooks Hinges & pivots 059 Hand rail bracket A Large faceplate for secure attachment to wall Features solid construction for increased strength Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L13061 for brass and L33061 for aluminum Brass substrate Pulls &plates Aluminum substrate Material substrate Dimensions Made from solid brass, cast aluminum, or zinc Bracket size: 1-9/16" x 1-9/16" C Flush bolts & coordinators B Finishes - Brass BHMA Description Substrate Finish 605 609 613 619 620 622 625 626 --- Bright brass Blackened brass Oil rubbed bronze Satin nickel Blackened nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B5 B10B B15 B15A B-BLK B26 B26D B-643e/716 D Latches, catches & bolts Finishes - Aluminum BHMA Description Substrate Finish 666 --668 703 669 670 672 702 673 ------- Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E E Stops Finishes - Zinc G2 Miscellaneous hardware F Exterior hardware For other colors, consult factory. G2 Ives Architectural hardware products Brackets and hooks Hinges & pivots 59 Hand rail bracket Brass substrate A Large faceplate for secure attachment to wall Features solid construction for increased strength Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16, L13061 for brass and L33061 for aluminum Aluminum base: 2-13/16" high x 1-7/16" wide Brass base: 2-15/16" high x 1-1/2" wide Base to center of rail: 2-3/4" Material substrate Finishes - Brass Description Substrate Finish 605 609 619 625 626 --- Bright brass Blackened brass Satin nickel Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B5 B15 B26 B26D B-643e/716 Finishes - Aluminum Substrate Finish Bright brass Blackened brass Oil rubbed bronze Bright nickel Satin nickel Aluminum clear coat Aged bronze Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10B A14 A15 A92 A-643e/716 For other colors, consult factory. D Latches, catches & bolts Description 666 --703 669 670 673 --- C BHMA Flush bolts & coordinators BHMA B Aluminum substrate Pulls &plates Made from cast brass or cast aluminum 159 Hand rail bracket For use on commercial applications Exceeds OSHA and BHMA strength test requirements Packed with fasteners for masonry and wood applications Material substrate E Dimensions Base diameter: 3-1/8" Base to rail center: 3-1/8" Stops Certifications Meets ANSI/BHMA 156.16, L33081 Made from cast aluminum Finishes - Aluminum Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum US3AL US27 F For other colors, consult factory. Exterior hardware BHMA G3 Miscellaneous hardware Ives Architectural hardware products G3 Brackets and hooks Hinges & pivots 405 Coat & hat hook A Wide body design is ideal for public buildings, schools, dormitories, etc., where hook must withstand unusual stress and strain Certifications Meets ANSI/BHMA 156.16, L33113 Material substrate Dimensions Made from cast aluminum Base: 1-1/2" high x 7/8" wide Projection: 2-1/2" Flush bolts & coordinators B Pulls &plates Finishes - Aluminum Description Substrate Finish 666 667 --668 703 669 673 Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A4 A5 A10 A10B A14 A92 C For other colors, consult factory. 571 Coat & hat hook All-purpose hook in traditional design Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L13113 for brass and L33113 for aluminum Brass substrate D Latches, catches & bolts BHMA Material substrate Dimensions Made from cast brass and cast aluminum Base: 1-3/4" high x 1-3/16" wide Projection: 3" Finishes - Brass E Stops Aluminum substrate BHMA Description Substrate Finish 605 606 609 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10B B15 B-BLK B26 B26D B-643e/716 Miscellaneous hardware F Exterior hardware Finishes - Aluminum BHMA Description Substrate Finish 666 --668 669 670 672 702 673 ------- Bright brass Blackened brass Satin bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E G4 Finishes - Zinc For other colors, consult factory. G4 Ives Architectural hardware products Brackets and hooks A All-purpose hook in traditional design Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L13113 for brass and L33113 for aluminum Material substrate Dimensions Made from cast brass and cast aluminum Brass base: 1-1/2" high x 1-1/4" wide Projection: 3-1/8" Finishes - Brass Brass substrate Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10 B10B B15 B26 B26D Description Substrate Finish 666 --668 703 669 670 673 Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A10B A14 A15 A92 For other colors, consult factory. D Latches, catches & bolts BHMA C Finishes - Aluminum Flush bolts & coordinators Description 605 606 609 612 613 619 625 626 B BHMA Pulls &plates Aluminum substrate Hinges & pivots 572 Coat & hat hook 574 Coat & hat hook Decorative design is ideal for commercial and residential installations Packaged with fasteners for wood applications Material substrate Made from cast brass and cast aluminum Base: 1-5/8" high x 1-3/4" wide Projection: 3-3/4" Overall height, brass: 4-3/4" Overall height, aluminum: 5" E Dimensions Stops Certifications Meets ANSI/BHMA 156.16, L13113 for brass and L33113 for aluminum Finishes - Brass Substrate Finish 605 606 612 613 619 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass B3 B4 B10 B10B B15 B26 B26D F Description Exterior hardware BHMA Finishes - Aluminum Substrate Finish Bright brass Bright chrome Aluminum clear coat Aluminum Aluminum Aluminum A3 A26 A92 For other colors, consult factory. Ives Architectural hardware products G5 Description 666 627 673 Miscellaneous hardware BHMA G5 Brackets and hooks Hinges & pivots 575 Coat & hat hook A Especially designed to accommodate large hats Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16, L33121 Base: 2-1/4" high x 1-3/8" wide Projection: 3-5/8" Overall height: 5-3/4" Material substrate Made from cast aluminum B Pulls &plates Finishes - Aluminum BHMA Description Substrate Finish 666 703 673 Bright brass Oil rubbed bronze Aluminum clear coat Aluminum Aluminum Aluminum A3 A10B A92 Flush bolts & coordinators For other colors, consult factory. 580 Ceiling hook C Ideal for use in closets, attached to underside of shelves, or in storage lockers Packaged with fasteners for wood applications Material substrate Dimensions Made from cast aluminum Base: 1" high x 1-7/8" wide Projection: 2-1/4" D Latches, catches & bolts Finishes - Aluminum BHMA Description Substrate Finish 666 --668 669 670 672 702 673 ----- Bright brass Blackened brass Satin bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A14 A15 A26 A26D A92 A-643e/716 A-BLK G6 Miscellaneous hardware F Exterior hardware E Stops For other colors, consult factory. G6 Ives Architectural hardware products Brackets and hooks A Material substrate Hinges & pivots 581 Wardrobe hook Compact hook is perfect where space is limited, such as behind doors where low profile is needed. Packaged with fasteners for wood applications Made from cast brass, cast aluminum, or zinc Dimensions B Base, brass/aluminum: 1-1/4" high x 1-1/4" wide Base, zinc: 1-1/2" high x 3/4" wide Projection, brass: 1-11/16" Projection, Aluminum, zinc: 1-5/8" Pulls &plates Finishes - Brass Substrate Finish Bright brass Satin brass Blackened brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10B B15 B-BLK B26 B26D B-643e/716 Finishes - Aluminum Substrate Finish Bright brass Blackened brass Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E D Description 666 --669 670 672 702 673 ------- Latches, catches & bolts BHMA C Description 605 606 609 613 619 622 625 626 --- Flush bolts & coordinators BHMA Finishes - Zinc E Stops For other colors, consult factory. F Exterior hardware G7 Miscellaneous hardware Ives Architectural hardware products G7 Brackets and hooks Hinges & pivots 582 Double wardrobe hook A Compact double hook is perfect where space is limited, such as behind doors where low profile is needed Packaged with fasteners for wood applications Material substrate Made from cast brass, cast aluminum, or zinc Dimensions B Pulls &plates Base, brass: 1-1/8" high x 1-1/4" wide Base, aluminum: 1-1/16" high x 1-3/16 wide Base, zinc: 1-5/8" high x 7/8" wide Projection, brass: 1" Projection, aluminum, zinc: 1-3/32" C Flush bolts & coordinators Finishes - Brass BHMA Description Substrate Finish 605 606 609 612 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10 B10B B15 B-BLK B26 B26D B-643e/716 E Stops D Latches, catches & bolts Finishes - Aluminum BHMA Description Substrate Finish 666 --668 669 670 672 702 673 ------- Bright brass Blackened brass Satin bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E Finishes - Zinc G8 Miscellaneous hardware F Exterior hardware For other colors, consult factory. G8 Ives Architectural hardware products Brackets and hooks Hinges & pivots SP585 Closet pole sockets Flange design prevents accidental knock out of pole Accommodates pole or pipe with outside diameter of 1-3/8" Packed in pairs Packaged with fasteners for wood applications A Material substrate Made from wrought steel Finishes Description Substrate Finish 632 Bright brass Steel F3 B Pulls &plates BHMA SP586 Closet pole sockets Single screw mounting Accommodates pole or pipe with outside diameter of 1-3/8" Packed in pairs Packaged with fasteners for wood applications C Material substrate Flush bolts & coordinators Made from a heavy duty plastic for long life and extra strength Finishes BHMA Description Substrate Finish ---* White Plastic P D Latches, catches & bolts *Only available in Slim-Pak of 25. E Stops F Exterior hardware G9 Miscellaneous hardware Ives Architectural hardware products G9 Decorative hooks Hinges & pivots 506 Plymouth coat & hat hook A Decorative design is ideal for all installations Design complements Plymouth Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications Certifications Dimensions Meets ANSI/BHMA 156.16 Material substrate Pulls &plates Made from brass Base: 2" high x 1/2" wide Projection: 2" Overall height: 5-1/4" Overall width: 4-3/4" B See finishes below 507 Rhodes coat & hat hook C Flush bolts & coordinators Decorative design is ideal for all installations Design complements Rhodes Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2- 5/16" high x 1/2" wide Projection: 3-1/2" Overall height: 4-1/2" Material substrate Made from brass See finishes below Latches, catches & bolts 507B Rhodes wardrobe hook D Decorative design is ideal for all installations Design complements Rhodes Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2- 5/16" high x 1/2" wide Projection: 1-15/16" Material substrate Made from brass Stops See finishes below E 508 Greenwich coat & hat hook Exterior hardware Decorative design is ideal for all installations Design complements Greenwich Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 1-1/2" wide Projection: 3-5/16" Overall height: 5-1/2" F Material substrate Made from brass See finishes below G10 Miscellaneous hardware 506, 507, 507B and 508 Finishes BHMA Description Substrate Finish 605 613 619 622 625 626 --- Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass 605 613 619 BLK 625 626 643e/716 For other colors, consult factory. G10 Ives Architectural hardware products Decorative hooks Decorative design is ideal for all installations Design complements Greenwich Series pulls and levers Concealed mount - packaged with set screw Packaged with fasteners for wood/drywall applications A Hinges & pivots 508C Greenwich coat & hat hook, concealed mount Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 1-1/2" wide Projection: 3-11/16" Overall height: 5-1/2" Material substrate Pulls &plates Made from brass See finishes below B 509C Tubular coat & hat hook, concealed mount Decorative design is ideal for all installations Design complements Tubular Series pulls and levers Concealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications Dimensions Base: 1-15/16" diameter Projection: 3-1/4" Overall height: 5-11/16" Material substrate Made from brass See finishes below Decorative design is ideal for all installations Design complements Latitude Series pulls and levers Concealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 1-15/16" diameter Projection: 3-3/4" Overall height: 5-11/16" Material substrate Made from cast brass D Latches, catches & bolts 510C Latitude coat & hat hook, concealed mount C Certifications Meets ANSI/BHMA 156.16 Flush bolts & coordinators See finishes below E Stops 510BC Latitude wardrobe hook, concealed mount Decorative design is ideal for all installations Design complements Latitude Series pulls and levers Concealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications Material substrate Made from cast brass See finishes below Description Substrate Finish 605 613 619 622 625 626 --- Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass 605 613 619 BLK 625 626 643e/716 G11 BHMA Miscellaneous hardware 508C, 509C, 510C and 510BC Finishes F Dimensions Base: 1-15/16" diameter Projection: 3-1/4" Exterior hardware Certifications Meets ANSI/BHMA 156.16 For other colors, consult factory. Ives Architectural hardware products G11 Decorative hooks Hinges & pivots 511BC Century wardrobe hook, concealed mount A Decorative design is ideal for all installations Design complements Century Series Pulls and Levers Concealed mount Pre-installed fastener for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 1" high x 3/4" wide Projection: 1-1/2" Material substrate Pulls &plates Made from cast brass Flush bolts & coordinators B Finishes BHMA Description Substrate Finish 605 613 619 622 625 626 --- Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass 605 613 619 BLK 625 626 643e/716 C For other colors, consult factory. 543 Camelot coat & hat hook D Latches, catches & bolts Decorative design is ideal for all installations Design complements Camelot Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 13/16" wide Projection: 2-1/2" Overall height: 5-1/2" Material substrate Made from stainless steel See finishes below 543B Camelot wardrobe hook E Stops Decorative design is ideal for all installations Design complements Camelot Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 13/16" wide Projection: 1-11/16" Material substrate Exterior hardware Made from stainless steel F See finishes below Miscellaneous hardware 543 and 543B Finishes BHMA Description Substrate Finish 629 630 Bright stainless Satin stainless Stainless steel Stainless steel US32 US32D G12 For other colors, consult factory. G12 Ives Architectural hardware products Decorative hooks Hinges & pivots 554 Century coat & hat hook Decorative design is ideal for all installations Design complements Century Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications A Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" Diameter Projection: 4-1/4" Overall height: 4-7/8" Material substrate Finishes Substrate Finish Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass 605 619 BLK 625 626 643e/716 For other colors, consult factory. C Flush bolts & coordinators Description 605 619 622 625 626 --- B BHMA Pulls &plates Made from cast brass 558B Orbit wardrobe hook Decorative design is ideal for all installations Design complements Orbit Series pulls and levers Concealed mount - packaged with set screw Packaged with fasteners for wood/drywall applications Dimensions Base: 3-5/8" high x 3/4" wide Projection: 2-7/8" Material substrate Made from brass See finishes below D Certifications Meets ANSI/BHMA 156.16 Latches, catches & bolts 559B Tubular wardrobe hook Decorative design is ideal for all installations Design complements Tubular Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications E Stops Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" Diameter Projection: 1-5/16" Material substrate See finishes below F Exterior hardware Made from brass 558B and 559B Finishes Substrate Finish Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass 605 613 619 BLK 625 626 643e/716 For other colors, consult factory. Ives Architectural hardware products G13 Description 605 613 619 622 625 626 --- Miscellaneous hardware BHMA G13 Window hardware Hinges & pivots 07 Window lock A Designed low to the sash for superior strength and greater resistance to breakage Vertical and horizontal camming action for snug, non-rattling fit Heavy gauge springs provide long-wearing action Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16, L33121 Base: 15/16" x 2-9/16" Strike: 5/8" x 2-9/16" Material substrate Pulls &plates Made from cast brass or aluminum Flush bolts & coordinators B Finishes - Brass BHMA Description Substrate Finish 605 619 622 625 626 --- Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B15 B-BLK B26 B26D B-643e/716 D Latches, catches & bolts C Finishes - Aluminum BHMA Description Substrate Finish 666 ---* 703 669 670 672 702 673 ------- Bright brass Blackened brass Oil rubbed bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W E Stops For other colors, consult factory. *Only available in Slim-Pak of 25. 90 Side window lock May be used singularly for small windows or in pairs for large windows Cam action eliminates rattles and holds window firmly in desired position Packaged with fasteners for wood applications Exterior hardware Certifications F Meets ANSI/BHMA 156.16 Material substrate Dimensions Made from aluminum 1-3/4" high x 1-1/8" wide Finishes - Aluminum BHMA Description Substrate Finish 666 Bright brass Aluminum A3 G14 Miscellaneous hardware For other colors, consult factory. G14 Ives Architectural hardware products Window hardware Hinges & pivots 026 Bar window lift A Facilitates opening of window in a safe manner Can also be used as a drawer or utility pull Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16 Dimensions Base: 1-1/8" high x 4" wide Projection: 1-1/16" Finishes - Brass Substrate Finish Bright brass Blackened brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B3 B5 B15 B-BLK B26 B26D B-643e/716 Finishes - Aluminum Finish 666 --669 670 672 702 673 ------- Bright brass Blackened brass Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W For other colors, consult factory. D Substrate Latches, catches & bolts Description C BHMA Flush bolts & coordinators Description 605 609 619 622 625 626 --- B BHMA Pulls &plates Material substrate Made from solid brass or aluminum 066 Casement fastener E For use on windows to provide weather-tight fastening and security Also ideal for securing louvered doors and small doors Packaged with three strikes: Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) Packaged with fasteners for wood applications Stops Certifications Meets ANSI/BHMA 156.16 Rim Strike (RS) Mortise Strike (MS) Dimensions Base: 1-5/8" x 7/8" Projection: 1-3/8" Finishes - Brass Description Substrate Finish 605 609 619 625 626 Bright brass Blackened brass Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass B3 B5 B15 B26 B26D Description Substrate Finish 666 --703 669 673 Bright brass Blackened brass Oil rubbed bronze Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10B A14 A92 G15 BHMA Miscellaneous hardware Finishes - Aluminum F BHMA Exterior hardware Surface Strike (SS) Material substrate Made from solid brass or aluminum For other colors, consult factory. Ives Architectural hardware products G15 Window hardware Hinges & pivots 66 Casement fastener A For use on windows to provide weather-tight fastening and security Also ideal for securing louvered doors and small doors Packaged with three strikes: Surface Strike (SS), Rim Strike (RS), or Mortise Strike (MS) Packaged with fasteners for wood applications Certifications Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) Flush bolts & coordinators B Pulls &plates Meets ANSI/BHMA 156.16 Material substrate Dimensions Made from solid brass or aluminum Base: 2-1/16" high x 1-1/16" wide Projection: 1-7/8" Finishes - Brass BHMA Description Substrate Finish 605 609 619 625 626 --- Bright brass Blackened brass Satin nickel Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B5 B15 B26 B26D B-643e/716 C Finishes - Aluminum BHMA Description Substrate Finish 666 --669 673 Bright brass Blackened brass Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A92 D Latches, catches & bolts For other colors, consult factory. 71 Casement adjuster Securely holds casement window in any position. Can also be used to hold cabinet lids and drafting table tops in various positions. Available in 10" and 12" lengths. Packaged with fasteners for wood applications Certifications E Stops Meets ANSI/BHMA 156.16 Material substrate Made from burnished steel or solid brass Dimensions Tube: 3/8" x 5/8" Projection: 1" F Exterior hardware Sash plate: Brass: 1-5/8" high x 5/8" wide Steel: 2 x 5/8" wide Sill plate: 2-1/4" x 15/16" wide G16 Miscellaneous hardware Finishes G16 Ives Architectural hardware products BHMA Description Substrate Finish 605 625 Bright brass Bright chrome Brass Brass B3 B26 Rescue hardware Material substrate Stainless Steel BHMA Description Substrate Finish 630 Stainless steel Stainless 630 C Flush bolts & coordinators Finishes B Dimensions 7" Strike: 6.75 x 2.75 Used with 5 3/4" Frame 8" Strike: 7.75 x 2.75 Used with 6 3/4" Frame Pulls &plates Certifications Meets ANSI/BHMA A1882 A Ives rescue hardware was specifically designed to address a problem often encountered by healthcare professionals—a blocked doorway caused by an incapacitated patient. Must be used with center hung pivots such as Ives models: 7253, 7255, 7255J, 7256, and 7259 Center or offset mounting styles 7" Strike fits 5-3/4" frame and 8" Strike fits 6-3/4" frames Fits 1 3/4" door thickness. Custom sizes available, consult factory Cannot be used with deadbolt applications May not work with certain mortise lock configurations, consult factory for Schlage and Falcon lock compatibility Packed with fasteners for hollow metal applications Hinges & pivots 299RS Rescue strike - center 299RB Rescue strike - offset For other colors, consult factory. Rescue strike only Center D Latches, catches & bolts Offset E Stops F Exterior hardware G17 Miscellaneous hardware Ives Architectural hardware products G17 Rescue hardware A Hinges & pivots 299AS Emergency stop assembly - center 299AB Emergency stop assembly - offset B Pulls &plates Ives rescue hardware was specifically designed to address a problem often encountered by healthcare professionals—a blocked doorway caused by an incapacitated patient. Must be used with center hung pivots such as Ives models: 7253, 7255, 7255J, 7256, and 7259 Center or offset mounting styles 7" Strike fits 5-3/4" frame and 8" Strike fits 6-3/4" frames Fits 1 3/4" door thickness. Custom sizes available, consult factory Available with emergency release and strike in the following sizes: 7" center, 8" center, 7" offset, and 8" offset Cannot be used with deadbolt applications May not work with certain mortise lock configurations, consult factory for Schlage and Falcon lock compatibility Packed with fasteners for hollow metal applications Certifications Dimensions Meets ANSI/BHMA A1882 7" Strike: 6.75 x 2.75 Used with 5 3/4" Frame 8" Strike: 7.75 x 2.75 Used with 6 3/4" Frame Flush bolts & coordinators Material substrate Stainless Steel Available Accessory Items C 299AL Emergency stop latch assembly 299ES Emergency stop strike plate Centered (7" and 8") 299EB Emergency stop strike plate Offset (7" and 8") Latches, catches & bolts Finishes BHMA Description Substrate Finish 630 Stainless steel Stainless 630 D For other colors, consult factory. How it works Fig. 1 Fig. 2 E Stops Door Sliding stop Fig. 3 Door Door Travel Travel Lever push to retract Offset F Exterior hardware Emergency stop assemblies Center Miscellaneous hardware Mortise latch assembly 4.500(114.30) .134(3.40) G18 3.250(82.55) 1.250(31.75) 1.000(25.40 1.625(41.28) 2.563(65.09) G18 Ives Architectural hardware products Notes A Hinges & pivots B Pulls &plates C Flush bolts & coordinators D Latches, catches & bolts E Stops F Exterior hardware G19 Miscellaneous hardware G19 Ives Architectural hardware products A Hinges & pivots Index by product description A H R Angle stop, D11 Automatic wall holder, E15 Auxiliary pusher, D12 Handrail bracket, G2-G3 Hinge pin stop, E22-E24 Hinges 3 knuckle, full mortise, A5-A8 5 knuckle, full mortise, A10-A15 continuous geared full mortise, A23-A26, A31-A33, A36, A37 full surface, A34, A35 half surface, A27-A30 continuous pin & barrel full mortise, A43, A44, A46, A49, A50 full surface, A45 swing clear, A47, A48 pocket, A72, A73 residential, A16 spring, A9 Hook ceiling, G6 coat & hat, G4-G6, G10-G13 wardrobe, G8, G10-G13 Rescue hardware , G17, G18 Riser , E2, E3 Roller bumper , E18 Roller catch , D15 Roller latch D8-D10 B C Carry bar, C14 Casement adjuster, G16 Casement fastener, G15, G16 Chain door guard, D7 Closet pole socket, G9 Constant latching flush bolt, C5 Coordinator bar, C19 filler bar, C20 gravity, C23 mounting bracket, C21-C22 Crash stop, E26 K E P Elbow catch, D17 Pivot 1 1/2" offset, A61, A62 3/4" offset, A54-A60 center hung, A67-A71 intermediate, A63-A65 electrified, A66 pocket, A72 electrified, A73 Plunger door holder, E17 Pocket sliding door bolt, B63 Protection plates, B47 Pull architectural, B11-B17 decorative, B23-B37 Pull plate, B41-B45 Push bar , B18 with pull , B19-B22 Push plate , B41 Flexible door stop, E19, E21 Floor stop, E2-E6 & automatic holder, E7 & manual holder, E8 & semi-automatic holder, E7 Flush bolts automatic, C2-C5 constant latching, C6-C9 manual, C10-C15 Flush pull, B57-B59 decorative, B60-B62 E Stops Door base stop, E20, E21 Door bolt dutch, D6 mortise, D6 Door guard chain, D7 solid bar, D7 Door knocker, F7 Door pull, B2, B3, B4, B5 offset, B5 Door silencer, E25 Dust proof strike, C16 F F I Invisible latch, D12 D Exterior hardware D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates Ball catch, D13 adjustable, D16 dual adjustable, D16, D17 G Miscellaneous hardware G 242 Ives Architectural hardware products Kick down holder, E15, E16 L Lock guard, F2-F4 Long door pull, B38, B39 M Magnetic catch, D14 Mail slots, F8 N S Screen door pull, B65 Side window lock, G7 Slide door edge pull, B63 Sliding door pull, B64, B65 Strike plate, D10 Surface bolt, D2-D5 V Vandal resistant trim, B48-B56 Viewer, F5, F6 W Wall bumper, E11, E12 Wall holder automatic, E14 manual, E13 Wall stop, E9, E10 Window bar lift, G15 lock, G14 Numerical part index C Flush bolts & coordinators D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B FS497, E8 FS544, E16 FS555, E16 FS1153, E17 FS1154, E17 LG1, F2 LG7, F2 LG10, F2 LG11, F3 LG12, F3 LG13, F4 LG14, F4 MB1, C21 MB1F, C22 MB1V, C22 MB2, C21 MB2F, C22 MB2V, C22 MB3F, C22 MB3V, C22 R14, E2 R435, E3 R437, E3 RB470, E18 RB471, E18 RB472, E18 RL30, D8 RL30A, D8 RL32, D8 RL32A, D8 RL36, D9 RL36A, D9 RL38, D9 RL1152, D10 S48, D6 SB360, D2 SB453, D2 SB1601M1, D4 SB1601M2, D4 SB1630, D3 SB1640, D3 SR64, E25 SR65, E25 SR66, E25 STK685, D10 STK685L, D10 U696, F5 U698, F5 U700, F6 U701, F6 VR810-DT, B48 VR810-NL, B49 VR810-NL-V, B50 VR814-DT, B48 VR814-NL, B49 VR814-NL-V, B50 VR900, B51 VR900LLP, B52 VR904, 51 VR904LLP, 52 VR910-DT, B53 VR910-NL, B54 VR910M-DT, B55 VR910M-NL, B56 VR914-DT, B53 VR914-NL, B54 VR914M-DT, B55 VR914M-NL, B56 WS11, E9 WS11X, E9 WS20, E9 WS20X, E9 WS33, E10 WS33X, E10 WS40, E14 WS45, E14 WS45X, E14 WS65, E10 WS401/402, E11 WS404CVX, E11 WS406/407, E12 WS443, E13 WS445, E13 WS447, E13 WS449, E13 Pulls & plates 8281, B28 8300, B41 8302, B42 8303, B43 8305, B44 8311, B45 8312, B29 8320, B30 8371, B31 8372, B32 8373, B33 8400, B47 8402, B47 8700, B34 8800, B35 8848, B36 8975, B37 9100HD, B18 9103EZHD, B19 91105F, A72 9145EZHD, B20 919, B60 9190EZHD, B22 9190HD, B21 9264, B39 9266, B39 AS18, D11 AS895, D11 CB1, C124 CL11, D12 CL12, D12 CL14, D12 CL21, D13 CL21A, D13 CL22, D13 COR7G, C23 COR9G, C23 COR32, C19 COR42, C19 COR52, C19 COR60, C19 COR72, C19 CS115, E26 DP1, C16 DP2, C16 E91105F, A73 FB31, C2 FB32, C3 FB33, C3 FB41, C4 FB42, C5 FB51, C6 FB52, C7 FB53, C7 FB61, C8 FB62, C9 FB358, C13 FB457, C14 FB458, C15 FL20, C20 FL32, C20 FL44, C20 FS9, E7 FS13, E2 FS17, E2 FS18L, E5 FS18S, E5 FS40, E7 FS41, E7 FS42, E7 FS43, E7 FS410, E4 FS434, E5 FS436, E3 FS438, E3 FS439, E4 FS441, E6 FS444, E6 FS446, E8 FS448, E6 FS450, E8 FS452, E15 FS455, E16 FS495, E8 FS496, E8 A 508, G10 508C, G11 509C, G11 510BC, G11 510C, G11 511BC, G12 543, G12 543B, G12 554, G13 558B, G13 559B, G13 571, G4 572, G5 574, G5 575, G6 580, G6 581, G7 582, G8 585, G9 586, G9 600, A43 601, F8 602, A45 611, A47 620, F8 698, F5 700, A43 700, F6 700CS, A44 701, F6 702, A45 705, A46 711, A47 711CS, A48 715, A49 715CS, A50 950, B60 955, B61 960, B61 962, B62 990, B64 991, B65 1010, A16 1011, A16 1012, A16 1020, A16 1021, A16 7212, A54 7212-7212V-7222 INT, A63 7212V, A54 7215, A55 7215-7226-7227 INT, A64 7215F, A55 7215F-7226F-7227F INT, A64 7215PT-7226PT-7227PT, A66 7222, A56 7226, A57 7226F, A57 7227, A58 7227F, A58 7230F, A59 7230F-7237F INT, A65 7237F, A60 7244F, A61 7244F-7245F INT, A65 7245F, A62 7253, A67 7255, A68 7255J, A69 7256, A70 7259, A71 8102HD, B11 8103EZHD, B13 8103HD, B12 8105, B14 8111-5, B23 8112-5, B23 8121, B24 8145EZHD, B15 8169, B25 8181, B26 8189, B27 8190EZHD, B17 8190HD, B16 8200, B41 Hinges & pivots 02-3125, F7 07, G14 026, G15 026XY, A23 027XY, A24 040XY, A25 041XY, A26 045XY, A27 046XY, A28 053XY, A29 054, D6 054XY, A30 059, G2 060, E19 061, E19 066, G15 2, D17 22, B57 25, B65 3CB1, A6 3CB1HW, A7 3CB1WT, A8 3PB1, A5 3SP1, A9 40, D5 42, B63 59, G3 5BB1, A11 5BB1BSC, A14 5BB1BSCHW, A15 5BB1HW, A12 5BB1SC, A14 5BB1SCHW, A15 5BB1WT, A13 5PB1, A10 60, E20 61, E20 63, E21 64, E21 66, G16 69, E22 70, E23 71, G16 72, E24 73, E24 90, G14 112HD, A31 112XY, A32 114XY, A33 157XY, A34 159, G3 210XY, A35 218, B57 221, B58 222, B58 223, B59 224HD, A36 224XY, A37 227, B59 230, B63 253, D5 261, C10 262, C11 265, C12 299AB, G18 299AS, G18 299RB, G17 299RS, G17 325, D14 326, D14 327, D14 330, D15 335, D15 336, D15 345, D16 347, D16 349, D17 405, G4 411R, E12 430, E5 481, D7 482, D7 506, G10 507, G10 507B, G10 243 About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com © 2018 Allegion 005313, Rev. 09/18 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36 Create Date : 2018:10:04 11:08:09-05:00 Metadata Date : 2018:10:04 11:11:43-05:00 Modify Date : 2018:10:04 11:11:43-05:00 Creator Tool : Adobe InDesign CC 13.0 (Macintosh) Instance ID : uuid:382c1af5-d311-ee4a-a32e-c4a1eb9844fe Original Document ID : xmp.did:5c7d8c15-cb0b-4b03-a52b-c29c94d8aef5 Document ID : xmp.id:2b90db8b-fc55-439e-933e-cb4a8e9a4761 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:c17ce22a-149b-478d-9e83-c3eabb513826 Derived From Document ID : xmp.did:b74e16a7-f6c2-4dd1-8191-38946c97314f Derived From Original Document ID: xmp.did:5c7d8c15-cb0b-4b03-a52b-c29c94d8aef5 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.0 (Macintosh) History Changed : / History When : 2018:10:04 11:08:10-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 244 Creator : Adobe InDesign CC 13.0 (Macintosh)EXIF Metadata provided by EXIF.tools