JBL Bass Pro SL2 Spec Sheet English
Spec Sheet (English) 1 MB JBL_BassPro_SL2_Spec_Sheet_English BassPro SL2 | [Add high-performance bass with a low-profile woofer enclosure, Self-Powered, 8\ (200mm) low-profile under seat subwoofer system]
User Manual: JBL BassPro SL2 | [Add high-performance bass with a low-profile woofer enclosure, Self-Powered, 8\ (200mm) low-profile under seat subwoofer system]
Open the PDF directly: View PDF 
.
Page Count: 2
Features
Proprietary, shallow-profile woofer
Efficient Class D amplifier
Intelligent electronic design
Crossover control
Flexible EQ adjustments
Line- and high-level inputs
Wired, remote level control capability
Make your drivers seat the best seat in the house.
The BassPro SL2 self-powered subwoofer fits under the front seat of many vehicles, and
adds deep full rich bass to your existing audio system. Its shallow-profile, 8" woofer is
coupled with a custom tuned enclosure and is driven by a powerful Class D digital amplifier
which making it a powerful solution. A fully variable crossover and Bass EQ are on-board to
tune the BassPro SL2 to your system.
Self-powered, 8" (200mm) low-profile underseat vehicle subwoofer system
BassPro SL2
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.jbl.com
© 2019 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN
International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications
and appearance are subject to change without notice.
What’s in the box:
1 powered woofer enclosure
4 mounting screws
Owner’s manual
Remote Bass Level Control
Technical Specifications
Woofer: 8" (200mm)
Amplifier Power: 125W RMS
Frequency Response: 35Hz – 120Hz
Fuse: 15A
Maximum Current Draw: 12A
Quiescent Current Draw: <800mA
Input Sensitivity: 0.05V – 2V Line-Level Input;
0.5V – 20V High-Level Input
Crossover Frequency: 50Hz – 120Hz
Crossover Slope: 12dB/octave
Bass Boost: 0dB to +9dB @ 70Hz
Dimensions (L x W x H):
13-9/16" x 9-7/8" x 2-13/16"
(344mm x 250mm x 71mm)
Features and Benefits
Proprietary, shallow-profile woofer
The 8" (200mm) woofer in the BassPro SL2 is designed specifically to provide low distortion and
great bass performance in an ABS enclosure with a remarkably compact footprint.
Efficient Class D amplifier
The amp that powers the BassPro SL2 produces minimal heat, and it doesn’t require a lot of current
from the car’s electrical system.
Intelligent electronic design
The BassPro SL2 employs high-pass filters and limiters that deliver exceptional at-the-limits
performance.
Crossover control
A manual crossover control (50Hz – 120Hz) lets you adjust how much upper bass and mid-bass the
BassPro SL2 produces. Fine-tune the crossover to achieve a smooth transition from the BassPro SL2
to the rest of the system’s speakers.
Flexible EQ adjustments
Level control adjusts the BassPro SL2’s volume to the other speakers in your system, while Bass
Boost control lets you minimize peaks or dips in bass frequencies in your car’s acoustic environment.
Line- and high-level inputs
For added installation flexibility, the BassPro SL2 features both line- and high-level inputs. If you use
the high-level inputs to connect the BassPro SL2 to the head unit, an input load switch lets you switch
from “Low” to “High” to achieve optimum results.
Wired, remote level control capability
The BassPro SL2 is compatible with the JBL GTO-RBC included, which enables you to control the
bass level remotely.
BassPro SL2
Self-powered, 8" (200mm) low-profile underseat vehicle subwoofer system
