JVC KENWOOD 463500 USB Programming Interface Cable User Manual KPG 36X KPG 46X

JVC KENWOOD Corporation USB Programming Interface Cable KPG 36X KPG 46X

Users Manual

Download: JVC KENWOOD 463500 USB Programming Interface Cable User Manual KPG 36X KPG 46X
Mirror Download [FCC.gov]JVC KENWOOD 463500 USB Programming Interface Cable User Manual KPG 36X KPG 46X
Document ID2484183
Application IDCH4p2FiIjXhW+JcRKHqZxA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize4.5kB (56220 bits)
Date Submitted2014-12-24 00:00:00
Date Available2014-12-29 00:00:00
Creation Date2014-11-20 17:58:28
Producing SoftwareAcrobat Distiller 10.1.12 (Windows)
Document Lastmod2014-12-15 19:28:34
Document TitleKPG-36X,KPG-46X
Document CreatorAdobe InDesign CS5.5_J (7.5.3)
Document Author: JVC KENWOOD

USB PROGRAMMING INTERFACE CABLE
KPG-36X
KPG-46X
INSTRUCTION MANUAL
SUPPLIED ITEMS
•
•
•
USB programming interface cable (USB 2.0 Full speed (12 Mb/s)
compliant) 
CD (with driver software)
Instruction manual (B5A-0568-XX)
© B5A-0568-00 (M)
♦ Do not connect the KPG-36X/ 46X other than PC (or USB HUB).
It causes malfunction of the KPG-36X/ 46X and the transceiver.
ABOUT SELECTING USB/ UART
OPERATING SYSTEM
For using USB (Up to 12 Mb/s USB Speed), Slide the SW of
KPG-36X/ 46X to USB.
For using UART (RS-232C), Slide the SW of KPG-36X/ 46X to
UART.
Windows Vista (32/ 64-bit)/ Windows 7 (32/ 64-bit)/ Windows 8
(32/ 64-bit)/ Windows 8.1 (32/ 64-bit)
CONFIRMING THE INSTALLATION
INSTALLING THE DRIVER
When using the KPG-36X/ 46X for the first time, install the
supplied KPG-36X/ 46X driver.
ATTENTION:
♦ For Fpro software, use version 6.00 or later.
♦ For KFL software, use version 1.10 or later.
♦ Depending on the usage condition of the USB apparatus, saved
content may be lost. KENWOOD does not take responsibility for
damages or lost content.
Turn on the computer, then insert the supplied CD into the
CD-ROM drive of the computer.
When using KPG-36X/ 46X for NX-5200/ NX-5300/
NX-5400/ NX-5700/ NX-5800, the USB driver whose
transfer rate is faster than the UART driver or the current
UART driver can be selected.
Refer to the service manual for other models, and if there are
not any specific descriptions, select UART driver.
If installing the UART driver:
Double-click the CP210xVCP folder .
Double-Click the [CP210xVCPInstaller_x64.exe] or
[CP210xVCPInstaller_x86.exe]file. When installation
Wizard starts, click [Next>].
If installing the USB driver:
Double click [Kenwood_Communications_Product_
USB_Port_Type1] folder. Double click the [Kenwood_
Type_1_USB_Driver_32bit.exe] or [Kenwood_Type_1_
USB_Driver_64bit.exe] file. When the Installation Wizard
starts, click [Next>] .
• Concerning the 64-bit version or 32-bit version, you
should check the PC in advance.
Read through the licensing agreement. If you consent to the
terms of the agreement, check the "I accept this agreement"
box, then click [Next>].
• Start the installation.
When the driver finishes copying to the computer, click the
[Finish].
Note:
♦ The KPG-36X/ 46X is installed as a virtual port driver.
♦ The KPG-36X/ 46X does not support programs other than those
used for KENWOOD transceivers.
♦ If the driver cannot be installed or if, having installed the driver
and restarted your computer, the driver cannot be found or the
operation does not stabilize, try changing the USB port to that
which you have connected the KPG-36X/ 46X. Additionally, try
removing other equipment attached to the computer USB ports.
♦ Access the following URL for the driver download information:
http://www.kenwood.com/usb-com/
CONNECTING TO A COMPUTER AND TRANSCEIVER
Connect one of the KPG-36X/ 46X USB connectors to the USB
port of the PC, and the other connector to the transceiver.
Note:
♦ Connect the KPG-36X/ 46X directly to the transceiver and the PC
(or USB HUB).
Connect the KPG-36X/ 46X to a USB port, In the
“Device Manager”, open the “Port(COM and LPT)”.
In case of the SW position of UART, If “Silicon Labs CP210x
USB to UART Bridge(COMx)” appears, installation is complete.
In case of the SW position of USB, “KENWOOD Type1(COMx)”
appears, installation is complete.
UNINSTALLING THE DRIVER
In the “Program Installation and Deletion” screen, uninstall the
following item:
“Windows Driver Package - Silicon Laboratories (silabenm)
Ports (mm/dd/yyyy x.x.x.x.)”
“Windows Driver Package - JVC KENWOOD Corporation Radio
USB Port Type 1 Driver (mm/dd/yyyy x.x.x.x.)”
COPYRIGHTS
•
•
Windows® and Windows Vista® are registered trademark of
Microsoft Corporation in the United States and/or other countries.
Other product and company names mentioned herein may be
the trademarks of their respective owners.
One or more of the following statements may be applicable to this equipment.
FCC WARNING
This equipment generates or uses radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the Instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can generate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by disconnecting and
then reconnecting the cable, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer for technical assistance.
Information on Disposal of Old Electrical and Electronic Equipment (applicable
for EU countries that have adopted separate waste collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a
facility capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources whilst
preventing detrimental effects on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery
contains lead.
Authorized Representative in Europe:
Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands
Manufacturer:
1-16-2 Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Author                          : JVC KENWOOD
Create Date                     : 2014:11:20 17:58:28+09:00
Modify Date                     : 2014:12:15 19:28:34+09:00
Subject                         : B5A-0568-00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : KPG-36X,KPG-46X
Creator                         : JVC KENWOOD
Description                     : B5A-0568-00
Creator Tool                    : Adobe InDesign CS5.5_J (7.5.3)
Metadata Date                   : 2014:12:15 19:28:34+09:00
Producer                        : Acrobat Distiller 10.1.12 (Windows)
Document ID                     : uuid:c57b676b-47a0-47d7-82bd-2221ce0f9aad
Instance ID                     : uuid:00944c4c-adbd-4632-8c6c-f6f6dd7e051a
PXC Viewer Info                 : PDF-XChange Viewer;2.5.309.0;Jul 28 2014;19:17:56;D:20141121162126+09'00'
Page Layout                     : SinglePage
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K44463500

Navigation menu