JJPlus JWX6058 11ac/abgn 2T2R WIFI & BT Half Mini-PCIE Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3942348
Application ID	FeBgZOgr0dX0buLD6h1a5w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.2kB (127481 bits)
Date Submitted	2018-07-30 00:00:00
Date Available	2018-07-30 00:00:00
Creation Date	2018-07-04 14:08:41
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-07-04 14:08:41
Document Title	Microsoft Word - JWX6058_FCC審驗資料.xlsx 的文件
Document Creator	PScript5.dll Version 5.2.2
Document Author:	PCUser

User Guide
jjPlus CORP.
13F‐3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Product Overview
The devices Mini PCI-e adapter cards contain an Atheros chip for Wireless LAN and
Bluetooth applications. The mini PCI-e adapter cards support key security features like Wi-Fi
Protected Access (WPA), WPA2, WEP, 802.1x and Bluetooth v4.2.
Typical application of the card is integration into other wireless products such as AP/ Router
which is used distance 20 cm away human body.
Packaging Contents
The mini PCI-e card package contains the following item(s):
1 x Wireless Mini PCI-e Adapter
Installation guide
 Shut down the power of the platform
 Align the Mini PCI-e adapter with the Mini PCI-e socket on the platform
 Adjust and push down the Mini PCI-e adapter gently until the metal locking levers on the
Mini PCI-e socket is latched. (Please take note that the Mini PCI-e adapter can only fit in
one direction due to the keyed notch. Wrong orientation will cause improper installation
and may damage the Mini PCI-e socket)
 Connect the antenna(s) on the mini PCI-e module
 Reboot on the platform
 Install drivers if necessary
Frequency
2412 ~ 2462 MHz
5180 ~ 5240MHz, 5745 ~ 5825MHz
Connector: Reverse U.FL PLUG
jjPlus CORP.
13F‐3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one of
the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices).
End Product Labeling
This transmitter module is authorized only for use in devices where the antenna may be installed such
that 20 cm may be maintained between the antenna and users. The final end product must be labeled
in visible area with the following: “Contains FCC ID: W23-JWX6058”
”
End Product Manual Information
The user manual for end users must include the following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used
for this transmitter must be installed to provide a separation distance of at least 20cm from all persons
and must not be colocated or operating in conjunction with any other antenna or transmitter.” This
device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)
This device may not cause harmful interference and (2) This device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or colocation with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for reevaluating the end product (including the transmitter) and
obtaining a separate FCC authorization. This device is intended only for OEM integrators under the
following conditions: The antenna must be installed such that 20 cm is maintained between the
antenna and users. As long as a condition above is met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end product for any additional
compliance requirements required with this module installed (for example, digital device emissions,
PC peripheral requirements, etc.).
jjPlus CORP.
13F‐3, No.120, Qiaohe Rd., Zhonghe Dist., New Taipei City 235, Taiwan

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : PCUser
Create Date                     : 2018:07:04 14:08:41+08:00
Modify Date                     : 2018:07:04 14:08:41+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - JWX6058_FCC審驗資料.xlsx 的文件
Creator                         : PCUser
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:7596ac59-73fd-4f36-b5ff-e44ddbc52318
Instance ID                     : uuid:9c0c8166-36f1-4ab0-b802-bdfd50cbca64
Page Count                      : 3

EXIF Metadata provided by EXIF.tools