JBL LSR2300 Bro 082109 Web
User Manual: JBL JBL - Manuals+
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
t, LSR2300.Bro.082109.qxd 8/21/09 STUDIO 4:19 PM Page 3 MONITORS LSR2300.Bro.082109.qxd 8/21/09 4:19 PM Page 4 Professional. Just became more attainable. Two-Way 5" Bi-Amplified Studio Monitor Two-Way 8" Bi-Amplified Studio Monitor Powered 10" Subwoofer Monitor System Controller with RMC™ Room Mode Correction Subwoofer shown with protective grille removed Legendary JBL Sound For over 60 years JBL has been at the forefront of innovation and design. Our commitment to pushing the boundaries of acoustical engineering, and research about the way people listen has set the benchmark for an entire industry. We're not done yet. We work tirelessly to develop new products that raise the bar for performance, that are also more durable, reliable and engineered to inspire creativity, and make mixing a pleasure. The LSR2300 Series is born of the same expertise, inspiration and spirit of innovation. LSR2300.Bro.082109.qxd 8/21/09 4:19 PM Page 1 LSR2325P Professional H A R D W A R E Each LSR2300 Model is equipped with a compliment of professional features for use in a wide range of applications. MSC1 Controller Added to a stereo system, the LSR2310SP Powered Studio Subwoofer extends the low frequency response of the system below 30Hz. In a surround sound system the sub provides stunning reproduction of the LFE (low frequency effects) channel. The LSR2310SP is packed with professional features including two sets of balanced XLR, 1/4" (6.5 mm) and unbalanced Phono (RCA) input connectors, selectable crossover settings and two sets of balanced outputs to allow connection of Left and Right main speakers. A detented level control allows independent adjustment of the subwoofer output to balance the subwoofer in the system. LSR2310SP LSR2328P The LSR2325P and LSR2328P Bi-Amplified Two-Way Models include balanced XLR, balanced 1/4" (6.5 mm) TRS, and RCA unbalanced input connectors to allow connection of professional mixing consoles, computer audio interfaces, audio visual equipment, and consumer audio systems. A detented level control allows fine adjustment of individual speaker levels to balance each speaker in the system. Low Frequency and High Frequency Trim controls let you tailor the speaker’s response to preference or room acoustics. A neoprene rubber pad on the bottom of the speaker provides acoustic isolation and increases stability when the speaker is placed on a speaker stand or a console top. Mounting points are included and the enclosure has been reinforced for safe mounting using industry-standard mounting hardware. Caution: U be done b by the ma Specificat More © 200 LSR2300.Bro.082109.qxd 8/21/09 4:20 PM Page 5 The Hallmark of a Great Studio Monitor: JBL LSR DESIGN FOR SONIC ACCURACY While most manufacturers take only a single on-axis measurement of the speaker’s performance, this doesn’t tell how it will sound in a room. JBL’s LSR design criteria requires seventy measurements yielding more than 1,200 times more data, enabling JBL to engineer a speaker system that sounds right and is accurate in any room. A trademark of LSR Design is the custom waveguide that delivers superior imaging and smoother frequency response to your listening position. HIGH OUTPUT Each model in the LSR2300 line produces exceptional sound pressure level (SPL) through JBL-engineered high-sensitivity transducers, high-output amplifiers and careful attention paid to the thermal properties of the system. Since heat is the enemy of output, JBL developed a low frequency port that doubles as a means of cooling the amplifier output devices. Before becoming a production-ready design, every LSR2300 model survives the JBL Power Test in which the speaker must play at full rated output for 100 hours continuously, without failure. EXCEPTIONAL BASS RESPONSE Today’s music styles, film production and the demand for high-quality audio for HDTV require a monitor system capable of extended low frequency performance. To address this, JBL engineered new long-excursion transducers with high-flux motors. A custom tuned port works in concert with the transducers to produce deep and accurate low-frequency response, previously unavailable at this price point. t LSR2300.Bro.082109.qxd 8/21/09 4:20 PM THREE STEPS To The Perfect Mix Page 6 Now it’s possible to have a monitor system that eliminates the guess-work so you can create perfect mixes time after time. Just follow these three steps: 1 Take home a set of JBL LSR2300 Studio Monitors with exceptional in-room accuracy. 2 “Tune your room” with the JBL MSC1 Monitor System Controller. 3 Sit down and “Mix Your Best.” RMC ™ ROOM MODE CORRECTION Unless your room was professionally designed, it’s likely your work-space suffers from the effect of Room Modes: low frequency resonance that causes even the most experienced mix engineer to misjudge bass in the mix. The MSC1 Monitor System Controller includes JBL’s highly acclaimed RMC Room Mode Correction Technology that measures and automatically tunes the LSR2300 speakers to your room. The end-result is a calibrated reference environment in which the speakers and the room work in harmony to eliminate any guesswork. POWERED STUDIO SUBWOOFER With a high-excursion 10" (254 mm) woofer, and 180 Watt Amplifier, the LSR2310SP produces deep, powerful bass and extends the low frequency response of your system into the 20 Hz range. The included metal grille protects against potential damage to the woofer when the sub placed beneath a work station. MONITOR SYSTEM CONTROLLER with RMC ™ Room Mode Correction The MSC1 combines essential monitor system features and JBL’s ingenious RMC technology to control your LSR system and tune it to overcome low frequency problems in the room. The MSC1 is packed with features found on professional mixing consoles including: Master Volume Control • A/B Speaker Select • A/B/C input Source Select Subwoofer Output with Level Control and Selectable Cross Over Frequencies • Adjustable Low Frequency and High Frequency Speaker EQ • Headphone Output with Volume Control • Mute Control • RMC On/Bypass Control • RMC Calibration Microphone • MSC1 Control Center Software • • MSC1 sold separately LSR2300.Bro.082109.qxd 8/21/09 4:19 PM STANDARD MODELS Page 2 DESCRIPTION LSR2325P System Type Drivers (LF / HF) Magnetic Shielding Level Control LF Trim HF trim Input Connectors Frequency Range Amplifier Power Max SPL Continous Max SPL Peak Input Sensitivity Crossover Frequency Enclosure Mounting Finish Dimensions (H x W x D) Net Weight LSR2310SP LSR2328P System Type Drivers (LF / HF) Magnetic Shielding Level Control LF Trim HF trim Input Connectors Frequency Range Amplifier Power Max SPL Continous Max SPL Peak Input Sensitivity Crossover Frequency Enclosure Mounting 5" (132 mm) Two-Way Bi-Amplified Powered Studio Monitor 5" (132 mm) 235G / 1" (25 mm) 231H Yes Yes + 2 dB / -3 dB + 2.5 dB / - 2.5 dB Balanced XLR, 1/4" (6.5 mm) TRS, Phono (RCA) 43 Hz - 20 kHz LF/HF: 55 W / 35 W Each / Pair: > 101 dB / > 107 dB Each / Pair: > 112 dB / > 118 dB 92 dB SPL / 1m @ -10 dBV Bal Input 1.7 kHz 4th-order Acoustic Linkwitz-Riley 5/8” (15 mm) MDF 4 threaded mounting points conforming to Industry-standard pattern, 107.9 x 50.8 mm (4.25 x 2.00 in) center to center. M6 metric threads. Metallic Anthracite Paint / Dark Matte Black PVC 303 mm x 187 mm x 258 mm (11.9 in x 7.4 in x 10 in) 7.7 kg (16 lb) Finish Dimensions (H x W x D) Net Weight 8" (203 mm) Two-Way Bi-Amplified Powered Studio Monitor 8" (203 mm) 238G / 1" (25 mm) 231H Yes Yes + 2 dB / -3 dB + 2.5 dB / - 2.5 dB Balanced XLR, 1/4" (6.5 mm) TRS, Phono (RCA) 37 Hz - 20 kHz LF/HF: 95 W / 70 W Each / Pair: > 104 dB / > 110 dB Each / Pair: > 117 dB / > 123 dB 92 dB SPL / 1m @ -10 dBV Bal Input 2.0 kHz 4th-order Acoustic Linkwitz-Riley 3/4 in (18 mm) MDF 4 threaded mounting points conforming to Industry-standard pattern, 107.9 x 50.8 mm (4.25 x 2.00 in) center to center. M6 metric threads. Metallic Anthracite Paint / Dark Matte Black PVC 397 mm x 254 mm x 335 mm (15.6 in x 10 in x 13.2 in) 12.7 kg (28 lb) System Type Drivers (LF) Magnetic Shielding Level Control Input Connectors Output Connectors Frequency Range Selectable Crossover Amplifier Power Max SPL Continous Max SPL Peak Input Sensitivity Enclosure Finish Dimensions (H x W x D) Net Weight 10" (254 mm) Powered Studio Subwoofer 10" (254 mm) 230H Yes Yes L&R: Balanced XLR, 1/4" (6.5 mm) TRS, Phono (RCA) L&R: Balanced XLR 28 Hz - 2 kHz 80 Hz / 120 Hz / External 180 W > 104 dB > 113 dB 92 dB SPL / 1m @ -10 dBV Bal Input 3/4” (18 mm) MDF Metallic Anthracite Paint / Dark Matte Black PVC 414 mm x 381 mm x 460 mm (16.3 in x 15 in x 18.1 in) 20.7 kg (45.5 lb) System Type Controls MSC1 Controller SPECIFICATION Monitor System Controller with RMC™ Room Mode Correction Master Volume Control, RMC On/Off*, Mute On/Off*, EQ On/Off*, Subwoofer On/Off, A/B/C Input Select, A/B Speaker Select, Heaphone Output Volume, Input Gain, Signal Present Indicator,Clip Indicator, Power On Indicator Software Controls Speaker EQ* Subwoofer Settings* Close up view Input Panel Features Input Connectors (A, B / C) Output Connectors (A, B and Subwoofer) Headphone Output RMC Mic IN / OUT Computer Interface Included Accessories Caution: Unsafe mounting or overhead suspension of any heavy load can result in serious injury and equipment damage. Mounting of speakers should be done by qualified persons in accordance with all applicable local safety and construction standards. Be certain to follow the instructions provided by the manufacturer of the mounting bracket, be certain that it is capable of supporting the weight of the speaker to be mounted. Specifications are subject to change without prior notice. More Information available at www.jblpro.com/LSR © 2009 JBL Professional 8500 Balboa Boulevard, Northridge CA 91329 USA RMC Calibration Settings* Low Frequency EQ Shelf Frequency, Low Frequency EQ Gain, High Frequency EQ Shelf Frequency, High Frequency Gain Level Selectable Crossover Frequencies: 60 Hz, 80 Hz, 120 Hz Polarity 4 Balanced 1/4" (6.5 mm) TRS / 2 Unbalanced Phono (RCA) 5 Balanced 1/4" (6.5 mm) TRS Stereo 1/4" (6.5 mm) 1/8" TRS (3.5 mm) USB 2.0 RMC™ Calibration Microphone, MSC1 Control Center Software Computer Interconnect Cables *Available on Speaker Output A CAT LSR2300-25 8/09
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 8.0.0 (Macintosh) X Press Private : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (PANTONE 172 C).%%CMYKCustomColor: 0 .66 .88 0 (PANTONE 172 C).%%EndComments Modify Date : 2009:08:28 14:59:20-07:00 Creator Tool : QuarkXPress(tm) 6.0 Create Date : 2009:08:21 16:19:32Z Metadata Date : 2009:08:28 14:59:20-07:00 Format : application/pdf Title : Layout 1 Document ID : uuid:6ff11a08-f283-4652-8828-9ccb0c9d1846 Instance ID : uuid:def74053-9504-4858-b0f8-24994d16a989 Page Count : 6 Creator : QuarkXPress(tm) 6.0EXIF Metadata provided by EXIF.tools