JETOP ITB124B Bluetooth Tower Speaker User Manual
JETOP INDUSTRIAL LIMITED Bluetooth Tower Speaker Users Manual
JETOP >
Users Manual
Bluetooth Tower Speaker
User’s Guide for Model No. ITB124B v1068-01
2
Safety Instructions & Warnings
Important Safety Instructions
• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
• Do not defeat the safety purpose of the polarized or ground-
ing - type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades
and a third grounding prong. e wide blade or the third
prong are provided for your safety. When the provided plug
does not t into your outlet, consult an electrician for replace-
ment of the obsolete outlet.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
• Only use attachments/accessories specied by the manu-
facturer.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualied service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket,
or table specied by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
FCC Warnings
-
-
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Warning
Warning
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
-
-
-
FCC Radiation Exposure Statement
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Customer Support: 1-888-999-4215 3
Safety Instructions & Warnings
Additional Warnings and Precautions
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Avis: AFIN DE PRÉVENIR LES CHOCS ÉLÉCTRIQUES,
FAITES CORRESPONDRE LA FICHE BLANCHE DE LA
PRISE À LA FENTE LARGE, INSÉREZ TOTALEMENT.
• WARNING: To reduce the risk of re or electric shock,
do not expose this apparatus to rain, moisture, dripping,
or splashing.
Avis: Pour réduire le risque d'incendie ou de choc élec-
trique, n'exposez pas cet appareil à la pluie ou l'humidité ou
aux éclaboussures.
CaUTiOn
-
Avis: L’utilisation de commande ou l’exécution de procé-
dures autres que celles spéciées ici peuvent aboutir à une
exposition à des radiations dangereuses.
• WARNING: Changes or modications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Avis: Des changements ou des modications sur ce produit
non expressément approuvés par la partie responsable de
la conformité peut annuler le droit de l’utilisateur d’utiliser
cet équipement.
• WARNING: Do not place this unit directly onto furniture
surfaces with any type of so, porous, or sensitive nish. As
with any rubber compound made with oils, the feet could
cause marks or staining where the feet reside. We recom-
mend using a protective barrier such as a cloth or a piece of
glass between the unit and the surface to reduce the risk of
damage and/or staining.
Avis: Ne placez pas cette unité directement sur des surfaces
de meubles dont la nition serait douce, poreuse ou sensible.
Car, comme tout composé caoutchouc a base d’huiles, les
pieds pourraient laisser des tracs ou des taches à l’endroit ou
ils sont posés. Nous recommandons d’utiliser une protection
comme un linge ou un morceau de verre entre l’unité et la
surface pour réduire le risque de dégât et/ou de tache.
• WARNING: Use of this unit near uorescent lighting may
cause interference regarding use of the remote. If the unit is
displaying erratic behavior move away from any uorescent
lighting, as it may be the cause.
Avis: L’utilisation de cette unité en présence de lumières u-
orescentes peut causer des interférences lors de l’utilisation
de la télécommande. En cas de dysfonctionnement, éteignez
les sources de lumière uorescentes, car celles-ci pourraient
en être la cause.
• CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
AVIS: Un danger d’explosion est présent lorsque les piles
sont remplacées de manière incorrecte. Remplacez seulement
les piles par des piles de type équivalent.
• WARNING: ere is a danger of explosion if you attempt
to charge standard Alkaline batteries in the unit. Only use
rechargeable NiMH batteries.
AVIS: Charger des piles alcalines dans l’unité peut causer
une explosion. Utilisez seulement des piles rechargeables
NiMH.
• WARNING: e remote control’s button cell battery contains
mercury. Do not put in the trash, instead recycle or dispose of
as hazardous waste.
AVIS: Les piles boutons de la télécommande contiennent
du mercure. Ne les jetez pas à la corbeille, recyclez-les ou
disposez-les comme des déchets dangereux.
• WARNING: Lithium batteries, like all rechargeable batter-
ies, are recyclable and should be recycled or disposed of in
normal household waste. Contact your local government for
disposal or recycling practices in your area. ey should never
be incinerated since they might explode.
AVIS: Les piles Lithium ion, comme toutes les autres piles
rechargeables, sont recyclables et doivent être etées avec vos
déchets ménagers. Contactez votre municipalité pour obtenir
des conseils sur les moyens de disposition et de recyclage
dans votre région. N’incinérez pas vos piles, car celles-ci
peuvent exploser.
• WARNING: Shock hazard - Do Not Open.
AVIS: Risque de choc électrique - ne pas ouvrir
Attention et de marquage des informations est situé sur le
paneau arrière ou inférieur de l’unité.
Objets remplis de liquides, comme des vases, ne doivent pas
être placés sur l’appareil.
-
La prise du secteur est utilisé pour déconnecter le système.
La prise du secteur ne doit pas être obstruée ou doit être
facilement accessible pendant son utilisation. Pour être
complètement déconnecté de l’alimentation d’entrée, la prise
doit être débranchée du secteur.
Les piles ne doivent pas être exposées à de forte chaleur,
tel qu’à la lumière du soleil, au feu ou autres choses de
semblable.
Ce produit est livré avec une pile pièce / touche. Si la pile
pièce / bouton est avalé, il peut causer des brûlures internes
graves et peut conduire à la mort.
Gardez les piles neuves et d’occasion à partir des enfants. Si
le compartiment de la batterie ne pas fermer correctement,
cesser d’utiliser le produit et garder loin des enfants.
Si vous pensez que les batteries peuvent avoir été avalé ou
placé à l’intérieur d’une partie du corps, consulter immédi-
atement un médecin.
Ne pas mélanger vieilles et nouvelles batteries.
Remplacer complètement toutes les piles par des neuves.
Ne mélangez pas des piles alcalines, standard (carbone-zinc)
ou rechargeables (Ni-Cd, Ni-MH, etc) batteries.
Piles doivent être recyclées ou éliminées selon les directives
étatiques et locales.
4
Table of Contents
Unboxing Your HD Tower Speaker � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5
Features & Specications
Includes
Setup � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �5
Power
Remote Battery
Attaching the Stand
Orientation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �6-7
Speaker Controls & Inputs
Remote Layout
Audio Inputs � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �8-9
Using the Stereo RCA Inputs
Using the Line In
Bluetooth & Radio � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Pairing a Bluetooth Device for the First Time
Playing Audio Wirelessly
Tuning the FM Radio
Automatically Programming Memory Presets
Manually Programming Memory Presets
Clock � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
Setting the Clock
Company Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Contact Information
International Support
Green Initiative
Warranty
Customer Support: 1-888-999-4215 5
AC 120V ~ 60Hz
AUX IN
FM ANT.
LINE IN
L
R
LITHIUM BAT TERY
CR 2025
3V
Out
Slide
Remote Battery
Requires a CR2025 battery (pre-installed).
Power
Plug the small end of the power cord into the
DC Input on the back of the speaker, and the
large plug into a standard wall outlet.
Unboxing Your HD Tower Speaker
Setup
Features & Specications
• Supports Bluetooth v2.1
• Wireless range: 33 feet
• Pairing button
• Built-in 4 x 3" high power speakers
• LED light effects
• Digital FM radio (PLL)
• Station memory presets (20 FM)
• 3.5mm audio input
• RCA stereo audio inputs
• Built-in FM wire antenna
• Negative LCD display with white backlight
• EQ presets
• Digital volume control
• Bass controls
• Treble controls
• Digital clock
• Remote
• Supports Enhanced Data Rate (EDR)
• Supports profile A2DP (Advanced Audio
Distribution Profile)
• DC power input: requires an AC/DC power adapter
(included)
Features & Specications
• Remote control:
requires a CR2025 battery (pre-installed)
• RCA stereo audio cable
• AC/DC power adaptor
• Wooden stand and mounting hardware
Attaching the Stand
Align the holes in the bottom of the unit to the holes
in the base. Use a philips-head screwdriver to tighten
or remove the screws. Using an power drill could
damage the TV stand.
6
Speaker Controls & Inputs
Orientation
Volume -/+
Speakers (x4)
Power
RCA Audio Input
Pair Bluetooth
Line In
Skip/Search/
Tune -/+
Clock Set/
Play/Pause
LED Display
Source
Customer Support: 1-888-999-4215 7
Remote Layout
Volume
Press to
adjust
the volume.
Bass
Press to
adjust the
bass up or
down
Treble
Press to
adjust the
treble up or
down.
Power
Press to turn the
unit on or off.
Source
Press to cycle between
Aux, Bluetooth, Line in,
and FM radio.
Tune -/+/ Skip
In FM mode, press to adjust
frequency of the FM radio.
In Bluetooth mode,
press to skip a track.
Play/Pause
Press to play or pause a
track in Bluetooth mode.
Memory
Press to save a radio
station to memory.
EQ
Press to cycle through
equalizer settings.
Mute
Press to mute the volume.
FM Scan
Press to begin scanning and
saving FM radio frequencies.
Recall
Press to cycle through
saved radio stations.
Clock Set
With the unit off, press to
begin setting the clock,
then use the Tun -/+
buttons to set the time.
Lights
Press to turn the speaker
lights on or off.
8
Audio Inputs
Using the Stereo RCA Inputs
When connecting two products using an RCA Cable, match the colored ports with the same colored connection.
1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs
on the television.
2. Press the Power button to power on the unit.
3. Press the Source button repeatedly to enter AUX Mode.
4. Audio played through the television will now be heard through the speakers.
Customer Support: 1-888-999-4215 9
Using the Line In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit, and plug the other end of the cable
into the audio output/headphone output on an MP3 Player or other audio source.
2. Press the Power button to power the unit on.
3. Press the Source button repeatedly to enter Line In Mode.
4. Audio played through the connected device will now be heard through the speakers.
10
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the Source button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing
indicator on the display.
3. Press the Pair button on the top of the unit.
The pairing indicator will flash quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the ITB124 in your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the unit and the indicator will stop
flashing and become solid.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.
Playing Audio Wirelessly
1. After pairing to a bluetooth device, use the controls on the remote, the unit, or the native controls on the
connected Bluetooth Device to play, pause or skip a selected track.
2. Audio played through the connected Bluetooth device will now be heard through the speakers.
Bluetooth & Radio
Automatically Programming Memory Presets
1. Press the Source button to enter FM Radio Mode.
2. Press the FM Scan button on the remote.
3. The speaker will scan for all available stations, and store them.
4. Press the Recall button on the remote repeatedly to cycle through your stored stations.
Tuning the FM Radio
1. Press the Power button to turn the unit on.
2. Press the Source button to switch the unit to FM Radio Mode.
3. Press the Tun-/+ buttons on the unit or the remote to scan for the next available station.
4. Press and hold the Tun-/+ buttons to search for the next available station.
Manually Programming Memory Presets
1. Press the Source button to enter FM Radio Mode and tune to the desired frequency using the Tun -/+
buttons on the remote.
2. Press anywathe Memory button on the remote, then press the Tun -/+ buttons to select a Memory Preset (1
to 20). Press the Memory button again to save the radio frequency to that preset.
3. Press the Recall button on the remote repeatedly to cycle through your stored stations.
Customer Support: 1-888-999-4215 11
Clock
Setting the Clock
1. With the unit powered off, press and hold the Clock Set button (or press the Clock Set button on the remote).
2. The hour will begin to flash.
3. Press the Tun -/+ buttons to adjust the hour.
4. Press the Clock Set button.
5. The minute will begin to flash.
6. Press the Tun-/+ buttons to adjust the minute.
7. Press the Clock Set button again to finish setting the time.
12
Green Initiative
Our Environmental Commitment to "Protect for Today and Sustain for
Tomorrow". On a continual basis DPI, Inc. is making efforts to sustain the
environment and improve the recyclability of its products and packaging.
Focusing on “protecting for today and sustaining for tomorrow” DPI,
Inc. has committed to reducing packaging size, increasing the usage of
recyclable plastics, and ensuring that packaging and manuals are made
with up to 85% recycled material. In addition to material consideration,
DPI, Inc. has also focused on the finer details that positively impact the
environment such as employing the usage of soy-based inks.
DPI, Inc. also ensures that the factories that produce the company’s wide
variety of consumer electronics adhere to environmentally friendly air and
water restrictions. This is yet another example that every step of the way
DPI, Inc. is making efforts to lessen any impact on the environment.
In 2011 DPI, Inc. also began conversations with Energy Star in order
to ensure that the consumer electronics being produced meet high
standards of energy efficiency. The ultimate goal is keeping energy
costs for consumers low while providing quality, feature-rich products.
International Support
To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit
the support section at: www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas
frecuentes, visite la sección de apoyo en: www.gpx.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des
questions fréquemment posées, consultez la rubrique d’assistance sur: www.gpx.com
Contact Information
Website: www.gpx.com
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
Phone Support: 1-888-999-4215
Warranty
For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.gpx.com
Company Information
Protect for Today
Sustain for Tomorrow
Made
Green
Copyright © 2014 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property
of their respective owners. Specifications are subject to change without notice.