JSW Pacific DW700 2.4GHz Wireless Digital Transceiver Module User Manual DW 700 1

JSW Pacific Corporation 2.4GHz Wireless Digital Transceiver Module DW 700 1

Manual

DW-700 User Manual PRODUCT 2.4GHz Wireless Digital Transceiver Module MODEL NO. DW-700 DATE Mar. 2008 DATE Mar. 2008 普行科技股份有限公司 JSW PACIFIC CORPORATION 3F-3, No. 700, Chung-Zheng Rd, Chung Ho City, Taipei Hsien, Taiwan 235 TEL : (02)8227-8582 FAX : (02)8227-8583 http : //www.jsw.com.tw
DW-700 2.4GHz Wireless Digital Transceiver Module FCC Compliance Information1 This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment contains module , FCC ID LE2DW700, which qualifies as an UNLICENSED MODULAR TRANSMITTER per FCC Public Notice DA 00-1407. It has been tested and found to comply with Part 15.247 of the FCC Rules. This module has been designed for use by the JSW Pacific Corp. Required labeling. Any device incorporating this module must include an external, visible, permanent marking or label which states: “Contains FCC IDLE2DW700.” Failure to comply with this requirement will void the user’s authority to operate any device that incorporates this module. This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio(SAR). Features  Auto ACK & retransmit  On the air max. data rate 2Mpbs  Digital interface (SPI) speed 0~8 Mbps  Software selectable channel form 2402~2478MHz (39 Selectable channels)  Short switching time enable frequency hopping  Power supply range:3.6V  Minimum number of external component  Low power consumption: 3.6V, 50mA  Transmission distance: 150 m (Line of sight)  Outline: 23.2 x 20.8 x 4.3 mm  CE 300 328 and FCC 15.247 certificated
DW-700 2.4GHz Wireless Digital Transceiver Module Applications  Keyless Entry  Wireless data communication  Alarm and security systems – Wireless home security, Video Door Bell, Video door phone  Home automation  Surveillance – Wireless P-CAM, Video Baby Monitor  Automotive – Wireless Vision-Based Robotic System, Automotive Accessory  Intelligent sports equipment, Video Rockie-Talkie  Toys – Camera Radio Controlled Toy DW-700 2.4GHz Wireless Digital Transceiver Module Specification Limits Unit Parameter MIN TYP MAX Power Section Supply Voltage 3 3.3 3.6 V Supply Current in Tx mode 30 34 38 mA Supply Current in Rx mode 17 18 19 mA Digital Input Section High level input voltage 2.1 － 2.25 Vp-p Low level input voltage 0 － 1.1 Vp-p Digital Output Section High level output voltage 2.7 － 3.6 Vp-p Low level output voltage 0 － 0.3 Vp-p RF Section Frequency Range 2402 － 2478 MHz Modulation Type GFSK Channel Bandwidth 2 MHz Conducted TX Power 9 12 14 dBm RX Sensitivity -72 dBm Operation Operating Temperature -20 － +50 ℃
DW-700 2.4GHz Wireless Digital Transceiver Module Pin Description No. Symbol Function 1 VCC Power Supply 2 GND Ground 3 IRQ Maskable interrupt pin 4 MISO Master Input, Slave Output (output from slave) 5 MOSI Master Output, Slave Input (output from master) 6 SCK Serial Clock (output from master) 7 CSN Chip Select 8 CE Chip Enable Activates RX or TX Mode 9 × × 10 GND Ground

Navigation menu