JIAYIYANG ELECTRONICS 201507-998DB Rechargeable and Waterproof Training Collar User Manual 1
SHENZHEN JIAYIYANG ELECTRONICS CO., LTD Rechargeable and Waterproof Training Collar 1
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2759145 |
| Application ID | l2mvTCU+JNdGAvMsfARqpg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.86kB (1948266 bits) |
| Date Submitted | 2015-09-23 00:00:00 |
| Date Available | 2015-09-23 00:00:00 |
| Creation Date | 2015-09-17 10:05:40 |
| Producing Software | Acrobat Distiller 10.1.0 (Windows) |
| Document Lastmod | 2015-09-17 10:05:40 |
| Document Title | Microsoft Word - 文档 1 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | vincent |
I‘M“ Rechargeable and Waterproof LCD Remote Pet Training System Operating Guide Please read this entire guide before beginning Model Number: IS-PET998DB 1for1 Model Number: IS-PET998DB 1for2 Important Safety Information mama Not for use with aggressive dogs. Do not use this product ii your dog IS aggressive. or it your dog is prone to aggressive behaVIor. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate foryour dog, please consult your veterinarian or certified trainer. CAUTION Risk of Skin damage. Please read and iollow the instructions in this manual. Proper fit of the collar is important A collar worn for too long or made too tight on the pet's neck may cause skin damage. Ranging from redness to pressure ulcers, this condition is commonly known as bedsores These collars can cause pressure necrosis if used incorrectly and is often misidentified as burns. 0 Avoid leaving the collar on the dog ior more than 12 hours per day. - When possible reposition the collaron the pet‘s neck every 1 to 2 hours. ' Check the fit to prevent excessive pressure: iollow the instructions in this manual. 0 Never connect a lead to the electronic collar: it will cause excessive pressure on the contacts. 0 When using a separate collar for a lead. don't put pressure on the electronic collar. - wash the dog‘s neck area and the contacts oi the collar weekly with a damp cloth. ' Examine the contact area dailyior signs ofa rash ora sore, 0 If a rash or sore is found. discontinue use of the collar until the skin has healed. o Ii the condition persists beyond 48 hours. see your veterinarian. These steps will help keep your pet saie and comfortable. Millions oi pets are comiortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may iind alter some time that your pet is very tolerant of the collar. If so. you may relax some of these precautions It is important to continue daily checks of the contact area. It redness or sores are found, discontinue use until the skin has fully healed. Thank you forchoosing Petrainer Rechargeable and Waterproof LCD Remote Pet Training System Our mission is to ensure your pet's safety by providing you the tools and techniques to successiully train your pet. Table of Contents Compments .. 4 Now the Petrainer Rechargeable and wmrprooi Training Collar Work- ~ 5 Features Key Definition ----- Operating Guide - 8 Prepare the Remote Transmitter . 8 Prepare the ReoeiverOollar Encode between Remote Transmitter and Receiver Collar To Test Petrainer Rechargeable and Waterprooi Training Collar Fit the Receiver Collar Re—Thread the Cellar FrequentlyAeked Questions Troubleshooting GenerclTralnlng Tlps Common size of dltferent dogs LIMITED 90 DAYS WARRANTY ... Petrainer CUSTOMER SERVICE 20 AWarning Please charge before using the product! It putting the transmitter and receiver collar In storage fora long time, please charge both fully before leaving them Idle and continue charging once every month. Components IS-PET998DB 1 for 1 USB Cable and Remote Transmltter ReceiverCollar Resembling splllter cable S. “to f f f Charger Adjustable TPU Belt Testing Bulb 2 sets Contact i’olrlts lS-PET998DB 1 for 2 USE Cable and Remote Transmitter Receiver Collar Resemhlms splltlercable Charger AdjustahIeTPU Belt Testing Bulb 4 sets Contact Pomts How the Petrainer Rechargeable and Waterproof LCD Remote Pet Training System Works Petrainer Rechargeable and Waterprool LCD Remote Pet Training System has been proven sale. comiortable, and eitective for all pets overa poundst This system assists you in controlling your pot without a leash in a range up to 328 yards (300m). At the push ola button, the Remote Transmitter sends a signal, activating the Receiver Collar. Using the Remote Trainer consistently and correctly. many misbehaviorsthat your pet exhibits Will be corrected or any basic obedience commands can be taught Important: The Remote Trainer has a range up to 328 yards. Depending on the way you hold the Remote Transmitter. the range may vary. Hold the Remote Transmitter in a horizontal position away lrom your body to achieve optimum range, Terrain, weathert vegetation. transmission lrom other radio devices, and other lacters will allecl the range or your RemoteTrainer. Features 1. Rechargeable Remote Transmitter and Receiver collar. 2. Waterpreol Receiver Collar, allowing your pet to swrm in water 3 100|eve|sotvibration. 4 100 levels of static shock (optional). 5. Alter stimulation levels by pressing the Up & down buttons. 6 Tone button activates a tone on the receiver collar 7 Powersave: I The receiver collarwill go into deep sleep it there is no operation lord minutes and any dog movement will activate the receiver. o The Iransmitterwill go into STANDBY MODE if there is no operation alter20 seconds and go into deepsleep alter 2 minutes, press any button exceptthe LED light button to activate the transmitterirom Standby mode and press the Mode button for 5 seconds to awaken the transmitter irom deep sleep mode. 8. The system can be used for 1 or 2 ReceiverCollars. 9, Two pairs of metal prongs (short/long) to be suitabletor dogs with ditlerentlur lengths, Key Definition 0 l.Antenna ' Ira 2. Led light 3. LED Indicator I I 4. LCD Screen I Q. 2:: 1-100 level 4 Static shock mode in. Vibration mode iii Beep mode fr Lighlmode I Channell I Channelz 5 Low Battery Indicator 5. Up/down button 6. Led light button 7. Channel button 8. Launch button 9. Mode button 10. Lithium battery 11. Charging hole 1.Antenna: Transmits the signal from the Transmitterto the Receiver Collar. 2. Led light: This light will be on when pressing the LED light button, 3. Indication light: This light will llesh when the 'Y" button is pressed. The light will be activate when charging as well. 4. LCD display: - Static mode: With this made selected. pressing the "Y” button will cause the receiver to ernitshock. - Vibration mode: With this mode selected, pressing the “Y” button will cause the receiverto vibrate. I Beep mode: With this mode selected, pressing the ‘Y" button will cause the receiverto emita beep sound. - Light mode: With this mode selected. pressing the "Y“ button will cause the LED light on the receiver to llash green once every second. Its primary purpose isto help locate yourpet. - Channel 1: Indicates the selection otthe first collarreceiver. - Channel 2: Indicates the selection otthe second collar receiver, 5. Upldown button: Selects intensity level torVibration and Static Shock. 6. Led Ilght button: When pressing the LED light button, the LED light on the transmitter will be on 7. Channel button: Pressing this button WI" swap between the first and second collar receiver. 8. Launch buttonSends the signal from transmitterto receiver. resulting in stimulation, beep or light. depending on your mode selection, 9‘ Mode button: Press this button to switch between modes, There are 4 modes- Static, Vibration, Beep and light mode. 10. Lithium Battery: 3.7V 240 rnAhLiP. 11. Charging hole: Insert charging connector into charging hole to charge the Transmitter, Charging holes: Charge tor Receiver Collar RubbarCover: Seal charging hole to keep trcrn dust. Onl OttIEncede Button: turn onlott the Receiver Collar and hold it to enter encoding status. Contact Points: Deliver the sate static correction. A. When charging the battery. the red LED light shows up and changes to green LED alter iully charged Be In LED Light mode. press the launch button. the green LED in the Receiver Collar will tlash every one second. A B C D C. When Standby. the Receiver Collar will flash green LED lightevery tour seconds. D. Alter turn on the Receiver Collar. press and hold the Onion/Encode button tor 5 seconds to enter encoding period The green LED light will keep flashing tor 10 seconds to indicate the encoding time. Operating Guide Prepare the Remote Transmitter: Charge the Remote Transmltter 1. Connect the charger connectorto the charging jack. 2. Plug the charger into a standard outlet. 3. The red light on the Transmitter WI” be on. 4. Charge the Transmitter at least 6 hours when charging for the lirst time or until the light indicates charging is complete. 5. After tully charged, the red led Will turn off automatically. Low battery Indicate the symbol Will show up on the right side at LCD screen when recharging is necessary. How to use the Remote Transmitter 1 . To turn on/o" the Transmitter, hold the Mode button ior 5 seconds. 2, Set to the ditteient modes by pressing the Mode Button-The LCD images Willchangefromt ‘Ii iii V 3. Press uplDoWn buttons on right hand side otthe transmitter to set Vibration or Static Shock level. 4. Press the ‘/a button to swap between channel 1 or 2. depending on which receiver you wish to select. 5. The Remote Transmitterwill go into STANDBY MODE it no operation iorZO seconds and will TURN OFF it no operation ior2 minutes. 6. In STANDBY MODE, press any button (except LED light button) to wake up the transmitter. When the transmitter is powered oil, hold the Mode button on the Transmitter for Ssecconds to TURN ON. ' V. “3 Prepare the Receiver Collar: charge the Receiver Collar 1.To TURN ON the Receiver Collar, press the onloif button, a beep will sound, and the green LED will turn on and begin to flash every4 seconds. 2. Open the rubber cover and insert the charger connector into the charging hole. 3. Plug the charger into a standard outlet. 4. The red LED will be on. (A) 5. Chargethe ReceiverCollarlorat least 6 hours when charging lorthe first time or until the light indicates charging is complete. 6. Alter the unit is fully charged. the red LED light Will turn to a green LED light automatically. (8) 7. Put the rubber cover back in place. 8. It the battery needs recharging. the receiver collar Will beep [or 20 seconds. Note: Please check whether the battery needs recharging before you use the device. When you turn on the receiver. ii there are beeps tor 20 seconds, you need to recharge the receiver collar before using the unit. Pairing the Remote Transmitter and Receiver Collar: 1. Turn on the Remote Transmitter by pressing the Mode Button. 2. Select channel 1 or 2 by pressing the V; button. 3. Turn on the Receiver Collar by pressing the onloft button. 4. Press and hold the on/oll button lor5 seconds. the LED lightwill begin to tlash. Test Vibration Function - Press Mode button on the Remote Transmitter. swrtch to Vibrate mode. conlirm using the LCD display that the stimulation level is not at D. you can press UP/DOWN button on the right side to adjust o PressY button, Remote Collar will vibrate. that means \fibration Function works. 5. Once the Receiver Collar beeps and begins to flash. press the Y button on the Remote Transmitter immediately. Note: Pairing has to be linished within 10 seconds alter the tst beep lrom the Receiver Collar. Meaning. you have to press the V button within 10 seconds of the 1“ beep tor pairing to be completed. 6. You will hear a 2“ been irom the Receiver collar, if pairing is done successiully 7. It pairing a second Receiver Collar. repeat steps 2 to 5. but choose the otherchannel that the lirst Receiver Collar is not paired to. Note: Factory‘s delault is set to pair Within 10 seconds after turning on the Receiver Collar. When pairing the 1st Receiver Collar. don't put the second Receiver Collar into pairing status atthe same time as the 1" Receiver Collar, to avoid pairing on the same channel. Test Beep Function o Press Mode button of Remote Transmitter. swrlch to Beep Mode - Press V button. Receiver Collar WIII beep. that means Beep To Test Petrainer Rechargeable and Waterproof LCD Remote Pet Training System: The static impulse released by the Receiver Cellar cannot be seen MOde works. with naked eye. You can test the Stimulation With this method. Test Static Shock Function I Important: lithe transmitter IS in sleep mode (the LCD display is turned 0 Take out the test bulb trorn the off) you mustpress the “Y" button once to wake up the unit. then press package and place its metal wire the "Y" button again to send the signal irorn the remote to the collar against the Receiver Collar's receiver. This applies to all iunctions, Contact Points 0 PressModebmtonontheRetmfle Transmitter. switch to Shock Mode. coniirm using the LCD display that the stimulation level is not at 0. you can press the UP/DOWN button on the right side to adjust. Test LED Light Function o Press LED light Button, LED Iightwrll turn on. means LED light button works 0 Press Y button. test bulb will flash. that means Shock iunction works. 0 Note: I! wanting to test the shock function on yourself. please ensure N l _ your finger or hand is across both contact points to ensure the connection o e. is complete. Otherwise, user WI" ieel no stimulation. I: II LCD of Remote Transmitter does notdisplay. there is probably two reasons: 11 1, Light Standby : In order to save power. the Remote Transmitter will go into Standby Mode ifthere is no operation after 20 seconds. press any button except LED Light Button to activate Remoter Transmitter. LCD will display. 2. Deep Sleep: In orderto save power, the Remote Transmitterwfll go into Deep Sleep Mode if there is no operation after 2 minutes. hold the Mode button for 5 seconds to activate the Remote Transmitter, LCD WI” display. II: The receiver collar will go into deep sleep if no operation ror A minutes. And any movement by the dog will activate the receiver. It the Receiver Collar has no response when you press the Y button, and the Indication light of the Receiver Collar is noton either. you can shake Receiver Collaror force the dog to move, and the indication light of the Receiver Collar will show green. which means the Receiver Collar is activate and wrllwork. III: When testing. choose any mode except LED light, When you are under Vibration or Static Shock mode, Intensity Level cannot be at a stimulation level of 0. press UPIDOWN to adjust, 52—; Fit The Receiver Collar with your dogs: Important: The proper lit and placement at your collar is important tor eltective training. The Contact Points must have direct contact with your pet‘s skin on the underside ol the dog‘s neck. 12 To assure a proper tit, please follow these steps' 1. Have your pet standing comfortably (3A). 2. Centre the Contact Points underneath your 0; pet's neck, touching the skin (KB). If yourpet ‘ has a long or thick coat. please use longer Contact Points, we enclosed 2 sets Contact Q Points. short ones and longerones. —here are 100 levels for Vibration and Stimulation. The strong Stimulation can penetrate the hair of the pet and fabric within 6mm thick. Do not shave the pet‘s neck as this may increase the risk of skin irritation. 3. The Collar should fit snugly. yet loose enough to allow one finger to fit between the strap and your pet's necknc) 4 Allow your pet to wear the collar tor several minutes then recheck the lit. Check the lit again as your pet becomes more comfortable with the Collar. CAUTION: Rllk ofskln damage. 0 The Receiver Collar is not designed to be worn constantly. We recommend the Collar not be worn for more than 12 hours out of every 24-hour period. - Most pets feel uncomlortable at first wearing the collar. Don't use any functions until the pet has gotten used to the collar. 0 We suggest you give the dog Vibration before starting the Static Shock. Atter a time 01 training. the dog Will learn that Static Shock Stimulation will come after Vibration. In this way, the vibration alone can effectively curb the Improper deeds ofthe pet. The Stimulation only acts as a menace that might be unnecessary most olthe time. 13 Step 14 Re-Thread the Collar (as diagram) Regular Maintenance Check Contact Points tor tightness weekly. Clean Contact Points with alcohol weekly. Note: remove the battery and discharge Regularthe Bark Automatic Control Collar belore touching the Contact Points. Check your dog's neck ior irritation and wash neck weekly. Frequently A ked Questlons How old do" my pet have to be belore using Petrllner Rechargeable end Waterprooi LCD Remote Pet Tralninu System? Yourpet should be able to recognize basic obedience commands such as “Slt' or"5tay.” Patrainer Rechargeable and Walerprool LCD Remote PetTraining System may be too large for pets under 8 pounds. Once my pet le trained and he! been obeying my eommendl, will my pet have to continue to wearthe ReceiverCollar7 Probably not. You may need to reiniorce training With the Receive Collar from time totlme. can I use Potrelner Rechargeable and Weterprool LCD Remote Pet training System with more than one pot? Yes, there Is 2 series With our Petramer Rechargeable and Waterpraol LCD Remote Pet Training System, one kind is 1V1 t1 Transmitterto 1 Receive Collar ) TT-PT05;the otherone kind is 1V2 (1 TransmittertoZ Receive Collar) TT-PTDG, Will I get exactly 328 yard: 0' range with the Remote Trainer? The eilective range oithe Remote Trainer means the straight-line distance between Remote Transmitter and Receiver Collar without obstacles in between Range may vary according to terrain, weather. vegetation, battery capability as well as transmission from other radio devices. How long can I continuously deliver vibration or Static Shock to my pet 'I The maximum amount oitlme you can press the Vibration or Static Shock to your pet continuously is 10 seconds. Alterthls. the Remote Transmitter wlll time-out, and the Vibration or static Shock must be released and pressed again. Is the Receiver caller waterproof? Yes. yourpet can swim in thewater. 15 What do I do It my pet'e neck becomes red and irritated? Discontinue use ol‘ the Petrainer Rechargeable and Waterproof LCD Remote Pet Training System tor a tew days. lithe condition persists beyond 48 hours, your veterinarian. Once the skin returns to normal. monitor your pet's skin condition closely. Can I ettech e leuh to the Receiver Collar? No. This can result in pulling the Contact Points too tightly against your pet's neck. Use a separate collar placed above the Receiver Collar. How will I know when to charge the betteriefl For Remote Transmitter: the symbol will show up on the right side of LCD screen. For Receiver Collar: will her a beep for 20 seconds, indicating the device needs to be charged. How long Is your lithium battery Iltetlrne? Our Lithium battery can charge 400 times for remote Control and Receiver Collar. How long can I leave Receiver Cellar on mydog? The Collar is not des-gned to be worn constantly. We recommend the Collar not be worn tor more than 12 hour out oi every 24-hour period. How long ehould my trelnlng section: be tor my pet? Training sessions should be kept positive and short. it is better tor about 10-15 minutes long each session. What kind ofdogs are your Petrainer Rechargeable and Waterproof LCD Remote Pet Trelnlng System suitable for? The collar is adjustable lroni length 5.9"(1 5cm) to 19.6“(50cm).it your pet's neck is smaller than 5.9”, you have to rethread it. ifyour pet‘s neck is larger than 22', please don't buy it: and this Collar is not suitable tor the dogs less than 8 pounds either 16 Troubleshooting My pet does not respond after correct installation Petrelner Rechargeable and Weterproot Treinlng Collar. . You need to chargethe Remote Transmitterand Receiver Collarfors hours individually first. 0 You need to turn on the Remote Transmitter By holding the mode button lorSSeconds. 0 Check the levels oi vibration or static shock. Make sure the Receiver has enough power to operate. 0 Restart the Receiver collar by pressing the onloll button. 0 Test4 iunctions (Beep. Light. Vibration and Shock)iirst belore using. See part “Test" oi Operation Guide. I Intensity level has to be more than “0" when pairing. Test launch tor vibration and Static Shock Function. 0 The Receiver Collar Will go into deep sleep if no operation ler 5 minutes and any dog movement will activate the device. 0 Make sure the Contact Points are placed snugly against your pet‘s skin. - Trim your pet's iurwhere the Contact Points touch the neck or switch to the longer Contact Points. 0 ll none at the above works. you can try repairing between the Remote Transmitter and Receiver Collar. (See part “Pairing“ oi Operation Guide) Remote Transmitter does not work. ' You need to charge the Remote Transmitter lor 6 hours when you get product for the first time. 0 Check it the Remote Transmitter is on low battery status. the symbol will show up on the right side ol the LCD screen. ' You need to hold the Mode button on the Remote Transmitterfor 5 seconds to power it the device on. 0 Remote Transmitter automatically goes into standby mode if no action is detected Within 20 seconds, at this time there will he no LCD display. Press any button to re-activate the Remote Transmitter. 0 Remote Transmitter will automatically goes into deep sleep status it no action is detected within 2 minutes. At this time, there will be no LCD display. You have to press "Mode‘ button for 5 seconds until the LCD display reappears. 17 My Receiver Collar works great for Ioma time. but It do" not work anymore after I charged the device. ' First, check it charging is successlul. when you are charging. red LED light will he on, altertully charged. the red led light will turn all automatically The Receiver Collar to damaged and It doesn't work alter being knocked down. C You have to turn on Receiver Collar again alter you're finished charging We turned on the recelver collar and It starts to beep tor 20 seconds. 0 Receiver Collarwill beep for 20 seconds in low battery status unless it gets charged. Charge it for 6 hours and the other lunctions will work altercharging is finished. - Our Receiver Collar is designed to not be knocked down. please don't knock down the device. to avoid breaking structure and circuits. I want to test Rec-Ivar Collar myself. but It does not work. 0 It you test Receiver Collar by your hand or leg. please touch the 2 electrodes atthe same time, only touching one electrode will not work. General Tra n ng Tips The lollowlng are tips on how to get the best out ol your Petralnar Remote Pet Training Collar: (1 ) Make the training sessions short and positive (between 10-15 minutes long (or each time), which will enable yourdog to keep its attention focused on you. (2)Train one dog at a time. (3) During initial training sessions. keep your dog in a familiar outdoor environment e,g. an enclosed area ol the garden and away from other dogs! animals and people. Training in new locations may cause your dog to become distracted causing you to reinlorce your commands with the remote collar- receiver more often collar-receiver more than accordingly. (4) Use a long leash lastened to a hon-metallic collar to help his/her learning. Ensure the additional collar and leash does not Interfere with the skin contact at the metal probes on the collar-receiver. Do not use the remote training collar without a long leash until yourdog ls lully trainedo 1B (5) Vou will have more success by teaching the dog a command first before trying to reinlorce to command with the remote trainer. (6) For basic obedience training. VIBRATION and AUDIO modes are more uselul. (7) Issue an obedience command at a time. which will locus your dog's attention and reduce conlusion. Do not use the remote collar to correct commands that have not already been covered. (8) During training, look tor all the positive changes In your dog's behaviorend remember to reinforce them promptly with ample praise and reward. (9) Avoid over»correcting your dog. Use as law remote corrections as possible during the training process. (10) When your dog has become apparently perplexed. shill the locus ol the training session by drawing his/her attention to a command they are lamiliar with. eg. sit. Give yourdog praise and encouragement galore on successlul completion ol the command. Repeat this several times belore returning to training with remote corrections. (11) It you know a particular misbehavior your dog does. then reinvent this situation during a training session. You WI" have tar more success it you deal with one misbehavior at a time in a controlled Situation, (12) Be consistent: give your dog a tone. vibration or static-stimulation correction lor each misbehavior When reinlorcing a command with a correction, It is critical that you do so Without emotion then immediately praise and reward your dog lor marking the right decision. (13) When your dog seems to react in a timid and frightened lashion to either the tone. vibration or static-stimulation. particularly in early training sessions. do not he ilabbergasted, Shill the locus ol the training session by drawing his! her attention to a command they are lamiliar with. E. G. sit and give your dog abundant praise and encouragement on successful completion ol the command. (14) Do not use Petreiner Remote Pet Training Collar to correct or eliminate form of aggression or biting behavior. When your dog is showing signs of aggressive behaviorthen contact a professional dog trainer in yourvicinity. (15) Please be reminded that you should keep training sessions short and end every session on a high notes Stop training and play with your dog as soon as tie/she has accomplished a new level of proficiency. Ii needing more training tips, please visit us at www.igets-mall.com or www, lacebook.com/ipetsmall lor plenty ol resources. 19 Common size of different dogs . . Chihuahua,Yorkshlre MInI 20-22 25-30 19 Tami” 23 Chihuahua. Yorkshire Small 20-24 29-36 Temier, Poodle, Pomeranian Medium 23-28 35-42 28 Maltese Dog, Shih Tzu Large 27-31 41-47 31 yg'flag’gf‘mam“ Large 30-34 46-53 35 mf~ 5"”"5" cm” Large 33-37 52-59 40 Beagle Huge 43-48 76-84 so Husky 47-52 88-97 65 Labrador Retriever 52-62 92-100 70 ewe“ ““9"”- °"’ English Sheepdog LIMITED 90 DAYS WARRANTY Petrainer warrants this product to be free ofdefects in parts, materials and workmanship for a period of 90 days, from date of purchase, Should any repairs or servicing under this warranty be required, contact CustomerService by phone oremail for Instructions on how to pack and ship the product to Petrainer. Petrainer CUSTOMER SERVICE Telephone: 1-866-877-7949 Email: service@juxininc.com Hours: Weekdays 9:00 AM- 5:00 PM EST This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 20 FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur In a particular installation. lfthis equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. ~ Increase the separation between the equipment and receiverr ' Connect the equipment to an outlet on a circuit different from that to which the receiver is connected This device complies with part 15 ofthe FCC rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation. Note: Modifications to this product wlll vold the nu equipment. uthorlty to operate this 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : vincent Create Date : 2015:09:17 10:05:40+08:00 Modify Date : 2015:09:17 10:05:40+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : vincent Title : Microsoft Word - 文档 1 Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 10.1.0 (Windows) Document ID : uuid:3034dfc7-dccf-400d-9c00-335004d04eb4 Instance ID : uuid:2a846db7-b7cd-4087-8dca-17a873f06b60 Page Count : 11EXIF Metadata provided by EXIF.tools