JCM Technologies MUV Transmitter User Manual MUV2 FCC Rev01

JCM Technologies, S.A. Transmitter MUV2 FCC Rev01

Users Guide

User manual MUV2 FCC1122334455667788D DC CB BA ADavid Clos 22/11/20161 1A3ofRevSheetModified ByRevised ByDateDateScale PCB Ver.SheetTitleDwgGeneral TolerancesCONFIDENTIAL INFORMATIONRG10.7IDRev Date DescriptionUnless otherwise specified dimensions are in millimeters ±0,15 angles in grades ±2ºDavid Clos 30/01/20171BBPROGRAMMATION SIDE-PROGA= Transmitter registered in an installation / B= New transmitter / émetteur déjà mémorisé dans une installationnouvel émetteur - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.e.r.p. <1mWUM_3200901_MUV FCC_Rev01DONNÉES TECHNIQUESJCM Technologies S.A. n’approuve aucune modification apportée à l’appareil par l’utilisateur,quelle qu’en soit la nature. Tout changement ou modification peuvent annuler le droitd’utilisation de l’appareil par l’utilisateur.FCC/ISED Regulatory noticesThis device complies with Part 15 of the FCC Rules and Industry Canada’s licence-exempt RSSstandards. Operation is subject to the following two conditions: (1) this device may not causeinterference, and (2) this device must accept any interference, including interference that maycause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.JCM Technologies has not approved any changes or modifications to this device by the user.Any changes or modifications could void the user’s authority to operate the equipment.Interference statementFCC Class B digital device noticeThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:

Navigation menu