J Communications Co BA-1000U Bluetooth USB Dongle User Manual USB dongle
J Communications Co Ltd Bluetooth USB Dongle USB dongle
User Manual
![](/img.php?id=292162&img=bg1.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 1 -
1. Introduction
1.1. What is BLUEBEE?
BLUEBEE is a Bluetooth USB adapter which provides a wireless network and Internet connection
between PCs without access point and any connection cables. With BLUEBEE, you donβt need to
worry any more about setting up a LAN cable or changing complex network configurations to
access Internet with your laptop computer in the office or at home.
PLEASE READ THROUGH THIS MANUAL BEFORE YOU USE BLUEBEE.
1.1.1. BLUEBEE Wireless Network
BLUEBEE can make a wireless network, Point to Point and Multipoint connection (1 Server : 7
Clients)
A wireless network consists of two sides, a Server and a Client. The Server is a PC that is directly
connected to Internet through ADSL, Cable Modem or LAN. Where as the Client is a PC that can
connect to Internet through the wireless network, which is provide by the Server PC, without having
any direct connection sources.
This manual describes, in detail, installing software, setting network configuration, software user
manual, and troubleshooting.
The three steps below help you configure a wireless network.
A. Install PAN and EasyGate on a Server.
B. Install PAN on a Client(s).
C. Clients attempt to access the Server.
Server: a PC with a direct connection to Internet (such as ADSL, Cable Modem, LAN, or Dial-up
Modem)
Client: a PC without a direct connection to Internet
1.1.2. Main features and specifications
Β§ Wireless Internet and Data sharing
Β§ Plug & Play USB port with high speed support
Β§ Multi-users : Maximum seven PCs can share at the same time
Β§ Bandwidth : Maximum 1Mbps
Β§ Range : 100m
Β§ Security option: Password authentication for network connection
Β§ Specification : Bluetooth Specification 1.1 and PAN Profile V0.96E
BLUEBEE - Wireless Internet Sharing Wizard
- 2 -
1.2. Supplied Items
Β§ Two Bluetooth USB Adapters
Β§ Extension cable
Β§ Program CD
Β§ User Manual
1.3. System Requirements
Β§ CPU : Pentium lll or higher is recommended.
Β§ Memory : 64MB or higher is recommended.
Β§ Interface
Β² Server : a LAN card, a USB port, and CD_ROM
Β² Clients : a USB port and CD_ROM
Β§ Operating System: Windows98SE / ME / 2000 / XP
![](/img.php?id=292162&img=bg3.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 3 -
2. Installing Software
In Chapter 2, a step-by-step installing guide will be given for software installation.
Install PAN on both a Sever and Clients, but EasyGate on the Server only!
[SERVER]
2.1. Installing PAN
First, install PAN on the Server. Assuming D:\ is a CD-ROM Drive, do as follows:
Β§ Double click on the Setup.exe icon at D:\ Pan\ Setup.exe.
Β§ You can install the USB adapter before installing PAN, but we recommend installing the
USB adapter after PAN installation is complete.
2.1.1. InstallShield wizard
Β§ Click on βNextβ button to start installation.
Figure 2-1: PAN Installing Wizard
![](/img.php?id=292162&img=bg4.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 4 -
2.1.2. Software license agreement
Β§ Click βYesβ to continue the installation if you agree to all the terms in the license agreement.
Figure 2-2: Software License Agreement
2.1.3. Choose destination location
Β§ The default location is C:\ Program Files\ IVTCorporation\ MiniBluelet\ Pan.
Β§ Click βNextβ button to install program to this folder.
(Click βBrowseβ to select different destination folder.)
Figure 2-3: Choose Destination Location
![](/img.php?id=292162&img=bg5.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 5 -
2.1.4. Windows2000 or WindowsXP configuration
2.1.4.1. Digital signature [Windows 2000 only]
Β§ If you are using Windows 2000, it might prompt βDigital Signature Not Foundβ form as
follows. In this case, click βYesβ to continue the installation.
Figure 2-4: Digital Signature Prompt [Windows 2000]
2.1.4.2. Installing BT network adapter [Windows XP only]
Β§ If you see similar message as [Figure 2-5] in Windows XP, click βContinue Anywayβ to
continue the installation.
Figure 2-5: BT Network Adapter Installation Message [Windows XP]
![](/img.php?id=292162&img=bg6.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 6 -
2.1.5. InstallShield wizard complete
Β§ If you see as [Figure 2-6], PAN is successfully installed on your computer.
Β§ [Windows98SE / ME] User : Restarting PC is required to accept changes.
Β§ [Windows2000 / XP] User : Restarting PC is not required.
Figure 2-6: PAN Installation is Completed
Note:
Windows98SE / ME Users may experience a failure of locating device drivers while installing
BT network adapter during the PAN software installation process.
In this case, you can install the BT network adapter manually using
C:\ ProgramFiles\ IVTCorporation\ MiniBluelet\ Pan\ Device\ win9x \ IVTnetBT_For98.inf
Please refer to βChapter 6. Troubleshootingβ for more details.
![](/img.php?id=292162&img=bg7.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 7 -
2.1.6. PAN first run configuration
Plug in USB Adapter to any empty USB port.
[Windows98SE / ME ] User: After restarting PC, PAN First Run Configuration window will pop
up automatically.
[Windows2000 / XP] User : Double click on the PAN icon from the Desktop.
Β§ Type user name for βDevice Nameβ. (Example: BT Server, BT Client)
This name will appear on the BlueNetwork list [Refer to Figure 3-1].
Β§ Type passkey in, and retype the passkey to confirm.
Β§ Select the type of your device. For a notebook computer, select βLaptopβ, and otherwise,
select βDesktopβ.
Β§ Check mark on βAutomatically start Panβ if you want to make PAN application operate
immediately whenever the system is booted.
Β§ You need to do this initial configuration only once, and the configuration is changeable.
Figure 2-7: Initial PAN Configuration
![](/img.php?id=292162&img=bg8.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 8 -
2.1.7. Select work mode
Β§ You might see a notice as [Figure2-8], if the USB Adapter is not plugged in.
(If you have completed section 2.1.6 successfully, you may skip this section.)
Β§ Make sure the USB adapter is properly plugged in, and click βExitβ button.
And then run PAN application again.
It might take a few minutes to configure the USB Adapter.
Figure 2-8: Select Work Mode
![](/img.php?id=292162&img=bg9.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 9 -
2.2. Installing EasyGate
After completing PAN installation, install EasyGate on the Server.
EasyGate is an Internet sharing program, which enables the Clients to share the Internet
connection through the Server.
If your Internet connection is LAN, ADSL, or Cable Modem, then refer to section 2.2.1 to install
EasyGate. If your Internet connection is a dial-up modem, refer to section 2.2.2 to install EasyGate.
2.2.1. If you have LAN, ADSL, or Cable Modem
Before installing EasyGate, run PAN by double clicking PAN icon on the Desktop.
The PC on which you are installing EasyGate needs to be connected to Internet before you install
EasyGate.
Assuming D:\ is the CD-ROM Drive,
Β§ Double click βD:\ EasyGate\ Setup.exeβ to run installation program.
2.2.1.1. Choosing network adapter
Β§ After EasyGate βFinish checking IP address for usingβ, choose network adapter that is
connected to the Internet, and then click βConfigurationβ button.
Β§ In Windows98SE / ME, the name of network adapter is usually the manufactureβs model
name. In Windows 2000 / XP, the name of network adapter can be found under βNetwork
Environmentβ properties.
Figure 2-9: Choosing Network Adapter
Β§ Reboot your computer to complete the installation process.
Figure 2-10: Installation Complete
![](/img.php?id=292162&img=bga.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 10 -
2.2.1.2. Confirmation of software installation
After rebooting your computer, PAN and EasyGate will run together at the same time.
Β§ A notice window will pop up for PAN information.
Figure 2-11: PAN Information
Β§ You can also find βBlue Starβ icon and the βEasyGate networkβ icon on the right corner of
the window taskbar.
Figure 2-12: Blue Star Icon and EasyGate Icon
![](/img.php?id=292162&img=bgb.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 11 -
2.2.2. If you have Dial-up Modem (if you have high speed Internet, refer to 2.2.1)
Before installing EasyGate, run PAN by double clicking PAN icon on the Desktop.
The PC on which you are installing EasyGate needs to be connected to Internet before you install
EasyGate. Therefore connect to Internet using βDial-Up Networkingβ before you install EasyGate.
(If you are using customized dial-up Internet program, you may not be able to use EasyGate.
Please refer to βChapter 6. Troubleshootingβ for more details.)
Assuming D:\ is the CD-ROM Drive,
Β§ Double click βD:\ EasyGate\ Setup.exeβ to run installation program.
2.2.2.1. Choosing network adapter
Β§ After EasyGate βFinish checking IP address for usingβ, choose βDial-Up Adapterβ as a
network adapter, and then click βConfigurationβ button.
Figure 2-13: Choosing Network Adapter
Β§ Reboot your computer to complete the installation process.
Figure 2-14: Installation Complete
![](/img.php?id=292162&img=bgc.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 12 -
Β§ After rebooting, you have lost dial-up Internet connection and as a result, you will see
following message pop up. Click on βOkβ button.
Figure 2-15: Network Connection Confirm Message
Β§ When βEasyDialβ window appears, enter βUser nameβ and βPasswordβ, choose βNetwork
nameβ, then click βDialβ button.
Figure 2-16: EasyDial window
[CLIENTs]
2.3. Installing PAN
Install PAN application on Clients. The installation procedure is same as oneβs on the Server.
Refer section 2.1 (page 3 ~ ) for step-by-step installation guide.
DO NOT INSTALL EasyGate ON CLIENTs.
![](/img.php?id=292162&img=bgd.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 13 -
3. Network Configuration
In Chapter 3, a detailed explanation of network configuration between the Server and the Clients
will be given.
βComputer nameβ and βWorkgroupβ of Server and Clients are set as indicated in the following table.
Computer name Workgroup
Server Bluebee Server Bluebee
Client Bluebee Client Bluebee
You can check your computer name and itβs workgroup as follows.
[Windows98SE / ME] User : βNetwork Neighborhoodβ -> βPropertiesβ -> βIdentificationβ Tab
[Windows2000 / XP] User : βMy Computerβ -> βPropertiesβ -> βNetwork Identificationβ Tab
Please, make sure to have same βworkgroupβ names for all computers.
3.1. Using PAN
Β§ Clients attempt to access the Server.
(Before you attempt to access the Server, make sure the Server is running βPAN, and
βEasyGateβ, on other hand, the Client is running βPANβ.)
3.1.1. Searching BlueNetwork list
Β§ Double click on the Blue Star icon on the taskbar of a Client to join BlueNetwork.
Β§ Click on βSearchβ button to search more Bluetooth devices around.
Figure 3-1: Search for Wireless Network
![](/img.php?id=292162&img=bge.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 14 -
3.1.2. Joining BlueNetwork
Β§ Select a desired Server from the BlueNetwork List, and click βJoinβ button. Or you can
simply double click on the Server name to join BlueNetwork.
Β§ Enter the passkey as you have set on [Figure 2-7].
Figure 3-2: Enter Passkey to Join BlueNetwork
Β§ When you have successfully joined BlueNetwork, acquired IP address will be noticed and
the βBlue Starβ icon on the taskbar will start spinning. If you donβt see the notice or the
acquired IP address is not 192.168.X.X, then disconnect the connection and try again.
Figure 3-3: IP Address is Acquired
Β§ You have successfully configured the wireless network between a Server and a Client, and
now Client can also use the Internet.
Figure 3-4: Computers Near Me
If a Client uses Internet again after it is rebooted, it must be connected with a Server as
above process of 3.1.2. βJoining BlueNetworkingβ
![](/img.php?id=292162&img=bgf.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 15 -
4. Software Manual
In chapter 4, you will find more detailed user manual and explanation about PAN and EasyGate
program.
[PAN]
4.1. PAN menu
Β§ Right click on the Blue Star icon to see the PAN menu.
Figure 4-1: PAN Menu
4.2. About PAN
Β§ It displays software version as well as other device information such as Device Name,
Manufacturer, and Device Address. Device Name is the name that appears on the
BlueNetwork List when other devices search on BlueNetwork.
Figure 4-2: About PAN
![](/img.php?id=292162&img=bg10.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 16 -
4.3. Joining BlueNetwork
Β§ By selecting a desired Server from the BlueNetwork List, it configures wireless network
with the Server and allows for Clients to share the Internet through the Sever.
Β§ From the PAN menu, Click βJoin BlueNetworkβ. Or simply double click on the βBlue Starβ
icon on the taskbar.
Β§ Click βSearchβ button to search more Bluetooth devices around. Device names in blue color
are available devices for wireless network connection.
Β§ Select a desired sever name, and click βJoinβ button.
When βInput Passkeyβ window appears, enter the passkey that had been set on the Server.
Figure 4-3: Joining BlueNetwork
After wireless connection is established, the Server assigns IP address to the Clients, allowing them
to share the Internet through the Server. The Blue Star icon on the taskbar starts spinning as soon
as the connection is established. If it stops spinning, it means the connection has been dropped and
you need to reestablish the connection. If you place the mouse pointer on the spinning Blue Star
icon, it will display acquired IP address and this means the connection is in normal mode.
If youβre having trouble establishing wireless network, exit PAN and try βSearchβ and βJoinβ again.
![](/img.php?id=292162&img=bg11.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 17 -
4.4. Connection Status (User Management)
Β§ When the wireless network is established, βConnection Statusβ will appear on Clientβs PAN
menu and βUser Managementβ will appear on Serverβs PAN menu.
Β§ βRSSI(Receiver Signal Strength Indicator)β on Connection Status window indicates the
strength of receiver signal. As the level goes down, the connection status becomes better.
Β§ To disconnect the connection between the Server and Clients, click βDisconnectβ button
from [Figure 4-6], or select device and click βDisconnectβ button from [Figure 4-7].
Figure 4-4: Connection Status on Clientβs Menu Figure 4-5: User Management on Serverβs Menu
Figure 4-6: Connection Status
Figure 4-7: User Management
![](/img.php?id=292162&img=bg12.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 18 -
4.5. Option settings
Β§ The sub sections include Access Passkey, Advanced Settings, NAP settings, and
Automatic start option.
4.5.1. Change access passkey
Setting Access Passkey prevents any unauthorized access to the Server. The default Passkey is
βrootβ, and you can change Passkey by entering a new Passkey into βPasskeyβ and βConfirmβ boxes.
NAP is an acronym of Network Access Point and can be used as an option to configure a server.
NAP is useful to expand LAN cable wired network such as in small office or home to a wireless
network. But NAP is not applied to WAN (such as ADSL and cable modem). Since NAP performs
software bridge function, it also increases the CPU usage level. Therefore, it is recommended not
to use NAP option unless it is necessary.
Figure 4-8: Changing Passkey
![](/img.php?id=292162&img=bg13.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 19 -
4.5.2. Advanced settings
Β§ Advanced Settings are about the Bluetooth options and is recommended to use
provided default values.
4.5.2.1. Security
Β§ This tab includes βSecurity Modeβ and βMiscellaneousβ subsections. Set the Security Mode
on βNo securityβ, then βPassword windowβ doesnβt appear when you access the device.
Figure 4-9: Security
4.5.2.2. Optimization
Β§ This tab has subsections including βSearch modeβ, βDevice Shortcutβ, and βAutomatic Joinβ.
In case you previously save the device address of then server as shown in [Figure 4-3],
search time will possibly be saved.
Figure 4-10: Optimization
![](/img.php?id=292162&img=bg14.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 20 -
4.5.2.3. Bluetooth device
Β§ You can check Device Name and Device Address.
Figure 4-11: Bluetooth Device
4.6. Exit
Β§ Exit PAN first before you turn off or reboot you PC.
Figure 4-12: Exit on PAN Menu
![](/img.php?id=292162&img=bg15.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 21 -
[EasyGate]
4.7. EasyGate menu
Β§ Right click on the βEasyGate Networkβ icon to see the EasyGate menu.
Figure 4-13: EasyGate Menu
4.8. Open
Β§ You can configure Network Adapter information and options.
βAdapter to the Internetβ will select the actual LAN card. Uncheck mark on βUse DHCPβ,
then click βDHCP Configβ¦β button to assign IP address manually to Client.
Figure 4-14: EasyGate Configuration
4.9. Miscellaneous
If you want to close the Internet sharing and network service, click βStop Serviceβ from the menu. If
you want to completely exit program, click βExitβ from the menu. If you need any additional help,
click βHelpβ from the menu.
![](/img.php?id=292162&img=bg16.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 22 -
5. Uninstalling Software
In chapter 5, you will find out how to uninstall program successfully.
Important! For Server, uninstall EasyGate first, before you uninstall PAN.
[PAN]
5.1. Uninstalling PAN
Exit PAN first, from the PAN menu and remove Bluetooth adapter prior to uninstalling PAN
software.
β
If this computer is a Server, then make sure you have already uninstalled EasyGate before you
continue uninstalling PAN. Refer section 5.2 to uninstall EasyGate.
5.1.1. Run βUninstall PANβ
Β§ Click on βStartβ -> βProgramsβ -> βMiniBluelet_Panβ -> βUninstall Panβ.
Figure 5-1: Uninstalling PAN
![](/img.php?id=292162&img=bg17.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 23 -
Β§ Press βOKβ to continue PAN uninstallation process.
Figure 5-2: Confirm Uninstallation
Β§ PAN Uninstall Wizard will be executed.
Figure 5-3: PAN Uninstall Wizard
Β§ Uninstallation Complete
[Windows98SE / ME] User : Reboot you PC to complete uninstallation.
[Windows2000 / XP ] User : Rebooting is not required.
Figure 5-4: PAN Uninstallation Complete
5.1.2. PAN uninstallation troubleshooting
Β§ If you encounter any errors during uninstallation process, exit PAN Uninstall Wizard, and
try to run it again.
![](/img.php?id=292162&img=bg18.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 24 -
[EasyGate]
5.2. Uninstalling EasyGate
Exit EasyGate first, from the EasyGate Network icon in window task bar. Then run EasyGate
uninstall program.
5.2.1. Run βEasyGate Uninstallβ
Β§ Click on βStartβ -> βProgramsβ -> βMiniBluelet_Panβ -> βEasyGate Uninstallβ.
Figure 5-5: Uninstalling EasyGate
Β§ Click βUninstallβ button. Uninstallation does not require rebooting.
Figure 5-6: EasyGate Uninstall
![](/img.php?id=292162&img=bg19.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 25 -
6. Troubleshooting
Here are the general tips and troubleshooting to the most common problems you might encounter.
6.1. USB Adapter Initial Installation Error
If you plug in USB Adapter to an empty USB port after you have installed PAN, then Windows will
automatically install its driver. But, if you see an error message saying βCannot find Btusb.sysβ, click
on βBrowseβ to locate the file from
βC:\ Program Files\ IVT Corporation\ MiniBluelet\ Pan\ Driver\ USB\ BTusb.sysβ.
Once USB is installed, Windows will be able to recognize it in next time.
6.2. BT Network Adapter First time Installation Error
While installing PAN, if you cannot find BT network adapter driver, then locate file from
βC:\ Program Files\ IVT Corporation\ MiniBluelet\ Pan\ Device\ win9x\ IVTnetBT_For98.infβ.
If you encounter BT network adapter related errors after rebooting your system, remove adapter
and reinstall it. This kind of error will not occur in the second installation attempt.
6.3. Running PAN for the First Time
When you initially run PAN under Windows98SE / ME, it might take a few minutes for the system to
allocate MAC address to BT network adapter, and an error might occur due to this delay. If an error
occurs in the system, Exit PAN and reboot your computer. At this time, the system will store MAC
address, and the same problem will not be repeated.
6.4. Internet Connection Problem with LAN Adapter
It might raise an Internet connection problem when a PC, which is running Windows98SE / ME with
a LAN card but uses the Internet through USB adapter as a Client in wireless network, now wants to
switch back to LAN card to use the Internet. This is because the system overwrites the default
Gateway routing table with Bluetooth Adapter Gateway when you install USB adapter under
Windows98SE / ME. (Note: you can verify this using βroute printβ commend on MS-DOS prompt.)
This problem is due to the fact that Windows98SE / ME manages Route Table in static manner
depending on the network settings. Whereas Windows2000 / XP does not encounter to this
particular problem since it manages Route Table in dynamic manner depending on the network
cards.
To resolve this problem, βMy Computerβ -> βPropertiesβ -> βDevice Managerβ Tab -> Network
adapters -> Select βBT Network Adapterβ -> βPropertiesβ -> Check mark on βDo not use this device
(disable)β.
If you want to use BT network adapter again to be a client on a wireless network, disable the LAN
![](/img.php?id=292162&img=bg1a.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 26 -
card in the same manner and enable BT Network Adapter.
6.5. βSelect User Modeβ window prompt while running PAN
If βSelect User Modeβ window prompts while running PAN, it might be the case where the system
cannot recognize the USB adapter. Please verify if the USB adapter is properly plugged in.
If you are still encountering the same message, check βDevice Managerβ from βMy Computerβ and
see if USB is properly installed. And if not, unplug the USB adapter from the USB port and plug in
again so that system can install the USB adapter automatically.
6.6. PAN Troubleshooting
After you have established connection to BlueNetwork, if you cannot use the Internet, then open
MS-DOS prompt and type βping www.yahoo.comβ. If the result is βdestination is unreachableβ or
βHardware errorβ, then reboot your computer and run PAN again.
6.7. Joining BlueNetwork Troubleshooting
When you join the BlueNetwork, you will see a message like [Figure 6-1] and then it will display βIP
address acquiredβ message as in [Figure 3-3].
If you only see a message like [Figure 6-1], without βIP address acquiredβ message, then it means
IP address was not successfully acquired. In this case, exit PAN and run PAN again, and then try to
join again.
Figure 6-1: Device Connecting Message
![](/img.php?id=292162&img=bg1b.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 27 -
6.8. Confirmation of hardware installation
Once you have installed PAN, hardware installation is done automatically (plug-and-play) by
plugging the USB adapter into computer.
Β§ [Windows98SE / ME] User: Check hardware installation of these three items.
Right click on βMy Computerβ -> βPropertiesβ -> βDevice Managerβ tab.
- Network adapters : BT Network Adapter
- Universal serial bus controllers : Bluetooth USB
- BlueletMgrDevice : Bluelet Device Manager
Figure 6-2: [Windows98SE / ME] Device Manager
![](/img.php?id=292162&img=bg1c.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 28 -
Β§ [Windows2000 / XP] User: Check hardware installation of these three items.
Right click on βMy Computerβ -> βPropertiesβ -> βHardwareβ Tab -> βDevice Managerβ.
- Network adapters : BT Network Adapter
- Universal serial bus controllers : Bluetooth USB
- Bluelet device manager : Bluelet Device Manager
Figure 6-3: System Properties
Figure 6-4: [Windows2000 / XP] Device Manager
![](/img.php?id=292162&img=bg1d.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 29 -
6.9. Dial-Up Networking
Β§ [Windows98SE / ME] User : βStartβ button -> βSettingsβ -> click βDial-Up Networkingβ.
Or βStartβ button -> βProgramsβ -> βAccessoriesβ -> βCommunicationβ -> βDial-Up Networkingβ
[Windows2000 / XP] User : right click βMy Network Placesβ -> βPropertiesβ -> βMake New
Connectionβ
Figure 6-5: Dial-Up Networking
Β§ Double click on βMake New Connectionβ
Figure 6-6: Make New Connection
Β§ Type a name for the computer you are connecting to.
In this manual, we used βMy Connectionβ as a name.
Figure 6-7: Make New Connection
![](/img.php?id=292162&img=bg1e.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 30 -
Β§ Type the phone number of the Internet Service Provider, and click βNextβ.
Figure 6-8: Enter ISPβs dial-up phone number
Β§ You have completed creating a dial-up networking connection. Click βFinishβ button.
Figure 6-9: Finish creating a dial-up connection
Β§ From βDial-Up Networkingβ window, you can find βMy Connectionβ icon has been
generated. Double click on βMy Connectionβ icon.
Figure 6-10: My Connection icon
![](/img.php?id=292162&img=bg1f.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 31 -
Β§ Enter βUser nameβ and βPasswordβ, then click βConnectionβ button.
Figure 6-11: Connecting to ISP
Β§ After you see βInternet connection establishedβ message pop up, you can surf the Internet
using Internet browser such as Internet Explorer, Netscape.
BLUEBEE - Wireless Internet Sharing Wizard
- 32 -
* Notice1 : The changes or modifications not expressly approved by the party responsible for
compliance could void the userβs authority to operate the equipment.
* IMPORTANT NOTE : To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the antenna or the device could
result in the device exceeding the RF exposure requirements and void userβs authority to operate
the device.
FCC INFORMATION
The Federal Communication Commission Radio Frequency Interference Statement
includes the following paragraph:
The equipment has been tested and found to comply with the limits for a Class B Digital
Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction, may cause harmful interference to radio communication. However, there is no grantee
that interference will not occur in a particular installation. If this equipment dose cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the equipment and receiver.
n Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
n Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written approval Form J
communications Co., Ltd. Modification could void authority to use this equipment.
![](/img.php?id=292162&img=bg21.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 33 -
ξ Product Specifications ξ
Key Features
Bluetooth Specification V 1.1 compliant / class1
USB Specification V 1.1 compliant
Radio output power 1 to 10 dBm (100 m range)
Connection speed 1 Mbps across air
Internet Connection up to 7 clients without Access Point simultaneously
Support O/S Windows 98SE / ME / 2000 / XP
Internet connection sharing router - One click S/W
Software and firmware are upgradable
Specifications
Operation frequency 2.402 ~ 2.4835 GHz (ISM band)
Tx power 10 dBm max with power control
Sensitivity -80 dBm
Data rate 723.2 Kbps
Security Paring / Digital Encryption / Authentication
DC power 5.0 V Β± 10 %
Operation temperature -10 β ~ 55 β
Humidity 10 % ~ 90 %
Dimension 59 X 33 X 11 mm
ξ Limited Product Warranty ξ
We, JCommunications Co., Ltd, warrant this product against defects in materials and workmanship.
If a defect is discovered, we will, at its option, repair or replace the product at no charge provided it
is returned during the warranty period to the authorized dealer from whom you purchased the
product, or directly to our company. Proof of purchase may be required.
If the product has been damaged by accident, abuse, misuse, or misapplication, a limited warranty
will be applied with appropriate service charge on your cost.
We recommend you fill out the following Personal Reference Sheet, and keep it with the proof of
purchase for future convenience.
![](/img.php?id=292162&img=bg22.png)
BLUEBEE - Wireless Internet Sharing Wizard
- 34 -
ξ Warranty Certificate ξ
Thank you for choosing our product. The warranty period starts on the day you purchase our
product. Therefore we recommend you to keep this certificate with the proof of purchase, and
receive full coverage of warranty.
ξ Warranty Details
1. Warranty period is 1 year from the day of purchase. (Only for defects in materials and
workmanship.)
2. For the following cases, a limited warranty will be applied with appropriate service
charge on your cost.
* Damaged by accident, misuse, or misapplication.
* Damaged by natural disaster.
* Damaged by using incorrect voltage source.
* Damaged by bad connection
3. We keep the parts of specific model for three years for replacing purpose.
Β§ This 3-year period start from the discontinuation date for each model.
ξ Personal Reference Sheet
Customer Compensation Standard for this product follows the customer compensation regulation by
the Ministry of Finance and Economy.
Product Bluetooth USB Adapter BLUEBEE BA1000U
Serial Number
Purchase Date
Warranty Period Until _____________, _______ (Month Day, Year)
Name
Phone #
Customer
Address
Name
Phone #
Dealer
Address
We will keep providing updated version of the software for this product. You can download the
newest version from our website at http://www.bluebee.co.kr.
If you have any comments or questions about our product, you can email us at
bluebee@bluebee.co.kr Once again we thank you for choosing our product, and hope you enjoy the
wireless Internet sharing.