JBL VTX G28 Spec Sheet 5.12.15

User Manual: JBL JBL - Manuals+

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadJBL  VTX-G28 Spec Sheet 5.12.15
Open PDF In BrowserView PDF
SPECSHEET

VTX G28

High Performance Dual 18” Subwoofer

Key Features:
•

•

•

•

•

2269H Differential Drive®, Dual Neodymium Magnet, Dual Voice Coil,
Direct Cooled™ dual 18” transducers
Reverse-Cardioid Arrayable with convenient front-facing NL4 connector
and OEM factory presets for cardioid operation
BSS® Audio OmniDriveHD V5 Processing for use with Crown Audio
ITechHD or VRack and control via JBL HiQnet Performance Manager™
Companion subwoofer for VTX V20 or VTX V25-II
Exceptionally high power handling (4000W continuous, 16000W peak
AES / 2hr), delivers highest SPL output and LF extension in its class

Description:
The VTX G28 is a full size, high-output, cardioid-arrayable subwoofer designed to deliver maximum acoustic output and impact with the highest possible
fidelity for a wide variety of sound reinforcement applications. Built to house two high-performance, road-proven, ultra long excursion JBL 2269H 18”
transducers, VTX G28 features a large enclosure volume and a pseudo-vented bandpass alignment with port tuning that delivers true sub performance
down to 22 Hz. Inverted woofers (facing outwards) provide improved cooling, increased power handling and reduced power compression. The cabinet is
sized for convenient truck packing, transport and stacking, while a front-mounted NL4 connector ground-supported makes cardioid deployment quick
and clean. VTX G28 provides a high-impact, ground-stacked subwoofer complement for either VTX V20 or VTX V25-II. For more demanding applications,
VTX G28 can be used as part of a 5-way system to complement suspended V25-II and S28 or V20 and S25 configurations. JBL HiQnet Performance
Manager™ control enables fast, accurate system deployment, while BSS® Audio OmniDrive HD V5 processing provides consistent, simple integration of
VTX G28 in any sound reinforcement system.

Specifications:
System

Transducers

Frequency Range (-10 dB):
System Input Power Rating¹:

Maximum Peak Output²:

2 x 2400 W Continuous, 2x 9600 W Peak (AES
/ 2 hour)
101 dB, 1W / 1m (2.0 Vrms at 3.3 ft ) half-space
conditions
144 dB SPL half-space conditions

Required Amplification &
Processing:
System Impedance:

Crown® I-TechHD or VRack power amplification
JBL HiQnet Performance Manager system control
LF: 2 x 8 ohms

Bandpass Sensitivity:

Low Frequency:

22 Hz - 160hz

2 x 2269H, 457 mm (18 in) dia., 100 mm (4 in)
Dual Coil, neodymium Differential Drive®, Direct
Cooled™

Enclosure
Construction:
Grille:
Input Connectors:
Dimensions (H x W x D):
Net Weight:

18 mm, 11-ply Finnish birch plywood; black
DuraFlex™ finish; integral recessed handles
Powder coated 14 gauge hex-perforation steel
with acoustically-transparent black cloth backing
Neutrik® Speakon® NL-4 (2x) and NL-8 (2x)
LF1: 1+/-, LF2: 2+/495.3 mm x 1221.7 mm x 1211.58 mm
(19.5 in x 48.1 in x 47.7 in)
92.5 kg (204 lbs)

Footnotes:
1: AES Standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air.
2: Calculated maximum SPL based on rated peak power and measured sensitivity
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current
JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.

High Performance Dual 18” Subwoofer

Acoustical Measurements

System Impedance

Frequency Response with Recommended Digital Signal Processing
VTX G28 presets (60 Hz solid, 80 Hz dashed)
100

120

Impedance (Ohms)

110

SPL (dB)

SPECSHEET

VTX G28

100

90

80
20

100

Frequency (Hz)

10

1
20

1000

100

Frequency (Hz)

1000

Dimensions
1210.8
[47.7]

CL

1211.1
[47.7]

373.6
[14.7]

TOP/BOTTOM

493.3
[19.4]

CL

SIDES

FRONT

REAR

Accessories
•

VTX-G28-ACC: Protective cover and transport dolly for 1 x VTX G28

© 2015 Harman International Industries, Incorporated

| 8500 Balboa Blvd. Northridge, CA 91329 USA | www.jblpro.com

|

SSVTXG28 • CRP • 03/15



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12
Instance ID                     : uuid:ede729a6-bbd7-3c4c-a4ff-cd14692a52ca
Original Document ID            : adobe:docid:indd:9fdc1619-1f29-11e0-9eb5-f00b874cc497
Document ID                     : xmp.id:a9fa0593-7794-4b2b-ba78-34e9a3f9f576
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:1503c6ee-5011-422f-90d0-1c2e1314496f
Derived From Document ID        : xmp.did:82213bfe-95bf-4c0b-9925-5f93b6a91ef8
Derived From Original Document ID: adobe:docid:indd:9fdc1619-1f29-11e0-9eb5-f00b874cc497
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:05:12 15:22:17-07:00
Create Date                     : 2015:05:12 15:22:17-07:00
Modify Date                     : 2015:05:12 15:22:17-07:00
Metadata Date                   : 2015:05:12 15:22:17-07:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2014 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu