JVC KENWOOD 474701 900 MHz Digital Base Repeater User Manual NXR 5700 NXR 5800 NXR 5900 NXR 5901

JVC KENWOOD Corporation 900 MHz Digital Base Repeater NXR 5700 NXR 5800 NXR 5900 NXR 5901

Contents

Product Safety Manual

Download: JVC KENWOOD 474701 900 MHz Digital Base Repeater User Manual NXR 5700 NXR 5800 NXR 5900 NXR 5901
Mirror Download [FCC.gov]JVC KENWOOD 474701 900 MHz Digital Base Repeater User Manual NXR 5700 NXR 5800 NXR 5900 NXR 5901
Document ID3597568
Application IDnZxshu1L0WnLbqwRikVTng==
Document DescriptionProduct Safety Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize9.15kB (114317 bits)
Date Submitted2017-10-10 00:00:00
Date Available2017-10-18 00:00:00
Creation Date2017-10-05 14:20:59
Producing SoftwareiTextSharp™ 5.5.8 ©2000-2015 iText Group NV (AGPL-version); modified using iTextSharp™ 5.5.8 ©2000-2015 iText Group NV (AGPL-version)
Document Lastmod2017-10-05 18:55:11
Document TitleNXR-5700,NXR-5800,NXR-5900,NXR-5901
Document CreatorAdobe InDesign CS5.5_J (7.5)
Document Author: JVC KENWOOD Corporation

MANDATORY SAFETY INSTRUCTIONS TO INSTALLERS AND
USERS
• Use only manufacturer or dealer supplied antenna.
• Antenna Minimum Safe Distance: Refer to the values in the table
below.
• Antenna Gain:  0 dBd referenced to a dipole.
The Federal Communications Commission has adopted a safety standard
for human exposure to RF (Radio Frequency) energy which is below the
OSHA (Occupational Safety and Health Act) limits.
• Antenna Mounting:  The antenna supplied by the manufacturer or
radio dealer must not be mounted at a location such that during
radio transmission, any person or persons can come closer than the
minimum safe distance indicated in the table below.
• To comply with current FCC/ ISED RF Exposure limits, the antenna
must be installed at or exceeding the minimum safe distance shown
above, and in accordance with the requirements of the antenna
manufacturer or supplier.
• Vehicle installation:  The antenna can be mounted at the center
of a vehicle metal roof or trunk lid, if the minimum safe distance is
observed.
• Base Station Installation:  The antenna should be fixed-mounted on
an outdoor permanent structure.  RF Exposure compliance must be
addressed at the time of installation.
Antenna substitution:  Do not substitute any antenna for the one supplied
or recommended by the manufacturer or radio dealer.
You may be exposing person or persons to excess radio frequency
radiation. You may contact your radio dealer or the manufacturer for further
instructions.
Maintain a separation distance from the antenna to person(s) of at least
the distance indicated in the table below.
You, as the qualified end-user of this radio device must control the
exposure conditions of bystanders to ensure the minimum separation
distance (table below) is maintained between the antenna and nearby
persons for satisfying RF Exposure compliance.  The operation of this
transmitter must satisfy the requirements of Occupational/Controlled
Exposure Environment, for work-related use, transmit only when person(s)
are at least the minimum distance from the properly installed, externally
mounted antenna.  Transmit only when people outside the vehicle are at
least the recommended minimum lateral distance away from the antenna/
vehicle.
Antenna Minimum Safe Distance
NXR-5700-K/ NXR-5800-K3
180 cm (6 feet)
NXR-5800-K
120 cm (4 feet)
NXR-5900-K/ NXR-5901-K
20 cm (8 inches)
TERMINAL DESCRIPTION
Access the following URL for the terminal description.
http://manual.kenwood.com/files/B5K-0197-00.pdf
© 2017

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : JVC KENWOOD Corporation
Create Date                     : 2017:10:05 14:20:59+09:00
Modify Date                     : 2017:10:05 18:55:11+09:00
Subject                         : B5A-2265-00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : JVC KENWOOD Corporation
Description                     : B5A-2265-00
Title                           : NXR-5700,NXR-5800,NXR-5900,NXR-5901
Creator Tool                    : Adobe InDesign CS5.5_J (7.5)
Metadata Date                   : 2017:10:05 18:55:11+09:00
Keywords                        : 
Producer                        : iTextSharp™ 5.5.8 ©2000-2015 iText Group NV (AGPL-version); modified using iTextSharp™ 5.5.8 ©2000-2015 iText Group NV (AGPL-version)
Document ID                     : uuid:2c37bdc2-d046-412d-8969-0e7bdb282411
Instance ID                     : uuid:73306f23-cd12-4d13-9c63-96ba8bbbb268
Page Count                      : 1
EXIF Metadata provided by EXIF.tools
FCC ID Filing: K44474701

Navigation menu