JLT Mobile Computers 1213 Vehicle Mount Computer User Manual
JLT Mobile Computers AB Vehicle Mount Computer
Contents
- 1. User Manual
- 2. Users Manual
User Manual
JLT1213 User manual JLT Mobile Computers AB Isbjörnsvägen 3 SE-352 45 Växjö, SWEDEN Phone: +46 470 530300 Fax: +46 470 445 29 E-mail: mailbox@jltmobile.com www.jltmobile.com JLT1213, User manual Rev 0 © 2008, JLT Mobile Computers AB Note! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by JLT Mobile Computers could void the user's authority to operate the equipment. Content Content Content ..............................................................................................1 General...............................................................................................1 JLT1213 ..............................................................................................1 Front view.......................................................................................1 Rear view .......................................................................................2 Features..............................................................................................2 Accessories.........................................................................................3 Function buttons .................................................................................3 Using the JLT1213 ............................................................................4 Turning on the JLT1213......................................................................4 Shutting down the JLT1213 ................................................................4 Reset...................................................................................................4 Screen brightness ...............................................................................4 Instant blanking...................................................................................4 Touch screen ......................................................................................5 External device connections ...............................................................6 USB 2.0 ..........................................................................................6 Ethernet port...................................................................................6 PC Card Slot ..................................................................................6 Boot Media .....................................................................................7 Suspend modes ..................................................................................7 Stand by mode ...............................................................................7 Suspend to Disk mode ...................................................................7 Resume from suspend mode .........................................................7 Maintenance ......................................................................................8 Cleaning..............................................................................................8 Intel Celeron 1 GHz ..........................................................................10 Touch screen................................................................................10 UPS Operation .............................................................................10 UPS ..............................................................................................10 UPS battery warning ....................................................................10 Interface specification ....................................................................12 Power cable ......................................................................................12 Switch buttons...................................................................................12 Technical specification ..................................................................13 Content Physical dimensions...................................................................... 14 General General JLT1213 The JLT1213 is a compact high performance and low weight rugged PC. The 1213 can withstand severe environmental conditions including vibration, shock, moisture and temperature variations. The 1213 is suitable for use in harsh environments such as construction sites, warehousing, defense and manufacturing. Front view 1. 2. 3. 4. 5. 6. Aux wlan-antenna BT antenna Main wlan-antenna Increase brightness Decrease brightness Power button General Rear view 1.) USB Connector 2.) Ethernet connector 3.) Power cable 4.) Cable strain relief Features • • Rugged, ergonomic, 1-piece design makes the 1213 ideal for all vehicle applications. 4x USB 2.0 ports General Accessories Function buttons No Function Decrease brightness Power button with power LED Increase brightness Using the JLT1213 Using the JLT1213 This chapter covers information about using the JLT1213. The use of the JLT1213 does not differ from normal PC use. Turning on the JLT1213 To turn on the JLT1213 press the power button for one second, see chapter “Function buttons” on page 3. The power LED lights up. Shutting down the JLT1213 Before shutting down the system save your work and close all running programs. To shut down the system press the power button or choose Shut Down from the Windows Start menu. Reset If the JLT1213 is not responding to commands, the system or application may have crashed. To restart the system press and hold the power button until the power LED is switched off. Screen brightness The screen brightness can be adjusted for indoor or outdoor use. To increase or decrease the screen brightness push the brightness push button on the side of the JLT1213. Using the JLT1213 Touch screen The JLT1213 has a resistive 4-wire Touch Screen for easy integration, which allows the user to work with gloves. WARNING! Do not use sharp objects when operating the touch screen. Selecting To select an object on the screen tap the object once. Double click To double click tap the object twice. Drag object To drag an object on the screen, press and hold down on the object while dragging it to the new position. Release the object when it is in place. Calibrate When used for the first time or when users work in different angles, the touch screen may require calibration. To calibrate the touch screen do the following: 1. Open the Control Panel from the Windows Start menu. 2. Double-tap the Pointer Devices icon. 3. Select the Calibration tab and click the Calibrate button to start calibration. 4. Follow the instructions on the screen. To test the new settings click the Test button. Using the JLT1213 External device connections No Description USB 2.0 ports Ethernet 10/100 Power connector 18-72V USB 2.0 The JLT1213 is equipped with four USB ports that can be used to connect external devices. Connected devices may require additional drivers or software which usually is included with the device. The port supports 500 mA. Ethernet port The local area network (LAN) connector allows the connection of the JLT1213 to a local area network with 10/100 IEEE 802.3 (Ethernet) Interface. Connect the JLT1213 using a RJ45 Ethernet cable. Using the JLT1213 Boot Media Compact flash beneath left lid from front (display) Compact Flash Card Suspend modes The operating system makes it possible to suspend system operation of the JLT1213 without closing programs. The suspend modes are used to reduce power consumption. The JLT1213 can be configured to suspend operation automatically when inactive. Stand by mode In stand by mode the power to unnecessary functions are turned off. Suspend to Disk mode In the suspend to disk mode, the current data is saved to the disk and the JLT1213 is powered off. When the JLT1213 is in suspend to disk mode the power consumption is the same as in the off state. Resume from suspend mode To resume from the suspend modes, press the power button described in “Function buttons” on page 3. Maintenance Maintenance The JLT1213 is maintenance-free, except for normal cleaning. All setting, i.e. date and time etc, should be done through the interface of the operating system, just like on any non-rugged PC. Cleaning The display/touch screen should be cleaned with glass cleaning agent, made for that purpose. Caution! You must avoid oil on the Touch Screen because it can be difficult to remove. Keep the JLT1213 clean and free from dust and dirt by using a soft, lint-free cloth regularly. If available, you can also use compressed air (maximum pressure 2 bar) but some caution is to be observed. WARNING! No sharp objects or tools should be used when cleaning. Maintenance Intel Celeron 1 GHz Device Processor Intel Celeron 1 GHz Memory Up to 1 GB Graphics Intergrated with Intel Graphics Media Accelerator. Boot media Compact Flash Ethernet Intel 82562 10/100Base-T Fast Ethernet Controller Touch screen The touch screen interface on JLT1213 is built with the UPDD screen coder version 04.00.06 (Valid: 2008-08-28) Normally calibration is necessary only once, calibration data is stored in Windows Registry files. UPS Operation UPS The JLT 1213 is equipped with a UPS battery, which is located under the right hand side top lid. The purpose of UPS battery is to supply power during a short loss of power eg. when a battery is changed on the forklift. During operation on UPS the screen brightness is set to minimum to conserve battery power. It is not possible to start computer on UPS supply. Empty to Full charge time is approx. 4 hours. UPS battery warning The UPS is equipped with a low battery warning system. Keyboard Sleep button is sent as a first warning of low battery level. Keyboard power button is sent when power level is critical. 10 11 Interface specification Interface specification Power cable Pin No. I/O Description Power 18 to 72 V, nominal 25 W, max 45 W GND Power return (0 V). Note! The JLT 1213 have separated power grounds. The cabinet and power return (0V) are not connected together, negative ground. Switch buttons on the side. 12 Technical specification Technical specification Base system Processor: 1 GHz Celeron RAM Memory: Up to 1GB Display: 12.1" SVGA 400 nit Graphics: Integrated with Intel Graphics Media Accelerator (82852GME) Dual Independent Display Support Storage: Compact Flash Interfaces: Four USB 2.0 One Ethernet 10/100-TP, RJ45 Power supply: 18-72 VDC (Standard wide input) 5W standby / 20W operating, Max 45W Dimensions: 305 mm (w) x 240 mm (h) x 59 mm (d) Weight: 3.6 kg Environment: Operating -20°C (-4F) to 50°C (122F) Storage -30°C (-22F) to 70°C (158 F) Humidity: 10 - 90% RH, non-condensing Storage: 5 - 95% (Non condensing) 13 Physical dimensions Physical dimensions 262,96 238,76 24 24 24 61,5 75 135(2x) 240 36,5(2x) 59,3 28,7 16 141,25 M6 (4x) deep 15mm 29,5 M6 (4x) deep 8,5mm 115 7,5 75 290(2x) 14,4 305 14 JLT Mobile Computers AB Isbjörnsvägen 3 SE-352 45 Växjö, SWEDEN Phone: +46 470 533000 Fax: +46 470 445 29 E-mail: mailbox@jltmobile.com www.jltmobile.com JLT1213, User manual, Rev 0 © 2005, JLT Mobile Computers AB
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2008:09:08 10:23:14Z Creator Tool : FrameMaker 7.1 Modify Date : 2008:09:08 13:22:23Z Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:4f5f9030-7037-4188-a798-cfcb2ccbacd9 Instance ID : uuid:e8736114-d1fe-4fb0-958a-5d2bc91a9550 Page Count : 20 Creator : FrameMaker 7.1EXIF Metadata provided by EXIF.tools