JADAK a business unit of Novanta 6XYZ-0003-01 JADAK/PRI BLUETOOTH MODULE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3680760
Application ID	7IvLDwo9Kcl5YQsKBAC3vQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.39kB (317326 bits)
Date Submitted	2017-12-15 00:00:00
Date Available	2017-12-15 00:00:00
Creation Date	2017-12-08 16:04:24
Producing Software	Microsoft® Word 2010
Document Lastmod	2017-12-08 16:04:24
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Steve Bryant

JADAK/PRI Bluetooth Module
User’s Manual/Instructions for Integration into PRI Products
FCC ID: 2AAVI-6XYZ-0003-01; IC: 11355A-6XYZ000301
Conditions for using JADAK/PRI Regulatory Approvals:
A. When integrated into a JADAK/PRI product, it must be ensured that there are no modifications
that may invalidate regulatory approvals or may necessitate notifications to the relevant
regulatory authorities.
B. Any changes may require a Class II permissive change for the FCC.
C. Appropriate labels must be affixed to the JADAK/PRI end products that comply with applicable
regulations in all respects.
D. The minimum separation distance that must be maintained between the instrument and the
user is 20 cm.
E. The JADAK/PRI product approved as a host into which this module can be integrated is the
Model PR-655 Spectroradiometer.
F. A user’s manual or instruction manual must be included with the JADAK/PRI product that
contains the text as required by applicable law. Without limitation of the foregoing, an example
(for illustration purposes only) of possible text to include is set forth below:
1. USA-Federal Communications Commission (FCC)
FCC Rule Part 15.19(a)(3) Compliance Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Rule Part 15.21 Statement:
Any changes/modifications to this equipment not approved by JADAK could void the user’s authority to
operate the equipment.
FCC Radio-Frequency Exposure & Approval Conditions:
1. The antenna(s) used for this transmitter must not be collocated or operating in conjunction
with any other antenna or transmitter within a host device, except in accordance with FCC
multi-transmitter product procedures.
2. Only those antennas with same type and lesser gain filed under this FCC ID number can be
used with this device.
3. The regulatory label on the final system must include the statement: “Contains FCC ID:
2AAVI-6XYZ-0003-01 and IC: 11355A-6XYZ000301 “or using electronic labeling method as
documented in KDB 784748.
4. The final system integrator (JADAK/PRI) must ensure there is no instruction provided in the
user manual or customer documentation indicating how to install or remove the transmitter
module except such device has implemented two-ways authentication between module and
the host system.
5. The final host manual shall include the following regulatory statement:
FCC Rule Part 15.105(b) Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna
 Increase the separation between the equipment and receiver
 Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
 Consult the dealer or an experienced radio/TV technician for help
2. Canada- Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter, IC ID: 11355A-6XYZ000301, has been submitted for approval by Industry Canada
to operate with the onboard antenna with a maximum gain of +4.4dBi. Any other antennas with a
different type or having a gain greater than +4.4dBi are strictly prohibited for use with this device. The
required antenna impedance is 50 ohms.
Caution: Exposure to Radio Frequency Radiation.
To comply with RSS 102 RF exposure compliance requirements, for mobile configurations, this device
must not be co-located or operating in conjunction with any other antenna or transmitter.
System integrators must include a label with “Contains IC: 11355A-6XYZ000301” on the end product.
Industry Canada user statements should be provided in both English and French, at the time each
product is offered for sale or lease in Canada.
Integration into hosts other than approved host under the LMA requires coordination with JADAK/PRI
through a Class 2 permissive change.
French:
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s) . Son
fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit OEM Installation
Guidance Document For JADAK/PRI part number 6XYZ-0003-01; FCC ID: 2AAVI-6XYZ-0003-01; IC:
11355A-6XYZ000301 pas provoquer d'interférences et ( 2) cet appareil doit accepter toute interférence ,
y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
Conformément à la réglementation d'Industrie Canada, cet émetteur radio ne peut fonctionner à l'aide
d'une antenne d'un type et maximum ( ou moins ) Gain approuvé pour l'émetteur par Industrie Canada.
Pour réduire le risque d'interférence avec d'autres utilisateurs, le type d'antenne et son gain doivent
être choisis afin que la puissance isotrope rayonnée équivalente (PIRE ) ne dépasse pas ce qui est
nécessaire pour une communication réussie .
Cet émetteur radio , IC ID: 11355A-6XYZ000301, a été approuvé par Industrie Canada pour fonctionner
avec l'antenne à bord avec un gain maximum de +4.4dBi . Tous les autres antennes avec un type
différent ou ayant un gain supérieur à 4.4dBi sont strictement interdits pour une utilisation avec cet
appareil. L'impédance d'antenne requise est de 50 ohms.
Attention: Exposition aux radiations de fréquences radio.
Pour se conformer aux normes RSS 102 exigences de conformité d'exposition aux radiofréquences , pour
les configurations mobiles , ce dispositif ne doit pas être colocalisées ou opérant en conjonction avec
une autre antenne ou transmetteur.
Les intégrateurs de systèmes doivent comporter une étiquette avec “Contient IC: 11355A-6XYZ000301”
sur le produit final . Comptes d'utilisateur d'Industrie Canada devraient être fournis en anglais et en
français , au moment où chaque produit est offert à la vente ou la location au Canada.
Intégration dans des hôtes autres que l'hôte approuvé en vertu de la LMA nécessite une coordination
avec JADAK/PRI par un changement permissive classe 2.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 4
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Steve Bryant
Creator                         : Microsoft® Word 2010
Create Date                     : 2017:12:08 16:04:24-05:00
Modify Date                     : 2017:12:08 16:04:24-05:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools