GPS NAVIGATION SYSTEM
DNX7140
DNX7000EX
DDX714
DDX7034BT
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX7140/DNX7000EX/DDX714/DDX7034BT Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
Š B64-4361-00/00 (KW/K2W/RW)
Contents
How to read this manual
Before Use
Notes
Functions of the buttons on the front
panel
10
Getting Started
12
How to Display the Navigation Screen
How to Select the Source
How to Set a Medium / a Device
Basic Operation
How to Display the Source Control Screen
How to Display Top Menu Screen
Operation on the Playback Screen of Visual
Sources
How to Display the Easy Control Screen
12
12
13
14
14
15
16
17
Radio Listening
Source Control Screen
Preset Select
Auto Memory
Manual Memory
Radio Text
Set Station Name
Traffic Information
Search by Program Type
TV Watching
Function During TV Screen
Easy Control Screen
Source Control Screen
Auto Memory
Manual Memory
Preset Select
Set Station Name
SIRIUS/XM Control
Source Control Screen
Channel Search
Channel Memory
Direct Channel Search
HD Radio Control
Watching DVD/Video CD
18
Playback Screen
Easy Control Screen
Source Control Screen
DVD-VIDEO Disc Menu
DVD-VR Menu Control
Video CD Zoom Control
18
18
18
20
21
21
Music Disc/ Audio File Listening &
Video File/ Picture File Watching
Source Control Screen
List Select
USB device select
Link search (Audio File in USB)
Playback Screen (Video file, Picture file)
Easy Control Screen (Video file, Picture file)
Picture Control
Movie Menu Control
iPod Control
Playback Screen
Easy Control Screen
Source Control Screen
iPod List
Link search (Music file)
22
22
23
24
25
25
26
26
26
Source Control Screen
Auto Memory
Manual Memory
Receive mode
Channel Search
Direct Search
iTunes Tagging (HD Radio Tagging)
Bluetooth Audio Control
Before Use
Source Control Screen
Other Functions
30
30
31
31
32
32
33
33
34
35
35
35
36
37
37
38
38
Before Use
Downloading the Phonebook
Receiving a Call
During a Call
Call Waiting
Making a Call
Calling by Phonebook
Calling by Entering a Phone Number
Making a Call Using Call Records
Calling by Voice Recognition
Controlling Tone-based Services
Setting Up the Hands-Free Phone
Voice Registration
Key Word Voice Registration
Phone Number Preset
SMS (Short Message Service)
50
50
50
50
50
51
51
52
52
53
53
54
54
55
56
57
57
39
39
40
40
41
42
42
43
43
44
44
45
45
Audio Control
Audio Control Menu
Audio Control
Equalizer Control
Graphic Equalizer Setup
Zone Control
Space Enhancer
Position
59
59
59
60
60
61
61
62
46
46
46
47
How To Use the Character Entry Screen
47
External Device Power Supply Control
47
Muting Audio Volume upon Reception of
Phone Call
48
27
Screen Control
49
27
27
28
28
29
Screen Control
49
DNX7140/DNX7000EX/DDX714/DDX7034BT
Hands Free Unit Control
Remote Controller
87
Battery installation
87
Remote Controller mode switch
87
Common operations (AUD mode)
88
DVD/VCD (DVD mode)
89
Music Disc/Audio file/Video file/ Picture file
(AUD mode)
90
Radio (AUD mode)
91
NAVI (NAVI mode)
91
TV (TV mode)
92
Initial Setup
Status bar Indicator items
DVD Language Codes
Help? Troubleshooting
Help? Error
Specifications
93
94
95
96
98
100
Setup Menu
How to Display SETUP Menu Screen
[Information]
Mileage Tracker (DNX models)
Vehicle Maintenance (DNX models)
Gas Mileage Analysis (DNX models)
Vehicle Setup (DNX models)
Software Information
[System]
User Interface
Language Setting
Touch Panel Adjustment
Clock Setup
Security Setup
Monitor Angle Control
EXT SW Setup
Setup Memory
[Display]
Entering Background
Panel Color Coordinate
Screen Control
[Bluetooth SETUP]
Registering Bluetooth Unit
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
[AV-IN SETUP]
AV Input Setup
[AV Interface]
AV Interface Setup
[Navigation]
Navigation Setup
[Audio SETUP]
DSP Bypass Control
Speaker Setup
Car Type (DTA) Setup
[DVD SETUP]
DVD Setup
DVD Language Setup
DVD Parental Level Setup
Disc Setup
[USB SETUP]
USB Setup
[iPod SETUP]
iPod Setup
[SIRIUS SETUP]
SIRIUS Parental Code Setup
SIRIUS Parental Lock Setup
SIRIUS Parental Lock Channel Select
[TV SETUP]
TV Setup
63
63
64
64
65
65
66
66
66
67
67
68
69
69
70
71
72
73
73
75
75
76
76
77
78
78
79
80
81
81
82
83
83
84
85
85
86
English
How to read this manual
This manual uses illustrations to explain its
operations.
The displays and panels shown in this manual
are examples used to provide clear explanations
of the operations.
For this reason, they may be different from the
actual displays or panels used, or some display
patterns may be different.
Ab t th
About
Ab
the mod
dell groups
If different functions are used in different
model groups, the model groups are
described as shown below.
Names of models included in each model
group are as follows:
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
1 Display the Source Control Screen
DNX models
See .
DNX7140, DNX7000EX
DDX models
2 Operation on the Source Control screen
D 714
DD
DDX
714,, DDX
DDX703
7034BT
703
4BT
Selecting a screen item
Select and choose an item on the screen.
Select the item by touching the button on the
screen.
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[], [D] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
Multi Function
Shortt Pres
Shor
Sh
Presss
P ss th
Pr
Pre
the bu
butt
utto
tton
n, den
n,
denote
oted
t db
byy
Ch
Change
iin the
h screen
With each operation, the screen changes in
t or
th
the
order
der sh
shown
own he
here
re.
[CRSC]
FM Turns the CRSC function On or Off.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display
Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
Function Icon
Icons representing available functions are
shown below.
DVD-VID
DDVD-V
VVD-VID
D-V DEO : Function of DVD-VIDEO playback.
: Function of DVD-VR playback.
: Function of Video CD playback.
: Function of CD (CD-DA) playback.
: Function of Audio File playback.
: Function of MPEG file playback.
: Function of JPEG file playback.
: Function of Disc (DVD, CD) media.
: Function of USB device.
: Function of FM reception.
: Function of SIRIUS source.
: Function of XM source.
Other marks
Oth
Press 2 seconds or more
â : Continues to the next line.
Âś : EEnds
nds he
ere.
e.
Continue to the next page
2 sec.
Continue to touch until the memory number
appears.
Special instructions, supplementary
explanations, limitations, and reference pages
are described.
General precautions and reference pages are
shown on the item.
The above operation example with the mark
differs from the actual operation.
DNX7140/DNX7000EX/DDX714/DDX7034BT
Important precautions are described to
prevent injuries etc.
Next page
The instruction continues to the next page.
Make sure to flip the page for the rest of the
i truction.
ins
in
Press the button, denoted by
2sec. , for 2
seconds or more.
Indicates to press and hold down the button
until operation starts or the screen changes.
The left example indicates to press the button
f 2 seconds.
for
fo
T in
The
initi
itial
al val
value
ue of eac
each
h ssetu
etup
p is sshow
hown
n.
English
Before Use
2WARNING
To prevent injury or fire, take the following
precautions:
⢠To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
⢠Do not watch or fix your eyes on the unitâs display
when you are driving for any extended period.
How to reset your unit
⢠If the unit or the connected unit fails to operate
properly, press the Reset button. The unit returns to
factory settings when the Reset button is pressed.
⢠Remove the USB device before pressing the Reset
button. Pressing the Reset button with the USB
device installed can damage the data contained in
the USB device. For how to remove the USB device,
see (page 13).
⢠When the unit is turned on after pressing the Reset
button, the Initial SETUP screen is displayed. (page
93)
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
¤
⢠Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
disc player of the unit. Called lens fogging, this
condensation on the lens may not allow discs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
DNX7140/DNX7000EX/DDX714/DDX7034BT
Notes
Handling discs
⢠Do not touch the recording surface of the disc.
⢠Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
⢠Do not use disc type accessories.
⢠Clean from the center of the disc and move
outward.
⢠When removing discs from this unit, pull them out
horizontally.
⢠If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with a
ballpoint pen etc.
Disc
types
DVD
Discs that cannot be used
⢠Discs that are not round cannot be used.
CD
⢠Discs with coloring on the recording surface or
discs that are dirty cannot be used.
⢠This unit can only play the CDs with
This unit may not correctly play discs which do not
have the mark.
⢠You cannot play a disc that has not been finalized.
(For the finalization process refer to your writing
software, and your recorder instruction manual.)
⢠If you try to load a 3-inch-disc with its adapter into
the unit, the adapter might separate from the disc
and damage the unit.
Other notes
⢠If you experience problems during installation,
consult your Kenwood dealer.
⢠When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
⢠Characters that conform to ISO 8859-1 can be
displayed.
⢠The RDS or RBDS feature wonât work where the
service is not supported by any broadcasting
station.
This product includes a non-replaceable
lamp that contains trace amounts of
mercury. Please recycle in accordance
with your local state regulations. Do
not dispose of in trash. For disposal or
recycling information, please contact
your local authorities.
recorded in the same disc, only the playback system
recorded at the first setout is played.
List of playable discs
Others
Standard
Support
DVD Video
DVD Audio
DVD-VR
DVD-R
âĄ
Ă
âĄ
âĄ
DVD-RW
âĄ
DVD+R
âĄ
DVD+RW
âĄ
DVD-R DL (Dual layer)
DVD+R DL (Double layer)
DVD-RAM
Music CD
âĄ
âĄ
Ă
âĄ
CD-ROM
âĄ
CD-R
âĄ
CD-RW
âĄ
DTS-CD
Video CD (VCD)
Super video CD
Photo CD
CD-EXTRA
âĄ
âĄ
Ă
Ă
HDCD
CCCD
Dualdisc
Super audio CD
Ă
Ă
Remark
Not compatible with CPRM.
MP3/WMA/AAC/WAV/
JPEG/MPEG Playback
Multi-border/Multisession/
(Playback depends on
authoring conditions)
Compatible with 8-cm (3
inch) discs
Only video format
CD-TEXT/8-cm (3 inch)
discs supported.
MP3/WMA/AAC/WAV/
JPEG playback
Multisession supported
Packet write not supported.
⢠Acceptable media
CD-R/RW/ROM, DVDÂąR/RW, mass-storage-class
USB device, iPod with KCA-iP301V
⢠Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
⢠Playable USB device or SD card file system
⢠Playable USB device file system
FAT16, FAT32
Although the audio files are complied with the standards
listed above, the play maybe impossible depending on
the types or conditions of media or device.
⢠Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from â to âŠ.
< : Folder
Folder
CD ()
v : Audio
Audiofile
fi
v
Only music CD session can
be played.
Sound quality of normal
CD music
Only CD layer can be
played.
⥠: Playback is possible.
% : Playback is partly possible.
Ă : Playback is impossible.
Use of "DualDisc"
When playing a "DualDisc" on this unit, the surface
of the disc that is not played may be scratched
while the disc is inserted or ejected. Since the music
CD surface does not conform to the CD standard,
playback may be impossible.
(A "DualDisc" is a disc with one surface containing
DVD standard signals and the other surface
containing music CD signals.)
v
v
v
v
v.
An online manual about audio files is put on the
site, www.kenwood.com/audiofile/. On this online
manual, detailed information and notes which are
not written in this manual are provided. Make sure
to read through the online manual as well.
About Video files
⢠Acceptable video files
MPEG1, MPEG2
⢠Extensions
mpg, mpeg, m1v, m2v
⢠Acceptable media
CD-R/RW/ROM, DVDÂąR/RW, mass-storage-class
USB device, iPod with KCA-iP301V
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See .
About Audio files
About Picture files
⢠Playable Audio file
AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), Linear
PCM (WAV) (.wav)
⢠Acceptable picture files
JPEG
⢠Extensions
jpg, jpeg
â
⢠If music of normal CD and other playback systems are
Next page 3
English
Notes
⢠Acceptable media
CD-R/RW/ROM, DVDÂąR/RW, mass-storage-class
USB device
Acceptable discs, disc formats, USB device file system,
file and folder names and playing order are the same
as those for audio files. See .
iPod/iPhone that can be connected to this
unit
Made for
⢠iPod nano (1st generation)
⢠iPod nano (3rd generation)
⢠iPod with video
⢠iPod touch (1st generation)
Works with
⢠iPhone
⢠iPod nano (2nd generation)
⢠iPod nano (4th generation)
⢠iPod classic
⢠iPod touch (2nd generation)
⢠You cannot connect a USB device via a USB hub
and Multi Card Reader.
⢠Take backups of the audio files used with this unit.
The files can be erased depending on the operating
conditions of the USB device.
We shall have no compensation for any damage
arising out of erasure of the stored data.
⢠No USB device comes with this unit. You need to
purchase a commercially available USB device.
⢠When connecting the USB device, usage of the
CA-U1EX (option) is recommended.
Normal playback is not guaranteed when a cable
other than the USB compatible cable is used.
Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the
following map.
⢠iPhone 3G
Navigation units that can be connected to
this unit (DDX models only)
⢠Update iPod/iPhone software to the latest version.
⢠You can control an iPod/iPhone from this unit by
connecting an iPod/iPhone (commercial product)
with Dock connector using an optional accessory
iPod connection cable (KCA-iP301V). The word
"iPod" appearing in this manual indicates the iPod/
iPhone connected with the KCA-iP301V (optional
accessory).
⢠By connecting your iPod/iPhone to this unit with
an optional accessory iPod connection cable (KCAiP301V), you can supply power to your iPod/iPhone
as well as charge it while playing music. However,
the power of this unit must be on.
â
⢠If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, "RESUMING" is displayed without
displaying a folder name, etc. Changing the browse
item will display a correct title, etc.
⢠When the iPod is connected to this unit,
"KENWOOD" or "â" is displayed on the iPod to
indicate that you cannot operate the iPod.
⢠KNA-G510*/ G431* ⢠KNA-DV4100
⢠KNA-DV3100
⢠KNA-DV2100
* Update the navigation software to the latest
version. For how to update the software, refer to the
instruction manual of the navigation unit.
About Satellite Radio tuner
This unit supports Satellite Radio tuners which are
released by SIRIUS and XM.
Optional accessories below are necessary for
connection.
SIRIUS tuner : Conversion cable CA-SR20V
XM tuner : XM interface Box KCA-XM100V
Refer to the instruction manual of Satellite radio
tuner.
HD Radio that can be connected to this
unit
⢠KTC-HR300
⢠KTC-HR200
When you connect an HD Radio, Tuner features of
the unit are disabled and changed to HD Radio tuner
features.
TV tuner that can be connected to this unit
⢠KTC-V300N
DVD disc marks
Operation regulatory marks
Symbol
With this DVD, some functions of this unit such as the
play function may be restricted depending on the
location where the DVD is playing. In this case, the
following marks will appear on the screen. For more
information, refer to the disc manual.
Description
ALL
Indicates a region number. The discs with this mark can
be played with any DVD player.
Indicates the number of audio languages recorded. Up
to 8 languages can be recorded in a movie. You can
select a favorite language.
32
Indicates the number of subtitled languages recorded.
Up to 32 languages can be recorded.
If a DVD disc has scenes shot from multiple angles, you
can select a favorite angle.
Indicates the type of screen for the image. The left mark
indicates that a wide image picture (16:9) is displayed
16:9 LB
on a standard TV set screen (4:3) with a black band at
both the top and bottom of the screen (letter box).
Prohibition Mark
Discs with limited period of use
Do not leave discs with a limited period of use in this
unit. If you load an already expired disc, you may not
be able to remove it from this unit.
About USB device
⢠In this manual, the word "USB device" is used for
flash memories and digital audio players which
have USB terminals.
⢠When the USB device is connected to this unit,
it can be charged up provided that this unit is
powered.
⢠Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
Functions of the buttons on the front panel
Functions of the buttons on the front panel
DNX models
Hands Free control On/Off.
1 sec. 7 While watching the navigation screen or playback
screen of a visual source
Displays the Easy Control screen. &
7 While watching the screen other than the above
Screen Switching function On/Off.*4 !
For DDX models
*4 When the Picture in Picture function
(page 11) is activated, this function is
disabled.
DDX models
Hands Free control On/Off.
1 sec. Displays the Easy Control buttons. &
TOP
ATT
VOLUME
AUD
NAV
SRC
TEL
Opens the panel and ejects the disc.
Closes the panel.
F G
Reset button
(page 6)
SI indicator (page 68)
Remote control
sensor
1 sec. : Press for more than 1 second
â
DNX models
Attenuation of the volume On/Off.
1 sec. Keep the tag data of the currently listening music of
HD Radio. t
Volume adjustment.
Displays Graphic Equalizer screen.*1 P
1 sec. Rear view display On/Off.*2
Picture in Picture function
Two screens, the navigation screen and source screen, are displayed. When Picture in Picture
function is on, touching the source screen switches between the R-CAM image and source image.
NAV
DNX models
Displays the navigation screen.
When the navigation screen has already been displayed, it switches
to the currently selected source screen.
1 sec. Picture in Picture function On/Off.*3 !
DDX models
â
*1 The display may not switch to
Audio Control Menu screen in some
conditions.
*2 The function of the [AUD] button
can be changed to the display off
function. See (page
66).
*3 When the Screen Switching function
(page 11) is activated, this function is
disabled.
1 sec.
Screen Switching function
Switching between the navigation screen and the source control screen with one touch operation.
Displays the Top Menu screen. %
10
Turns the power On.
Displays the Source Select screen. @
1 sec. Turns the power Off.
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
11
Getting Started
Getting Started
How to Display the Navigation Screen
How to Select the Source
How to Set a Medium / a Device
DNX models
Sources can be selected from the Source Select
screen.
7 Disc media
Source Select screen
NAV
The navigation screen appears.
Press the [0] button to open/close the front
panel.
If a disc is already inserted, it is ejected by
pressing the [0] button.
DDX models
TOP
SRC
7 iPod
The Source Select screen appears.
Touch the icon of the source.
Use
or
to turn the page.
For how to operate each source, see the
following pages.
The navigation screen appears.
⢠For how to set up and use the navigation function,
see the Navigation Instruction Manual.
â
⢠For DDX models, an optional navigation system needs
to be connected. See (page 8) for connectable
navigation units.
DVD-VIDEO/ DVD-VR/
Video CD disc
\ Page 18
CD
\ Page 22
Audio file/ Video file/
Picture file disc
\ Page 22
iPod
\ Page 27
USB
\ Page 22
TUNER
\ Page 30
SIRIUS/ XM
\ Page 39
HD RADIO
\ Page 42
TV
\ Page 35
Bluetooth
\ Page 46
â
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See (page 28).
7 USB device
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See (page 22).
â
⢠The playback starts automatically after setting the media
or the device.
⢠For Disc media, iPod, and USB, the input is switched to
the source as the media or the device is set.
12
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
13
Basic Operation
Basic Operation
How to Display the Source Control Screen
How to Display Top Menu Screen
On the Source Control screen you can find all the
control buttons for the selected source.
Top Menu Screen is the entrance to all the
functions. You can enter source operation screen
as well as various setup menu from this screen.
Source Control Screen
Top Menu screen
The Source Control Screen appears.
DNX/DDX models
While watching the Easy Control Screen
⢠For how to use each button, see the operation pages
of each source.
TEL
The buttons listed below are common for
many screens.
DNX models
While watching the navigation screen
1 sec.
Touch the [MENU] button on any screen.
The Top Menu Screen appears.
The Source Control Screen appears.
⢠For DDX models
Pressing the [TOP] button on the front panel also
displays the Top Menu Screen.
â
⢠The screen will return to the navigation screen by
touching the same part of the Source Control screen.
Buttons on the Top Menu screen
] Switches to the navigation screen.
[NAV
] Switches to the source control screen
[SRC
of the selected source.
[TEL ] Switches to the Hands Free Main
screen.
[NAV SETUP] Displays Navigation SETUP screen.
(Instruction manual of the Navigation part)
(DNX models only)
[SRC SETUP] Displays SETUP Menu screen. (page
63)
[TEL SETUP] Displays Bluetooth SETUP screen.
(page 73)
[ ] Displays Audio Control Menu screen. (page
59)
] Displays Source Select screen.
] Displays the EXT SW (External Switch)
Control screen. (page 47)
[MENU] Displays Top Menu screen.
[ ] Opens the function bar. The buttons shown
below appear.
[ ] Displays the currently selected source
screen.
[ ] Displays Audio Control Menu screen.
(page 59)
] Displays SETUP Menu screen. (page
63)
] Displays the EXT SW (External
Switch) Control screen. (page 47)
[ ] Closes the function bar.
The Source Control Screen appears.
DDX models
TOP
14
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
15
Basic Operation
Basic Operation
Operation on the Playback Screen of
Visual Sources
While watching visual sources, basic operation is
possible by touching the screen.
How to display the playback screen
How to Display the Easy Control Screen
DNX models
Basic operation buttons of the selected source
can be displayed on the playback screen of
visual sources so that you can control the source
without switching the screen.
The screen has 4 function areas. The function of
each area is different depending on the sources.
(Some areas are unavailable for some sources.)
NAV
Easy Control Screen
Playback screen of a visual source
The Playback screen of a visual source appears.
â
⢠If the display is other than navigation, press the [NAV]
button twice.
DNX/DDX models
Basic operation of each area
1 Reverse search.
2 Displays Menu control screen (DVD-VIDEO,
DVD-VR source), Picture control buttons
(sources with picture files), or Zoom control
buttons (Video CD).
Switches TV band.
3 Forward search.
4 Displays source information screen.*
⢠For the function of each touching area, see the pages
of each source.
SRC
The Source Select screen appears.
Touch the icon of the source.
The Playback screen of a visual source appears.
Buttons on the Easy Control Screen
[â] Changes the function as follows by touching
the [â] button.
[SCRN] Displays Screen Control screen (page
49).
[TEL] Switches to the Hands Free Main
screen (page 51).
[EXT SW] Switches to the EXT SW Control
screen (page 47).
[4], [¢], [7], [£8]
Buttons for source control. The buttons are
different depending on the source. See the
operation pages of each source.
While watching the visual source
* Source information screen
TEL
1 sec.
The Easy control screen appears.
â
â
⢠Easy Control screen is hidden when you touch the central
part of the monitor.
⢠The information display is cleared automatically after
approximately 5 seconds.
16
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
17
Watching DVD/Video CD
You can play DVD/Video CD using various functions.
Video CD
Multi Function
⢠Set the remote controller mode switch to "DVD" mode before starting operation, see
(page 87).
Playback Screen
Easy Control Screen
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1 Display the Playback Screen
1 Display the Easy Control Screen
See (page 16).
2 Operation on the Playback Screen
See
(page 17).
2 Operation on the Easy Control Screen
1, 3 DVD-VIDEO Searches for a chapter.
DVD-VR Searches for a chapter.
Video CD Selects a scene (when PBC is
On) or a track (when PBC is Off ).
2 DVD-VIDEO Displays the Menu Control 1 Screen
(page 20).
DVD-VR Displays the Menu Control Screen
(page 21).
Video CD Displays the Zoom Control Screen
(page 21).
4 Displays Source Information Screen.
â
⢠The information display is cleared automatically after
approximately 5 seconds.
1, 2 Switches to the Playback Screen.
3 Displays the Source Control Screen.
[4], [¢] Searches for a chapter/ scene/
track.
[7] Stops playing.
[38] Plays or pauses.
Source Control Screen
Switches to the source control screen to use
various playback functions.
1 Display the Source Control Screen
] Closes the multi function bar.
DVD-VIDEO
[38] Plays or pauses.
[7] Stops playing.
When touched twice, the disc is played from
its beginning when you play it in the next
time.
[0] Ejects a disc.
[1], [ÂĄ] Fast Forwards or Fast Backwards.
[4], [¢]
DVD-VIDEO Searches for a chapter.
DVD-VR Searches for a chapter.
Video CD Selects a scene (when PBC is On) or a
track (when PBC is Off ).
[ ], [ ] DVD-VIDEO , DVD-VR Slow Forwards or
Backwards.
[ ] Switches to the playback screen.
1 Information display
Volume Label.
"Title" Title Number Display
"Chap" Chapter Number Display
"Scene" Scene/Track Number Display
"3" Play Mode Display
"T"/ "C"/ "R"/ "P" Play Time Display
Use the [TIME] to change play time
display.
[ ] When
is appeared, the text display is
scrolled by touching it.
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Chapter Repeat, Repeat Off
[TIME] Switches the play time display in the
following sequence.
Chapter ("C"), Title ("T"), remaining titles ("R")
DVD-VR
[REP] Switches the Repeat Play operations in
the following sequence.
Title Repeat, Repeat Off
[TIME] Switches the play time display in the
following sequence.
Title ("T"), remaining titles ("R")
[PLST] Switches between the original mode
and Play list mode.
Video CD
[REP] Switches the Repeat Play operations in
the following sequence.
Track Repeat, Repeat Off (Available when the
PBC is off )
[TIME] Switches the play time display in the
following sequence.
Track ("P"), remaining discs ("R") (Effective only
when the PBC function is off )
[PBC] Turns the PBC On or Off. (only when VCD
Ver 2.0 is in use)
See (page 14).
2 Operation on the Source Control Screen
DVD-VIDEO/DVD-VR
18
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
19
Watching DVD/VCD
DVD-VIDEO Disc Menu
[2], [3], [5], [â] Scrolls the screen in the
direction you touch.
[Return] Returns to the previous screen.
[Exit] Exits the Zoom Control screen.
Selects an option from the DVD-VIDEO Disc
Menu.
1 Display the Playback Screen
See (page 16).
2 Display the Menu Control 1 screen
DVD-VR Menu Control
â
⢠To cancel Highlight Control, press the [TEL] button for
more than 1 second.
⢠The Highlight Control is cleared automatically after
approximately 10 seconds.
5 Operation on the Menu Control 2 screen
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off ) each time you
touch.
[2], [3], [5], [â] Scrolls the screen in the
direction you touch.
[Return] Returns to the previous screen.
[Exit] Exits the Zoom Control screen.
Selects an option from the DVD-VR Disc Menu.
1 Display the playback screen
See (page 16).
2 Display the Menu Control screen
Video CD Zoom Control
Displays an enlarged VCD screen.
1 Display the playback screen
See (page 16).
2 Display the Zoom Control buttons
3 Operation on the Menu Control 1 screen
3 Operation on the Menu Control screen
[Menu] Calls the Menu.
[Next] Displays the Menu Control 2 screen.
[2], [3], [5], [â] Selects a menu option.
[Enter] Enters your menu selection.
[Return] Returns to the previous menu screen.
[Top] Displays the Top Menu.
[Highlight] Highlight Control.
[Exit] Exits the Menu Control 1 screen.
[Previous] Displays the Menu Control 1 screen.
[Angle] Switches the picture angle.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Zoom] Displays the Zoom Control screen.
[Exit] Exits the Menu Control 2 screen.
6 Operation on the Zoom Control screen
3 Operation on the Zoom Control screen
[Zoom] Displays the Zoom Control screen.
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
4 Operation on the Highlight Control
4 Operation on the Zoom Control screen
Highlight control lets you control DVD Menu
by touching the menu button directly on the
screen.
[Zoom] Changes the zoom ratio at 2 levels (2
times or off ) each time you touch.
[2], [3], [5], [â] Scrolls the screen in the
direction you touch.
[Exit] Exits the Zoom Control screen.
[Zoom] Changes the zoom ratio at 4 levels (2
times, 3 times, 4 times, or off ) each time you
touch.
20
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
21
Music Disc/ Audio File Listening &
Video File/ Picture File Watching
You can recall various control screens during playback of CD, audio file, video file and picture file.
⢠See (page 7) for playable discs.
⢠See (page 7), (page 7) or (page 7) for playable files.
Source Control Screen
Switches to the source control screen to use
various playback functions.
1 Display the Source Control Screen
See (page 14).
2 Operation on the Source Control screen
CD
Audio File
Au
MPEG
[ ] Switches to the playback screen.
1 Information display
CD Selects the Disc Text or Track Text.
MPEG ,
JPEG
Audio File ,
Selects Folder Name, File Name, Title,
Artist Name, or Album Name.
"Track" Track Number Display
" Folder Number Display
" " File Number Display
"#### / ####" Total number of file in the
folder and the file number display
"3" Play Mode Display
"P"/ "R" Play Time Display
Use the [TIME] to change play time
display.
[ ] When
is appeared, the text display is
scrolled by touching it.
JPEG
[RDM] Starts or stops Random Play (to play
files of the present folder in random order).
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[FOLD]/ [Flist] Displays the folder list.
[Plist] Audio File in
USB
Displays the play list.
[SLIDE] Displays images in the folder currently
being played one after another.
If there is no image in the folder currently
being played, initial background is displayed.
For information on setting the image display
time, see (page 82) or (page 83).
[INFO] Audio File Displays music information
(such as Tag and content property) of Audio
file being played.
MPEG ,
JPEG Displays information of file
being played.
[LINK] Audio File in
USB Searches for another
song of the currently selected artist. See (page 25).
[DEVICE]
USB Selects the connected USB
device (or a partition). (page 24)
â
⢠Touching [List] displays the previously used Folder
list or Play list.
3 Select a song
Folder list
1 Folder opens when touched, and the Audio
file is played.
[ ] When
is appeared, the text display is
scrolled by touching it.
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
TOP] Moves to the top folder.
CUR] Displays the currently playing folder.
[CTRL] Returns to the Source Control screen.
Play list
Multi Function
Disc/USB
Audio File in
Au
USB
List Select
[38] Plays or pauses.
[7]
Disc Stops playing.
[0]
Disc Ejects the disc.
USB Removes the USB device.
When "No Device" is shown, the USB
device can be removed safely.
If you wish to play it again while the
USB device is connected, touch it
again.
[1], [ÂĄ]
CD , Audio File ,
MPEG
Fast Forwards or Fast Backwards.
[4], [¢] Selects a track/ file.
[ ], [ ] Audio File ,
MPEG ,
JPEG
Selects a folder.
[List] Displays the folder list or play list. (page
23)
22
DNX7140/DNX7000EX/DDX714/DDX7034BT
Folder list: Searches folders and Audio/ Video/
Picture files stored in media and devices
according to hierarchy.
Play list: Lists and searches music contained in the
USB device.
1 Display the Source Control Screen
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
CD
2 Start List Select
Disc
[REP] Repeats the present track.
[RDM] Starts or stops Random Play (to play
music in random order).
[TIME] Switches the play time display between
Track ("P"), and Disc Remaining Time ("R").
Audio File
Au
See (page 22).
MPEG
JPEG
USB
1 Switches to the lower level of the category.
[ ] When
is appeared, the text display is
scrolled by touching it.
ALL] Lists all the music in the selected
category.
UP] Moves to the upper level of the
category.
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
[REP] Repeats the present file or data.
[FREP] Repeats the music or data of the
present folder.
Next page 3
English
23
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Scrolls to the position of the specified initial
USB device select
Link search (Audio File in USB)
Playback Screen (Video file, Picture file)
Selects the connected USB device (or a partition).
Searches for another song of the currently
selected artist.
Basic functions are available even when the
playback screen is displayed.
1 Display the Source Control Screen
1 Display the Playback Screen
1 Display the Source Control Screen
See (page 22).
2 Display the USB Mount Device Select
Screen
See (page 22).
2 Start Link search
See (page 16).
2 Operation on the Playback Screen
Scrolls to the selected initial.
3 Select a USB device
3 Select a song
1 Selects a device or partition.
[ UP] Returns to the Device Selection screen.
[ ] When
is appeared, the text display is
scrolled by touching it.
[CTRL] Returns to the Source Control screen.
1 Plays the touched song.
[ ] When
is appeared, the text display is
scrolled by touching it.
TOP] Moves to the top folder.
CUR] Displays the currently playing folder.
[CTRL] Returns to the Source Control screen.
1, 3 Searches for a file.
JPEG Displays the Picture Control Screen
(page 26).
MPEG Displays the Menu Control Screen
(page 26).
4 Displays Source Information Screen.
â
⢠The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
24
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
25
Music Disc/ Audio File Listening & Video File/ Picture File Watching
Easy Control Screen (Video file, Picture
file)
Displays the basic operation buttons on the
screen.
[Exit]
Reverses the picture horizontally.
Rotates counter clockwise.
Rotates clockwise.
Ends Picture Control.
iPod Control
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
1 Display the Easy Control Screen
See
(page 17).
2 Operation on the Easy Control Screen
Movie Menu Control
Playback Screen
Easy Control Screen
Selects an option from the Movie Menu.
Basic functions are available even when the
playback screen is displayed.
Displays the basic operation buttons on the
screen.
1 Display the Playback Screen
1 Display the Easy Control Screen
1 Display the playback screen
See (page 16).
2 Display the Menu Control screen
See (page 16).
2 Operation on the Playback Screen
1, 2 Switches to the Playback Screen.
3 Displays the Source Control Screen.
[4], [¢] Searches for a file.
[7]
Disc Stops playing.
[38] Plays or pauses.
2 Operation on the Easy Control Screen
3 Operation on the Menu Control screen
Picture Control
1, 3 Selects the music/video.
2 Not effective
4 Displays Source Information Screen.
â
Adjusting the video display.
1 Display the Playback Screen
See (page 16).
2 Display the Picture Control Screen
See
(page 17).
[SUB] Switches the subtitle language.
[Audio] Switches the voice language.
[Exit] Exits the Menu Control screen.
1, 2 Switches to the Playback Screen.
3 Displays the Source Control Screen.
[4], [¢] Music/Video Search.
[38] Plays or pauses.
⢠The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
⢠Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
⢠When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
⢠If the played song is not a video content, "No Video
Signal" is displayed on the video screen.
3 Adjust the video display
26
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
27
iPod Control
Source Control Screen
Switches to the source control screen to use
various playback functions.
1 Display the Source Control Screen
See (page 14).
2 Operation on the Source Control Screen
[ARDM] Starts or stops Album Random Play
(plays randomly from current album).*
[INFO] Displays information screen of music/
video being played.
[LINK]
MUSIC Searches for another song of
the currently selected artist. See
(page 29).*
Scrolls to the position of the specified initial
Link search (Music file)
Searches for another song of the currently
selected artist.
1 Display the Source Control Screen
See (page 28).
2 Start Link search
â
* Disabled when VIDEO is being played.
iPod List
Lists and searches music/video contained in the
iPod.
1 Display the Source Control Screen
[38] Plays or pauses.
[1], [ÂĄ] Fast Forwards or Fast Backwards.
[4], [¢] Selects Music/Video.
[List] Displays the iPod list. (page 28)
[ ] Switches to the playback screen.
1 Information display
Selects the Title, Artist Name, Album Name
or iPod Name.
"##### / #####" Total number of music in
the iPod and the music number display
"3" Play Mode Display
"P" Play Time Display
[ ] When
is appeared, the text display is
scrolled by touching it.
Multi Function
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[MUSIC] Displays the list of music category.
[VIDEO] Displays the list of video category.
[REP] Repeats the present file or data.
[RDM] Starts or stops Random play.*
28
DNX7140/DNX7000EX/DDX714/DDX7034BT
Scrolls to the selected initial.
3 Select a song
See (page 28).
2 Display the iPod List
3 Select music/video
1 Categories and music are listed.
Touch a category name to move its lower
level. If music title is displayed, the music is
played by touching it.
When [38] is appeared, all the music in its
category is played by touching the button.
[ ] When
is appeared, the text display is
scrolled by touching it.
UP] Returns to previous category.
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
1 Plays the touched song.
[ ] When
is appeared, the text display is
scrolled by touching it.
TOP] Moves to the top category.
CUR] Displays the currently playing
category.
[CTRL] Returns to the Source Control screen.
Scrolls to the position of the specified initial
Scrolls to the selected initial.
English
29
Radio Listening
Various control screens appear in the Tuner Source mode.
⢠Set the remote controller mode switch to "AUD" mode before starting operation, see
(page 87).
Preset Select
Auto Memory
Lists and selects memorized station.
Stores stations with good reception in memory
automatically.
1 Display the Source Control Screen
See (page 30).
Source Control Screen
Multi Function
2 Display the Tuner Preset List Screen
1 Display the Source Control Screen
See (page 30).
2 Select a band you wish to store in memory
Switches to the source control screen to use
various functions.
1 Display the Source Control Screen
3 Select a station
See (page 14).
2 Operation on the Source Control screen
3 Select the Auto Memory mode
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information function On
or Off.
See , (page 33).
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[List] Display the Tuner Preset List Screen.
(page 31).
1 Information display
Selects the Program Service Name, Title &
Artist name, Category Name 1/2, or Radio
Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[ ] When
is appeared, the text display is
scrolled by touching it.
30
DNX7140/DNX7000EX/DDX714/DDX7034BT
[1/3] Switches the multi function display.
[ ] Closes the multi function bar.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See (page 31).
[PRE] Lists and selects memorized station.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[PTY]
FM Searches station by program
type. See (page
34).
[CRSC]
FM Turns the CRSC function On
or Off.
[P1] â [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
(page 31) or (page 32).
[NAME] Sets a name to the station. See (page 33).
[TEXT]
FM Displays Radio Text screen. See
(page 32).
1 Memorized stations are displayed. Touch to
tune in.
[DISP] Switches the list display name to Station
name or Program Service Name.
[CTRL] Returns to the Source Control screen.
4 Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
â
⢠The operation ends automatically if you do not operate
within 10 seconds.
English
31
Radio Listening
Manual Memory
Radio Text
Set Station Name
Traffic Information
Stores the current receiving station in memory.
You can display the radio text. (Only when
receiving the FM broadcast)
Assigns a name to a station.
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
1 Display the Source Control Screen
See (page 30).
2 Select a station you wish to store in
memory
1 Select a station
See (page 30).
1 Tune in to the station to name
See (page 30).
1 Display the Source Control Screen
2 Start Name set
2 Display the radio text
See (page 30).
2 Set the Traffic information mode
3 Enter the name
See (page 47) for information
on how to enter a name.
3 Store in memory
4 End Name set
When the traffic bulletin starts...
The Traffic Information screen appears
automatically.
Traffic Information screen
2 sec.
Continue to touch until the memory number
appears.
1 Selects the Program Service Name, Title &
Artist name, Station Name, Radio Text Plus, or
Radio Text for text display.
[ ] When
is appeared, the text display is
scrolled by touching it.
[5], [â] Scrolls the text display.
â
⢠It is necessary to have Traffic Information function set to
On in order to have the Traffic Information screen appear
automatically.
⢠During reception of traffic information the adjusted
volume is automatically remembered, and the next time
it switches to traffic information it's automatically the
remembered volume.
32
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
33
TV Watching
Radio Listening
Search by Program Type
Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1 Display the Source Control Screen
See (page 30).
2 Enter Program Type Search mode
Function During TV Screen
Easy Control Screen
Basic functions are available even when the TV
screen is displayed.
Displays the basic operation buttons on the
screen.
1 Display the TV screen
1 Display the Easy Control Screen
See (page 16).
See
(page 17).
2 Operation on the Easy Control Screen
2 Operation on the TV screen
3 Select a Program Type
1 Program Type is displayed. Touch to select a
Program Type.
[Search] Searches for the program type.
It is displayed when the Program type is
selected.
[User] Continue to touch more than 2 seconds.
The currently receiving station is registered to
the selected program type.
1, 3 Selects a channel.
2 Switches to TV1 or TV2.
4 Displays Source Information Screen.
â
⢠The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
1, 2 Switches to the TV screen.
3 Displays the Source Control Screen.
[BAND] Switches to TV1 or TV2.
[4], [¢] Selects a channel.
Use the [SEEK] to change the channel tuning
sequence.
[SEEK] Switches the Seek mode. (page 36)
4 Search a station of the selected Program
Type
34
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
35
TV Watching
Source Control Screen
Auto Memory
Manual Memory
Switches to source control screen to use various
functions.
Stores stations with good reception in memory
automatically.
Stores the current receiving channel in memory.
1 Display the Source Control Screen
1 Display the Source Control Screen
Multi Function
See (page 36).
See (page 14).
1 Display the Source Control Screen
See (page 36).
2 Select a band you wish to store in memory
2 Select a station you wish to store in
memory
3 Select the Auto Memory mode
3 Store in memory
2 Operation on the Source Control Screen
[BAND] Switches to TV1 or TV2.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel tuning
sequence.
[List] Display the TV Preset List Screen. (page
38).
[ ] Switches to the TV screen.
1 Information display
Channel information display
"TV" Band display
"Preset" Memory Number Display
"ch" Channel display
[ ] When
is appeared, the text display is
scrolled by touching it.
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[AME] Selects the Auto Memory mode.
See (page 37).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[PRE] Lists and selects memorized station.
[NAME] Sets a name to the station. See (page 38).
[P1] â [P6] When [P1] to [P6] buttons appear,
you can recall channels on memory.
For memory of broadcasting stations, see
(page 37) or (page 37).
4 Start Auto Memory
2 sec.
Continue to touch until the memory number
appears.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
â
⢠The operation ends automatically if you do not operate
within 10 seconds.
36
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
37
SIRIUS/XM Control (North American sales area only)
TV Watching
Preset Select
Set Station Name
Lists and selects memorized station.
Assigns a name to a station.
1 Display the Source Control Screen
1 Tune in to the station to name
See (page 36).
2 Start Preset Select
See (page 36).
2 Start Name set
Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite
radio connected only. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is
necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
⢠This document uses the SIRIUS display as an example.
Source Control Screen
Multi Function
Switches to control screen to use various
functions.
1 Display the Source Control Screen
3 Select a station
See (page 14).
3 Enter the name
See (page 47) for information
on how to enter a name.
2 Operation on the Source Control screen
4 End Name set
1 Memorized stations are displayed. Touch to
tune in.
[ ] Switches to the TV screen.
[CTRL] Returns to the Source Control screen.
38
DNX7140/DNX7000EX/DDX714/DDX7034BT
[BAND] Switches the band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[List] Display the Category List Screen. (page
40).
1 Information display
Displays information concerning music
being played.
SIRIUS Changes the display from
Channel Name, Song Title Name, Artist
Name, Composer Name, to Category
Name.
XM Changes the display from
Channel Name, Artist Name, Song Title
Name, to Category Name.
Displays the ID number when Channel 0 is
selected.
SIRIUS Displays the SIRIUS ID.
XM Displays the RADIO ID.
"SR"/ "XM" Band display
"Preset" Preset number
"CH" Channel display
[ ] When
is appeared, the text display is
scrolled by touching it.
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"SEEK1" Tunes channels one after the other.
"SEEK2" Selects channels in memory one after the other.
[DIR] You can tune in by entering the desired
channel number. See
(page 41).
[CAT] You can tune in by specifying the desired
category. See (page 40).
[SCN]
XM Starts or stops Channel Scan
(that tunes channels one after the other).
[INFO] Displays the program information
screen.
[P1] â [P6] When [P1] to [P6] buttons appear,
you can recall the channel on memory. For
memory of channel stations, see (page 40).
English
39
SIRIUS/XM Control (North American sales area only)
Channel Search
Channel Memory
Direct Channel Search
Specifying the desired category and selecting a
channel.
Stores the current receiving channel in memory.
Tuning in by entering the desired channel
number.
1 Display the Source Control Screen
See (page 39).
2 Display the Category List Screen
1 Display the Source Control Screen
See (page 39).
2 Select a channel you wish to store in
memory
1 Display the Source Control Screen
See (page 39).
2 Start Direct Channel Search
3 Select a category
3 Enter the channel number
3 Store in memory
1 Selects a category.
Displays all the channels in the selected
category.
[ ] When
is appeared, the text display is
scrolled by touching it.
[All Channel] Displays all the channels.
[CTRL] Returns to the Source Control screen.
4 Select a channel
2 sec.
Continue to touch until the memory number
appears.
1 Enters the channel number.
[Cancel] Cancels the direct channel search.
[Clear] Clears the channel number.
4 Tune in the channel
1 Selects a channel.
Tunes in the selected channel.
[Info Change]
SIRIUS Switches the sequence
of the list.
Changes the display from Channel Name,
Category Name, Song Title, Artist Name, to
Composer Name.
UP] Display the category list.
40
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
41
HD Radio Control (North American sales area only)
Various control screens appear in the HD Radio Source mode. (with the optional accessory HD Radio tuner
connected only)
Auto Memory
Manual Memory
Stores stations with good reception in memory
automatically.
Stores the current receiving station in memory.
1 Display the Source Control Screen
See (page 42).
Source Control Screen
Multi Function
1 Display the Source Control Screen
See (page 42).
2 Select a band you wish to store in memory
2 Select a station you wish to store in
memory
3 Select the Auto Memory mode
3 Store in memory
Switches to the source control screen to use
various functions.
1 Display the Source Control Screen
See (page 14).
2 Operation on the Source Control screen
[HD FM] Switches to the HD FM1/2/3 band.
[HD AM] Switches to the HD AM band.
[4], [¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
[CH â], [CH 5] Selects a channel (program).
[Tag] Registers the tag of the song you are
listening to now.* (page 45)
[List] Display the Channel List Screen. (page
44).
1 Information display
Selects the Call Letter (8), Title (32), Artist
(32), Album (32), Genre (8), or Station Name
(32).
The number in the ( ) indicates the
maximum number of displayed characters.
"FM"/ "AM" Band display
"Preset" Preset number
"Main"/ "Sub" Indicates whether the Main
or Sub channel is selected now.
"MHz"/ "kHz" Frequency display
"Tag" When song information can be
registered.* (page 45)
[ ] When
is appeared, the text display is
scrolled by touching it.
42
DNX7140/DNX7000EX/DDX714/DDX7034BT
[1/2] Switches the multi function display.
[ ] Closes the multi function bar.
[AME] Selects the Auto Memory mode.
See (page 43).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
[4Line]/ [2Line] Switches the number of lines
displayed in the Information Display.
[DIR] You can tune in by entering the desired
frequency or channel number. See (page 45).*
[RCV] The Receive mode switches in the
following order. (page 44)
[TTL] Displays the tuned in program
information.
[P1] â [P6] When [P1] to [P6] buttons appear,
you can recall the stations on memory.
For memory of broadcasting stations, see
(page 43) or (page 43).
4 Start Auto Memory
2 sec.
Continue to touch until the memory number
appears.
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
â
⢠The operation ends automatically if you do not operate
within 10 seconds.
â
⢠* KTC-HR300 (optional accessory) connected only.
English
43
HD Radio Control (North American sales area only)
Receive mode
Channel Search
Direct Search
iTunes Tagging (HD Radio Tagging)
Sets the radio broadcasts receive mode.
Displays the list of channels within the station you
tune in currently.
Tuning in by entering the desired frequency or
channel number.
KTC-HR300 (optional accessory) connected only.
KTC-HR300 (optional accessory) connected only.
1 Display the Source Control Screen
1 Display the Source Control Screen
Using an iTunes Tagging enabled HD Radio you
can tag your music. When you hear a song you
enjoy on your local HD Radio station, you only
have to press the [ATT] button for at least 1
second. The songâs information will then be saved
on this unit. The saved songs will then show up
in a playlist called âPurchasedâ in iTunes the very
next time you sync your iPod to your computer.
So then you just need to click and then easily buy
and download the song you were tagging directly
from the Apple iTunes Music Store.
1 Display the Source Control Screen
See (page 42).
2 Display the Receive mode screen
See (page 42).
2 Display the Channel List Screen
See (page 42).
2 Start Direct Search
KTC-HR300 (optional accessory) connected only.
3 Select a channel
Registers a tag
3 Select the receive mode
3 Enter the frequency or channel number
ATT
[Receive Mode] The Receive mode switches in
the following order.
"Auto": Automatically tunes to analog
broadcast when there is no digital
broadcast.
"Digital": Digital broadcasts only.
"Analog": Analog broadcasts only.
1 Selects a channel.
Tunes in the selected channel.
[Info Change] Displays the category subject to
list display.
[CTRL] Returns to the Source Control screen.
1 sec.
The memory usage can be checked
1 Display the Source Control Screen
See (page 42).
1 Enters the frequency or channel number.
[Mode] Switches the search mode to
Frequency or Channel.
[Cancel] Cancels the direct search.
[Clear] Clears the frequency or channel
number.
2 Display the Information Screen
4 Tune in the frequency or channel
3 The memory usage can be checked
Select the "Tagging Information" display.
â
⢠Up to 50 TAGs (songâs information) can be registered to
this unit. When iPod is connected, the TAG information
registered to this unit is transferred to the connected
iPod.
44
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
45
Bluetooth Audio Control
Other Functions
You can listen to audio files stored in Bluetooth audio player and cell-phone.
Before Use
How To Use the Character Entry Screen
External Device Power Supply Control
⢠You need to register your audio player and cell-phone
before using it with this unit. For more details, see
(page 73).
⢠If you have registered two or more audio players or cellphones, you need to select one of them. For more details,
see (page 75).
Character Entry screen
Controlling the external device power supply.
1 Display the Source Select Screen
See (page 12).
2 Display the EXT SW Control screen
Source Control Screen
Switches to control screen to use various
functions.
1 Display the Source Control Screen
See (page 14).
2 Operation on the Source Control screen
1 Enters characters.
[2], [3] Shifts the cursor.
[5], [â] Scrolls up or down the character
button display.
[qwe]/ [abc] Sets the key layout of the
character buttons.
abc : Alphabetical key layout.
qwe : Qwerty key layout.
[Clear] Clears the character.
[Space] Enters a space.
If you erase a character, locate the cursor on it
and touch this button.
3 Control the external device power supply
â
[3] Plays.
[7] Stops playing.
[8] Pauses.
[4], [¢] Selects a file.
â
⢠If the Bluetooth Audio player does not support AVRCP
profile, buttons are not displayed. Operate from the
Audio player.
46
DNX7140/DNX7000EX/DDX714/DDX7034BT
⢠You can enter characters only after you have applied the
parking brake.
You can turn on or off the external device power
supply.
â
⢠You must connect a commercially available relay unit in
order to use this function.
Connect the external device to be controlled to that
relay unit.
⢠Refer to (page 69) for information on
setting the power on or off specification.
English
47
Other Functions
Muting Audio Volume upon Reception of
Phone Call
Screen Control
Setting the monitor screen.
When the telephone is called...
The Phone Call ("CALL") screen appears, and
system is paused.
Screen Control
Phone Call ("CALL") screen
1 Display the Easy Control Screen
See
(page 17).
2 Display the Screen Control screen
On or Off according to the
Navigation Day/Night display
setting. (DNX models only)
[Mode] Selects a screen mode.
You can select any of the following screen
mode.
"Full", "Just", "Zoom", "Normal"
â
⢠The Screen Control screen is displayed only when you
have applied the parking brake.
⢠The picture quality can be set for each source.
⢠You can set image quality of screens such as menu from
(page 73).
When the call ends...
Hang up the phone.
The system resumes playing automatically.
â
⢠To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to .
Full picture mode ("Full")
3 Adjust the picture quality
Justify picture mode ("Just")
[Bright] Brightness Control
[Tint] Tint Control
Displayed for an NTSC system image on Video,
iPod or Rear View Camera.
[Color] Color Control
Displayed on Video, iPod, TV or Rear View
Camera screen only.
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Sharpness] Sharpness control
Displayed on Video, iPod, USB or Rear View
Camera screen only.
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesnât dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
48
DNX7140/DNX7000EX/DDX714/DDX7034BT
Zoom picture mode ("Zoom")
Normal picture mode ("Normal")
English
49
Hands Free Unit Control
Various functions can be used in the Hands Free control mode.
Before Use
⢠You need to register your cell-phone before using it with
this unit. For more details, see (page 73).
⢠If you have registered two or more cell-phones, you need
to select one of them. For more details, see (page 75).
⢠To use the Phone Book, it must be downloaded to this
unit in advance. For details, see (page 50).
Call Waiting
⢠To cancel downloading of the phonebook data, operate
the cell-phone.
Receiving a Call
Downloading the Phonebook
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
1 By operating the cell-phone, send the
phonebook data to this unit
] ⢠Answering another incoming call with
the current call suspended
⢠Switching between the current call and
waiting call
Each touch of this button switches the
calling party.
] ⢠Answering another incoming call after
terminating the current call
⢠Answering the waiting call after
terminating the current call
] Answering a Phone Call
] Rejecting an Incoming Call
Making a Call
During a Call
Displaying the control screen and using various
functions.
1 Display the Hands-Free Control screen
2 By operating the cell-phone, start the
hands-free connection
â
⢠For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
⢠For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
⢠Up to 1000 phone numbers can be registered for each
registered cell-phone.
⢠Up to 32 digits can be registered for each phone number
along with up to 50* characters representing a name.
(* 50: Number of alphabetic alphabetical characters.
Fewer characters can be input depending on the type of
characters.)
⢠Depending on the type of your cell-phone, the following
restrictions are placed:
- The phonebook data cannot be downloaded normally.
- Characters in the Phonebook are garbled.
- The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
50
DNX7140/DNX7000EX/DDX714/DDX7034BT
TEL
] Switches the voice output between
phone and speaker.
[DTMF] Outputs dial tone. See (page 54).
] Disconnecting a call
2 Select a dialing method
[Preset1-3] Calls the preset phone number.
For information on how to preset a phone
number, see (page
57).
Phonebook] Displays the Search
for Phonebook screen. See (page 52).
Outgoing Calls] Displays the Outgoing
Calls screen. See (page 53).
Incoming Calls] Displays the Incoming
Calls screen. See (page 53).
Missed Calls] Displays the Missed
Calls screen. See (page 53).
[Direct Number] Displays the Dialing Display
screen. See (page 52).
[Voice] Starts voice recognition.
See (page 53).
[BT SETUP] Displays the Bluetooth SETUP
screen. (page 73)
[SETUP] Displays the Hands Free Setup screen.
(page 54)
â
⢠While your car is moving, some functions are disabled for
safetyâs sake. The buttons associated with the disabled
functions become ineffective if pressed.
⢠When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
⢠* Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
the cell-phone. No status is displayed if information
about it cannot be obtained.
⢠Setting the cell-phone in the private mode can disable
the hands-free function.
Adjusting the Voice Volume during a Call
1 Calls the displayed phone number. If you
have registered a phone number in the
Phonebook, the destination person name is
displayed.
] Calls the displayed phone number.
[Redial] Displays the previously called phone
number.
English
51
Hands Free Unit Control
Calling by Phonebook
Calling by Entering a Phone Number
Making a Call Using Call Records
You can call a person using his/her phone
number that you have registered in the
Phonebook.
Makes a call by entering a phone number.
Calls by selecting a phone number from the
outgoing, incoming, or missed calls list.
1 Display the Hands-Free Control screen
See (page 51).
1 Display the Hands-Free Control screen
See (page 51).
2 Display the number input screen
1 Display the Hands-Free Control screen
See (page 51).
2 Display the Voice Recognition screen
3 Utter the voice registered in the
Phonebook
2 Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
2 Display the Phonebook screen
3 Enter a phone number
3 Select the name to call
3 Select from calls list
Example : Outgoing Calls screen
When a beep is heard, utter the category within
2 seconds.
1 Calls the entered phone number.
[Clear] Clears the number.
1 Phonebook data list.
2 Displays the Phonebook beginning with the
name whose first character you have touched.
[ ] When
is appeared, the text display is
scrolled by touching it.
4 Select the phone number to call
When a beep is heard, utter the name within 2
seconds.
If there are more than one phone numbers
registered under the same name, go to step 4.
4 Make a call
4 Select a Phone number category
Calls the selected phone number.
You can start talking when the destination
responds.
4 Make a call
â
⢠You can input up to 32 digits.
â
⢠The Outgoing Calls list screen, Incoming Calls list,
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
5 Make a call
Calling by Voice Recognition
Calls by recognizing the registered voice.
â
⢠To use the Phonebook, it must have been downloaded
from the cell-phone. For more details, see the instruction
manual of your Bluetooth Unit and your cell-phone.
⢠Initials including no corresponding name will not be
displayed.
⢠During search, a non-accent character such as "u" is
searched for instead of an accent character such as "Ăź".
52
DNX7140/DNX7000EX/DDX714/DDX7034BT
Selects the Phone number category.
5 Make a call
â
⢠In order to perform voice recognition, voice must
be registered in the Phonebook data. See (page 55). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See (page 56).
â
⢠A message is displayed if the voice is not recognized.
Read the message for the further operation.
1 Display the Hands-Free Control screen
See (page 51).
English
53
Hands Free Unit Control
Controlling Tone-based Services
Setting Up the Hands-Free Phone
Uses tone base service using DTMF (Dual Tone
Multi Frequency).
The Hands-Free system can be set as follows.
1 Display the Talking screen
See
(page 52).
1 Display the Hands-Free Control screen
See (page 51).
2 Display the Hands Free Setup screen
2 Display the DTMF input screen
3 Set the each item
3 You can send tones during a call
[Auto Response] Sets an automatic response
time after call termination. ( "OFF")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
[Phone Voice] Sets a ringing tone output
position. ( "Front All")
"Front L": Outputs the tone from the front lefthand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
[Call Beep] Sets the beep of the incoming call.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[SMS Receive Beep] Sets the beep of the
incoming SMS. ( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[Phone Information Use] Sets whether to
use cell-phone phonebook, outgoing calls list,
incoming calls list and missed calls list.
( "ON")
"ON": Yes.
"OFF": No.
[SMS Use] Sets the SMS function. ( "ON")
"ON": Use SMS function.
"OFF": SMS not available.
[Key Word] Registers the voice to select phone
number category with voice recognition.
See (page 56).
[Use Phone Voice Recognition] Sets whether
to dial using the phone voice recognition
function. ( "ON")
[Echo Cancel] Sets whether to cancel echo.
( "ON")
[Microphone Level] Adjusts the sensitivity of
the built-in microphone for a telephone call.
( "6")
[Noise Reduction] Reduces the noises
generated by the surrounding environment
without changing the microphone volume.
( "ON")
[Restore] Restores the [Echo Cancel],
[Microphone Level], or [Noise Reduction] value
to the initial value.
â
Voice Registration
Registers voice for voice recognition in
Phonebook. Up to 35 voices can be recorded in
one cell-phone.
1 Display the Phonebook Detail screen
Go through the procedure of (page 52).
2 Select the name to register
1 Selects a name.
[Record] Registers the voice for voice
recognition to the selected Phonebook. If
there are already 35 voice tag registered
in the same cell-phone, [Record] button is
deactivated.
[Play] Plays the voice registered in the selected
Phonebook data.
[Delete] Deletes the voice registered in the
selected Phonebook data.
Touch to display the confirmation screen.
Touch [Yes] to delete or [No] to cancel.
3 Display the voice registration screen
4 Utter the voice to register (1st try)
⢠Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
⢠Select the speaker which is further from the microphone
in order to prevent howling or echoes.
Utter within 2 seconds after the Beep.
Next page 3
54
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
55
Hands Free Unit Control
5 Utter the voice to register (2nd try)
Utter within 2 seconds after the Beep.
6 End voice registration
[Record] Registers voice for the selected
Phone number category.
[Play] Plays voice registered for the selected
Phone number category.
[Delete] Deletes voice registered for the
selected Phone number category. Touch to
display the confirmation screen. Touch [Yes] to
delete or [No] to cancel.
Phone Number Preset
5 Register phone number
Registers frequently used phone number to
Hands Free control screen preset button.
1 Display the Hands-Free Control screen
See (page 51).
2 Select the Preset number to register
4 Display voice registration screen
SMS (Short Message Service)
â
Uses SMS function.
⢠A message is displayed if the voice is not recognized.
Read the message for the further operation.
⢠Repeat from 1st try if the voice is different from the 1st
try.
5 Utter the voice to register (1st try)
1 sec.
â
2 Display the SMS Select screen
3 Select the search destination of the number
to register
Registers the voice to select the Phone number
category by Voice Recognition.
See (page
54).
See (page 51).
⢠If no Preset number is registered, pressing this button
momentarily moves to the step 3.
Key Word Voice Registration
1 Display the Hands Free Setup screen
1 Display the Hands-Free Control screen
Utter within 2 seconds after the Beep.
6 Utter the voice to register (2nd try)
Utter within 2 seconds after the Beep.
3 Select a function
2 Display the Key Word List screen
3 Select the Phone number category to
register
1 Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
7 End voice registration
â
⢠A message is displayed if the voice is not recognized.
Read the message for the further operation.
⢠Repeat from 1st try if the voice is different from the 1st
try.
] Registers from Phonebook.
] Registers from outgoing calls list.
] Registers from incoming calls list.
] Registers from missed calls list.
[Direct Number] Registers by entering phone
numbers.
[Voice] Registers voice for voice recognition to
preset number.
[Memory] Registers the currently displayed
phone number.
[Delete] Deletes the currently displayed phone
number. Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to cancel.
] Displays the SMS create menu screen.
] Displays received message list.
] Displays sent message list.
] Displays the Message screen. The button
will be active when any message has been
created after power-on.
[Download] Retrieves SMS messages from the
cell-phone.
4 Search phone number to register with each
function
Next page 3
56
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
57
Audio Control
Hands Free Unit Control
4 Select a message to display
3 Create a message
1 Calls the number in the selected message.
[DISP] Displays the selected message.
SMS Message screen
Creates a new message for the selected
message.
Create a message
1 Enters characters.
[2], [3] Moves the cursor.
[5], [â] Scrolls up or down the character
button display.
[qwe]/ [abc] Sets the key layout of the
character buttons.
abc : Alphabetical key layout.
qwe : Qwerty key layout.
[Clear] Erases the entered character.
If touched more than 1 second, all the input
characters are erased.
[Space] Enters a space.
[SET] Determines the message and returns to
the SMS Create Menu screen.
Audio Control Menu
Audio Control
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
1 Display the Source Select Screen
1 Display the Audio Control screen
Touch [
SRC
2 Display the Create SMS Message screen
58
DNX7140/DNX7000EX/DDX714/DDX7034BT
2 Set the each item
2 Display the Audio Control menu
4 Send the message.
In this manual, the above selection is indicated
as:
].
Touch [ ] > [
] Select a destination from the
phonebook.
[Direct Number] Enter the phone number.
[SET] Display the Create SMS Message screen.
[Send] Sends the message.
[Delete] Deletes the Draft message.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
] > [Audio Control]. (page 59)
1 Input the destination
]>[
3 Select the Audio Control item
Item
[Audio Control]
[Equalizer]
[EQ]
[Zone Control]
[Space Enhancer]
[Position]
Page
59
60
60
61
61
62
1 Adjusts the front/back and left/right volume
around the touched area.
[2], [3] Adjusts the right and left volume
balance.
[5], [â] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
â
⢠If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Bass Boost] Sets the amount of bass boost.
"OFF"/ "Step1"/ "Step2"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
English
59
Audio Control
Equalizer Control
Graphic Equalizer Setup
Zone Control
Space Enhancer
You can set up the equalizer.
You can Manually set the equalizer curve.
You can set the front and rear audio source.
You can enhance the soundscape.
1 Display the Equalizer screen
1 Display the Equalizer screen
1 Display the Zone Control screen
1 Display the Space Enhancer screen
Touch [
]>[
] > [Equalizer]. (page 59)
2 Set the each item
Touch [
]>[
] > [Equalizer]. (page 59)
2 Display the Graphic Equalizer screen
Touch [
]>[
] > [Zone Control]. (page 59)
2 Set the Zone Control
Touch [
59)
]>[
] > [Space Enhancer]. (page
2 Set the Space Enhancer
3 Set the Graphic Equalizer
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"/ "iPod"/ "User"
â
⢠"User" can be selected after graphic equalizer
adjustment is carried out. See (page 60).
⢠"iPod" uses the its equalizer function. Only iPod
sources can be selected.
[EQ] Displays the Graphic Equalizer setup
screen. (page 60)
1 Sets the soundscape level.
â
⢠You cannot set Space Enhancer in tuner source.
1 Gain level can be adjusted by touching the
each frequency bar.
[2], [3] Sets a frequency.
[5], [â] Sets a gain level.
[EQ Init] Returns to the previous level which
the gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
If turned "ON", it extends the 62.5 Hz to the
low register by approximately 20%.
[SW LEVEL] Adjusts the subwoofer volume.
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
â
⢠When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
â
⢠There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- (page 60), (page
61), (page 62), (page
78), (page 78), and (page 79) are not available.
60
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
61
Setup Menu
Audio Control
Position
You can adjust the sound effects according to
your listening position.
Position DTA Control
You can fine-adjust your listening position.
You can set up various receiver parameters.
1 Display the Position DTA screen
1 Display the Position screen
Touch [
]>[
] > [Position]. (page 59)
2 Set the Position Control
How to Display SETUP Menu Screen
2 Select a speaker you wish to adjust
Displays the Setup menu to set various functions.
1 Display the Source Select Screen
SRC
[P1] - [P3] Stores the present adjustment setup
in memory, or calls it from memory.
To store your adjustment in memory:
Continue to touch [P1] to [P3] more than 2
seconds.
To call your adjustment from memory:
Touch [P1] to [P3] of your adjustment you
wish to call from memory.
[2], [3] Sets a listening position.
You can select any of "Front R" (Right front),
"Front L" (Left front), "Front All" (All front), and
"All" (All) positions.
[DTA] Displays the Position DTA (Digital Time
Alignment) screen.
3 Exit Position Control
1 Left front speaker
2 Display the Setup Menu Screen
2 Right front speaker
3 Left rear speaker
4 Right rear speaker
5 Subwoofer
[2], [3] Finely adjusts the value set with the
Position function.
[Total DTA] Indicates setup distance. The
adjusted distance (Position and Position Fine
Control values), and the total of the distance
adjusted by Car Type Set Up (page 79) and
the adjustment distance for position setup are
indicated.
3 Finely adjust the distance
In this manual, the above selection is indicated
as:
].
Touch [ ] > [
3 Select the setup item
â
⢠The final distance is adjusted to the total of Car Type Set
Up value (page 79) and Position Setup (both Position and
Position Fine Control) value.
⢠If you change the Car Type Set Up value (page 79), the
position is set to "All".
⢠Only the adjusted distance of position setup (Position
and Position Fine Control values) is stored in memory.
Therefore, the final adjustment distance changes if you
change the Car Type Set Up value (page 79).
Finely adjust the value set with the Position
function.
Item
[Information]
[Vehicle]
[Mileage Tracker]
[Vehicle Maintenance]
[Gas Mileage Analysis]
[Vehicle SETUP]
[Software]
[System]
[User Interface]
[Touch]
[Clock]
[Security]
[Angle]
[EXT SW]
[SETUP Memory]
[Display]
[Background]
[Color]
[Screen Control]
[Bluetooth SETUP]
[SIRIUS SETUP]
[DVD SETUP]
[iPod SETUP]
[USB SETUP]
[TV SETUP]
[AV-IN SETUP]
[Navigation]
[Audio SETUP]
[Speaker Select]
[Car Type]
[AV Interface]
Page
64
64
65
65
66
66
67
67
68
69
69
70
71
72
73
75
84
80
83
83
86
76
77
78
78
79
76
[5], [â] Scrolls the setup menu.
â
⢠[AV-IN SETUP], [Navigation] and [Audio SETUP] options
can be locked. The key mark ( ) is displayed in reverse
video for the locked option. See (page
70).
62
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
63
Setup Menu
Mileage Tracker (DNX models)
Measures the travel distance.
1 Display the Mileage Tracker screen
[Input] Sets a distance.
3 Set a distance
Touch [
]>[
] > [Information] >
[Vehicle] > [Mileage Tracker]. (page 63)
Gas Mileage Analysis (DNX models)
Displays the history of gas mileage
Measures the gas mileage.
5 Display the Gas Mileage History screen
1 Display the Gas Mileage screen
Touch [
]>[
] > [Information] >
[Vehicle] > [Gas Mileage Analysis]. (page 63)
6 Display the history of gas mileage
2 Measure the travel distance
1 Displays up to three measurement results.
The "3" mark tuns red during measurement.
[Start] Starts measurement of the travel
distance.
[Stop] Ends measurement of the travel
distance.
1 Input a distance.
[Clear] Erases the entered digit.
If touched more than 1 second, all the input
digits are erased.
[Enter] Registers the distance.
[Cancel] Cancels the input distance.
2 Display the information about the gas
mileage
Notification screen
[Reset] Rests the trip meter.
[Input] Input the information about the
gasoline filled. (Step 3)
[History] Displays the history of mileage. (Step
5)
Input the information about gasoline
Vehicle Maintenance (DNX models)
Displays the maintenance information about the
oil change timing and so forth.
When the set distance is getting close, the
maintenance notification is displayed when the
unit is turns on. Touch the check box, and then
touch the [Close] button to close the display.
3 Display the Input Gas Information screen
1 Displays up to three gas mileages.
[Delete] Deletes the history.
Vehicle Setup (DNX models)
Sets the unit of distance and the unit of amount
of gasoline.
1 Display the Vehicle SETUP screen
Touch [
]>[
] > [Information] >
[Vehicle] > [Vehicle SETUP]. (page 63)
2 Set the units
1 Display the Maintenance screen
]>[
] > [Information] >
Touch [
[Vehicle] > [Maintenance]. (page 63)
2 Select the item to set
[Tire Rotation] Sets the tire rotation timing.
Notification is made when the vehicle has run
the set distance.
[Oil Change] Sets the oil change timing.
Notification is made when the vehicle has run
the set distance.
[Notification Cycle] Sets the distance the
vehicle runs before notification is made.
[Reset] Resets the distance the vehicle has run.
64
DNX7140/DNX7000EX/DDX714/DDX7034BT
4 Inputs the information about gasoline
[Cost per Liter], [Cost per Gallon] Selects the
mode to input the cost per liter/gallon.
[Gallons Filled] Selects the mode to input the
amount of gasoline filled.
1 Input information.
[Clear] Erases the entered digit.
If touched more than 1 second, all the input
digits are erased.
[CALC] Determines the input information and
returns to the previous screen.
[Cancel] Cancels the input information.
[Mile]/ [km] Set the unit of distance.
[Gallon]/ [Liter] Set the unit of amount of
gasoline.
English
65
Setup Menu
Software Information
Checks the software version of this unit.
1 Display the Software Information screen
Touch [
]>[
] > [Information] >
[Software]. (page 63)
Displays the software version.
â
[Language] Select the language used for the
control screen and setting items. (page 66)
[Scroll] Allows scrolling of text display on the
Source Control screen. ( "Manual")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
[Marker] Sets whether to display the target
when touching the panel.
[Drawer Close] Sets whether to close the
function bar automatically. ( "Auto")
[AUD Key Longer than 1 Second] Sets the
function of the [AUD] button. (page 10)
"V.OFF" : Press the [AUD] button for more than
1 second to turn the display off.
"R-CAM" : Press the [AUD] button for more
than 1 second to switch to rear view.
⢠For how to update the software, refer to the relevant
update procedure manual.
Language Setting
User Interface
You can select the display language for the
control screen and audio file tags.
You can setup user interface parameters.
1 Display the User Interface screen
1 Display the User Interface screen
Touch [
]>[
] > [System] > [User
Interface]. (page 63)
Advanced mode (DNX models only)
You can adjust the clock time.
1 Display the Clock Setup screen
[GUI Language Select] Selects the display
language used for the control screen and so
forth. ( "American English")
[Navigation Language Select] Selects the
language used for navigation.
( "American English")
You can adjust the touch panel operations.
1 Display the Touch panel Adjustment screen
Touch [
]>[
(page 63)
] > [System] > [Touch].
2 Adjust the Touch panel
Touch [
]>[
] > [System] > [User
Interface]. (page 63)
2 Display the Language Setting screen
DNX7140/DNX7000EX/DDX714/DDX7034BT
] > [System] > [Clock].
2 Setup the Clock
1 Adjusts hours.
2 Adjusts minutes.
[Reset] Sets "00" minute.
Setup examples: 3:00 â 3:29 \ 3:00
3:30 â 3:59 \ 4:00
[Synchronize] Sets the clock time in
synchronization with the time data sent from
the navigation system or the RDS station. (
DNX models: "Navigation", DDX models: "RDS")
"Off"/ "RDS"/ "Navigation"
When the synchronized mode is set, the clock
cannot be adjusted manually.
3 Adjust the clock time
3 Select a language
66
Touch [
]>[
(page 63)
Touch Panel Adjustment
2 Set the each item
[Beep] Turns the key touch tone On or Off.
( "On")
[Remote Sensor] Selects a remote control
signal. ( "On")
When turned "Off", the remote control of TV
reception is rejected.
Clock Setup
Follow the instruction on the screen and touch
the center of
[Cancel] Cancels the adjustment and returns
to the Touch Panel Adjust screen.
[Reset] Resets to the initial status.
[Select Mode] Selects the mode to select a
language. ( "Easy") (DNX models only)
Touching [Advanced] allows you to select
languages for respective items.
[Language Select] Selects a language.
( "American English")
[Enter] Determines the selected language.
[Cancel] Cancels the selected language.
English
67
Setup Menu
Security Setup
Monitor Angle Control
EXT SW Setup
Reenter the same security code as that you have
entered in Step 4 for confirmation.
You can adjust the position of the monitor.
â
1 Display the Angle Setup screen
Setting up power specification of the external
device for which the power is controlled from this
unit.
6 Reenter the security code
You can set a security code to protect your
receiver system against theft.
â
⢠When the Security Code function is activated, the code
cannot be changed and the function cannot be released.
Note the Security Code can be set as the 4 digit number
of your choice.
⢠If you enter a different security code, the screen
returns to Step 4 (for the first code entry).
7 Register the security code again
1 Display the Security screen
Touch [ ] > [
(page 63)
] > [System] > [Security].
2 Setup the SI (Security Indicator)
] > [System] > [Angle].
2 Set the Monitor Angle
1 Display the Angle Setup screen
Touch [
]>[
(page 63)
] > [System] > [EXT SW].
2 Perform EXT SW Setup
Now, your security code is registered.
If you have pressed the Reset button or if you
have disconnected the Receiver from battery...
1 Enter the correct security code
[Security Code Set] Displays the Security code
input screen.
[SI] Turns the SI function on or off.
If turned "On", the SI indicator on the front
panel flashes when the vehicle ignition is off.
( "On")
Touch [
]>[
(page 63)
You must enter the same security code as that
you have entered in Step 4.
2 Register your security code
3 Start Security Code setup
1 Sets the Monitor angle.
[Memory] Stores the current monitor angle as
the angle during power off.
[SW Name] Sets the name of the external
device. See (page 47) for
information on how to enter the name.
[Output Pattern] Sets the power signal output
mode.
( EXT SW1: Pulse, EXT SW2: Level)
"Pulse": Generates a single power signal pulse.
Now, you can use your Receiver.
â
⢠If you have already completed the code registration,
[CLR] is displayed.
4 Enter a security Code
"Level": Continues output of high power signal.
Sets to turn output on/off each time
the button on the EXT SW Control
screen is touched.
[Pulse Set] Sets the Pulse signal output time.
Outputs 500ms when "1" is set. Increases by
200ms with each step. Up to 100 steps can
be set.
Input four-digit number.
5 Register your security code
68
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
69
Setup Menu
Setup Memory
Audio Control, AV-IN SETUP, AV Interface,
Navigation, and Audio SETUP settings can be
memorized. The memorized settings can be
recalled at any time. For example, even when the
settings are cleared due to replacement of the
battery, the settings can be restored.
1 Display the SETUP Memory screen
Touch [
]>[
] > [System] > [SETUP
Memory]. (page 63)
4 Memorize or recall the settings
When memorizing the Audio Setup and AV
Interface settings:
If settings have already been memorized, a
confirmation message appears. Touch [Yes]. To
cancel memorization, touch [No].
When recalling the memorized settings:
Entering Background
Loads a image for background.
1 Connect the device which has the image
to load
]>[
] > [Display] >
Touch [
[Background]. (page 63)
3 Display the Background Memory screen
When clearing the currently memorized
settings:
5 Quit memorization/recalling of settings
1 Rotates the image.
â
⢠See (page 7) for readable image
specifications.
⢠This operation is not possible when USB is selected as
the source.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel recalling, touch
[No].
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
2 Display the Background screen
2 Start Setup Memory
[Lock] Locks the AV-IN SETUP, Navigation,
and Audio SETUP settings. When [Lock] is
selected, you cannot change the AV-IN SETUP,
Navigation, and Audio SETUP settings.
[No] Memorizes or recalls the settings. To
cancel the function, touch [No]. To cancel
memorization, touch [No].
The SETUP Menu screen appears again.
6 Load the image
Background Change
Selects a image for background.
[Change] Selects a image for background.
[Delete] Deletes the background image.
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
4 Select a medium
1 Select Background Change screen
2 Select a image for background
3 Select a desired function
5 Select the image to load
1 Returns to the initial background.
3 Set the image as the background
[Recall] Recalls the memorized settings.
[Memory] Memorizes the current Audio Setup
and AV Interface settings.
[Clear] Clears the currently memorized
settings.
70
DNX7140/DNX7000EX/DDX714/DDX7034BT
1 Lists the files.
[ ] When
is appeared, the text display is
scrolled by touching it.
ROOT] Moves to the top hierarchy level.
UP] Moves up a hierarchy level.
English
71
Setup Menu
Panel Color Coordinate
Sets the screen and button illumination color.
[Blue Value] Adjusts the Blue.
3 Select a Preset number to register
1 Display the Color screen
Touch [
]>[
(page 63)
] > [Display] > [Color].
Screen Control
Registering Bluetooth Unit
You can adjust the screen mode of the monitor.
Registers the Bluetooth unit to be connected.
1 Display the Screen Control screen
1 Display the Bluetooth Setup screen
Touch [
]>[
Control]. (page 63)
2 Display the Panel Color Coordinate screen
] > [Display] > [Screen
2 Set the each item
Touch [
]>[
(page 63)
] > [Bluetooth SETUP].
2 Display the Connect Device List screen
2 sec.
Adjusted color is registered to the selected
Preset button.
4 Complete the color coordination
[Panel Color Scan] When set to "ON", the
illumination color of the screen and buttons
changes one after another.
3 Select a color
1 Sets to the touched color.
[SET] Sets and registers favorite color to the
preset buttons ([P1] â [P3]).
To register your original color
1 Start the RGB coordinate
2 Adjust the each color value
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesnât dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting. (DNX models only)
â
⢠In this Screen Control screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the (page 49).
3 Search for a Bluetooth unit
1 Displays the registered Bluetooth units.
The busy service becomes active. The available
service becomes inactive.
[ ] When
is appeared, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(paring) operation.
â
⢠A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See (page
75).
1 Selects a preset number to register.
[Red Value] Adjusts the Red value.
[Green Value] Adjusts the Green value.
72
DNX7140/DNX7000EX/DDX714/DDX7034BT
Next page 3
English
73
Setup Menu
4 Select the Bluetooth unit to register
Registering Special Bluetooth Unit
Registers Special Bluetooth unit that results in
error by normal operation by selecting from
model name.
Registering Bluetooth Unit PIN Code
Bluetooth Unit Connection
Sets the PIN code of the Bluetooth unit to enter
when registering (pairing) from the cell-phone or
audio player side.
Selects the Bluetooth unit to connect.
1 Display the Special Device List screen
1 Display the Bluetooth Setup screen
]>[
Touch [
(page 63)
1 Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
2 Select a model name
] > [Bluetooth SETUP].
1 Display the Bluetooth Setup screen
Touch [
]>[
(page 63)
] > [Bluetooth SETUP].
2 Display the Connect Device List screen
2 Display the Receiver PIN Code screen
5 Enter PIN code
3 Select a registered Bluetooth unit
Displays the Bluetooth unit name that can be
registered.
3 Enter PIN code
3 Confirm whether to register
1 Enters a code number.
[Enter] Enter the PIN code specified for the
Bluetooth unit to register.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
â
⢠You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see (page 75).
⢠If the error message appears even though the PIN code is
correct, try .
74
DNX7140/DNX7000EX/DDX714/DDX7034BT
4 Select the service to use
â
⢠Only models in Bluetooth unit name list can be
registered.
4 Go through the procedure of and complete the
registration (pairing).
1 Enters a code number.
[Cancel] Cancels registration of PIN code.
[Enter] Enters PIN code.
[Clear] Clears the code number.
[TEL (HFP)] Connects/disconnects cell-phone
to use for Hands Free.
[Audio (A2DP)] Connects/disconnects Audio
player to use for Bluetooth Audio.
[Remove] Deletes registration (pairing).
Touching the screen displays a confirmation
message. Touch [Yes]. To cancel clearing, touch
[No].
English
75
Setup Menu
AV Input Setup
AV Interface Setup
Navigation Setup
You can set AV input parameters.
You can set audio and visual (AV) interface
parameters.
You can set Navigation parameters.
1 Display the AV-IN Setup screen
Touch [
63)
]>[
] > [AV-IN SETUP]. (page
2 Set the each item
1 Display the AV Interface screen
Touch [
]>[
] > [AV Interface]. (page 63)
1 Display the Navigation Setup screen
Touch [
]>[
] > [Navigation]. (page 63)
[On Screen Navigation] Sets an on-screen
display of the navigation screen. ( "Off")
(DDX models only)
"Auto": Information is displayed for 5 seconds
when updated.
"Off": Information is not displayed.
2 Set the each item
2 Set the each item
1 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT port. ( "VIDEO")
[AV-IN Interruption] Sets an image display of
the system that is connected via the AV INPUT
port. ( "OFF")
"OFF": When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"ON": When an image signal is entered via the
AV INPUT port, this image is displayed.
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal
which iPod is connected. ( "iPod")
76
DNX7140/DNX7000EX/DDX714/DDX7034BT
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. ( "AV-IN")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
( "Off")
"On": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"Off": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse" and then pressing the
[AUD] button for more than 1 second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
(page 66).
[R-CAM Mirror] You can flip the left and right
of the rear view camera video display. Set to
"On" and the rear view will be displayed left
and right in mirror image on the screen.
( "Off")
[NAV Interrupt Speaker] Selects speakers
used for voice guidance of the navigation
system.
( "Front All")
"Front L": Uses the front left side speaker for
voice guidance.
"Front R": Uses the front right side speaker for
voice guidance.
"Front All": Uses both front speakers for voice
guidance.
[NAV Voice Volume] Adjusts the volume for
voice guidance of the navigation system.
( DNX models: "25", DDX models: "21")
[Line Mute] Mutes the volume during voice
guidance of the navigation system.
( "On")
When turned "On", the volume level drops for
voice guidance.
[Navigation Input] Selects a navigation
system connection. ( "RGB") (DDX models
only)
"RGB": Allows the Kenwoodâs Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation system
to connect via the AV INPUT1 port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
English
77
Setup Menu
DSP Bypass Control
Temporarily bypassing DSP (Digital Signal
Processor) System.
1 Display the Audio SETUP screen
Touch [
63)
]>[
] > [Audio SETUP]. (page
front speakers, set the tweeter to "On". In the
"On" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
3 Set the crossover
[Adjust] Displays the Car Type Adjust screen.
You can adjust the digital time alignment that
was set automatically when you selected the
car type.
Speaker Location setup
1 Display the Speaker Location Setup screen
2 Set the DSP Select
3 Select a speaker type
[Bypass] There is no effect by DSP.
[Through] There is an effect by DSP.
â
⢠When the mode is set to [Bypass], DSP System cannot
be adjusted.
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
You can select any of the following speaker
types.
"Front" OEM, 4 inch, 5 inch, 6-1/2 inch, 6-3/4
inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" NONE, OEM, 4 inch, 5 inch, 6-1/2 inch,
6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" NONE, 6 1/2 inch, 8 inch, 10 inch,
12 inch, 15 inch over
â
⢠Select "NONE" if you have no speakers.
1 Display the Speaker Select screen
]>[
] > [Audio SETUP] >
Touch [
[Speaker Select]. (page 63)
2 Select a speaker you wish to adjust
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
[Phase] Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to "Reverse".
Sets the sub woofer phase. (Only when
"Subwoofer" is set to "ON" in Audio Setup)
[HPF FREQ] High Pass Filter adjustment.
(When front speaker or rear speaker is selected
on Speaker Select screen)
[LPF FREQ] Low Pass Filter adjustment. (When
Subwoofer is selected on Speaker Select
screen)
[Slope] Sets a crossover slope.
Car Type (DTA) Setup
You can setup the car type and speaker network,
etc.
2 Set the speaker locations
[Front Speaker] Sets the location of the front
speaker.
"Door", "On Dash", "Under Dash"
[Rear Speaker] Sets the location of the rear
speaker.
"Door", "Rear Deck"
"2nd Row", "3rd Row" (Minivan, Minivan (Long))
1 Display the Car Type Setup screen
]>[
Touch [
Type]. (page 63)
] > [Audio SETUP] > [Car
2 Setup the Car Type
Car Type Adjust
You can manually set the sound output timing of
each channel.
1 Display the Car Type Adjust screen
If your car type is selected, the Digital Time
Alignment and Equalizer is set automatically (for
timing adjustment of sound output for each
channel) to have the highest surround effects.
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
2 Select a speaker you wish to adjust
2 Display the Crossover setup screen
1 Front speaker
2 Rear speaker
3 Subwoofer
[Tweeter] You can set the tweeter when you
are selecting front speakers.
If you are using a tweeter together with the
78
DNX7140/DNX7000EX/DDX714/DDX7034BT
1 Sets up the car type you use together with
this unit.
You can choose according to type of your car.
"OFF", "Compact", "Full Size Car", "Wagon",
"Minivan", "SUV", "Minivan (Long)"
[Location] Sets the locations of the speakers.
1 Front speaker
2 Rear speaker
3 Subwoofer
Next page 3
English
79
Setup Menu
DVD Setup
3 Set a delay time
You can set up the DVD play.
1 Display the DVD Setup screen
Touch [
]>[
] > [DVD SETUP]. (page 63)
2 Set the each item
Make fine adjustment of the delay time of the
speaker output specified at to have a more suitable environment for
your vehicle.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the
ears of the person sitting in the front seat, and
set the right and left positions to the center of
the vehicle interior.
2 Measure the distances from the reference
point to the speakers.
3 Calculate the distance difference in
accordance with the farthest speaker.
+3.4feet
1.6feet
2.5feet
5feet
+2.5feet
+0feet
80
DNX7140/DNX7000EX/DDX714/DDX7034BT
[Screen Ratio] Selects the screen display
mode.*1 ( "16:9")
"16:9": Displays wide pictures.
"4:3 LB": Displays wide pictures in the Letter
Box format (having black stripes at the
top and bottom of screen).
"4:3 PS": Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
[Parental Level] Displays the Parental Lock
screen.*1 ( "Off")
(See , page 81)
[Disc SETUP] Makes the settings related to the
disc media. (See , page 82)
[Output] Keep "Auto" to use.*1
â
⢠*ď˘ Disabled when a DVD is being played.
[Original] Sets the DVD's original language
(only when setting an audio language).
[Clear] Clears the language code.
4 Set the language you use
DVD Parental Level Setup
Sets a parental level.
1 Display the DVD Setup screen
]>[
Touch [
] > [DVD SETUP]. (page 63)
2 Display the Parental Level code number
screen
DVD Language Setup
Selects a language you use for the speech and
menus.
1 Display the DVD Setup screen
Touch [
[Menu Language] Selects a disc menu
language.*1
(See , page 81)
[Subtitle Language] Selects a subtitle
language.*1
(See , page 81)
[Audio Language] Selects an audio
language.*1
(See , page 81)
[Dynamic Range Control] Sets the dynamic
range.*1 ( "Dialog")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen to
the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play stop
mode.
[Angle Mark] Sets an angle mark display.
( "On")
]>[
] > [DVD SETUP]. (page 63)
2 Select the language item to set
3 Enter the code number
3 Enter a language code
See (page 95) and
select the desired language.
1 Enters a language code.
[Cancel] Cancels the language setup and
returns to the "DVD SETUP" screen.
[Enter] Sets the language and returns to the
"DVD SETUP" screen. (It appears after you have
entered a language code.)
1 Enters a code number.
[Cancel] Cancels the current setup and returns
to the "DVD SETUP" screen.
[Level] Indicates the present parental lock
level.
[Enter] Determines the code number and
displays the Parental Level setup screen.
[Clear] Clears the code number.
â
⢠The number you enter first is set as your code
number.
Next page 3
English
81
Setup Menu
4 Display the Parental Level SETUP screen
5 Select a parental level and complete the
setup
Selects a parental level.
â
⢠If a disc has higher parental lock level, you need to enter
the code number.
⢠The parental lock level varies depending on a loaded
disc.
⢠If a disc has no parental lock, anybody can play it back
even when you have set the parental lock.
Disc Setup
Performs setup when using disc media.
[Picture Display Time] Selects a picture
display time. *1 ( "Long")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[CD Read] Sets a music CD playback. *2 ( "1")
"1": Automatically recognizes and plays back
an Audio file disc, a DVD or a music CD.
"2": Forcibly plays back a disc as a music CD.
Select "2" if you wish to play a music CD
having a special format or if you cannot
play a disc in the "1" position.
[On Screen DVD] Sets an on-screen display of
the DVD Playback screen. ( "Manual")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
â
⢠*1 Disabled when a DVD is being played.
⢠*2 You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs
in the "2" position.
USB Setup
iPod Setup
Performs setup when using USB.
Performs setup when using iPod.
1 Display the USB Setup screen
1 Display the iPod Setup screen
Touch [
]>[
] > [USB SETUP]. (page 63)
2 Set the each item
[Picture Display Time] Selects a picture
display time. ( "Long")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
[On Screen USB] Sets an on-screen display of
the USB Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
Touch [
]>[
] > [iPod SETUP]. (page 63)
2 Set the each item
[AudioBook Speed] Sets the Audio book
playback speed. ( "Normal")
[Wide Screen] Sets Wide Screen on or off.
( "OFF")
[On Screen iPod] Sets an on-screen display of
the iPod Playback screen. ( "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
â
⢠"Wide Screen" cannot be set while the iPod is connected.
1 Display the DVD Setup screen
Touch [
]>[
] > [DVD SETUP]. (page 63)
2 Display the Disc Setup screen
3 Set the each item
82
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
83
Setup Menu
SIRIUS Parental Code Setup
SIRIUS Parental Lock Setup
SIRIUS Parental Lock Channel Select
Sets a SIRIUS Parental code.
Sets a SIRIUS Parental Lock function on or off.
Selects the channel to enable SIRIUS Parental lock
function.
1 Display the SIRIUS Setup screen
1 Display the SIRIUS Setup screen
]>[
Touch [
63)
4 Enter the new code number
] > [SIRIUS SETUP]. (page
Touch [
63)
2 Display the Parental Code screen
]>[
] > [SIRIUS SETUP]. (page
2 Display the Parental Code screen
1 Display the SIRIUS Setup screen
Touch [
63)
]>[
] > [SIRIUS SETUP]. (page
2 Display the Parental Code screen
5 Confirm the code number
Enter the same code number as you input in
step 4.
â
â
⢠If you have already completed the code registration,
[Change] is displayed.
⢠If you want to clear the code which has already
registered, touch [Clear].
⢠Pressing [Clear] for 5 seconds or longer deletes the
code.
⢠You need to complete
beforehand.
SIRIUS Parental code is now set, and the display
returns to SIRIUS Setup screen.
3 Enter the code number
3 Enter the code number
Enter the same code number as you input in
.
Enter the same code number as you input in
(page 84).
3 Enter the current code number
4 Select a category
1 Enters a code number.
[Cancel] Cancels the current setup and returns
to the SIRIUS Setup screen.
[Enter] Determines the code number and
displays the Parental Code 1st screen.
[Clear] Clears the code number.
â
⢠If you are to register the parental code for the first
time, this screen will not appear. Go to Step 4.
84
DNX7140/DNX7000EX/DDX714/DDX7034BT
Parental Lock function is now set to on or off,
and the display returns to "SIRIUS SETUP" screen.
â
⢠If you have not registered the parental code, the code
number you input in this step will be the number to
register as SIRIUS Parental Code. In this case, you are
requested to input the code once more.
1 Category list
If touched a category, it Displays all the
channels in the selected category.
[All Channel] Displays all the channels.
English
85
Remote Controller
Setup Menu
The TV signal receiving areas can be set. (with the
optional accessory TV Tuner connected only)
1 Displaying TV SETUP screen
Touch [
1 Channel list
2 Sets the Parental lock function on or off for
each channel.
You need to input the Parental code to switch
the Parental lock function on or off.
3 Displays the sort sequence
[Info Change] Switch the sort sequence of
the channel list. ("Channel", "Song title", "Artist",
"Composer" and "Category")
[ UP] Moves to SIRIUS Category Select Setup
screen.
]>[
] > [TV SETUP]. (page 63)
2 Set the each item
¤
⢠Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
⢠Do not place the battery near an open flame or heat source. This may cause the battery to explode.
⢠Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
⢠Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.
2CAUTION
⢠Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation may result.
Battery installation
Remote Controller mode switch
Use two "AAA"/"R03"-size batteries.
Insert the batteries with the + and â poles aligned
properly, following the illustration inside the case.
The functions operated from the remote
controller differ depending on the position of the
mode switch.
DISP
SRC
V.SEL
ZOOM
MENU
OUT
AUD
IN
POSITION
AUD
[On Screen TV] Sets an on-screen display of
the TV screen.
( "Auto") (with the optional accessory TV
tuner connected only)
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
For DNX7140/ DNX7000EX/ DDX7034BT : This unit can be operated using the Remote Controller supplied
with this unit.
For DDX714 : Optional Remote Controller KNA-RCDV330 is designed for controlling this unit.
ENTER
ROUTEM
AUDIO RETURN
CANCEL
VOICE
AV OUT
OPEN
VIEW
MAP DIR
FM+
TVU
NAVI
DVD U
SUBTITLE
ANGLE
TVU
NAVI
MODE/TOP MENU FNC/MENU/PBC
DVD U
TV Setup
5 Set the parental lock for each channel
ZOOM
VOL
AMâ
2 ZONE
2ABC 3 DEF
4 GHI
5JKL 6MNO
R.VOL
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
BS
ATT
â
⢠If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.
AUD mode
Switch to this mode when controlling a selected
source or tuner source, etc.
DVD mode
Switch to this mode when playing DVDs or CDs etc.
with the player integrated in this unit.
TV mode
This is switched when controlling TV.
NAVI mode
This is switched when controlling Navigation unit.
â
⢠The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
⢠When controlling a player that is not integrated in the
unit, select "AUD" mode.
86
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
87
Remote Controller
NAVI
AUDIO RETURN
CANCEL
VOICE
MAP DIR
SUBTITLE
VIEW
MAP DIR
DISP
ZOOM
MENU
OUT
MAP DIR
ANGLE
VOL
ZOOM
AUD
â˘
DVD â˘
TVâ˘
â˘
NAVI
2 ZONE
2 ZONE
2ABC 3 DEF
DISP
ENTER
Enters options.
MENU
OUT
IN
IN
POSITION
AUD
ENTER
DVD â˘
TVâ˘
â˘
NAVI
MAP DIR
ANGLE
ENTER
MODE/TOP MENU FNC/MENU/PBC
ROUTEM
OPEN
VIEW
MAP DIR
TVâ˘
â˘
NAVI
AUDIO RETURN
ANGLE
R.VOL
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
BS
ATT
V.SEL
Switches to the navigation screen.
MODE
Switches the screen mode.
Screen mode changes each time you press this key.
MODE/TOP MENU FNC/MENU/PBC
ROUTEM
AUDIO RETURN
OPEN
VIEW
MAP DIR
DISP
BS
ATT
FM+
Title number
Chapter number
Play time
Item number*
Cancel
* You may not be able to use this function with some discs
or scenes.
V.SEL
ZOOM
MENU
OUT
IN
POSITION
â˘
DVD â˘
TVâ˘
AUDIO RETURN
CANCEL
VOICE
OPEN
VIEW
MAP DIR
SUBTITLE
FM+
DVD Menu
Displays the DVD menu.
Turns the playback control on or off while playing
VCD.
ENTER
MODE/TOP MENU FNC/MENU/PBC
ROUTEM
OPEN
VIEW
MAP DIR
CANCEL
SUBTITLE
ANGLE
FM+
SUBTITLE
Switches the subtitle language.
NAVI
ROUTEM
VOICE
AV OUT
OPEN
VIEW
MAP DIR
AUDIO RETURN
CANCEL
SUBTITLE
ANGLE
Title number
Play time
Cancel
AUDIO RETURN
VOICE
AV OUT
â˘
TVâ˘
â˘
NAVI
MODE/TOP MENU FNC/MENU/PBC
DVD-VR
AUD
ENTER
ROUTEM
AV OUT
TVâ˘
â˘
NAVI
ANGLE
Pressing this key switches the features that can be
searched directly.
SUBTITLE
ANGLE
SRC
CANCEL
VOICE
AV OUT
TVâ˘
â˘
NAVI
5JKL 6MNO
ENTER
MODE/TOP MENU FNC/MENU/PBC
DVD-VIDEO
SUBTITLE
2 ZONE
2ABC 3 DEF
JKL
DVD Top Menu
Returns to the DVD top menu.
DIRECT
CANCEL
VOICE
AV OUT
DVD â˘
GHI
4 GHI
TVâ˘
Function
Switches the function screen
ATT
ABC
R.VOL
7PQRS 8TUV 9WXYZ
CLEAR
Rear volume control
Adjusts volume at rear when the Dual Zone
function is ON.
VOL
ZOOM
R.VOL
BS
â˘
DVD â˘
Direct search
⢠Specify the number to search in direct search.
⢠Press 1
to fast forward/backward.
Switches the fast forward/backward speed each
time you press this key.
to slow forward/backward.
⢠Press 4
Switches the slow playback speed each time you
press this key.
5JKL 6MNO
AUD
ENTER
SUBTITLE
FM+
4 GHI
POSITION
2 ZONE
IN
2ABC 3 DEF
OPEN
VIEW
DIRECT
OUT
CANCEL
AV OUT
VOL
ZOOM
AMâ
MENU
AUDIO RETURN
VOICE
ROUTEM
V.SEL
ZOOM
TVâ˘
Stop
Memorizes the last point where the disc stopped.
When pressed again, the last point is deleted.
SRC
MODE/TOP MENU FNC/MENU/PBC
5JKL 6MNO
â˘
DVD â˘
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
Hands-free communication
When a call comes in, it answers the call.
4GHI
AUD
ENTER
ATT
Dual Zone
Switches the Dual Zone function ON and OFF.
2 ZONE
7PQRS 8TUV 9WXYZ
DISP
BS
2ABC 3 DEF
POSITION
â˘
ZOOM
OUT
DIRECT
CLEAR
R.VOL
CLEAR
V.SEL
ZOOM
2ABC 3 DEF
Numeric keypad
R.VOL
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [ENTER] key.
ENTER
Play/Pause
Pauses the track.
Press again to resume playing.
MENU
7PQRS 8TUV 9WXYZ
AMâ
Volume attenuator
Press the key once to lower the volume. Press again
to restore the previous volume.
POSITION
VOL
ZOOM
AMâ
SRC
IN
ENTER
FM+
FM+
â˘
Cursor key
Moves the cursor when displaying menu.
DVD â˘
Volume control
Adjusts the volume.
AUD
ENTER
FM+
POSITION
â˘
VIEW
VOL
IN
ANGLE
OUT
MENU
FM+
ZOOM
V.SEL
ANGLE
SRC
OPEN
VIEW
Scene number
Number
Cancel
AV OUT
Track search and file search
Selects the track or file to be played.
ROUTEM
VCD 2.X (PBC ON)
MODE/TOP MENU FNC/MENU/PBC
DVD/VCD (DVD mode)
Source switching
Switches to the source to be played.
Display angle
Switches the display angle each time it is pressed.
Common operations (AUD mode)
ZOOM
VOL
VCD 1.X, VCD 2.X (PBC OFF)
Track number
Cancel
Next page 3
88
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
89
Remote Controller
DISP
V.SEL
ZOOM
MENU
MENU
POSITION
ANGLE
AUD
TVâ˘
Picture Angle
Switches the picture angle each time you press this
key.
7PQRS 8TUV 9WXYZ
CLEAR
BS
ATT
2 ZONE
VOICE
OPEN
VIEW
MAP DIR
CANCEL
Music Disc
2 ZONE
2ABC 3 DEF
Audio files in DVD/CD disc
BS
â˘
DVD â˘
TVâ˘
â˘
NAVI
AUDIO RETURN
ZOOM
Zooms in or out the navigation map.
DISP
SRC
V.SEL
ZOOM
DIRECT
AUD
ENTER
MODE/TOP MENU FNC/MENU/PBC
R.VOL
POSITION
MENU
OUT
ATT
IN
POSITION
AUD
ENTER
â˘
DVD â˘
TVâ˘
Example: 92.1MHz (FM)
Once you have switched to the direct search
feature, specify the search number from the
numeric keypad, and then press [ENTER] key.
Numeric keypad
2ABC
4GHI
5JKL 6MNO
MENU
OUT
4GHI
ZOOM
7PQRS 8TUV 9WXYZ
2 ZONE
2ABC 3 DEF
CLEAR
5JKL 6MNO
CLEAR
DIRECT
BS
ENTER
ATT
BS
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
ATT
⢠To use preset tuning, press the number of a
programmed broadcast station. ( 1 â 6 )
⢠Press the direct tuning key first, then specify the
frequency of the station to receive.
ROUTEM
VOICE
AV OUT
OPEN
VIEW
MAP DIR
â˘
TVâ˘
â˘
NAVI
DIRECT
TVâ˘
CANCEL
Displays previous screen.
R.VOL
â˘
DVD â˘
2ABC 3 DEF
R.VOL
POSITION
AUD
ENTER
VOL
AMâ
IN
2 ZONE
7PQRS 8TUV 9WXYZ
V.SEL
ZOOM
Numeric keypad
2 ZONE
2ABC 3 DEF
DISP
SRC
ANGLE
8TUV
9WXYZ
Example: 810kHz (AM)
FM+
MENU
Displays Main menu.
Folder search
Selects the folder to be played.
CLEAR
ENTER
7PQRS 8TUV 9WXYZ
Folder number
File number
Cancel
Music Disc/Audio file/Video file/ Picture
file (AUD mode)
AMâ
Direct tuning
After pressing this key, use the keypad to specify
the broadcast station you wish to receive.
Track number
Play time
Cancel
IN
VOL
SUBTITLE
ANGLE
OUT
ROUTEM
ZOOM
TVâ˘
â˘
NAVI
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
AV OUT
DVD â˘
MENU
ENTER
AUDIO
Switch Voice Language
Switches the voice language each time you press
this key.
Pressing this key switches the features that can be
searched directly.
ZOOM
FM+
ENTER
Performs the selected function.
ZOOM
AMâ
VOL
TVâ˘
â˘
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
MAP DIR
ANGLE
â˘
DVD â˘
NAVI
VIEW
ANGLE
2 ZONE
SUBTITLE
FM+
Station selection
Switches to broadcast stations received by the unit.
DIRECT
CANCEL
MAP DIR
AMâ
VIEW
AUD
ENTER
CANCEL
SUBTITLE
ANGLE
OPEN
VOL
AV OUT
ZOOM
VOICE
POSITION
2ABC 3 DEF
IN
R.VOL
ROUTEM
Direct search
OUT
â˘
DVD â˘
ENTER
FM+
2 ZONE
ZOOM
IN
2ABC 3 DEF
OUT
SRC
VOL
ZOOM
AMâ
Joystick
Scrolls the map, or moves the cursor.
FM+
Band switching
Switches to bands received by the unit.
ANGLE
NAVI (NAVI mode)
MAP DIR
Radio (AUD mode)
VIEW
Memorizes the last point where the disc stopped.
When pressed again, the last point is deleted.
(Disc media only)
ZOOM
Switches the zoom ratio each time you press this
key.
MNO
Track search and file search
Selects the track or file to be played.
VIEW
⢠Specify the number to search in direct search.
POSITION
Displays the current position.
MAP DIR
DISP
FM+
SRC
VOL
ZOOM
V.SEL
ZOOM
MENU
AMâ
2 ZONE
2ABC 3 DEF
IN
POSITION
OUT
ENTER
AUD
ANGLE
â˘
DVD â˘
TVâ˘
Play/Pause
Pauses the track.
Press again to resume playing.
DISP
SRC
V.SEL
ZOOM
MENU
OUT
IN
POSITION
AUD
ENTER
â˘
DVD â˘
TVâ˘
Stop
90
DNX7140/DNX7000EX/DDX714/DDX7034BT
Next page 3
English
91
Initial Setup
Remote Controller
CANCEL
VOICE
AV OUT
OPEN
VIEW
MAP DIR
SUBTITLE
ROUTEM
ANGLE
OPEN
VIEW
MAP DIR
SUBTITLE
ANGLE
FM+
SUBTITLE
FM+
VIEW
VOL
ZOOM
ZOOM
2 ZONE
VOICE
OPEN
VIEW
MAP DIR
FM+
CANCEL
SUBTITLE
2 ZONE
2ABC 3 DEF
Direct tuning
(NTSC TV type only)
R.VOL
MAP DIR
Switches between the heading up navigation and
north up navigation map displays.
NAVI
7PQRS 8TUV 9WXYZ
AUDIO RETURN
CANCEL
VOICE
OPEN
MAP DIR
SUBTITLE
ANGLE
ZOOM
DIRECT
BS
ATT
Press this key first, and then specify the station to
receive with the numeric keypad.
Example: In case of Channel 6 (2-digit)
FM+
MODE/TOP MENU FNC/MENU/PBC
VIEW
VOL
CLEAR
AV OUT
ZOOM
AMâ
â˘
AUDIO RETURN
ANGLE
ROUTEM
2 Set the each item
TVâ˘
â˘
NAVI
ENTER
ROUTEM
1 Turns the power On
MAP DIR
VOICE
Plays Voice guidance.
AV OUT
VOL
ANGLE
MODE/TOP MENU FNC/MENU/PBC
Initial Setup
AMâ
Channel Selection
The TV channel to receive is selected.
CANCEL
ANGLE
MAP DIR
AUDIO RETURN
VOICE
AV OUT
OPEN
VIEW
NAVI
MODE/TOP MENU FNC/MENU/PBC
CANCEL
VOICE
AV OUT
VIEW
Switches between 2D and 3D map displays.
ROUTEM
Switching Band/Video
It switches between the station of the TV band to
receive and video input.
ROUTEM
AUDIO RETURN
MODE/TOP MENU FNC/MENU/PBC
â˘
TVâ˘
â˘
NAVI
ENTER
When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
TV (TV mode)
ROUTEM
Displays Route Option menu.
6MNO
VOL
Numeric keypad
2 ZONE
2ABC 3 DEF
4GHI
5JKL 6MNO
R.VOL
7PQRS 8TUV 9WXYZ
CLEAR
DIRECT
BS
ATT
⢠The number of the memorized station is
selected. ( 1 â 6 )
⢠Press the direct tuning key first, then specify the
channel of the station to receive.
MNO
[Language] Select the language used for the
control screen and setting items. (page 66)
[Angle] You can adjust the position of the
monitor. (page 69)
[iPod AV Interface Use] Sets the terminal
which iPod is connected. ( "iPod")
[R-CAM Mirror] You can flip the left and right
of the rear view camera video display. Set to
"On" and the rear view will be displayed left
and right in mirror image on the screen.
( "Off")
[Color] Sets the screen and button illumination
color. (page 72)
[EXT SW] Setting up power specification of
the external device for which the power is
controlled from this unit. (page 69)
3 End initial setup
â
⢠The settings above can be changed in
(page 63).
92
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
93
Status bar Indicator items
Shown below is a list of indicators displayed on
the Status bar.
Source Display Overview
General
Indicates that the attenuator is active.
Turns on the Dual zone function.
Indicates the connection state of the Bluetooth hands-free
unit. (Orange: Connected. White: Not connected.)
DVD/CD "FO-REP" Indicates that the Folder repeat function is ON.
"IN"
Indicates that a disc is inserted.
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"REP"
Indicates that the Repeat function is ON.
"SLIDE" Indicates that the slide show function is ON.
DVD-Vide "C-REP" Indicates that the Chapter repeat function is ON.
"T-REP" Indicates that the Title repeat function is ON.
DVD-VR "1 M/S" Identifies the primary/secondary audio output of stream 1.
"1 MAIN" Identifies the primary audio output of stream 1.
"1 SUB" Identifies the secondary audio output of stream 1.
"PLST" Identifies the Play list mode.
"T-REP" Indicates that the Title repeat function is ON.
VCD
"1chLL" Identifies the left audio output of channel 1.
"1chLR" Identifies the monaural audio output of channel 1.
"1chRR" Identifies the right audio output of channel 1.
"1chST" Identifies the stereo audio output of channel 1.
"LL"
Identifies the left audio output.
"LR"
Identifies the monaural audio output.
"RR"
Identifies the right audio output.
"ST"
Identifies the stereo audio output.
"PBC"
Indicates that the PBC function is ON.
"SVCD" Identifies the Super Video CD.
"VER1" Indicates that the Video CD version is 1.
"VER2" Indicates that the Video CD version is 2.
"REP"
Indicates that the Repeat function is ON.
94
"ATT"
"DUAL"
"TEL"
DNX7140/DNX7000EX/DDX714/DDX7034BT
DVD Language Codes
Source Display Overview
Code
Language
Code
Language
Code
Language
USB/ SD "FO-REP" Indicates that the Folder repeat function is ON.
"MOVIE" Identifies the video file.
"MUSIC" Identifies the music file.
"PICTURE" Identifies the image file.
"RDM" Indicates that the Random function is ON.
"REP"
Identifies that the Repeat function is ON.
"PLST" Indicates that the Play list mode is selected now.
"SLIDE" Indicates that the slide show function is ON.
iPod
"MUSIC" Identifies the music file.
"VIDEO" Identifies the video file.
"RDM" Indicates that the Random function is ON.
"A-RDM" Indicates that the Album random function is ON.
"REP"
Indicates that the Repeat function is ON.
Tuner
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"CRSC" Indicates that the CRSC function is OFF.
"MANU" Indicates that Seek mode is set to Manual.
"PS"
Indicates that the list display format is PS.
"SNPS" Indicates that the list display format is SNPS.
"ST"
Indicates that stereo broadcast is being received.
"TI"
Indicates the reception state of traffic information.
(Orange: TP is being received. White: TP is not being
received.)
HD Radio "AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"MANU" Indicates that Seek mode is set to Manual.
"M/S" Indicates whether the reception channel is main or sub.
"ANALOG" Indicates that analog broadcast is being received.
"DIGITAL" Indicates that digital broadcast is being received.
"ST"
Indicates that stereo broadcast is being received.
SIRIUS/ "SCN" Indicates that the channel scan function is ON.
XM
"SEEK1" Indicates that Seek mode is set to 1.
"SEEK2" Indicates that Seek mode is set to 2.
TV
"AUTO1" Indicates that Seek mode is set to Auto1.
"AUTO2" Indicates that Seek mode is set to Auto2.
"MANU" Indicates that Seek mode is set to Manual.
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
bn
bo
br
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
eu
fa
fi
fj
fo
fr
fy
ga
gd
gli
gn
gu
ha
he
hi
hr
hu
hy
ia
ie
ik
id
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hebrew
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
is
it
ja
jv
ka
kk
kl
km
kn
ko
ks
ku
ky
la
lb
ln
lo
lt
lv
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
ps
pt
qu
rm
rn
ro
ru
rw
sa
sd
sg
sh
Icelandic
Italian
Japanese
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Luxembourgish
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
si
sk
sl
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
te
tg
th
ti
tk
tl
tn
to
tr
ts
tt
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
English
95
Help? Troubleshooting
Some functions of this unit may be disabled by
some settings made on this unit.
! ⢠Cannot set up the subwoofer.
⢠Cannot set up subwoofer phase.
⢠No output from the subwoofer.
⢠Cannot set up the low pass filter.
⢠Cannot set up the high pass filter.
ⲠSubwoofer is not set to On. â
(page 78)
ⲠThe Dual zone function is enabled. â (page 61)
! ⢠Cannot select the output destination of the
subsource in the Dual zone.
⢠Cannot adjust the volume of the rear
speakers.
ⲠThe Dual zone function is disabled. â (page 61)
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
? The Touch Sensor Tone doesnât sound.
â The preout jack is being used.
â The Touch Sensor Tone canât be output from
the preout jack.
Tuner source
? Radio reception is poor.
â The car antenna is not extended.
â Pull the antenna out all the way.
â The antenna control wire is not connected.
â Connect the wire correctly, referring to the
section on .
! Cannot play audio files.
Ⲡ"CD Read" of (page 82) is set to
"2".
! Cannot Folder select.
ⲠThe Random play function is enabled.
! Cannot perform Repeat play.
ⲠThe PBC function is enabled.
! ⢠Cannot set up the equalizer.
⢠Cannot set up the crossover network.
ⲠThe Dual zone function is enabled. â (page 61)
ⲠThe DSP Select is Bypass. â (page 78)
Disc source
? The specified disc does not play, but another
one plays instead.
â The specified CD is quite dirty.
â Clean the CD.
â The disc is loaded in a different slot from that
specified.
â Eject the disc magazine and check the
number for the specified disc.
â The disc is severely scratched.
â Try another disc instead.
Audio file source
? The sound skips when an Audio file is being
played.
â The media is scratched or dirty.
â Clean the media, referring to the CD
cleaning of the section on
(page 6).
â The recording condition is bad.
â Record the media again or use another
media.
96
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
97
Help? Error
When the unit fails to operate correctly, the
cause of the failure appears on the display.
"Error 07â67" :
The unit is not operating correctly due to some reason
or other.
"Protect" :
Protective circuit has been activated because a speaker
cord has shorted or it has come in contact with the car
chassis.
⥠Push the unit's Reset button. If the "Error 07â67"
message does not disappear, see your nearest
Kenwood dealer.
⥠Wire or insulate the speaker cord as appropriate
and then push the Reset button.
"No Device" (USB device):
The USB device is selected as a source although no USB
device is connected.
"Hot Error" :
When the internal temperature of this unit rises to 60°C
or more, the protection circuit is activated and you
may not be able to operate the unit. At such times this
message will appear.
⥠Change the source to any source other than
USB/iPod. Connect an USB device, and change
the source to USB again.
⥠Use the unit again after reducing the
temperature inside the vehicle.
"Hold Error" :
Activation of the protective circuit when the
temperature inside the disc changer is higher than 60
degrees Celsius stops the disc changer from operating.
At such times this message will appear.
⥠Use when the temperature at the site where the
disc changer has been fitted has dropped.
"Mecha Error" :
The disc player is malfunctioning.
⥠Eject the disc and try inserting it again. Contact
the Kenwood dealer if this indicator continues
blinking or the disc cannot be ejected.
"Disc Error" :
An unplayable disc is inserted.
"Read Error" :
Disc is quite dirty.
⥠Clean the disc, referring tot he section on
(page 6).
Disc is upside down.
⥠Load the disc with the labeled side up.
"Region code Error" :
The disc you wanted to play has a region code that
cannot be played with this unit.
"Parental level Error" :
The disc you wanted to play has a higher level than the
parental level you set.
"Disconnected" (iPod, Bluetooth audio player):
The iPod/Bluetooth audio player is selected as a source
although no iPod/Bluetooth audio player is connected.
⥠Change the source to any source other than
iPod/Bluetooth. Connect an iPod/Bluetooth
audio player, and change the source to iPod/
Bluetooth again.
"No Music" :
The connected USB device contains no playable audio
file.
Media was played that doesnât have data recorded that
the unit can play.
"USB Device Error!!" :
The connected USB device is rated a current capacity
higher than the allowable limit.
⥠Check the USB device.
Some trouble may have occurred to the connected
USB device.
⥠Change the source to any source other than USB.
Remove the USB device.
"Authorization Error" :
Connection to the iPod has failed.
⥠Remove the iPod and then reconnect it.
The unit does not support the iPod.
⥠Refer to (page 8).
"Update your iPod" :
The iPod's software is an older version which the unit
can not support.
⥠Confirm that the software for the iPod is the
latest version. Refer to (page 8).
"Update your USB database" :
The USB device is different from the previous one or
the contained audio files are replaced.
⥠Update your database. Refer to of USB Device Control (page 22).
"Check SIRIUS" :
The unit cannot recognize the connected SIRIUS Tuner
Box.
"CH UNAVAILABLE" :
The selected channel is invalid.
⥠Select a different channel.
"CH UNAUTHORIZED" :
The selected channel is not subscribed.
"OFF AIR" :
The broadcast of the selected channel has finished.
⥠Check the connection of the SIRIUS Tuner Box.
"Antenna Error" :
Something is wrong with the anntena.
⥠Check the connection of the antenna.
"Acquring Signal" :
The unit cannot receive any signal.
⥠Move the vehicle to the area where the unit can
receive signal.
"Updating Firmware" :
Updating the firmware of SIRIUS tuner.
⥠Operation is invalid until the update is
completed.
"Updating Channels **% Completed" :
Updating the SIRIUS Channel Map.
⥠Operation is invalid until the update is
completed.
"Subscription Updated" :
Updating the suscription information.
⥠Operation is invalid until the update is
completed.
"Invalid Channel" :
The selected channel is invalid.
⥠Select a different channel.
"Call 888-539-SIRIUS to Subscribe" :
The selected channel is not subscribed.
⥠Call the displayed number for subscription.
"CHECK XM TUNER" :
The unit cannot recognize the connected XM Tuner.
⥠Check the connection of the XM Tuner.
"NO SIGNAL" :
The unit cannot receive any signal.
⥠Check the connection of the antenna.
"CHECK ANTENNA" :
Something is wrong with the antenna.
⥠Check the connection of the antenna.
98
DNX7140/DNX7000EX/DDX714/DDX7034BT
English
99
Specifications
Monitor section
USB interface section
FM tuner section
Audio section
Picture Size
: 6.95 inches (diagonal) wide
: 156.2 mm (W) x 82.4 mm (H)
Display System
: Transparent TN LCD panel
Drive System
: TFT active matrix system
Number of Pixels
: 336,960 (480H x 234V x RGB)
Effective Pixels
: 99.99 %
Pixel Arrangement
: RGB striped arrangement
Back Lighting
: Cold Cathode Fluorescent Tube
USB Standard
: USB 1.1/ 2.0 High speed
File System
: FAT 16/ 32
Maximum Power Supply Current
: 500 mA
D/A Converter
: 24 Bit
Video Decoder
: MPEG1/ MPEG2
Audio Decoder
: MP3/ WMA/ AAC/ WAV (Linear PCM)
Frequency Range
200 kHz : 87.9 MHz â 107.9 MHz
(DNX7140/DNX7000EX/DDX714)
50 kHz : 87.5 MHz â 108.0 MHz (DDX7034BT)
Usable Sensitivity (S/N : 30 dB)
: 9.3 dBf (0.8 ÎźV/ 75 âŚ)
Quieting Sensitivity (S/N : 50 dB)
: 15.2 dBf (1.6 ÎźV/ 75 âŚ)
Frequency Response (Âą 3.0 dB)
: 30 Hz â 15 kHz
S/N Ratio (dB)
: 70 dB (MONO)
Selectivity (Âą 400 kHz)
: ⼠80 dB
Stereo Separation
: 35 dB (1 kHz)
Maximum Power (Front & Rear)
: 50 W x 4
Full Bandwidth Power (Front & Rear)
(4 âŚ, 14.4 V, 1 % THD)
: 22 W x 4
Preout Level (V)
: 2 V/ 10 kâŚ
Preout Impedance
: ⤠600 âŚ
Speaker Impedance
:4â8âŚ
DVD player section
D/A Converter
: 24 bit
Audio Decoder
: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/
AAC/ WAV
Video Decoder
: MPEG1/ MPEG2
Wow & Flutter
: Below Measurable Limit
Frequency Response
Sampling frequency; 96 kHz : 20 â 44,000 Hz
Sampling frequency; 48 kHz : 20 â 22,000 Hz
Sampling frequency; 44.1 kHz : 20 â 20,000 Hz
Total Harmonic Distortion
: 0.008 % (1 kHz)
S/N Ratio (dB)
: 98 dB (DVD-Video 96 kHz)
Dynamic Range
: 98 dB (DVD-Video 96 kHz)
Disc Format
: DVD-Video/ VIDEO-CD/ CD-DA
Sampling Frequency
: 44.1/ 48/ 96 kHz
Quantifying Bit Number
: 16/ 20/ 24 bit
100
DNX7140/DNX7000EX/DDX714/DDX7034BT
Bluetooth section
Technology
: Bluetooth Ver.1.2 Certified
Frequency
: 2.402 â 2.480 GHz
Output Power
: +4dBm (MAX), 0dBm (AVE), Power Class2
Maximum Communication range
: Line of sight approx. 10m (32.8 ft)
Profile
HFP (Hands Free Profile), SPP (Serial Port Profile),
HSP (Headset Profile), A2DP (Advanced Audio
Distribution Profile), AVRCP (Audio/Video
Remote Control Profile), OPP (Object Push
Profile), PBAP (Phonebook Access Profile), SYNC
(Synchronization Profile)
AM tuner section
Frequency Range (10 kHz)
: 530 kHz â 1700 kHz
Usable Sensitivity
: 28 dBÎź
Video section
Color System of External Video Input
: NTSC
External Video Input Level (mini jack)
: 1 Vp-p/ 75 âŚ
External Audio Max Input Level (mini jack)
: 2 V/ 25 kâŚ
Video Output Level (RCA jacks)
: 1 Vp-p/ 75 âŚ
Audio Output Level (RCA jacks)
: 1.2 V/ 10 kâŚ
Analog RGB input (DDX714/DDX7034BT only)
: 0.7 Vp-p/ 75 âŚ
DSP Section
Graphics equalizer
Band: 5 Band
Frequency (BAND1 â 5): 62.5/ 250/ 1k/ 4k/ 16k Hz
Gain
: -9/ -8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0/ 1/ 2/ 3/ 4/ 5/
6/ 7/ 8/ 9 dB
X'over
High pass filter
Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/
100/ 120/ 150/ 180/ 220/ 250 Hz
Slope: -6/ -12/ -18/ -24 dB/Oct.
Low pass filter
Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/
150/ 180/ 220/ 250 Hz, Through
Slope: -6/ -12/ -18/ -24 dB/Oct.
Time alignment
: 0 â 17 ft (0.07 ft Step)
Position
: 0 â 5.67 ft (0.07 ft Step)
English
101
Specifications
Navigation section
(DNX7140/DNX7000EX only)
Receiver
: High-sensitivity GPS receiver
Reception Frequency
: 1575.42 MHz (C/A code)
Acquisition Times
Cold : < 38 seconds
Factory Reset : < 45 seconds
(On average for a stationary receiver with a clear
view of the sky)
Accuracy
Position : < 10 meters typical
Velocity : 0.05 m/sec. RMS
Position Method
: GPS
Antenna
: External GPS antenna
2CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product
safety.
External SW
Kenwood Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI
TOKYO, JAPAN
Maximum Power Supply Current
: 500 mA
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
General
Operating voltage
: 14.4 V (10.5 â 16 V allowable)
Maximum Current Consumption
: 15 A
DImensions (W Ă H Ă D)
: 182 Ă 112 Ă 163 mm
7-3/16 x 4-7/16 x 6-7/16 inch
Operational Temperature Range
: -10 °C â +60 °C
Storage Temperature Range
: -20 °C â +85 °C
Weight
DNX7140/DNX7000EX: 2.5 kg (5.5 lbs)
DDX714/DDX7034BT: 2.47 kg (5.4 lbs)
Location : Bottom Panel
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or modification is made.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
⢠Reorient or relocate the receiving antenna.
⢠Increase the separation between the equipment and receiver.
⢠Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
⢠Consult the dealer or an experienced radio/TV technician for help.
IC (Industry Canada) Notice
Specifications subject to change without notice.
Although the effective pixels for the liquid crystal panel is
given as 99.99% or more, 0.01% of pixels may not light or
may light incorrectly.
102
DNX7140/DNX7000EX/DDX714/DDX7034BT
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
The term "IC: " before the certification/registration number only signifies that the Industry Canada technical
specification were met.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation
is under license. Other trademarks and trade names are those of their respective owners.
The "AAC" logo is a trademark of Dolby Laboratories.
Font for this product is designed by Ricoh.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
iTunes is a trademark of Apple Inc.
âMade for iPodâ means that an electronic accessory has been designed to connect specifically to iPod and has been certified
by the developer to meet Apple performance standards.
âWorks with iPhoneâ means that an electronic accessory has been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #âs: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and DTS 2.0 + Digital Out are registered trademarks and the DTS logos and Symbol
are trademarks of DTS, Inc. Š 1996-2008 DTS, Inc. All Rights Reserved.
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : No
Encryption : Standard V2.3 (128-bit)
User Access : Print, Print high-res
XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer : Acrobat Distiller 6.0.1 (Windows)
Modify Date : 2008:12:26 11:17:56+09:00
Create Date : 2008:12:18 11:03:59+09:00
Metadata Date : 2008:12:26 11:17:56+09:00
Document ID : uuid:d6296809-d2b4-4ee4-b3ab-1821e724b6cf
Instance ID : uuid:96f4239f-a02d-4bd4-9c51-c6d0f7802e8c
Format : application/pdf
Title : untitled
Has XFA : No
Page Count : 53
