JABIL CIRCUIT DMCXACT GPS TRACKER User Manual Spectralight User Guide

Download:
Mirror Download [FCC.gov]
Document ID	1269783
Application ID	FM2RcjePP1hcz04EvF7iJQ==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.53kB (344157 bits)
Date Submitted	2010-04-20 00:00:00
Date Available	2010-04-20 00:00:00
Creation Date	2009-10-15 14:07:33
Producing Software	QuarkXPress(R) 8.02
Document Lastmod	2009-10-15 14:07:47
Document Title	Spectralight User Guide.qxd
Document Creator	QuarkXPress(R) 8.02

Quick Start Guide
for Xact Trax Plus
Model Number: XT50
Controls
1. Panic Button - Sends an alert
notification.
2. Power button - turns the Xact
Trax on or off and can set device
level features
3. Mini USB Connector- Battery
charging and PC connection.
4. Power LED - Red (only applicable if
not disabled)
5. GSM LED - Green (only applicable if
not disabled)
6. GPS LED - Amber (only applicable if
not disabled)
Activating Your Xact Trax Plus
1. Connect your device to your PC for a complete charge. Power on the
device by pressing the power button for 1.5 seconds (until the Power
LED flashes Green), Place your device near a window at this time if
possible.
2. While connected to your PC; go to http:\\www.xacttrax.com and
click on register new device. Follow the on screen instructions.
3. By activating the Xact Trax Plus device you are agreeing to all terms
and conditions. Please Read all Terms and conditions carefully before
activating your device.
Using your Xact Trax Plus for the first time (Power On)
1. To turn on your Xact Trax Plus device press the power button for 1.5
seconds until the Power LED begins to flash Green. This LED will flash
Red once fully powered on.
2. Place your Xact Trax Plus device outside or close to a window the
first time until you see the GSM Signal (Green) and GPS Satellite
(Amber) LED’s flash, to lock the initial location. Once your Trax
device is able to track your location it is ready for use. (this could take
several minutes to acquire GSM and GPS signal based on
geographical location and environmental conditions.)
3. Once the Xact Trax Plus device has a GSM and GPS Satellite fix, place
your Xact Trax Plus device on the object you wish to track.
4. Login to http:\\portal.xacttrax.com to follow and manage your
device.
Power down
1. Press the power button for > 5 seconds.
2. All LED’s flash Red to indicate the device is powering down.
3. All LED’s shut off when powered off.
Sending an Panic request
Press and hold the Panic button for longer then 3 seconds. (Please
make sure this feature is enabled on your device; to do so log in to
xacttrax.com). Please see website for further details on use of this
feature.
Park Mode
A temporary Geofence with a radius of 300 meters will be active
around the current device location while in Park Mode. This Geofence
will be deleted once the device is returned to Normal Operation.
1. While in Normal Operation mode, Hold the Power button for > 3
seconds.
2. All LED’s will flash Red at 3 second intervals to indicate park Mode
is active.
To return to Normal Operation
1. Hold the Power button again for > 3 seconds.
2. The LED’s will return to the Normal Operation state.
Walk Mode
Geofence alerts will be temporarily disabled while in Walk Mode. The
alerts will be re-enabled when the Xact Trax Plus returns to Normal
Operation.
1. From Normal Operation mode, hold the Power button for 1.5 seconds.
2. All LED’s will flash Green at 3 second intervals to indicate walk Mode
is active.
To return to Normal Operation
1. Hold the Power again button for 1.5 seconds.
2. The LED’s will return to the Normal Operation state.
LED States
LED States
Blinking
POWER
Red - Power is on
GSM
Green - Connected
to celluler Network
GPS
Amber - Obtained
GPS Satellite Fix
All Green All Amber
Walk
Mode
If LED is off no GSM or GPS signal can be found.
Park
Mode
All Red
Powering
Off
Warranty Information
One-Year Limited Warranty
This limited warranty sets forth all Xact Technology responsibilities
regarding your product. There are no other expressed or implied
warranties from Xact Technology.
Warranty Service Provided
If you purchased the product new from an approved vendor, Xact
Technology warrants the equipment against defects in material and
workmanship for a period of one (1) year from the original date of
purchase. This warranty is in lieu of all other express warranties. This
warranty period begins when you purchase the product and continues
for one (1) year unless you sell or rent the unit, in which case the
warranty period ends.
Xact Technology disclaims any implied warranty, including the
warranty of merchantability and the warranty of fitness for a particular
purpose, as of the date of one year from your original purchase of the
product Xact Technology assumes no responsibility for any special,
incidental, or consequential damages.
This warranty gives you specific legal rights and you may have other
rights which vary from state to state. Some states do not allow the
exclusion or limitations of special, incidental, or consequential
damages or limitations on how long a warranty lasts, so the above
exclusion or limitation may not apply to you.
Warranty Service Not Provided
This warranty does not cover damage resulting from accident, misuse,
abuse, improper installation or operation, lack of reasonable care,
unauthorized modification, or the affixing of any attachment not
provided or approved by Xact Technology with the equipment, and/or
loss of parts. This warranty is voided in the event any unauthorized
person opens, alters, or repairs the product.
All Xact Technology equipment being returned for repair must be
suitably packaged with all original components.
Please use only the USB cable that has been supplied with your device
for PC connection and charging your Xact Trax Plus.
Any changes or modifications to the unit not expressly approved by
Xact will void your warranty and invalidate your authority to operate
this equipment.
Warning: The FCC and FAA have not certified the Xact Trax Plus for use in any
aircraft (neither portable nor permanent installation). Therefore, Xact
cannot support this type of application or installation.
Xact Technology, LLC
New York, NY
Customer Service
www.xacttechnology.com
Printed on Recycled Paper
©2009 Xact Technology, LLC
All rights reserved.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2009:10:15 14:07:33-05:00
Creator Tool                    : QuarkXPress(R) 8.02
Modify Date                     : 2009:10:15 14:07:47-04:00
Metadata Date                   : 2009:10:15 14:07:47-04:00
Producer                        : QuarkXPress(R) 8.02
Format                          : application/pdf
Title                           : Spectralight User Guide.qxd
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Document ID                     : uuid:e951a572-c9a6-4709-96bd-a393afa2c863
Instance ID                     : uuid:970946a8-7555-45f3-ad43-d5dac86c667d
Page Count                      : 6
Creator                         : QuarkXPress(R) 8.02

EXIF Metadata provided by EXIF.tools