Ives 2021 Product Catalog Architectural Hardware Products 105313 1
User Manual: Ives 2021 Ives Product Catalog Catalog
Open the PDF directly: View PDF 
.
Page Count: 248
| Download | |
| Open PDF In Browser | View PDF |
Architectural hardware products Table of contents A Hinges & pivots Finish chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Packaging, Handing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi A - Hinges and pivots Architectural hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2 Continuous hinges - aluminum geared. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A17 Continuous hinges - pin and barrel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A38 Pivots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A52 B -Pulls and push plates B Pulls & plates Architectural pulls and pushbars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2 Decorative pulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B23 Long door pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B38 Hands-free door pulls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B40 Push and pulls plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B44 Protection plates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B50 Edge guards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B52 Vandal resistant trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B56 Flush pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B65 Decorative flush pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B68 Sliding door pulls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B71 Screen door pull. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B73 C Flush bolts & coordinators C - Flush bolts & coordinators Latches, catches & bolts Automatic flush bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C2 Constant latching flush bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C6 Manual flush bolts and dust proof strikes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C10 Coordinators - bar, gravity, carry bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C17 D D - Latches, catches & bolts Surface bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D2 Door guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D7 Roller latches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D8 Angle stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D11 Latches/catches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D12 E - Stops E Stops Floor stops and holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E2 Wall stops/bumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E9 Wall holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E13 Kick down holders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E15 Plunger door holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E17 Roller bumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E18 Residential door stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E19 Door silencers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E25 Crash stops. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E26 Exterior hardware F F - Exterior hardware Lock guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F2 Viewers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F5 Door knockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F7 Mail slots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F8 Miscellaneous hardware G - Miscellaneous hardware G Brackets & hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G2 Decorative hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G10 Window hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G14 Rescue hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G17 Index by product description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 by part number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 Ives Architectural hardware products iii G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A Hinges & pivots Finishes IVES Finish ANSI/BHMA US Number Finish description Base material A3 666 US3 Bright brass, clear coat Aluminum A4 667 US4 Satin brass, clear coat Aluminum A5 --- US5 Brass, blackened, satin relieved Aluminum A10 668 US10 Satin bronze, clear coat Aluminum A10B 703 US10B Dark bronze, oil rubbed Aluminum A14 669 US14 Bright nickel, clear coat Aluminum A15 670 US15 Satin nickel, clear coat Aluminum A26 672 US26 Bright chrome Aluminum A26D 702 US26D Satin chrome Aluminum A-643E/716 --- --- Aged bronze, blackened, edge relieved Aluminum A92 673 --- Aluminum clear coat Aluminum A-BLK --- --- Matte black Aluminum A-W --- --- White Aluminum US27 627 US27 Satin aluminum, clear coated Aluminum 441 441 --- Satin stainless anodized Aluminum PA28 628 US28 Satin aluminum, clear anodized Aluminum 688 688 --- Satin brass anodized Aluminum 709 709 --- Satin bronze anodized Aluminum 710 710 313AN Dark bronze anodized Aluminum 711 711 315AN Black anodized Aluminum 712 712 --- Bright chrome anodized Aluminum 713 713 --- Satin chrome anodized Aluminum B3 605 US3 Bright brass, clear coat Brass/Bronze B4 606 US4 Satin brass, clear coat Brass/Bronze B5 609 US5 Satin brass, blackened, satin relieved Brass/Bronze B9 611 US9 Bright bronze, clear coat Brass/Bronze B10 612 US10 Satin bronze, clear coat Brass/Bronze B10B 613 US10B Dark bronze, oil rubbed Brass/Bronze 614 614 US10A Satin bronze, relieved, clear coated Brass/Bronze 616 616 US11 Satin bronze, blackened, clear coated Brass/Bronze B14 618 US14 Bright nickel, clear coat Brass/Bronze B15 619 US15 Satin nickel, clear coat Brass/Bronze B15A 620 US15A Satin nickel, blackened, satin relieved Brass/Bronze B26 625 US26 Bright chrome Brass/Bronze B26D 626 US26D Satin chrome Brass/Bronze US26D-AM --- --- Satin chrome, antimicrobial coating Brass/Bronze B-643E/716 --- --- Aged bronze, blackened, edge relieved Brass/Bronze B-BLK 622 US19 Matte black Brass/Bronze US2G 603 US2G Zinc plated Steel F2C 604 US2C Zinc plated Steel F3 632 US3 Bright brass, clear coat Steel F4 633 US4 Satin brass, clear coat Steel F5 638 US5 Satin brass, blackened, satin relieved Steel F10 639 US10 Satin bronze, clear coat Steel F10B 640 US10B Dark bronze, oil rubbed Steel 641 641 US10A Oxidized brz, relieved, clear coated Steel 643 643 US11 Satin brz, blackened, relieved, clear Steel F14 645 US14 Bright nickel, clear coat Steel F15 646 US15 Satin nickel, clear coated Steel F15A 647 US15A Satin nickel, blackened, relieved, clear Steel F26 651 US26 Bright chrome Steel F26D 652 US26D Satin chrome Steel F-643E/716 --- --- Aged bronze, blackened, edge relieved Steel F-BLK 631 US19 Matte black Steel F-W --- --- White Steel SP4 706 --- Dull brass painted All SP10 691 --- Dull bronze painted All iv Ives Architectural hardware products Finishes --- Dark bronze painted All SPBLK 622 --- Matte black All USP 600 USP Primed for paint All US32 629 US32 Bright stainless steel Stainless steel US32-316 629-316 US32-316 Bright stainless steel - 316 series Stainless steel - 316 US32D 630 US32D Satin stainless steel Stainless steel US32D-316 630-316 US32D-316 Satin stainless steel - 316 series Stainless steel - 316 US32D 654 --- Satin stainless steel Stainless steel US32D-AM --- --- Satin stainless, antimicrobial coating Stainless steel Z605 677 US3 Bright brass, clear coat Zinc 678 678 US4 Satin brass, clear coat Zinc Z609 --- US5 Satin brass, blackened, satin relieved Zinc Z613 704 US10B Dark bronze, oil rubbed Zinc Z619 --- US15 Satin nickel, clear coat Zinc Z625 681 US26 Bright chrome Zinc 682 --- US26D Satin chrome Zinc Z-643E/716 --- --- Aged bronze, blackened, edge relieved Zinc Z-BLK --- --- Matte black Zinc Z-W --- --- White Zinc CLR --- --- Clear Plastic BLK --- --- Matte black Rubber or plastic WHT --- --- White Rubber or plastic GRY --- --- Grey Rubber TAN --- --- Tan Rubber D Latches, catches & bolts 695 C All SP313 Flush bolts & coordinators Base material Aluminum painted B Finish description --- Pulls & plates US Number 689 A ANSI/BHMA SP28 Hinges & pivots IVES Finish E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products v Packaging key Many Ives items are available in a variety of packaging forms designated by a prefix. The Ives Price Book contains the specific packaging options for each Ives product. Below is a description of these options. Symbol Description of package SP Slim-Pak Door handing LH INSIDE Left hand RH Right hand OUTSIDE INSIDE C Flush bolts & coordinators B Pulls & plates A Hinges & pivots Packaging, Handing G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts LHR Left hand reverse vi Ives Architectural hardware products RHR Right hand reverse Architectural hinges, continuous hinges and pivots Hinges & pivots Table of contents C Flush bolts & coordinators Pivots General information................................................................................................................ A52 How to order............................................................................................................................. A53 7212 3/4" Offset pivot, 200lb with top header mount................................................... A54 7212V 3/4" Offset pivot, 200lb with top jamb mount.................................................... A54 7215 3/4" Offset pivot, 500lb with top header mount................................................... A55 7215F 3/4" Offset pivot, 500lb with top header mount, fire rated............................. A55 7222 3/4" Offset pivot, 200lb with top header mount and bottom base mount.... A56 7226 3/4" Offset pivot, 600lb with top header mount and bottom base mount....A57 7226F 3/4" Offset pivot, 600lb with top header mount and bottom base mount, fire rated......................................................................................................A57 7227 3/4" Offset pivot, 700lb with top header mount and bottom base mount.... A58 7227F 3/4" Offset pivot, 700lb with top header mount and bottom base mount, fire rated.................................................................................................................. A58 7230F 3 /4" Offset pivot, 1000lb with top header mount and bottom base mount, fire rated.................................................................................................... A59 7237F 3/4" Offset pivot, 1750lb with top header mount and bottom base mount, fire rated......................................................................................................A60 7244F 1 1/2" Offset pivot, 400lb with top header mount and bottom base mount, fire rated...................................................................................................... A61 7245F 1 1/2" Offset pivot, 500lb with top header mount and bottom base mount, fire rated..................................................................................................... A62 7212-7212V-7222 INT 3/4" Offset intermediate pivot..................................................... A63 7215-7226-7227 INT 3/4" Offset intermediate pivot.......................................................A64 7215F-7226F-7227F INT 3/4" Offset intermediate pivot, fire rated.............................A64 7230F-7237F INT 3/4" Offset intermediate pivot, fire rated........................................ A65 7244F-7245F INT 1 1/2" Offset intermediate pivot, fire rated....................................... A65 7215PT-7226PT-7227PT INT 3/4" Offset power transfer intermediate pivot..........A66 7215FPT-7226FPT-7227FPT INT 3/4” Offset power transfer intermediate pivot, fire-rated....................................................................................................................A66 7230FPT - 7237FPT INT 3/4" Offset power transfer intermediate pivot, fire rated................................................................................................................................ A67 7230FPT-7237FPT INT 3/4” fire rated intermediate pivot is used with 7230F, 7237F offset pivots................................................................................................ A67 7253 Center hung pivot, 300lb with bottom base mount.............................................A68 7255 Center hung pivot, 500lb with bottom base mount.............................................A69 7255J Center hung pivot, 500lb with bottom jamb mount........................................... A70 7256 Center hung pivot, 600lb with bottom base mount...............................................A71 7259 Center hung pivot, 1000lb with bottom base mount............................................A72 91105F Pocket pivot/hinge, fire rated..................................................................................A73 E91105F Pocket pivot/hinge, power transfer, fire rated................................................. A74 D E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products Latches, catches & bolts General hinge information......................................................................................................A18 Mounting hardware..................................................................................................................A19 Electrification options............................................................................................................A20 How to order.............................................................................................................................. A21 Clearance requirements......................................................................................................... A22 026XY Full mortise - narrow frame leaf, wide door leaf................................................ A23 027XY Full mortise - wide door leaf.................................................................................... A24 040XY Full mortise - wide throw......................................................................................... A25 041XY Full mortise - swing clear.......................................................................................... A26 045XY Half surface - narrow frame leaf, wide door leaf................................................A27 046XY Half surface - wide door leaf................................................................................... A28 053XY Half surface - narrow frame leaf, narrow door leaf........................................... A29 054XY Half surface - narrow door leaf...............................................................................A30 112HD Full mortise - narrow frame and door leaf.............................................................. A31 112XY Full mortise - narrow frame and door leaf............................................................. A32 114XY Full mortise - narrow frame leaf, door edge protector....................................... A33 157XY Full surface ................................................................................................................... A34 210XY Full surface - swing clear........................................................................................... A35 224HD Full mortise - door edge protector......................................................................... A36 224XY Full mortise - door edge protector..........................................................................A37 General hinge information..................................................................................................... A38 Mounting hardware................................................................................................................. A39 Electrification options............................................................................................................A40 How to order.............................................................................................................................. A41 Clearance requirements......................................................................................................... A42 600 Full mortise pin and barrel continuous hinge - steel 700 Full mortise pin and barrel continuous hinge - stainless steel......................... A43 700CS Full mortise pin and barrel continuous hinge w/ decorative cover................A44 602 Full surface pin and barrel continuous hinge - steel 702 Full surface pin and barrel continuous hinge - stainless steel.......................... A45 705 Full mortise, full wrap pin and barrel continuous hinge - stainless steel...........A46 611 Swing clear pin and barrel continuous hinge - steel 711 Swing clear pin and barrel continuous hinge - stainless steel............................. A47 711CS Swing clear pin and barrel continuous hinge w/ decorative cover....................A48 715 Full mortise, half wrap pin and barrel continuous hinge - stainless steel...........A49 715CS Full mortise, half wrap pin and barrel continuous hinge w/ decorative cover.................................................................................................A50 B Continuous hinges Aluminum geared hinges Pin and barrel hinges Pulls & plates General hinge information........................................................................................................A2 Electrification options...............................................................................................................A3 How to order:...............................................................................................................................A4 3PB1 3 Knuckle, plain bearing full mortise hinge.................................................................A5 3CB1 3 Knuckle, concealed bearing full mortise hinge...................................................... A6 3CB1HW 3 Knuckle, concealed bearing, heavy weight full mortise hinge.....................A7 3CB1WT 3 Knuckle, concealed bearing, wide throw full mortise hinge......................... A8 3SP1 3 Knuckle, spring full mortise hinge............................................................................. A9 5PB1 5 Knuckle, plain bearing full mortise hinge..............................................................A10 5BB1 5 Knuckle, ball bearing full mortise hinge.................................................................. A11 5BB1HW 5 Knuckle, ball bearing, heavy weight full mortise hinge............................... A12 5BB1WT 5 Knuckle, ball bearing, wide throw full mortise hinge................................... A13 5BB1SC 5 Knuckle, ball bearing, swing clear full mortise hinge.................................... A14 5BB1BSC 5 Knuckle, ball bearing, beveled swing clear full mortise hinge.................. A14 5BB1SCHW 5 Knuckle, ball bearing, swing clear,heavy weight full mortise hinge.... A15 5BB1BSCHW 5 Knuckle, ball bearing, beveled swing clear, heavy weight full mortise hinge..........................................................................................A15 1000 Series Residential hinges..............................................................................................A16 A1 Architectural hinges A1 General hinge information Selection of the proper weight and bearing type Considerations to determine hinge size Standard weight.......... Plain bearing Standard weight.......... Ball bearing, concealed bearing Heavy weight................. Ball bearing, concealed bearing Considerations to determine weight and bearing type: Guidelines for hinge height Weight of door Frequency of use Frame Door hardware Always use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges. Guidelines for hinge metal Interior door or non-corrosive area use: plated or painted steel Interior labeled door use: plated or painted steel, stainless steel Interior door in corrosive area use: stainless steel , brass, bronze Exterior doors use: Stainless steel, brass, bronze Standard pin material are brass hinge – steel pin, Stainless steel hinge – stainless steel pin, steel hinge – steel pin Guidelines for frequency of door usage: Build type Door width Door thickness Weight Clearance Daily usage Hinge type High frequency/ Heavy weight door Door thickness Door width In inches In inches 1-3/8” Up to 32” 3-1/2 1-3/8 32” to 37” 4” 1-3/4 Up to 36” 4-1/2” 1-3/4 36” to 48” 5” 1-3/4 Over 48” 6” 2” - 2-1/2” Up to 42” 5” heavy weight 2” - 2-1/2” Over 42” 6” heavy weight Hinge height In inches Clearance requirement* Door thickness Clearance needed Hinge open width 1-3/8 1-3/4 4 1-3/4 1 4 1-3/4 1-1/2 4-1/2 1-3/4 2 5 1-3/4 3 6 2 1 4-1/2 Large department store entrance 5,000 Heavy weight 2 1-1/2 5 Hospital corridor and surgical doors 5,000 Heavy weight 2 2-1/2 6 Large office building entrance 4,000 Heavy weight 2-1/4 1 5 School entrance 1,250 Heavy weight 2-1/4 2 6 School toilet door 1,250 Heavy weight 2-1/2 1/2 5 Office stairwell 500 Heavy weight 2-1/2 1-1/2 6 Office building toilet door 400 Heavy weight 3 3/4 6 3 2-3/4 8 Medium frequency/ Medium weight door School corridor door 100 Standard weight Hospital consultation rooms 100 Standard weight Office building corridor door 80 Standard weight Store toilet door 60 Standard weight Storage room 50 Standard weight Residential entrance 30 Plain bearing Interior residential 20 Plain bearing Low frequency /Light door ANSI/BHMA Grade/minimum cycle requirements Grade 1: 2,500,000 Heavy Weight Ball & Concealed Bearing Grade 2: 1,500,000 Standard Weight Ball & Concealed Bearing Grade 3: 350,000 Light Weight Plain Bearing *Distance needed between wall and door at 180° to allow for any projections from wall; trim, decorative molding, etc. Consult factory technical service for engineered special applications Guidelines for number of hinges Doors under 7'6"............ 3 hinges Doors over 7'6"............... 4 hinges Location of hinges Top hinge 5" from jamb rabbet to top of barrel 5" (127mm) Bottom hinge 10" from bottom edge of barrel to finished floor Equal G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A2 Hinges & pivots Architectural hinges Third hinge centered between top and bottom hinges Note: Consult door manufacturer for other hinge locations 10" (254mm) A2 Ives Architectural hardware products Architectural hinges C UL634 Listed Not available 3PB1, 3SP1, and 5PB1 models Not available on 3.5 x 3.5 and 4X4 size hinges Not available with security stud (SH) option Packaged one hinge per box with standard wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Special wire gauge, number, and color configurations available, contact factory Flush bolts & coordinators D Latches, catches & bolts UL634 Listed Not available 3PB1, 3SP1, and 5PB1 models Not available on 3.5 x 3.5 size hinges Not available with security stud (SH) option Packaged one hinge per box with standard wood and machine screws Hinge is NRP as a standard High quality brass ferrules and plastic tubing protect the wires Through-wire hinges cycle tested to ensure durability Special wire gauge, number, and color configurations available, contact factory B Provides door position monitoring. Monitor is rated 30 volts AC/DC at 0.25 amp. Fully compatible with through-wire hinges with 4 wire(TW4M) and 8 wire (TW8M) installations. Supplied standard with CON, option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Pulls & plates Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Each wire is 28 AWG and rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire (TW4) 8 wire (TW8) installations and 12 wire (TW12) installations. All TW4, TW8 and TW12 3 knuckle and 5 knuckle hinges are standard with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Electrical Monitor (MON, TW4M, TW8M) A3 Electrical through-wire (TW4, TW8 and TW12) Hinges & pivots General information - electrification options E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A3 Architectural hinges F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A4 Hinges & pivots Ives Hinge number system Please note: For availability of specific models, please refer to the item’s catalog page or consult Customer Service. How to order: 5 - Function: PB BB CB SP Plain bearing Ball bearing Concealed bearing Spring Hinge Type: 1 2 3 4 Full mortise Half mortise Full surface Half surface G - 1 Weight / Type: Blank Standard weight(BHMA Grade 2) HW Heavy weight(BHMA Grade 1) SC Swing clear BSC Beveled swing clear SCHW Swing clear, heavy weight BSCHW Beveled swing clear, heavy weight WT Wide throw Options: HT Hospital tip SH Security stud (includes NRP as a standard offering) Height 3.5 4 4.5 5 x x x x x Width 3.5 4 4, 4.5, 5, 6 4.5, 5, 6, 7, 8 Consult model page for availability. Finish BHMA 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Description Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Substrate Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel For other colors, consult factory. Miscellaneous hardware BB Number of knuckles: 3 3 Knuckle 5 5 Knuckle Options 2 NRP RC-1/4 RC-5/8 SEC TW4 TW8 TW12 MON TW4M TW8M CON A4 Non-removable pin Rounded corners 1/4" Rounded corners 5/8" Security screws (hollow metal - hex head pin in socket) Through-wire - four wire Through-wire - eight wire Through-wire - twelve wire Monitor Through-wire - four wire with monitor Through-wire - eight wire with monitor Allegion connect (standard for TW4, TW8, and TW12) Ives Architectural hardware products Finish USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 - HW - SH - 4.5x4.5 - 652 - NRP Architectural hinges Recommended for standard weight doors Recommended for low frequency usage Not recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) NRP. . . . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . . . Rounded corners SEC . . . . . . . . . . . . . . . . Security fasteners pin-in-socket Material substrate Made from brass, 1040 steel, or 304 series stainless steel Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 Gauge 0.123 0.130 0.134 0.134 0.146 C Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 Flush bolts & coordinators Dimensions B Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions Pulls & plates Certifications A5 Hinges & pivots 3PB1 3 Knuckle, plain bearing full mortise hinge Refer to General Hinge Information page to determine proper hinge for application 3PB1 Finishes F For other colors, consult factory. Exterior hardware USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 E Finish Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Stops Substrate Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze D Description 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Latches, catches & bolts BHMA G Miscellaneous hardware Ives Architectural hardware products A5 Architectural hinges Hinges & pivots 3CB1 3 Knuckle, concealed bearing full mortise hinge Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Material substrate NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M*. . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M*. . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON*. . . . . . . . . . . . . Monitor (not available on 4X4) B Certifications Pulls & plates Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Flush bolts & coordinators A6 C Made from brass, 1040 steel, or 304 series stainless steel Dimensions D Latches, catches & bolts Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.123 0.130 0.134 0.134 0.146 0.146 Refer to General Hinge Information page to determine proper hinge for application Miscellaneous hardware F Exterior hardware E Stops 3CB1 Finishes BHMA Description Substrate Finish 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G For other colors, consult factory. *TW and MON options are not available on 3.5X3.5. A6 Ives Architectural hardware products Architectural hinges Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with two heavy duty concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Material substrate Made from brass, 1040 steel, or 304 series stainless steel Size (mm) 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.180 0.180 0.190 0.190 Refer to General Hinge Information page to determine proper hinge for application USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware For other colors, consult factory. F Finish Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Exterior hardware Substrate Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze E Description 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Stops BHMA D 3CB1HW Finishes Latches, catches & bolts Height x Width 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 C Dimensions Flush bolts & coordinators NRP. . . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . . Rounded corners SEC . . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4.. . . . . . . . . . . . . . Four wire TW4M.. . . . . . . . . . . . Four wire with monitor TW8.. . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON.. . . . . . . . . . . . . . Monitor B Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Pulls & plates Certifications A7 Hinges & pivots 3CB1HW 3 Knuckle, concealed bearing, heavy weight full mortise hinge Ives Architectural hardware products A7 Architectural hinges Hinges & pivots 3CB1WT 3 Knuckle, concealed bearing, wide throw full mortise hinge B Pulls & plates A8 Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two concealed nylon bearings Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON. . . . . . . . . . . . . Monitor Material substrate C Flush bolts & coordinators 1040 steel Dimensions Latches, catches & bolts Height x Width 4.5 x 5 4.5 x 6 5x6 5x7 5x8 Size (mm) 114 x 127 114 x 152 127 x 152 127 x 178 127 x 203 Gauge 0.134 0.134 0.146 0.146 0.146 Refer to General Hinge Information page to determine proper hinge for application E Stops D 3CB1WT Finishes BHMA Description Substrate Finish 600 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A8 Ives Architectural hardware products Architectural hinges For use with doors where self-closing is required Maximum door weight 120 lbs, max door width 36" Maximum labeled door size - 3'0" wide x 7'0" x 1 3/4" thick as set in NFPA #80 Packed with fasteners for hollow metal and half metal / half wood applications 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Pin for setting spring tension Adjusting wrench Made from 1040 steel or 304 series stainless steel Dimensions Size (mm) 102 x 102 114 x 102 114 x 114 Options RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket Gauge 0.130 0.134 0.134 3SP1 Finishes Substrate Finish Primer paint Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 D Description 600 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Latches, catches & bolts BHMA C Refer to General Hinge Information page to determine proper hinge for application. Flush bolts & coordinators Height x Width 4x4 4.5 x 4 4.5 x 4.5 B Material substrate Certified to ANSI/BHMA A156.17 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL listed for use with fire rated doors Pulls & plates Certifications A9 Hinges & pivots 3SP1 3 Knuckle, spring full mortise hinge For other colors, consult factory. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A9 Architectural hinges Hinges & pivots 5PB1 5 Knuckle, plain bearing full mortise hinge B Pulls & plates A10 Recommended for standard weight doors Recommended for low frequency usage Not recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners - pin-insocket Material substrate Made from brass, 1040 steel, or 304 series stainless steel Flush bolts & coordinators Dimensions C Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 Gauge 0.123 0.130 0.134 0.134 0.146 Refer to General Hinge Information page to determine proper hinge for application F Exterior hardware E Stops D Latches, catches & bolts 5PB1 Finishes BHMA Description Substrate Finish 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware For other colors, consult factory. A10 Ives Architectural hardware products Architectural hinges Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS 10-24 x 1/2 UFPHMS, 10 x 1 FPHWS (3.5x3.5 hinge size only) Material substrate Made from brass, 1040 steel, or 304 series stainless steel Size (mm) 89 x 89 102 x 102 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.123 0.130 0.134 0.134 0.146 0.146 5BB1 Finishes For other colors, consult factory. G Miscellaneous hardware USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 F Finish Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Exterior hardware Substrate Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze E Description 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Stops BHMA D Refer to General Hinge Information page to determine proper hinge for application Latches, catches & bolts Height x Width 3.5 x 3.5 4x4 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 C Dimensions Flush bolts & coordinators NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M*. . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON*. . . . . . . . . . . . . Monitor (not available on 4X4) B Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors Pulls & plates Certifications A11 Hinges & pivots 5BB1 5 Knuckle, ball bearing full mortise hinge *TW and MON options are not available on 3.5X3.5. Ives Architectural hardware products A11 Architectural hinges Hinges & pivots 5BB1HW 5 Knuckle, ball bearing, heavy weight full mortise hinge B Pulls & plates A12 Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with four ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions UL Classified for windstorm rated assemblies - R37965 UL Listed, 3 hour fire doors NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON. . . . . . . . . . . . . Monitor Refer to General Hinge Information page to determine proper hinge for application C Flush bolts & coordinators Made from brass, 1040 steel, or 304 series stainless steel Latches, catches & bolts Material substrate Dimensions Height x Width 4.5 x 4 4.5 x 4.5 5 x 4.5 5x5 Size (mm) 114 x 102 114 x 114 127 x 114 127 x 127 Gauge 0.180 0.180 0.190 0.190 F Exterior hardware E Stops D 5BB1HW Finishes BHMA Description Substrate Finish 600 605 606 612 613 614 616 619 622 625 626 643e/716 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US3 US4 US10 US10B US10A US11 US15 B-BLK US26 US26D B-643e/716 US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware For other colors, consult factory. A12 Ives Architectural hardware products Architectural hinges Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Recommended for use with a door closer Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Material substrate 1040 steel Size (mm) 114 x 127 114 x 152 127 x 152 127 x 178 127 x 203 Gauge 0.134 0.134 0.146 0.146 0.146 Refer to General Hinge Information page to determine proper hinge for application Substrate Finish Primer paint Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 E Description 600 631 632 633 639 640 641 643 646 651 652 643e/716 Stops BHMA D 5BB1WT Finishes Latches, catches & bolts Height x Width 4.5 x 5 4.5 x 6 5x6 5x7 5x8 C Dimensions Flush bolts & coordinators NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip SH. . . . . . . . . . . . . . . . Security stud - comes standard with NRP RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON.. . . . . . . . . . . . . Monitor B Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions Pulls & plates Certifications A13 Hinges & pivots 5BB1WT 5 Knuckle, ball bearing, wide throw full mortise hinge For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A13 Architectural hinges Meets ANSI/BHMA A156.1 A8122 – Steel A5122 – Stainless Steel A2122 – Brass Designed to completely clear the opening when door is opened 92°. Recommended for use in ADA door opening applications 5BB1SC made for square edge doors 5BB1BSC made for beveled edge doors Recommended for medium weight doors (<150 lbs) Recommended for medium frequency usage (<400 cycles per day) Made with two ball bearing assemblies Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS Certifications Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions Material substrate Flush bolts & coordinators B Pulls & plates A14 Hinges & pivots 5BB1SC 5 Knuckle, ball bearing, swing clear full mortise hinge 5BB1BSC 5 Knuckle, ball bearing, beveled swing clear full mortise hinge C Made from 1040 steel or 304 series stainless steel Dimensions Latches, catches & bolts Height 4.5 5 Size (mm) 114 127 NRP. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON. . . . . . . . . . . . . Monitor Gauge 0.134 0.146 Refer to General Hinge Information page to determine proper hinge for application E Stops D 5BB1SC Finishes BHMA Description Substrate Finish 600 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A14 Ives Architectural hardware products Architectural hinges Options Certified to ANSI/BHMA A156.1 for performance standards Meets ANSI/BHMA 156.7 for template hinge dimensions Made from 1040 steel or 304 series stainless steel Size (mm) 114 127 Gauge 0.180 0.190 Refer to General Hinge Information page to determine proper hinge for application Substrate Finish 600 629 630 631 632 633 639 640 641 643 646 651 652 643e/716 Primer paint Bright stainless Satin stainless Matte black Bright brass Satin brass Satin bronze Oil rubbed bronze Oxidized bronze Blackened bronze Satin nickel Bright chrome Satin chrome Aged bronze Steel Stainless steel Stainless steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel USP US32 US32D F-BLK US3 US4 US10 US10B US10A US11 US15 US26 US26D F-643e/716 E Description Stops BHMA D 5BB1SCHW Finishes Latches, catches & bolts Height 4.5 5 C Dimensions NRP.. . . . . . . . . . . . . . Non-removable pin HT. . . . . . . . . . . . . . . . Hospital tip RC-1/4, RC-5/8. . . Rounded corners SEC . . . . . . . . . . . . . . Security fasteners pin-in-socket TW4 . . . . . . . . . . . . . Four wire TW4M . . . . . . . . . . . Four wire with monitor TW8 . . . . . . . . . . . . . Eight wire TW8M . . . . . . . . . . . Eight wire with monitor TW12. . . . . . . . . . . . . Twelve wire MON. . . . . . . . . . . . . Monitor Flush bolts & coordinators Material substrate B Certifications Pulls & plates Designed to completely clear the opening when door is opened 92°. Recommended for use in ADA door opening applications 5BB1SCHW made for square edge doors 5BB1BSCHW made for beveled edge doors Recommended for heavier weight doors (>150 lbs) Recommended for high frequency usage (400 cycles per day) Made with four ball bearing assemblies Packed with fasteners for hollow metal and wood doors 12-24 x 1/2 UFPHMS, 12 x 1 1/4 FPHWS A15 Hinges & pivots 5BB1SCHW 5 Knuckle, ball bearing, swing clear,heavy weight full mortise hinge 5BB1BSCHW 5 Knuckle, ball bearing, beveled swing clear, heavy weight full mortise hinge For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A15 Architectural hinges A16 Hinges & pivots 1000 Series Residential hinges Pulls & plates 1010 1011 B C Flush bolts & coordinators 3.5 x 3.5 or 4 x 4 plain bearing hinges Button non-rising pins and caps Recommended for doors weighing less than 70 lbs and not exceeding 3'0" x 7'0" Recommended for low frequency, residential applications Not recommended for use with a door closer For metal door applications see 3PB1 and 5PB1 models Available with rounded (1/4" or 5/8") or square corners Packed with fasteners for wood doors #9 x 1 FPHWS Material substrate Made from 1040 steel Dimensions Model 1010 1011 1012 1020 1021 1012 1020 Height x Width (in) 3.5 x 3.5 3.5 x 3.5 3.5 x 3.5 4x4 4x4 Corner Square 5/8" Radius 1/4" Radius Square 5/8" Radius 5BB1HW Finishes BHMA Description Substrate Finish 631 632* 646 651 652 643e/716 Matte black Bright brass Satin nickel Bright chrome Satin chrome Aged bronze Steel Steel Steel Steel Steel Steel F-622E F-605E F-619E F-625E F-626E F-716E * Only available on 1011 model. For other colors, consult factory. D Latches, catches & bolts G Miscellaneous hardware F Exterior hardware E Stops 1021 A16 Ives Architectural hardware products Continuous hinges The design of a continuous hinge eliminates the gap between the door and the frame. The absence of gap also helps prevents finger from being pinched, making it a safer device than traditional hinges. These benefits result in higher efficiency and less maintenance, maximizing the value of your opening investment. A17 Not only does this reduce hinge failure, it also keeps your door in constant alignment, greatly reducing the chance of door sag. These characteristics make continuous hinges suitable for high use/high traffic doors. Hinges & pivots Ives Continuous Hinges are designed to last the life of the building. The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of door and frame on butt hinge applications. Continuous hinges are available in two styles; aluminum geared and pin and barrel in steel or stainless steel. B Pulls & plates Aluminum geared I ve s 5 0 0 ,Ives 6 0provides 0 , 7 0 0two unique series of bearing designs. The HD model features a spread bearing design for lighter weight doors. The XY features a center load bearing design to help reduce frame issues and also has an available hospital tip cap and electric through-wire panel with a continuous cover. 3/8” 1/8” GA 0.075” Hi n ge T h i ck n es s 2-1/4 ” 1-3/8” Latches, catches & bolts I ve s1-3/64” 1 1 , 7 1 1 GA 0.075” Hi n ge T h i ck n es s 3/8” 1/16” 1-9/16” D 1/4” C 1/2” Flush bolts & coordinators Geared continuous hinges utilize a single gear section for the leaf and a separate gear section for the frame side of the door. The two are held in place together by a full length cover channel and rotate on a series of bearings. 1/4 ” 1-3/4” Pin and barrel 5/32” E Stops Pin and Barrel hinges share many of the same characteristics of a traditional hinge. Both have a center pin and rolled knuckles. However, a continuous Pin and Barrel hinge stretches along the entire length of the frame. IVES offers both stainless steel and primed steel to best match your specific application. 3/4” Ives also offers the CS series pin and barrel hinges which provides a patented solution that brings the clean aesthetic design of aluminum geared continuous hinge to the ruggedness and safety afforded by stainless pin and barrel continuous hinges. [12.7] 1/2" [12.7] 3/4" [19.1] [1.3] [1.6] 1 1/16" 3/4" [19.1] 1/16" GA. 0.050" G DOOR Miscellaneous hardware FRAME [44.5] 1/8" [9.5] 1/2" 3/8" [9.5] 5/8" [15.9] [55.5] 2 3/16" 2" [50.8] 7/32" [5.6] HINGE ALLOWANCE F GA 0.075" HINGE THICKNESS GA. 0.060" [1.5] Exterior hardware HINGE Lifetime warranty Ives continuous hinges carry a limited lifetime warranty, ensuring your opening will function to your satisfaction every time. Please refer to the price book for more detailed warranty information. Ives Architectural hardware products A17 A18 Hinges & pivots Aluminum geared hinges General hinge information ANSI Certified All Ives Aluminum geared hinges are certified to ANSI 156.26, Grade 1 XY Models. . . . . . . . . . Grade 1 150lb and 300lb door test HD Models . . . . . . . . . Grade 1 150lb door test B Pulls & plates UL Listed All Ives Aluminum geared hinges are tested and approved UL 10C (90 minutes). Material Hinge duty XY Model - Bearings HD Model E Stops F Exterior hardware US Description 628 710 US28 313AN Clear aluminum anodized Dark bronze anodized Base Material Aluminum Aluminum Custom finishes available, consult factory. Field modifications Ives Aluminum geared continuous hinges can be cut to length from both ends during installation. The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fastners regardless of the original length of the hinge. Requires the hinge to be cut from both ends. Example: A 119" hinge can have 25" removed from each end to make it a 69" long hinge. HD Models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. Door weight For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 450 lbs a 16 gauge channel in the frame is required. For doors up to 600 lb, rivet nuts are required in the frame in addition to the frame reinforcement. Max door width of 4'0". Hospital tips Hospital tip (HT) for XY models D Latches, catches & bolts C Flush bolts & coordinators All Ives Aluminum geared hinges are heavy duty(XY and HD models) XY Models: Rounded gear design for extended life and smoother operation. Patented, center loaded, interlocking bearing design which helps handle the opening and closing of the door better over time. All sizes have 37 Bearings. XY Mounting Slot Adjustability on all full and half surface models to help with installation. Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps. Improved aesthetics with a curved, articulating cover design which eliminates pinch points HD Models Features transmission gear design with bearings that are evenly spaced every 3" on center - Amount of bearings varies by size - 83". . . . . . . 32 Bearings - 85". . . . . . . 32 Bearings - 95". . . . . . . 36 Bearings - 120". . . . . . 47 Bearings Standard lengths 83", 85", 95", 119"(XY Models), 120"(HD Models) Custom lengths available up to 119", consult factory. Handing required for 224HD G Miscellaneous hardware BHMA XY Models 6063-T6 Aluminum XY Model Slot Adjustability Finishes A18 Ives Architectural hardware products The XY models features a new ligature resistant and tamper resistant Hospital Tip Cap. The design provides a single uniform 45° angle surface with no exposed edges or openings. Aluminum geared hinges A19 Hinges & pivots Mounting hardware Standard hardware Full mortise hinges 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Half surface hinges Includes 210XY 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 12-24 x 3/4" Steel self drilling / self tapping hex head screw Full surface hinges 157XY Only 12-24 x 3/4" Steel self drilling / self tapping hex head screw B Full mortise hinges Pulls & plates Security screws - Hollow metal door and frame (SEC/HM) 12-24 X 1/2" Stainless steel socket security screw 112HD and 224HD only Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) Security screws - 1/2 wood, 1/2 hollow metal (SEC/WD/HM) 12-24 X 1/2" Stainless steel socket security screw 12 X 1 1/4" Stainless steel socket security wood screw Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) C 1/2 Self drill, self tap / 1/2 wood (TEK/WD) Full mortise hinges 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 12 x 1 1/4" Phillips head wood screw Half surface hinges 12-24 x 3/4" Steel self drilling / self tapping phillips head screw 1/4 x 1 1/2" Hex head lag screw Full surface hinges 12-24 x 3/4" Steel self drilling / self tapping hex head screw 1/4 x 1 1/2" Hex head lag screw Latches, catches & bolts Wood door and frame (WD) 12 x 1 1/4" Phillips head wood screw Half surface hinges Includes 210XY 12 x 1 1/4" Phillips head wood screw 1/4 x 1 1/2" Hex head lag screw Full surface hinges 157XY only 1/4 x 1 1/2" Hex head lag screw D Full mortise hinges Flush bolts & coordinators Full Mortise Hinges 112HD and 224HD only Thread forming (TF) Full mortise hinges 12-24 x 3/4" Steel thread forming phillips head screw E Stops 112HD and 224HD only Available as accessory parts kit for full mortise XY hinges (026XY, 027XY, 040XY, 041XY, 112XY, 114XY, 224XY) F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A19 General information - electrification options Electric power transfer (EPT) availabile on HD and XY models Electrical through-wire panel with Allegion Connect (TWP CON) (XY models only) Electric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives Continuous Hinges provide standard cut outs to fit Von Duprin EPT-2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Door handing is required. The most secure and best solution for powering your door. The redesigned XY Through-Wire Panel is heavy duty and easy-toinstall. Hinge consists of single piece cover design for improved aesthetics and three sections with a standard bottom length and through-wire panel location. The panel can quickly slip in and out of the the hinge for maintenance and replacement. Unlike all of the other manufacturer solutions, the XY throughwire panel maintains a one piece appearance on the cover side of the hinge. The new wire design features a teflon coated wire which greatly improves performance and durability. The new panel also comes standard with the Allegion Connect 8-pin and 4-pin connectors which make it easy to connect to other electrical consumption devices. Warrantied for up to 5 years. Door handing is required. Flush bolts & coordinators B Pulls & plates A20 Hinges & pivots Aluminum geared hinges EPT 112HD TWP XY Series D Latches, catches & bolts C Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylidrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives XY TWP hinges are fully compatible with up to 12 wire installations. Electrical cutouts Ives aluminum continuous hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. When ordering indicate the following: E Stops 1. Opening size. 2. Handing. LH, RH, LHR or RHR. 3. Manufacturer and model number of the electrical product being used. Example; Von Duprin ETPT2 Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. In accordance with industry standards, all cutouts are made from top edge of door to center line of cut-out. If top of door to top of cut-out is provided, 4.3/4" are added to the dimension provided to determine the centerline of the cut-out. This provides an extra 1⁄8" of tolerance to ensure the EPT will fit during installation when varying installation methods are used. F Exterior hardware Below are standard locations for Von Duprin EPT2 or EPT10, and monitor switch. Miscellaneous hardware Note: See ordering guide in price book for proper placement. G Standard Length HD XY XY EPT EPT TWP CON 83" 30" 30" 43.5" 85" 32" 32" 45.5" 95" 42" 42" 55.5" 119" (XY) – 66" 79.5" 120" (HD) 67" – – XY TWP CON is located 39.5 inches from bottom of the hinge. Consult factory for TWP locations on custom length hinges. A20 Ives Architectural hardware products Aluminum geared hinges HT US28 83 TWP CON A21 112XY Hinges & pivots How to order Model Full mortise - swing clear 045XY Half surface - narrow frame leaf, wide door leaf 046XY Half surface - wide door leaf 053XY Half surface - narrow frame leaf, narrow door leaf 054XY Half surface - narrow door leaf 112XY Full mortise - narrow frame and door leaf 112HD Full mortise - narrow frame and door leaf 114XY Full mortise - narrow frame leaf, door edge protector 157XY Full surface - center pivot 210XY Full surface - swing clear 224XY Full mortise - door edge protector 224HD Full mortise - door edge protector C Full mortise - wide throw 041XY Flush bolts & coordinators Full mortise - wide door leaf 040XY B Full mortise - narrow frame leaf, wide door leaf 027XY Pulls & plates 026XY HT Latches, catches & bolts Option 1 Hospital tip (XY models only) (Only available on 026XY, 027XY, 040XY, 112XY, 114XY, 224XY ) D Finish US28 313AN 315AN Clear Anodized Aluminum Dark Bronze Anodized Aluminum Black Anodized Aluminum (XY only) Custom finishes available, consult factory. Length E Stops 83" 85" 95" 119"(XY) / 120"(HD) Custom lengths available up to 119", consult factory. When specifying length, handing required. Option 2 EPT G Miscellaneous hardware TFWD F SECHM SECWDHM SECWDWD WD TEKWD TF Exterior hardware TWP CON Electric power transfer prep (Only available on 026XY, 027XY, 112HD, 112XY, 114XY, 224HD, 224XY ) Handing (LH and RH) Required for 026, 027, 114, and 224 models Through-wire Panel with Allegion Connect Standard (Only Available on 026XY, 027XY, 112XY, 114XY, 224XY ) Security fasteners - pin-in-socket Security fasteners - pin-in-socket (half wood, half hollow metal) Security fasteners - pin-in-socket (wood door and frame) Wood door fasteners Half thread forming, half wood Thread forming screws (pilot hole required) (Only available with 112HD and 224HD) Half thread forming, half wood Ives Architectural hardware products A21 A22 Hinges & pivots Aluminum geared hinges Clearance requirements Consult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. Hinge Side Clearance Hinge Side Clearance Hinge Side Clearance 3/16” E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates 1/8” 1/32” Frame Irregularity 1/16” Frame Irregularity Single door Door under-sizing Model Hinge-side clearance Lock-side clearance Frame irregularity Beveled door clearance Square edged Beveled edge 026XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 027XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 040XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 041XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 045XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 046XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 053XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 054XY 5/32" 1/8" 1/32" 1/32" 5/16" 11/32" 112HD 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 112XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 114XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 157XY 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 210XY 1/16" 1/8" 1/32" 1/32" 7/32" 1/4" 224HD 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 224XY 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" Model Hinge-side clearance (2 doors) Lock-side clearance Frame irregularity (2 doors) Beveled door clearance (2 doors) Square edge total Square edge each door Beveled edge total Beveled edge each door 026XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 027XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 040XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 041XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 045XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 046XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 053XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 054XY 5/16" 3/16" 1/16" 1/16" 9/16" 9/32" 5/8" 5/16" 112HD 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 112XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 114XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 157XY 1/8" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 210XY 1/8" 3/16" 1/16" 1/16" 3/8" 3/16" 7/16" 7/32" 224HD 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 224XY 5/8" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" Pair of doors G Miscellaneous hardware F Exterior hardware Door under-sizing Templates and installation instructions available on line at www.allegion.com/us A22 Ives Architectural hardware products Aluminum geared hinges B Pulls & plates Certifications A23 Wide door leaf for 2" and 2 1/4" doors Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non-handed for custom cut lengths 3/32" door inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps. For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Hinges & pivots 026XY Full mortise - narrow frame leaf, wide door leaf Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified 83", 85", 95", 119" Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. C 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators Standard lengths Options D Optional mounting hardware: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through-wire panel with Allegion Connect TEKWD . . . . . . . . . . 1/2 Self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 1/4" 1 9/16" 2 3/4" F Exterior hardware 5/16" Clearance for square 11/32" Clearance for beveled edge door edge door G Miscellaneous hardware Ives Architectural hardware products A23 Aluminum geared hinges Hinges & pivots 027XY Full mortise - wide door leaf Wide door leaf for 2" and 2 1/4" doors Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non-handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Pulls & plates A24 Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware C 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through-wire panel with allegion connect D Optional mounting hardware: SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: E Stops For pairs of doors see chart and general information 2 11/16" F Exterior hardware 1 7/8" G Miscellaneous hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A24 Ives Architectural hardware products 2 3/4" Aluminum geared hinges B Pulls & plates Certifications A25 Wide throw for 1 3/4" doors Patented center loaded, interlocking bearing design Non-handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Hinges & pivots 040XY Full mortise - wide throw Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths 83", 85", 95", 119" 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: HT. . . . . . . . . . . . . . . . Hospital tip SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information Stops 1 19/32" E 1 1/8" D Latches, catches & bolts Optional mounting hardware: C Finishes Flush bolts & coordinators Standard mounting hardware 3 1/4" 1 11/16" F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A25 Aluminum geared hinges Hinges & pivots 041XY Full mortise - swing clear Pulls & plates A26 Swing clear for 1 3/4" doors Installs easily on doors with 90° opening Door edge protector Patented center loaded, interlocking bearing design Non-handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 450 pounds without reinforcing. 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Optional mounting hardware: D Latches, catches & bolts SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 31/32" 1 7/8" 1 25/32" Exterior hardware 2 5/32" req’d for rotation G Miscellaneous hardware F 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A26 Ives Architectural hardware products Aluminum geared hinges B Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Pulls & plates Certifications A27 Half surface for retrofit or new construction Frame leaf depth 1-9/16" Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non-handed for custom cut lengths 9/32" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Hinges & pivots 045XY Half surface - narrow frame leaf, wide door leaf Standard lengths Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators 83", 85", 95", 119" Optional mounting hardware: For single door applications: For pairs of doors see chart and general information D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts 3" 2" E Stops 2 13/32" 1 9/16" F Exterior hardware 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A27 Aluminum geared hinges Hinges & pivots 046XY Half surface - wide door leaf Half surface for retrofit or new construction Frame leaf depth 1-7/8" Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non-handed for custom cut lengths 9/32" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Pulls & plates A28 Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Latches, catches & bolts Optional mounting hardware: D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information 3" E Stops 2 11/16" 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door G Miscellaneous hardware F Exterior hardware 1 7/8" A28 Ives Architectural hardware products 2" Aluminum geared hinges B Pulls & plates Certifications A29 Half surface for retrofit or new construction Frame leaf depth 1-9/16" Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non-handed for custom cut lengths 1/8" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Hinges & pivots 053XY Half surface - narrow frame leaf, narrow door leaf Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified 83", 85", 95", 119" Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN) Custom Anodizing and Painting are available, consult factory Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. D Optional mounting hardware: Latches, catches & bolts Finishes C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators Standard lengths SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 1/32" 2 13/32" 1" Exterior hardware 1 9/16" F 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A29 Aluminum geared hinges Hinges & pivots 054XY Half surface - narrow door leaf Half surface for retrofit or new construction Frame leaf depth 1-7/8" Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Pinch point between cover and door is eliminated Non-handed for custom cut lengths 1/8" door inset Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials B Pulls & plates A30 Certifications Flush bolts & coordinators Standard lengths Latches, catches & bolts Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Optional mounting hardware: 83", 85", 95", 119" Standard mounting hardware C 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information Stops 2 1/32" 1" E 2 11/16" Exterior hardware 1 7/8" G Miscellaneous hardware F 5/32" Clearance for Square Edge Door 3/16" Clearance for Beveled Edge Door A30 Ives Architectural hardware products Aluminum geared hinges For 1 3/4" doors Spread bearing design Non-handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing A31 Hinges & pivots 112HD Full mortise - narrow frame and door leaf Certifications B Pulls & plates Meets ANSI 156.26 for 150lbs UL10C certified Standard lengths 83", 85", 95", 120" Standard Mounting Hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Clear Anodized (US28), Dark Bronze Anodized (313AN) Custom anodizing and painting are available, consult factory. C Options: EPT . . . . . . . . . . . . . . Electric power transfer Optional mounting hardware: For single door applications: For pairs of doors see chart and general information D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TF. . . . . . . . . . . . . . . . Thread forming screws TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts Flush bolts & coordinators Finishes 2 9/32" E Stops 1 9/16" Bevel Edge F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A31 Aluminum geared hinges Hinges & pivots 112XY Full mortise - narrow frame and door leaf For 1 3/4" doors Patented center loaded, interlocking bearing design Non-handed for custom cut lengths Flush mounted, no inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Pulls & plates A32 B Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 119" Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through-wire panel with Allegion Connect Optional mounting hardware: D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: Stops For pairs of doors see chart and general information E 2 5/16" Exterior hardware 1 9/16" Bevel Edge G Miscellaneous hardware F 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A32 Ives Architectural hardware products Aluminum geared hinges B Pulls & plates Certifications A33 For 1 3/4" doors Door edge protector Recommended for gasketing and weatherstripping applications Patented center loaded, interlocking bearing design Non-handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Hinges & pivots 114XY Full mortise - narrow frame leaf, door edge protector Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified 83", 85", 95", 119" Standard mounting hardware Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. C 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Flush bolts & coordinators Standard lengths Options: D Optional mounting hardware: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through-wire panel with Allegion Connect SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information E Stops 2 5/16" 1 9/16" 2 9/16" F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A33 Aluminum geared hinges Hinges & pivots 157XY Full surface A34 B Pulls & plates A patented easy-to-install, heavy duty, full surface continuous hinge Narrow Frame Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers Non-handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 550 lbs For lead-lined application consult factory for engineering specials Certifications Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Flush bolts & coordinators Standard lengths 83", 95", 119" Standard mounting hardware C 12-24 x 1/2" Steel self drilling / self tapping hex head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Latches, catches & bolts Optional mounting hardware: TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame D For single door applications: For pairs of doors see chart and general information Stops 3 3/16" Exterior hardware E 7/8" G Miscellaneous hardware F 1 5/8" 1/16" Clearance for Square Edge Door 3/32" Clearance for Beveled Edge Door A34 Ives Architectural hardware products 1" 1 1/4" Aluminum geared hinges B Pulls & plates Certifications A35 Patented center loaded, interlocking bearing design XY (lateral and vertical) adjustability while hanging the door Articulating cover design eliminates pinch point between center channel cover and door and frame leaf covers Non-handed for custom cut lengths 1/32" door inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 550 pounds For lead-lined application consult factory for engineering specials Hinges & pivots 210XY Full surface - swing clear Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Standard lengths 83", 85", 95", 119" 12-24 x 3/4" Steel self drilling / self tapping hex head screw 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Optional mounting hardware: For single door applications: For pairs of doors see chart and general information D SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame Latches, catches & bolts Flush bolts & coordinators Standard mounting hardware 3 9/16" 1 15/16" E Stops 1 5/16" F Exterior hardware 1/16" Clearance for Square Edge Door 3/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A35 Aluminum geared hinges Hinges & pivots 224HD Full mortise - door edge protector A36 For 1 3/4" doors Door edge protector Spread bearing design Non-handed for custom cut lengths 1/16" Door Inset 48" Maximum door width Beveled or square edge doors For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing Pulls & plates Certifications B Meets ANSI 156.26 for 150lbs UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators 12-24 x 3/4" Steel self drilling / self tapping phillips head screw Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN) C Custom anodizing and painting are available, consult factory. Options: EPT . . . . . . . . . . . . . . Electric power transfer Optional mounting hardware: D Latches, catches & bolts SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TF. . . . . . . . . . . . . . . . Thread forming screws TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: E Stops For pairs of doors see chart and general information Exterior hardware 2 5/8" 1 15/16" G Miscellaneous hardware F 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door A36 Ives Architectural hardware products 2 19/32" Aluminum geared hinges B Meets ANSI 156.26 for 150lbs and 300lbs UL10C certified Pulls & plates Certifications A37 For 1 3/4" doors Door edge protector Patented center loaded, interlocking bearing design Non-handed for custom cut lengths 1/16" door inset 48" Maximum door width Beveled or square edge doors Frame guidance lip is extended further for retrofit applications to cover existing heavy weight architectural hinge preps For doors weighing up to 450 pounds without reinforcing, 600 pounds with reinforcing For lead-lined application consult factory for engineering specials Hinges & pivots 224XY Full mortise - door edge protector Standard lengths Standard mounting hardware 12-24 x 3/4" Steel self drilling / self tapping phillips head screw C Finishes Clear Anodized (US28), Dark Bronze Anodized (313AN), Black Anodized (315AN) Custom anodizing and painting are available, consult factory. Options: SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame TEKWD . . . . . . . . . . 1/2 self drill, self tap 1/2 wood WD. . . . . . . . . . . . . . . Wood door and frame D Optional mounting hardware: Latches, catches & bolts HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TWP CON. . . . . . . . Electrical through-wire panel with Allegion Connect Flush bolts & coordinators 83", 85", 95", 119" For single door applications: For pairs of doors see chart and general information E Stops 2 11/16" 2 9/16" 1 7/8" F Exterior hardware 5/16" Clearance for Square Edge Door 11/32" Clearance for Beveled Edge Door G Miscellaneous hardware Ives Architectural hardware products A37 General hinge information C Flush bolts & coordinators B Pulls & plates A38 Hinges & pivots Pin and barrel hinges Certifications Finishes 600 and 700 Series meets ANSI 156.26, Grade 1 CS Series models certified ANSI 156.26, Grade 1, 150lb door test BHMA UL Listed All Ives pin and barrel hinges are tested and approved UL 10C (3 hr). 600 Series 1012 Series, 14 Gauge cold-rolled steel 700, 702, 705, 711, 715 Series 304 Series, 14 Gauge stainless steel CS Series 304 Series, 14 Gauge stainless steel body and 6063-T6 aluminum cover Barrel Type Standard series The standard series pin and barrel continuous hinges features twin self lubricated nylon bearings with a stainless steel pin. CS Series The CS Series is a heavy duty, easy-to-install, stainless steel pin and barrel continuous hinge that can be used for fire applications and is highly suitable for after-market or new construction situations. The patented covers hide the unsightly pin and barrel of the standard pin and barrel hinges, giving the CS Series continuous hinge a stylish appearance to accompany heavy duty performance. The CS Series includes medical grade, patented nylon winged bearings. They also include the XY adjustability feature which allows for better door alignment during installation. Standard lengths 83", 85", 95", 120" Custom lengths available up to 120", consult factory. Handing required for 702, 705, 711, 715. Description Finish Steel USP 700, 702, 705, 711, 715 Series 630 Satin stainless steel Stainless steel US32D 700CS, 705CS, 711CS Series 441 Satin stainless anodized 600 Grey primer paint 628 Clear aluminum anodized 688 Satin brass anodized 709 Satin bronze anodized 710 Dark bronze anodized 711 Black anodized 712 Bright chrome anodized 713 Satin chrome anodized Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom finishes available, consult factory. Field modifications Ives pin and barrel continuous hinges can be cut to length during installation. Standard models The unique mounting pattern allows to cut up to 6" from bottom while still having double row fasteners. If cut more than 13.5", other modifications may be necessary. CS Models The unique mounting pattern of the XY hinge allows it to be cut down to 69" while still having double row fasteners regardless of the original length of the hinge. Example: A 119" hinge can have 25" removed from each end to make it a 69" long hinge. Door weight For doors up to 200 lbs, no door reinforcement is required. For doors between 200 and 300 lbs, a 16 gauge channel in the frame is required. For doors up to 600 lb (max door width of 4'0"), rivet nuts are required in the frame in addition to the frame reinforcement. G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts Material Substrate 600 Series 600 Grey primer paint Hospital tips (HT) for standard models. The standard hospital tip option includes an angle machined channel cover and bearing to provide a flush angled surface. A38 Must be ordered in exact lengths. Available on 600 and 700 series hinges. Ives Architectural hardware products Pin and barrel hinges A39 Hinges & pivots Mounting hardware Standard Hardware 600/602/611/700/702/705/711/715 10 x 1/2" Stainless self drilling / self tapping phillips head screw 10 x 1" Stainless phillips head wood screw ( 1/2 pkg for door or frame) 700CS/711CS/715CS 12-24 x 3/4" Stainless self drilling / self tapping phillips head screw Security screws - hollow metal door and frame (SECHM) 12-24 x 1/2" Stainless security head machine screw B 10 X 1/2" Stainless steel Torx security screw 700CS/711CS/715CS Pulls & plates 600/700/602/702/705/611/711/715 Security screws - 1/2 wood, 1/2 hollow metal (SECWDHM) 600/700/602/702/705/611/711/715 10 X 1/2" Stainless steel Torx security screw 10 x 1" Stainless Torx security wood screw Security screws - 1/2 wood, 1/2 hollow metal (SECWDWD) 10 x 1" Stainless Torx security wood screw Flush bolts & coordinators 600/700/602/702/705/611/711/715 Wood door and frame (WD) 10 x 1" Stainless phillips head wood screw 700CS/711CS/715CS #12 x 1 1/4" Stainless sheet metal screw C 600/602/611/700/702/705/711/715 D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A39 General information - electrification options Only available for the full mortise hinges Electric power transfer (EPT) availabile on 600, 700, 705, 715, 700CS, 715CS models Electrical through-wire panel with Allegion Connect (TWP) (700CS models only) Electric power transfer provides the most secure and best solution for transferring power from the door frame to the edge of a swinging door. Ives Pin and Barrel Hinges provide standard cut outs to fit Von Duprin EPT- 2, EPT-10 and PNT-1 devices. Consult factory for other electrical cut out options. Door handing is required. The through-wire panel solution works in the CS mortise hinge to maintain the clean aesthetic design of aluminum geared continuous hinges. Made with the same medical grade bearings of Ives other pin and barrel hinges, the CS Series brings throughwire panel innovation to your continuous hinge application while keeping its great looks. Electrical through-wire (TW8) for standard models (600, 700, 705, 715) only The CS Series through-wire panel is a heavy duty, easy-toinstall, stainless steel panel. Tested to 2.5 million cycles, the CS Series panel can quickly slip in and out of the hinge for maintenance and replacement. Recommended for low frequency usage. Provides electric power transfer from the frame to the door cable in order to supply power to an electrified mortise or cylidrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire is rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. A monitor (MON) switch is available as an engineered special. Consult factory for availability. 600/700 TW 600/700 TW TW8 600/700s 600/700 600/700 EPT 600/700/ 700CS Unlike all of the other manufacturer solutions the CS Series through-wire panel maintains a one piece appearance on the cover side of the hinge. It installs with the same 5/16" clearance as aluminum geared hinges and works in all of the decorative cover finishes. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Through-wire panel is rated 50 volts AC/ DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. Ives through-wire hinges are fully compatible with 4 wire and 8 wire installations. Available CON option comes with the Allegion Connect 8-pin Connector which makes it easy to connect to other electrical consumption devices. Top of door Top of door Top of door Top of door E Stops D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates A40 Hinges & pivots Pin and barrel hinges “C L EPT” “C L EPT” “C L TW” “C L TW” Electrical Cutouts Exterior hardware Ives Pin & Barrel Continuous Hinges are available with factory modified cutouts to accommodate most electrical frame to door requirements. Special templates are required. When ordering indicate the following: F 1. Opening size. 2. Handing. LH, RH, LHR or RHR. 3. Manufacturer and model number of the electrical product being used. Example; Von Duprin ETPT2 G Miscellaneous hardware Note: See ordering guide in price book for proper placement. CL = Center line CL = Center line Standard Length 83" EPT TW TWP 30" 43-19/32" 43-13/16" 85" 32" 45-17/32" 44-29/32" 95" 42" 55-17/32" 55-9/32" 120" 67" 80-17/32" 79-1/2" A40 Ives Architectural hardware products Because clearances may vary between door and frame manufacturer, and locations can be influenced by the door hardware it is always recommend contacting Ives Customer Technical for specific template information. For your general information following are standard locations for Von Duprin EPT2 or EPT10, and TW (through-wire). In accordance with industry standards, all cutouts are made from Top Edge of Door to Center Line of Cut-out. Pin and barrel hinges HT US32D 83 TW8 CON A41 700 Hinges & pivots How to order Model Stainless steel Full Surface - Center Pivot 705 Full mortise - full wrap 711/711CS Full surface - swing clear 715/715CS Full mortise - half wrap B Full Mortise 702 Pulls & plates 700/700CS Steel Full mortise 602 Full surface - center pivot 611 Full surface - swing clear Flush bolts & coordinators 600 HT C Option 1 Hospital tip (600 and 700 series only) Finish Latches, catches & bolts Stainless steel - only available on 700 Series US32D Satin stainless steel D Stainless steel / aluminum - only available on CS Series US32DAN Satin stainless anodized USP Grey primer paint US28 Clear aluminum anodized US4AN Satin brass anodized US10AN Satin bronze anodized 313AN Dark bronze anodized 315AN Black anodized US26AN Bright chrome anodized US26DAN Satin chrome anodized E Stops Steel - only available on 600 Series 600 Grey primer paint Length Exterior hardware 83" 85" 95" 120" Other lengths available up to 120”, consult factory. Handing is required. F Option 2 EPT G Miscellaneous hardware TWP TW8 CON SECHM SECWDHM SECWDWD WD Electric power transfer prep (600, 700, 705, 715, 700CS, 715CS models only) Handing (LH and RH) required for 026, 027, 114, and 224 models Through-wire panel (only available on 700CS) Electric through-wire (600, 700, 705, 715 models only) Allegion Connect (600, 700, 705, 715, 700CS models only) Security fasteners - Torx Security fasteners - Torx (half wood, half hollow metal) Security fasteners - Torx (wood door and frame) Wood door fasteners Ives Architectural hardware products A41 A42 Hinges & pivots Pin and barrel hinges Clearance requirements 1/8” Hinge Side Clearance Hinge Side Clearance 3/16” 1/8” Hinge Side Clearance D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates 705 with Adjusta-Stud Consult your local authority having jurisdiction for specific fire codes relating to fire rated doors. The table below is only recommended for non fire related doors. Hinge Side Clearance Hinge Side Clearance 1/32” Frame Irregularity 1/32” Frame Irregularity 1/16” Frame Irregularity 1/16” Frame Irregularity Single door Door under-sizing Model Hinge-side clearance Lock-side clearance Frame irregularity Beveled door clearance Square edged Beveled edged 600 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 602 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 700 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 700CS 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" 702 1/8" 1/8" 1/32" 1/32" 9/32" 5/16" 705 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 705* 1/2" 1/8" 1/32" 1/32" 21/32" 11/16" 711 7/32" 1/8" 1/32" 1/32" 3/8" 13/32" 711CS 3/8" 1/8" 1/32" 1/32" 17/32" 9/16" 715 1/4" 1/8" 1/32" 1/32" 13/32" 7/16" 715CS 5/16" 1/8" 1/32" 1/32" 15/32" 1/2" Model Hinge-side clearance Lock-side clearance Frame irregularity Beveled door clearance Square edge total Square edge each door Beveled edge total Beveled edge each door 600 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 602 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 700 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 700CS 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" 702 1/8" 3/16" 1/16" 1/16" 1/2" 1/4" 9/16" 9/32" 705 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 705* 1/2" 3/16" 1/16" 1/16" 1-1/4" 5/8" 1-5/16" 21/32" 711 7/32" 3/16" 1/16" 1/16" 11/16" 11/32" 3/4" 3/8" 711CS 3/8" 3/16" 1/16" 1/16" 1" 1/2" 1-1/16" 17/32" 715 1/4" 3/16" 1/16" 1/16" 3/4" 3/8" 13/16" 13/32" 715CS 5/16" 3/16" 1/16" 1/16" 7/8" 7/16" 15/16" 15/32" E Stops * Use the Adjusta-Studs with 705 Pair of doors * Use the Adjusta-Studs with 705 G Miscellaneous hardware F Exterior hardware Door under-sizing A42 Ives Architectural hardware products Pin and barrel hinges 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/8” Inset recommended for 1 3/4" doors 48" Maximum door width Non-handed for custom cut lengths Bevel or square edge door A43 Hinges & pivots 600 Full mortise pin and barrel continuous hinge - steel 700 Full mortise pin and barrel continuous hinge - stainless steel Certifications Pulls & plates B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Material C 600 - 1012 Cold-rolled steel 700 - 14 Gauge Type 304 stainless steel Finishes BHMA Description Substrate Finish 600 630 Grey primer paint Satin stainless steel Steel Stainless steel USP US32D Options D HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TW8 . . . . . . . . . . . . . Electrical through-wire CON. . . . . . . . . . . . . . Allegion Connect Optional mounting hardware SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame 1/8" E I ve s 5 0 0 , 6 0 0 , 7 0 0 For pairs of doors see chart and general information Stops For single door applications: Latches, catches & bolts Custom paint available on 600 series, consult factory. Flush bolts & coordinators #10 X 1/2" Self Drilling, Self Tapping Screws #10 X 1" Wood Screws 1/2” 3/8” Exterior hardware 1/8” GA 0.075” Hi n ge T h i ck n es s 2-1/4 ” 1-3/4” F 1/16” 1/4 ” Clearance for G Miscellaneous hardware Square Edge 5/16" Clearance for Beveled Edge Ives Architectural hardware products A43 Pin and barrel hinges Hinges & pivots 700CS Full mortise pin and barrel continuous hinge w/ decorative cover A44 Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Patented, medical grade, nylon winged bearings For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non-handed Bevel or square edge door Pulls & plates Certifications B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators 12-24 X 3/4" Self drilling, self tapping screws Material 14 Gauge Type 304 stainless steel D Latches, catches & bolts C Finishes BHMA Description Substrate Finish 441 600 628 688 709 710 711 712 713 Satin stainless anodized Grey primer paint Clear aluminum anodized Satin brass anodized Satin bronze anodized Dark bronze anodized Black anodized Bright chrome anodized Satin chrome anodized Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Options EPT . . . . . . . . . . . . . . Electric power transfer TW8 . . . . . . . . . . . . . Electrical through-wire CON. . . . . . . . . . . . . . Allegion Connect Optional mounting hardware E Stops SECHM. . . . . . . . . . . Security screws - hollow metal door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: G Miscellaneous hardware F Exterior hardware For pairs of doors see chart and general information A44 Ives Architectural hardware products Pin and barrel hinges 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing Flush mounted, no inset 48" Maximum door width Non-handed for custom cut lengths Bevel or square edge door A45 Hinges & pivots 602 Full surface pin and barrel continuous hinge - steel 702 Full surface pin and barrel continuous hinge - stainless steel Certifications Pulls & plates B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Material C 602 - 1012 Cold-rolled steel 702 - 14 Gauge Type 304 stainless steel Finishes Description Substrate Finish 600 630 Grey primer paint Satin stainless steel Steel Stainless steel USP US32D Options D HT. . . . . . . . . . . . . . . . Hospital tip Latches, catches & bolts BHMA Custom paint available on 600 series, consult factory. Optional mounting hardware Flush bolts & coordinators #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Cover clips SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information 7/16” E 1-3/4” Stops I ve s 6 0 2 , 7 0 2 1-3/4” 3/8” G A 0 .0 7 5 ” Hi n ge T h i ck n es s F Exterior hardware 1-3/4” 1/8” Clearance for Square Edge 5/32" Clearance for Beveled Edge G Miscellaneous hardware Ives Architectural hardware products A45 Pin and barrel hinges Hinges & pivots 705 Full mortise, full wrap pin and barrel continuous hinge - stainless steel A46 Full wrap edge guard Adjustable for undersized and out of square doors 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing Flush mounted, no inset 48" Maximum door width Non-handed, handing required for custom cut lengths Bevel or square edge door Pulls & plates Certifications B Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Material C 14 Gauge Type 304 stainless steel Finishes BHMA Description Substrate Finish 630 Satin stainless steel Stainless steel US32D Custom paint available, consult factory. Latches, catches & bolts Options D HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric Power Transfer TW8 . . . . . . . . . . . . . Electrical through-wire CON. . . . . . . . . . . . . . Allegion Connect Optional mounting hardware SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: I ve s 7 0 5 E Stops For pairs of doors see chart and general information GA 0.075” Hi n ge T h i ck n es s GA 0.0625” 3/8” 1-7/8” Exterior hardware 2-1/4” 1-3/4” Note: Provide 0.125” Adjustment F GA 0.075” 3/4” 3/8 ” 3/16” Miscellaneous hardware 3/8" Clearance for square edge 13/32" Clearance for beveled edge G * Adjusta-Stud allows up to 3/8” width adjustment which ensures proper alignment and easy installation. Adjusta-Stud also makes it possible for future adjustments of the door on the frame through repositioning. If using Ajusta-Stud, 14 gauge reinforcements on frame and door required. A46 Ives Architectural hardware products Edge guard May be difficult to install on inside walls 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 48" Maximum door width Non-handed, handing required for custom cut lengths Square edge door Pulls & plates Certifications A47 Meets ANSI 156.26 UL10C certified B Standard lengths 83", 85", 95", 120" Standard mounting hardware #10 X 1/2" Self drilling, self tapping screws #10 X 1" Wood screws Material C 611 - 1012 cold-rolled steel 711 - 14 Gauge Type 304 stainless steel Finishes Description Substrate Finish 600 630 Grey primer paint Satin stainless steel Steel Stainless steel USP US32D Options D HT. . . . . . . . . . . . . . . . Hospital tip Latches, catches & bolts BHMA Custom paint available on 600 series, consult factory. Optional mounting hardware Flush bolts & coordinators SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: For pairs of doors see chart and general information I ve s 6 1 1 , 7 1 1 E 1-3/8” Stops GA 0.075” Hi n ge T h i ck n es s 3/8” 1/4” 1-9/16” 1-3/4” F 3/4” Exterior hardware 7/32" Clearance for Square Edge 5/32” G Miscellaneous hardware 1 3/8" [34.9] 5/16" [7.9] 1/2" [12.7] [44.5] GA. 0.075" HINGE THICKNESS 3/4" [19.1] 9/16" 1/2" [14.3] [12.7] 1 3/4" 0.060" [1.5] 611 Swing clear pin and barrel continuous hinge - steel 711 Swing clear pin and barrel continuous hinge - stainless steel Hinges & pivots HINGE Pin and barrel hinges Ives Architectural hardware products A47 Pin and barrel hinges Hinges & pivots 711CS Swing clear pin and barrel continuous hinge w/ decorative cover B Pulls & plates A48 Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Edge guard Easy to install mounting location on mortise end of frame 2-11/16" minimum frame face requirement Patented, medical grade, nylon winged bearings For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non-handed, handing required for custom cut lengths Square edge door Certifications Meets ANSI 156.26 UL10C certified Standard lengths Flush bolts & coordinators 83", 85", 95", 120" Standard mounting hardware C 12-24 X 3/4" Self drilling, self tapping screws Material 14 Gauge Type 304 stainless steel D Latches, catches & bolts Finishes BHMA Description Substrate Finish 441 600 628 688 709 710 711 712 713 Satin stainless anodized Grey primer paint Clear aluminum anodized Satin brass anodized Satin bronze anodized Dark bronze anodized Black anodized Bright chrome anodized Satin chrome anodized Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Optional mounting hardware Stops SECHM. . . . . . . . . . . Security screws - hollow metal door and frame WD. . . . . . . . . . . . . . . Wood door and frame E For single door applications: G Miscellaneous hardware F Exterior hardware For pairs of doors see chart and general information A48 Ives Architectural hardware products Pin and barrel hinges Half wrap edge guard 1/4" diameter pin with nylon self-lubricating, medical grade split bearing For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing 1/16" door inset 48" Maximum door width Non-handed, handing required for custom cut lengths Square edge door A49 Hinges & pivots 715 Full mortise, half wrap pin and barrel continuous hinge - stainless steel Certifications B Pulls & plates Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Standard mounting hardware Flush bolts & coordinators #10 X 1/2" Self Drilling, Self Tapping Screws #10 X 1" Wood Screws Material 14 Gauge Type 304 Stainless Steel C Finishes BHMA Description Substrate Finish 630 Satin stainless steel Stainless steel US32D Custom paint available on 600 series, consult factory. Options HT. . . . . . . . . . . . . . . . Hospital tip EPT . . . . . . . . . . . . . . Electric power transfer TW8 . . . . . . . . . . . . . Electrical through-wire CON. . . . . . . . . . . . . . Allegion Connect D Latches, catches & bolts Optional mounting hardware SECHM. . . . . . . . . . . Security screws - hollow metal door and frame SECWDHM. . . . . . .Security screws - 1/2 wood, 1/2 hollow metal SECWDWD. . . . . . Security screws - wood door and frame WD. . . . . . . . . . . . . . . Wood door and frame I ve s 7 1 5 For single door applications: For pairs of doors see chart and general information E Stops GA 0.075” Hi n ge T h i ck n es s 3/8” 1/4” 1-3/4” Exterior hardware F 3/4” 11/4" /4” Clearance for Square Edge 3/8" [9.5] HINGE 3/4" [19.1] [1.5] Miscellaneous hardware GA 0.060" 5/8" [15.9] GA 0.075" HINGE THICKNESS 2" [50.8] G 1/4" [6.4] HINGE ALLOWANCE Ives Architectural hardware products FRAME A49 Pin and barrel hinges Hinges & pivots 715CS Full mortise, half wrap pin and barrel continuous hinge w/ decorative cover Pulls & plates A50 Patented cover protects hinge knuckle and creates a cleaner and neater appearance XY adjustability feature allows for better door alignment during installation Half wrap edge guard Patented, medical grade, nylon winged bearings For doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing Flush mounted, no inset 48" Maximum door width Non-handed, handing required for custom cut lengths Square edge door B Certifications Meets ANSI 156.26 UL10C certified Standard lengths 83", 85", 95", 120" Flush bolts & coordinators Standard mounting hardware 12-24 X 3/4" Self drilling, self tapping screws Material C 14 Gauge Type 304 stainless steel D Latches, catches & bolts Finishes BHMA Description Substrate Finish 441 600 628 688 709 710 711 712 713 Satin stainless anodized Grey primer paint Clear aluminum anodized Satin brass anodized Satin bronze anodized Dark bronze anodized Black anodized Bright chrome anodized Satin chrome anodized Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel Aluminum/Steel US32DAN USP US28 US4AN US10AN 313AN 315AN US26AN US26DAN Custom paint available, consult factory. Standard custom paint is on cover only. Specify if paint on whole hinge is needed. Options EPT . . . . . . . . . . . . . . Electric power transfer Optional mounting hardware E Stops SECHM. . . . . . . . . . . Security screws - hollow metal door and frame WD. . . . . . . . . . . . . . . Wood door and frame For single door applications: G Miscellaneous hardware F Exterior hardware For pairs of doors see chart and general information A50 Ives Architectural hardware products Pivots A51 Hinges & pivots The door rests on the bottom pivot in this application. This reduces the stress on the frame by distributing the weight of the door throughout the floor and structure. By taking advantage of the strength of the structure, Used in conjunction with rescue hardware, center hung pivots allows B pocket pivots also provide an aesthetic option for your opening. Pulls & plates this makes a pivot the ideal solution for your heavy doors. Center and a bi-directional door swing in emergency situations. When a patient depresses allowing the door to swing in the opposite direction without C causing damage to the frame. Flush bolts & coordinators becomes trapped behind an inward swing door, the center tong D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A51 A52 Hinges & pivots Pivots General information Complete line of 3/4" offset, 1-1/2" offset, center hung, intermediate and power transfer pivots with all exposed parts made of brass or stainless steel for maximum corrosion resistance. Designed for heavy weight doors in high frequency(above 1250 cycles per day) applications. FINISHES D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates UL LISTED Ives non-rated brass Pivots are tested and approved UL 10C (20 min) as noted on model. Ives rated stainless steel Pivots are tested and approved UL 10C (3 hrs) as noted on model. MATERIAL High strength brass and 304 series stainless steel forgings, and castings for rated and non-rated doors combined with radial and needle precision bearings for smooth operation. See specific models for more information. PIVOT DUTY Last digit in pivot set number reflects the maximum door weight in hundreds of pound, e.g., 7215 = 500 pounds. For sets designated as “heavy duty”, add 1,000 pounds, e.g., 7237F HD set = 1700 pounds. Pivots for lead lined doors are available. Verify location and size of lead lining in door to determine product compatibility. Consult product support. See table below for selecting the proper pivot for the application. Add additional Intermediate Pivots for each 100 pounds of door weight and/or for doors exceeding 7' in height. Intermediate pivots should be placed every 2'6" as needed. E Stops MOUNTING HARDWARE Stainless steel machine screws and wood screws standard for all metal door and frames and metal frame/wood door applications. Positive locking vertical adjustment mechanism allows the installer to precisely position the door and balance the load. A52 F Exterior hardware G Miscellaneous hardware Pivot type Bottom style mounting 3/4" Offset Jamb mounted 3/4" Offset Jamb mounted 3/4" Offset Jamb mounted 3/4" Offset Jamb mounted 3/4" Offset Floor mounted 3/4" Offset Floor mounted 3/4" Offset Floor mounted 3/4" Offset Mortise cement case 3/4" Offset Mortise cement case 3/4" Offset Floor mounted 3/4" Offset Mortise cement case 1-1/2" Offset Floor mounted 1-1/2" Offset Mortise cement case Center hung Floor mounted Center hung Floor mounted Center hung Jamb mounted Center hung Mortise cement case Center hung Mortise cement case Description Substrate Finish 600 605 606 612 613 619 622 625 626 629 630 631 632* 639* 640** 646** 643e/716 689 691 695 706 Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Bright stainless Satin brass Matte black Satin brass Satin bronze Oil rubbed bronze Satin nickel Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Brass Brass Brass Brass Brass Brass Brass Brass Stainless steel Stainless steel Stainless steel Steel Steel Steel Steel Brass/Stainless Brass/Stainless Brass/Stainless Brass/Stainless Brass/Stainless USP US3 US4 US10 US10B US15 BLK US26 US26D US32* US32D* BLK US3 US10 US10B US15 643e/716 SP28 SP10 SP313 SP4 * Available on F fire-rated pivots and pocket pivots only. ** Available on pocket pivots only For other colors, consult product support. ELECTRIFICATION OPTIONS Electrified pivots are non-load bearing. Provides electric power transfer from the frame to the door in order to supply power to an electrified mortise or cylindrical locks, exit devices with electric latch retraction, and/or electric strikes (pairs of doors). Each wire is 28 AWG and rated 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse. Maximum pulse 400 milliseconds. The Ives Power Transfer Intermediate (PT INT) pivots and Electrified Pocket Pivot (E) are available in 4 wire (TW4) or 8 wire (TW8). Supplied standard with Allegion Connect 4 or 8-pin Connector (CON) which makes it easy to connect to other electrical consumption devices. When ordering separate pivot applications, the following descriptions will be used for the pivot. 7200 SERIES PIVOT SELECTION CHART Pivot set 7212 7212V 7215 7215F 7222 7226 7226F 7227 7227F 7230F 7237F 7244F 7245F 7253 7255 7255J 7256 7259 BHMA UL listing 20 Minute 20 Minute 20 Minute 3 Hour 20 Minute 20 Minute 3 Hour 20 Minute 3 Hour 3 Hour 3 Hour 3 Hour 3 Hour none none none none none Ives Architectural hardware products Max. door weight 200 200 500 500 200 600 600 700 700 1,000 1,750 400 500 300 500 500 600 1,000 Handing LH or RH LH or RH LH or RH LH or RH LH or RH Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Non-handed Top 7212-7215-7222-7226-7227 TOP 7212V TOP 7212-7215-7222-7226-7227 TOP 7215F-7226F-7227F TOP 7212-7215-7222-7226-7227 TOP 7212-7215-7222-7226-7227 TOP 7215F-7226F-7227F TOP 7212-7215-7222-7226-7227 TOP 7215F-7226F-7227F TOP 7230F-7237F TOP 7230F-7237F TOP 7244F-7245F TOP 7244F-7245F TOP 7253-7255-7255J-7256 TOP 7253-7255-7255J-7256 TOP 7253-7255-7255J-7256 TOP 7253-7255-7255J-7256 TOP 7259 TOP Bottom 7212 BTM 7212 BTM 7215 BTM 7215F BTM 7222 BTM 7226 BTM 7226F BTM 7227 BTM 7227F BTM 7230F BTM 7237F BTM 7244F BTM 7245F BTM 7253 BTM 7255 BTM 7255J BTM 7256 BTM 7259 BTM Intermediate 7212-7212V-7222 INT 7212-7212V-7222 INT 7215-7226-7227 INT 7215F-7226F-7227F INT 7212-7212V-7222 INT 7215-7226-7227 INT 7215F-7226F-7227F INT 7215-7226-7227 INT 7215-7226-7227 INT 7215F-7226F-7227F INT 7230F-7237F INT 7230F-7237F INT 7244F-7245F INT 7244F-7245F INT none none none none Pivots - SET - LH - US3 A53 7212 Hinges & pivots How to order Model 7212 7212V Pulls & plates 7215 7215F B 7222 7226 7226F 7227 7227F Flush bolts & coordinators 7230F 7237F 7244F C 7245F 7253 7255 7255J 7256 Latches, catches & bolts 7259 91105F E91105F D Style SET TOP BTM INT PT INT Top and bottom set Top pivot only Bottom pivot only Intermediate pivot only Power transfer intermediate pivot only Left hand door Right hand door E LH RH Stops Handing Required on 7212, 7212V, 7222, all INT, and all PT INT. Finish Finish USP US3 US4 US10 US10B US15 BLK US26 US26D US32 US32D 643e/716 SP28 SP10 SP313 SP4 F G Miscellaneous hardware Description Primer paint Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Bright stainless Satin brass Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Exterior hardware BHMA 600 605 606 612/639 613 619 622/631 625 626 629 630 643e/716 689 691 695 706 Note: Please view specific models for info on availability. Ives Architectural hardware products A53 7212 3/4" Offset pivot, 200lb with top header mount Top B Pulls & plates A54 Hinges & pivots Offset pivots Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7212 Set (7212 Top and 7212 Btm) 7212 Top (7212-7215-7222-7226-7227 Top), header mount 7212 Btm (7212 Btm), jamb mount Certifications Available accessory items Meets ANSI/BHMA A156.4 C07131 UL Listed, 20 minute fire doors Use 7212 INT (7212-7212V-7222) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Material substrate Btm Made from cast brass 7212V 3/4" Offset pivot, 200lb with top jamb mount D Latches, catches & bolts C Flush bolts & coordinators See finishes below Top Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7212V Set (7212V Top and 7212 Btm) 7212V Top (7212V), jamb mount 7212 Btm (7212 Btm), jamb mount Certifications Available accessory items Meets ANSI/BHMA A156.4 C07131 UL Listed, 20 minute fire doors Use 7212 INT (7212-7212V-7222) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Made from cast brass Btm Exterior hardware E Stops Material substrate See finishes below. G Miscellaneous hardware F 7212 and 7212V Finishes BHMA Description Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. A54 Ives Architectural hardware products Offset pivots 7215 Pivot Set 7215F Pivot Set 7215 - Made from cast brass 7215F - Made from 304 series stainless steel Available accessory items C D Latches, catches & bolts Use 7215 INT (7215-7226-7227) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Use 7215F INT (7215F-7226F-7227F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For electrical applications, use 7215PT INT (7215-7226-7227 PT INT) or 7215FPT INT (7215F-7226F-7227F PT INT) Power Transfer Intermediate pivot. For additional electrical wiring applications, consult product support. Flush bolts & coordinators Material substrate Meets ANSI/BHMA A156.4 C07131 7215 - UL Listed, 20 minute fire doors 7215F - UL Listed, 3 hour fire doors B Certifications Pulls & plates Btm Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7215 Set (7215 Top and 7215 Btm) 7215 Top (7212-7215-7222-7226-7227 Top), header mount 7215 Btm (7215 Btm), jamb mount 7215F Set (7215F Top and 7215F Btm) 7215F Top (7215F-7226F-7227F Top), header mount 7215F Btm (7215F Btm), jamb mount Optional WP resistant bottom pivot is modified for improved corrosion resistance Available in US26D (626) or US32D (630) only A55 Top Hinges & pivots 7215 3/4" Offset pivot, 500lb with top header mount 7215F 3/4" Offset pivot, 500lb with top header mount, fire rated 7215 Finishes Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 F Exterior hardware Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted E Description 605 606 612 613 619 622 625 626 --689 691 695 706 Stops BHMA 7215F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Ives Architectural hardware products G Description 629 630 631 632 639 --689 691 695 706 Miscellaneous hardware BHMA A55 Offset pivots A56 Hinges & pivots 7222 3/4" Offset pivot, 200lb with top header mount and bottom base mount B Pulls & plates Top Maximum door load 200 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Handed LH or RH 7222 Set (7222 Top and 7222 Btm) 7222 Top (7212-7215-7222-7226-7227 Top), header mount 7222 Btm (7222 Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07162 UL Listed, 20 minute fire doors Made from cast brass Available accessory items Use 7222 INT (7212-7212V-7222) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Latches, catches & bolts C Flush bolts & coordinators Btm E Stops D 7222 Finishes BHMA Description Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A56 Ives Architectural hardware products Offset pivots 7226 - Made from cast brass 7226F - Made from 304 series stainless steel Available accessory items C Use 7226 INT (7215-7226-7227) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Use 7226F INT (7215F-7226F-7227F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For electrical applications, use 7226PT INT (7215-7226-7227 PT INT) or 7226FPT INT (7215F-7226F-7227F PT INT) Power Transfer Intermediate pivot. For additional electrical wiring applications, consult product support. Flush bolts & coordinators Material substrate Meets ANSI/BHMA A156.4 C07162 7226 - UL Listed, 20 minute fire doors 7226F - UL Listed, 3 hour fire doors B Certifications Pulls & plates Btm Maximum door load 600 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7226 Set (7226 Top and 7226 Btm) 7226 Top (7212-7215-7222-7226-7227 Top), header mount 7226 Btm (7226 Btm), base plate mount 7226F Set (7226F Top and 7226F Btm) 7226F Top (7215F-7226F-7227F Top), header mount 7226F Btm (7226F Btm), base plate mount A57 Top Hinges & pivots 7226 3/4" Offset pivot, 600lb with top header mount and bottom base mount 7226F 3 /4" Offset pivot, 600lb with top header mount and bottom base mount, fire rated D Latches, catches & bolts 7226 Finishes 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 7226F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Ives Architectural hardware products G Description 629 630 631 632 639 --689 691 695 706 Miscellaneous hardware BHMA F Finish Exterior hardware Substrate E Description Stops BHMA A57 Offset pivots A58 Hinges & pivots 7227 3/4" Offset pivot, 700lb with top header mount and bottom base mount 7227F 3/4" Offset pivot, 700lb with top header mount and bottom base mount, fire rated Flush bolts & coordinators B Pulls & plates Top Maximum door load 700 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7227 Set (7227 Top and 7227 Btm) 7227 Top (7212-7215-7222-7226-7227 Top), header mount 7227 Btm (7227 Btm), base plate mount 7227F Set (7227F Top and 7227F Btm) 7227F Top (7215F-7226F-7227F Top), header mount 7227F Btm (7227F Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07121 7227 - UL Listed, 20 minute fire doors 7227F - UL Listed, 3 hour fire doors 7227 - Made from cast brass 7227F - Made from 304 series stainless steel Available accessory items Use 7227 INT (7215-7226-7227) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. Use 7227F INT (7215F-7226F-7227F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For electrical applications, use 7227PT INT (7215-7226-7227 PT INT) or 7227FPT INT (7215F-7226F-7227F PT INT) Power Transfer Intermediate pivot. For additional electrical wiring applications, consult product support. D Latches, catches & bolts C Btm F Exterior hardware E Stops 7227 Finishes BHMA Description Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware 7227F Finishes For other colors, consult factory. A58 Ives Architectural hardware products Offset pivots Maximum door load 1000 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7230F Set (7230F Top and 7230F Btm) 7230F Top (7230F-7237F Top), header mount 7230F Btm (7230F Btm), base plate mount Made from 304 series stainless steel Available accessory items C Flush bolts & coordinators Btm Use 7230F INT (7230F-7237F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. For electrical applications, use 7230FPT INT (7230F-7237F PT INT) Power Transfer Intermediate pivot. B Material substrate Meets ANSI/BHMA A156.4 C07162 UL Listed, 3 hour fire doors Pulls & plates Certifications A59 Top 3 /4" Offset pivot, 1000lb with top header mount and bottom base mount, fire rated Hinges & pivots 7230F D Latches, catches & bolts 7230F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 E Description 629 630 631 632 639 --689 691 695 706 Stops BHMA For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A59 Offset pivots A60 Hinges & pivots 7237F 3 /4" Offset pivot, 1750lb with top header mount and bottom base mount, fire rated B Pulls & plates Top Maximum door load 1750 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7237F Set (7237F Top and 7237F Btm) 7237F Top (7230F-7237F Top), header mount 7237F Btm (7237F Btm), mortised cement case mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07111 UL Listed, 3 hour fire doors Made from 304 series stainless steel Available accessory items D Latches, catches & bolts C Flush bolts & coordinators Btm Use 7237F INT (7230F-7237F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. For electrical applications, use 7237FPT INT (7230F-7237F PT INT) Power Transfer Intermediate pivot. E Stops 7237F Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A60 Ives Architectural hardware products Offset pivots Maximum door load 400 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7244F Set (7244F Top and 7244F Btm) 7244F Top (7244F-7245F Top), header mount 7244F Btm (7244F Btm), base mount Made from 304 series stainless steel Available accessory items Btm Use 7244F INT (7244F-7245F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. B Material substrate Meets ANSI/BHMA A156.4 C07162 UL Listed, 3 hour fire doors Pulls & plates Certifications A61 Top Hinges & pivots 7244F 1 1/2" Offset pivot, 400lb with top header mount and bottom base mount, fire rated C Flush bolts & coordinators D Latches, catches & bolts 7244F Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 E Description 629 630 631 632 639 --689 691 695 706 Stops BHMA For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A61 Offset pivots A62 Hinges & pivots 7245F 1 1/2" Offset pivot, 500lb with top header mount and bottom base mount, fire rated B Pulls & plates Top Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Vertical adjustment range 3/16", with positive locking Non-handed 7245F Set (7245F Top and 7245F Btm) 7245F Top (7244F-7245F Top), header mount 7245F Btm (7245F Btm), mortised cement case mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07121 UL Listed, 3 hour fire doors Made from 304 series stainless steel Available accessory items D Latches, catches & bolts C Flush bolts & coordinators Btm Use 7245F INT (7244F-7245F) Intermediate Pivot (handed) as needed. See General Information for specifics on how many intermediate pivots are recommended. For additional electrical wiring applications, consult product support. E Stops 7245F Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F Exterior hardware For other colors, consult factory. A62 Ives Architectural hardware products Intermediate pivots NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult Intermediate Pivot product support. Use for door heights over 7'0" and one every 2'6" as needed. A63 7212V-7222 INT 7212-7212V-7222 INT 3/4" Offset intermediate pivot This intermediate pivot is used with 7212, 7212V, and 7222 offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Made from cast brass B Material substrate Meets ANSI/BHMA A156.4 C07382 UL Listed, 20 minute fire doors Pulls & plates Intermediate Pivot 7212V-7222 INT Certifications Hinges & pivots Intermediate Pivot Intermediate Pivot 7212V-7222 INT 7212V-7222 INT C Flush bolts & coordinators D Latches, catches & bolts 7212-7212V-7222 INT Finishes Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 E Description Stops BHMA For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A63 NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult product support. Use for door heights over 7'0" and one every 2'6" as needed. Intermediate Pivot 7215-7226-7227 INT 7215F-7226F-7227F INT B Pulls & plates A64 Hinges & pivots Intermediate Pivot 7215-7226-7227 INT Intermediate Pivots 7215F-7226F-7227F INT 7215-7226-7227 INT 3/4" Offset intermediate pivot Intermediate Pivot 7215F-7226F-7227F INT 3/4" Offset intermediate pivot, fire rated 7215-7226-7227 INT 7215-7226-7227 intermediate pivot is used with 7215, 7226, and 7227 offset pivots. 7215F-7226F-7227F intermediate pivot is used with 7215F, 7226F, and 7227F offset pivots. 7215F-7226F-7227F INT Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Certifications Flush bolts & coordinators 7215-7226-7227 - Meets ANSI/BHMA A156.4 C07321 7215-7226-7227 - UL Listed, 20 minute fire doors 7215F-7226F-7227F - Meets ANSI/BHMA A156.4 C07371 7215F-7226F-7227F - UL Listed, 3 hour fire doors Material substrate D Latches, catches & bolts C Intermediate Pivot 7215-7226-7227 INT 7215F-7226F-7227F INT 7215-7226-7227 - Made from cast brass 7215F-7226F-7227F - Made from 304 series stainless steel F Exterior hardware E Stops 7215-7226-7227 INT Finishes BHMA Description Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware 7215F-7226F-7227F INT Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. A64 Ives Architectural hardware products Intermediate Pivots Intermediate Pivot 7230F-7237F INT 3/4" Offset intermediate pivot, fire rated This intermediate pivot is used with 7230F and 7237F offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Made from 304 series stainless steel Intermediate Pivot 7230F-7237F INT B Material substrate Meets ANSI/BHMA A156.4 C07311 UL Listed, 3 hour fire doors Pulls & plates Certifications A65 NFPA 80, Section 3-3.8 requires intermediate pivot on some fire door applications, consult Intermediate Pivot product7230F-7237F support. UseINT for door heights over 7'0" and one every 2'6" as needed. Hinges & pivots Intermediate Pivot 7230F-7237F INT 7230F-7237F INT C Flush bolts & coordinators Intermediate Intermediate PivotPivot 7244F-7245F 7244F-7245F INT INT Intermediate Pivot 7244F-7245F INT Certifications Material substrate Meets ANSI/BHMA A156.4 C07371 UL Listed, 3 hour fire doors Made from 304 series stainless steel E Stops Intermediate Pivot 7244F-7245F INT D This intermediate pivot is used with 7244F and 7245F offset pivots Use for door weight over the pivot set limit. Use one additional pivot for every additional 100 pounds. Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Latches, catches & bolts 7244F-7245F INT 1 1/2" Offset intermediate pivot, fire rated F Exterior hardware 7230F-7237F INT and 7244F-7245F INT Finishes Substrate Finish Bright stainless Satin stainless Matte black Bright brass Satin bronze Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US32 US32D BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Ives Architectural hardware products G Description 629 630 631 632 639 --689 691 695 706 Miscellaneous hardware BHMA A65 Intermediate Pivots Hinges & pivots 7215PT-7226PT-7227PT INT 3/4" Offset power transfer intermediate pivot A66 7215FPT-7226FPT-7227FPT INT 3/4” Offset power transfer intermediate pivot, fire-rated 7215PT-7226PT-7227PT intermediate pivot is used with 7215, 7226, and 7227 offset pivots 215FPT-7226FPT-7227FPT intermediate pivot is used with 7215F, 7226F, 7227F offset pivots Non-load bearing Available in 28 gauge TW4 or TW8. For additional electrical wiring applications, consult product support. Rated 50 VDC or VAC @ 3.5 amps. Continuous or 16 amp pulse, maximum pulse 400 milliseconds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Flush bolts & coordinators B Pulls & plates Certifications Material substrate 7215PT-7226PT-7227PT - UL Listed, 20 minute fire doors 7215FPT-7226FPT-7227FPT - UL Listed, 3-hour fire doors Meets UL 634 7215PT-7226PT-7227PT - Offered in brass substrate 7215FPT-7226FPT-7227FPT - Offered in stainless steel D Latches, catches & bolts C 7215PT-7226PT-7227PT INT Finishes BHMA Description Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 For other colors, consult factory. Exterior hardware E Stops 7215FPT-7226FPT-7227FPT INT Finishes BHMA Description Substrate Finish 629 630 631 632 639 --689 691 695 706 Polished stainless steel Satin stainless steel Matte black Bright brass Satin bronze plated Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel US32 US32D F-BLK US3 US10 643e/716 SP28 SP10 SP313 SP4 G Miscellaneous hardware F For other colors, consult factory. A66 Ives Architectural hardware products Intermediate Pivots B UL Listed, 3-hour fire doors Meets UL 634 Pulls & plates Certifications A67 7230FPT-7237FPT INT 3/4” fire rated intermediate pivot is used with 7230F, 7237F offset pivots. Non-load bearing Available in with 28 gauge TW4 or TW8. For additional electrical wiring applications, consult product support. Rated 50 VDC or VAC @ 3.5 amps. Continuous or 16 amp pulse, maximum pulse 400 milliseconds Recommended for use with 1-3/4" minimum door thickness, with 1/8" bevel in 2" Handed LH or RH Hinges & pivots 7230FPT - 7237FPT INT 3/4" Offset power transfer intermediate pivot, fire rated Material substrate Offered in stainless steel substrate Substrate Finish 629 630 631 632 639 --689 691 695 706 Polished stainless steel Satin stainless steel Matte black Bright brass Satin bronze plated Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel US32 US32D F-BLK US3 US10 643e SP28 SP10 SP313 SP4 D Latches, catches & bolts Description C BHMA Flush bolts & coordinators 7230FPT - 7237FPT INT Finishes For other colors, consult factory. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A67 7253 Pivot Set Center hung pivots Hinges & pivots 7253 Center hung pivot, 300lb with bottom base mount Pulls & plates A68 B Top Maximum door load 300 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7253 Set (7253 Top and 7253 Btm) 7253 Top (7253-7255-7255J-7256 Top), header mount 7253 Btm (7253 Btm), base plate mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07032 Made from cast brass Dimensions C Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). 7253 Finishes BHMA Latches, catches & bolts Btm D Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) 605 606 7253 612 613 619 622 625 626 --689 691 695 706 Description Bright brass Satin brass Pivot SetSatin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted E Stops For other colors, consult factory. G Miscellaneous hardware F Exterior hardware 3 Pivot Set A68 Ives Architectural hardware products Substrate Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 Center hung pivots 7255 Pivot Set Top Material substrate Meets ANSI/BHMA A156.4 C07032 Made from cast brass B Certifications Dimensions BHMA 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Finish Bright brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 Satin brass 7255 Pivot Set Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted D Clearance Depth of Mortise Substrate Latches, catches & bolts Table D 605 606 612 613 619 622 625 626 --689 691 695 706 Description C 7255 Finishes Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm)to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). Btm Pulls & plates Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7255 Set (7255 Top and 7255 Btm) 7255 Top (7253-7255-7255J-7256 Top), header mount 7255 Btm (7255 Btm), base plate mount A69 Hinges & pivots 7255 Center hung pivot, 500lb with bottom base mount For other colors, consult factory. E Stops 7255 Pivot Set F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A69 7255J Pivot Set 7255J Pivot Set 7255J Center hung pivot, 500lb with bottom jamb mount A70 Hinges & pivots Center hung pivots B Pulls & plates Top Maximum door load 500 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7255J Set (7255J Top and 7255J Btm) 7255J Top (7253-7255-7255J-7256 Top), header mount 7255J Btm (7255J Btm), jamb mount Certifications Material substrate Meets ANSI/BHMA A156.4 C07042 Made from cast brass Dimensions C Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). Btm 7255 Finishes Latches, catches & bolts BHMA D Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) 605 606 612 613 619 622 625 626 --689 691 695 706 Description Bright brass 7255J Pivot Set Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Stops For other colors, consult factory. G Miscellaneous hardware F Exterior hardware E 7255J Pivot Set A70 Ives Architectural hardware products Substrate Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 7256 Pivot Set Center hung pivots Top Material substrate Meets ANSI/BHMA A156.4 C07021 Made from cast brass B Certifications Dimensions C 7256 Finishes 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) Description Substrate Finish 605 606 612 613 619 622 625 626 --689 691 695 706 Bright brass Satin brass 7256Satin Pivot Set bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 D Clearance Depth of Mortise BHMA Latches, catches & bolts Table D Flush bolts & coordinators Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). Btm Pulls & plates Maximum door load 600 pounds Recommended for use with 1-3/4" minimum door thickness Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7256 Set (7256 Top and 7256 Btm) 7256 Top (7253-7255-7255J-7256 Top), header mount 7256 Btm (7256 Btm), base plate mount A71 Hinges & pivots 7256 Center hung pivot, 600lb with bottom base mount For other colors, consult factory. E Stops 56 Pivot Set F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products A71 7259 Pivot Set Center hung pivots Hinges & pivots 7259 Center hung pivot, 1000lb with bottom base mount A72 Maximum door load 1000 pounds Recommended for use with 2" to 3" minimum door thickness, consult product support if doors are thicker than 3" Not recommended for doors larger than 4'0" X 8'0" Easy installation, tilt on bearing and bearing pin Adjustable floor to door clearance 3/16" to 3/4", consult product support if greater than 3/4" Vertical adjustment range 3/16", with positive locking Non-handed 7259 Set (7259 Top and 7259 Btm) 7259 Top (7259 Top) header mount 7259 Btm (7259 Btm), base frame mount B Pulls & plates Top Certifications Material substrate Meets ANSI/BHMA A156.4 C07011 Made from cast brass Flush bolts & coordinators Dimensions Radius Stop (A) to clear heel of door edge. Pivot distance (B) 1-3/4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5/8" (41mm) minimum recommended. Clearance from bottom edge of door to floor mounting surface is adjustable from 3/16" (5mm) to 3/4" (19mm) by varying the depth of the mortise (C ) in the bottom of the door, refer to Chart D. Consult product support when clearance is over 3/4" (19mm). C Btm 7259 Finishes Latches, catches & bolts BHMA D Table D Clearance Depth of Mortise 3/16" (5mm) 3/8" (10mm) 1/2" (13mm) 5/8" (16mm) 3/4" (19mm) 1-3/16" (30mm) 1" (25mm) 7/8" (22mm) 3/4" (19mm) 5/8" (16mm) 605 606 612 613 619 622 625 626 --689 691 695 706 Description Substrate Finish Bright brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK 625 626 643e/716 SP28 SP10 SP313 SP4 Satin brass 7259 Pivot Set Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Aluminum painted Bronze painted Dark bronze painted Brass painted E Stops For other colors, consult factory. G Miscellaneous hardware F Exterior hardware 7259 Pivot Set A72 Ives Architectural hardware products Pocket pivots Maximum door load of 90 pounds per pivot Use three pivots for doors 7'0" tall and one every 2'6" for taller doors as needed Full mortise Recommended for use with 1-3/4" door thickness only Not recommended for doors larger than 4'0" X 8'0" Not recommended for wood frames (must be used with steel frames for fire rating) Allows door to open a full 90° Non-handed Made from 304 series stainless steel B Material substrate Meets ANSI/BHMA A156.4 C07611 UL Listed, 3 hour fire doors Pulls & plates Certifications A73 Hinges & pivots 91105F Pocket pivot/hinge, fire rated 91105F Finishes Substrate Finish Primer painted Bright stainless Satin stainless Bright brass Satin bronze Satin bronze Satin nickel Aged bronze Dark bronze painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel USP US32 US32D US3 US10 US10 US15 643e/716 SP313 C Description 600 629 630 632 639 640 646 --695 Flush bolts & coordinators BHMA For other colors, consult factory. D Latches, catches & bolts Door Portion 1-3/8 1-1/8 1-9/64 1-9/64 E Stops 5-17/32 Pocket Pivot Cutout CL of Door Jamb Portion F Exterior hardware Door Portion 1-1/8 G Miscellaneous hardware Ives Architectural hardware products A73 Pocket pivots Hinges & pivots E91105F Pocket pivot/hinge, power transfer, fire rated Flush bolts & coordinators B Pulls & plates A74 Non-load bearing Available in 28 gauge TW4 or TW8. For additional electrical wiring applications, consult product support. Rated 50 VDC or VAC @ 3.5 amps continuous or 16 amp pulse, maximum pulse 400 milliseconds Full mortise Recommended for use with 1-3/4" door thickness only Not recommended for doors larger than 4'0" X 8'0" Not recommended for wood frames Allows door to open a full 90° Non-handed Standard for Allegion Connect Certifications Material substrate Meets ANSI/BHMA A156.4 C07611 UL Listed, 3 hour fire doors Made from 304 series stainless steel C E91105F Finishes BHMA Description Substrate Finish 600 629 630 632 639 --695 Primer painted Bright stainless Satin stainless Bright brass Satin bronze Aged bronze Dark bronze painted Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Door Portion Stainless steel USP US32 US32D US3 US10 643e/716 SP313 Latches, catches & bolts For other colors, consult factory. D 1-3/8 1-1/8 1-9/64 E Stops 1-9/64 5-17/32 G Miscellaneous hardware F Exterior hardware Pocket Pivot A74 Ives Architectural hardware products Cutout Door Portion CL of Door 1-1/8 Jamb Portion Pulls & plates Protection plates General information...................................................................................................................B2 8400 Commercial protection plates................................................................................... B48 8402 UL Commercial protection plates............................................................................. B48 Pull mounting hardware Edge guards Architectural and decorative pulls Vandal resistant trim Architectural pulls and push bars E Sliding door pulls F Hands-free door pulls Exterior hardware Decorative flush pulls 9264 Offset long door pull, rounded tip............................................................................ B39 9266 Straight long door pull, rounded tip......................................................................... B39 230 Sliding door edge pull.....................................................................................................B69 42 Pocket sliding door bolt....................................................................................................B69 990 Sliding door pull.............................................................................................................. B70 991 Sliding door pull - privacy.................................................................................................B71 Miscellaneous hardware Screen door pull G 8200 Push plate...................................................................................................................... B42 8300 Pull plate, prep for pull (less pull)............................................................................ B42 8302 Pull plate......................................................................................................................... B43 8303 Pull plate......................................................................................................................... B44 8305 Pull plate........................................................................................................................ B45 8311 Pull plate........................................................................................................................... B46 Stops 22 Flush pull - rectangle......................................................................................................... B63 218 Flush pull - small circle.................................................................................................... B63 221 Flush pull - large circle..................................................................................................... B64 222 Flush pull - rectangle...................................................................................................... B64 223 Flush pull - oval................................................................................................................ B65 227 Flush pull - deep well...................................................................................................... B65 Long door pulls Push and pull plates D Flush pulls 919 Decorative flush pull - oval............................................................................................B66 950 Decorative flush pull - rectangle ................................................................................B66 955 Decorative flush pull - square, deep well....................................................................B67 960 Decorative flush pull - rectangle, narrow...................................................................B67 962 Decorative flush pull - rectangle..................................................................................B68 FP101 Hands-Free Foot Pull .................................................................................................B40 AP101 Hands-Free Arm Pull ..................................................................................................B40 OTP300 Plastic Opening Hand Tool...................................................................................B40 OT300 Steel Opening Hand Tool ........................................................................................B40 Latches, catches & bolts 8111-5 Solid door pull................................................................................................................B23 8112-5 Solid door pull...............................................................................................................B23 8121 Solid door pull.................................................................................................................. B24 8169 C Style (tubular series) offset solid door pull..........................................................B25 8181 Georgian 90° offset solid door pull............................................................................ B26 8189 Athens offset tubular door pull...................................................................................B27 8281 Georgian straight solid door pull................................................................................ B28 8312 Plymouth offset solid door pull.................................................................................. B29 8320 Plymouth offset solid door pull................................................................................. B30 8371 Addison flat tip straight solid door pull..................................................................... B31 8372 Camelot steeple tip straight tubular door pull........................................................B32 8373 Brookshire acorn tip straight tubular door pull.......................................................B33 8700 Greenwich arc straight solid door pull..................................................................... B34 8800 Greenwich arc offset solid door pull.........................................................................B35 8848 Latitude straight solid door pull............................................................................... B36 8975 Rhodes straight solid door pull...................................................................................B37 C Decorative pulls VR810-DT with black grip...................................................................................................... B54 VR814-DT without black grip................................................................................................ B54 VR810-NL LHR with black grip............................................................................................. B55 VR810-NL RHR with black grip............................................................................................. B55 VR814-NL LHR without black grip....................................................................................... B55 VR814-NL RHR without black grip....................................................................................... B55 VR810-NL-V with black grip.................................................................................................. B56 VR814-NL-V without black grip............................................................................................ B56 VR900 RHR with black grip...................................................................................................B57 VR900 LHR with black grip....................................................................................................B57 VR904 RHR without black grip.............................................................................................B57 VR904 LHR without black grip..............................................................................................B57 VR900LLP RH with black grip.............................................................................................. B58 VR900LLP LH with black grip............................................................................................... B58 VR904LLP RH without black grip........................................................................................ B58 VR904LLP LH without black grip........................................................................................ B58 VR910-DT with black grip...................................................................................................... B59 VR914-DT without black grip................................................................................................ B59 VR910-NL with black grip......................................................................................................B60 VR914-NL without black grip................................................................................................B60 VR910M-DT with black grip.................................................................................................... B61 VR914M-DT without black grip............................................................................................. B61 VR910M-NL RHR with black grip.......................................................................................... B62 VR910M-NL LHR with black grip.......................................................................................... B62 VR914M-NL RHR without black grip................................................................................... B62 VR914M-NL LHR without black grip.................................................................................... B62 Flush bolts & coordinators 8102HD Solid door pull - 3/4" round..................................................................................... B11 8103HD Solid door pull - 1" round......................................................................................... B12 8103EZHD Solid door pull - 1" round Large 2-1/2" clearance for the accessibility applications............................................ B13 8105 Solid door pull - 1" flattened........................................................................................ B14 8145EZHD 45° Offset solid door pull................................................................................... B15 8190HD 90° Offset solid door pull....................................................................................... B16 8190EZHD 90° Offset solid door pull...................................................................................B17 9100HD Solid push bar............................................................................................................ B18 9103EZHD Solid straight pull/push bar combo (8103EZHD Pull + 9100HD Push)..................................................................................... B19 9145EZHD 45° Offset pull/push bar combo (8145HD pull + 9100HD push).......................................................................................... B20 9190HD Solid 90° Offset pull/push bar combo (8190HD pull + 9100HD push).......................................................................................... B21 9190EZHD Solid 90° Offset pull/push bar combo (8190EZHD pull + 9100HD push).....................................................................................B22 B1 How to order:...............................................................................................................................B9 General information................................................................................................................ B49 Mortise type, Non-mortise type............................................................................................ B51 Overlapping type, Semi-overlap type..................................................................................B52 Standard cutouts......................................................................................................................B53 Pulls & plates Through bolt mounts.................................................................................................................B5 Concealed mounts......................................................................................................................B6 Back to back mounts................................................................................................................. B7 Push/Pull combo mounts.........................................................................................................B8 A Architectural pulls and pushbars heavy duty, solid construction Hinges & pivots Table of contents 25 Screen door pull....................................................................................................................B71 Ives Architectural hardware products B1 A Hinges & pivots Architectural pulls and pushbars heavy duty, solid construction General information ANSI Certified All Ives architectural pulls, push bars, decorative pulls, and long door pulls meet ANSI 156.06 ADA Compliant pulls (EZ) Material All architectural pulls, push bars and decorative pulls are made of heavy duty, solid bar stock or castings. All long door pulls are made from tubular stock. Available material substrates are below. See pull model detailed pages for material availability. Stainless Steel 304 Series Stainless Steel 316 Series (Standard for all EZ pulls, EZ push/pull combo, and long door pulls. Available on 9100 series push bars as well.) Brass Aluminum 6061-T6 Alloy Care and maintenance for stainless steel finishes Stainless steel requires periodic cleaning just as other materials do when in service. Stainless architectural building components, for instance, are subject to road salt spray at ground level and deposits from polluted urban air at higher levels. Finger marks, deposits from tobacco smoke, stains from hard water or food left on to dry all detract from the original attractive appearance of stainless steel applications. Cleaning methods and the frequency with which there are employed vary considerably according to application. One of the outstanding features of stainless steel is the ease with which its fine appearance can be maintained. In many instances, only periodic warm water wash is sufficient to restore the original shine. In other cases, cleansing with a strong sterilizing solution may be required more frequently. Between these extremes are a broad range of cleaning requirements and methods. In all cases, there are some important “do’s and dont’s” that should be followed. Don't Don’t use ordinary steel wool or other metal scrapers to remove stubborn dirt. Don’t allow dirt to accumulate. Don’t allow protective coatings to remain on new building components. Remove all traces of adhesive as well as plaster, terrazzo, paint and other construction “splashes”. Don’t use harsh, untested cleaners. Heavy duty All Ives architectural pulls, push bars and long door pulls come standard with heavy duty (HD) machining and mounting hardware to withstand high traffic and abuse applications which exceed industry standards. Many decorative pulls also come standard with heavy duty machining and hardware. Please see the list of pulls that come standard with heavy duty mounting hardware. G Miscellaneous hardware F E Stops Do Wash regularly with warm water and mild soap detergent using a clean cloth or soft brush. Remove stubborn grime using recommended cleaners and methods. Always clean in the direction of the original polish lines. Always rinse after cleaning and wipe dry. Exterior hardware D Latches, catches & bolts C Flush bolts & coordinators B2 Pulls & plates All Ives ADA compliant pulls (reference local authority having jurisdiction) come with the EZ designation. These pulls all have a door to pull clearance of 2.1/2" or greater. All stainless steel EZ pulls come standard with 316 Series Stainless which make them highly recommended for all external applications. B2 Ives Architectural hardware products Architectural and decorative pulls Decorative A Architectual Long door pull Model Heavy duty machining Model Heavy duty machining Model Heavy duty machining 5/16-18 8169 3/8-16 9264 3/8-16 3/8-16 8181 3/8-16 9266 3/8-16 8103EZHD 3/8-16 8281 3/8-16 8145EZHD 3/8-16 8189 3/8-16 8190HD 3/8-16 8312 3/8-16 8190EZHD 3/8-16 8320 3/8-16 9100HD 3/8-16 8371 3/8-16 9103EZHD 3/8-16 8372 5/16-18 9145EZHD 3/8-16 8373 5/16-18 9190HD 3/8-16 8700 5/16-18 9190EZHD 3/8-16 8800 5/16-18 8848 3/8-16 8975 3/8-16 B3 Pulls & plates 8102HD 8103HD C D 5 5-1/4" (8111 and 8112 Pulls Only), 5-3/4" (8121) 6 6" (8102HD and 8105 Only) 8 8" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8190HD, 8190EZHD Only) 9 9" (8700 and 8800 Only) 0 10" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8169, 8190HD, 8190EZHD Only) 2 12" (8103HD, 8103EZHD, 8145EZHD, 8169, 8181, 8190HD, 8190EZHD, 8281, 8312, 8371, 8372, 8373, 8700, 8800, 8848, 8975 Only) 18" (8103EZHD, 8145EZHD, 8181, 8190HD, 8190EZHD, 8281, 8371, 8372, 8373, 8700, 8800 Only) 20" (8320 Only) 24 24" (8371, 8372, 8373, 8700, 8800 Only) E 16" (8181 and 8281 Only) Stops 16 18 19-3/16" (8189 Only) Latches, catches & bolts Pull sizes are determined by the center to center distance between the mounting locations. Ex. A 12" pull has 12" between the mounting locations. The overall pull length will be longer. See pull model detailed pages for specific size information. The table below shows standard available sizes for pulls. 19 Flush bolts & coordinators Pulls sizes - center to center 20 Hinges & pivots General information - continued F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B3 General information - continued Custom lengths are available as engineering special, consult customer service. Finishes BHMA Description Substrate US 605 Bright Brass Brass US3 606 Satin Brass Brass US4 612 Satin Bronze Brass US10 613 Oil rubbed Bronze Brass US10B 619 Satin Nickle Brass or Stainless Steel US15 625 Bright Chrome Brass US26 626 Satin Chrome Brass US26D 626-AM* Satin Chrome - Anti-Microbial Brass US26D-AM 628 Satin Aluminium Aluminium US28 629 Buff Stainless Stainless Steel US32D 629-316 Buff Stainless - 316 Substrate Stainless Steel -316 US32D-316 D Latches, catches & bolts C Flush bolts & coordinators B4 Pulls & plates A Hinges & pivots Architectural and decorative pulls 630 Satin Stainless Steel Stainless Steel US32D 630-316 Satin Stainless - 316 Substrate Stainless Steel -316 US32D-316 630-AM** Satin Stainless - Anti-Microbial Stainless Steel US32D-AM --- Aged Bronze Stainless Steel 643e/716 --- Matte black Stainless Steel BLK *AM - Antimicrobial finish. The antimicrobial coating is specifically formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, blocking food and slowing the growth of bacteria, mold and mildew. Product with antimicrobial finishes will maintain the products standard warranty for finishes. High traffic, public use areas are ideally suited to antimicrobial coated door hardware. With hundreds or thousands of people accessing these areas every day, safety should be top of mind. Adding door hardware with an antimicrobial coating can make a difference by inhibiting the growth of bacteria on these high-tough surfaces. Applications where antimicrobial coated hardware makes sense include: Healthcare Education Government Food service Childcare Rest rooms ** Recommend using 630-AM Anti-microbial for highly corrosive environmental applications E Stops Custom finishes are available as engineering special, consult customer service. Door thickness G Miscellaneous hardware F Exterior hardware All Ives architectural pulls, push bars, decorative pulls, and long door pulls come standard with mounting hardware for door thickness ranging from 1-1/2" to 1-3/4". Many pulls have optional mounting hardware for 2" and 2.1/4" thick doors or are available as separate part accessories. See detailed pull model pages for availability. Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B4 Ives Architectural hardware products Pull mounting hardware Through bolt mounts Pull Plate Used with countersunk holes in doors − Wood door applications (2) 2-1/4" steel Flat head mounting screws, plated to match C F Mount - Countersunk holes Flush bolts & coordinators Pull Plate 3/4" Min. Dia. B5 Through-bolt mount with countersunk washers − Hollow metal and wood door applications (2) 3/8-16 x 2 1/4" brass, Flat head mounting screws, plated to match (2) 3/8-16 Countersunk washers, plated to match Pulls & plates STD Mount - Standard mount A All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. Hinges & pivots Mounting sizes D Latches, catches & bolts O Mount - Decorative Decorative through bolt mount − Hollow metal and wood door applications (2) 3/8-16 x 2 1/4" Decorative mounting bolts - machine screw, plated to match E Stops 1" Min. Dia. Q Mount - Decorative, glass doors Decorative through bolt mount − Glass door applications (2) Decorative mounting bolts - machine screw, plated to match (2) Metal and vinyl washers F Exterior hardware Push Side Ives Architectural hardware products G Security through bolt mount with countersunk washers − Hollow metal and wood door applications (2) Flat head security pin in socket mounting screws, plated to match (2) Countersunk washers, plated to match Miscellaneous hardware X Mount - Security B5 Mounting sizes All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. Concealed mounts Reinforcing Plate B6 Pulls & plates A Hinges & pivots Pull mounting methods Concealed mount − Aluminum door applications (2) Mounting bolts - machine screw (2) Set screws Designed to be used with rivet nuts. Not supplied. C Flush bolts & coordinators (1)Set screw A Mount - Aluminum doors Pull Plate G Mount - Pull plate D Latches, catches & bolts Concealed mount with pull plate − Hollow metal and wood door applications Pull mounts directly onto plate, Plate is attached to door (2) 3/8-16 x 5/8" steel Flat head mounting screws E Stops I Mount - Wood doors F Exterior hardware (1)Set screw Concealed mount − Wood door applications (2) Mounting bolts - wood screw (2) Set screws Reinforcing Plate G Miscellaneous hardware L Mount - Hollow metal doors (1)Set screw B6 Ives Architectural hardware products Concealed mount − Hollow metal door applications (2) Mounting bolts - machine screw (2) Set screws Pull mounting methods 3/4" Min. Dia. Pull Side (1)Set screw Back to back mounting - 5/16-18 hardware − Hollow metal and wood door applications (2) Mounting bolts - machine screw (2) Set screws C Back to back mounting - 8-32 hardware − Hollow metal and wood door applications (8) Machine screws (4) Mounting sleeves Flush bolts & coordinators K Mount - 8121 Pull only B7 Push Side J Mount - 8102 Pull only Pulls & plates 3/4" Min. Dia. A Back to back mounts Hinges & pivots Mounting sizes All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. D Latches, catches & bolts 1" Dia. 1" Dia. N Mount E (1)Set screw Back to back mounting - 3/8-16 hardware − Hollow metal and wood door applications (2) Mounting bolts - machine screw (2) Set screws Stops Pull Side Push Side F Exterior hardware 1" Min. Dia. Push Side 1" Min. Dia. Pull Side Back to back mounting - 3/8-16 hardware − Glass door applications (2) Mounting bolts - machine screw (2) Set screws (2) Metal and vinyl washers G Miscellaneous hardware (1)Set screw P Mount - Glass doors Ives Architectural hardware products B7 A Hinges & pivots Pull mounting methods Mounting All mounting hardware is for standard 1-3/4” door. Optional mounting hardware for 2" and 2-1/4" doors for many pulls. See pull detail for availability. Other mounting hardware sizes available as engineering special. Consult Customer Service. Push/Pull combo mounts N Mount Flush bolts & coordinators NO Mount - Decorative Back to back mounting - 3/8-16 hardware (N) & Decorative through bolt (O) − Hollow metal and wood door applications Pushbar to pull − (1) Mounting bolt - machine screw − (1) Set screw Free end pushbar and pull − (2) Decorative mounting bolts - machine screw, plated to match B8 Pulls & plates O Mount C O Mount NS Mount - Standard Latches, catches & bolts STD Mount D N Mount STD Mount E Stops Q Mount Exterior hardware P Mount G Miscellaneous hardware F Q Mount B8 Ives Architectural hardware products Back to back mounting - 3/8-16 hardware (N) & Standard through bolt − Hollow metal and wood door applications Pushbar to Pull − (1) Mounting bolt - machine screw − (1) Set screw Free end pushbar and pull − (2) Flat head mounting screws, plated to match − (2) Countersunk washers, plated to match PQ Mount - Decorative, glass doors Back to back mounting - 3/8-16 hardware (P) & Decorative through bolt (Q) − Glass door applications Pushbar to pull − (1) Mounting bolt - machine screw − (1) Set screw − (1) Metal and vinyl washers Free end pushbar and pull − (2) Decorative mounting bolts - machine screw, plated to match − (2) Metal and vinyl washers Architectural and decorative pulls PR8190EZHD-8 US32D O 1-3/4" Model Center to center Finish Mounting Door thickness PR 8190EZHD 8 US32D N 1-3/4" Single/Pair Single pull machined with standard threads PR Jsgl Pair of pulls - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting (8102 only) Nsgl Single pull machined for back to back mounting Psgl Single pull machined for back to back mounting (glass doors) Pulls & plates “Blank” B9 Model D 5-1/4" (8111), 5-5/8" (8112), 5-3/4" (8121) 6" (8102HD and 8105 only) 8" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8190HD, 8190EZHD only) 9" (8700 and 8800 Only) 10" (8102HD, 8103HD, 8103EZHD, 8105, 8145EZHD, 8169, 8190HD, 8190EZHD only) 12" (8103HD, 8103EZHD, 8145EZHD, 8169, 8181, 8190HD, 8190EZHD, 8281, 8312, 8371, 8372, 8373, 8700, 8800, 8848, 8975 only) 16" (8181 and 8281 only) 18" (8103EZHD, 8145EZHD, 8181, 8190HD, 8190EZHD, 8281, 8371, 8372, 8373, 8700, 8800 only) 19" (8189 only) 20" (8320 only) 24" (8371, 8372, 8373, 8700, 8800 only) E Exterior hardware US3 US4 US10 US10B US15 US26 US26D US260-AM US28 US32D US32D-316 US32D US32D-316 US32D-AM ----- F G Miscellaneous hardware Buff Brass Satin Brass Satin Bronze Antique Bronze Satin Nickel Buff Chrome Satin Chrome Satin Chrome - Anti-Microbial Satin Clear Anodized Buff Stainless Buff Stainless - 316 Substrate Satin Stainless Satin Stainless - 316 Substrate Satin Stainless - Anti-Microbial Aged Bronze Matte black Stops 605 606 612 613 619 625 626 626-AM 628 629 629-316 630 630-316 630-AM 643e/716 BLK Latches, catches & bolts 19 20 24 Finish C 16 18 Flush bolts & coordinators 8102HD Straight pull - 3/4" round 8103HD Straight pull - 1" round 8103EZHD Straight pull - 1" round, ADA compliant 8105 Straight Pull - 1" Flattened 8145EZHD 45° Offset pull - 1" round, ADA compliant 8190HD 90° Offset pull - 1" round 8190EZHD 90° Offset pull - 1" round, ADA compliant 8111 Straight pull 8112 Straight pull - surface mount 8121 Straight pull - surface mount 8169 Offset Tubular pull 8181 Offset Georgian pull 8189 Straight Athens pull 8281 Straight Georgian pull 8312 Offset Plymouth pull 8320 Offset Plymouth pull 8371 Straight Addison pull 8372 Straight Camelot pull 8373 Straight Brookshire pull 8376 Straight Brookshire pull 8700 Straight Greenwich pull 8800 Offset Greenwich pull 8848 Straight pull 8975 Straight Rhodes pull Center to center 5 6 8 9 0 2 A Single/Pair Hinges & pivots How to order: Ives Architectural hardware products B9 How to order - continued: PR8190EZHD-8 US32D O 1-3/4" Single/Pair Model Center to center Finish Mounting Door thickness PR 8190EZHD 8 US32D N 1-3/4" Mounting Hardware STD Through bolt with decorative washer A Concealed mount - aluminum doors F Through bolt with countersunk hole G Concealed mount with pull plates I Concealed mount - wood doors J Back to back mount K Back to back mount (8121 only) L Concealed mount - hollow metal doors N Back to back mount O Decorative through bolt P Back to back mount - glass doors Q Decorative through bolt - glass doors X Through bolt - security screw and decorative washer Door Thickness 1-3/4" Standard 2" Optional 2-1/4" Optional G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B10 Pulls & plates A Hinges & pivots Architectural and decorative pulls B10 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots 8102HD Solid door pull - 3/4" round Available Sizes: 6", 8", 10" A Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Center to center “B” Overall length “C” 8102HD-6 2-1/4" 1-1/2" 6" 6-3/4" 8102HD-8 2-1/4" 1-1/2" 8" 8-3/4" 8102HD-0 2-1/4" 1-1/2" 10" 10-3/4" C Flush bolts & coordinators ROUND Product number B11 3/4" Pulls & plates Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details)F, G, I, J, L Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Material substrate Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 Series) Finishes US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32 US32D US32D-AM BLK 643e/716 E Finish Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stops Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze D Description 605 606 612 613 619 625 626 626-AM 628 629 630 630-AM 631 643e/716 Latches, catches & bolts BHMA Note: For other colors, consult factory. Additional information F Exterior hardware Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. G Miscellaneous hardware Ives Architectural hardware products B11 Architectural pulls and push bars Hinges & pivots 8103HD Solid door pull - 1" round A Available Sizes: 8", 10", 12" Certifications Meets ANSI A156.06 Mounting C Flush bolts & coordinators B12 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details)A, F, G, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection “A” Clearance Center to center “B” Overall length “C” 8103HD-8 2-1/2" 1-1/2" 8" 9" 1" 8103HD-0 2-1/2” 1-1/2" 10" 11" ROUND 8103HD-2 2-1/2” 1-1/2" 12" 13" Material substrate Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 Series) E Stops D Latches, catches & bolts Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629 630 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32 US32D US32D-AM BLK 643e/716 Note: For other colors, consult factory. Additional information G Miscellaneous hardware F Exterior hardware Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B12 Ives Architectural hardware products Architectural pulls and push bars A Hinges & pivots 8103EZHD S olid door pull - 1" round Large 2-1/2" clearance for the accessibility applications Available Sizes: 8", 10", 12" Certifications Meets ANSI A156.06 Complies with ADA and barrier free applications Mounting Center to center “B” Overall length “C” 1" 2-1/2” 8" 9" ROUND 8103EZHD-0 3-1/2” 2-1/2” 10" 11" 8103EZHD-2 3-1/2” 2-1/2” 12" 13" Material substrate D Latches, catches & bolts Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications C Clearance 3-1/2" Flush bolts & coordinators CLEARANCE Projection “A” 8103EZHD-8 B13 2-1/2" Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Finishes Substrate Finish Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 32-316 32D-316 US32D-AM BLK 643e/716 Additional information F Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Exterior hardware Note: For other colors, consult factory. E Description 605 606 612 613 619 625 626 626-AM 628 629-316 630-316 630-AM 631 643e/716 Stops BHMA G Miscellaneous hardware Ives Architectural hardware products B13 Architectural pulls and push bars Hinges & pivots 8105 Solid door pull - 1" flattened A Available Sizes: 8", 10", 12" Certifications Meets ANSI A156.06 Mounting B14 Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C Flush bolts & coordinators 1” FLATTED 1/2 ROUND Product number Projection “A” Clearance Center to center “B” Overall length “C” 8105-6 2" 1-1/2” 6" 6-1/2" 8105-8 2” 1-1/2” 8" 8-1/2" 8105-0 2” 1-1/2” 10" 10-1/2" Material substrate Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 Series) E Stops D Latches, catches & bolts Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629 630 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32 US32D US32D-AM BLK 643e/716 Note: For other colors, consult factory. Additional information G Miscellaneous hardware F Exterior hardware Custom lengths are available as engineering special, consult customer service. B14 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots 8145EZHD 45° Offset solid door pull Available Sizes: 8", 10", 12", 18" A Certifications Meets ANSI A156.06 Complies with ADA and Barrier Free Applications Mounting Clearance Center to center “B” Overall length “C” Offset "D" 3-1/2" 2-1/2” 8" 9" 2-1/2" 8145EZHD-0 3-1/2" 2-1/2” 10" 11" 2-1/2" 8145EZHD-2 3-1/2" 2-1/2” 12" 13" 2-1/2" 8145EZHD-18 3-1/2" 2-1/2” 18” 19” 2-1/2" Material substrate D Latches, catches & bolts Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications C Projection “A” 8145EZHD-8 Flush bolts & coordinators Product number B15 1" ROUND Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Finishes Substrate Finish Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 32-316 32D-316 US32D-AM BLK 643e/716 Additional information F Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Exterior hardware Note: For other colors, consult factory. E Description 605 606 612 613 619 625 626 626-AM 628 629-316 630-316 630-AM 631 643e/716 Stops BHMA G Miscellaneous hardware Ives Architectural hardware products B15 Architectural pulls and push bars Hinges & pivots 8190HD 90° Offset solid door pull A Available Sizes: 8", 10", 12", 18" Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B16 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C 1" ROUND Product number Projection “A” Clearance Center to center “B” Overall length “C” Overall offset "D" 8190HD-8 3-1/4" 2-1/4” 8" 9" 4 1/4" 8190HD-0 3-1/4" 2-1/4” 10" 11" 4 1/4" 8190HD-2 3-1/4" 2-1/4” 12" 13" 4 1/4" 8190HD-18 3-1/4" 2-1/4” 18” 19” 4 1/4" Material substrate Latches, catches & bolts Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 Series) E Stops D Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629 630 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32 US32D US32D-AM BLK 643e/716 Note: For other colors, consult factory. Additional information G Miscellaneous hardware F Exterior hardware Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B16 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots 8190EZHD 90° Offset solid door pull Available Sizes: 8”, 10", 12", 18" A Certifications Meets ANSI A156.06 Complies with ADA and Barrier Free Applications Mounting Center to center “B” Overall length “C” Overall offset "D" 2-1/2” 8" 9" 4 1/4" 8190EZHD-0 3-1/2" 2-1/2” 10" 11" 4 1/4" 8190EZHD-2 3-1/2" 2-1/2” 12" 13" 4 1/4" 8190EZHD-18 3-1/2" 2-1/2” 18” 19” 4 1/4" Material substrate D Latches, catches & bolts Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications C Clearance 3-1/2" Flush bolts & coordinators ROUND Projection “A” 8190EZHD-8 B17 1" Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Finishes Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629-316 630-316 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 32-316 32D-316 US32D-AM BLK 643e/716 Additional information F Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Exterior hardware Note: For other colors, consult factory. E Description Stops BHMA G Miscellaneous hardware Ives Architectural hardware products B17 A Hinges & pivots Architectural pulls and push bars 9100HD Solid push bar Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications Pulls & plates 1” Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with type NS mounting. Optional mounting hardware available (see general information section for details) A, F, I, L, N, NO, STD, O, P, PQ, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C Flush bolts & coordinators B18 ROUND Meets ANSI A156.06 Projection "A" Clearance Center to center “B” Overall length “C” 2-1/2" 1-1/2" 25-45" Add 1" to CTC length Material substrate Latches, catches & bolts Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 or 316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications Exterior hardware E Stops D Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629 629-316 630 630-316 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Bright stainless Satin stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32 32-316 US32D 32D-316 US32D-AM BLK 643e/716 Note: For other colors, consult factory. F Additional information Specify PR when ordering a set of push bars for back to back mounting For one back to back machined push bar, specify Nsgl or Psgl (glass doors) Specify STD, A, F, I L, O or Q when planning to mount push bar alone. Specify NS, NO, or PQ when using as a part of a push pull combination. Miscellaneous hardware Caution G The length of push bar should not interfere with the door jamb or cause a pinch point B18 Ives Architectural hardware products Architectural pulls and push bars Hinges & pivots A 9103EZHD S olid straight pull/push bar combo (8103EZHD Pull + 9100HD Push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications Mounting C Flush bolts & coordinators Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with type NS mounting. Optional mounting hardware available (see general information section for details) NO, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B19 ROUND Pulls & plates 1" Meets ANSI A156.06 Pull Side complies with ADA and Barrier Free Applications Product number CTC Push CTC Pull Projection Push & Pull 9103EZHD 25 to 45" 8" 2-1/2" & 3-1/2" 9103EZHD 25 to 45" 10" 2-1/2" & 3-1/2" 9103EZHD 25 to 45" 12" 2-1/2" & 3-1/2" Finishes US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 32-316 32D-316 US32D-AM BLK 643e/716 Note: For other colors, consult factory. Caution The length of push bar should not interfere with the door jamb or cause a pinch point F Finish Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Exterior hardware Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze E Description 605 606 612 613 619 625 626 626-AM 628 629-316 630-316 630-AM 631 643e/716 Stops BHMA D Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications Latches, catches & bolts Material substrate G Miscellaneous hardware Ives Architectural hardware products B19 Hinges & pivots Architectural pulls and push bars A 9145EZHD 4 5° Offset pull/push bar combo (8145HD pull + 9100HD push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications Pulls & plates Meets ANSI A156.06 Pull Side complies with ADA and Barrier Free Applications B20 Mounting 1" Latches, catches & bolts C Flush bolts & coordinators ROUND Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with type NS mounting. Optional mounting hardware available (see general information section for details) NO, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number CTC Push CTC Pull Projection Push & Pull 9145EZHD 25 to 45" 8" 2-1/2" & 3-1/2" 9145EZHD 25 to 45" 10" 2-1/2" & 3-1/2" 9145EZHD 25 to 45" 12" 2-1/2" & 3-1/2" 9145EZHD 25 to 45" 18" 2-1/2" & 3-1/2" Material substrate D Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications F Exterior hardware E Stops Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629-316 630-316 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 32-316 32D-316 US32D-AM BLK 643e/716 Note: For other colors, consult factory. Caution G Miscellaneous hardware The length of push bar should not interfere with the door jamb or cause a pinch point B20 Ives Architectural hardware products Architectural pulls and push bars A Hinges & pivots 9190HD S olid 90° Offset pull/push bar combo (8190HD pull + 9100HD push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications ROUND CTC Push Projection push and pull 9190EZHD 9190EZHD 25 to 45" 8" 2 1/2" and 3 1/4" 25 to 45" 10" 2 1/2" and 3 1/4" 9190EZHD 25 to 45" 12" 2 1/2" and 3 1/4" 9190EZHD 25 to 45" 18" 2 1/2" and 3 1/4" Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 Series) Finishes Finish Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32 US32D US32D-AM BLK 643e/716 F Exterior hardware Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze E Description 605 606 612 613 619 625 626 626-AM 628 629 630 630-AM 631 643e/716 Stops BHMA D Material substrate Latches, catches & bolts CTC Pull C Product number Flush bolts & coordinators Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes Standard with type NS mounting. Optional mounting hardware available (see general information section for details) NO, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B21 Mounting 1" Pulls & plates Meets ANSI A156.06 Note: For other colors, consult factory. Caution The length of push bar should not interfere with the door jamb or cause a pinch point G Miscellaneous hardware Ives Architectural hardware products B21 Hinges & pivots Architectural pulls and push bars A 9190EZHD S olid 90° Offset pull/push bar combo (8190EZHD pull + 9100HD push) Available in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service. Certifications B22 Pulls & plates Meets ANSI A156.06 Pull Side complies with ADA and Barrier Free Applications 1" Latches, catches & bolts C Flush bolts & coordinators ROUND Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with type NS mounting. Optional mounting hardware available (see general information section for details) NO, PQ Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number CTC Push CTC Pull Projection push & pull 9190EZHD 25 to 45" 8" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 10" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 12" 2-1/2" & 3-1/2" 9190EZHD 25 to 45" 18" 2-1/2" & 3-1/2" D Material substrate Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications F Exterior hardware E Stops Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 629-316 630-316 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 32-316 32D-316 US32D-AM BLK 643e/716 Note: For other colors, consult factory. Caution G Miscellaneous hardware The length of push bar should not interfere with the door jamb or cause a pinch point B22 Ives Architectural hardware products Decorative pulls Hinges & pivots 8111-5 Solid door pull Sizes: 5 1/4" A Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Center to center “B” Overall length “C” 8111-5 1-3/16" 1-3/16” 5-1/4" 6-1/4" Made from solid aluminum (6061-T6 Alloy), brass, or stainless steel (304 Series) Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 630 630-AM 631 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Satin stainless Satin stainless anti-microbial Matte black Brass Brass Brass Brass Stainless Steel Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32D US32D-AM BLK D BHMA Latches, catches & bolts 1” FLATTED 1/2 ROUND C Finishes Flush bolts & coordinators Material substrate B23 1" ROUND BASE Product number Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details)F, G Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Note: For other colors, consult factory. E Stops 8112-5 Solid door pull Sizes: 5-1/4" Certifications Meets ANSI A156.06 F 8 x 1" wood screws Surface mount only Exterior hardware Mounting Product number Projection “A” Clearance Center to center “B” Overall length “C” 8112-5 2-13/16" 1-7/16” 5-5/8" 7-1/2" Material substrate Made from solid brass Finishes Description Substrate Finish 626 626-AM Satin chrome Satin chrome anti-microbial Brass Brass US26D US26D-AM Note: For other colors, consult factory. 1” FLATTED 1/2 ROUND Ives Architectural hardware products G BHMA Miscellaneous hardware 1-7/8" SURFACE MOUNTED B23 Decorative pulls Hinges & pivots 8121 Solid door pull A Sizes: 5-3/4" Certifications Meets ANSI A156.06 Mounting B24 Pulls & plates 8-32 x 1" machine screw and #8 x 1" wood screw Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Supplied standard with K mounting hardware; optional mounting hardware available (see general information section for details) Mounting hardware for other door thicknesses are available as engineering special, consult customer service. B C Flush bolts & coordinators 1-1/2” HOSPITAL C A Product number Projection “A” Clearance Center to center “B” Overall length “C” 8121-5 3-1/2" 1-7/16” 5-3/4" 8-3/4" Material substrate Made from solid brass Finishes BHMA Description Substrate Finish 626 626-AM Satin chrome Satin chrome anti-microbial Brass Brass US26D US26D-AM G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts Note: For other colors, consult factory. B24 Ives Architectural hardware products Decorative pulls Hinges & pivots 8169 C Style (tubular series) offset solid door pull A 1" Diameter pull bar Available Sizes: 10", 12" Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Offset Center to center “B” Overall length “C” 8169-0 3" 2" 6-1/2" 10 11 8169-2 3" 2" 6-1/2" 12 13 Material substrate Made from brass or stainless steel (304 Series) C C Product number Flush bolts & coordinators A B25 B Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Finishes Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK D Description Latches, catches & bolts 1" ROUND BHMA Note: For other colors, consult factory. Additional information E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B25 Decorative pulls Hinges & pivots 8181 Georgian 90° offset solid door pull A 1" Round pull (Grip Area 1.1/4") Available sizes: 12", 16", 18" Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B26 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C D 2" B Product number Projection “A” Clearance Offset "D" Center to center “B” Overall length “C” 8181-2 3-1/8" 1-7/8" 4" 12" 12-3/4" 8181-16 3-1/8" 1-7/8" 4" 16" 16-3/4" 8181-18 3-1/8" 1-7/8" 4" 18" 18-3/4" Material substrate Latches, catches & bolts Made from solid aluminum, brass or stainless steel (304 Series) D Finishes BHMA Description Substrate Finish 605 613 619 625 626 628 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Clear anodized Satin stainless Matte black Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel US3 US10B US15 US26 US26D US28 US32D BLK Note: For other colors, consult factory. Stops Additional information G Miscellaneous hardware F Exterior hardware E Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B26 Ives Architectural hardware products Decorative pulls Hinges & pivots 8189 Athens offset tubular door pull A 1-1/4" Diameter pull bar with 1-1/4" Diameter mounting posts Available sizes: 19 3/16" Certifications Meets ANSI A156.06 Mounting B C A 3" 3" 1-3/8" 1-3/8" C Offset "D" Center to center “B” Overall length “C” 1-3/8" 1-1/2" 19-13/16" 29.5" C Material substrate Made from brass or stainless steel (304 Series) Finishes Description Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK Note: For other colors, consult factory. D BHMA Latches, catches & bolts US32 Finish US32 Finish B D A Clearance 2-5/8" Flush bolts & coordinators US32 Finish D US32 Finish Projection “A” 8181-19 B27 Non directional finish typ Non directional finish typ Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B27 Decorative pulls Hinges & pivots 8281 Georgian straight solid door pull A 1" Round pull (grip area 1.1/4") Available sizes: 12", 16", 18" Certifications Meets ANSI A156.06 Mounting B28 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Flush bolts & coordinators 1-7/8" B C C 1-1/4" 1" Product number Projection “A” Clearance Center to center “B” Overall length “C” 8181-2 3-1/8" 1-7/8" 12" 12-3/4" 8181-16 3-1/8" 1-7/8" 16" 16-3/4" 8181-18 3-1/8" 1-7/8" 18" 18-3/4" Material substrate Made from solid aluminum, brass or stainless steel (304 Series) D Latches, catches & bolts Finishes BHMA Description Substrate Finish 605 613 619 625 626 628 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Clear anodized Satin stainless Matte black Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel US3 US10B US15 US26 US26D US28 US32D BLK Note: For other colors, consult factory. Stops Additional information G Miscellaneous hardware F Exterior hardware E Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Qsgl (glass doors) Custom lengths are available as engineering special, consult customer service. B28 Ives Architectural hardware products Decorative pulls Hinges & pivots 8312 Plymouth offset solid door pull A 1-7/16" Max grip diameter Available Sizes: 12" Certifications Meets ANSI A156.06 Mounting 1-3/16" C Clearance 8312-2 3" 1-9/16" Offset "D" Center to center “B” Overall length “C” 1-1/2" 12" 14" Material substrate C 1-7/16" B 3/ 4" Projection “A” Made from brass or stainless steel (304 Series) Finishes Description Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK Note: For other colors, consult factory. D BHMA Latches, catches & bolts D Flush bolts & coordinators 5/ 8" Product number B29 1-7/8" Pulls & plates 3-1/8" 2" A Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B29 Decorative pulls Hinges & pivots 8320 Plymouth offset solid door pull A 1-1/4" Max grip diameter Available Sizes: 20" Certifications Meets ANSI A156.06 Mounting B30 Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Flush bolts & coordinators A 3/ 4" Product number Projection “A” Clearance Offset "D" Center to center “B” Overall length “C” 8320-20 3-7/8" 2-5/8" 2-7/8" 20" 22" C Material substrate 1-1/4" B C 1-1/4" D D Latches, catches & bolts 4-5/8" Made from brass or stainless steel (304 Series) Finishes BHMA Description Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK Note: For other colors, consult factory. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. B30 Ives Architectural hardware products Decorative pulls Hinges & pivots 8371 Addison flat tip straight solid door pull A 1" Round pull with 1-1/4" base mounting posts Available sizes: 12", 18", 24" Certifications Meets ANSI A156.06 Mounting Center to center “B” Overall length “C” 8371-2 3-7/16" 2" 12" 16" 8371-18 3-7/16" 2" 18" 22" 8371-24 3-7/16" 2" 24" 28" C Material substrate Made from solid brass A Description Substrate Finish 605 613 619 622 625 626 Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US10B US15 BLK US26 US26D D BHMA Latches, catches & bolts Finishes C 1" D Clearance Flush bolts & coordinators B Projection “A” B31 2" Product number Pulls & plates Heavy duty mounting hardware exceeds industry standards 3/8-16" mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Note: For other colors, consult factory. Additional information E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B31 Decorative pulls Hinges & pivots 8372 Camelot steeple tip straight tubular door pull A 1" Round pull with 2" base mounting posts Available sizes: 12", 18", 24" Certifications Meets ANSI A156.06 B32 Pulls & plates Mounting Flush bolts & coordinators A C 1-7/8" C B 1" D Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Product number Projection “A” Clearance Center to center “B” Overall length “C” 8372-2 2-7/8" 1-7/8" 12" 17" 8372-18 2-7/8" 1-7/8" 18" 23" 8372-24 2-7/8" 1-7/8" 24" 29" Material substrate Made from brass D Latches, catches & bolts Finishes BHMA Description Substrate Finish 605 613 619 622 625 626 Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US10B US15 BLK US26 US26D Note: For other colors, consult factory. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. B32 Ives Architectural hardware products Decorative pulls Hinges & pivots 8373 Brookshire acorn tip straight tubular door pull A 1" Round pull with 2" base mounting posts Available sizes: 12", 18", 24" Certifications Meets ANSI A156.06 Mounting Center to center “B” Overall length “C” 8372-2 3" 1-7/8" 12" 16-5/16" 8372-18 3" 1-7/8" 18" 22-5/16" 8372-24 3" 1-7/8" 24" 28-5/16" Material substrate Made from brass Description Substrate Finish 605 613 619 622 625 626 Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US10B US15 BLK US26 US26D D BHMA Latches, catches & bolts Finishes C 1" Dia. Clearance Flush bolts & coordinators C Projection “A” B33 1-7/8" B Product number Pulls & plates A Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Note: For other colors, consult factory. Additional information E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B33 Decorative pulls Hinges & pivots 8700 Greenwich arc straight solid door pull A 3/4" Round pull Available sizes: 9", 12", 18", 24" Certifications Meets ANSI A156.06 Mounting B34 Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Latches, catches & bolts 1-3/8" C Flush bolts & coordinators A C Projection “A” Clearance Center to center “B” Overall length “C” 8700-9 2-3/8" 1-5/8" 9" 12-9/16" 15-9/16" 8700-2 2-3/8" 1-5/8" 12" 8700-18 2-3/8" 1-5/8" 18" 21-9/16" 8700-24 2-3/8" 1-5/8" 24" 27-9/16" Material substrate Made from solid brass or stainless steel (304 Series) B ¾" DIA D Product number Finishes BHMA Description Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK Note: For other colors, consult factory. Additional information G Miscellaneous hardware F Exterior hardware E Stops Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. B34 Ives Architectural hardware products Decorative pulls Hinges & pivots 8800 Greenwich arc offset solid door pull A 3/4" Round pull Available sizes: 9", 12", 18", 24" Certifications Meets ANSI A156.06 Mounting Offset "D" Center to center “B” Overall length “C” 1-3/8" 1" 9" 11-3/4" 8800-2 2-1/8" 1-3/8" 1" 12" 14-3/4" 8800-18 2-1/8" 1-3/8" 1" 18" 20-3/4" 8800-24 2-1/8" 1-3/8" 1" 24" 26-3/4" Material substrate Made from solid brass or stainless steel (304 Series) Description Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK D BHMA Latches, catches & bolts Finishes C B Clearance 2-1/8" Flush bolts & coordinators C Projection “A” 8800-9 B35 3/4" DIA Product number Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Note: For other colors, consult factory. A E Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl Custom lengths are available as engineering special, consult customer service. Stops D Additional information F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B35 Decorative pulls Hinges & pivots 8848 Latitude straight solid door pull A 1" Round pull with 2" Round black mounting posts Available sizes: 12" Certifications Meets ANSI A156.06 2" C Mounting Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. C Flush bolts & coordinators B36 Pulls & plates B 2" C Clearance Center to center “B” Overall length “C” 8848-2 2-1/2" 1-1/2" 12" 17" Material substrate 2" Latches, catches & bolts Projection “A” 1-1/2" A B Product number D 1" Made from solid brass or stainless steel (304 Series) Finishes BHMA Description Substrate Finish 605 613 619 625 626 630 631 Bright brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin stainless Matte black Brass Brass Brass Brass Brass Stainless steel Stainless steel US3 US10B US15 US26 US26D US32D BLK Note: For other colors, consult factory. 1-1/2" A E Stops 2" G Miscellaneous hardware F Exterior hardware 1" B36 Ives Architectural hardware products Additional information Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Nsgl or Psgl (glass doors) Custom lengths are available as engineering special, consult customer service. Decorative pulls Hinges & pivots 8975 Rhodes straight solid door pull A 1-1/4" X 1/2" Flat pull with 3/4" round mounting posts Available sizes: 12" Certifications Meets ANSI A156.06 Mounting Projection “A” Clearance Center to center “B” Overall length “C” 8975-2 2-1/4" 1-3/4" 12" 18" C Material substrate C Made from solid aluminum, brass or stainless steel (304 Series) B Finishes Description Substrate Finish 628 Clear anodized Aluminum US28 Additional information 1-3/4" D Specify PR when ordering a set of pulls for back to back mounting For one back to back machined pull, specify Jsgl (glass doors) Custom lengths are available as engineering special, consult customer service. Latches, catches & bolts BHMA Note: For other colors, consult factory. A Flush bolts & coordinators Product number B37 1/2" Pulls & plates 1-1/4" Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Accessory package available for 2" and 2-1/4" thick doors Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, I, J, L, O, P Mounting hardware for other door thicknesses are available as engineering special, consult customer service. E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B37 How to order: PR9264F 72-56 US32D P 1/2" Single/Pair Model Length Center to center Finish PR 9264F 72 56 US32D A Hinges & pivots Long door pulls Single/Pair “Blank” Single pull machined with standard threads PR Pair of pulls - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting 12 12" 18 18" 24 24" 36 36" 72 72" Center to Center 8 8" 12 12" 18 18" 20 20" 56 56" Finish Single pull machined for back to back mounting (glass doors) Model 9264 9264F 9266 9266F Length Offset long door pull, rounded tips Offset long door pull, flat tips Straight long door pull, rounded tips Straight long door pull, flat tips 605 Buff Brass US3 606 Satin Brass US4 613 Antique Bronze US10B 619 Satin Nickel US15 629-316 Buff Stainless - 316 Substrate US32D-316 630-316 Satin Stainless - 316 Substrate US32D-316 643e/716 Aged Bronze --BLK Matte black --Mounting hardware STD Through bolt with decorative washer A Concealed mount - aluminum doors I Concealed mount - wood doors L Concealed mount - hollow metal doors N Back to back mount O Decorative through bolt P Back to back mount - glass doors Q Decorative through bolt - glass doors X Through bolt - security screw and decorative washer MB Additional mounting bracket (centered) Door thickness 1-3/4" Standard 2" Optional 2-1/4" Optional G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C B38 Pulls & plates Qsgl Flush bolts & coordinators Nsgl B38 Ives Architectural hardware products Mounting Door thickness P 1/2" Long door pulls 1-1/4" Diameter tubular bar Round tip is standard Optional flat Tip (F) is available. Specify F after model number when ordering. Available in whole 1" increments from 12" to 96" Other lengths available as engineering special, consult customer service. A Hinges & pivots 9264 Offset long door pull, rounded tip 9266 Straight long door pull, rounded tip Certifications Meets ANSI A156.06 9266 Straight long door pull Offset Overall Length 1-1/2" 1 5/8" 72" CTC 56" 9264-36-20 2-3/4" 1-1/2" 1 5/8" 36" 20" 9264-24-18 2-3/4" 1-1/2" 1 5/8" 24" 18" 9264-18-12 2-3/4" 1-1/2" 1 5/8" 18" 12" 9264-12-8 2-3/4" 1-1/2" 1 5/8" 12" 8" 9266-72-56 2-3/4" 1-1/2" — 72" 56" 9266-36-20 2-3/4" 1-1/2" — 36" 20" 9266-24-18 2-3/4" 1-1/2" — 24" 18" 9266-18-12 2-3/4" 1-1/2" — 18" 12" 9266-12-8 2-3/4" 1-1/2" — 12" 8" Material substrate D Clearance 2-3/4" Latches, catches & bolts Projection 9264-72-56 C Product number Flush bolts & coordinators Standard lengths B39 Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, I, L, N, O, P, Q, X Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Pulls & plates Mounting Made from brass or stainless steel (316 Series) 316 Series Stainless Steel standard, exceeding industry standards for corrosion resistance Recommended for external applications Finish 605 606 613 619 629-316 630-316 630-AM 631 643e/716* Bright brass Satin brass Oil rubbed bronze Satin nickel Bright stainless Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Stainless Steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10B US15 32-316 32D-316 US32D-AM BLK 643e/716 Note: For other colors, consult factory. * Max length for 643e/716 is 36". F Substrate Exterior hardware Round tip (Standard) Description E 9264 Offset bracket BHMA Stops Finishes Additional information G Note: A middle position bracket is required for pulls over 8 feet. Miscellaneous hardware Flat tip (F Option) If not specified, standard center to center length for pulls 36" or longer is 16" less than total pull length (8" from each end of the pull). Center to center length must be specified for lengths less than 36". − Ex. 72" Long pull has a 56" Center to Center If the center to center length is less than half the total pull length, consult customer service. Specify PR when ordering a set of push bars for back to back mounting For one back to back machined push bar, specify Nsgl or Psgl (glass doors) Additional mounting post required for lengths greater than 96". Mid posts are optional for other lengths. Specify mid post location when ordering. Caution Recommend the length of the ladder pull should not exceed 4" less than the door height Ives Architectural hardware products B39 Hands-free door pulls A Hinges & pivots Ives hands-free door pulls allow for hands-free operation to promote a healthy environment. Ives offers pulls in a variety of styles and designs that enable pedestrians to operate the door with an arm, elbow or wrist to avoid contacting surfaces with their hands. Durable construction with stainless steel and rust-free brass for longevity Cost effective option is budget friendly Easily retrofittable for existing openings Aesthetically pleasing designs to suite with building style Pulls & plates FP101 Hands-Free Foot Pull B40 Sanitary foot opening Use alongside current pull for hands-free needs Size Material Substrate 5” wide, 2-3/4" height, 3-1 /8" projection Rugged 1/8" thick stainless steel Mounting C Flush bolts & coordinators Through-bolts provided for secure mounting and durability AP101 Hands-Free Arm Pull Latches, catches & bolts Easy forearm opening Use alongside current pull for hands-free needs Size Material Substrate 4” wide, 5-1 /8" height, 3-7 /8" projection Rugged 1/8" thick stainless steel Mounting D Through-bolts provided for secure mounting and durability Finishes for the Arm and Foot Pull Description Substrate Finish 630 695 631 Satin Stainless Steel Dark Bronze Painted Black Painted Stainless Steel Stainless Steel Stainless Steel US32D US10BE BLK E Stops BHMA OTP300 Plastic Opening Hand Tool OT300 Steel Opening Hand Tool Exterior hardware For hands-free use with door pulls or levers Size F 2" width, 5" height Material Substrate OTP300 is a durable black plastic tool offered in packs of 10 OT300 is study 1/8" stainless steel with smooth tumbled edges G Miscellaneous hardware Finishes for the OT300 B40 Ives Architectural hardware products BHMA Description Substrate Finish 630 631 Satin Stainless Steel Black Painted Stainless Steel Stainless Steel US32D BLK Push and pull plates PR8303-8 US32D 4X16 N 1-3/4" Model PR 8303 Center to center Finish 8 US32D Plate W X H Mounting Door thickness 4 X 16 N 1-3/4" Single/Pair “Blank” Single pull machined with standard threads PR Pair of pulls and plates - One pull machined with standard threads and one pull machined for back to back mounting Single pull machined for back to back mounting Nsgl Pulls & plates Model B41 8200 Push Plate 8300 Pull plate (less pull) 8302 Pull plate (with 8102 pull) 8303 Pull plate (with 8103 pull) 8305 Pull plate (with 8105 pull) 8311 Pull plate (with 8111 pull) Pull center to center Flush bolts & coordinators 5-1/4" (8111 only) 6" (8102HD and 8105 only) 8" (8102HD, 8103HD, 8105 only) 10" (8102HD, 8103HD, 8105 only) 12" (8103HD only) US3 US4 US10 US10B US15 US26 US26D US260-AM US28 US32D US32D US32D-AM ----- D Latches, catches & bolts E Stops F Exterior hardware 605 Buff Brass 606 Satin Brass 612 Satin Bronze 613 Antique Bronze 619 Satin Nickel 625 Buff Chrome 626 Satin Chrome 626-AM Satin Chrome - Anti-Microbial 628 Satin Clear Anodized 629 Buff Stainless 630 Satin Stainless 630-AM Satin Stainless - Anti-Microbial 643e/716 Aged Bronze BLK Matte black Plate width x height 3X12 3" Wide X 12" High 3.5X15 3-1/2" Wide X 15" High 4X16 4" Wide X 16" High 6X16 6" Wide X 16" High 8X16 8" Wide X 16" High Mounting hardware STD Through bolt with decorative washer A Concealed mount - aluminum doors F Through bolt with countersunk hole G Concealed mount with pull plates I Concealed mount - wood doors J Back to back mount (8102 only) L Concealed mount - hollow metal doors N Back to back mount Door thickness 1-3/4" Standard 2" Optional 2-1/4" Optional C 5 6 8 0 2 Finish A Single/Pair Hinges & pivots How to order: G Miscellaneous hardware Ives Architectural hardware products B41 Push and pull plates A Hinges & pivots 8200 Push plate 8300 Pull plate, prep for pull (less pull) Plates are available in .050 thick brass, stainless steel or aluminum Certifications Meets ANSI A156.6 for J301 Materials Mounting Widths and heights D Latches, catches & bolts 3" X 12" 3-1/2" X 15" 4" X 16" 6" X 16" 8" X 16" Optional pull center to center spacing For 8300 pull plates, plates are prepped with 2 3/8" holes for pull machining For holes prepped for G mounting hardware, consult customer service. − 5-1/4” − 6” − 8” − 10” − 12” C Flush bolts & coordinators B42 Pulls & plates Standard mounting package − #6X5/8 oval head screws Optional TEK/TORX package − #6X5/8 Self-drilling, Self-tapping screws − #6X5/8 Torx screws For plates up to 4" 2” 2” CFC Material substrate CFT Made from aluminum , brass, or stainless steel (300 Series) For plates greater than 4" (RH shown) 2” 2” 2” Finishes 2” CFT E Stops CFC BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 630 630-AM 631 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Satin stainless Satin stainless anti-microbial Matte black Brass Brass Brass Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32D US32D-AM BLK Note: For other colors, consult factory. Exterior hardware Additional information F Specify PR when ordering a set of plates for back to back mounting Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. Plates cut for cylinder or thumbturns Miscellaneous hardware Plates are available with cutout for cylinder or thumbturn; standard cutout is 2” from top and centered on plates up to 4” wide. For plates wider than 4” cutout is located 2” from outer edge, specify LH or RH. When pull location interferes with standard cutout location a detail drawing should be furnished with the order. G Standard cutout is 1-1/4” for cylinder and 3/8” for thumbturn. Specify CFC for cutout for cylinder or CFT for cutout for thumbturn. B42 Ives Architectural hardware products Push and pull plates A Certifications Meets ANSI A156.06 Mounting C 3-1/2" X 15" 4" X 16" 6" X 16 Pull center to center D Material substrate Latches, catches & bolts 6" 8" 10" Made from aluminum , brass, or stainless steel (300 Series) Finishes Finish Brass Brass Brass Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32D US32D-AM BLK 643e/716 F Exterior hardware Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Satin stainless Satin stainless anti-microbial Matte black Aged bronze E Description 605 606 612 613 619 625 626 626-AM 628 630 630-AM 631 643e/716 Stops BHMA Note: For other colors, consult factory. Additional information Flush bolts & coordinators ROUND B43 Widths and heights Pulls & plates Heavy duty mounting hardware exceeds industry standards 5/16-18 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, G, I, J, L Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate − #6 X 5/8 oval head screws Optional TEK/TORX package − #6 X 5/8 Self-drilling, Self-tapping screws and − #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 6", 8", or 10" center to center 3/4" Hinges & pivots 8302 Pull plate G Miscellaneous hardware Specify PR when ordering a set of pulls for back to back mounting Plate to pull clearance is 1 1/2" For one back to back machined pull, specify Jsgl Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. Ives Architectural hardware products B43 Push and pull plates Hinges & pivots 8303 Pull plate A Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B44 Pulls & plates 1" ROUND Heavy duty mounting hardware exceeds industry standards 3/8-16 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) A, F, G, I, L, N Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate − #6 X 5/8 oval head screws Optional TEK/TORX package − #6 X 5/8 Self-drilling, Self-tapping screws and − #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 8" or 10" center to center C Widths and heights 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center Latches, catches & bolts 8" 10" Material substrate D Made from aluminum , brass, or stainless steel (300 Series) Exterior hardware E Stops Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 630 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32D US32D-AM BLK 643e/716 Note: For other colors, consult factory. F Additional information G Miscellaneous hardware B44 Ives Architectural hardware products Specify PR when ordering a set of pulls for back to back mounting Plate to pull clearance is 1 1/2" For one back to back machined pull, specify Nsgl Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. Push and pull plates A Certifications Meets ANSI A156.06 Mounting B45 C Flush bolts & coordinators Widths and heights Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate − #6 X 5/8 oval head screws Optional TEK/TORX package − #6 X 5/8 Self-drilling, Self-tapping screws and − #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 6", 8", or 10" center to center 1” FLATTED 1/2 ROUND Hinges & pivots 8305 Pull plate 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center D Material substrate Latches, catches & bolts 6" 8" 10" Made from aluminum , brass, or stainless steel (300 Series) Finishes Finish Brass Brass Brass Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32D US32D-AM BLK 643e/716 Note: For other colors, consult factory. F Exterior hardware Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Satin stainless Satin stainless anti-microbial Matte black Aged bronze E Description 605 606 612 613 619 625 626 626-AM 628 630 630-AM 631 643e/716 Stops BHMA Additional information Plate to pull clearance is 1 1/2" Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. G Miscellaneous hardware Ives Architectural hardware products B45 Push and pull plates Hinges & pivots 8311 Pull plate A Certifications Meets ANSI A156.06 Mounting Flush bolts & coordinators B46 Pulls & plates 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes standard with through bolt screws and decorative washers. Optional mounting hardware available (see general information section for details) F, G Mounting hardware for other door thicknesses are available as engineering special, consult customer service. Standard mounting package for plate − #6 X 5/8 oval head screws Optional TEK/TORX package − #6 X 5/8 Self-drilling, Self-tapping screws and − #6 X 5/8 Torx screws Plate prepped with 2 pull mounting holes spaced at 5-1/4" center to center C Widths and heights 1” ROUND BASE 3-1/2" X 15" 4" X 16" 6" X 16" Pull center to center Latches, catches & bolts 5-1/4" Material substrate D Made from aluminum , brass, or stainless steel (300 Series) Finishes E Stops 1” FLATTED 1/2 ROUND BHMA Description Substrate Finish 605 606 612 613 619 625 626 626-AM 628 630 630-AM 631 643e/716 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Satin chrome anti-microbial Clear anodized Satin stainless Satin stainless anti-microbial Matte black Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Aluminum Stainless steel Stainless steel Stainless steel Stainless steel US3 US4 US10 US10B US15 US26 US26D US26D-AM US28 US32D US32D-AM BLK 643e/716 Note: For other colors, consult factory. Exterior hardware Additional information G Miscellaneous hardware F Specify PR when ordering a set of pulls for back to back mounting Custom widths, heights, and special cut-outs are available as engineering special, consult customer service. B46 Ives Architectural hardware products Protection plates A Hinges & pivots Types of protection plates Mop plates Protect the bottom of the pull side of door subject to cleaning and mopping procedures. Size Ranges: 4” to 6” high, 22” to 48” wide B47 Pulls & plates Kick plates C Stretcher plates Flush bolts & coordinators Protect the bottom of the push side of doors subject to scuffing from foot traffic. Recommended for all doors subject to normal use (especially doors using a closer). Size Ranges: 8” to 24” high, 22” to 48” wide Protect lower half of doors from abuse by hard carts, trucks and rough usage. Usually applied to push side of single doors and both sides of double acting doors. Size Ranges: 26” to 48” high, 22” to 48” wide D Armor plates Latches, catches & bolts Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment. Usually applied to push side of doors. Specify “B4E” Option for beveled edges. Size Ranges: 6” to 8” high, 22” to 48” wide E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B47 A Hinges & pivots Protection plates 8400 Commercial protection plates 8402 UL Commercial protection plates Door protection plates are available in .050" thick brass, stainless steel or aluminum; and 1/8" thick high impact polyethylene in clear or black. All plates, metal and plastic, come standard with four beveled edges and countersunk mounting holes (B-CS). Protection plates must be ordered in 1/2" increments. Available in other sizes, consult customer service For 8402 UL Plates, UL mark appears in upper left corner. Not available on plastic protection plates. Special cutouts are not allowed on UL kick plates. Meets ANSI A156.6 for J301 UL protection plates certified to UL10C Mounting Standard mounting package, 16 per pack − #6 X 5/8 oval head screws Optional TEK/TORX package, specify TK-TX − #6 X 5/8 Self-drilling, Self-tapping screws − #6 X 5/8 Torx screws Finishes Aluminum 5005 Series, Brass C26800 Series, Stainless Steel 300 Series, Plastic E Stops D Latches, catches & bolts C Flush bolts & coordinators B48 Pulls & plates Certifications BHMA Description Substrate Finish Max sizes 605 Bright Brass Brass US3 24"X48" 606 Satin Brass Brass US4 24"X48" 612 Satin Bronze Brass US10 24"X48" 36"X48" 613 Oil Rubbed Bronze Brass US10B 619 Satin Nickel Stainless US15 24"X48" 625 Bright Chrome Stainless US26 36"X48" 626 Satin Chrome Stainless US26D 48"X48" 628 Satin Aluminium Aluminium US28 48"X48" 629 Bright Stainless Steel Stainless Steel US32 48"X48" 630 Satin Stainless Steel Stainless Steel US32D 48"X48" 654 Satin Stainless Steel Stainless Steel US32D 48"X48" BLK Matte Black Stainless Steel BLK 24"X48" P-BLK Black Plastic P-BLK 48"X48" CLR Clear Plastic CLR 48"X48" Number of screw packs required by plate size (specify TEK Screws or TORK screws) 22”-25” 26”-33” 34”-41” 42”-48” 4”-8” 1 1 1 1 9”-16” 1 1 1 1 17”-24” 1 1 1 2 25”-32” 1 1 2 2 33”-40” 1 2 2 2 41”-48” 2 2 2 2 Custom finishes are available as engineering special, consult customer service. Specify B-NH for no mounting holes. (Not available on 8402. Available only with US32D, US32, US3, US4, US28, CLR, P-BLK only) Specify B-NHA for no mounting holes with adhesive. Specify ERS prepped with extra row of screws. Special Cut-outs are available as engineering special, consult customer service. Available accessory Gasket tape kit tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8" x 34" kickplate. Order 8401 gasket tape. G Miscellaneous hardware F Exterior hardware Available options B48 Ives Architectural hardware products Edge guards A Ives edge guards, designed to protect the edge of the door, can be used in both single or double acting door applications. They feature 21 types including beveled, non-beveled, bull nose, overlap and astragal. There are 10 standard cutout options, available in 0.050 material in stainless steel, brass or aluminum and can be used on 1 3⁄4", 2" or 2 1⁄4" thick doors. Available with stamped UL label for fire rated applications. Edge guard lengths have a range from 12" - 120" in 1⁄8" increments. Hinges & pivots General information Use the Ives edge guard ordering guide to select the best edge guard model, UL, length, finish, and cutout option to fit your project needs. B49 Pulls & plates Visit how to order guide: https://us.allegion.com/content/dam/allegion-us-2/web-documents-2/UserGuide/Ives_Edge_Guard_Ordering_User_ Guide_113392.pdf C Flush bolts & coordinators D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B49 A Hinges & pivots Edge guards Handing, door standards and options Handing Consider the hand of door and frame: left hand, right hand, left hand reverse, right hand reverse. Inside D Latches, catches & bolts C Flush bolts & coordinators B50 Pulls & plates LH Left hand RH Right hand Outside Inside LHR Left hand reverse Outside RHR Right hand reverse Active or Inactive If you are installing astragal type edge guards for double door applications, also consider if the door is: § § Active: the most often used door, featuring locking hardware. Inactive: door that stays closed and is opened on occasion to create a larger entryway. Door thickness Ives edge guards can be used on standard 1 3⁄4" doors and are also available for 2" and 2 1⁄4" doors. Use the guide below to evaluate door thickness. Edge mount standard Edge guards are offered with standard mounting hole placement, as shown in the diagram. E Stops 0.75 [19.1] 0.71 [19.1] G Miscellaneous hardware F Exterior hardware Door thickness B50 Ives Architectural hardware products Edge guards 7300 7301 7302 7302B Hinges & pivots Mortise type 7303 A 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] R2.500 [R63.5] 90° 0.875 [22.2] 0.875 [22.2] 0.875 [22.2] 93° 0.875 [22.2] 0.875 [22.2] 7305 7306 7307 7306B C 7304 90° 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] R2.500 [R63.5] 90° 93° 1.250 [31.8] 1.250 [31.8] D 1.250 [31.8] 1.250 [31.8] 1.250 [31.8] Latches, catches & bolts 93° 90° Flush bolts & coordinators Non-mortise type B51 93° Pulls & plates 90° Overlapping type 7310 7311 7310B E 7309 Stops 7308 90° 1.750 [44.5] 1.750 [44.5] 1.750 [44.5] R2.500 [R63.5] 1.750 [44.5] 1.250 [31.8] 93° 1.250 [31.8] 90° 1.250 [31.8] F 90° 93° 1.250 [31.8] Exterior hardware 1.750 [44.5] 1.250 [31.8] G Miscellaneous hardware Ives Architectural hardware products B51 Semi-overlap type 7310S 7310SB A Hinges & pivots Edge guards 1.750 [44.5] 90° 93° 1.250 [31.8] 1.250 [31.8] Astragal type* 7302-A 7302B-A (mortised) 7306-A (mortised) 1.750 [44.5] 0.875 G Miscellaneous hardware F Exterior hardware E Stops * Available in 629 and 630 finish only. B52 Ives Architectural hardware products 1.500 0.875 1.750 [44.5] 93° 0.875 (non-mortised) 1.500 0.875 90° 7306B-A (non-mortised) 1.500 1.500 D Latches, catches & bolts C Flush bolts & coordinators B52 Pulls & plates 1.750 [44.5] 1.750 [44.5] 90° 0.875 1.750 [44.5] 93° 0.875 Edge guards A A total of 10 standard cutout options are available. No. 1 1 No. 2 1 No. 3 No. 4 No. 5 No. 6 Cylinder strike cutout ASA strike cutout Automatic and constant latching flush bolt cutout Constant latch flush bolt-wood doors 1 x 8 1⁄2" Mortise lock cutout Latch bolt cutout 1 1⁄8" 1" 1" 1 ¼" 1 1⁄8" 1 ¼" 4 7⁄8" 3 3⁄8" 6 ¾" Flush bolts & coordinators 5⁄8" B53 2 ¾" Pulls & plates 2 ¼" 1 ½" Hinges & pivots Standard cutouts 8 ½" C 8" D Latches, catches & bolts No. 7 No. 8 No. 9 2 No. 10 2 Hinge cutout Hinge cutout Auxiliary fire latch inactive cutout Auxiliary fire latch active cutout E Measure bottom of edge guard to center line (CL) of cutout Stops 1" 1" Edge guard cutout diagram 1" 1¾" 1" 4 ½" F Exterior hardware 5" Length A C G Miscellaneous hardware B A. Cutout option A B. Cutout option B C. Cutout option C 1. Provided center as standard. If offset pull or offset push is required call customer care. 2. Cutouts are measured 6" bottom to center line. Ives Architectural hardware products B53 Vandal resistant trim A Hinges & pivots VR810-DT with black grip VR814-DT without black grip Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Falcon XX, 18 or 25 Series exit device Non-handed Pull operation only Size Mounting B54 Pulls & plates 11 Gauge (0.120" thick) VR814 Flush bolts & coordinators VR810 For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size. Can be mounted directly to Falcon XX, 18 and 25 exit devices Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Product number Width Height Through bolt pattern (4 holes) Clearance grip to door Projection VR810DT 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" C Finishes G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. Custom finishes are available as engineering special, consult customer service. B54 Ives Architectural hardware products Vandal resistant trim A with black grip with black grip without black grip without black grip B55 VR810 Pulls & plates Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Falcon XX-V Through bolts direct to the exit device Night latch operation (cylinder not furnished) 1-5/8" cylinder hole cut-out on door, located 1-13/16 above horizontal center line and centered between mounting studs on vertical center line Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Supplied with protective cylinder collar. Collar spins to reduce damage from pipe wrench or other tool VR814 Hinges & pivots VR810-NL LHR VR810-NL RHR VR814-NL LHR VR814-NL RHR Size Mounting For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Can be mounted directly to Falcon XX-V5 exit devices Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Width Height Through bolt pattern (4 holes) Clearance grip to door Projection VR810NL 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" Finishes D Available in Stainless steel US32D 304 Series Stainless steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service Latches, catches & bolts Product number C Flush bolts & coordinators 11 Gauge(0.120" thick) E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B55 Vandal resistant trim Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Falcon 25-R or 25-V Series exit devices Through bolts direct to the exit device Night latch operation (cylinder not furnished) Non-handed, horizontal keyway 1-5/8" cylinder hole cut-out, on door, located at the horizontal center line 3/16" off of vertical centerline between mounting studs towards the strike edge of the door Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Supplied with protective cylinder collar. Collar spins to reduce damage from pipe wrench or other tool B56 Pulls & plates A Hinges & pivots VR810-NL-V with black grip VR814-NL-V without black grip VR810 VR814 Size Flush bolts & coordinators Mounting Latches, catches & bolts 11 Gauge(0.120" thick) Finishes C G Miscellaneous hardware F Exterior hardware E Stops D B56 Ives Architectural hardware products For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Can be mounted directly to Falcon 24-R or 25-V exit devices Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Product number Width Height Through bolt pattern (4 holes) Clearance grip to door Projection VR810NL-V 5-1/4" 11" 1-3/4" wide x 7-3/4" high 1-1/2" 1-7/8" Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service Vandal resistant trim C Flush bolts & coordinators Size B57 Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim Built-in lock protector prevents tampering Handed design allows trim to be positioned to coordinate with the centerline of inside hardware 1-1/2" cylinder hole cut-out on door, located 2-7/32 above horizontal center line and 1/4" offset from vertical center line towards the hinge side of the door Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Supplied with protective cylinder collar. Collar spins to reduce damage from pipe wrench or other tool Additional cut-outs and locations are available as engineering special, consult customer service Pulls & plates VR900 A VR904 with black grip with black grip without black grip without black grip Hinges & pivots VR900 RHR VR900 LHR VR904 RHR VR904 LHR 11 Gauge(0.120" thick) Mounting Height Through bolt pattern (4 holes) Clearance grip to door Projection 7-1/4" 11" 2" wide x 10" high 1-1/2" 1-7/8" Finishes E Stops Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. Custom finishes are available as engineering special, consult customer service. D Width Latches, catches & bolts For door thickness 1-3/4-2-1/4". 1/4-20 X 1-1/4" and 1/4-20 X 1-3/4" mounting screws with countersunk washers Can be mounted directly to Schlage L9000 Series Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B57 Vandal resistant trim B58 Pulls & plates A Hinges & pivots VR900LLP RH VR900LLP LH VR904LLP RH VR904LLP LH VR904 Flush bolts & coordinators VR900 with black grip with black grip without black grip without black grip Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with most mortise locks on inswinging doors including Schlage L9000 Series with interior L or N escutcheon, and rose trim Handed design allows trim to be positioned to coordinate with the centerline of inside hardware 1-1/2" cylinder hole cut-out on door, located 2-7/32 above Horizontal center line Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Supplied with protective cylinder collar. Collar spins to reduce damage from pipe wrench or other tool Additional cut-outs and locations are available as engineering special, consult customer service LLP= Less Lock Protector Size C 11 Gauge(0.120" thick) Mounting D Latches, catches & bolts For door thickness 1-3/4-2-1/4". 1/4-20 X 1-1/4" and 1/4-20 X 1-3/4" mounting screws with countersunk washers Can be mounted directly to Schlage L9000 Series Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Width Height Through bolt pattern (4 holes) Clearance grip to door Projection 5-1/4" 11" 1-3/4" wide x 10" high 1-1/2" 1-7/8" Finishes G Miscellaneous hardware F Exterior hardware E Stops Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service B58 Ives Architectural hardware products Vandal resistant trim Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Von Duprin 98/99 Series rim and vertical rod exit device Pull operation only Non-handed A Hinges & pivots VR910-DT with black grip VR914-DT without black grip Size 11 Gauge (0.120" thick) VR910 For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Can be mounted directly to Von Duprin 98/99 device Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Height Through bolt pattern (4 holes) Clearance grip to door Projection 5-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service C Finishes Flush bolts & coordinators Width B59 VR914 Pulls & plates Mounting D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B59 Vandal resistant trim Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Von Duprin 98/99 Series rim and vertical rod exit device 1-5/8" cylinder hole cut-out on door, centered on horizontal center line and 1/4" offset from vertical center line towards the lock side of the door Designed for use with 1-1/4" cylinders. Other cylinders may require additional blocking rings, not supplied Supplied with protective cylinder collar. Collar spins to reduce damage from pipe wrench or other tool Additional cut-outs and locations are available as engineering special, consult customer service B60 Pulls & plates A Hinges & pivots VR910-NL with black grip VR914-NL without black grip VR910 VR914 Size 11 Gauge(0.120" thick) Flush bolts & coordinators Mounting C For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Can be mounted directly to Von Duprin 98/99 device Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Width Height Through bolt pattern (4 holes) Clearance grip to door Projection 5-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" Latches, catches & bolts Finishes G Miscellaneous hardware F Exterior hardware E Stops D Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service B60 Ives Architectural hardware products Vandal resistant trim Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Von Duprin 9875/9975 mortise lock exit device Built-in lock protector prevents tampering Non-handed A Hinges & pivots VR910M-DT with black grip VR914M-DT without black grip Size 11 Gauge (0.120" thick) VR910M For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Can be mounted directly to Von Duprin 9875/9975 device Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Height Through bolt pattern (4 holes) Clearance grip to door Projection 7-1/4" 11" 1-3/8" wide x 7" high 1-1/2" 1-7/8" Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip Custom finishes are available as engineering special, consult customer service C Finishes Flush bolts & coordinators Width B61 VR914M Pulls & plates Mounting D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B61 Vandal resistant trim with black grip with black grip without black grip without black grip Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open Ligature resistant design For use with Von Duprin 9875/9975 mortise lock exit device Night latch operation (cylinder not furnished) Built-in lock protector prevents tampering on certain models Through bolts direct to the exit device Non-handed, horizontal keyway 1-5/8" cylinder hole cut-out on door, centered on horizontal center line and 1/4" offset from vertical center line towards the lock side of the door Designed for use with 1-1/4" cylinders (other cylinders may require additional blocking rings, not supplied) Supplied with protective cylinder collar. Collar spins to reduce damage from pipe wrench or other tool Additional cut-outs and locations are available as engineering special, consult customer service B62 Pulls & plates A Hinges & pivots VR910M-NL RHR VR910M-NL LHR VR914M-NL RHR VR914M-NL LHR VR914M Flush bolts & coordinators VR910M C Size 11 Gauge(0.120" thick) Mounting D Latches, catches & bolts For door thickness 1-3/4-2-1/4". 10-24 X 1" and 10-24 X 1-1/2" mounting screw size Can be mounted directly to Von Duprin 9875/9975 device Standard mounting - Welded studs fasten with pan head screws on opposite side of door Optional through bolt mounting - bolt through face of trim into device for added security Width Height Through bolt pattern (4 holes) Clearance grip to door Projection 7-1/4" 11" 1-3/4" wide x 7" high 1-1/2" 1-7/8" Finishes G Miscellaneous hardware F Exterior hardware E Stops Available in Stainless Steel US32D 304 Series Stainless Steel standard, exceeding industry standards for corrosion resistance. Recommended for external applications Models are available with or without attractive black plastisol edge grip. Custom finishes are available as engineering special, consult customer service. B62 Ives Architectural hardware products Flush pulls Certifications A Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Extra deep recess and reverse tapered grip provide for ease of pulling and gripping. Packaged with fasteners for wood applications Hinges & pivots 22 Flush pull - rectangle Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Made from wrought brass. Finish Brass B3 609 Satin brass Brass B5 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions 1-5/16" High x 3-1/8" Wide x 7/16" Deep C 0.22" Substrate Bright brass Flush bolts & coordinators 2.375" Max. Description 605 B63 1-3/16" 2-7/16" BHMA Pulls & plates Finishes Latches, catches & bolts 0.44" D 0.875" 0.656" Ref. Ref. 0.72" 0.97" 0.15" R Max. 218 Flush pull - small circle Ideal for use on sliding doors. Easy installation. Packaged 4 per bag E Stops Certifications Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Made from wrought brass. Finishes 0.775" 0.0156 R" 0.770" Finish Brass B3 609 Satin brass Brass B5 612 Satin bronze Brass B10 B10B 613 Oil rubbed bronze Brass 619 Satin nickel Brass B15 622 Matte black Brass B-BLK Bright chrome Brass B26 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions Inside cup diameter: 3/4" Overall diameter: 1" Depth: 3/8" Ives Architectural hardware products G 625 626 Miscellaneous hardware 0.340" 0.278" Substrate Bright brass F 0.062" Description 605 Exterior hardware 1" BHMA B63 Flush pulls Hinges & pivots 221 Flush pull - large circle A Ideal for use on sliding doors. Built-in prong design eliminates the need for screws or brads and facilitates installation. Packed with two escutcheon pins for added holding power. Certifications Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Pulls & plates Made from wrought brass. Flush bolts & coordinators B64 Finishes C 2-7/16" 2-7/16" 13/32" 2-1/8" BHMA Description Substrate Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Latches, catches & bolts Dimensions D Inside cup diameter: 2-1/8" Overall diameter: 2-7/16" Depth: 7/16" 222 Flush pull - rectangle Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Reverse tapered grip provide for ease of pulling. Certifications E Stops Meets ANSI/BHMA 156.9 B12201 and A156.14 D1781 Material substrate Made from cast brass. Exterior hardware Finishes F 1-5/16" 3-1/8" Miscellaneous hardware Pull body G Back plate 2-15/16" BHMA Description Substrate Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions 3-1/8" high x 1-5/16" wide x 15/32" deep 9/64" B64 3/8" 1" Ives Architectural hardware products Flush pulls Certifications Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 A Low profile makes this pull ideal for louvered, bi-folding or wardrobe doors. Packaged with fasteners for wood applications Hinges & pivots 223 Flush pull - oval Material Substrate Made from wrought brass. Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions 3-9/16" high x 1-5/16" wide x 14/32" deep Latches, catches & bolts 1-5/16" 7/8" C 13/32" Substrate Flush bolts & coordinators 3-9/16" Description B65 1-5/16 " BHMA Pulls & plates Finishes 3/64 R" D 227 Flush pull - deep well Contoured for ease of pulling. Extra deep well. Packaged with fasteners for wood applications Certifications E Stops Meets ANSI/BHMA 156.9 B22201 and A156.14 D2781 Material substrate Made from wrought brass. Finishes 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B Satin nickel Brass B15 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 1/4" 3-5/8" high x 1-3/4" wide x 9/16" deep G 619 622 Dimensions 1-3/4" 1/4" Finish Miscellaneous hardware 17/32" Substrate F 3-5/8" Description Exterior hardware 1-3/4" BHMA 17/32" 1-7/16" Ives Architectural hardware products B65 Decorative flush pulls Hinges & pivots 919 Decorative flush pull - oval A Contoured for ease of pulling. Packaged with fasteners for wood applications. Surface #6 X 3/4" OH PH Certifications Meets ANSI/BHMA 156.9 and A156.14 Material substrate Made from brass. B66 Pulls & plates Finishes 1-19/32” 15/32” 1-3/32” BHMA Description Substrate Finish 626 Satin chrome Brass 626 Dimensions 3-3/4” 4-1/4” Latches, catches & bolts C Flush bolts & coordinators 4-23/32” 4-23/32" high x 1-19/22" wide x 15/32" deep D 950 Decorative flush pull - rectangle Features a finger pocket for ease of pulling. Packaged with fasteners for wood applications. Concealed #6 X 3/4" OH PH Certifications Meets ANSI/BHMA A156.9 and A156.14 Material substrate E Stops Made from brass. Finishes F Exterior hardware BHMA Description Substrate Finish 605 Bright brass Brass 605 613 Oil rubbed bronze Brass 613 619 Satin nickel Brass 619 625 Bright chrome Brass 625 626 Satin chrome Brass 626 Dimensions G Miscellaneous hardware 3-3/4" high x 2-7/8" wide x 11/16" deep B66 Ives Architectural hardware products Decorative flush pulls Certifications Meets ANSI/BHMA 156.9 and A156.14 A Features a finger pocket for ease of pulling. Packaged with fasteners for wood applications. Exposed #6 X 3/4" FH PH Hinges & pivots 955 Decorative flush pull - square, deep well Material substrate Made from brass. Description Substrate Finish 613 Oil rubbed bronze Brass 613 626 Satin chrome Brass 626 B67 BHMA Pulls & plates Finishes Dimensions 4-5/8" high x 3-29/32" wide x 1-3/16" deep C Flush bolts & coordinators D Latches, catches & bolts 960 Decorative flush pull - rectangle, narrow Features a finger pocket for ease of pulling. Packaged with fasteners for wood applications. Concealed #6 X 3/4" OH PH Certifications Meets ANSI/BHMA A156.9 and A156.14 Material substrate Made from brass. E Stops Finishes BHMA Description Substrate Finish 605 Bright brass Brass 605 Oil rubbed bronze Brass 613 Satin nickel Brass 619 625 Bright chrome Brass 625 626 Satin chrome Brass 626 F Exterior hardware 613 619 Dimensions 3-1/16" high x 1-7/8" wide x 9/16" deep G Miscellaneous hardware Ives Architectural hardware products B67 Decorative flush pulls Hinges & pivots 962 Decorative flush pull - rectangle A Features a finger pocket for ease of pulling. Black painted finger pocket Packaged with fasteners for wood applications. Concealed #8 X 3/4" OH PH Certifications Meets ANSI/BHMA A156.9 and A156.14 Material substrate Pulls & plates Made from brass. B68 Finishes 2 7/16" 13/16" A 1 3/8" 1/4" B 1/8" 9/32" 3 3/8" 3 15/16" 3 11/16" BHMA Description Substrate Finish 613 Oil rubbed bronze Brass 613 626 Satin chrome Brass 626 Dimensions Flush bolts & coordinators 3-15/16" high x 2-7/16" wide x 19/32" deep 9/32" 1/8" G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C A B68 Ives Architectural hardware products Sliding door pulls Certifications A 3/4" width allows installation on narrow as well as standard doors. Spring automatically returns lever flush with plate. Packaged with fasteners for wood applications Hinges & pivots 230 Sliding door edge pull Meets ANSI/BHMA 156.14 D2801 Material substrate Made from solid brass. Description Substrate Finish 605 Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 Satin bronze Brass B10 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 Matte black Brass B-BLK Bright chrome Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Latches, catches & bolts Dimensions C 622 625 Flush bolts & coordinators 612 613 B69 BHMA Pulls & plates Finishes 3-7/8" high x 3/4" wide D 42 Pocket sliding door bolt Material substrate E Exclusive Ives design permits emergency release of bolt from outside the door Spring activated design allows feather-touch action Mounts to face of door Brass grommet supplied to cap release hole, protecting the door’s finish Packaged with fasteners for wood applications Stops Made from wrought brass. Finishes Substrate Finish Bright brass Brass B3 606 Satin brass Brass B4 609 Blackened Brass Brass B5 612 Satin bronze Brass B10 613 Oil rubbed bronze Brass B10B 619 Satin nickel Brass B15 Brass B-BLK Brass B26 626 Satin chrome Brass B26D — Aged bronze Brass B-643e/716 Dimensions Overall size plate: 3-1/16" high x 1-5/32" wide Strike: 1" high x 3/4" wide Depth of mortise: 5/8" Ives Architectural hardware products G Matte black Bright chrome Miscellaneous hardware 622 625 F Description 605 Exterior hardware BHMA B69 Sliding door pulls Hinges & pivots 990 Sliding door pull A Fits doors 1-3/8" to 1-1/2". Decorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Packaged with fasteners for wood applications Material substrate Body and strike made from brass or aluminum. Finishes Latches, catches & bolts C Flush bolts & coordinators B70 Pulls & plates BHMA Description Substrate 666 Bright brass Aluminum A3 --- Blackened brass Aluminum A5 669 Bright nickel Aluminum A14 670 Satin Nickel Aluminum A15 702 Satin chrome Aluminum A26D A-643e/716 --- Aged Bronze Aluminum 605 Bright brass Brass B3 613 Oil rubbed bronze Brass B613 619 Satin Nickel Brass B619 622 Matte black Brass B-BLK 625 Bright chrome Brass B26 626 Satin chrome Brass B26D --- Aged Bronze Brass B-643e/716 Dimensions G Miscellaneous hardware F Exterior hardware E Stops D 1-3/4" D x 2-1/4" H B70 Ives Architectural hardware products Finish Sliding door pulls Fits doors 1-3/8" to 1-1/2". Decorative coined edges. Pre-assembled for doors opening left to right. Plates are reversible. Packaged with fasteners for wood applications A Hinges & pivots 991 Sliding door pull - privacy Material substrate Body and strike made from brass or aluminum. Finishes Finish 666 Bright brass Aluminum A3 --- Blackened brass Aluminum A5 669 Bright nickel Aluminum A14 670 Satin Nickel Aluminum A15 702 Satin chrome Aluminum A26D A-643e/716 Aged Bronze Aluminum Bright brass Brass B3 613 Oil rubbed bronze Brass B613 619 Satin Nickel Brass B619 622 Matte black Brass B-BLK Bright chrome Brass B26 Satin chrome Brass B26D --- Aged Bronze Brass B-643e/716 Dimensions D 1-3/4" D x 2-1/4" H Latches, catches & bolts 625 626 C --605 Flush bolts & coordinators Substrate B71 Description Pulls & plates BHMA Screen door pull E Stops 25 Screen door pull Also used as a window lift, drawer or utility pull Packed with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L12231 Exterior hardware Material Substrate Cast aluminum F Dimensions Length 4-7/8" Projection 1-5/32" Mounting holes 4-1/8" center to center Description Substrate Finish 666 673 ----- Bright brass Aluminum clear coat Matte black White Aluminum Aluminum Aluminum Aluminum A3 A92 A-BLK A-W For other colors, consult factory. Ives Architectural hardware products G BHMA Miscellaneous hardware Finishes B71 G Miscellaneous hardware F Exterior hardware E Stops D Latches, catches & bolts C Flush bolts & coordinators B72 Pulls & plates A Hinges & pivots Notes B72 Ives Architectural hardware products Flush bolts and coordinators FB31P Top and bottom bolts (pair)....................................................................................... C2 FB31T Top bolt only................................................................................................................... C2 FB31B Bottom bolt only............................................................................................................ C2 FB32 Top bolt with auxiliary fire latch................................................................................... C3 FB33 Top bolt with auxiliary fire latch and retrofit plate................................................. C3 Constant latching flush bolts – Metal doors FB61P Top and bottom bolts (pair).......................................................................................C8 FB61T Top bolt only...................................................................................................................C8 FB62 Top bolt with auxiliary fire latch..................................................................................C9 COR Bar coodinators................................................................................................................ C19 Coordinators – Filler bars FL Filler bars.............................................................................................................................. C20 Coordinators – Mounting brackets MB1 and MB2 Mounting brackets...........................................................................................C21 MB1F, MB2F and MB3F Fire rated mounting brackets....................................................C22 MB1V, MB2V and MB3V...........................................................................................................C22 Coordinators – Gravity coordinators COR7G and COR9G Gravity coordinators.............................................................................C23 Coordinators - Carry bar CB1 Carry Bar..............................................................................................................................C24 C1 Constant latching flush bolts – Wood doors Coordinators – Bar coordinators Flush bolts & coordinators FB51P Top and bottom bolts (pair).......................................................................................C6 FB51T Top bolt only...................................................................................................................C6 FB52 Top bolt with auxiliary fire latch.................................................................................. C7 FB53 Top bolt with auxiliary fire latch and retrofit plate................................................. C7 DP1 Dust proof strike - round face plate............................................................................. C16 DP2 Dust proof strike - rectangular face plate.................................................................. C16 How to order COR and accessories........................................................................................C17 B FB41P Top and bottom bolts (pair).......................................................................................C4 FB41T Top bolt only...................................................................................................................C4 FB41B Bottom bolt only............................................................................................................C4 FB42 Top bolt with auxiliary fire latch..................................................................................C5 Dust proof strikes Pulls &plates Automatic flush bolts – Wood doors A Automatic flush bolts – Metal doors Hinges & pivots Table of contents Manual flush bolts Latches, catches & bolts 261 Flush bolt - 4"..................................................................................................................... C10 262 Flush bolt - 6" square end................................................................................................C11 265 Flush bolt - 6" round end.................................................................................................C12 D Manual flush bolts – Wood doors FB358 Top or bottom bolts.....................................................................................................C13 Manual flush bolts – Metal doors FB457 Top or bottom bolts.................................................................................................... C14 FB458 Top or bottom bolts....................................................................................................C15 E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C1 Automatic flush bolts – Metal doors A Hinges & pivots FB31P Top and bottom bolts (pair) FB31T Top bolt only FB31B Bottom bolt only Certifications Meets ANSI A156.3 Type 25 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 10’0" Bottom bolt Top bolt C2 Flush bolts & coordinators B Pulls &plates For use with metal doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS D Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Hieight X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 27/32" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" E Stops Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options Exterior hardware Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". F Available accessory items G Miscellaneous hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C2 Ives Architectural hardware products Automatic flush bolts – Metal doors A B Pulls &plates For use with metal doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. FB32 Model with auxiliary fire latch eliminates the bottom bolt FB33 Model with auxiliary fire latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. Hinges & pivots FB32 Top bolt with auxiliary fire latch FB33 Top bolt with auxiliary fire latch and retrofit plate Certifications Auxiliary fire latch Flush bolts & coordinators Top bolt Meets ANSI A156.3 Type 25 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 8’0" Mounting 8-32 X 3/8" UFPHMS 10-12 X 1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS C3 Guide size Strike size Rub plate size (Width X Length X Height X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 27/32" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" Auxiliary fire latch size Retrofit plate size (Width X Length X Depth) (Width X Length X Thickness) 1" x 1-3/4" x 3-1/4" 1" x 6-3/4" x 3/32" D Body size (Width X Length X Depth) Latches, catches & bolts Dimensions Finishes Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 Brass US10 Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options F Satin bronze Oil rubbed bronze Exterior hardware 612 613 E Description Stops BHMA Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". Miscellaneous hardware Available accessory items Security pin screws DP1 and DP2 dust proof strike, see page C16 G Ives Architectural hardware products C3 Automatic flush bolts – Wood doors B Pulls &plates A Hinges & pivots FB41P Top and bottom bolts (pair) FB41T Top bolt only FB41B Bottom bolt only For use with wood doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Top bolt Certifications Bottom bolt Meets ANSI A156.3 Type 25 UL Listed 90 Min fire doors 8’0" X 8’0" Mounting C4 Flush bolts & coordinators 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" Stops D Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D E Custom finishes are available as engineering special, consult customer service. Available accessory items G Miscellaneous hardware F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C4 Ives Architectural hardware products Automatic flush bolts – Wood doors Meets ANSI A156.3 Type 25 UL Listed 20 Min fire doors 8’0" X 8’0" B Auxiliary fire latch Pulls &plates Certifications Top bolt Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS C5 Flush bolts & coordinators A For use with wood doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. FB42 Model with auxiliary fire latch eliminates the bottom bolt Low actuation forces—top bolt has no spring tension. Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Hinges & pivots FB42 Top bolt with auxiliary fire latch Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" (Width X Length X Depth) 1" x 1-3/4" x 3-1/4" D Finishes Latches, catches & bolts Auxiliary Fire Latch Size Substrate US Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D E Description 605 Stops BHMA Custom finishes are available as engineering special, consult customer service. Available accessory items F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 G Miscellaneous hardware Ives Architectural hardware products C5 Constant latching flush bolts – Metal doors A Hinges & pivots FB51P Top and bottom bolts (pair) FB51T Top bolt only B Pulls &plates For use with metal doors only Constant latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed. Low actuation forces Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. Certifications Meets ANSI A156.3 Type 27 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 8’0" Flush bolts & coordinators Top bolt C6 Bottom bolt Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS D Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Height X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 11/16" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" E Stops Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options Exterior hardware Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". F Available accessory items G Miscellaneous hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C6 Ives Architectural hardware products Constant latching flush bolts – Metal doors A B Pulls &plates For use with metal doors only Constant latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when closed.. − FB52 Model with auxiliary fire latch eliminates the bottom bolt − FB53 Model with auxiliary fire latch eliminates the bottom bolt and includes a retrofit plate to cover existing bottom bolt prep. Low actuation forces Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip. Hinges & pivots FB52 Top bolt with auxiliary fire latch FB53 Top bolt with auxiliary fire latch and retrofit plate Certifications Auxiliary fire latch Flush bolts & coordinators Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS Dimensions Guide size Strike size Rub plate size (Width X Length X Height X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 2" 1" x 1-27/32" x 11/16" x 3/32" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" Auxiliary fire latch size Retrofit plate size (Width X Length X Depth) (Width X Length X Thickness) 1" x 1-3/4" x 3-1/4" 1" x 6-3/4" x 3/32" D Body size (Width X Length X Depth) Latches, catches & bolts C7 Top bolt Meets ANSI A156.3 Type 27 Fits standard ANSI A115.4 door frame preparations. UL Listed 3 Hour fire doors 8’0" X 8’0" Finishes Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 Brass US10B Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Additional options F Oil rubbed bronze Exterior hardware 613 BLK E Description Stops BHMA Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24", 36" and 48". Miscellaneous hardware Available accessory items G Security pin screws DP1 and DP2 dust proof strike, see page C16 Ives Architectural hardware products C7 Constant latching flush bolts – Wood doors Pulls &plates A Hinges & pivots FB61P Top and bottom bolts (pair) FB61T Top bolt only For use with wood doors only Constant latching—inactive door remains latched until the active door is opened, releasing the automatic bottom bolt and then the top bolt can be manually released. Inactive door will relatch automatically when door closes. Low actuation forces Non-handed. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" B Top bolt Certifications Bottom bolt Meets ANSI A156.3 Type 27 UL Listed 90 Min fire doors 8’0" X 8’0" Mounting C8 Flush bolts & coordinators 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS Latches, catches & bolts Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" E Stops D Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D Custom finishes are available as engineering special, consult customer service. Available accessory items G Miscellaneous hardware F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 C8 Ives Architectural hardware products Constant latching flush bolts – Wood doors Certifications Meets ANSI A156.3 Type 27 UL Listed 20 Min fire doors 8’0" X 8’0" B Auxiliary fire latch Pulls &plates Top bolt Mounting 8-32 X 3/8" UFPHMS 10-12 X1-1/4" Plastic anchor 6-32 X 3/8 FPHMS 6 X 3/4 FPHSMS 8 X 1 FPHSMS 10 X 1 FPHSMS C9 Flush bolts & coordinators A For use with wood doors only Fully automatic—inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened − FB62 Model with auxiliary fire latch eliminates the bottom bolt Low actuation forces Non-handed Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Hinges & pivots FB62 Top bolt with auxiliary fire latch Dimensions Body size Guide size Strike size Rub plate size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 8-1/2" x 2" 1" x 6" x 1/8" 15/16" x 2-1/4" x 1/16" 1-1/4" x 1-11/16" x 3/64" (Width X Length X Depth) 1" x 1-3/4" x 3-1/4" D Latches, catches & bolts Auxiliary Fire Latch Size Finishes Substrate US Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B BLK Matte black Stainless steel – 629 Bright stainless steel Stainless steel US32 630 Satin stainless steel Stainless steel US32D E Description 605 Stops BHMA Custom finishes are available as engineering special, consult customer service. Available accessory items F Exterior hardware Security pin screws DP1 and DP2 dust proof strike, see page C16 G Miscellaneous hardware Ives Architectural hardware products C9 Manual flush bolts Hinges & pivots 261 Flush bolt - 4" A An exceptionally smooth working flush bolt with sharp, crisp lines Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Made from polished cast brass Bolt tip is 5/16" Diameter Bolt throw is 3/4" Bolt backset is 15/32" Certifications Pulls &plates Meets ANSI A156.16, L04201 B Mounting 5 X 5/8" FPHSMS 8 X 3/4" FPHSMS C10 Flush bolts & coordinators Dimensions Body size Strike size (Width X Length X Depth) (Width X Length) 3/4" x 4" x 1-1/8" 5/8" x 1-1/2" D Latches, catches & bolts Finishes BHMA Description Substrate US 605 Bright brass Brass US3 609 Satin brass Brass US5 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 625 Bright chrome Brass US26 626 Satin chrome Brass US26D G Miscellaneous hardware F Exterior hardware E Stops Custom finishes are available as engineering special, consult customer service C10 Ives Architectural hardware products Manual flush bolts A An exceptionally smooth working flush bolt with sharp, crisp lines Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Made from polished cast brass Bolt tip is 1/2" diameter Bolt throw is 1" Bolt backset is 15/32" Hinges & pivots 262 Flush bolt - 6" square end Certifications Pulls &plates Meets ANSI A156.16, L04201 B Mounting 5 X 5/8" FPHSMS 8 X 3/4" FPHSMS Dimensions Strike size (Width X Length) 3/4" x 6" x 1-11/32" 7/8" x 1-3/4" BHMA Description Substrate US 605 Bright brass Brass US3 609 Satin brass Brass US5 Brass US10B Satin nickel Brass US15 625 Bright chrome Brass US26 626 Satin chrome Brass US26D Custom finishes are available as engineering special, consult customer service. D Oil rubbed bronze Latches, catches & bolts 613 619 C11 Finishes Flush bolts & coordinators Body size (Width X Length X Depth) E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C11 Manual flush bolts Hinges & pivots 265 Flush bolt - 6" round end A A flush bolt with radiused bottom faceplate designed specifically for simple one-step router installation Double action spring design provides automatic holding of brass bolt in projected or retracted position, and assures ease of operation in conjunction with deep cup finger hole Faceplate is polished solid brass; bolt is made from aluminum zinc alloy Bolt tip is 1/2" diameter Bolt throw is 1" Bolt backset is 1/2" Pulls &plates Certifications B Meets ANSI A156.16, L042011 Mounting 5 X 5/8" FPHSMS 8 X 3/4" FPHSMS C12 Flush bolts & coordinators Dimensions Body size Strike size (Width X Length X Depth) (Width X Length) 3/4" x 6" x 1-7/16" 7/8" x 1-3/4" D Latches, catches & bolts Finishes BHMA Description Substrate US 605 Bright brass Brass US3 609 Satin brass Brass US5 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 625 Bright chrome Brass US26 626 Satin chrome Brass US26D G Miscellaneous hardware F Exterior hardware E Stops Custom finishes are available as engineering special, consult customer service. C12 Ives Architectural hardware products Manual flush bolts – Wood doors A B Pulls &plates When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf Reduces installation costs; requires only simple router mortise at top and bottom corners of doors Door strength and rigidity maintained by tying door faces to reinforcing extensions on guide with machine screws and bearing washers, not supplied Non-handed Bolt tip 1/2" diameter Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Not available for rabbeted door installations Hinges & pivots FB358 Top or bottom bolts Certifications Mounting C13 8 X 1" FPHSMS 8 X 3/4" FPHSMS Flush bolts & coordinators Meets ANSI A156.16, L04261 UL Listed 90 Minute fire doors 8’0" X 10’0". Fire rated openings require top and botom bolt. Dimensions Body size Guide Size Strike size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 1-3/8" 1" x 2-1/2" x 5/64" 15/16" x 2-1/4" x 5/64" Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK Brass US26 Satin chrome Brass US26D 643e/716 Aged bronze Brass – E Bright chrome Stops 625 626 D BHMA Latches, catches & bolts Finishes Custom finishes are available as engineering special, consult customer service. Available accessory items DP1 and DP2 dust proof strike, see page C16 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C13 Manual flush bolts – Metal doors Hinges & pivots FB457 Top or bottom bolts B Pulls &plates A When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed Bolt tip 1/2" diameter Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip Certifications Meets ANSI A156.16, L04261 UL Listed 3 Hour fire doors 8’0" X 10’0". Fire rated openings require top and bottom bolt. Flush bolts & coordinators Mounting 8-32 X 1" FPHMS C14 Dimensions Body size Guide Size Strike size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) 1-1/4" x 6-3/4" x 1-1/8" 1" x 2" x 5/64" 15/16" x 2-1/4" x 5/64" E Stops D Latches, catches & bolts Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 619 Satin nickel Brass US15 622 Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D 643e/716 Aged bronze Brass – Custom finishes are available as engineering special, consult customer service. Available options Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24" for fire rated doors with AHJ approval, 36" and 48" for non-fire rated doors Exterior hardware Available accessory items G Miscellaneous hardware F DP1 and DP2 dust proof strike, see page C16 C14 Ives Architectural hardware products Manual flush bolts – Metal doors B Pulls &plates Certifications A When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed Bolt tip 1/2" diameter Bolt throw is 3/4" with a 7/8" vertical adjustment Bolt backset is 3/4" Standard rod length is 12", which is measured from the center of the flush bolt body to the bolt tip Hinges & pivots FB458 Top or bottom bolts Meets ANSI A156.16, L04261 UL Listed 3 Hour fire doors 8’0" X 10’0". Fire rated openings require top and bottom bolt. 8-32 X 1" FPHMS C15 Dimensions Body size Guide Size Strike size (Width X Length X Depth) (Width X Length X Thickness) (Width X Length X Thickness) 1" x 6-3/4" x 1-1/8" 1" x 2" x 5/64" 15/16" x 2-1/4" x 5/64" Description Substrate US Bright brass Brass US3 Satin brass Brass US4 609 Blackened brass Brass US5 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B US15 Brass Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D 643e/716 Aged bronze Brass – E Satin nickel Matte black Stops 619 622 D 605 606 Latches, catches & bolts Finishes BHMA Flush bolts & coordinators Mounting Custom finishes are available as engineering special, consult customer service. Available options F Available accessory items Exterior hardware Optional rod lengths available for top bolt only on non-fire rated openings— 18", 24" for fire rated doors with AHJ approval, 36" and 48" for non-fire rated doors DP1 and DP2 dust proof strike, see page C16 G Miscellaneous hardware Ives Architectural hardware products C15 Dust proof strikes A Hinges & pivots DP1 Dust proof strike - round face plate DP2 Dust proof strike - rectangular face plate Designed for use with the bottom bolt of all flush bolts. Spring-loaded plunger returns to floor or threshold level anytime flush bolt is retracted, eliminating need to clean standard floor strikes. Strike hole is 3/4" diameter and 1-1/8" deep DP1 Certifications Meets ANSI A156.16, L14011 Pulls &plates Mounting B 8-32 X 1" FPHMS Flush bolts & coordinators Dimensions D Latches, catches & bolts C16 DP2 DP1 Face Plate DP2 Face Plate Body: (Diameter) (Width X Length X Thickness) (Diameter X Depth) 1-7/16" 1-5/8" x 3-1/2" x 1/8" 1-3/16" x 1-7/8" Finishes BHMA Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B * 619 Satin nickel Brass US15 622* Matte black Brass BLK 625 Bright chrome Brass US26 626 Satin chrome Brass US26D 643e/716* Aged bronze Brass – *Finishes only available with DP2 Custom finishes are available as engineering special, consult customer service Available accessory items G Miscellaneous hardware F Exterior hardware E Stops Security pin screws C16 Ives Architectural hardware products How to order – Bar coordinators Hinges & pivots How to order COR and accessories A COR 52 US28 FL20 D 36" COR size: 32, 42, 52, 60, 72 Pulls &plates B Finishes: US28, US26D, 315AN Filler bar (if desired): FL20, FL32, FL44 C17 Flush bolts & coordinators Vertical rod exit device cutout type (if applicable): A, B, C, D, E, F, G If other vertical rod exit device not listed on chart, from page C16, include information as shown on page C16. Active door size – Required for ALL vertical rod exit device applications To determine the size COR you need: INACTIVE LEAF ACTIVE LEAF W COORDINATOR V F STOP WIDTH STOP THICKNESS 36" Active door, 18" Inactive door, 5/8" stops Active door size, X = 36" Overall frame opening between stops, F = 52-3/4" Recommended coordinator: COR42 F Exterior hardware 48" Active door, 24" Inactive door, 5/8" stops Active door size, X = 48" Overall frame opening between stops, F = 94-3/4" Recommended coordinator: COR60 E Pair of 36" doors, 5/8" stops Active door size, X = 36" Overall frame opening between stops, F = 70-3/4" Recommended coordinator: COR52 INACTIVE DOOR WIDTH Stops Pair of 30" doors, 5/8" stops Active Door Size, X = 30" Overall frame opening between stops, F = 58-3/4" Recommended coordinator: COR42 Y ACTIVE DOOR WIDTH D Examples: X Latches, catches & bolts Start with the active door width (X) Next consider the overall frame opening between stops (F) Preferably, the coordinator would equal the active door width (X) + approximately 1/2 inactive door width (Y). The coordinator must be 6" longer than the active door width (X) and less than the overall frame opening between stop (F). G Miscellaneous hardware Ives Architectural hardware products C17 Hinges & pivots Coordinators - Special factory preparation A Special factory preparation for use with vertical rod exit devices Exit device number Device backset Maximum active door Coordinator size needed Coordinator cutout type Mounting bracket needed Von Duprin 5547-F 2-3/8" 33" 43" 51" 63" 42" 52" 60" 72" Type A None Von Duprin 8827-F 2-3/4" 33" 43" 51" 63" 42" 52" 60" 72" Type B MB1V, MB2V or MB3V see page C22 Von Duprin 8847-F 2-3/8" 33" 43" 51" 63" 42" 52" 60" 72" Type C None Von Duprin 33/3547 33/3547-F 98/9947 98/9947-F 2-3/4" 33" 43" 51" 64" 42" 52" 60" 72" Type D None Von Duprin 33/3548 33/3548-F 98/9948 98/9948-F 2-3/4" 33" 43" 51" 64" 42" 52" 60" 72" Type D None Von Duprin 33/3547WDC 33/3547WDC-F 98/9947WDC 98/9947WDCF 1-5/16" 33" 43" 51" 66" 42" 52" 60" 72" Type E None Falcon 17-C F-17-C 18-C F-18-C XX-C F-XX-C 24-C F-24-C 25-C F-25-C 2-3/4" 33" 43" 51" 63" 42" 52" 60" 72" Type F None Falcon 17-C -WDC F-17-C -WDC 18-C -WDC F-18-C -WDC XX-C -WDC F-XX-C -WDC 24-C-WDC F-24-C -WDC 25-C-WDC F-25-C-WDC 2-13/16" 33" 43" 51" 63" 42" 52" 60" 72" Type G None E Stops D Latches, catches & bolts C18 Flush bolts & coordinators B Pulls &plates Coordinators may need to be prepared at the factory for use with some surface or concealed vertical rod exit devices. (See chart) Exit device manufacturer If the exit device is not listed the following information is needed. G Miscellaneous hardware F Exterior hardware Exit device manufacturer and model no. Active door size, “X” Inactive door size, “Y” Exit device backset, “U” Stop width, “W” Stop thickness if other than 5/8", “V” C18 Ives Architectural hardware products Coordinators – Bar coordinators A Hinges & pivots COR Bar coodinators C19 Flush bolts & coordinators Meets ANSI A156.3 Type 21A UL Listed for installation on labeled frame B Certifications Pulls &plates The COR Series coordinators are designed for use on pairs of doors when one door needs to close before the other. All COR units function easily. The active door lever, located nearest to the active stop, holds the active door open until the trigger mechanism is released by the closing of the inactive leaf. All COR units do not function correctly with swingclear hinges. Consult factory when used with 3/4" offset pivots. All COR units are equipped with an adjustable override feature which allows the active door to close under extreme pressure. All COR units are compatible with flush bolts. For openings where doors are unequal size. The coordinator length should equal the active door width plus approximately 1/2 the inactive door width. The coordinator must be 6" longer than the active door width and shorter than the overall frame opening between stops. The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines. Material Substrate Aluminum 6000 Series Sizes Length of channel For opening widths Common applications COR32 32" 34" - 52" Pair of 2'0" Doors COR42 42" 52" - 72" Pair of 2'6" Doors COR52 52" 62" - 92" Pair of 3'0" Doors COR60 60" 70" - 108" Pair of 3'6" Doors COR72 72" 84" - 132" Pair of 4'0" Doors D Coordinator number Latches, catches & bolts The COR Series is available in five sizes for variable door opening widths. Finishes Substrate US Satin alumium Aluminum US28 711 Black anodized Aluminum 315AN 713 Satin chrome Aluminum US26D E Description 628 Stops BHMA Custom finishes are available as engineering special, consult customer service Available options F Exterior hardware Optional filler bars: FL20 - 20", FL32 - 32" and FL44 - 44", available to maintain clean line. Security pin screws Special prep cut-outs: Required for certain vertical exit device applications. See page C18 for common examples. If other vertical rod exit device not listed on chart is required, include required information as shown on page C18. Consult customer service for other applications. Available accessory items G Ives Architectural hardware products Miscellaneous hardware Optional mounting brackets available: MB1, MB2, MB1F, MB2F, MB3F, MB1V, MB2V and MB3V for other stop applied hardware. Security pin screws Replacement mounting package Replacement rub plate package C19 A Hinges & pivots Coordinators – Filler bars FL Filler bars The COR Series does not cover the entire length of the stop, so a FL filler bar can be provided to maintain architecturally clean lines. The FL filler bars are available in three sizes for variable frame openings. FL filler bars are field sized to frame opening. Certifications B Pulls &plates Meets ANSI A156.3 Type 21A UL Listed for installation on labeled frame Material Substrate Aluminum 6000 Series Sizes Flush bolts & coordinators Filler Bar number Length Dimensions C20 (Width X Depth X Length) FL20 20" 1-5/8" x 5/8" x 20" FL32 32" 1-5/8" x 5/8" x 32" FL44 44" 1-5/8" x 5/8" x 44" Finishes D Latches, catches & bolts BHMA Description Substrate US 628 Satin alumium Aluminum US28 711 Black anodized Aluminum 315AN 713 Satin chrome Aluminum US26D Custom finishes are available as engineering special, consult customer service Available accessory items G Miscellaneous hardware F Exterior hardware E Stops Security pin screws C20 Ives Architectural hardware products Coordinators – Mounting brackets A Allows stop mounted hardware to be properly installed without damaging the COR coordinator, such as a parallel arm closer or a non-fire-rated surface vertical rod strike. Stop mounted hardware will need to be lowered to compensate for the height of the coordinator and mounting bracket. Hinges & pivots MB1 and MB2 Mounting brackets Certifications Meets ANSI A156.3 Type 21A Material substrate B Sizes Pulls &plates Aluminum A380 Product Jamb depth Stop width Dimensions MB1 4-3/4" Min Over 2-1/2" 4" W x 3" D x 15/16" T MB2 4-3/4" Min Up to 2-1/2" 4" W x 3-1/4" D x 1-5/8" T BHMA Substrate US 600 Primed for paint Aluminum USP – Flat black painted Aluminum BLK 689 Aluminum painted Aluminum SP28 Custom finishes are available as engineering special, consult customer service. C21 Description Flush bolts & coordinators Finishes D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products C21 Coordinators – Mounting brackets A Hinges & pivots MB1F, MB2F and MB3F Mounting brackets MB1V, MB2V and MB3V Allows for stop mounted hardware to be properly installed without damaging the COR Coordinators, such as surface vertical rod exit device strikes. Latch will need to be lowered to compensate for the height of the coordinator and mounting bracket. MB-V are designed for Von Duprin 8827-F soffit latch. MB1V Certifications Pulls &plates Meets ANSI A156.3 Type 21A Material substrate B Cold rolled steel Flush bolts & coordinators Sizes C22 MB2V Product Jamb depth Stop width Dimensions MB1F 5" 1-1/2" - 2-1/4" 4" W x 3" D x 1-5/8" T MB1V 5" 1-1/2" - 2-1/4" 4" W x 3" D x 1-5/8" T MB2F 5-7/8" 2-3/8" - 3-1/4" 4" W x 3" D x 1-5/8" T MB2V 5-7/8" 2-3/8" - 3-1/4" 4" W x 3" D x 1-5/8" T MB3F 6-7/8" Over 3-3/8" 4"W x 3-1/2" D x 1"T MB3V 6-7/8" Over 3-3/8" 4"W x 3-1/2" D x 1"T Finishes Latches, catches & bolts BHMA D MB3V Description Substrate US 600 Primed for paint Steel USP – Flat black painted Steel BLK 689 Aluminum painted Steel SP28 G Miscellaneous hardware F Exterior hardware E Stops Custom finishes are available as engineering special, consult customer service C22 Ives Architectural hardware products Coordinators – Gravity coordinators B Pulls &plates Certifications A When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door. Non-handed. Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Hinges & pivots COR7G and COR9G Gravity coordinators Meets ANSI A156.3 Type 21B UL Listed for fire doors Mounting 8-32 X 1" FPHMS Forged brass Finishes Description Substrate US 605 Bright brass Brass US3 606 Satin brass Brass US4 612 Satin bronze Brass US10 613 Oil rubbed bronze Brass US10B 625 Bright chrome Brass US26 626 Satin chrome Brass US26D Security pin screws Replacement mounting package Replacement roller and bolt package Replacement rubber roller and pin package Replacement rub plate package F Exterior hardware E Available accessory items Stops Custom finishes are available as engineering special, consult customer service. D BHMA Latches, catches & bolts COR7G 7" projection − COR7G for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" COR9G 9" projection − COR9G for use on pairs of doors with astragal on active over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" C23 Sizes Flush bolts & coordinators Material substrate G Miscellaneous hardware Ives Architectural hardware products C23 Coordinators - Carry bar Hinges & pivots CB1 Carry Bar A Used when it is possible for the inactive door to be opened before the active door Prevents damage to the doors and other hardware Nylon roller insures quiet and efficient operation Non-handed Standard through bolts for mounting Certifications Meets ANSI A156.3 Type 21A Pulls &plates Material substrate B All-steel construction Dimensions Door closed Door open 1.5/8" X 5.3/4" 1.5/8" X 2.1/2" D Latches, catches & bolts C24 Flush bolts & coordinators Finishes BHMA Description Substrate US 600 Primed for paint Steel USP 632 Bright brass Steel US3 633 Satin brass Steel US4 639 Satin bronze Steel US10 640 Dark satin bronze Steel US10B 651 Bright chrome Steel US26 652 Satin chrome Steel US26D – Flat black coated Steel BLK Custom finishes are available as engineering special, consult customer service. Available accessory items G Miscellaneous hardware F Exterior hardware E Stops Security pin screws Replacement nylon roller and pin package C24 Ives Architectural hardware products Surface bolts, latches & catches Hinges & pivots A Table of contents Surface bolts SB360 Surface bolt....................................................................................................................D2 SB453 Surface bolt....................................................................................................................D2 SB1630 Surface bolt..................................................................................................................D3 SB1640 Surface bolt..................................................................................................................D3 SB1600M1 Surface bolt.............................................................................................................D4 SB1600M2 Surface bolt............................................................................................................D4 Pulls &plates Decorative surface bolts B 40 Surface bolt, decorative light duty ..................................................................................D5 253 Surface bolt, decorative heavy duty ..............................................................................D5 Dutch door & mortise door bolts 054 Dutch door bolt ................................................................................................................. D6 S48 Mortise door bolt .............................................................................................................. D6 Flush bolts & coordinators Door guards 481 Chain door guard.................................................................................................................D7 482 Solid bar door guard..........................................................................................................D7 C Roller latches/optional strikes D1 Latches, catches & bolts RL30 Roller latch....................................................................................................................... D8 RL30A Roller latch.................................................................................................................... D8 RL32 Roller latch........................................................................................................................ D8 RL32A Roller latch..................................................................................................................... D8 RL36 Roller latch....................................................................................................................... D9 RL36A Roller latch..................................................................................................................... D9 RL38 Roller latch....................................................................................................................... D9 RL1152 Roller latch....................................................................................................................D10 STK685 Strike...........................................................................................................................D10 STK685L Strike.........................................................................................................................D10 Both strikes:...............................................................................................................................D10 Angle stops AS895 Angle stop...................................................................................................................... D11 AS18 Angle stop......................................................................................................................... D11 Latches/catches E Stops CL11 Invisible latch.................................................................................................................... D12 CL12 Invisible latch................................................................................................................... D12 CL14 Invisible latch, auxiliary pusher.................................................................................... D12 CL21 Ball catch........................................................................................................................... D13 CL21A Ball catch........................................................................................................................ D13 CL22 Ball catch.......................................................................................................................... D13 325 Magnetic catch.................................................................................................................. D14 326 Magnetic catch, dual double pole................................................................................. D14 327 Magnetic catch, dual triple pole.................................................................................... D14 330 Roller catch........................................................................................................................ D15 335 Roller catch........................................................................................................................ D15 336 Roller catch........................................................................................................................ D15 345 Ball catch, adjustable......................................................................................................D16 347 Ball catch, dual adjustable - square corners..............................................................D16 349 Ball catch, dual adjustable - rounded corners............................................................D17 2 Elbow Catch............................................................................................................................D17 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products D1 Surface bolts Hinges & pivots SB360 Surface bolt B Pulls &plates A S urface bolt has 1-1/4" throw for maximum security Jimmy-resistant design, bolt locks automatically when thrown, can be released only be pressing knob toward door while retracting Ideal for all types of doors Available in 12" length Unit locks in both the up and down position Accepts padlock (not furnished) with maximum 3/8" diameter shackle, minimum 1-3/4" shackle opening height Units packed with one-way wood screws for added security - Standard wood screws also supplied Units packed with a universal top strike (US) Certifications Flush bolts & coordinators Dimensions Meets ANSI A156.16 UL listed for 3 hour fire doors, up to 10'0" Miami Dade County NOA listed Florida Building Commision listed FEMA 361 and 320 listed Bar: 3/4" wide x 3/4" thick Overall width: 2-1/32" Overall projection: 2-1/16" Top Strike: 1-1/2" wide x 1-1/2" long x 3/16" thick Available mortise strike: 1-5/8" wide x 3-1/2" long x 1/8" thick Material substrate C Heavy duty steel Available mortise strike Available accessory items Through bolt Mortise bottom strike (MS) Finishes Substrate Finish Clear zinc Steel US2C SB453 Surface bolt E D2 Latches, catches & bolts Description 604 Stops BHMA urface bolt has 1-3/16" throw for maximum security S Strong tension springs prevent creep Ideal for all types of doors Available 8" & 12" lengths Units packed with standard wood screws and machine screws to meet most field conditions Units packed with both a universal top strike (US) and a mortise bottom strike (MS) Certifications Dimensions Meets ANSI A156.16 L84161 UL listed for 3 hour fire doors, up to 10'0" Material substrate Exterior hardware Heavy duty steel Available accessory items F Through bolt Through bolts (machine screws with cap nuts) not intended for use as security screws Bar: 3/4" wide x 1/4" thick Overall width: 2-1/32" Overall projection: 1-5/16" Top Strike: 1-1/2" wide x 1-1/2" long x 3/16" thick Bottom strike: 1-5/8" wide x 3-1/2" long x 1/8" thick G Miscellaneous hardware Finishes BHMA Description Substrate Finish 604 632* 633* 639 640 643e/716 646 652 631 Clear zinc Bright brass Satin brass Satin bronze Oil rubbed bronze Aged bronze Satin nickel Satin chrome Matte black Steel Steel Steel Steel Steel Steel Steel Steel Steel US2C US3 US4 US10 US10B 643e/716 US15 US26D BLK * Only available in 8” bolt length. For other colors, consult factory. D2 Ives Architectural hardware products Surface bolts tandard surface bolt has 1" throw for maximum security S Ideal for all types of doors Fully concealed mounting prevents vandalism Units packed with wood and machine screws to meet most field conditions Comes end plug and end plug stud package Available in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations Material substrate B 1630 Meets ANSI A156.16 L84161 and UL listed for 3 hour fire doors, up to 8'0" 1640 Meets ANSI A156.16 L24161 Pulls &plates Certifications A Hinges & pivots SB1630 Surface bolt SB1640 Surface bolt 1630 Series is constructed of heavy duty steel 1640 Series is constructed of brass Flat bottom strike Dimensions Strike options T Top strike only B Bottom strike only TB Top and bottom strike* TL Locking bolt with top strike only BL Locking bolt with bottom strike only TBL Locking bolt with top and bottom strike* Body: 8" long x 7/8" wide x 3/4" thick, Overall knob or lock housing projection: 1-1/2" Top strike: 1-1/4" wide x 7/8" tall x 15/16" deep Bottom strike: 3" long x 1" wide x 1/8" thick * Available on SB1630 Only Security pin screw Through bolts available End plug and end plug stud package Cylinder package Replacement strike packages 1289 Standard key code 1360 1390 1395 D3 SB1630 Finishes BHMA 603 640 652 Finish US2G US10B US26D Bright brass Oil rubbed bronze Satin chrome Brass Brass Brass US3 US10B US26D E SUBSTRATE Steel Steel Steel Stops DESC Clear zinc Oil rubbed bronze Satin chrome SB1640 Finishes 605 613 626 Latches, catches & bolts Available accessory items Key code C Available options Flush bolts & coordinators Universal top strike For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products D3 Surface bolts A Hinges & pivots SB1600M1 Surface bolt SB1600M2 Surface bolt tandard surface bolt has 3-1/2" throw for maximum security and for doors with larger undercuts S Sleek handle design Ideal for all types of doors Fully concealed mounting prevents vandalism Available in locking version. Unit locks in both the up and down position. Locking bolts are furnished with 2 keys in 4 keying variations Units packed with wood and machine screws to meet most field conditions M1 version has Actuator tab pointing away from the door M2 version has Actuator tab pointing towards the door B Pulls &plates Certifications Meets ANSI A156.16 L84161 and UL Listed for 3 hour fire doors, up to 8'0" Optional flat bottom strike SB1600M2 SB1600M2-TL Optional universal strike Material substrate Constructed of heavy duty steel Available options Dimensions Strike options T Top strike only B Bottom strike only TL Top locking strike only BL Bottom locking strike only Bar: 11" long x 3/4" wide x 3/4" thick, locking version 1-1/2" thick Top strike: 1-1/4" wide x 7/8" tall x 15/16" deep Bottom strike: 3" long x 1" wide x 1/8" thick Available accessory items Latches, catches & bolts C Flush bolts & coordinators SB1600M1 Security pin screw Through bolts available End plug and end plug stud package Cylinder package Replacement strike packages Key code 1289 Standard key code 1360 1390 1395 D4 SB1630 Finishes BHMA 689 691 695 706 631 DESC Aluminum painted Dull bronze painted Dark bronze painted Dull brass painted Matte black G Miscellaneous hardware F Exterior hardware E Stops For other colors, consult factory. D4 Ives Architectural hardware products SUBSTRATE Steel Steel Steel Steel Steel Finish SP28 SP10 SP313 SP4 BLK Decorative surface bolts Hinges & pivots 40 Surface bolt, decorative light duty Material substrate Made from extruded brass B Dimensions Meets ANSI/BHMA A156.16 Pulls &plates Certifications A Recommended for 1-3/8" and 1-3/4" hollow core doors or door partitions Concealed screw design enhances appearance and security Exceptional strength and durability provided by interlocking construction of heavy gauge track and rod Permanent stop prevents rod disengagement from track Tension spring holds bolt in desired position Track assures smooth operation and interlocks with side edges of rod to eliminate marring Decorative 5/8" diameter knob designed to facilitate bolt operation Available in 3", 4" and 6" lengths Units packed with wood screws Packed with both universal and mortise strikes Flush bolts & coordinators Throw: 11/16" Projection: 3/4" Width: 11/16" Length: 3", 4" or 6" Finishes Mortise strike Substrate Finish Bright brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass B3 B5 B10B B15 B26 B26D 643e/716 BLK Latches, catches & bolts Description 605 609 613 619 625 626 643e/716 622 C Universal strike BHMA For other colors, consult factory. D5 253 Surface bolt, decorative heavy duty Dimensions Meets ANSI/BHMA A156.16 Material substrate Made from solid brass Finishes Throw: 1-1/8" Projection: 1-5/16" Half round rod: 5/8" Overall width: 1-5/8" Length: 8" or 12" Description Substrate Finish 605 613 626 Bright brass Oil rubbed bronze Satin chrome Brass Brass Brass B3 B10B B26D F BHMA Exterior hardware Certifications E Recommended for 1.3/4" or larger doors Heavy duty, decorative bolt ideal where extra strength required Decorative 1-1/4" diameter knob fits well with any décor and designed to facilitate bolt operation Available in 8" and 12" lengths. Optional lengths available, consult factory. Units packed with wood screws Packed universal strike (US) & mortise strike (MS) Stops For other colors, consult factory. Miscellaneous hardware Universal strike Mortise strike G Ives Architectural hardware products D5 Dutch door & mortise door bolts Hinges & pivots 054 Dutch door bolt Pulls &plates A Practical, rugged, attractive bolt for application on dutch doors as well as other areas Chamfered rod end draws the two leaves of door tightly together Sufficient tolerance provided in strike opening to allow for misalignment of door leaves and also prevents binding of bolt Decorative 1" diameter knob designed to facilitate bolt operation Units packed with wood screws Packed with Standard Strike (SS), Mortise Strike (MS) and Universal Strike (US) Certifications Dimensions Meets ANSI/BHMA A156.16 B Material substrate Made from solid brass Throw: 5/8" Projection: 1-1/8" Half round rod: 5/8" Overall width: 1-5/8" Rod length: 4-1/4" Overall length: specify 4-3/8" (including knob) Standard strike Mortise strike Universal strike C Flush bolts & coordinators Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass B3 B4 B10 B10B B15 B26 B26D Latches, catches & bolts For other colors, consult factory. D6 S48 Mortise door bolt Brass oval turn knob and escutcheon Steel bolt for extra strength Rack is milled for precision fit with pinion Units packed with wood screws Certifications Dimensions Meets ANSI/BHMA A156.16 Material substrate E Stops Made from brass and steel Exterior hardware Finishes BHMA Description Substrate Finish 605 609 613 619 625 626 Bright brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass B3 B5 B10B B15 B26 B26D G Miscellaneous hardware F For other colors, consult factory. D6 Ives Architectural hardware products Backset: 1-3/4" Bolt throw: 1/2" Bolt diameter: 1/2" Case: 2-1/2" long x 9/16" diameter Strike: 1-3/4" high x 7/8" wide Door guards Hinges & pivots 481 Chain door guard Dimensions Meets ANSI/BHMA A156.16 Door plate: 3-3/8" long x 1-3/8" wide Chain holder: 2" high x 3/4" wide Chain length: 6-1/4" Material substrate B Made from wrought brass or burnished wrought steel Pulls &plates Certifications A Permits the door to be slightly opened to allow viewing Narrow chain holder maintains chain in stationary position when door guard is not in use, eliminating marring of door and frame caused by dangling chain Welded twist link steel chain finished to match door plate and chain holder Packed with sheet metal screws Finishes - Brass and steel Substrate Finish 605 626 632 633 638 639 643e/716 646 651 652 631 Bright brass Satin chrome Bright brass Satin brass Blackened brass Satin bronze Aged bronze Satin nickel Bright chrome Satin chrome Matte black Brass Brass Steel Steel Steel Steel Steel Steel Steel Steel Steel B3 B26D F3 F4 F5 F10 F-643e/716 F15 F26 F26D F-BLK C Description Flush bolts & coordinators BHMA For other colors, consult factory. Material substrate Made from cast brass or cast zinc Available accessory items Dimensions - Cast zinc Shims available in US26D (626) only, 1/8" or 3/8" for brass only Plate - edge protection Strike plate: 2-1/2" high x 7/8" wide Holder: 2-1/2" high x 15/16" wide Arm length: 3-13/16" Finishes Brass Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B10 B10B B15 B26 B26D B-643e/716 B-BLK Description Bright brass Blackened brass Bright chrome Satin chrome Substrate Zinc Zinc Zinc Zinc Finish Z605E Z609E Z625E Z626E Finishes Zinc BHMA 677 --681 682 For other colors, consult factory. Ives Architectural hardware products G Substrate Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Miscellaneous hardware Description 605 606 612 613 619 625 626 643e/716 622 F BHMA Exterior hardware Cast zinc Strike plate: 2-5/8" high x 1-1/32" wide Holder: 1-3/4" high x 1-1/16" wide Arm length: 4-3/4" Edge guard: 1-1/8" high x 1-1/32" wide E Dimensions - Cast brass Meets ANSI/BHMA A156.16 Stops Certifications D7 Cast brass For use on doors that are flush with frames The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing The hinged bar allows the door guard to be positioned 180° away from the door when not in use Edge protection plate, furnished with cast brass door guards only, minimizes the chance for marring the door or frame. Can be purchased as a separate item for Aluminum substrate Strike plate is designed to prevent the solid bar from marring the inside of the door when in use Packed with sheet metal screws Latches, catches & bolts 482 Solid bar door guard D7 Roller latches A Hinges & pivots RL30 Roller latch RL30A Roller latch Pulls &plates Recommended for higher traffic applications Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted using adjusting screws on the face of the unit Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller standard Units packed with wood and machine screws to meet most field conditions RL30A model packed with ASA strike Certifications B Meets ANSI/BHMA A156.16, E19091 Available accessory items Flush bolts & coordinators Strike - ASA Security mounting screws Silencers Body: 1-1/8" wide x 2-1/4" high x 2-1/4" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" thick, lip to center- 1-1/4" Optional ASA strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" Material substrate Made from forged brass D8 Latches, catches & bolts C Dimensions Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 643e/716 622 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 US26 US26D 643e/716 BLK For other colors, consult factory. RL32 Roller latch RL32A Roller latch Exterior hardware E Stops Recommended light duty cabinet and closet applications Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning knurled knob on back of latch. Maximum projection of the roller is 1/2" allowing for variance in the door clearance Fits heavy-duty cylindrical lock cutout Nylon roller standard Non-handed Units packed with wood screws RL32A model packed with ASA strike Certifications Dimensions Meets ANSI/BHMA A156.16, E19091 Body: 1-1/8" wide x 2-1/4" high x 2-1/4" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" thick, lip to center - 1-1/4" Optional ASA strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" F Available accessory items Strike—ASA Material substrate Made from brass G Miscellaneous hardware Finishes D8 BHMA Description Substrate Finish 605 606 612 613 619 625 626 643e/716 622 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 US26 US26D 643e/716 BLK For other colors, consult factory. Ives Architectural hardware products Roller latches Made from stainless steel Available accessory items Strike—ASA BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D For other colors, consult factory. Body: 1-3/8" wide x 2" high x 7/8" deep Strike: 1" wide x 2-1/8" high x 3/8" deep Material substrate E Dimensions Meets ANSI/BHMA A156.16, L27092 Stops Certifications D9 Rim style roller latch Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning slotted screw Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller Non-handed Units packed with wood screws Latches, catches & bolts RL38 Roller latch C Finishes Flush bolts & coordinators Body: 1" wide x 2-1/4" high x 2" deep Strike: 1-1/8" wide x 2-3/4" high x 3/32" Thick, lip to center- 1-1/4" Optional ASA strike: 1-1/4" wide x 4-7/8" high x 3/32" thick, lip to center- 1-1/4" Material substrate B Dimensions Meets ANSI/BHMA A156.16, L57082 Pulls &plates Certifications A Recommended light duty cabinet and closet applications Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjusted by turning slotted screw on back of latch Maximum projection of the roller is 5/16" allowing for variance in the door clearance Fits cylindrical lock cutout Nylon roller Non-handed Units packed with wood screws RL36A model packed with ASA strike Hinges & pivots RL36 Roller latch RL36A Roller latch Made from stainless steel Finishes Description Substrate Finish 630 satin stainless Stainless steel US32D For other colors, consult factory. F Exterior hardware BHMA G Miscellaneous hardware Ives Architectural hardware products D9 Roller latches Hinges & pivots RL1152 Roller latch Pulls &plates A Recommended for higher traffic applications Combination of RL30 Roller Latch and Angle Stop Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed The projection of the roller is easily adjustable using adjusting screws on the face of the unit Maximum projection of the roller is 3/8" allowing for variance in the door clearance Nylon roller standard Forged brass construction Units packed with wood screws B 685 A&B Dim. Variable Certifications Dimensions Meets ANSI/BHMA A156.16, E19111 Body: 1-1/2" wide x 4-1/2" high x 1-3/4" deep with 3/4" angle Strike: 1-1/8" wide x 2-1/4" high x 5/32" thick Material substrate Made from forged brass Available accessory items Flush bolts & coordinators Security mounting screws Brass roller Silencers D10 Latches, catches & bolts C Finishes BHMA Description Substrate Finish 605 606 612 613 619 625 626 643e/716 622 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 US26 US26D 643e/716 BLK For other colors, consult factory. Optional Strikes 1-11/16" 3/32" STK685 Strike E Stops Dimple of strike centered on strike STK685L Strike Location of strike dimple is variable Please specify location of dimple from edge of frame to centerline of the dimple - B Dimple will be located B + 3/16" to accommodate lip A 1-5/32" 2-1/4" STK685 A B G Miscellaneous hardware F Exterior hardware Both strikes: STK685L Custom make strike for doors that swing both directions For use with roller latches Specify frame depth - A. Overall strike length will be A + 3/8" to accommodate 3/16" lip on each side Units packed with wood and machine screws to meet most field conditions Material substrate Dimensions Made from 3/32" brass Strike width: 2-1/4" Strike length: specified frame width + 3/8" Finishes BHMA Description Substrate Finish 605 606 612 613 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D For other colors, consult factory. D10 Ives Architectural hardware products Angle stops Material substrate Dimensions Made from 1/8" brass 1-1/2" wide x 1" angle x 2-1/2" long A Surface applied stop for single doors Large rubber bumper to ensure quiet operation Units packed with wood and machine screws to meet most field conditions Hinges & pivots AS895 Angle stop Available accessory items Security pin screws Substrate Finish Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D For other colors, consult factory. C AS18 Angle stop Surface applied stop for single and double doors Includes SR64 door silencers to ensure quiet operation SR64 silencers are replaceable Units packed with wood and machine screws to meet most field conditions Material substrate Dimensions Made from 3/16" brass 1-1/2" wide x 3/4" angle x 3-1/2" long D11 Latches, catches & bolts Flush bolts & coordinators Description 605 606 612 613 625 626 B BHMA Pulls &plates Finishes Available accessory items Security pin screws Finishes Substrate Finish 605 606 612 613 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D For other colors, consult factory. E Description Stops BHMA F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products D11 Invisible latches Hinges & pivots CL11 Invisible latch B Pulls &plates A Invisible latch is ideal for installations where no visible latch or strike is desired Unit can be installed at the top, bottom or side of the door Can be mortised into the stop or surface mounted to the stop Recommended for use on small panels, cabinet doors or light weight closet doors Operation is simple, latching is accomplished by a slight push To unlatch the door, a harder push releases the door and pushes the door out Brass and plastic construction Applies 13 pounds to open the door Units packed with wood screws Certifications Available accessory items Meets ANSI/BHMA A156.9, B03272 Security pin screws Material substrate Dimensions Made from brass and plastic Body: 1-1/4" wide x 1-7/8" high x 7/16" thick Strike: 9/16" wide x 1-5/16" high x 9/16" projection Flush bolts & coordinators See finishes below C CL12 Invisible latch D12 Latches, catches & bolts Invisible latch is ideal for installations where no visible latch is desired Unit can be installed at the top, bottom or side of the door Can be mortised into the stop or surface mounted to the stop Recommended for use on larger panels or regular size doors Operation is simple, latching is accomplished by a slight push To unlatch the door, a harder push releases the door and pushes the door out Brass and plastic construction Applies 27 pounds to open the door Units packed with wood screws Certifications Available accessory items Meets ANSI/BHMA A156.9, B03272 Security pin screws Material substrate Dimensions Made from brass and plastic Body: 1-1/4" wide x 2-1/4" high x 9/16" thick Strike: 5/8" wide x 1-13/16" high x 9/16" projection Stops See finishes below E CL14 Invisible latch, auxiliary pusher F Exterior hardware Aid in the operation of the CL11 and CL12 where hinges or surrounding conditions prevent smooth operation of doors Provides 1-1/16" throw Nylon pusher Applies 10 pounds to open the door Units packed with wood screws Certifications Available accessory items Meets ANSI/BHMA A156.9, B13282 Security pin screws Material substrate Dimensions Made from brass Body: 2-15/16" long x 1-11/16" wide x 5/8" deep Miscellaneous hardware See finishes below G C11, C12 and C14 Finishes BHMA Description Substrate Finish 605 606 612 626 Bright brass Satin brass Satin bronze Satin chrome Brass Brass Brass Brass US3 US4 US10 US26D For other colors, consult factory. D12 Ives Architectural hardware products Ball catches Body: 3/4" wide x 3" high x 3/4" deep Strike: 3/4" wide hex x 1-1/2" high Material substrate Made from brass B Dimensions Meets ANSI/BHMA A156.9 Pulls &plates Certifications A Four-way catch with hexagon stud Ideal for holding medium duty doors The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut Strike can enter body from any direction Spring tension is easily adjusted to suit field conditions Body can be surface applied or mortised Units packed with wood screws Hinges & pivots CL21 Ball catch Available accessory items Security pin screws BHMA Description Substrate Finish 626 Satin chrome Brass US26D C For other colors, consult factory. CL21A Ball catch Available accessory items Meets ANSI/BHMA A156.9, B13292 Security pin screws Material substrate Dimensions Made from brass Body: 3/4" wide x 3" high x 3/4" deep Strike: 7/16" wide x 1-3/4" high x 7/8" deep E Stops CL22 Ball catch D13 Certifications Latches, catches & bolts Four-way catch with plate type strike Ideal for closet doors, access doors, hinged openings and numerous other applications The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut Strike can enter body from any direction Spring tension is easily adjusted to suit field conditions Body can be surface applied or mortised Units packed with wood screws See finishes below Flush bolts & coordinators Finishes Available accessory items Meets ANSI/BHMA A156.9, B13302 Security pin screws Material substrate Dimensions Made from brass Body: 1/2" wide x 2-3/16" high x 1/2" deep Strike: 3/8" wide x 1-3/8" high x 5/8" deep CL21A and CL 22 Finishes Description Substrate Finish 605 606 612 625 626 Bright brass Satin brass Satin bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass US3 US4 US10 US26 US26D G BHMA Miscellaneous hardware See finishes below F Certifications Exterior hardware Three-way catch with plate type strike. Ideal for smaller cabinet doors or panels. The strike slides between two stainless steel balls that are under spring tension. As the strike engages, the door is held tightly shut. Strike can enter body from either side or front. Spring tension is easily adjusted to suit field conditions. Body can be surface applied or mortised. Units packed with wood screws For other colors, consult factory. Ives Architectural hardware products D13 Magnetic catches Hinges & pivots 325 Magnetic catch A Double pole Self aligning magnet ensures maximum pull Case design allows easy magnet adjustment on cabinet or small door applications. Packed with sheet metal screws 5 lbs. load capacity Certifications Dimensions Meets ANSI/BHMA A156.9, B43171 Case: 1-1/8" wide x 2-1/16" long x 5/8" thick Pulls &plates Material substrate Case made from aluminum B Finishes BHMA Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum A3 A92 C Flush bolts & coordinators For other colors, consult factory. 326 Magnetic catch, dual double pole D14 Latches, catches & bolts Dual double pole Self-aligning magnets ensure maximum pull Can be surface mounted or mortised Packed with sheet metal screws, 2 short strikes and 1 long strike 9 lbs. load capacity Certifications Dimensions Meets ANSI/BHMA A156.9, B43161 Case: 1" wide x 3-1/8" long x 9/16" thick Material substrate Case made from aluminum Finishes BHMA Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum A3 A92 E Stops For other colors, consult factory. 327 Magnetic catch, dual triple pole F Exterior hardware Dual triple pole • Self-aligning magnets insure maximum pull • Can be surface mounted or mortised. • Packed with sheet metal screws, 2 short strikes and 1 long strike • 14 lbs. load capacity Certifications Dimensions Meets ANSI/BHMA A156.9, B43161 Case: 1" wide x 3-1/8" long x 3/4" thick Material substrate Miscellaneous hardware Case made from aluminum G Finishes BHMA Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum A3 A92 For other colors, consult factory. D14 Ives Architectural hardware products Roller catches Most economical solution recommended for low frequency opening applications Independent rollers allow positive action and self-alignment Cushioned rollers absorb shock and noise, hold door away from cabinet Application allows for easy adjustment Packed with screws and brads Certifications Dimensions Meets ANSI/BHMA A156.9, B83071 Case: 1-1/4" high x 11/16" wide Strike: 1-1/4" high x 3/8" wide Made from wrought steel BHMA Description Substrate Finish 604 Clear zinc Steel F2C B Finishes Pulls &plates Material substrate A Hinges & pivots 330 Roller catch For other colors, consult factory. Face plate: 7/8" wide x 2-1/4" high Bore: 1-3/4" deep x 13/16" diameter Strike: 1-5/8" wide x 2-1/4" high, lip to center- 1-3/16" Material substrate Made from wrought brass See finishes below D15 Dimensions Meets ANSI/BHMA A156.16, L27081 for brass Latches, catches & bolts Certifications C Recommended for higher frequency opening applications Smooth, positive latching action insured by powerful conical spring Durable nylon roller insures quiet operation Adjustable tension. Adjustments can be varied from 4 to 17 lbs. of holding power making possible a wide range of door performance Easily installed on thin doors Full lip style strike designed for simplified mortising Packed with sheet metal screws Flush bolts & coordinators 335 Roller catch 336 Roller catch Material substrate Made from wrought brass See finishes below F Face plate: 7/8" wide x 2-1/4" high Bore: 13/16" diameter x 1-3/4" deep Strike: 7/8" wide x 2-1/4" high, lip to center- 1-1/8" Exterior hardware Dimensions Meets ANSI/BHMA A156.16, L27081 for brass E Certifications Stops Recommended for higher frequency opening applications Smooth, positive latching action insured by powerful conical spring Durable nylon roller insures quiet operation Adjustable tension. Adjustments can be varied from 4 to 17 lbs of holding power making possible a wide range of door performance Easily installed on thin doors Standard box type strike designed for neat appearance Packed with sheet metal screws 335 and 336 Finishes Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10 B10B B15 B26 B26D 643e/716 BLK For other colors, consult factory. Ives Architectural hardware products G Description 605 606 609 612 613 619 625 626 643e/716 622 Miscellaneous hardware BHMA D15 Ball catches Hinges & pivots 345 Ball catch, adjustable Pulls &plates A Recommended for lower frequency opening applications Ideal for cabinets and small interior doors Free rolling ball insures smooth, positive and trouble-free action Adjustable threaded barrel compensates for various door clearances Adjustable spring tension Units packed with wood screws Certifications Dimensions Meets ANSI/BHMA A156.9, B23013 Face plate: 3/4" wide x 1-1/2" high Bore: 1" deep x 9/16" diameter Strike: 25/32" wide x 1-1/2" high, lip to center- 13/32" Material substrate B Made from wrought brass C Flush bolts & coordinators Finishes BHMA Description Substrate Finish 605 609 612 613 619 625 626 Bright brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass US3 US5 US10 US10B US15 US26 US26D Latches, catches & bolts For other colors, consult factory. 347 Ball catch, dual adjustable - square corners D16 Recommended for lower frequency opening applications Ideal for cabinets and small interior doors Free rolling ball insures smooth, positive and trouble-free action Adjustable threaded barrel compensates for various door clearances Adjustable spring tension Rounded corners on strike lip for safety Units packed with wood screws Certifications Dimensions Meets ANSI/BHMA A156.9, B23013 Face Plate: 1" wide x 2-1/8" high Bore: 7/8" diameter x 1-3/8" deep Strike: 1-3/8" wide x 2-1/8" high, lip to center- 7/8" Stops Material substrate E Made from wrought brass F Exterior hardware Finishes BHMA Description Substrate Finish 605 606 609 612 613 619 625 626 643e/716 622 Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US3 US5 US10 US10B US15 US26 US26D 643e/716 BLK G Miscellaneous hardware For other colors, consult factory. D16 Ives Architectural hardware products Ball catches Recommended for lower frequency opening applications For catch in door installations Radiused corners allow easy installation with a router Dual adjustment for door clearance and holding strength Lip strike is designed for use where strike is mounted in jamb Free rolling ball insures smooth, positive and trouble-free action Adjustable threaded barrel compensates for various door clearances Adjustable spring tension Rounded corners on strike lip for safety Units packed with wood screws A Dimensions Meets ANSI/BHMA A156.9, B23013 Face Plate: 1" wide x 2-1/8" high Bore: 7/8" diameter x 1-3/8" deep Strike: 1-3/8" wide x 2-1/8" high, lip to center- 7/8" Material substrate Made from wrought brass Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Matte black Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US3 US5 US10 US10B US15 US26 US26D 643e/716 BLK Latches, catches & bolts Description 605 606 609 612 613 619 625 626 643e/716 622 C BHMA Flush bolts & coordinators Finishes B Certifications Pulls &plates Hinges & pivots 349 Ball catch, dual adjustable - rounded corners For other colors, consult factory. D17 2 Elbow Catch Ideal for use on the inactive leaf of a pair of cabinet doors Surface applied, making installation simple Spring loaded function - surface applied, making installation simple Made from cast aluminum E Stops Certifications Meets ANSI/BHMA A156.9 B33023 Dimensions Plate: 1-3/8" high x 5/8" wide Strike: 13/16" high x 5/8" wide A3 BHMA 666 A5 A14 A15 A92 669 670 673 A716 F Ives Number Exterior hardware Finishes - Aluminum G Miscellaneous hardware Ives Architectural hardware products D17 G Miscellaneous hardware F Exterior hardware E Stops D18 Latches, catches & bolts C Flush bolts & coordinators B Pulls &plates A Hinges & pivots Notes D18 Ives Architectural hardware products Door stops Kick down holders FS452 Kick down holder..........................................................................................................E15 FS455 4" Kick down holder.................................................................................................... E16 FS544 4" Kick down holder.................................................................................................... E16 FS555 5" Kick down holder.................................................................................................... E16 Plunger type door holders FS1153 Plunger type door holder............................................................................................E17 FS1154 Plunger type door holder............................................................................................E17 Roller bumpers RB470 Offset roller bumper................................................................................................... E18 RB471 4-1/2" Roller bumper.................................................................................................. E18 RB472 6" Roller bumpers........................................................................................................ E18 Residential door stops 060 3" Flexible door stops..................................................................................................... E19 061 4" Flexible door stops..................................................................................................... E19 60 3-3/4" Base door stops.................................................................................................... E20 61 3-1/8" Base door stops..................................................................................................... E20 63 Flexible door stops.............................................................................................................E21 64 Base door stop.....................................................................................................................E21 69 Hinge pin door stops..........................................................................................................E22 70 Hinge pin door stops...........................................................................................................E23 72 Hinge pin door stops...........................................................................................................E24 73 Hinge pin door stops...........................................................................................................E24 D Latches, catches & bolts Door silencers SR64 Door silencer - metal.....................................................................................................E25 SR65 Door silencer - wood.....................................................................................................E25 SR66 Door silencer - adhesive...............................................................................................E25 E1 Stops WS11 Wall stop - drywall/wood............................................................................................E9 WS11X Wall stop - masonry......................................................................................................E9 WS20 Manual wall holders - drywall/wood........................................................................E9 WS20X Manual wall holders - masonry................................................................................E9 WS33 Wall stops - drywall/wood........................................................................................ E10 WS33X Wall stops - masonry............................................................................................... E10 WS65 Wall stop........................................................................................................................ E10 WS401/402CVX (Convex) wall bumpers.............................................................................E11 WS401/402CCV (Concave) wall bumpers...........................................................................E11 WS404CVX (Convex) wall bumpers......................................................................................E11 WS406/407CVX (Convex) wall bumpers...........................................................................E12 WS406/407CCV (Concave) wall bumpers.........................................................................E12 411R-W Wall bumper - adhesive.............................................................................................E12 WS40 Automatic wall holder................................................................................................ E14 WS45 Automatic wall holder - drywall/wood................................................................. E14 WS45X Automatic wall holder - masonry......................................................................... E14 C Wall stops/bumpers Automatic wall holders Flush bolts & coordinators FS9 Floor stop & semi-automatic holder............................................................................. E7 FS40 Floor stop & automatic holder..................................................................................... E7 FS41................................................................................................................................................ E7 FS42............................................................................................................................................... E7 FS43............................................................................................................................................... E7 FS446 Floor stop & manual door holder - masonry...........................................................E8 FS450 Floor stop & manual door holder - drywall/wood.................................................E8 FS495 Wall stop & automatic holder....................................................................................E8 FS496 Floor stop & automatic holder - 3/8" max clearance..........................................E8 FS497 Floor stop & automatic holder - 1" max clearance................................................E8 WS443 Wall stop - masonry...................................................................................................E13 WS447 Wall stop - drywall/wood.........................................................................................E13 WS445 Manual wall holder - masonry.................................................................................E13 WS449 Manual wall holder - drywall/wood.......................................................................E13 B Floor stops & holders Wall stops & holders Pulls &plates FS13 Dome stop........................................................................................................................... E2 R14 Dome stop rise..................................................................................................................... E2 FS17 Dome stop........................................................................................................................... E2 FS436 Dome stop....................................................................................................................... E3 FS438 Dome stop....................................................................................................................... E3 R435 Riser for FS436 Dome stop............................................................................................ E3 R437 Riser for FS438 Dome stop............................................................................................ E3 FS439 Universal dome floor stop...........................................................................................E4 FS410 Decorative floor stop.....................................................................................................E4 FS18S Floor stop - 1 1/2"............................................................................................................E5 FS18L Floor stop - 3 1/2"...........................................................................................................E5 FS434 Floor stop........................................................................................................................E5 430 Floor door stop....................................................................................................................E5 FS441 Floor stop.........................................................................................................................E6 FS444 Floor stop - masonry.....................................................................................................E6 FS448 Floor stop - drywall/wood..........................................................................................E6 A Floor stops Hinges & pivots Table of contents Crash stop CS115 Crash stop........................................................................................................................E26 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E1 Floor stops — dome Hinges & pivots FS13 Dome stop Standard FS13 for use where no threshold is used Heavy-duty cast dome stops constructed of brass Unique riser design of R14 (below) allows easy conversion to threshold application Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete Replaceable- grey rubber bumper A Certifications B Pulls &plates Meets ANSI/BHMA A156.16, L12141 Material substrate Dimensions Made from cast brass Overall height: 1" Base height: 5/32" Base diameter: 1-3/4" Available accessory items Security pin screws Grey rubber bumper Flush bolts & coordinators See finishes below R14 Dome stop rise C Adapts the FS13 Dome stop to threshold use. Material substrate Dimensions Made from cast brass Riser height: 5/16" Base diameter: 1-3/4" round Latches, catches & bolts See finishes below FS17 Dome stop D One piece dome stop for use with thresholds Heavy-duty cast dome stops constructed of brass Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete Grey rubber bumper Certifications E2 Stops Meets ANSI/BHMA A156.16, L12161 Material substrate Dimensions Made from cast brass Overall height: 1-11/32" Base height: 1/2" Base diameter: 1-3/4" round Available accessory items Security pin screws Grey rubber bumper Exterior hardware See finishes below Miscellaneous hardware F FS13, R14 and FS17 Finishes BHMA Description Substrate Finish 605 606 612 613 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D G For other colors, consult factory. E2 Ives Architectural hardware products Floor stops — dome FS436 for doors without threshold FS438 for doors with threshold or undercut doors Heavy-duty cast dome stops Packed with fasteners for light duty masonry and wood applications Grey rubber bumper A Hinges & pivots FS436 Dome stop FS438 Dome stop Certifications FS436 Dimensions Made from cast brass or aluminum FS436 Overall height: 1" Base height: 3/16" Base diameter: 1-3/4" x 2" oval Available accessory items Security pin screws Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 Finishes - Aluminum BHMA Description Substrate Finish 628 Satin aluminum Aluminum US28 D Description 605 606 609 612 613 619 622 625 626 --- Latches, catches & bolts BHMA C Finishes - Brass FS438 Flush bolts & coordinators FS438 Overall height: 1-3/8" Base height: 9/16" Base diameter: 1-3/4" x 2" oval B Material substrate Pulls &plates FS436 Meets ANSI/BHMA A156.16, L12141 for brass and L32141 for aluminum FS438 Meets ANSI/BHMA A156.16, L12161 for brass and L32161 for aluminum For other colors, consult factory. E3 Stops R435 Riser for FS436 Dome stop R437 Riser for FS438 Dome stop R435 for conversion of FS436 Dome stop to carpet installation R437 For conversion of FS438 Dome stop to carpet installation Packed with fasteners for heavy duty masonry and wood applications Made from aluminum, mill finish F Dimensions Base diameter: 1" X 1-7/16" oval Heights: available in 1/4", 3/8", 1/2" 5/8", 3/4" and 1" height 1" Exterior hardware Material substrate Miscellaneous hardware 1-7/16" G 1" OR LESS PAD FLOOR Ives Architectural hardware products E3 Floor stops Hinges & pivots FS439 Universal dome floor stop A High or low-rise mount Spring-loaded rubber contact Packed with fasteners for light duty masonry and wood applications Grey rubber bumper Certifications Dimensions Meets ANSI/BHMA A156.16 Material substrate B Pulls &plates Made from cast zinc or stainless steel Overall height: 1-1/2" Pad height: 1-1/8" Base height: 1/4" Base diameter: 1-7/8" C Flush bolts & coordinators Finishes - Zinc BHMA Description Substrate Finish 676 677 678 704 --681 682 --- Matte black Bright brass Satin brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc BLK US3 US4 US10B US15 US26 US26D 643e/716 Latches, catches & bolts Finishes - Stainless steel BHMA Description Substrate Finish 630 Satin Stainless Stainless steel US32D D For other colors, consult factory. FS410 Decorative floor stop E4 Stops Non-directional Packed with fasteners for light duty masonry and wood applications. Black rubber ring Certifications Dimensions Meets ANSI/BHMA A156.16 Overall height: 1-1/2" Bumper thickness: 1/4" Diameter: 1-1/4" Material substrate Exterior hardware Made from cast brass Miscellaneous hardware F Finishes BHMA Description Substrate Finish 605 619 622 625 626 --- Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass US3 US15 BLK US26 US26D 643e/716 G For other colors, consult factory. E4 Ives Architectural hardware products Floor stops Security door stops designed for use in high vandalism areas Molded from black flame resistant, resilient material around a heavy-duty stud Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed Ideal for jail or security cell areas where floor mounted stops are required FS18L also ideal for concrete wall applications Finishes Black rubber FS18S FS18S Height: 1-1/2" FS18S Diameter: 2" FS18S Stud length: 2-1/2" FS18L Height: 3-1/2" FS18L Diameter: 2" FS18L Stud length: 2-1/2" B Dimensions Made from rubber Pulls &plates Material substrate A Hinges & pivots FS18S Floor stop - 1 1/2" FS18L Floor stop - 3 1/2" FS18L Material substrate Dimensions Made from wrought steel Overall height: 2-5/8" Base size: 1-1/2" W x 2-3/4" L Available accessory items C For undercut doors up to 1-1/2" Packed with fasteners for light duty masonry and wood applications Soft, resilient black rubber Flush bolts & coordinators FS434 Floor stop Replaceable soft, resilient black rubber. Description Substrate Finish 604 Zinc Plated Steel US2C 430 Floor door stop D BHMA Latches, catches & bolts Finishes For undercut doors up to 1-1/2". Welded wood screws for wood applications. White rubber tip Overall height: 1-5/16" Base diameter: 1-1/4" Available accessory items E5 Dimensions Made from cast brass and aluminum Stops Material substrate Replaceable white tips Black rubber tips Finishes - Brass Substrate Finish Bright brass Satin brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10B US15 US26 US26D Description Substrate Finish 666 --669 673 Bright brass Blackened brass Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A92 For other colors, consult factory. Ives Architectural hardware products G BHMA Miscellaneous hardware Finishes - Aluminum F Description 605 606 609 613 619 625 626 Exterior hardware BHMA E5 Floor stops Hinges & pivots FS441 Floor stop A Accommodates door undercut up to 1-1/2" Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts Grey non-marring rubber bumper Packed with fasteners for heavy duty masonry and wood applications Certifications Dimensions Meets ANSI156.16, L12131 Overall height: 2-1/8" Overall length: 2-7/8" Base depth: 1-5/8" Pulls &plates Material substrate Made from cast brass B Available accessory items Replaceable grey non-marring rubber bumper Latches, catches & bolts C Flush bolts & coordinators Finishes - Zinc BHMA Description Substrate Finish 605 606 609 612 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 For other colors, consult factory. D FS444 Floor stop - masonry FS448 Floor stop - drywall/wood Ideal for interior or exterior use Accommodates door undercut up to 2-1/2" Replaceable black non-marring rubber tip FS444 is packed with fasteners for heavy duty masonry applications FS448 is packed with fasteners for drywall/wood applications Certifications E6 Stops FS444 Meets ANSI/BHMA 156.16, L12131 for brass FS448 Meets ANSI/BHMA 156.16, L12121 for brass and L32121 for aluminum FS444 Material substrate Dimensions Made from cast brass and aluminum Overall height: 3" Base diameter: 2-1/2" Available accessory items Exterior hardware Replaceable black non-marring rubber bumper G Miscellaneous hardware F Finishes - Brass BHMA Description Substrate Finish 605 606 609* 612 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 Finishes - Aluminum BHMA Description Substrate Finish 628* Satin aluminum Aluminum US28 For other colors, consult factory. * Not available on FS444. E6 Ives Architectural hardware products Floor stops & holders Hinges & pivots FS9 Floor stop & semi-automatic holder Available accessory items Meets ANSI/BHMA 156.16, L11241 Security pin screws Replaceable hook package Material substrate Pulls &plates Certifications A Semi-automatic floor-mounted holders accommodates with door to floor clearance of 1-1/2" or less Activate holder by flipping the engagement tongue forward. When door is opened, the hook (mounted on door) engages the tongue. To release, push firmly on door to disengage tongue Packed with fasteners for extra-heavy duty masonry and wood applications B Dimensions Made from cast brass Overall height: 3-1/2" Base dimensions: 2" wide x 3-1/2" long Finishes Substrate Finish Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US26 US26D C Description 605 606 612 613 625 626 Flush bolts & coordinators BHMA For other colors, consult factory. Latches, catches & bolts FS40 Floor stop & automatic holder FS41 FS42 FS43 Made from forged brass Strike Packages Finishes BHMA 605 606 612 1-3/4” 613 625 626 1/2” 1-3/16” SIDE VIEW BODY Substrate CLEARANCE FROM 1-1/8 to 1-9/16 Finish US3 US4 US10 US10B US26 US26D For other colors, consult factory. G Miscellaneous hardware F40 MAX. DOOR CLEARANCE Description Bright brass Brass Satin brass Brass 2-1/4” Satin bronze Brass CLEARANCE Oil rubbed bronze Brass FROM 9/16 to 1-1/16 Bright chrome Brass Satin chrome Brass F 1/8” CLEARANCE Available accessory items CLEARANCE FROM 9/16 to 1-1/16 E7 Material substrate 1-3/4” Door to floor clearance: FS40 1/2" or less FS41 9/16" to 1-1/16" FS42 1-1/8" to 1-9/16" FS43 1-5/8" to 2-1/16" Holder dimensions: 3" wide x 3-11/16" high Exterior hardware Dimensions Meets ANSI/BHMA 156.16, L11301 Stops Certifications D Automatic door holders ideal for heavy-traffic situations that require a simple, foolproof, Hold-open device Unit is activated automatically when door is opened. A firm pull on door releases the mechanism Strikes accommodate different door to floor clearances Model numbers are determined by strike/door-to-floor clearances Holder position on door is adjustable Packed with fasteners for heavy duty masonry and wood applications 1-3/4” CLEARANCE FROM 9/16 to 1-1/16 FS41 2-1/4” CLEARANCE FROM 1-1/8 to 1-9/16 FS42 CLEARANCE FROM 1-5/8 to 2-1/16 2-3/4” FS43 Ives Architectural hardware products E7 Floor stops & holders Manual type floor holder ideal for interior or exterior use Accommodates door undercut up to 2-1/2" Replaceable black non-marring rubber tip Unit functions as a stop but serves as a hold-open device when hook is manually engaged in strike. Unit requires manual disengagement to release hold-open FS446 is packed with fasteners for heavy duty masonry applications FS450 is packed with fasteners for drywall/wood applications Certifications FS446 FS446 Meets ANSI/BHMA 156.16, L11371 for brass and L31371 for aluminum FS450 Meets ANSI/BHMA 156.16, L11361 for brass and L31361 for aluminum B Pulls &plates A Hinges & pivots FS446 Floor stop & manual door holder - masonry FS450 Floor stop & manual door holder - drywall/wood Material substrate Dimensions Made from cast brass and aluminum Available accessory items Flush bolts & coordinators Replaceable black non-marring rubber bumper Overall height: 3-3/4" Height from floor to stop center line: 2-5/8" Stop diameter: 1-1/16" Base diameter: 2-1/12" Finishes - Brass C BHMA D Latches, catches & bolts 605 606 612 613 619 622 625 626 --- Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Finish Brass Brass Brass Brass Brass Brass Brass Brass Brass US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum For other colors, consult factory. E8 Stops FS495 Wall stop & automatic holder FS496 Floor stop & automatic holder - 3/8" max clearance FS497 Floor stop & automatic holder - 1" max clearance FS495 Automatic door holders ideal for heavy-traffic situations that require a simple, holdopen device Recommended installation is holder on door and strike on wall Holder position on door is adjustable Holder is tapered to prevent “child riding” Packed with fasteners for heavy duty masonry and drywall/wood applications Exterior hardware Certifications Miscellaneous hardware F FS495 Meets ANSI/BHMA 156.16, L11291 for brass FS496 Meets ANSI/BHMA 156.16, L11301 for brass FS497 Meets ANSI/BHMA 156.16, L11301 for brass Material substrate Dimensions Made from cast brass FS495 Holds door 3-3/4" from wall. FS496 Door to floor clearances 3/8" maximum. FS497 Door to floor clearances 1" maximum Finishes G BHMA 605 606* 612 613 625 626 E8 Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Substrate Brass Brass Brass Brass Brass Brass For other colors, consult factory. * Not available on FS496 and FS497. Ives Architectural hardware products Finish US3 US4 US10 US10B US26 US26D Wall stops WS11 Security pin screws Replaceable black non-marring rubber bumper Material substrate Made from cast brass Base diameter: 2" Overall projection: 3-3/4" Finishes Substrate Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US26 US26D For other colors, consult factory. WS20 D Hexagon section on unit aids in fastening unit when expansion shield is used Replaceable black rubber bumpers feature off-set shoulder and threaded shank that screws into body of holder Hinged strike furnished matches body material and finish WS20 is packed with fasteners for drywall/wood applications WS20X is packed with fasteners for heavy duty masonry applications Latches, catches & bolts WS20 Manual wall holders - drywall/wood WS20X Manual wall holders - masonry C Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Flush bolts & coordinators BHMA 605 606 612 613 625 626 Dimensions B Available accessory items WS11 Meets ANSI/BHMA 156.16, L12011 WS11X Meets ANSI/BHMA 156.16, L12021 Pulls &plates Certifications A Hexagon section on unit aids in fastening unit when expansion shield is used Replaceable black rubber bumpers features off-set shoulder and threaded shank that screws into body of unit WS11 is packed with fasteners for drywall/wood applications WS11X is packed with fasteners for heavy duty masonry applications Hinges & pivots WS11 Wall stop - drywall/wood WS11X Wall stop - masonry Certifications Dimensions Made from cast brass or aluminum Available accessory items Security pin screws Replaceable black non-marring rubber bumper Base diameter: 2-3/8" Overall projection: 4" Strike height: 2" Strike width: 1" Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum For other colors, consult factory. Ives Architectural hardware products G Finish US3 US4 US10 US10B US26 US26D Miscellaneous hardware Substrate Brass Brass Brass Brass Brass Brass F BHMA 605 606 612 613 625 626 Exterior hardware Finishes - Brass E9 Material substrate Stops WS20 Meets ANSI/BHMA 156.16, L11341 for brass and L31341 for aluminum WS20X Meets ANSI/BHMA 156.16, L11351 for brass and L31351 for aluminum E9 Wall stops A Hinges & pivots WS33 Wall stops - drywall/wood WS33X Wall stops - masonry Replaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft Sloping design discourages vandalism WS33 is packed with fasteners for drywall/wood applications. WS33X is packed with fasteners for heavy duty masonry applications Pulls &plates Certifications B WS33 Available accessory items WS33 Meets ANSI/BHMA 156.16, L12011 Security Pin screws WS33X Meets ANSI/BHMA 156.16, L12021 Replaceable black non-marring rubber bumper Material substrate Made from cast brass Base diameter: 2-1/4" wide x 3" high Overall projection: 3-3/4" Finishes BHMA 626 Flush bolts & coordinators Dimensions Description Satin chrome Substrate Brass Finish US26D C For other colors, consult factory. WS65 Wall stop Latches, catches & bolts Replaceable non-marring white rubber bumper Packed with fasteners for wood applications Material substrate Dimensions Made from cast aluminum Base diameter: 1-5/8" Overall projection: 3-3/4" D Available accessory items Replaceable white non-marring rubber bumper Replaceable black non-marring rubber bumper Finishes Stops E10 BHMA 666 668 703 --- Description Bright brass Satin bronze Oil rubbed bronze Clear satin aluminum G Miscellaneous hardware F Exterior hardware For other colors, consult factory. E10 Ives Architectural hardware products Substrate Aluminum Aluminum Aluminum Aluminum Finish US3 US10 US10B US27 Wall bumpers Certifications B WS401/402CVX Meets ANSI/BHMA 156.16, L12101 WS401/402CCV Meets ANSI/BHMA 156.16, L12251 Material substrate Dimensions Made from cast brass Base diameter: 2-1/2" Base thickness: 3/8" Overall projection: 1" Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Substrate Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 US26 US26D C BHMA 605 606 612 613 619 625 626 Flush bolts & coordinators Finishes - Brass Pulls &plates WS401CCV & WS402CCV A Constructed in heavy-duty cast brass Special retainer ring makes rubber tamper resistant Grey rubber bumper WS401/402CVX – convex rubber bumper, packed with fasteners for drywall/wood applications WS401/402CCV – concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications Hinges & pivots WS401/402CVX (Convex) wall bumpers WS401/402CCV (Concave) wall bumpers For other colors, consult factory. D Compact size Constructed in cast brass Totally concealed mounting discourages vandalism or tampering Unit furnished with grey convex rubber bumper Packed with fasteners for drywall/wood applications Base diameter: 1" Overall projection: 17/32" Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 For other colors, consult factory. F Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Exterior hardware BHMA 605 606 609 612 613 619 622 625 626 --- E11 Dimensions Made from cast brass Stops Material substrate Finishes - Brass Latches, catches & bolts WS404CVX (Convex) wall bumpers G Miscellaneous hardware Ives Architectural hardware products E11 Wall bumpers A Hinges & pivots WS406/407CVX (Convex) wall bumpers WS406/407CCV (Concave) wall bumpers Constructed in sturdy yet economical wrought base of brass or stainless steel construction Feature concealed tamper-proof mounting Shipped factory preassembled backplate to reduce installation cost Easy installation by inserting screwdriver through small hole in rubber WS406/407CVX – convex rubber bumper, packed with fasteners for drywall/wood applications WS406/407CCV – concave rubber bumper which avoids damage to locks with projecting buttons, packed with fasteners for drywall/wood applications Pulls &plates B WS406CVX & WS407CVX Certifications Flush bolts & coordinators WS406/407CVX Meets ANSI/BHMA 156.16, L22201 for brass and L52201 for stainless steel WS406/407CCV Meets ANSI/BHMA 156.16, L22251 for brass and L52251 for stainless steel Material substrate Dimensions Made from brass and stainless steel Base diameter: 2-1/2" Base thickness: 3/8" Overall projection: 1" Finishes - Brass D Latches, catches & bolts C BHMA 605 606 609 612 613 619 622 625 626 --- Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US5 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Stainless steel Finish US32D Finishes - Stainless steel BHMA 630 Description Stainless steel Stops E12 For other colors, consult factory. 411R-W Wall bumper - adhesive F Exterior hardware Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only Non-marring white rubber Concave design permits knob to strike stop without damaging or engaging lock mechanism Material substrate Dimensions Made from rubber Base diameter: 1-7/8" Base thickness: 3/8" Overall projection: 1-1/16" Finishes G Miscellaneous hardware BHMA --- E12 Ives Architectural hardware products Description White Substrate Rubber Finish R-W Wall stops & holders WS443 Ideal for interior or exterior use Replaceable black non-marring rubber tip WS443 is packed with fasteners for heavy duty masonry applications WS447 is packed with fasteners for drywall/wood applications Certifications WS443 Meets ANSI/BHMA 156.16, L12021 for brass and L32021 for aluminum WS447 Meets ANSI/BHMA 156.16, L12011 for brass and L32011 for aluminum Base diameter: 2-1/4" Overall projection: 3-11/16" Replaceable black non-marring rubber bumper Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 For other colors, consult factory. D WS445 Manual wall holder - masonry WS449 Manual wall holder - drywall/wood Unit functions as a stop but serves as a hold-open device when hook is manually engaged in strike Unit requires manual disengagement to release hold-open Replaceable black non-marring rubber tip WS445 is packed with fasteners for heavy duty masonry applications WS449 is packed with fasteners for drywall/wood applications Available accessory items Replaceable black non-marring rubber bumper Finishes - Brass Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628* Description Satin aluminum G Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Miscellaneous hardware BHMA 605 606 612 613 619 622 625 626 --- Base diameter: 2-1/4" Base projection: 3-11/16" Engaged projection: 5-3/4" Strike height: 1-1/2" Strike width: 13/16" Strike projection: 13/16" F Exterior hardware Dimensions Made from cast brass or aluminum Stops WS445 Meets ANSI/BHMA 156.16, L11351 for brass WS449 Meets ANSI/BHMA 156.16, L11341 for brass and L31341 for aluminum E13 Certifications Material substrate Latches, catches & bolts Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze C BHMA 605 606 612 613 619 622 625 626 --- Flush bolts & coordinators Finishes - Brass B Dimensions Made from cast brass Pulls &plates Material substrate Available accessory items WS445 A Hinges & pivots WS443 Wall stop - masonry WS447 Wall stop - drywall/wood For other colors, consult factory. *Only available on WS449. Ives Architectural hardware products E13 Automatic wall holders Hinges & pivots WS40 Automatic wall holder A Holder is mounted on wall and strike is mounted on door Roller on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the sound and shock Packed with fasteners for light duty masonry and drywall/wood applications Certifications Pulls &plates Meets ANSI/BHMA 156.16, L11291 for brass, and L31291 for aluminum Material substrate Dimensions Made from cast brass or aluminum B Available accessory items Security pin screw Hook package Finishes - Brass C Flush bolts & coordinators BHMA 605 606 612 613 625 626 Substrate Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US26 US26D Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum Latches, catches & bolts For other colors, consult factory. D WS45 Automatic wall holder - drywall/wood WS45X Automatic wall holder - masonry Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position A heavy rubber pad cushions the shock and absorbs the sound With unit mounted on door and the strike on wall, vertical adjustment is available on body The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date. WS45 is packed with fasteners for drywall/wood applications. WS45X is packed with fasteners for heavy duty masonry applications WS45 Certifications WS45 Meets ANSI/BHMA 156.16, L11291 for brass and L31291 for aluminum WS45X Meets ANSI/BHMA 156.16, L11291 for brass and L31291 for aluminum Material substrate Dimensions Made from cast brass or aluminum Available accessory items Exterior hardware Stops E14 Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Base height: 2" Base width: 2-1/2" Base projection: 2-1/4" Engaged projection: 3-1/2" Strike height: 2-1/16" Strike width: 3/4" Strike projection: 2" F Security pin screw Hook package Finishes - Brass G Miscellaneous hardware BHMA 605 606 612 613 619 622 625 626 --- Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Base height: 3-11/16" Base width: 3" Base projection: 2" Engaged projection: 3-7/16" Strike diameter: 2-3/8" Strike projection: 3" Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 E14 Description Satin aluminum For other colors, consult factory. Ives Architectural hardware products Kick down holders Meets ANSI/BHMA 156.16, L11383 for brass and L31383 for aluminum B Dimensions Made from cast brass or aluminum FS452-4 Door-to-floor clearance: 2" or less FS452-5 Door-to-floor clearance: up to 3" FS452-4 Plate height: 2-1/8” FS452-5 Plate height: 2-1/8" FS452-4 Plate width: 1" FS452-5 Plate width: 1" Replaceable black non-marring rubber shoes Finishes - Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Finish US28 Finishes - Aluminum BHMA 628 Description Satin aluminum For other colors, consult factory. *Available in 4" only. D Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Latches, catches & bolts Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze C BHMA 605 606 612 613 619 622 625 626 --- Flush bolts & coordinators Material substrate Available accessory items Pulls &plates Certifications A Units provide simple hold and release, activated with a touch of the foot Stainless steel spring Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications FS452-4 has a door-to-floor clearance of 2" or less FS452-5 has a door-to-floor clearance up to 3" Hinges & pivots FS452 Kick down holder Stops E15 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E15 Kick down holders Hinges & pivots FS455 4" Kick down holder A Units provide simple hold and release, activated with a touch of the foot. Stainless steel spring Replaceable black non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications Door-to-floor clearances of 2" or less Certifications B Pulls &plates Meets ANSI/BHMA 156.16, L11382 for brass and L31382 for aluminum Material substrate Dimensions Made from cast brass or aluminum Door-to-floor clearance: 2" or less Plate height: 1-3/4" Plate width: 1-3/4" Available accessory items Replaceable black non-marring rubber shoes Flush bolts & coordinators Finishes - Brass Latches, catches & bolts C BHMA 605 606 612 613 619 622 625 626 --- Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US15 BLK US26 US26D 643e/716 Substrate Aluminum Aluminum Aluminum Aluminum Aluminum Finish US28 US3AL US5AL US10AL US27 Finishes - Aluminum D BHMA 628 666 --668 --- Description Satin aluminum Bright brass Blackened brass Satin bronze Clear satin aluminum For other colors, consult factory. E16 FS544 4" Kick down holder FS555 5" Kick down holder F Exterior hardware Stops Units provide an economical method to hold open doors. Stainless steel spring Replaceable grey non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw Shoes are easily replaced when worn Packed with fasteners for wood applications FS544 for door-to-floor clearances of 2" or less FS555 for door-to-floor clearances up to 3" FS544 Certifications Dimensions FS544 Meets ANSI/BHMA 156.16, L11381 FS555 Meets ANSI/BHMA 156.16, L11391 FS544 Door-to-floor clearance: 2" or less Plate height: 2-1/4" Plate width: 1-7/16" FS555 Door-to-floor clearance: up to 3" Plate height: 2-1/4" Plate width: 1-7/16" Material substrate Made from cast iron Available accessory items Miscellaneous hardware Replaceable grey non-marring rubber shoes Finishes G BHMA 706 691 689 695 --- E16 Description Brass painted Bronze painted Aluminum painted Dark bronze painted Matte black For other colors, consult factory. Ives Architectural hardware products Substrate Iron Iron Iron Iron Iron Finish SP4 SP10 SP28 SP313 BLK Plunger type door holders Height: 5-1/2" Width: 2" Depth: 1-1/4" Material substrate Made from cast aluminum B Dimensions Meets ANSI/BHMA 156.16, L11401 Pulls &plates Certifications A Provides a contemporary yet economical method of positive hold-open. Spring operated plunger activates with minimal pressure, releasing instantly with a light tap on the plat-form lever. Provides a 1-5/8" throw for all types of doors. Ribbed grey non-marring rubber shoe is securely fastened to unit with a screw and is easily replaced when worn Packed with fasteners for wood applications Hinges & pivots FS1153 Plunger type door holder Available accessory items Replaceable grey non-marring rubber shoes BHMA 628 Description Satin aluminum Substrate Aluminum Finish US28 For other colors, consult factory. C Flush bolts & coordinators Finishes - Aluminum FS1154 Plunger type door holder Dimensions Meets ANSI/BHMA 156.16, L31401 Height: 6-1/4" Width: 1-1/2" Depth: 1-7/16" Material substrate Made from cast brass D Certifications Latches, catches & bolts Plunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors. Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever. Round non-marring rubber shoe is securely fastened with a screw in flanged cup to prevent movement or loss. When worn, shoes are easily replaced. Packed with fasteners for wood applications. Stops E17 Available accessory items Replaceable grey non-marring rubber shoes Finishes Substrate Brass Brass Brass Brass Brass Brass Finish US3 US4 US10 US10B US26 US26D For other colors, consult factory. F Description Bright brass Satin brass Satin bronze Oil rubbed bronze Bright chrome Satin chrome Exterior hardware BHMA 605 606 612 613 625 626 G Miscellaneous hardware Ives Architectural hardware products E17 Roller bumpers A Hinges & pivots RB470 Offset roller bumper RB471 4-1/2" Roller bumper RB472 6" Roller bumpers RB470 Offset roller bumper. Used where two doors open against each other to prevent damage to the doors or hardware RB471 and RB472 Straight roller bumpers. Ideal for use in situations where doors meet each other at approximate right angles (back to back) Grey rubber roller Packed with fasteners for wood applications RB470 B Pulls &plates Certifications B Offset Material substrate Dimensions Made from cast brass A items Available accessory Replaceable grey non-marring rubber shoes C Flush bolts & coordinators A RB470 Meets ANSI/BHMA 156.16, L12212 RB471 Meets ANSI/BHMA 156.16, L12192 RB472 Meets ANSI/BHMA 156.16, L12202 Finishes BHMA 605 606** 612* 613* 619* 625 626 D Latches, catches & bolts RB471 B A Stops Miscellaneous hardware F Exterior hardware RB472 A G A E18 Ives Architectural hardware products Substrate Brass Brass Brass Brass Brass Brass Brass For other colors, consult factory. *Only available on RB472. **Only available on RB471 and RB472. A A E18 A B Description Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome RB470 Base size: 1-11/16" x 2-1/4" RB470 Arm offset: 2-3/4" RB470 Length: 5" RB471 Base diameter: 2" RB471 Length: 4-1/2" RB472 Base diameter: 2" RB472 Length: 6" A Finish US3 US4 US10 US10B US15 US26 US26D Residential door stops A Hinges & pivots 060 3" Flexible door stops 061 4" Flexible door stops Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Packed disassembled for quick installation White rubber tip Packed with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16 Available accessory items Replaceable white rubber tip available Base diameter: 1" Tip diameter: 19/16" 060 3" Projection 061 4" Projection B Dimensions Made from steel Pulls &plates Material substrate Finishes Finish F-BLK F3 F5 F10 F10B F14 F-643E/716 F15 F26 F26D F-W For other colors, consult factory. **Only available on 061. D Latches, catches & bolts Substrate Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel C Description Matte black Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Aged bronze Satin nickel Bright chrome Satin chrome White Flush bolts & coordinators BHMA 631 632 638 639 640 645 --646 651 652 ---** Stops E19 F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E19 60 3-3/4" Base door stops 61 3-1/8" Base door stops Aluminum and brass substrate Simple to install - only a screwdriver required Packed disassembled for quick installation Available in three sizes to accommodate varying areas of installation and door trim dimensions White rubber tip. Note: 61A - 643E/716 ships with black rubber tips Welded fastener for wood applications Material substrate Dimensions Made from brass, aluminum, or zinc 60 3-3/4" Projection, base diameter: 1", Tip diameter: 5/8" 61 Brass and alum 3-1/8" projection, base Diameter: 7/8", tip diameter: 5/8" 61 Zinc 2-7/8" projection, base diameter: 1", tip diameter: 5/8" Available accessory items B Pulls &plates A Hinges & pivots Residential door stops Zinc substrate Replaceable white rubber tip available Replaceable black rubber tip available Finishes - Brass Latches, catches & bolts C Flush bolts & coordinators BHMA 605 606 609 612 613 619 620* 622 625 626 --- Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Blackened nickel Matte black Bright chrome Satin chrome Aged bronze Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish B3 B4 B5 B10 B10B B15 B15A B-BLK B26 B26D B-643e/716 Description Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Bright Chrome Satin Chrome Aluminum clear coat Aged bronze Matte black White Substrate Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Finish A3 A5 A10 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W Description Satin nickel Aged bronze Substrate Zinc Zinc Finish Z619 Z-643e/716 Finishes - Aluminum Stops E20 D BHMA 666 ---* 668* 703 669 670 672 702 673 -------* Finishes - Zinc Exterior hardware BHMA ---* ---* G Miscellaneous hardware F For other colors, consult factory. *Only available on 61. E20 Ives Architectural hardware products Residential door stops Utilizes heavy gauge spring to maintain rigid protections Simple to install - only a screwdriver required Packed disassembled for quick installation White rubber tip Packaged with fastener for wood applications A Hinges & pivots 63 Flexible door stops Dimensions Made from wrought steel Base diameter: 1" Tip diameter: 9/16" Projection: 3" Available accessory items B Replaceable white rubber tip available Replaceable black rubber tip available Finishes Substrate Steel Steel Steel Steel Steel Steel Steel Steel Finish F-BLK F3 F5 F-643E/716 F15 F26 F26D F-W For other colors, consult factory. Base door stop features deluxe one-piece styling Easily screws into base Designed with hexagonal head to accommodate wrench or pliers when installing White rubber tip Packaged with fastener for wood applications Material substrate Dimensions Made from solid brass or aluminum Base diameter: 1" Tip diameter: 9/16" Projection: 3-1/4" Available accessory items Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Finish B3 B4 B5 B10 B10B B15 B-BLK B26 B26D B-643e/716 Substrate Aluminum Aluminum Aluminum Finish A3 A10B A92 F Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Exterior hardware BHMA 605 606 609 612 613 619 622 625 626 --- Stops Finishes - Brass E21 Replaceable white rubber tip available Replaceable black rubber tip available D Latches, catches & bolts 64 Base door stop C Description Matte black Bright brass Blackened brass Aged bronze Satin nickel Bright chrome Satin chrome White Flush bolts & coordinators BHMA 631 632 638 --646 651 652 --- Pulls &plates Material substrate Finishes - Aluminum Description Bright brass Oil rubbed bronze Aluminum clear coat For other colors, consult factory. G Miscellaneous hardware BHMA 666 703 673 Ives Architectural hardware products E21 Residential door stops Hinges & pivots 69 Hinge pin door stops Pulls &plates A Economical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable Adjustable for 70° to 100° Door Openings Positive slip proof adjustment White non-marring rubber tips Removable bushings accommodate 1/4” to 5/16” diameter hinge pins Easy installation—only a screwdriver required Material substrate Dimensions Made from burnished wrought steel Base diameter: 1" Tip diameter: 9/16" Projection: 3-1/4" B Available accessory items Replaceable white rubber tip available Finishes C Flush bolts & coordinators BHMA 631 632 638 639 640 645 --646 647 651 652 Description Matte black Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Aged bronze Satin nickel Bright nickel Bright chrome Satin chrome G Miscellaneous hardware F Exterior hardware Stops E22 D Latches, catches & bolts For other colors, consult factory. E22 Ives Architectural hardware products Substrate Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Finish F-BLK F3 F5 F10 F10B F14 F-643E/716 F15 F15A F26 F26D Residential door stops Material substrate Available accessory items Made from brass, aluminum, or zinc Replaceable white rubber tip available B Finishes - Brass Substrate Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Finish A3 A4 A5 A10 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W Description Dark bronze Aged bronze Substrate Zinc Zinc Finish Z406E Z-643e/716 Finishes - Zinc BHMA ----- Stops BHMA 666 667 --668 703 669 670 672 702 673 ------- E23 Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Bright Chrome Satin Chrome Aluminum clear coat Aged bronze Matte black White Finishes - Aluminum D Finish B3 B4 B5 B10 B10B B15 B-BLK B26 B26D B-643e/716 Latches, catches & bolts Substrate Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass C Description Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Flush bolts & coordinators Brass and zinc substrate BHMA 605 606 609 612 613 619 622 625 626 --- Pulls &plates Aluminum substrate A Economical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable Designed for narrow trim installation High quality rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4" to 5/16" diameter hinge pins Easy installation White rubber and nylon tips (Note: 70A - 716 ships with black rubber tips) Hinges & pivots 70 Hinge pin door stops For other colors, consult factory. F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products E23 Residential door stops Hinges & pivots 72 Hinge pin door stops B Pulls &plates A Economical solution for use on low frequency, light weight, residential 3 1/2 or 4" hinged doors where the installation of a standard door stop or overhead is not desirable 85° to 125° Door opening adjustments Designed for narrow trim installation White rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4” to 5/16” diameter hinge pins Easy installation Material substrate Dimensions Made from cast zinc Post length: 1 7/8" Available accessory items Replaceable white rubber tip available Finishes C Flush bolts & coordinators BHMA 676 677 --704 --681 682 ----- Description Matte black Bright brass Blackened brass Oil rubbed bronze Satin nickel Bright chrome Satin chrome Aged bronze White Substrate Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Finish Z-BLK Z-605E Z-609E Z-613E Z-619E Z-625E Z-626E Z-643e/716 Z-W D Latches, catches & bolts For other colors, consult factory. 73 Hinge pin door stops Stops E24 Economical solution for use on low frequency, 4 1/2" hinges or above hinged doors where the installation of a standard door stop or overhead is not desirable 85° to 125° Door opening adjustments Designed for narrow trim installation White rubber bumpers - shoulder on stud supports rubber through entire body for engineered cushioning Removable bushings accommodate 1/4" to 5/16" diameter hinge pins Easy installation Material substrate Available accessory items Made from cast zinc Replaceable white rubber tip available Finishes F Exterior hardware BHMA 677 704 --681 Description Bright brass Oil rubbed bronze Satin nickel Bright chrome G Miscellaneous hardware For other colors, consult factory. E24 Ives Architectural hardware products Substrate Zinc Zinc Zinc Zinc Finish Z-605E Z-613E Z-619E Z-625E Door silencers Diameter: 1/2" Thickness: 1/8" (projection from frame when inserted) Material substrate Made from 60 Durometer styrene butadiene rubber B Dimensions Meets ANSI/BHMA 156.16, L03011 Pulls &plates Certifications A For use on metal frames featuring pneumatic design that, once installed,forms an air pocket to absorb shock and reduce noise of door closing Tamper-proof once installed on the frame Proper installation also eliminates door rattle and provides constant tension for door latches or locks Packed in bags of 100 Grey also available in bulk pack of 2500 Each bag has an installation tool included Hinges & pivots SR64 Door silencer - metal Finishes Description Grey Substrate Rubber Finish GRY For other colors, consult factory. C Flush bolts & coordinators BHMA --- SR65 Door silencer - wood D Certifications Dimensions Meets ANSI/BHMA 156.16, L03021 Height: 3/4" Width: 3/8" Thickness: 1/8" (projection from frame when inserted) Material substrate Made from 60 Durometer styrene butadiene rubber Latches, catches & bolts For use on wood frames, also feature pneumatic design to cushion shock and absorb noise To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in the detail Packed in bags of 100 Finishes Substrate Rubber Finish GRY For other colors, consult factory. Stops Description Grey E25 BHMA --- SR66 Door silencer - adhesive F Certifications Dimensions Meets ANSI/BHMA 156.16, L03021 Diameter: 1/2" Thickness: 1/8" (projection from frame when inserted) Material substrate Finishes Description Brown Grey White Substrate Rubber Rubber Rubber Finish BRN GRY WHT For other colors, consult factory. Ives Architectural hardware products G BHMA ------- Miscellaneous hardware Made from 60 Durometer styrene butadiene rubber Exterior hardware Self adhesive rubber silencers Economical installation requires no drilling of frames Packed two sheets of 50 (100 minimum) E25 Crash stop Hinges & pivots CS115 Crash stop A Specially designed for full-size exterior doors Tear resistant, grey vinyl cover Heavy duty compression spring assembled to both ends of chain and end brackets Packed with sheet metal screw. Cast brass brackets with solid, welded steel chain Optional sex bolt mounting available in US26D (626) only Dimensions B Pulls &plates Bracket size: 1-9/16" x 1-9/16" Available lengths: 20-1/2" - Recommended for 30" door width (product no. CS115-20) 25-1/2" - Recommended for 36" door width (product no. CS115-25) 30-1/2" - Recommended for 42" door width (product no. CS115-30) Available accessory items Flush bolts & coordinators Through bolt mounting available in US26D (626) only. Through bolt with cap nut mounting available in US26D (626) only Finishes G Miscellaneous hardware F Exterior hardware Stops E26 D Latches, catches & bolts C BHMA 613 626 E26 Ives Architectural hardware products Description Oil rubbed bronze Satin chrome Substrate Brass Brass Finish B10B B26D Exterior hardware Hinges & pivots Table of contents A Lock guards LG1 Lock guard with security pin............................................................................................. F2 LG7 Lock guard............................................................................................................................ F2 LG10 Lock guard.......................................................................................................................... F2 LG11 Lock guard - aluminum doors......................................................................................... F3 LG12 Lock guard - narrow.......................................................................................................... F3 LG13 Lock guard..........................................................................................................................F4 LG14 Lock guard - with electric strike.....................................................................................F4 Pulls &plates Viewers B U696 One-way viewer - UL.................................................................................................... F5 698 One-way wide angle viewer ............................................................................................ F5 U698 One-way wide angle viewer - UL................................................................................. F5 700 One-way narrow viewer ...................................................................................................F6 U700 One-way narrow viewer - UL .......................................................................................F6 701 One-way narrow viewer for thicker doors .....................................................................F6 U701 One-way narrow viewer for thicker doors - UL .......................................................F6 Flush bolts & coordinators Door knockers C 02-3125 Knocker only ............................................................................................................... F7 02-31251 Knocker with 700 viewer ........................................................................................ F7 02-31251U Knocker with U700 viewer .................................................................................. F7 02-31252 Knocker with 701 viewer ......................................................................................... F7 02-31252U Knocker with U701 viewer ................................................................................... F7 Mail slots D Latches, catches & bolts 620 Magazine size letter box plate with standard (open) back plate .........................F8 601 Sleeve for use with letter box plate .................................................................F8 E Stops F1 Exterior hardware G Miscellaneous hardware Ives Architectural hardware products F1 Lock guards A Hinges & pivots LG1 Lock guard with security pin LG7 Lock guard B Pulls &plates LG1 incorporates security frame pin to prevent separation of the door and frame LG7 does not incorporate the security frame pin Ideal for use with mortise or cylindrical locks Unit covers the latch bolt area of the door and lock, thereby providing added protection from burglars, vandals or normal abuse Non-handed Easy installation Through bolted with carriage bolts and nuts Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel(LG1 only) or brass (LG1 only) 3" wide x 11-1/2" high Bolt center to center: 10-1/2" Flush bolts & coordinators Finishes - Steel BHMA Description Substrate Finish 600* 603* 695* Primed for paint Zinc plated Dark bronze painted Steel Steel Steel USP US2G SP313 BHMA Description Substrate Finish 606* 612* Satin brass Satin bronze Brass Brass US4 US10 C Finishes - Brass Latches, catches & bolts Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D D For other colors, consult factory. *Not available on LG7.. LG10 Lock guard E Stops Ideally suited for use with rose or escutcheon 2-3/4" wide or less For use with type 86 mortise and type 161 cylindrical locks (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000) Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel 2-1/2" wide x 9-1/2" high Stud center to center: 8-1/2" Available accessory items Exterior hardware Security pin fasteners F2 Finishes - Steel BHMA Description Substrate Finish 600 Primed for paint Steel USP Miscellaneous hardware Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D G For other colors, consult factory. F2 Ives Architectural hardware products Lock guards 3" wide x 9-1/2" high Stud center to center: 8-1/2" Available accessory items Security pin fasteners B Dimensions Made from 13 gauge stainless steel, 12 gauge steel Pulls &plates Material substrate A Designed for use on aluminum doors with latch-type locks or doors equipped with electric strikes Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point Unit is handed - Specify left or right hand when ordering. Order RH for LHR door, and LH for RHR door. 2 welded mounting studs. No exposed fasteners on face of unit Hinges & pivots LG11 Lock guard - aluminum doors Finishes - Steel Description Substrate Finish 695 Dark bronze painted Steel SP313 Finishes - Stainless Description Substrate Finish 630 Satin stainless Stainless steel US32D For other colors, consult factory. 1-1/2" wide x 9-1/2" high Stud center to center: 8-1/2" Available accessory items E Dimensions Made from 13 gauge stainless steel, 12 gauge steel Stops Material substrate D Narrow design unit for use on rose or escutcheon 3-1/2" or less For use with type 86 mortise and type 161 cylinder locks (ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000) Unique design provides maximum security, virtually eliminating the opening between door and frame at the latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Latches, catches & bolts LG12 Lock guard - narrow C BHMA Flush bolts & coordinators RH (LHR) shown BHMA Security pin fasteners Finishes - Steel BHMA Description Substrate Finish 600 Primed for paint Steel USP Description Substrate Finish 630 Satin stainless Stainless steel US32D For other colors, consult factory. F3 BHMA Exterior hardware Finishes - Stainless G Miscellaneous hardware Ives Architectural hardware products F3 Lock guards Hinges & pivots LG13 Lock guard Pulls &plates A Designed for use on all type 161 cylindrical locks (ANSI 156.2 Series 2000) Monolock and Unilock Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point Non-handed 2 welded mounting studs. No exposed fasteners on face of unit Material substrate Dimensions Made from 13 gauge stainless steel, 12 gauge steel 1-1/2" wide x 7" high Stud center to center: 4-1/2" B Available accessory items Security pin fasteners Flush bolts & coordinators Finishes - Steel BHMA Description Substrate Finish 600 Primed for paint Steel USP C Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D Latches, catches & bolts For other colors, consult factory. D LG14 Lock guard - with electric strike Narrow design unit for use on rose or escutcheon 3-1/2" or less. For use with Von Duprin 6210 and 6211 electric strike. No exposed fasteners on face of unit. Unique design provides maximum security, virtually eliminating the opening between door and frame at latch point. Non-handed 4 welded mounting studs. No exposed fasteners on face of unit E Stops Material substrate Dimensions Made from 13 gauge stainless steel 2-9/16" wide x 9-1/2" high Stud center to center: 8-1/2" and 6-3/4" Available accessory items Security pin fasteners Exterior hardware Finishes - Stainless BHMA Description Substrate Finish 630 Satin stainless Stainless steel US32D G Miscellaneous hardware F4 For other colors, consult factory. F4 Ives Architectural hardware products Viewers 150° angle of view For doors 1-3/8" to 2-1/16" thick Secure, tamper-resistant one-way thread installation Simple installation — only a 1/2" hole required Suggested installation height: 60" from floor A Hinges & pivots U696 One-way viewer - UL Material substrate Dimensions Meets ANSI/BHMA A156.16, L23222 UL listed 90 minute fire doors External diameter: 3/4" Pulls &plates Available accessory items B Trim washer available, 3/4" x .032" thick. Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Finishes Substrate Finish Satin brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B4 B10B B15 B-BLK B26 B26D B-643e/716 For other colors, consult factory. Latches, catches & bolts D 698 One-way wide angle viewer U698 One-way wide angle viewer - UL C Description 606 613 619 622 625 626 --- Flush bolts & coordinators BHMA 190° angle of view 4 optical glass lenses For doors 1-3/8" to 2-1/8" thick Simple installation — only a 9/16" hole required Suggested installation height: 60" from floor External diameter: 1" Lens projects 1/4" from face of door Available accessory items E Dimensions Meets ANSI/BHMA A156.16, L23222 U698 is UL listed 90 minute fire doors Stops Material substrate Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Finishes Substrate Finish 605 619* 622* 625* 626 --- Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B15 B-BLK B26 B26D B-643e/716 F5 Description Exterior hardware BHMA For other colors, consult factory. *Not available on 698. G Miscellaneous hardware Ives Architectural hardware products F5 Viewers A Hinges & pivots 700 One-way narrow viewer U700 One-way narrow viewer - UL B Pulls &plates 120° angle of view For doors 1-3/8" to 2-1/16" thick Secure, tamper-resistant one-way thread installation Simple installation—only a 1/2" hole required Suggested installation height: 60" from floor Certifications Available accessory items 700 meets ANSI/BHMA A156.16, L23173 U700 meets ANSI/BHMA A156.16, L23223 U700 is UL listed 90 minute fire doors Trim washer available, 3/4" x .032" thick. Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Material substrate Made from brass, glass lens External diameter: 5/8" Finishes C Flush bolts & coordinators Dimensions BHMA Description Substrate Finish 606 613* 619* 622* 625* 626* --- Satin brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B4 B10B B15 B-BLK B26 B26D B-643e/716 Latches, catches & bolts For other colors, consult factory. *Not available on 700. D 701 One-way narrow viewer for thicker doors U701 One-way narrow viewer for thicker doors - UL E Stops 120° angle of view For doors 2-1/8" to 2-5/8" thick Secure, tamper-resistant one-way thread installation Simple installation—only a 1/2" hole required Suggested installation height: 60" from floor Certifications Available accessory items 701 meets ANSI/BHMA A156.16, L23173 U701 meets ANSI/BHMA A156.16, L23223 U701 is UL listed 90 minute fire doors Trim washer available, 3/4" x .032" thick. Extensions available for thicker doors Privacy viewer covers to prevent viewing from outside the room Material substrate Made from brass, glass lens External diameter: 5/8" F6 Exterior hardware Finishes BHMA Description Substrate Finish 606 613* 619* 622* 625* 626* --- Satin brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B4 B10B B15 B-BLK B26 B26D B-643e/716 G Miscellaneous hardware For other colors, consult factory. *Not available on 700. F6 Ives Architectural hardware products Dimensions Door knockers Knocker only Knocker with 700 viewer Knocker with U700 viewer Knocker with 701 viewer Knocker with U701 viewer A Hinges & pivots 02-3125 02-31251 02-31251U 02-31252 02-31252U 02-31251 and 02-31251U for door thickness 7/8" – 1-9/16" 02-31252 and 02-31252U for door thickness 1-5/8" – 2-1/8" Bolts through door Certifications Dimensions Meets ANSI/BHMA A156.16, L23161 B Made from forged brass Pulls &plates Material substrate Length: 5-15/16" Width: 3" Projection: 1-1/16" Mounting hole center-to-center: 3-15/16" Finishes Substrate Finish Bright brass Blackened brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B3 B5 B15 B-BLK B26 B26D B-643e/716 C Description 605 609* 619 622 625 626 --- Flush bolts & coordinators BHMA For other colors, consult factory. *B5 knockers are not available with viewer. B3 is furnished with B4(606) viewer, 716 is furnished with B10B viewer, B15 (619) is furnished with a 626 viewer. D Latches, catches & bolts E Stops F7 Exterior hardware G Miscellaneous hardware Ives Architectural hardware products F7 Mail slots Hinges & pivots 620 Magazine size letter box plate with standard (open) back plate A Spring-loaded front plate Through bolt mounting available, order separately 09-355 – finish. Packed with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA A156.16, L26031 Overall size: 13" wide x 3-9/16" high Plate opening: 11" x 2" high Material substrate Made from brass or aluminum Flush bolts & coordinators B Pulls &plates Finishes - Brass BHMA Description Substrate Finish 605 609 619 622 625 626 --- Bright brass Blackened brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B3 B5 B15 B-BLK B26 B26D B-643e/716 C Finishes - Aluminum BHMA Description Substrate Finish 628 Clear anodized Aluminum PA28 Latches, catches & bolts For other colors, consult factory. 601 Sleeve for use with letter box plate G Miscellaneous hardware F8 Exterior hardware E Stops D F8 Ives Architectural hardware products For use on 1-3/4" hollow core doors. Prevents items falling into door 1/4" Wide strengthening rib for added durability Can be stacked thicker doors Material substrate Dimensions Made of stainless steel Overall size: 11 7/16" wide x 2 11/16" high x 1 3/4" deep Miscellaneous door hardware Hinges & pivots Table of contents A Brackets and hooks B Pulls &plates 059 Hand rail bracket................................................................................................................G2 59 Hand rail bracket...................................................................................................................G3 159 Hand rail bracket.................................................................................................................G3 405 Coat & hat hook.................................................................................................................G4 571 Coat & hat hook...................................................................................................................G4 572 Coat & hat hook..................................................................................................................G5 574 Coat & hat hook..................................................................................................................G5 575 Coat & hat hook..................................................................................................................G6 580 Ceiling hook.........................................................................................................................G6 581 Wardrobe hook.................................................................................................................... G7 582 Double wardrobe hook......................................................................................................G8 SP585 Closet pole sockets.......................................................................................................G9 SP586 Closet pole sockets.......................................................................................................G9 Decorative hooks C Flush bolts & coordinators 506 Plymouth coat & hat hook.............................................................................................G10 507 Rhodes coat & hat hook..................................................................................................G10 507B Rhodes wardrobe hook.................................................................................................G10 508 Greenwich coat & hat hook...........................................................................................G10 508C Greenwich coat & hat hook, concealed mount........................................................ G11 509C Tubular coat & hat hook, concealed mount............................................................. G11 510C Latitude coat & hat hook, concealed mount............................................................ G11 510BC Latitude wardrobe hook, concealed mount........................................................... G11 511BC Century wardrobe hook, concealed mount............................................................. G12 543 Camelot coat & hat hook................................................................................................ G12 543B Camelot wardrobe hook............................................................................................... G12 554 Century coat & hat hook................................................................................................. G13 558B Orbit wardrobe hook..................................................................................................... G13 559B Tubular wardrobe hook................................................................................................ G13 D Latches, catches & bolts Window hardware 07 Window lock......................................................................................................................... G14 90 Side window lock................................................................................................................ G14 026 Bar window lift.................................................................................................................. G15 066 Casement fastener.......................................................................................................... G15 66 Casement fastener............................................................................................................. G16 71 Casement adjuster............................................................................................................... G16 E Stops Rescue hardware 299RS Rescue strike - center..................................................................................................G17 299RB Rescue strike - offset...................................................................................................G17 299AS Emergency stop assembly - center......................................................................... G18 299AB Emergency stop assembly - offset......................................................................... G18 F Exterior hardware G1 Miscellaneous hardware Ives Architectural hardware products G1 Brackets and hooks Hinges & pivots 059 Hand rail bracket A Large faceplate for secure attachment to wall Features solid construction for increased strength Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L13061 for brass and L33061 for aluminum Brass substrate Pulls &plates Aluminum substrate Material substrate Dimensions Made from solid brass, cast aluminum, or zinc Bracket size: 1-9/16" x 1-9/16" C Flush bolts & coordinators B Finishes - Brass BHMA Description Substrate Finish 605 609 613 619 620 622 625 626 --- Bright brass Blackened brass Oil rubbed bronze Satin nickel Blackened nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B5 B10B B15 B15A B-BLK B26 B26D B-643e/716 D Latches, catches & bolts Finishes - Aluminum BHMA Description Substrate Finish 666 --668 703 669 670 672 702 673 ------- Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E E Stops Finishes - Zinc G2 Miscellaneous hardware F Exterior hardware For other colors, consult factory. G2 Ives Architectural hardware products Brackets and hooks Hinges & pivots 59 Hand rail bracket Brass substrate A Large faceplate for secure attachment to wall Features solid construction for increased strength Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16, L13061 for brass and L33061 for aluminum Aluminum base: 2-13/16" high x 1-7/16" wide Brass base: 2-15/16" high x 1-1/2" wide Base to center of rail: 2-3/4" Material substrate Finishes - Brass Description Substrate Finish 605 609 619 625 626 --- Bright brass Blackened brass Satin nickel Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B5 B15 B26 B26D B-643e/716 Finishes - Aluminum Substrate Finish Bright brass Blackened brass Oil rubbed bronze Bright nickel Satin nickel Aluminum clear coat Aged bronze Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10B A14 A15 A92 A-643e/716 For other colors, consult factory. D Latches, catches & bolts Description 666 --703 669 670 673 --- C BHMA Flush bolts & coordinators BHMA B Aluminum substrate Pulls &plates Made from cast brass or cast aluminum 159 Hand rail bracket For use on commercial applications Exceeds OSHA and BHMA strength test requirements Packed with fasteners for masonry and wood applications Base diameter: 3-1/8" Base to rail center: 3-1/8" Material substrate E Dimensions Meets ANSI/BHMA 156.16, L33081 Stops Certifications Made from cast aluminum Finishes - Aluminum Description Substrate Finish 666 673 Bright brass Aluminum clear coat Aluminum Aluminum US3AL US27 F For other colors, consult factory. Exterior hardware BHMA G3 Miscellaneous hardware Ives Architectural hardware products G3 Brackets and hooks Hinges & pivots 405 Coat & hat hook A Wide body design is ideal for public buildings, schools, dormitories, etc., where hook must withstand unusual stress and strain Certifications Meets ANSI/BHMA 156.16, L33113 Material substrate Dimensions Made from cast aluminum Base: 1-1/2" high x 7/8" wide Projection: 2-1/2" Flush bolts & coordinators B Pulls &plates Finishes - Aluminum Description Substrate Finish 666 667 --668 703 669 673 Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A4 A5 A10 A10B A14 A92 C For other colors, consult factory. 571 Coat & hat hook All-purpose hook in traditional design Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L13113 for brass and L33113 for aluminum Brass substrate D Latches, catches & bolts BHMA Material substrate Dimensions Made from cast brass and cast aluminum Base: 1-3/4" high x 1-3/16" wide Projection: 3" Finishes - Brass E Stops Aluminum substrate BHMA Description Substrate Finish 605 606 609 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10B B15 B-BLK B26 B26D B-643e/716 Miscellaneous hardware F Exterior hardware Finishes - Aluminum BHMA Description Substrate Finish 666 --668 669 670 672 702 673 ------- Bright brass Blackened brass Satin bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E G4 Finishes - Zinc For other colors, consult factory. G4 Ives Architectural hardware products Brackets and hooks A All-purpose hook in traditional design Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16, L13113 for brass and L33113 for aluminum Material substrate Dimensions Made from cast brass and cast aluminum Brass base: 1-1/2" high x 1-1/4" wide Projection: 3-1/8" Finishes - Brass Brass substrate Substrate Finish Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10 B10B B15 B26 B26D Description Substrate Finish 666 --668 703 669 670 673 Bright brass Blackened brass Satin bronze Oil rubbed bronze Bright nickel Satin nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A10B A14 A15 A92 For other colors, consult factory. D Latches, catches & bolts BHMA C Finishes - Aluminum Flush bolts & coordinators Description 605 606 609 612 613 619 625 626 B BHMA Pulls &plates Aluminum substrate Hinges & pivots 572 Coat & hat hook 574 Coat & hat hook Decorative design is ideal for commercial and residential installations Packaged with fasteners for wood applications Material substrate Made from cast brass and cast aluminum Base: 1-5/8" high x 1-3/4" wide Projection: 3-3/4" Overall height, brass: 4-3/4" Overall height, aluminum: 5" E Dimensions Meets ANSI/BHMA 156.16, L13113 for brass and L33113 for aluminum Stops Certifications Finishes - Brass Substrate Finish 605 606 612 613 619 625 626 Bright brass Satin brass Satin bronze Oil rubbed bronze Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass Brass Brass B3 B4 B10 B10B B15 B26 B26D F Description Exterior hardware BHMA Finishes - Aluminum Substrate Finish Bright brass Bright chrome Aluminum clear coat Aluminum Aluminum Aluminum A3 A26 A92 For other colors, consult factory. Ives Architectural hardware products G5 Description 666 627 673 Miscellaneous hardware BHMA G5 Brackets and hooks Hinges & pivots 575 Coat & hat hook A Especially designed to accommodate large hats Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16, L33121 Base: 2-1/4" high x 1-3/8" wide Projection: 3-5/8" Overall height: 5-3/4" Material substrate Made from cast aluminum B Pulls &plates Finishes - Aluminum BHMA Description Substrate Finish 666 703 673 Bright brass Oil rubbed bronze Aluminum clear coat Aluminum Aluminum Aluminum A3 A10B A92 Flush bolts & coordinators For other colors, consult factory. 580 Ceiling hook C Ideal for use in closets, attached to underside of shelves, or in storage lockers Packaged with fasteners for wood applications Material substrate Dimensions Made from cast aluminum Base: 1" high x 1-7/8" wide Projection: 2-1/4" D Latches, catches & bolts Finishes - Aluminum BHMA Description Substrate Finish 666 --668 669 670 672 702 673 ----- Bright brass Blackened brass Satin bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A14 A15 A26 A26D A92 A-643e/716 A-BLK G6 Miscellaneous hardware F Exterior hardware E Stops For other colors, consult factory. G6 Ives Architectural hardware products Brackets and hooks Material substrate A Compact hook is perfect where space is limited, such as behind doors where low profile is needed. Packaged with fasteners for wood applications Hinges & pivots 581 Wardrobe hook Made from cast brass, cast aluminum, or zinc Dimensions B Base, brass/aluminum: 1-1/4" high x 1-1/4" wide Base, zinc: 1-1/2" high x 3/4" wide Projection, brass: 1-11/16" Projection, Aluminum, zinc: 1-5/8" Pulls &plates Finishes - Brass Substrate Finish Bright brass Satin brass Blackened brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10B B15 B-BLK B26 B26D B-643e/716 Finishes - Aluminum Substrate Finish Bright brass Blackened brass Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E D Description 666 --669 670 672 702 673 ------- Latches, catches & bolts BHMA C Description 605 606 609 613 619 622 625 626 --- Flush bolts & coordinators BHMA Finishes - Zinc E Stops For other colors, consult factory. F Exterior hardware G7 Miscellaneous hardware Ives Architectural hardware products G7 Brackets and hooks Hinges & pivots 582 Double wardrobe hook A Compact double hook is perfect where space is limited, such as behind doors where low profile is needed Packaged with fasteners for wood applications Material substrate Made from cast brass, cast aluminum, or zinc Dimensions B Pulls &plates Base, brass: 1-1/8" high x 1-1/4" wide Base, aluminum: 1-1/16" high x 1-3/16 wide Base, zinc: 1-5/8" high x 7/8" wide Projection, brass: 1" Projection, aluminum, zinc: 1-3/32" C Flush bolts & coordinators Finishes - Brass BHMA Description Substrate Finish 605 606 609 612 613 619 622 625 626 --- Bright brass Satin brass Blackened brass Satin bronze Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass B3 B4 B5 B10 B10B B15 B-BLK B26 B26D B-643e/716 E Stops D Latches, catches & bolts Finishes - Aluminum BHMA Description Substrate Finish 666 --668 669 670 672 702 673 ------- Bright brass Blackened brass Satin bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W BHMA Description Substrate Finish --- Satin nickel Zinc Z619E Finishes - Zinc G8 Miscellaneous hardware F Exterior hardware For other colors, consult factory. G8 Ives Architectural hardware products Brackets and hooks Flange design prevents accidental knock out of pole Accommodates pole or pipe with outside diameter of 1-3/8" Packed in pairs Packaged with fasteners for wood applications A Hinges & pivots SP585 Closet pole sockets Material substrate Made from wrought steel Finishes Description Substrate Finish 632 Bright brass Steel F3 B Pulls &plates BHMA SP586 Closet pole sockets Single screw mounting Accommodates pole or pipe with outside diameter of 1-3/8" Packed in pairs Packaged with fasteners for wood applications C Material substrate Flush bolts & coordinators Made from a heavy duty plastic for long life and extra strength Finishes BHMA Description Substrate Finish ---* White Plastic P D Latches, catches & bolts *Only available in Slim-Pak of 25. E Stops F Exterior hardware G9 Miscellaneous hardware Ives Architectural hardware products G9 Decorative hooks Hinges & pivots 506 Plymouth coat & hat hook A Decorative design is ideal for all installations Design complements Plymouth Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications Certifications Dimensions Meets ANSI/BHMA 156.16 Material substrate Pulls &plates Made from brass Base: 2" high x 1/2" wide Projection: 2" Overall height: 5-1/4" Overall width: 4-3/4" B See finishes below 507 Rhodes coat & hat hook C Flush bolts & coordinators Decorative design is ideal for all installations Design complements Rhodes Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2- 5/16" high x 1/2" wide Projection: 3-1/2" Overall height: 4-1/2" Material substrate Made from brass See finishes below Latches, catches & bolts 507B Rhodes wardrobe hook D Decorative design is ideal for all installations Design complements Rhodes Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2- 5/16" high x 1/2" wide Projection: 1-15/16" Material substrate Made from brass Stops See finishes below E 508 Greenwich coat & hat hook Exterior hardware Decorative design is ideal for all installations Design complements Greenwich Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 1-1/2" wide Projection: 3-5/16" Overall height: 5-1/2" F Material substrate Made from brass See finishes below G10 Miscellaneous hardware 506, 507, 507B and 508 Finishes BHMA Description Substrate Finish 605 613 622 625 626 --- Bright brass Oil rubbed bronze Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass 605 613 BLK 625 626 643e/716 For other colors, consult factory. G10 Ives Architectural hardware products Decorative hooks Decorative design is ideal for all installations Design complements Greenwich Series pulls and levers Concealed mount - packaged with set screw Packaged with fasteners for wood/drywall applications A Hinges & pivots 508C Greenwich coat & hat hook, concealed mount Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 1-1/2" wide Projection: 3-11/16" Overall height: 5-1/2" Material substrate Pulls &plates Made from brass See finishes below B 509C Tubular coat & hat hook, concealed mount Decorative design is ideal for all installations Design complements Tubular Series pulls and levers Concealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications Dimensions Meets ANSI/BHMA 156.16 Base: 1-15/16" diameter Projection: 3-1/4" Overall height: 5-11/16" Material substrate Made from brass See finishes below Decorative design is ideal for all installations Design complements Latitude Series pulls and levers Concealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 1-15/16" diameter Projection: 3-3/4" Overall height: 5-11/16" Material substrate Made from cast brass D Latches, catches & bolts 510C Latitude coat & hat hook, concealed mount C Certifications Flush bolts & coordinators See finishes below E Stops 510BC Latitude wardrobe hook, concealed mount Decorative design is ideal for all installations Design complements Latitude Series pulls and levers Concealed mount - packaged with set screw and allen wrench Packaged with fasteners for wood/drywall applications Base: 1-15/16" diameter Projection: 3-1/4" Material substrate Made from cast brass See finishes below Description Substrate Finish 605 613 622 625 626 --- Bright brass Oil rubbed bronze Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass 605 613 BLK 625 626 643e/716 For other colors, consult factory. Ives Architectural hardware products G11 BHMA Miscellaneous hardware 508C, 509C, 510C and 510BC Finishes F Dimensions Meets ANSI/BHMA 156.16 Exterior hardware Certifications G11 Decorative hooks Hinges & pivots 511BC Century wardrobe hook, concealed mount A Decorative design is ideal for all installations Design complements Century Series Pulls and Levers Concealed mount Pre-installed fastener for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 1" high x 3/4" wide Projection: 1-1/2" Material substrate Pulls &plates Made from cast brass Flush bolts & coordinators B Finishes BHMA Description Substrate Finish 605 613 622 625 626 --- Bright brass Oil rubbed bronze Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass 605 613 BLK 625 626 643e/716 C For other colors, consult factory. 543 Camelot coat & hat hook D Latches, catches & bolts Decorative design is ideal for all installations Design complements Camelot Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 13/16" wide Projection: 2-1/2" Overall height: 5-1/2" Material substrate Made from stainless steel See finishes below 543B Camelot wardrobe hook E Stops Decorative design is ideal for all installations Design complements Camelot Series pulls and levers Surface mount Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" high x 13/16" wide Projection: 1-11/16" Material substrate Exterior hardware Made from stainless steel F See finishes below Miscellaneous hardware 543 and 543B Finishes BHMA Description Substrate Finish 629 630 Bright stainless Satin stainless Stainless steel Stainless steel US32 US32D G12 For other colors, consult factory. G12 Ives Architectural hardware products Decorative hooks Decorative design is ideal for all installations Design complements Century Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications A Hinges & pivots 554 Century coat & hat hook Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" Diameter Projection: 4-1/4" Overall height: 4-7/8" Material substrate Finishes Substrate Finish Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass 605 619 BLK 625 626 643e/716 For other colors, consult factory. C Flush bolts & coordinators Description 605 619 622 625 626 --- B BHMA Pulls &plates Made from cast brass 558B Orbit wardrobe hook Decorative design is ideal for all installations Design complements Orbit Series pulls and levers Concealed mount - packaged with set screw Packaged with fasteners for wood/drywall applications Dimensions Meets ANSI/BHMA 156.16 Base: 3-5/8" high x 3/4" wide Projection: 2-7/8" Material substrate Made from brass See finishes below D Certifications Latches, catches & bolts 559B Tubular wardrobe hook Decorative design is ideal for all installations Design complements Tubular Series pulls and levers Surface mount Packaged with fasteners for wood/drywall applications E Stops Certifications Dimensions Meets ANSI/BHMA 156.16 Base: 2" Diameter Projection: 1-5/16" Material substrate See finishes below F Exterior hardware Made from brass 558B and 559B Finishes Substrate Finish Bright brass Oil rubbed bronze Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass 605 613 619 BLK 625 626 643e/716 For other colors, consult factory. Ives Architectural hardware products G13 Description 605 613 619 622 625 626 --- Miscellaneous hardware BHMA G13 Window hardware Hinges & pivots 07 Window lock A Designed low to the sash for superior strength and greater resistance to breakage Vertical and horizontal camming action for snug, non-rattling fit Heavy gauge springs provide long-wearing action Packaged with fasteners for wood applications Certifications Dimensions Meets ANSI/BHMA 156.16, L33121 Base: 15/16" x 2-9/16" Strike: 5/8" x 2-9/16" Material substrate Pulls &plates Made from cast brass or aluminum Flush bolts & coordinators B Finishes - Brass BHMA Description Substrate Finish 605 619 622 625 626 --- Bright brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B15 B-BLK B26 B26D B-643e/716 D Latches, catches & bolts C Finishes - Aluminum BHMA Description Substrate Finish 666 ---* 703 669 670 672 702 673 ------- Bright brass Blackened brass Oil rubbed bronze Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10B A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W E Stops For other colors, consult factory. *Only available in Slim-Pak of 25. 90 Side window lock May be used singularly for small windows or in pairs for large windows Cam action eliminates rattles and holds window firmly in desired position Packaged with fasteners for wood applications Exterior hardware Certifications F Meets ANSI/BHMA 156.16 Material substrate Dimensions Made from aluminum 1-3/4" high x 1-1/8" wide Finishes - Aluminum BHMA Description Substrate Finish 666 Bright brass Aluminum A3 G14 Miscellaneous hardware For other colors, consult factory. G14 Ives Architectural hardware products Window hardware Hinges & pivots 026 Bar window lift A Facilitates opening of window in a safe manner Can also be used as a drawer or utility pull Packaged with fasteners for wood applications Certifications Meets ANSI/BHMA 156.16 Dimensions Made from solid brass or aluminum Base: 1-1/8" high x 4" wide Projection: 1-1/16" Finishes - Brass Substrate Finish Bright brass Blackened brass Satin nickel Matte black Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass Brass B3 B5 B15 B-BLK B26 B26D B-643e/716 Finishes - Aluminum Finish 666 --669 670 672 702 673 ------- Bright brass Blackened brass Bright nickel Satin nickel Bright chrome Satin chrome Aluminum clear coat Aged bronze Matte black White Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A15 A26 A26D A92 A-643e/716 A-BLK A-W For other colors, consult factory. D Substrate Latches, catches & bolts Description C BHMA Flush bolts & coordinators Description 605 609 619 622 625 626 --- B BHMA Pulls &plates Material substrate 066 Casement fastener E For use on windows to provide weather-tight fastening and security Also ideal for securing louvered doors and small doors Packaged with three strikes: Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) Packaged with fasteners for wood applications Stops Certifications Meets ANSI/BHMA 156.16 Rim Strike (RS) Mortise Strike (MS) Dimensions Made from solid brass or aluminum Base: 1-5/8" x 7/8" Projection: 1-3/8" Finishes - Brass Description Substrate Finish 605 609 619 625 626 Bright brass Blackened brass Satin nickel Bright chrome Satin chrome Brass Brass Brass Brass Brass B3 B5 B15 B26 B26D Description Substrate Finish 666 --703 669 673 Bright brass Blackened brass Oil rubbed bronze Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum Aluminum A3 A5 A10B A14 A92 G15 BHMA Miscellaneous hardware Finishes - Aluminum F BHMA Exterior hardware Surface Strike (SS) Material substrate For other colors, consult factory. Ives Architectural hardware products G15 Window hardware Hinges & pivots 66 Casement fastener A For use on windows to provide weather-tight fastening and security Also ideal for securing louvered doors and small doors Packaged with three strikes: Surface Strike (SS), Rim Strike (RS), or Mortise Strike (MS) Packaged with fasteners for wood applications Certifications Surface Strike (SS) Rim Strike (RS) Mortise Strike (MS) Flush bolts & coordinators B Pulls &plates Meets ANSI/BHMA 156.16 Material substrate Dimensions Made from solid brass or aluminum Base: 2-1/16" high x 1-1/16" wide Projection: 1-7/8" Finishes - Brass BHMA Description Substrate Finish 605 609 619 625 626 --- Bright brass Blackened brass Satin nickel Bright chrome Satin chrome Aged bronze Brass Brass Brass Brass Brass Brass B3 B5 B15 B26 B26D B-643e/716 C Finishes - Aluminum BHMA Description Substrate Finish 666 --669 673 Bright brass Blackened brass Bright nickel Aluminum clear coat Aluminum Aluminum Aluminum Aluminum A3 A5 A14 A92 D Latches, catches & bolts For other colors, consult factory. 71 Casement adjuster Securely holds casement window in any position. Can also be used to hold cabinet lids and drafting table tops in various positions. Available in 10" and 12" lengths. Packaged with fasteners for wood applications Certifications E Stops Meets ANSI/BHMA 156.16 Material substrate Made from solid brass Dimensions Tube: 3/8" x 5/8" Projection: 1" F Exterior hardware Sash plate: Brass: 1-5/8" high x 5/8" wide Steel: 2 x 5/8" wide Sill plate: 2-1/4" x 15/16" wide G16 Miscellaneous hardware Finishes G16 Ives Architectural hardware products BHMA Description Substrate Finish 605 625 Bright brass Bright chrome Brass Brass B3 B26 Rescue hardware A Hinges & pivots 299AL Emergency Stop 299RB Rescue strike - offset 299RS Rescue strike - center 299AB Emergency stop assembly - offset 299AS Emergency stop assembly - center Used in conjunction with center hung pivots, rescue hardware allows a bi-directional door swing in emergency situations. When a patient becomes trapped behind an inward swinging door, the center tong of the emergency stop depresses allowing the door to swing in the opposite direction without causing damage to the frame. Pulls &plates Center or offset mounting styles 7 model fits 5-3/4" frame and -8 model fits 6-3/4" frames Fits 1 3/4" door thickness. Custom sizes available, consult factory Must be used with center hung pivots such as Ives models: 7253, 7255, 7255J, 7256, and 7259 Cannot be used with deadbolt applications Cannot be used with mortise locks that have deadlocking auxiliary latches Packed with 8-32 x 1/2" fasteners for hollow metal applications 7 model: 6.75" x 2.75" Used with 5 3/4" Frame 8 model: 7.75" x 2.75 " Used with 6 3/4" Frame Emergency stop only: 1.625" x 4.5" Material substrate Stainless Steel C Dimensions Meets ANSI/BHMA A1882 Flush bolts & coordinators Certifications B Finishes Description Substrate Finish 630 Stainless steel Stainless 630 Latches, catches & bolts BHMA For other colors, consult factory. Fig. 1 How it works Fig. 2 Fig. 3 D Door Door Normal travel Emergency travel Emergency stop Door Emergency travel Push lever to retract Things to consider when ordering E Stops Rescue hardware must consist of two components: a stop and a strike. The components can be ordered as two separate items (with one component mounted above the other on the frame), or as one assembly with integrated components. Separate components Integrated components Emergency stop only Rescue strike only (available in -7 or -8 model) Center 299RS 299AL (required to complete assembly) Exterior hardware .134 (3.40) F 1.625 (41.28) Emergency stop assemblies (available in -7 or -8 model) Center 299AS 1.000 (25.40) 1.250 (31.75) + 2.563 (65.09) Offset 299AB G17 4.500 (114.30) 3.250 (82.55) Miscellaneous hardware Offset 299RB Note: Refer to templates for dimensional details. Ives Architectural hardware products G17 A Hinges & pivots Index by product description A H R Angle stop, D11 Automatic wall holder, E15 Auxiliary pusher, D12 Handrail bracket, G2-G3 Hinge pin stop, E22-E24 Hinges 3 knuckle, full mortise, A5-A8 5 knuckle, full mortise, A10-A15 continuous geared full mortise, A23-A26, A31-A33, A36, A37 full surface, A34, A35 half surface, A27-A30 continuous pin & barrel full mortise, A43, A44, A46, A49, A50 full surface, A45 swing clear, A47, A48 pocket, A72, A73 residential, A16 spring, A9 Hook ceiling, G6 coat & hat, G4-G6, G10-G13 wardrobe, G8, G10-G13 Rescue hardware , G17, G18 Riser , E2, E3 Roller bumper , E18 Roller catch , D15 Roller latch D8-D10 B C Carry bar, C14 Casement adjuster, G16 Casement fastener, G15, G16 Chain door guard, D7 Closet pole socket, G9 Constant latching flush bolt, C5 Coordinator bar, C19 filler bar, C20 gravity, C23 mounting bracket, C21-C22 Crash stop, E26 K E P Elbow catch, D17 Pivot 1 1/2" offset, A61, A62 3/4" offset, A54-A60 center hung, A67-A71 intermediate, A63-A65 electrified, A66 pocket, A72 electrified, A73 Plunger door holder, E17 Pocket sliding door bolt, B63 Protection plates, B47 Pull architectural, B11-B17 decorative, B23-B37 Pull plate, B41-B45 Push bar , B18 with pull , B19-B22 Push plate , B41 Flexible door stop, E19, E21 Floor stop, E2-E6 & automatic holder, E7 & manual holder, E8 & semi-automatic holder, E7 Flush bolts automatic, C2-C5 constant latching, C6-C9 manual, C10-C15 Flush pull, B57-B59 decorative, B60-B62 E Stops Door base stop, E20, E21 Door bolt dutch, D6 mortise, D6 Door guard chain, D7 solid bar, D7 Door knocker, F7 Door pull, B2, B3, B4, B5 offset, B5 Door silencer, E25 Dust proof strike, C16 F F I Invisible latch, D12 D Exterior hardware D Latches, catches & bolts C Flush bolts & coordinators B Pulls & plates Ball catch, D13 adjustable, D16 dual adjustable, D16, D17 G Miscellaneous hardware G 242 Ives Architectural hardware products Kick down holder, E15, E16 L Lock guard, F2-F4 Long door pull, B38, B39 M Magnetic catch, D14 Mail slots, F8 N S Screen door pull, B65 Side window lock, G7 Slide door edge pull, B63 Sliding door pull, B64, B65 Strike plate, D10 Surface bolt, D2-D5 V Vandal resistant trim, B48-B56 Viewer, F5, F6 W Wall bumper, E11, E12 Wall holder automatic, E14 manual, E13 Wall stop, E9, E10 Window bar lift, G15 lock, G14 Numerical part index C Flush bolts & coordinators D Latches, catches & bolts E Stops F Exterior hardware G Miscellaneous hardware Ives Architectural hardware products B MB1, C21 MB1F, C22 MB1V, C22 MB2, C21 MB2F, C22 MB2V, C22 MB3F, C22 MB3V, C22 OTP300, B40 R435, E3 R437, E3 R810-DT, B54 RB470, E18 RB471, E18 RB472, E18 RL30, D8 RL30A, D8 RL32, D8 RL32A, D8 RL36, D9 RL36A, D9 RL38, D9 RL1152, D10 S48, D6 SB360, D2 SB453, D2 SB1600M1, D4 SB1600M2, D4 SB1630, D3 SB1640, D3 SP585, G9 SP586, G9 SR64, E25 SR65, E25 SR66, E25 STK685, D10 STK685L, D10 U696, F5 U698, F5 U700, F6 U701, F6 VR810-NL LHR, B55 VR810-NL RHR, B55 VR810-NL-V, B56 VR814-DT, B54 VR814-NL LHR, B55 VR814-NL RHR, B55 VR814-NL-V, B56 VR900 LHR, B57 VR900LLP LH, B58 VR900LLP RH, B58 VR900 RHR, B57 VR904 LHR, B57 VR904LLP LH, B58 VR904LLP RH, B58 VR904 RHR, B57 VR910-DT, B59 VR910M-DT, B61 VR910M-NL LHR, B62 VR910M-NL RHR, B62 VR910-NL, B60 VR914-DT, B59 VR914M-DT, B61 VR914M-NL LHR, B62 VR914M-NL RHR, B62 VR914-NL, B60 WS11, E9 WS11X, E9 WS20, E9 WS20X, E9 WS33, E10 WS33X, E10 WS40, E14 WS45, E14 WS45X, E14 WS65, E10 WS401/402CCV, E11 WS401/402CVX, E11 WS404CVX, E11 WS406/407CCV, E12 WS406/407CVX, E12 WS443, E13 WS445, E13 WS447, E13 WS449, E13 Pulls & plates 8402, B48 8700, B34 8800, B35 8848, B36, B40 8975, B37 9100HD, B18 9103EZHD, B19 9145EZHD, B20 9190EZHD, B22 9190HD, B21 9264, B39 9266, B39 91105F, A73 AP101, B40 AS18, D11 AS895, D11 CB1, C24 CL11, D12 CL12, D12 CL14, D12 CL21, D13 CL21A, D13 CL22, D13 COR, C19 COR7G, C23 COR9G, C23 CS115, E26 DP1, C16 DP2, C16 E91105F, A74 FB31B, C2 FB31P, C2 FB31T, C2 FB32, C3 FB33, C3 FB41B, C4 FB41P, C4 FB41T, C4 FB42, C5 FB51P, C6 FB51T, C6 FB52, C7 FB53, C7 FB61P, C8 FB61T, C8 FB62, C9 FB358, C13 FB457, C14 FB458, C15 FL, C20 FP101, B40 FS9, E7 FS13, E2 FS17, E2 FS18L, E5 FS18S, E5 FS40, E7 FS41, E7 FS42, E7 FS43, E7 FS410, E4 FS434, E5 FS436, E3 FS438, E3 FS439, E4 FS441, E6 FS444, E6 FS446, E8 FS448, E6 FS450, E8 FS452, E15 FS455, E16 FS495, E8 FS496, E8 FS497, E8 FS544, E16 FS555, E16 FS1153, E17 FS1154, E17 LG1, F2 LG7, F2 LG10, F2 LG11, F3 LG12, F3 LG13, F4 LG14, F4 A 3CB1, A6 3CB1HW, A7 3CB1WT, A8 3PB1, A5 3SP1, A9 5BB1, A11 5BB1BSC, A14 5BB1BSCHW, A15 5BB1HW, A12 5BB1SC, A14 5BB1SCHW, A15 5BB1WT, A13 5PB1, A10 22, B63 25, B71 40, D5 42, B69 63, E21 64, E21 69, E22 70, E23 71, G16 72, E24 73, E24 90, G14 112HD, A31 112XY, A32 114XY, A33 157XY, A34 159, G3 210XY, A35 218, B63 221, B64 222, B64 223, B65 224HD, A36 224XY, A37 227, B65 230, B69 253, D5 261, C10 262, C11 265, C12 325, D14 326, D14 327, D14 330, D15 335, D15 336, D15 345, D16 347, D16 349, D17 405, G4 411R-W, E12 430, E5 481, D7 482, D7 506, G10 507, G10 507B, G10 508, G10 508C, G11 509C, G11 510BC, G11 510C, G11 511BC, G12 543, G12 543B, G12 554, G13 558B, G13 559B, G13 571, G4 572, G5 574, G5 575, G6 580, G6 581, G7 582, G8 600, A43 601, F8 611, A47 620, F8 698, F5 700, A43, F6 701, F6 705, A46 711, A47 711CS, A48 715, A49 715CS, A50 919, B66 950, B66 955, B67 960, B67 962, B68 990, B70 991, B71 1000, A16 7212, A54 7212-7212V-7222 INT, A63 7212V, A54 7215, A55 7215-7226-7227 INT, A64 7215F, A55 7215F-7226F-7227F INT, A64 7215PT-7226PT-7227PT INT, A66 7222, A56 7226, A57 7226F, A57 7227, A58 7227F, A58 7230F, A59 7230F-7237F INT, A65 7230FPT - 7237FPT INT, A67 7230FPT-7237FPT INT, A67 7237F, A60 7244F, A61 7244F-7245F INT, A65 7245F, A62 7253, A68 7255, A69 7255J, A70 7256, A71 7259, A72 8102HD, B11 8103EZHD, B13 8103HD, B12 8105, B14 8111-5, B23 8112-5, B23 8121, B24 8145EZHD, B15 8169, B25 8181, B26 8189, B27 8190EZHD, B17 8190HD, B16 8200, B42 8281, B28 8300, B42 8302, B43 8303, B44 8305, B45 8311, B46 8312, B29 8320, B30 8371, B31 8372, B32 8373, B33 8400, B48 Hinges & pivots 02-3125, F7 02-31251, F7 02-31251U, F7 02-31252, F7 02-31252U, F7 07, G14 026, G15 026XY, A23 027XY, A24 040XY, A25 041XY, A26 2, D17 045XY, A27 046XY, A28 053XY, A29 054, D6 054XY, A30 059, G2, G3 060, E19, E20 061, E19, E20 066, G15, G16 243 © 2020 Allegion 005313, Rev. 01/21 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c148 79.164036, 2019/08/13-01:06:57 Create Date : 2021:01:14 15:26:32-05:00 Metadata Date : 2021:01:14 15:28:59-05:00 Modify Date : 2021:01:14 15:28:59-05:00 Creator Tool : Adobe InDesign 15.0 (Macintosh) Instance ID : uuid:1381b0f1-b8d6-af4f-8859-2a745dfcecb4 Original Document ID : xmp.did:5c7d8c15-cb0b-4b03-a52b-c29c94d8aef5 Document ID : xmp.id:ce356434-1a9a-4dc7-9858-f880d44b808f Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:72eeed69-8645-4841-a5d1-85658741f29c Derived From Document ID : xmp.did:992c3d19-8751-423d-bc92-4cf6241dde77 Derived From Original Document ID: xmp.did:5c7d8c15-cb0b-4b03-a52b-c29c94d8aef5 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign 15.0 (Macintosh) History Changed : / History When : 2021:01:14 15:26:32-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 248 Creator : Adobe InDesign 15.0 (Macintosh)EXIF Metadata provided by EXIF.tools