JBL Party Box On The Go Owner's Manual EN

JBL_PartyBox On-The-Go_Owner's Manual_EN JBL PartyBox On-The-Go | Portable party speaker with built-in lights and wireless mic

User Manual: JBL JBL PartyBox On-The-Go | Portable party speaker with built-in lights and wireless mic

Open the PDF directly: View PDF .
Page Count: 17

PARTYBOX ON-THE-GO

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

For all products:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not block any ventilation openings. Install this apparatus

in accordance with the manufacturer’s instructions.

6. Do not install this apparatus near any heat sources such as

radiators, heat registers, stoves or other apparatus (including

ampliers) that produce heat.

7. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider

than the other. A grounding-type plug has two blades and

a third grounding prong. The wide blade or the third prong

is provided for your safety. If the provided plug does not t

into your outlet, consult an electrician for replacement of the

obsolete outlet.

8. Protect the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles and the point

where they exit from the apparatus.

9. Use only attachments/accessories specied by the

manufacturer.

10. Use only with the cart, stand, tripod, bracket or

table specied by the manufacturer or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination

to avoid injury from tip-over.

11. Unplug this apparatus during lightning storms or when

unused for long periods of time.

12. To disconnect this apparatus from the AC mains completely,

disconnect the power-supply cord plug from the AC

receptacle.

13. The mains plug of the power-supply cord shall remain readily

operable.

14. Do not expose batteries to excessive heat such as sunshine,

re or the like.

15. This apparatus is intended to be used only with the power

supply and/or charging cable provided by the manufacturer.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN

EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE

PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE"WITHIN THE

PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO

CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS

INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT

OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE

LITERATURE ACCOMPANYING THE PRODUCT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

Caution FCC and IC statement for users (USA and

Canada only)

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

CAN ICES-3(B)/NMB-3(B)

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

Caution: Changes or modications not expressly approved

by HARMAN could void the user’s authority to operate the

equipment.

For Products That Transmit RF Energy

FCC AND IC INFORMATION FOR USERS

This device complies with Part 15 of the FCC rules and Industry

Canada license-exempt RSS standard(s). Operation is subject

to the following two conditions: (1) This device may not cause

harmful interference; and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

FCC/IC Radiation Exposure Statement

This equipment complies with FCC/IC RSS-102 radiation

exposure limits set forth for an uncontrolled environment.

FCC Caution:

High power radars are allocated as primary users of the 5.25 to

5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations

can cause interference with and/or damage this device. No

conguration controls are provided for this wireless equipment

allowing any change in the frequency of operations outside the

FCC grant of authorization for US operation according to Part

15.407 of the FCC rules.

www.jbl.com

English

IC Caution:

User should also be advised that:

(i) The device for operation in the band 5150-5250 MHz is only

for indoor use to reduce the potential for harmful interference to

co-channel mobile satellite systems; (ii) the maximum antenna

gain permitted for devices in the bands 5250-5350 MHz and

5470-5725 MHz shall comply with the e.i.r.p. Limit: and (iii)

The maximum antenna gain permitted for devices in the band

5725-5825 MHz shall comply with the e.i.r.p. Limits specied for

point-to-point and non-point-to-point operation as appropriate.

(iv) Users should also be advised that high-power radars are

allocated as primary users (i.e. priority users) of the bands 5250-

5350 MHz and 5650-5850 MHz and that these radars could

cause interference and/or damage to LE-LAN devices.

Exposure of humans to RF ﬁelds (RSS-102)

The computers employ low gain integral antennas that do not

emit RF eld in excess of Health Canada limits for the general

population; consult Safety Code 6, obtainable from Health

Canada’s Website at http://www.hc-sc.gc.ca/

The radiated energy from the antennas connected to the wireless

adapters conforms to the IC limit of the RF exposure requirement

regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted

using recommended operating positions accepted by the FCC/

RSS with the device transmitting at its highest away from the

body. Non-compliance with the above restrictions may result in

a violation of FCC RF exposure guidelines.

Use Restriction: Attention in France, the operation is limited to

indoor use within the band 5150-5350 Mhz.

For Products with Radio Receivers That Can

Use an External Antenna (USA ONLY)

CATV (Cable TV) or Antenna Grounding

If an outside antenna or cable system is connected to this

product, be certain that it is grounded so as to provide some

protection against voltage surges and static charges. Section

810 of the National Electrical Code (NEC), ANSI/NFPA No. 700-

1984, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes

and requirements of the electrode.

Note to CATV System Installer

This reminder is provided to call the CATV(cable TV) system

installer’s attention to article 820-40 of the NEC, which provides

guidelines for proper grounding and, in particular, as close to the

point of cable entry as possible.

Caution: This product uses a laser system. To prevent direct

exposure to the laser, do not open the cabinet enclosure or defeat

any of the safety mechanisms provided for your protection. Do

NOT START INTO THE LASER BEAM. To ensure proper use of

this product, please read the owner’s manual carefully and retain

it for future use. Should the unit require maintenance or repair,

please contact your local JBL service. Refer servicing to qualied

personnel only.

FOR ALL EU COUNTRIES

For products that include audio out

Prevention of hearing loss

Caution: Permanent hearing loss may occur

if earphones or headphones are used at high

volume for prolonged periods of time.

For France, the products have been tested to

comply with Sound Pressure Level requirement

laid down in the applicable NF EN 50332 L.5232-1.

Note:

– To prevent possible hearing damage, do not listen to high volume

levels for long periods.

WEEE Notice

The Directive on Waste Electrical Equipment (WEEE), which

entered into force as European law on 14/02/2014, resulted in

a major change in the treatment of electrical equipment at end-

of-life.

The purpose of this Directive is, a rst priority, the prevention of

WEEE, and in addition, to promote the reuse, recycling and other

forms of recovery of such wastes as so as to reduce disposal.

The WEEE logo on the product or on its box indicating collection

for electrical and electronic equipment consists of the crossed-

out wheeled bin, as shown below.

This product must not be disposed of or dumped with

your other household waste. You are liable to dispose

of all your electronic or electrical waste equipment by

relocating over to the specied collection point for

recycling of such hazardous waste. Isolated collection

and proper recovery of your electronic and electrical waste

equipment at the time of disposal will allow us to help conserving

natural resources. Moreover, proper recycling, and collection

points, please contact your local city center, household waste

disposal service, shop from where you purchased the equipment,

or manufacturer of the equipment.

RoHS Compliance

This product is in compliance with Directive 2011/65/EU of the

European Parliament and of the Council of 8 June 2011 on the

restriction of the use of certain hazardous substances in electrical

and electronic equipment.

For All Products Except Those with Wireless

Operation

HARMAN International hereby declares that this equipment is in

compliance with EMC 2014/30/EU Directive, LVD 2014/35/EU

Directive. The declaration of conformity may be consulted in the

support section of our Web Site, accessible from www.jbl.com.

For All Products with Wireless Operation

HARMAN International hereby declares that this equipment

is in compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU. The declaration of

conformity may be consulted in the support section of our Web

Site, accessible from www.jbl.com.

For Products that includes Batteries

EU Batteries Directive 2013/56/EU

A new battery directive 2013/56/EU on Battery and Accumulator

replacing directive entered into force on the 01/07/2015. The

directive applies to all types of batteries and accumulator

(AA, AAA, button cells, rechargeable packs) including those

incorporated into appliances except for military, medical

and power tool applications. The directive sets out rules for

collection, treatment, recycling and disposal of batteries, and

aims to prohibit certain hazardous substances and to improve

environmental performance of batteries and all operators in the

supply chain.

Instructions for Users on Removal, Recycling and

Disposal of Batteries

The remove the batteries from your equipment or remote control,

reverse the procedure described in the owner’s manual for

inserting batteries. For products with a built-in battery that lasts

for the lifetime of the product, removal may not be possible for

the user. In this case, recycling or recovery, it becomes necessary

to replace such a battery, this procedure must be performed by

authorized services centers. In the European Union and other

locations, it is illegal to dispose of any battery with household

trash. All batteries must be disposed of in an environmentally

sound manner. Contact your local waste-management ofcials

for information regarding the environmentally sound collection,

recycling and disposal of used batteries.

WARNING: Danger of explosion if battery is incorrectly replaced.

To reduce risk of re or burns, don’t disassemble, crush,

puncture, short external contact, expose to temperature above

60°C (140°F), or dispose of in re or water. Replace only with

specied batteries. The symbol indicating ‘separate collection’

for all batteries and accumulators shall be crossed-out wheeled

bin shown below:

In case of batteries, accumulators and button cells containing

more than 0.0005 mercury, more than 0.002% cadmium or more

than 0.004% lead, shall be marked with the chemical symbol for

the metal concerned: Hg,Cd or Pb respectively. Please Refer to

the below symbol:

WARNING: DO NOT INGEST BATTERIES, CHEMICAL BURN

HAZARD [the remote supplied with] This product contains a coin/

button cell battery. If the coin/button cell battery is swallowed, it

can cause severe international burns in just 2 hours and can lead

to death. Keep new and used batteries away from children. If you

think batteries might have been swallowed or placed inside any

part of body, seek immediate medical attention.

www.jbl.com

English

9. SPECIFICATIONS 14

10. TROUBLESHOOTING 15

11. COMPLIANCE 15

12. TRADEMARK 16

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS 2

1. INTRODUCTION 6

2. WHAT’S IN THE BOX 6

3. PRODUCT OVERVIEW 7

3.1 TOP PANEL 7

3.2 BACK PANEL 7

4. PLACEMENT 8

5. POWER ON 8

6. USING YOUR PARTYBOX 9

6.1 BLUETOOTH CONNECTION 9

6.2 USB CONNECTION 9

6.3 AUX CONNECTION 10

6.4 MUSIC CONTROL 10

6.5 MIXING SOUND WITH A MICROPHONE AND /

OR GUITAR 10

6.6 CHARGING YOUR MOBILE DEVICE 12

7. CARRYING YOUR PARTYBOX 12

8. ADVANCED USAGE 13

8.1 LIGHT EFFECT 13

8.2 TWS MODE 13

8.3 FACTORY RESET 13

8.4 IPX4 14

2. WHAT’S IN THE BOX

2 3

JBL PARTYBOX ON-THE-GO

Bluetooth

BASS

TREBLE

BASS

BOOST

1) Main unit

2) Wireless microphone (with two Alkaline AA batteries)*

3) Microphone pouch

4) Shoulder strap

5) Power cord*

6) Quick Start Guide, Safety Sheet, Warranty Card

*Power cord quantity, plug type and microphone quantity vary

by regions.

1. INTRODUCTION

Congratulations on your purchase! This manual includes

information about speakers. We

encourage you to take a few minutes to read this manual, which

describes the product and includes step-by-step instructions to

help you to set up and get started. Read and understand all the

safety instructions before using your product.

If you have any questions about these products, their installation

or their operation, please contact your retailer or customer

service, or visit us at www.jbl.com.

www.jbl.com

English

3. PRODUCT OVERVIEW

3.1 Top Panel

MIC2 /

GUITAR

BASS

TREBLE

BASS

BOOST

1011121315 1417 16

1 2 65 7 8 93 4

BASS

TREBLE

BASS

BOOST

• Enhances the bass level: level 1, level 2, or off.

2) /

• Adjust main volume.

3) volume

• Adjust microphone volume (if connected).

4) volume

• Adjust guitar volume (if connected).

• Turn the power on or off.

• Battery level indicator

• Press to switch between different light patterns.

8) Mobile device dock

9) Shoulder strap hooks

10) input

• : Connect to a guitar.

• : Adjust the guitar gain.

11)

• Press to enter Bluetooth pairing mode.

• Press and hold for more than 5 seconds to enter True

Wireless Stereo (TWS) pairing mode.

• Press and hold for more than 20 seconds to forget all

paired devices.

12)

• Adjust the bass level.

13)

• Adjust the treble level.

14) LED ring

15)

• Adjust the echo level.

16)

• Play, pause or resume.

17) MIC input

• Microphone socket: Connect to a microphone.

• : Adjust the microphone gain.

Caution:

– Do not look directly at the light-emitting parts when the speaker

lights are turned on.

LED behavior

Solid white Power on

Solid amber Standby

Off Power off

Flashing white

quickly Pairing

White (Constant) Connected

Off Not connected

Solid white On

Off Off

Flashing red

quickly Low battery

Flashing white

slowly Charging

Solid white

The speaker is fully

charged when all

the ve indicators

turn solid white.

3.2 Back Panel

2 31

1) (AC)

• Connect to AC power supply.

2) (USB)

• Connect to a USB storage device.

• Charge your mobile device.

3) (AUX)

• Connect to an external audio device through a 3.5 mm

audio cable (not supplied).

4. PLACEMENT

Caution:

– Do not sit on the speaker or push it. Otherwise, it may result in

malfunction and cause personal injury and /or property damage.

Place the speaker on a at, stable surface and ensure that the

rubber feet side is down.

5. POWER ON

Cautions:

– Use the provided power cord only.

– You can use either AC power or the built-in battery as power

supply to the speaker.

OFF

<15%

15% - 80%

>80%

1. Connect AC power.

• To use the built-in battery, disconnect AC power after

charging the speaker.

2. Press to power on.

Tips:

– Fully charge the speaker before rst-time use to prolong the

lifespan of the built-in battery.

– To protect battery lifespan, fully charge at least once every

3 months. Battery life will vary due to usage patterns and

environmental conditions.

– You can check the battery level by pressing any button on the

speaker.

– The speaker switches to standby mode automatically after 20

minutes of inactivity. You can press on the speaker to switch to

normal operation.

www.jbl.com

English

6. USING YOUR PARTYBOX

Notes:

– Only one sound source can be played at a time. The priority order

is USB -> Bluetooth -> AUX.

– Starting a source with higher priority will always interrupt a source

with lower priority.

– To start a source with lower priority, stop the source with higher

priority rst.

6.1 Bluetooth Connection

You can use the speaker with your Bluetooth enabled smartphone

or tablet.

x 1

BASS

TREBLE

BASS

BOOST

DEVICES

JBL PARTYBOX ON-THE-GO

Bluetooth

< 10 m (33 ft)

1. Press on the speaker to enter Bluetooth pairing mode.

2. Choose “ ” on your Bluetooth

device to connect.

3. Once successfully connected, you can stream audio from

your Bluetooth device to this speaker.

Notes:

– This speaker can memorize a maximum of 8 paired devices. The

ninth paired device will replace the rst one.

– Enter “0000” if a PIN code is requested for connection to a

Bluetooth device.

– Bluetooth performance can be affected by the distance between

this product and your Bluetooth device and the environment of

operation.

To terminate the Bluetooth-enabled device:

• Turn off this speaker, or

• Disable Bluetooth on your device.

To reconnect the Bluetooth enabled device:

• When you turn on this speaker next time, it tries to reconnect

the last connected device automatically.

• If not, manually select “ ” on

your Bluetooth device to connect.

6.2 USB Connection

BASS

BOOST

Plug a USB storage device that contains playable audio contents

into the USB port of the speaker.

JAudio playback will start automatically.

Tip:

– The speaker plays audio les on the USB storage device from the

root folder to the last level of subfolders in alphabetical sequence.

Up to 8 levels of subfolders are supported.

Supported audio formats

Extension Codec Sample rate Bitrate

WAVE PCM 44.1KHz ~ 192KHz < 5Mbps

LPCM

44.1KHz ~ 192KHz

< 5Mbps

IMA_

ADPCM

44.1KHz ~ 192KHz

< 5Mbps

MPEG

44.1KHz ~ 192KHz

< 5Mbps

MULAW

44.1KHz ~ 192KHz

< 5Mbps

MP3 MPEG1

layer1/2/3

32KHz ~ 48KHz 32Kbps ~

320Kbps

MPEG2

layer1/2/3

16KHz ~ 24KHz 8Kbps ~

160Kbps

MPEG2.5

layer3

8KHz ~12KHz 8Kbps ~

160Kbps

WMA ≤ 320Kbps 8Kbps ~

48Kbps

1010

6.3 AUX Connection

1. Connect an external audio device to the speaker through a

3.5 mm audio cable (not supplied).

2. Start audio playback on the external device.

6.4 Music Control

BASS

TREBLE

BASS

BOOST

x 1

x 2

x 3

x 1

• Press once to pause or resume playback.

• Press twice to skip to the next track.

• Press three times to skip to the previous track.

• Press +/- to increase or decrease main volume.

• Hold the + and - buttons simultaneously to mute or unmute sound

output.

Note:

– The skip operation is unavailable in AUX mode.

6.5 Mixing Sound with a Microphone and /

or Guitar

By using a microphone or electric guitar (not supplied), you can

mix sound with an audio source.

Notes:

– Always set the guitar or microphone volume to the minimum level

before guitar or microphone connection / disconnection.

– Always disconnect the guitar or microphone when you are not

using them.

1111

www.jbl.com

English

6.5.1 Connecting a Microphone

To connect the supplied wireless microphone

By default, the wireless microphone comes pre-paired with the

speaker at factory.

GUITAR

BASS

TREBLEECHO

GUITAR

MIC

BASS

BOOST

CH1 CH2... CH6

x 1

< 10 m (33 ft)

1. Load the two Alkaline AA batteries with correct polarity.

2. Turn on the speaker and supplied wireless microphone

successively.

JWireless connection will be set up automatically.

Notes:

– The microphone powers off automatically after 10 minutes of

inactivity.

– A maximum of two wireless microphones are supported. Contact

your dealer for how to purchase more.

To connect a wired microphone (not supplied)

BASS

TREBLE

BASS

BOOST

To connect a new wireless microphone

1. Turn off the speaker.

2. Turn on the new wireless microphone and place it on the top

of the speaker.

3. Turn on the speaker.

JThe microphone will pair and connect with the speaker

automatically within 3 minutes.

To replace wireless microphone batteries

Cautions:

– Do not mix batteries (old and new or carbon and alkaline, etc.).

– Remove batteries if they are exhausted or if the microphone is not

to be used for a long time.

– Batteries contain chemical substances, they should be disposed of

properly.

1. Check the battery level.

100%

<5%

2. If the battery level is low, replace the old batteries with new

ones.

1212

6.5.2 Connecting a Guitar

MIC2 /

GUITAR

BASS

TREBLE

BASS

BOOST

6.5.3 Mixing Sound

Sing through the microphone or play guitar.

• To adjust the volume of the audio source, press .

• To adjust the volume of the microphone or guitar, rotate the

or volume knob.

• To adjust the gain of the wired microphone or guitar, rotate

the control beside the or

socket respectively.

• To adjust the echo, treble and bass level of the microphone

(either wireless or wired), rotate the , and

knob respectively.

6.6 Charging Your Mobile Device

BASS

TREBLE

7. CARRYING YOUR PARTYBOX

Cautions:

– Before carrying the speaker, ensure that all the cords are

disconnected.

– To avoid personal injury and/or property damage, hold the product

rmly while carrying, and while it is not being used, remove the

strap.

Use the supplied shoulder strap to carry the speaker on the go.

1313

www.jbl.com

English

8. ADVANCED USAGE

8.1 Light Effect

x 1

Press to select your preferred light effect: rock, neon, club,

or off.

8.2 TWS Mode

You can connect two PARTYBOX speakers to each other via

TWS mode.

BASS

TREBLE

BASS

BOOST

< 10 m (33 ft)

BASS

TREBLE

BASS

BOOST

Hold on both speakers simultaneously for more than 5 seconds.

To exit TWS mode:

Power off or hold on either speaker for more than 5 seconds.

Tips:

– It may be necessary to forget the PARTYBOX on the source device

in order to reconnect to Bluetooth.

– By default, the speaker connected to your Bluetooth device acts as

the primary speaker (left channel), while the other one acts as the

secondary speaker (right channel).

8.3 Factory reset

To restore the factory settings, hold and for more than 10

seconds.

1414

9. SPECIFICATIONS

Product name:

AC power input: 100 - 240 V ~ 50/60 Hz

Built-in Battery: 18 Wh

Power consumption: 60 W

Total output power: 100 W RMS (AC powered)

50 W RMS (battery powered)

Standby power

consumption:

< 2 W with Bluetooth

connection;

< 0.5 W without Bluetooth

connection

USB output: 5 V 2.1 A

Speaker drivers:

1 x 5.25 in (133 mm) woofers +

2 x1.75 in (44 mm) tweeters

Signal-to-noise (S/N) ratio:

> 80 dBA

Frequency response: 50 Hz - 20 kHz

Battery charge time: < 3.5 hrs

Battery play time: > 6 hrs

Bluetooth version: 4.2

Bluetooth prole: A2DP v1.3, AVRCP v1.6

Bluetooth transmitter

frequency range: 2.4 - 2.48 GHz

Bluetooth maximum

transmitter power: 10 dBm (EIRP)

Bluetooth transmitter

modulation: GFSK, π/4 DQPSK, 8DPSK

Bluetooth range: Approx. 10 m (33 ft)

USB format: FAT 16, FAT 32

USB le format: .mp3, .wma, .wav

Digital input: Bluetooth / USB -9 dBFS

Input sensitivity: AUX in: 370 mV rms

Microphone: 20 mV

Guitar: 100 mV

Product Dimension

(W x H x D):

490 x 245 x 228 mm /

19.3 x 9.6 x 9.0 in

Net weight: 7.5 kg / 16.5 lbs

Wireless microphone spec

Frequency response: 65 Hz - 15 kHz

Signal-to-noise (S/N) ratio:

> 60 dBA

UHF frequency band: 470 ~ 960 MHz (depends on

SKU) (EU 657 ~ 662 MHz)

Transmitter transmitting

power: < 10 mW

Microphone battery play

time: < 10 hrs

Distance between

transmitter and receiver: < 10 m

8.4 IPX4

Caution:

– Always keep the charging port dry before connecting AC power.

– To ensure splash resistance, always keep the protective covers

closed securely.

The speaker is IPX4 splash resistant.

x 1

1515

www.jbl.com

English

11. COMPLIANCE

The product is in compliance with the European Union energy

legislation.

Bluetooth connection mode

The product is intended to be used for streaming music via

Bluetooth connection. A consumer can stream Bluetooth

audio to the speaker. When the product is connected through

Bluetooth, the Bluetooth connection must remain active at all

times to ensure proper operation.

The product will enter sleep mode (networked standby) after

20 minutes without operation. The power consumption in sleep

mode is less than 2.0 Watts, after which it can be re-activated

via Bluetooth connection.

Bluetooth disconnection mode

The product will enter standby mode after 20 minutes without

operation. The power consumption in standby mode is less than

0.5 Watts.

10. TROUBLESHOOTING

Caution:

– Never try to repair the product by yourself. If you have any

problems while using this product, check the following points

before you request service.

System

The speaker will not turn on.

• Ensure that the speaker battery is not drained. If not, use the

AC power instead.

No response from some buttons

• The product may be in demo mode. In demo mode, all the

input sources and buttons except / / / / are

disabled. Hold and simultaneously for more than 5

seconds to exit demo mode.

Sound

No sound from the speaker.

• Ensure that the speaker is powered on.

• Adjust volume.

• Ensure that a sound source is active and not muted.

Bluetooth

A device cannot connect with the speaker.

• Ensure that the Bluetooth function of the device is enabled.

• The speaker is already connected with another Bluetooth

device. Hold on the speaker for more than 20 seconds to

disconnect and pair with a new device.

Poor audio quality from a connected Bluetooth

device

• The Bluetooth reception is poor. Move the device closer to

the speaker, or remove any obstacle between the device and

speaker.

Wireless microphone

No response from the microphone.

• Power on the microphone.

• Replace batteries if the battery level is low.

• Pair the microphone with the speaker manually (see 6.5.1

Connecting a Microphone).

1616

Este produto está homologado pela Anatel, de acordo com os

procedimentos regulamentados para avaliação da conformidade

de produtos para telecomunicações e atende aos requisitos

técnicos aplicados.

Para maiores informações, consulte o site da Anatel –

www.anatel.gov.br

Este equipamento não tem direito à proteção contra interferência

prejudicial e não pode causar interferência em sistemas

devidamente autorizados.

12. TRADEMARK

The Bluetooth® word mark and logos are registered trademarks

owned by Bluetooth SIG, Inc. and any use of such marks by

HARMAN International Industries, Incorporated is under license.

Other trademarks and trade names are those of their respective

owners.

Торговая марка: JBL

Назначение товара: Активная акустическая система

Изготовитель: Харман Интернешнл Индастриз Инкорпорейтед, США, 06901 Коннектикут, г.Стэмфорд, Атлантик Стрит

400, офис 1500

Страна происхождения: Китай

Импортер в Россию: OOO “ХАРМАН РУС СиАйЭс“, Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1

Гарантийный период: 1 год

Информация о сервисных центрах: www.harman.com/ru тел. +7-800-700-0467

Срок службы: 5 лет

Товар сертифицирован

Дата производства: Дата изготовления устройства определяется по двум буквенным обозначениям из второй группы

символов серийного номера изделия, следующих после разделительного знака «-». Кодировка

соответствует порядку букв латинского алфавита, начиная с января 2010 года: 000000-MY0000000, где

«M» - месяц производства (А - январь, B - февраль, C - март и т.д.) и «Y» - год производства (A - 2010, B -

2011, C - 2012 и т.д.).

Используйте устройство только по прямому назначению в соответствии с предоставленной инструкцией. Не пытайтесь самостоятельно

вскрывать корпус товара и осуществлять ремонт. В случае обнаружения недостатков или дефектов, обращайтесь за гарантийным

обслуживанием в соответствии с информацией из гарантийного талона. Особые условия хранения, реализации и (или) транспортировки

не предусмотрены. Избегайте воздействия экстремальных температур, долговременного воздействия влаги, сильных магнитных полей.

Устройство предназначено для работы в жилых зонах. Срок годности не ограничен при соблюдении условий хранения. Пожалуйста, не

утилизируйте устройства с литий-ионными аккумуляторами вместе с бытовыми отходами.

HARMAN International Industries,

Incorporated 8500 Balboa

Boulevard, Northridge, CA 91329

USA

www.jbl.com

of HARMAN International Industries, Incorporated, registered in the United States and/or other

countries. Features, specications and appearance are subject to change without notice.

JBL Party Box On The Go Owner's Manual EN