JETION XWM2-1001 2.4G Wireless Mouse User Manual 15 XCK2 1001 M UserMan
JETION INTERNATIONAL LIMITED 2.4G Wireless Mouse 15 XCK2 1001 M UserMan
JETION >
15_XCK2-1001(M) UserMan
User Manual
Model: XCK2-1001
FCC ID:FGOXWM2-1001
Operation:
*Take out the receiver. (The receiver of this wireless product is in the battery
compartment at the bottom of the mouse)
*Plug the mini wireless receiver into the USB port.
*Now you can use and enjoy your wireless mouse
Mouse Specifications:
2.4G wireless mouse
Mouse size: 10*6.5*3.8CM
Operating distance up to 10 meters
Operating Voltage: 3 V
Battery: AAA*2pcs
Working Current: 3mA ± 100uA
Standby: 900uA, standby time is around 10s.
Sleeping Current: 80uA
Note:
The mouse will turn off by itself when about 10 minutes without use. Just
press a key or the mouse scroll and return to its operation. Please turn it off
when not in use for a long time.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Thisdevicecomplieswithpart15oftheFCCrules.Operationissubjecttothefollowingtwo
conditions:
(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause
undesiredoperation.
Changesormodificationstothisunitnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.