JTS Professional Co TG-64T Wireless Tour Guide Transmitter User Manual Users manual

JTS Professional Co Ltd Wireless Tour Guide Transmitter Users manual

Users manual

TG-64R(A) / TG-64T(A)TG-64R(A) / TG-64T(A)Power Switch andVolume ControlPower Switch andVolume Control3.5mm EarphoneOutput Jack 3.5mm Microphone Input Jack 3.5mm Line OutTop PanelBottom PanelLeft Side PanelWIRELESS TOUR GUIDE SYSTEMTG-64R/64TTG-64RA/64TAImportant CautionAlways make all connections before plugging the unit into an AC power outlet. Do not leave the devices in a place with high temperature or high humidity.Always do not handle the power cord with wet hands !operation, and recharge if no use for over three months. FeatureTG-64CH2WIRELESS TOUR GUIDE STSTEMTG-64R(A)/TG-64T(A)Charger SlotDC input (12V)Charging IndicatorNeck-StrapAccessoriesWM-10TGMono Earphone ( For TG-64R/RA)TG-64T/TG-64TATG-64CH2Number of charging slotPower requirementLED IndicatorDimensions(mm)2 (receiver or transmitter)12-18 VDC , 600mA Power connected: Flash greenCharging : Green85mm(W)* 75mm(D)* 41mm(H) TG-64R/TG-64RATG-64R(A)TG-64R(A)TG-64R/TG-64TTG-64RA/TG-64TATG-64T(A)TG-64T(A)18.5 cmPLL Synthesized Control502MHz~960MHzChannel Power On/O, Channel selection Volume control,Group selection, Limiter40~18,000Hz1/8” Dummy stereo Phone Jack10 hours typicalRechargeable NIMH AA (1.2V,2000mAh)62mm(W)* 20mm(D)* 97mm(H) Frequency PreparationCarrier Frequency RangeControlsAudio Frequency ResponseOutput connectorBattery lifeBatteryDimension(mm)Internal MicrophoneFrequency PreparationCarrier Frequency RangeRF OutputsStabilityFrequency DeviationControlsSpurious EmissionsAudio Frequency ResponseMicrophone input connectorBattery lifeBatteryDimension(mm)Omni-directional Condenser MicrophonePLL Synthesized Control502MHz~960MHz10mW±10kHz±48kHzPower On/O, Channel selection, Volume control, Group selection, Boost<-50 dBC40~18,000 Hz1/8” Mono Phone Jack10 hours typicalRechargeable NIMH AA (1.2V, 2000mAh)62mm(W)* 20mm(D)* 97mm(H) Optional : CM-201 omnidirectionalLavaliere Microphone(For TG-64T/TA)CM-801S omnidirectionalEarhook Microphone(For TG-64T/TA)PANTONE 425CAdaptor (110/230V input, 600mA 12V output)Installation and OperationWearing and OperatingTG-64T/TG-64TAUse the “Belt-Clip” and the “external Microphone”Use the “Neck-Strap” and the “external Microphone”Installation and OperationWearing and OperatingTG-64R/TG-64RA Use the “Belt-Clip”and the “Mono Earphone”Use the “Neck-Strap” and the “Mono Earphone”Installation and OperationCharge BatteryPlug the TG-64T/TG-64R (Charger Connector faces down) into “Charger Slot” in TG-64CH2.The “Charging testing, and then show green light when charging. It Notice 1 : As soon as AC power is connected, the Notice 2 : for selt-testing during charging to protect batteries from being damaged.59516-004Installation and Operation Power On / OFF and Volume ControlSelect Channel / Group Notice.1: The channel and group of the transmitter (TG-64T) must match that of the receiver (TG-64R). Connect Microphone or EarphoneTG-64T/TG-64TA : Plug “External Microphone” into “3.5mm Microphone Input Jack” TG-64R/TG-64RA : Plug “an earphone” into “3.5mm Earphone Output Jack”Power Switch and Volume ControlTG-10REarhook MicrophoneCM-801S1856說明書 雙面.N字三摺.JTS TG-64R/64T/64RA/64TA (185*250mm)含塑膠袋-01版59516-004TG-64 is designed on the base of the TG-10 successful experience plus JTS very recent innovative ideas.UHF PLL 64 channels in 4 groupsMaximum operational distance ( in line of sight )TG-64R : 180mTG-64RA : 280mUse rechargeable AA batteryBuilt in transmission power selector Built in audio output limiterLine in at TX and Line Out at RX ready for video cameraTransmitter bundled with tie clip microphone CM-201Receiver bundled with single earphone WM-10TGBuilt in speaker at TG-64R/RABuilt in microphone at TG-64T/TACompatible with stationary transmitter TG-10GSTX and receiver TG-10GSRXLINE OUT LINE IN3.5mm Line InBuilt-in SpeakerAntennaChannel SelectorLED Power IndicatorCHBelt ClipCharger Connector12V 600mACHTG-64T/TATG-64R/RAWIRELESS TOUR GUIDE SYSTEMUse the “Neck-Strap” and the “Built-in Microphone”TTG-64TTTTG-64TWireless Tour Guide TransmitterMICCHTTG-64TTurn on or o the power and adjust the volume by rotating the volume control clockwise and reversely. Noted: Please turn o the receiver/transmitter before replacing batteries to ensure all functions normal. Select a desired channel for the receiver / transmitter by rotating the channel selector. (0-9,A-F)Use the supplied plastic stick to select a desired group for the receiver/transmitter. (A-D)CDAB6.3 cm 6.2 cm 6.2 cm 6.3 cm

Navigation menu