JVC KENWOOD 417100 800 MHz Base Station/ Repeater User Manual Safety Instructions
JVC KENWOOD Corporation 800 MHz Base Station/ Repeater Users Manual Safety Instructions
Contents
- 1. Users Manual
- 2. Users Manual Safety Instructions
Users Manual Safety Instructions
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1376872 |
| Application ID | VrL5YmxXJZLhREdJLY6emQ== |
| Document Description | Users Manual Safety Instructions |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 2.42kB (30213 bits) |
| Date Submitted | 2010-11-16 00:00:00 |
| Date Available | 2010-11-16 00:00:00 |
| Creation Date | 2017-11-07 09:46:04 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-07 09:46:04 |
| Document Title | Users Manual Safety Instructions |
| Document Creator | Word 用 Acrobat PDFMaker 7.0.7 |
MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND USERS • Use only manufacturer or dealer supplied antenna. • Antenna Minimum Safe Distance: 30 cm (1 foot). • Antenna Gain: 0 dBd referenced to a dipole. The Federal Communications Commission has adopted a safety standard for human exposure to RF (Radio Frequency) energy which is below the OSHA (Occupational Safety and Health Act) limits. • Antenna Mounting: The antenna supplied by the manufacturer or radio dealer must not be mounted at a location such that during radio transmission, any person or persons can come closer than the above indicated minimum safe distance to the antenna, i.e. 30 cm (1 foot). • To comply with current FCC RF Exposure limits, the antenna must be installed at or exceeding the minimum safe distance shown above, and in accordance with the requirements of the antenna manufacturer or supplier. • Vehicle installation: The antenna can be mounted at the center of a vehicle metal roof or trunk lid, if the minimum safe distance is observed. • Base Station Installation: The antenna should be fixed-mounted on an outdoor permanent structure. RF Exposure compliance must be addressed at the time of installation. Antenna substitution: Do not substitute any antenna for the one supplied or recommended by the manufacturer or radio dealer. You may be exposing person or persons to excess radio frequency radiation. You may contact your radio dealer or the manufacturer for further instructions. Maintain a separation distance from the antenna to person(s) of at least 30 cm (1 foot). You, as the qualified end-user of this radio device must control the exposure conditions of bystanders to ensure the minimum separation distance (above) is maintained between the antenna and nearby persons for satisfying RF Exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work-related use, transmit only when person(s) are at least the minimum distance from the properly installed, externally mounted antenna. Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from the antenna/vehicle
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Comments : MPE_Mobile_Use_Infomation.pdf より Company : 株式会社 ケンウッド Create Date : 2010:09:07 13:56:17+09:00 Modify Date : 2010:11:16 13:04:55-05:00 Source Modified : D:20100903082809 Language : EN-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : Word 用 Acrobat PDFMaker 7.0.7 Metadata Date : 2010:11:16 13:04:55-05:00 Document ID : uuid:0af738cd-9d6d-4278-a878-e1192fc2eded Instance ID : uuid:d23df99c-2099-4637-8989-7fcf2ff5f08a Version ID : 3 Format : application/pdf Title : Creator : Headline : Page Layout : OneColumn Page Count : 1EXIF Metadata provided by EXIF.tools