JETOP IHB26B WIRELESS SPEAKER SYSTEM WITH SUBWOOFER User Manual

JETOP INDUSTRIAL LIMITED WIRELESS SPEAKER SYSTEM WITH SUBWOOFER

User Manual

Overview
Wireless Speaker System with Subwoofer
Users Guide for Model IHB26B v1616-01
Features
• 2.1 channel stereo sound
• Built-in amplier
• 3 speakers: left, right, and subwoofer
• LED light eects
• Supports Bluetooth
• Bluetooth Wireless range: 60 ft
• Analog volume control
• Bass and Treble controls
• Aux In 3.5 mm audio input
• USB port for device charging
• AC power: built-in AC power cable
Includes
• 3.5mm audio cable
• User’s guide
Volume Up/Down
Treble Up/Down
Bass Up/Down
Stereo Speaker Outputs
Pair Bluetooth/Lights
Press and hold to pair.
Short press to turn lights ON or OFF.
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
Rear View
Power ON/OFF
USB Power Port
Aux In 3.5mm Audio Input
Warning: Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
WARNING: Shock hazard - Do Not Open.
Caution and marking information is located at the rear or bottom of the apparatus.
Mains plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the mains
plug should be disconnected form the mains socket outlet completely.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
Objects lled with liquids, such as vases, shall not be placed on the apparatus
WARNING: Do not place this unit directly onto furniture surfaces with any type of soft,
porous, or sensitive nish. As with any rubber compound made with oils, the feet could
cause marks or staining where the feet reside. We recommend using a protective barrier
such as a cloth or a piece of glass between the unit and the surface to reduce the risk of
damage and/or staining.
WARNING: This product may contain chemicals known to the State of California to cause
birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.
This product meets and complies with all Federal regulations.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. When the provided plug does
not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specied by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS FCC Warnings
Additional Warnings
This lightning ash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of non-insulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude
to constitute a risk of electric shock.
Warning: To reduce the risk of electric shock,
do not remove cover (or back) as there are no
user-serviceable parts inside. Refer servicing
to qualied personnel.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance instructions in the literature
accompanying the appliance.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This equipment is a Class II or double insulated electrical appliance.
It has been designed in such a way that it does not require a safety
connection to electrical earth.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain
or moisture.
WARNING: The MAINS plug is used as the disconnect device, the disconnect device shall
remain readily operable.
IHB26B-IB-Lab.indd 1 6/27/2016 4:34:54 PM
Aux In
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In Input on the unit and the audio
output on an audio device.
2. Use the controls on the connected device to select audio, play, pause, skip,
and adjust the volume.
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la
sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
INTERNATIONAL SUPPORT
Protect for Today
Sustain for Tomorrow
Made
Green
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
Power & Charging
Connect the power plug to a standard power outlet.
Connect Speakers
Connect the left and right speaker cables to the left and right audio outputs on
the subwoofer.
Charge Devices
Using an appropriate USB power cable (not included), connect your device to the
USB Power Port on the rear of the subwoofer.
120V 60Hz
POWER
ON
OFF
AUX IN
SPEAKER
OUTPUT
R L
TREBLE VOLUME BASS
USB
CHARGER ~
PAIR / LIGHTS
Bluetooth Wireless Audio
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the steps listed here.
1. Power ON the unit and press and hold the Pair button to begin pairing. The
LED lights will begin ashing quickly. The lights will always ash during the
pairing process, even if they are set to OFF. Once the pairing process is complete,
the lights will return to OFF. When pairing, remain within 3 feet of the unit.
2. Using the controls on your Bluetooth device, search for and select IHB26
in your Bluetooth settings to pair. If your device requests a password, enter
the default password 0 0 0 0 . Refer to the user’s manual for your specic
device for instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, the LED lights will turn solid and an audible
chime will sound from the speaker. Use the controls on the connected
device to select audio, play, pause, skip, and adjust the volume.
IHB26B-IB-Lab.indd 2 6/27/2016 4:34:55 PM

Navigation menu