JABIL CIRCUIT DMCXACT GPS TRACKER User Manual Spectralight User Guide

JABIL CIRCUIT (WUXI) CO., LTD GPS TRACKER Spectralight User Guide

Contents

Users Manual 1

Quick Start Guidefor Xact Trax PlusModel Number: XT50
Controls1. Panic Button - Sends an alertnotification.2. Power button - turns the XactTrax on or off and can set devicelevel features3. Mini USB Connector- Batterycharging and PC connection.4. Power LED - Red (only applicable ifnot disabled)5. GSM LED - Green (only applicable ifnot disabled)6. GPS LED - Amber (only applicable ifnot disabled)Activating Your Xact Trax Plus1. Connect your device to your PC for a complete charge. Power on thedevice by pressing the power button for 1.5 seconds (until the PowerLED flashes Green), Place your device near a window at this time ifpossible.2. While connected to your PC; go to http:\\www.xacttrax.com andclick on register new device. Follow the on screen instructions.3. By activating the Xact Trax Plus device you are agreeing to all termsand conditions. Please Read all Terms and conditions carefully beforeactivating your device.123456
Using your Xact Trax Plus for the first time (Power On)1. To turn on your Xact Trax Plus device press the power button for 1.5seconds until the Power LED begins to flash Green. This LED will flashRed once fully powered on.2. Place your Xact Trax Plus device outside or close to a window thefirst time until you see the GSM Signal (Green) and GPS Satellite(Amber) LED’s flash, to lock the initial location. Once your Traxdevice is able to track your location it is ready for use. (this could takeseveral minutes to acquire GSM and GPS signal based on geo-graphical location and environmental conditions.)3. Once the Xact Trax Plus device has a GSM and GPS Satellite fix, placeyour Xact Trax Plus device on the object you wish to track.4. Login to http:\\portal.xacttrax.com to follow and manage yourdevice.Power down1. Press the power button for > 5 seconds.2. All LED’s flash Red to indicate the device is powering down.3. All LED’s shut off when powered off.Sending an Panic requestPress and hold the Panic button for longer then 3 seconds. (Pleasemake sure this feature is enabled on your device; to do so log in toxacttrax.com). Please see website for further details on use of thisfeature.Park ModeA temporary Geofence with a radius of 300 meters will be activearound the current device location while in Park Mode. This Geofencewill be deleted once the device is returned to Normal Operation. 1. While in Normal Operation mode, Hold the Power button for > 3seconds.
2. All LED’s will flash Red at 3 second intervals to indicate park Modeis active.To return to Normal Operation1. Hold the Power button again for > 3 seconds.2. The LED’s will return to the Normal Operation state.Walk ModeGeofence alerts will be temporarily disabled while in Walk Mode. Thealerts will be re-enabled when the Xact Trax Plus returns to NormalOperation.1. From Normal Operation mode, hold the Power button for 1.5 seconds.2. All LED’s will flash Green at 3 second intervals to indicate walk Modeis active.To return to Normal Operation1. Hold the Power again button for 1.5 seconds.2. The LED’s will return to the Normal Operation state.LED StatesIf LED is off no GSM or GPS signal can be found. LED States Blinking All Green All Amber All RedPOWER Red - Power is onWalkModeParkModePoweringOffGSM Green - Connectedto celluler NetworkGPS Amber - ObtainedGPS Satellite Fix
Warranty InformationOne-Year Limited WarrantyThis limited warranty sets forth all Xact Technology responsibilitiesregarding your product. There are no other expressed or impliedwarranties from Xact Technology.Warranty Service ProvidedIf you purchased the product new from an approved vendor, XactTechnology warrants the equipment against defects in material andworkmanship for a period of one (1) year from the original date ofpurchase. This warranty is in lieu of all other express warranties. Thiswarranty period begins when you purchase the product and continuesfor one (1) year unless you sell or rent the unit, in which case thewarranty period ends.Xact Technology disclaims any implied warranty, including thewarranty of merchantability and the warranty of fitness for a particularpurpose, as of the date of one year from your original purchase of theproduct Xact Technology assumes no responsibility for any special,incidental, or consequential damages.This warranty gives you specific legal rights and you may have otherrights which vary from state to state. Some states do not allow theexclusion or limitations of special, incidental, or consequentialdamages or limitations on how long a warranty lasts, so the aboveexclusion or limitation may not apply to you.
Xact Technology, LLCNew York, NYCustomer Servicewww.xacttechnology.comPrinted on Recycled Paper©2009 Xact Technology, LLCAll rights reserved.Warranty Service Not ProvidedThis warranty does not cover damage resulting from accident, misuse,abuse, improper installation or operation, lack of reasonable care,unauthorized modification, or the affixing of any attachment notprovided or approved by Xact Technology with the equipment, and/orloss of parts. This warranty is voided in the event any unauthorizedperson opens, alters, or repairs the product.All Xact Technology equipment being returned for repair must besuitably packaged with all original components.Please use only the USB cable that has been supplied with your devicefor PC connection and charging your Xact Trax Plus.Any changes or modifications to the unit not expressly approved byXact will void your warranty and invalidate your authority to operatethis equipment.Warning: The FCC and FAA have not certified the Xact Trax Plus for use in anyaircraft (neither portable nor permanent installation). Therefore, Xactcannot support this type of application or installation.

Navigation menu