JADAK a business unit of Novanta MERCURY5E RFID module User Manual User man

Download:
Mirror Download [FCC.gov]
Document ID	1708408
Application ID	gHEuMIcaK+SeoCFHFnNffQ==
Document Description	User man.
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.53kB (269182 bits)
Date Submitted	2012-05-29 00:00:00
Date Available	2012-06-19 00:00:00
Creation Date	2012-05-20 11:00:12
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2012-05-22 13:53:27
Document Title	Microsoft Word - UHF Reader LogiRead-UX1 user manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	golank

UHF Reader
LogiRead-UX1
USER MANUAL
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
1/12
LogiTag Systems LTD. www.logi-tag.com
Product
name
p/n
Document
p/n
date
UHF Reader LogiRead-UX1 user manual
LogiRead-UX1
Product rev.
B02
LT-D-0111
Document
rev.
Author name
01
28/03/2012
Documents changes and version
Date
Name
Change description
23/04/2012
Golan K
Document release
Golan K.
version
01
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
2/12
LogiTag Systems LTD. www.logi-tag.com
1. Safety Instructions / Warning - Read before start-up !
• The device may only be used for the purpose intended by the
manufacturer.
• The operation manual should be kept readily available at all times for
each user.
• Unauthorized changes and the use of spare parts and additional
devices which have not been sold or recommended by the
manufacturer may cause fire, electric shocks or injuries. Such
unauthorized measures shall exclude the manufacturer from any
liability.
• The liability-prescriptions of the manufacturer in the issue valid at the
time of purchase are valid for the device. The manufacturer shall not
be held legally responsible for inaccuracies, errors, or omissions in
the manual or automatically set parameters for a device or for an
incorrect application of a device.
• Repairs may only be undertaken by the manufacturer.
• Installation, operation, and maintenance procedures should only be
carried out by qualified personnel.
• Use of the device and its installation must be in accordance with
national legal requirements and local electrical codes.
• When working on devices the valid safety regulations must be
observed.
• This product contains a lithium Polymer (Li-Po) battery. When the
battery reaches the end of its useful life, the spent battery should be
disposed of by a qualified recycler or hazardous materials handler.
Do not mix this battery with the solid waste stream.
• Do not expose to fire or high heat. The device may explode if
disposed of in fire.
• Charge the device only with the allowed adaptor specifications at the
data sheet. Use of higher voltage/current adaptor my cause damage
to the device. Allowed charging temperature is between 0°C to
+45°C
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
3/12
LogiTag Systems LTD. www.logi-tag.com
• Do not drop, throw or try to bend the device.
• Do not immerse in liquid or expose to excess humidity.
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
4/12
LogiTag Systems LTD. www.logi-tag.com
2. System description and operation
The LogiRead-UX1 is UHF RFID Reader, a system for read and write
operations for UHF RFID transponders.
It can be operated by host computer with Bluetooth link support.
The device is powered of rechargeable LI-PO battery, can be charge
either by 5V 3A adaptor or USB connection to host.
Device has power button and Leds indication.
The device can operate at frequency range of between 860-928MHz,
according to local authorizations and federal communications laws.
Reader's maximum transmitting power 30dbm (29.5dbm for USA
approved FCC module).
Transponders reading range up to 3m – depend on size and location
of transponder.
Device enclosure made of Polycarbonate and rubber.
The reader contains:
• UHF RFID module and antenna.
• BT module
• Rechargeable LI-PO battery
• On-off button and led indications
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
5/12
LogiTag Systems LTD. www.logi-tag.com
The system has 2 interface connectors:
•
•
DC power jack for battery charging
Mini USB 5 pin connector for battery charging
2.1 LED Display And Button
Button: to power on/off the device.
Led indicators:
•
•
•
•
PWR – LED is on when device is connected to adaptor or
USB.
BAT – LED is on when device is powered of internal battery.
BT – LED is on when Bluetooth connection established.
RFID – LED is on whenever the device identifies a
transponder.
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
6/12
LogiTag Systems LTD. www.logi-tag.com
Led status table:
Led type and
color
PWR - red
Led
mode
on
blinking
blinking
fast
off
BAT - green
off
BT - blue
RFID - yellow
on
blinking
on
on
Device status
either USB cable or adaptor connect to the
device and battery fooly charged
either USB cable or adaptor connect to the
device and battery is charging
during system power up by pressing the button
device powered of internal battery
either USB cable or adaptor connect to the
device
device powered of internal battery, PWR led is off
battery need to be charged
Bloutooth connection established
device identifies transponder
2.2 Power Supply Connection
•
•
•
•
•
Allowed supply voltage: 5V +/-5%, 3A .Use only certified unit.
System's DC supply connector: male jack size 3.8*1.3mm.
Use of higher supply voltage can damage the system!!
Use only certified class B, LPS power supply device.
While charging the battery or when adaptor connects to the
system do not use it or link to host.
2.3 USB connection for battery charging
Connect to standard USB host that can supply minimum current of
500mA.
2.4 Bluetooth interface
• Standard BT interface, port settings:
• baud rate 115200b/s
• data bits=8
• parity=none
• stop bit=1
• flow control=none
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
7/12
LogiTag Systems LTD. www.logi-tag.com
2.5 RFID transponders
The system supports UHF GEN2 and ISO 18000-6C RFID
transponders.
Transponders reading range up to 3m.
2.6 System operation:
To operate the system:
1. Press the power button; make sure either BAT or PWR led are on.
2. Make sure the BAT led is not blinking. If it blinks – battery is at low
capacity, connect to adaptor or USB cable for charging.
3. Establish BT connection either from PC or PALM computer.
For Palm/Pocket PC perform the following:
•
Open Bluetooth explorer in explorer mode
•
Click “Tool” => “Discover Devices”. Make sure reader is
turned on.
•
Click “View” => “Wizard Mode”
•
If New Connection Wizard doesn’t appear click on “File
=> New Connection”
•
Select “Explore Services on Remote Device”
•
Click Next
•
Select the reader with its BT ID number in the devices
area and click “Next”
•
Type PIN code “1234” and click “OK”
•
Select “At Serial” and click “Next”
•
Select connection favorite options and click “Next”
•
Click “Connect”
•
Select local COM port. Define port settings as mentioned.
Make note of the com you selected. You will have to
define it when you first run an application using the
Portable UHF reader API
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
8/12
LogiTag Systems LTD. www.logi-tag.com
•
Click OK
•
Make sure you disconnect the Bluetooth connection to
the reader before starting an application which tries to
connect with it again.
•
It is recommended to perform a full reset to the pocket
PC after initial definition of the reader Bluetooth port
For PC:
•
Open the BT wizard and search for devices.
•
Select the reader according to its BT ID number.
•
Choose "use the device ID" and insert password 1234
•
Check which COM ports numbers the BT device
received. See at the BT wizard which is the "outgoing"
comport.
•
To activate software, configure comport parameters and
choose the outgoing comport.
4. Place the reader on your belt facing front.
5. Choose command Read tags, and when you are in front of
transponder run the command.
6. If transponder identified the ID number will appear on screen.
7. Repeat the command whenever needed.
8. While the system is at battery charging, do not use it or connect to
pocket PC.
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
9/12
LogiTag Systems LTD. www.logi-tag.com
3. Radio approvals:
3.1 USA (FCC):
Product p/n: LogiRead-UX1-NA
The device includes the following modules:
• Module FCC ID QV5MERCURY5E
• Module FCC ID PI403B
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
• From that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
For help.
Warning:
Changes or modifications to this equipment not expressly approved
by the party responsible for compliance (LogiTag Systems Ltd.) could
void the user’s authority to operate the equipment.
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
10/12
LogiTag Systems LTD. www.logi-tag.com
3.2 EUROPE:
Product p/n: LogiRead-UX1-EU
Product EMC approvals:
• Device certifications: EN301489-1, EN301489-3,
EN301489-17
Modules approvals:
• BT module: EN 300 328 V1.6.1 (2004 – 11);
EN 301 489-1 V1.4.1 (2002 – 08).
• RFID module: EN 302 208-1 V1.1.2;
EN 302 208-2 V1.1.1
3.3 CANADA:
Product p/n: LogiRead-UX1-NA
The device includes the following modules:
• Contains transmitter module IC: 5407A-MERCURY5E
• Contains transmitter module IC: 1931B-EUSB
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
11/12
LogiTag Systems LTD. www.logi-tag.com
4. System Technical data:
•
Mechanical data:
o Dimensions (W/L/H ) 136*85*23.2mm
o Weight 260gr.
•
Electrical data:
o Supply voltage 5V +/-5%, 3A, LPS
o RFID transmitting power 1W max.
•
Interface:
o BT
o USB
•
Supporting transponders:
o UHF EPC GEN2
o ISO 18000-6C
•
Temperature range:
o Battery charging: 0°C to +45°C
o Operation: -20°C to +60°C
o Storage: -20°C to +60°C
o Humidity: 5%-65%
•
Applicable standards:
o Radio – FCC CFR 47 part 15 subpart C, 15.247 and 15.231;
RSS 210.
o EMC :
o EUROPE: EN301489-1; EN301489-3; EN301489-17
o USA/CANADA: 47 CFR part 15 sub B; ICES-003:04
o Safety - EN 60950-1
Tel: 972-9-835-4848 2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel Page
Fax: 972-9-865-6262
12/12
LogiTag Systems LTD. www.logi-tag.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Author                          : golank
Create Date                     : 2012:05:20 11:00:12Z
Modify Date                     : 2012:05:22 13:53:27+03:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : golank
Title                           : Microsoft Word - UHF Reader LogiRead-UX1 user manual.doc
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2012:05:22 13:53:27+03:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:4d39caa2-28c4-4fd5-817c-8aa9a377a669
Instance ID                     : uuid:c56eb002-1c13-4562-abb7-44fad1340e01
Page Count                      : 12

EXIF Metadata provided by EXIF.tools