JVC KENWOOD 403500 USB Adapter Model: KCT-53U User Manual

Download:
Mirror Download [FCC.gov]
Document ID	668268
Application ID	F11LSKp3Jz2bJw4x76bb7g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.07kB (125824 bits)
Date Submitted	2006-06-13 00:00:00
Date Available	2006-06-13 00:00:00
Creation Date	2006-04-19 16:56:07
Producing Software	Adobe PDF Library 7.0
Document Lastmod	2006-05-18 12:26:15
Document Title	Users Manual
Document Creator	Adobe InDesign CS2_J (4.0.2)

USB ADAPTER
KCT-53U
INSTALLATION MANUAL
SUPPLIED ITEMS
•
•
•
USB Adapter (USB to 9-pin RS-232)
Distribution disc with driver software
Installation Manual (B62-XXXX-XX)
SYSTEM REQUIREMENT
© B62-XXXX-00 (W)
Copyrights
•
•
Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
Other product and company names mentioned herein may be
the trademarks of their respective owners.
Operating System:
Windows® 98SE, Windows® Me, Windows® 2000, or Windows® XP
operating system.
INSTALLING THE DRIVER
With the computer power on, plug the KCT-53U into a USB port
on the computer. The [New Hardware Wizard] appears. Click
Next to continue.
ln the dialog box that appears, leave the default choice (search
for the best drivers for your device), and click Next to continue.
In the dialog box that appears, first put the distribution disc into
your CD-ROM drive, choose [Specify a Location], then Browse
to the folder on the disc that corresponds to your version of
Windows. Click Next to continue.
ln the [Ready to install…] dialog box that appears, click Next to
continue. The files will now be copied to your hard disk.
After the drive files have been copied to the hard disk, a dialog
box will appear, telling you that the installation has finished.
Click Finish. Windows will now finish the installation.
Note: The KCT-53U installs as a virtual port driver on Com3. As Such
it does not support devices, such as serial mice, that require an lRQ
number or lO Address.
CONFIRMING THE INSTALLATION
To confirm that the adapter was correctly installed:
1 Open the System folder.
2 Click the Device Manager tab at the top of the dialog box.
3 Click the Plus Sign in front of the Universal Serial Bus
Controller heading to see the Universal Serial Bus Controller
listing. If the installation completed successfully, you should
see an entry for [ATEN USB] to Serial Cable.
UNINSTALLING THE DRIVER
Windows 98SE/Me:
1 Put the distribution disc in your CD-ROM drive.
2 Open the KCT-53U folder.
3 Click UNINST.EXE.
Windows 2000/XP:
1 Open the System folder.
2 Click the Device Manager tab at the top of the dialog box.
3 Click the Plus Sign in front of the Universal Serial Bus
Controller heading to see the Universal Serial Bus Controller
listing.
4 Select [ATEN USB] to Serial Cable.
5 Click the Remove button.
PERIPHERAL INSTALLATION
With the computer power on and the KCT-53U adapter already
plugged into the computer’s USB port, plug the peripheral into
the KCT-53U, then turn the peripheral ON.
Follow the installation Wizard’s on-screen instructions to
complete the installation.
Note:
♦ This procedure only occurs the first time you connect a peripheral.  
If your peripheral was previously connected and configured for the
RS-232 (COM) port, after you perform the Adapter installation and
click Finish (see above), the driver will detect the peripheral and
install it automatically.
♦		Under Windows 2000/XP, if you connect a modem, you must
specify it as a Standard Modem.
♦ 		Please access the following URL for support information:		
http://www.kenwood.com/......
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
One or more of the following statements may be applicable to this
equipment.
FCC WARNING
This equipment generates or uses radio frequency energy. Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if
an unauthorized change or modification is made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY
THE FCC
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can generate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer for technical assistance.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:c87c3677-ee3b-4ed4-80bf-940b156b7114
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Create Date                     : 2006:04:19 16:56:07+09:00
Modify Date                     : 2006:05:18 12:26:15+09:00
Metadata Date                   : 2006:05:18 12:26:15+09:00
Creator Tool                    : Adobe InDesign CS2_J (4.0.2)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9231 bytes, use -b option to extract)
Instance ID                     : uuid:f56b96ec-cf79-11da-83a3-00145163edf6
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:62a2a509-d11b-11da-85f9-d5080e6c7aca
Derived From Instance ID        : 62a78c25-ca2c-11da-8032-a3eabc7940b4
Derived From Document ID        : adobe:docid:indd:942f0b7b-8e5f-11da-a127-fd652d5777bb
Format                          : application/pdf
Tagged PDF                      : Yes
Creator                         : Adobe InDesign CS2_J (4.0.2)

EXIF Metadata provided by EXIF.tools