JBL TI 85 GRAPH LINK For Windows Guidebook (English) Glw85 Usa
User Manual: JBL TI-85 TI-GRAPH LINK for Windows guidebook (English) TI-GRAPH LINK™ for Windows® Guidebook
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
English TI.GRAPH LINKé FOR WINDOWSë FOR THE TI.85 CONDENSED GUIDEBOOK TI-GRAPH LINK is a trademark of Texas Instruments Incorporated. IBM is a registered trademark of International Business Machines Corporation. Windows is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer, Inc. PostScript is a registered trademark of Adobe Systems, Inc. © 1998 by Texas Instruments Incorporated. All Rights Reserved. W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 1 of 7 Table of Contents Getting Started with TI.GRAPH LINK for Windows ENG.2 System Requirements ............................................................. 3 Connecting the TI-GRAPH LINK Cable ................................ 3 Installing the TI-GRAPH LINK Software ............................. 5 Starting TI-GRAPH LINK and Testing the Connection...... 5 Troubleshooting ...................................................................... 5 Menu Bar Options.................................................................... 6 Sending Files............................................................................ 7 Receiving Files......................................................................... 7 Opening and Printing Files..................................................... 7 Exiting the Program ................................................................ 7 TI.GRAPH LINK for the TI.85 (Windows) W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 2 of 7 Getting Started with TI.GRAPH LINK for Windows Use this document for a quick review of how to install and operate TI.GRAPH LINK for Windows for the TI.85. System Requirements The PC used to run the TI-GRAPH LINK software must meet the following hardware and software requirements. ¦ Microsoft Windows version 3.1 or later. ¦ MS-DOSê operating system version 3.1 or later (MS-DOS version 5.0 or later recommended). ¦ 486 PC or better with 8 MB available RAM. ¦ CD-ROM drive and one 3½-inch diskette drive. ¦ 256 color VGA. ¦ Hard disk with 1.5 MB available storage space. ¦ An available serial communication port configured as Com Port1, Com Port 2, Com Port 3, or Com Port 4. Windows Only (Black Cable) ¦ Cable and Adapters Same as above plus 486 PC or better with 8 MB available RAM (Windows 95/98); 16 MB available RAM (Windows NT). The instructional package includes the following cable and adapter: ¦ One gray TI-GRAPH LINK cable that connects to a TI-85 and IBM-compatible computer. ¦ One 25-pin to 9-pin adapter. The retail package includes the following cables: ¦ One black TI-GRAPH LINK cable that connects to an IBM-compatible computer. ¦ One unit-to-unit cable. TI.GRAPH LINK for the TI.85 (Windows) ENG-3 W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 3 of 7 Connecting the TI.GRAPH LINK Cable To connect the gray TI-GRAPH LINK cable between your PC and a TI-85: 1. Connect one end of the cable to the PC serial port. If necessary, use the 25-pin to 9-pin adapter. 2. Connect the other end of the TI-GRAPH LINK cable to the port at the bottom of the TI-85 calculator. 3. Insert all connectors firmly. To connect the black TI-GRAPH LINK cable between your PC and a TI-85: 1. Connect the cable with the 9-pin connector to the PC serial port you will use. (If necessary, obtain a 9-pin to 25-pin adapter.) 2. Connect the other end of the black cable to one end of the unit-to-unit cable. 3. Connect the other end of the unit-to-unit cable to the port on the TI-85. 4. Insert all connectors firmly. ENG.4 TI.GRAPH LINK for the TI.85 (Windows) W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 4 of 7 Installing the TI.GRAPH LINK Software Make a copy of the original disk and use the copy to load the software. 1. Start Microsoft Windows. 2. Insert the CD-ROM in your CD-ROM drive and follow the displayed instructions about installing the software. ¦ Win 3.1x users need to run the TICD31 program from the TI Resource CD. ¦ For 3½-inch diskette installations, procede to step 3. 3. Insert the TI-GRAPH LINK for Windows diskette in drive A. 4. From Program Manager, open the File menu and select Run. 5. Type a:\Ti85usa.exe. Press Enter and follow the instructions that appear on your display. 6. After installing the TI-GRAPH LINK software, open the Windows Control Panel and select Fonts. Open the TrueType window and ensure that TrueType fonts are enabled. Starting TI.GRAPH LINK and Testing the Connection On the PC, open the TI-GRAPH LINK group and doubleclick on the TI-85 program icon to start the application. To test the cable connection between the PC and the calculator: 1. Turn on the calculator. Display the MODE screen on the TI-85 by pressing y[MODE]. 2. On the PC, open the Link menu and select the serial communications port (COM1, COM2, COM3, COM4) to which the cable from the TI-85 is connected. 3. Open the Link menu to select the cable type: select Windows/Macintosh (Gray Cable) or Windows Only (Black Cable). 4. Open the Link menu and select Get LCD from TI.85 to Clipboard. The Receive window is displayed. 5. Click on Receive. The contents of the TI-85 display appear in the LCD Save window. 6. Click on OK to close the LCD Save window. TI.GRAPH LINK for the TI.85 (Windows) ENG-5 W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 5 of 7 Troubleshooting Menu Bar Options ENG.6 If error appears when you click on Receive, there is a communication problem between the TI-85 and the PC. ¦ Make sure that all cables are firmly connected. ¦ Make sure that the plug connected to the TI-85 is pushed in all the way. ¦ Make sure you have selected the correct serial port (COM1, COM2, COM3, or COM4). Open the Link menu to check your current setting. ¦ Make sure the correct cable type is selected in the Link menu. Menu Item Action File Accesses the standard file operations and specialist TI-GRAPH LINK utility functions. Edit Accesses the standard PC edit functions. Insert Accesses the TI-85 command names. Link Allows you to send and receive data between the PC and a TI-85, capture the TI-85 display, and set the COM Port for communicating with a TI-85. Window Allows you to display the Pick List or TI-85 display keyboard. Accesses open Edit Windows. Help Accesses online help information. TI.GRAPH LINK for the TI.85 (Windows) W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 6 of 7 Sending Files To send files from the PC to a TI-85: 1. On the TI-85, press y[LINK], and then select RECV for the TI-85. The TI-85 displays the message “Waiting. . . ” 2. On the PC, open the Link menu, and then the Send window. Select the files you want to send to the TI-85, then click on OK to transmit the files. Receiving Files To receive files on the PC from a TI-85: 1. On the PC, open the Link menu, select Receive, and choose Group or Individual Files. 2. On the TI-85, press y[LINK], select SEND and select the files you want to transfer. Then press XMIT on the TI-85. 3. On the PC, press Save to save the transferred files. Opening and Printing Files To open and print TI-85 files on the PC: 1. On the PC, open the File menu and select Open. Highlight the file you want to open and click on OK. The file should now be open in the Edit window. 2. To print the open file, open the File menu and select Print. Then click on OK to print the file. 3. To copy the contents of the file to the Windows Clipboard, highlight the items you want to copy, open the Edit menu, and select Copy. 4. You can now paste the contents of the Windows Clipboard to an open Edit window, or to another Windows application, using the Edit, Paste menu items. Exiting the Program You can exit the TI-GRAPH LINK application by opening the File menu and selecting Exit. TI.GRAPH LINK for the TI.85 (Windows) ENG-7 W85-ENG.DOC TI-85 Windows, English Bob Fedorisko Revised: 02/22/99 2:00 PM Printed: 02/23/99 12:50 PM Page 7 of 7 TI Product Service and Warranty Information TI Product and Services Information Service and Warranty Information For more information about TI products and services, contact TI by e-mail or visit the TI calculator home page on the world-wide web. e-mail address: ti-cares@ti.com internet address: http://www.ti.com/calc For information about the length and terms of the warranty or about product service, refer to the warranty statement enclosed with this product or contact your local Texas Instruments retailer/distributor.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 1999:02:23 13:05:06 Producer : Acrobat Distiller 3.0 for Windows Modify Date : 1999:10:02 15:15:08 Page Count : 8EXIF Metadata provided by EXIF.tools