JSW Pacific UDS6 DIGITAL WIRELESS SURVEILLANCE SYSTEM User Manual 1

JSW Pacific Corporation DIGITAL WIRELESS SURVEILLANCE SYSTEM 1

Contents

User Manual 1

UDS655Wireless Video Surveillance System
CUSTOMER CAREAt Uniden®, we care about you!If you need assistance, please do NOT return this product to your place of purchase. Our customer care specialists are available to serve you.Quickly find answers to your questions by:1. Reading your owner’s manual, included with this product.2. Visiting our customer support website at www.uniden.com.3. Calling our customer care specialists at 1-817-858-2900 or 1-800-658-8068.
Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden expects consumer’s use of these products to be in compliance with all local, state and federal law. For further information on video surveillance and audio recording legal requirements, please consult your local, state and federal law.© 2013. All rights allowed by law are hereby reserved.CONTENTSGetting Started ...........................................................................4Using This Manual ......................................................................................4What’s Included ...........................................................................................5Setting Up the Equipment ......................................................................6Set Up the Camera ................................................................................. 6Set Up the Monitor ................................................................................8Pairing Accessory Cameras to The Monitor ......................................9BASIC OPERATION .................................................................. 10 Getting to Know Your Monitor .......................................................... 10Screen icons .......................................................................................... 11Getting to Know Your Camera ............................................................ 13Basic Operation Rules ............................................................................. 13Using your UDS655 ................................................................................. 14UDS655 Screen Descriptions .................................................. 16UDS655 Main Menu Screen ................................................................. 16Camera Setup Screen ............................................................................. 18Pair a New Device ................................................................................ 19Image Brightness................................................................................. 20Activate/Deactivate ............................................................................ 21Recorder Setup ......................................................................................... 21Record Schedule .................................................................................. 22Motion Detection Sensitivity .......................................................... 24Format Storage .................................................................................... 25Setup Masking Area ........................................................................... 25Event List ..................................................................................................... 27Play Back Recorded File .................................................................... 28Delete Recorded Files ........................................................................ 29System Setup............................................................................................. 29Date and Time ...................................................................................... 30TV Output ............................................................................................... 30Power Saving ........................................................................................ 30Multi Channel Idle Display ............................................................... 31Default ..................................................................................................... 32Alarm Buzzer.............................................................................................. 33Pan Tilt Zoom ............................................................................................ 33Scan Activated Cameras ........................................................................ 35Memory Card OverWrite ....................................................................... 35SPECIAL FEATURES .................................................................. 37Remote Access .......................................................................................... 37System Requirements ........................................................................ 37Install Uniden Remote Service Software..................................... 38Setting up a Portal Account ............................................................ 41Using Remote Access ........................................................................ 44Record Video Through the Portal ...................................................... 44Take A Snapshot Through the Portal ................................................ 45Play Back Recorded Files on Your PC ................................................ 45View Live Video on TV ............................................................................ 45Downloading and Using the Apps ......................................... 47AndroidTM ................................................................................................................................................................................ 47Download .............................................................................................. 47App Operation ..................................................................................... 48iPhone® ........................................................................................................ 49Download .............................................................................................. 49App Operation ..................................................................................... 50Maintaining Your System ....................................................... 52Upgrading your Uniden UDS655 Firmware ................................... 52Taking Care of Your Hardware ............................................................ 52Receiver .................................................................................................. 52Cameras .................................................................................................. 52Solving Problems..................................................................... 53Specications ........................................................................... 56
4GETTING STARTEDUSING THIS MANUALThis manual is set up in seven sections: •Getting Started. This section lists the hardware that should have been in your box and how to physically set it up. If any items are missing or damaged, contact our Customer Care Line immediately (817-858-2929 or 800-297-1023). •Basic Operations. This section describes your equipment's function keys in detail. It also provides a list of basic operations in an abbreviated format, referencing screen details in the third section. •Uniden UDS655 Screen Descriptions. Here you will find detailed descriptions of each screen and how it is used. •Special Features. This section tells you about the UDS655 special features, such as how to connect your surveillance system to the internet and access it from your PC or other wired/wireless devices. •Downloading and Using the Apps. Here you will find instructions for downloading the Uniden Gurardian app for Android based smartphones and iPhones and how to use them with your system. •Maintaining Your System. This section provides tips on how to keep your UDS655 hardware clean and in excellent working condition. •Solving Problems - Troubleshooting tips are located here. •Specification - This last section contains hardware and software specifications.If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products!
5WHAT’S INCLUDEDCH-CH+VOL+MVOL-ESCREC/DELZOOMALARM7” LCD Digital Wireless Monitor (1)Digital Wireless Camera (2) Camera Antenna (2)Camera Stand (2) 5V/1A Power Adaptor for Monitor / Camera (1)Uniden Media Player andRemote System software CD (1)A/V Cable Extension Cable for Camera Adaptor (2)Screw Bag (1)OWNER’S MANUAL4GB microSD™ Card and Adapter (1 each)Manual (1) USB cable
6SETTING UP THE EQUIPMENTSet Up the CameraGeneral Placement GuidelinesThe Uniden UDSC15 cameras included with your monitor are weatherproof and have an IP66 weather rating. Water can be sprayed on them and they will still work; however, the cameras cannot be submerged underwater. Although the cameras can be exposed directly to the rain, it is recommended that, if they are used outdoors, they be mounted under some type of cover like a patio overhang or eave. As rainwater drops start to dry on the camera glass, it can create spots that will reflect the light from the infrared LEDs used for night vision, thus causing lower quality video.Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.Consider the following when placing cameras: •Clear line of sight video transmission distance is up to 500 ft. — Walls, especially brick and concrete, shorten the transmission distance. — Placement next to windows allows better transmission. •Avoid having a direct light source in the view of the camera, including street lights, ceiling or floor lamps, spotlights in the driveway, etc. •The cameras are equipped with built-in infra-red LEDs so you can use night vision for 24-hour surveillance. The LEDs will automatically activate at night and the picture viewed will turn to black and white. The night viewing range is up to 40 ft. Avoid pointing the camera lens directly at clear glass; the night vision LEDs will cause a blurred image. •Optimized motion detection range is 6 - 18 feet for the UDSC15 camera. The farther away an object is, the less accurate the motion detection.
7 •Avoid pointing the camera directly at any bushes, tree branches, or moving objects that might naturally move due to winds. Otherwise, the motion detection feature may record unnecessarily. You can mount the camera with the stand on the bottom (on a flat surface such as a table-top), on the side (on a wall), or on the top (on the ceiling). When you are positioning the camera, you might want to bring the monitor along; it’s much easier to get the camera into the right position when you have the display handy.Mount the Camera BaseThe following tools are required: •Electric Drill •5mm Drill Bit •15mm Drill Bit •No. 2 Philips Screwdriver1. Hold the base of the camera stand where you want to mount it and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. You can also screw the base into a flat surface such as a tabletop if needed.3. Before attaching the camera, tug gently on the stand to make sure it is securely in place.
8Attach the camera1. For each camera, attach the camera bracket to the mounting screw. You can attach the stand to the top or the bottom of the camera as needed.Tighten it a few turns, then turn the camera to face the direction you want. 2. Tighten the camera brace up against the camera to secure it into place.3. Unlock the mounting post by turning the wingnut to the left a few turns.4. Set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place.5. Attach the antenna to the rear of the camera. 6. Connect one end of an AC adapter to the camera’s power pigtail and plug the other end into a 120 volt AC (standard indoor) power outlet. (If necessary, connect the extension cord to the camera’s pigtail and connect the AC adapter to the extension cord.)Be sure the power plug and the connector are tightly twisted together to avoid water leaking in.7. Make sure the Power status light turns on. If it doesn’t, try reconnecting the AC adapter, and make sure the power outlet isn’t controlled by a wall switch.Set Up the Monitor1. Remove the protective plastic from the monitor screen.2. Flip out the stand on the back of the monitor and extend the antenna. 3. Connect an AC adapter to the power input on the side of the monitor. 1243Loosen the wingnut to unlock the mounting post.Attach the camera to the mounting screw and turn it to the desired direction.Adjust the post to the correct angle, then tighten the wingnut to lock the post into place.Tighten the brace against the camera tosecure itin place.
94. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.5. Press and hold the POWER button on the top of the monitor for 1 - 2 seconds to power it up.If... Try this...there is no camera picture Verify that the power supply adapter for the camera(s) is plugged in.the picture quality is poor Clean the camera lens.a white image appears at nightThe camera’s infra-red LED shines invisible light that reflects off surfaces such as glass, causing white light. Place the camera on the other side of windows with the lens flush against the surface to improve the night vision, or place the camera in a well-lit area. 6. The monitor displays the Uniden title screen and then displays the LIVE view.7. After the system powers on, adjust the camera viewing position if needed.PAIRING ACCESSORY CAMERAS TO THE MONITORThe two cameras that come with your UDS655 are paired to your monitor at the factory. If you add cameras, install them and then pair the camera to the monitor.1. From the main menu, select CAMERA SETUP and press M. Scroll to the camera number you want to assign to the new camera. Press M. 2. Press CH+ to scroll to the pairing option. Press M to pair the camera.3. Within 30 seconds, press the PAIRING button on the camera's power cord.Pairing Button
10BASIC OPERATION GETTING TO KNOW YOUR MONITOR12123456789101112Your monitor operates in three modes: M, Playback, and Record. The monitor's keys may operate differently based on what mode it is in. Key M (MENU) Playback REC Mode Other1 Link LED (Green)2 Power/Charge LED (Red)3 Channel Switch (CH)Cursor Left Change Camera ()
11Key M (MENU) Playback REC Mode Other4Volume - (VOL)Cursor Down Skip Backward (◄◄)5Volume (VOL+)Cursor Up Skip Forward (►►)6 Channel Switch + (+)Cursor Right Change Camera +7MSelect / Enter Pause/Play (►|| )8ESCEsc/Exit/Back Esc/Exit/Back9 Record/Stop (REC/DELPrevious File (|◄) Stop10ZOOMFull Stop ()11ALARMNext File (► |)12 Power ButtonScreen icons Icon MeaningSignal Indicator1Channel IndicatorRecording Indicator (Red)
12Icon MeaningDisplay Modes Quad Display Scan Display Camera Displayed There are seven audio levels.Monitor Power IndicatorYYYY-MM-DDAMhh:mm:ss Date and Time X1In ZOOM mode - Zoom Level Indicator.X1 - Normal view.X2 - Second level of zoom in (X2 Zoom).
13GETTING TO KNOW YOUR CAMERA1110189234561. Antenna 5. Link LED (Green) 9. Power Jack2. Light Level Sensor 6. IR LED (25) 10. Microphone3. Power LED (Red) 7. Camera Stand 11. Power Adaptor4. Camera Lens 8. Pairing KeyBASIC OPERATION RULES •The Pairing LED on the camera will blink once to indicate pairing process has begun and then remain solid to indicate pairing success and data transmission is in progress. •The UDS655 will return to QUAD mode from any screen after the monitor is idle for two minutes. •The UDS655 cannot begin recording if the memory card is not inserted. •After recording begins, it cannot be stopped within the first 15 seconds. Refer to RECORDER SETUP, page 22, for details.
14 •The UDS655 can record in QUAD mode (all 4 channels recorded simultaneously), with each channel in 320 x 240 resolution. If only one camera is turned on (Camera Setup), then the UDS655 records that camera in full screen (640 x 480). •Press and hold POWER for 1 second to turn on the system. •Press and hold POWER for 2 seconds to turn off the system.USING YOUR UDS655To... Do ThisChange from quad view to single view (or back)With the screen in quad view, press CH+ or CH to cycle your cameras in full view mode. Once all cameras have displayed, the next press takes you back to quad mode.Manually start recording Press REC/DEL button. Refer to RecoRdeR Setup, page 22, for details.Set up to record automaticallyRefer to RecoRdeR Setup, page 22, for details.Manually stop/cancel recording in Manual or Motion modePress REC/DEL.Manually cancel a Scheduled Record(either future recording or currently recording)Because this recording block has been pre-set to record for a specific amount of time, you must reset that recording block from Schedule to Manual or Motion Detect. Press REC/DEL after the recording has been going for 15 seconds and quickly (within 5 seconds) press M. The main menu displays. Go to RECORDER SETUP/RECORD SCHEDULE and press M. Select X : MANUAL and press M again. Navigate to the block containing the recording in progress’ time frame. Press M until X : MANUAL is selected. Press ESC to back out of the screens.Refer to RECORDER SETUP, page 22, for details.
15To... Do ThisPlaying back a recording Select the record to play back (event LiSt, page 27) and press M.Cancel watching a recorded videoPress ESC. The event LiSt screen with video files for a selected date and time displays.Watching recorded video on PC or televisionTo view on PC: Either place the memory card in the PC's memory slot or transfer the recorded files from the memory card to the computer.Uniden Media Player must be installed; it is included on the CD.To view on TV: Use the AV cable to connect the monitor to the TV (refer to page 37).Set the date and time See SyStem Setup, page 29.Transfer a recording from the monitor's SD card to the computer.Remove the memory card from the monitor and insert it in an adapter. Insert the SD adapter into your PC. Select a destination to store the files.Watch live video on your smartphoneSee page 45 for details on downloading and using the apps.
16UDS655 SCREEN DESCRIPTIONSUDS655 MAIN MENU SCREENThe UDS655 main menu lets you select from 8 screens to set your system preferences, from camera brightness to setting up and viewing recordings. This section describes the screens in detail. It provides a path to the screen being viewed and operation procedures for that screen.Press M to enter the main menu. Use CH+, CH, VOL+, and VOL to scroll through the screen selectons; the title of that screen dispays as you scroll onto it. Press M to select that screen.
17Screen Sub Screens What it DoescAmeRA SetuppAiRinG Pairs new cameras to the monitor.BRiGHtneSS Brightens or darkens the video of that camera.ActivAte oR deActivAteMakes the cameras visible to the monitor.RecoRd SetupRecoRd ScHeduLeSets up a schedule for pre-determined recording times and lengths.motion detection SenSitivityRecords when something moves in front of the camera. Continues recording for 2, 5, or 10 minutes. Motion detection is on by default.FoRmAt StoRAGeFormats memory card.Setup mASKinG AReAMasks off areas from motion detection.RecoRd time Sets the length of recording to 2, 5, or 10 minutes.event LiSt event LiSt Selects and plays back recorded video.SyStem Setup dAte And time Sets date (year/month/day) and time (hour/minute)tv putput Sets TV output to PAL or NTSC format. (Default = NTSC)NTSC is the TV standard for North America. poWeR SAvinG Sets the idle time required (5 or 10 minutes) before the system changes to power saving mode. ALWAyS on blocks Power Saving mode).muLti cHAnneL idLe diSpLAySets how the cameras will display during Idle mode (Quad mode or in 5-, 10-, or 15-second display cycles).deFAuLt Sets default language (English, French, or Spanish).
18Screen Sub Screens What it DoesALARm BuZZeR nA You can set the alarm buzzer to sound when movement triggers a motion sensitive recording. Set it to ON or OFF.The SD card must be inserted and have sufficient space for the alarm buzzer to operate.pAn tiLt Zoom nA Zooms in and adjusts the viewing areaScAn ActivA-ted cAmeRAnA Activates SCAN mode.memoRy cARd oveRWRitenA Allows the oldest files to be deleted when you want to record but the memory card is full.CAMERA SETUP SCREENFrom this selection on the main menu - This screen should display: The SETUP DETAIL OPTIONS screen has three options: •Pair a New Device •Image Brightness •Activate or Deactivate
19Pair a New DeviceYour cameras are paired to the monitor at the factory to channels 1 and 2. You can add up to 2 more accessory cameras to your system; see our website at www.uniden.com for more information on how to buy accessory cameras for this system. When you add an accessory camera, you have to pair it to the monitor (that is, you have “introduce” the camera and monitor so they can communicate). Some things to know about pairing cameras: •If a camera is already assigned to the selected channel, the monitor overwrites that camera link with the new one. •Only pair one camera at a time! The monitor links to the first camera it detects. If two or more cameras are in pairing mode, you can’t control which camera the monitor will detect first.1. From the SETUP DETAIL OPTONS screen, use VOL+ and VOL to select the camera being added. Press M. The PAIR A NEW DEVICE screen highlights the Pairing selection. 2. Press M again to begin camera pairing.
203. Quickly (within 30 seconds) press the PAIRING key on the camera cable. The green Pair LED on the selected camera blinks once, pauses, and then stays on to indicate that data transmission is in progress. PAIRED displays on the screen if pairing is successful or PAIRING FAIL if it isn’t. If Pairing fails, repeat these steps. If Pairing fails again, move the camera and monitor closer together and repeat. Press ESC to back out and return to the main menu or press VOL+ or VOL to select another camera to pair.Image Brightness1. With the SETUP DETAIL OPTIONS screen displayed for a camera, press CH+ to highlight the Brightness selection.2. Press VOL+ or VOL to adjust the camera’s brightness; the five levels are OFF, 1 - 4. The default level is 2.3. Press M to accept the new setting and return to the SETUP DETAIL OPTIONS screen. Select another camera if needed.
21Activate or DeactivateThis feature "turns off" the camera so it won't be viewed on the monitor. The camera is still powered on, just not visible to the monitor. This feature is useful for viewing a single camera in full screen mode constantly and to record that camera in full screen (640 x 480) resolution. 1. With the SETUP DETAIL OPTIONS screen displayed for a camera, press CH+ to highlight the Camera Activation selection.2. Press CH+or CH to activate or deactivate a camera/Cameras not paired to the system cannot be activated. 3. Press M to accept the new setting and return to the SETUP DETAIL OPTIONS screen. Select another camera if needed.RECORDER SETUPYou can only record if the monitor is in LIVE view and an SD card is inserted.
22From this selection on the main menu - This screen should display: The RECORDER SETUP screen has five options: •Record Schedule •Motion Detection Sensitivity •Format Storage •Setup Masking Area • Motion Record TimeRecord ScheduleRECORD SCHEDULE lets you schedule recordings in 1 hour blocks. All active cameras will record; if you only want to record from specific cameras, turn off the other cameras. During LIVE view, audio is only available for camera 1 by default.Recording options are: •Motion (M). Select this option if you want the camera to record only when it detects motion. •Schedule (S). Use this option if you want the cameras to automatically record during a specific hour block.
23 •Manual (X). Select this option if you want to be able to press the REC/DEL to record. You can also use this option when you want to combine recording options for a 24 hour period. Assign MOTION or SCHEDULE recording mode to all cameras1. From the main menu, select RECORDER SETUP. The RECORD SCHEDULE screen displays with the latest camera recording settings. 2. Press M to show the recording options 3. Press CH+ and CH to highlight either MOTION or SCHEDULE. Press M to select it. All recording blocks now display the recording option abbreviation (M or S). 4. Press ESC to back out of those screens. Combine recording modes1. From the main menu, select RECORD SETUP. The RECORD SCHEDULE screen displays with the latest camera recording settings. 2. Press M to show the recording options, and then press CH+ and CH to select MANUAL. A blue bar displays at the top of the first hour block. The blue bar indicates you can now navigate to different hour blocks.
243. Press CH+, CH, VOL+, and VOL to select the hour block you want. Press M to change the recording option for that hour block. 4. When you have set the recording option you want, simply navigate to another block.5. Once you have set the hour blocks as you want them, press ESC to back out of the screens. Motion Detection SensitivityThis screen lets you adjust how much motion activity will trigger a motion detection. When motion detection is on, the live video vide will display an active blue box around the object that triggered the motion event.1. From the RECORDER SETUP screen, press VOL+ and VOL to select MOTION DETECTION SENSITIVITY; press M to enter. 2. Press CH+ and CH to select the camera for motion detection sensitivity adjustment.3. Press VOL+ and VOL to adjust sensitivity level – OFF (no box highlighted)/ LEVEL 1 (low) / LEVEL 2 (medium) / LEVEL 3 (high).
254. When you have finished setting the camera's motion sensitivity levels, press ESC to accept the settings and press ESC again to back out.Format StorageThis feature will delete all data on the microSD card, including recorded files.1. From the RECORDER SETUP screen, use VOL+ and VOL to select FORMAT STORAGE; press M to select it. MENU : CONTINUE FORMAT heading displays.2. Press ESC to exit or M to initiate the memory card format process.3. FORMAT OK displays when complete. Press ESC to back out.Setup Masking AreaYou can mask off areas in the camera's view where movement in those areas could be normal, but also trigger recording (i. e., bushes and trees).
261. From the RECORDER SETUP screen, use VOL+ and VOL to select SETUP MASKING AREA; press M to enter. The SETUP MASKING AREA screen displays: 2. Use CH+ and CH to select a camera (1 - 4) for setting up the masking area. Press M to enter the camera masking preview page.3. A grid displays over the image on the screen. While in masking preview, use CH+, CH, VOL+, and VOL to select the masking block(s) where motion is to be ignored. Press M to confirm each selection. You can also press M again to unmask a block.4. Press ESC to save the entire mask and return to the previous screen. Mask other cameras as needed.Record TimeUse RECORD TIME to set a specific length of time for motion recording. Options are 2, 5, or 10 minutes.
271. From the RECORDER SETUP screen, use VOL+ and VOL to select RECORD TIME; press M to select. The SETUP DETAIL OPTIONS screen displays.2. Use CH+ and CH to select either 2, 5, or 10 minutes as the recording time. Press M to confirm selection.3. Press ESC to return to the previous screen.EVENT LISTThis selection lets you play back recorded files. The EVENT LIST screens let you browse through levels of folders for find a specific recorded file for a specific date and hour on a particular day.This is the default screen when you access the main menu from any other screen.
28From this selection on the main menu - This screen should display: Play Back Recorded File1. Use CH+, CH, VOL+, and VOL to select the dAte and HouR folders containing recorded file(s). Press M to confirm and enter each file.2. Use CH+, CH, VOL+, and VOL to select the recorded file. Each of the recorded file blocks contains detailed information about the recording. Start / Stop Recording TimeCamera recordedRecord File Type- S: Schedule- M: Motion- C: ManualIn this example, Camera 1 was in Schedule mode.Date screen Recorded block screenRecorded file details3. Press M to begin playback.• By default, video plays back in QUAD mode. The icon represents quad mode.
29• To play back a single camera on the screen, press M once after playback begins to pause playback. Use CH+ and CH to select the channel for full screen playblack. A boxed number icon indicates which camera is in full screen playback mode.Delete Recorded FilesYou can delete files from Date or Hour folders as well as individual recorded files.1. Select a folder or individual recorded file. Press REC/DEL.2. DEL : DELETE displays. Press M to confirm the deletion.Schedule and Motion Sensor recordings will function while the system is in playback mode.SYSTEM SETUPFrom this selection on the main menu - This screen should display: SYSTEM SETUP has five subscreens: •Date and Time •TV Output •Power Saving •Multi Channels Idle DIsplay •Default
30Date and Time1. From the SYSTEM SETUP screen, use CH+ and CH to select yeAR, montH, dAte, HouR, and minute.2. Use VOL+ and VOL to scroll through the options for that selection, then CH+ and CH to make another selection. Press M to save the settings when you are finished.TV Output1. From the SYSTEM SETUP screen, use VOL+ and VOL to select tv output; press M. The tv output screen displays. 2. Use CH+ or CH to select ntSc or pAL; press M to confirm. Default = NTSC.NTSC is the TV standard in North America.Power SavingUse this setting to determine how long your system will remain in an idle mode until it moves into power saving mode. Power Saving mode turns off the LCD screen to conserve the monitor's battery

Navigation menu