JVCKENWOOD K9X004 Card Printer w/Built-in RFID Unit User Manual ReadMeFirst Memo indd

JVC KENWOOD Corporation Card Printer w/Built-in RFID Unit ReadMeFirst Memo indd

Contents

User manual 3 of 3

R ead before operating your printer in order to use the unit properly. Once you start using the unit, this manual should be put aside the unit, or at a convenient place where you can look up the manual any time as you need.R E AD ME F IR S TC aution: C hanges or modifications not approved by party res pons ible for compliance could void user's authority to operate the equipment. C aution: Use a s hield cable for the ethernet cable. F or a C las s A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:Note: This equipment has been tested and found to comply with the limits for a C las s A digital device, pursuant to part15 of the FC C R ules . T hese limits are designed to provide reas onable protection against harmful interference when theequipment is operated in a commercial environment. This equipment generates , uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area is likely to cause harmful interference in which casethe us er will be required to correct the interference at his own expens e. Information for US AInformation for C anadaOperation is s ubject to the following two c onditions :(1) this device may not cause interference, and (2) this device must accept any interference, includinginterference that may cause undes ired operation of the device. Information for E UMac hine nois eS ound power level: less than 70dB(A) according to DIN45635 part 19 (E N27779).The measurements are to be made according to DIN45635 part 2019 or E N27779, respectively. C ard PrinterLS T1013-000AS -1This C lass A digital apparatus complies with C anadian IC E S-003C et appareil numerique de la clas se A es t conforme a la norme NMB - 003 du C anada.``
S-2Do not use the printer when cards are jammed inside.Cards may not be discharged correctly such as whenthe retransfer setting for the card is inappropriate.Stop using and remove the jammed cards immediately. Otherwise, you may have problems removing the cards,and fire or electric shock may also occur as a result.Safety Precautions
S-3
Precautions on retransfer fi lms/ink ribbons/cardsPay careful attention of the following when handling a printing media (retransfer fi lm or ink ribbon) or card.Using a deformed or scratched card may cause card feed errors.Touching the printing surface of the printing media or card directly with your hand may cause the print to turn out uneven. Foreign particles attached to the printed areas may result in printing voids. Attach the printing media or card in a clean environment. Use of electrically-charged printing media or cards may cause printing errors. Do not allow static to occur, such as due to cards rubbing against each other.When replacing or replenishing a printing media or card that is stored under a low temperature, use after leaving the media or card at the operating ambient temperature of the printer for at least one hour. Otherwise, condensation may occur, causing printing errors or malfunction of the printer.•••••Handling instructions■The storage conditions of the printing media (retransfer fi lm or ink ribbon) and card have a signifi cant effect on the printing quality. Store the printing media or card in one of the following locations.Storage environmentTemperature: 5 ˚C to 25 ˚CRelative humidity: 40 % to 60 %Storage locationDo not store the printing media or card in the follow-ing locations. Doing so may cause the media or card to deteriorate.Places exposed to direct sunlight.Places with a high temperature or humidity.Places near organic solvents or diazo copiers.Storage periodUse the printing media (retransfer fi lm or ink ribbon) within half a year after purchase. For details on the cards, please consult our authorized dealers.■••■•••■Storage instructions■We do not provide compensation for any malfunction during card printing caused by breakdown of the machine, ink ribbon defects or card characteristics. In addition, we also do not provide compensation for insuffi cient print quality as a general rule. Please evaluate carefully beforehand.Card MaterialSome card material may not be suitable for printing. Using a contact-type IC card other than those specifi ed by the dealer, may cause damage to the thermal head. No compensation is made for the life reduction and fail-ures that were caused by unsuitable card material. Warp of card or uneven thickness of IC cards, even though they are within the tolerance of JIS or ISO standards, may not be suitable for printing or feeding. For details on the specifi cations about card material or others, consult the dealer in advanceVersion upgradeThe following defects may occur as a result of the version upgrade for the fi rmware of the printer or for the printer driver.Card printing is disabled for the application software that has been used.The operation of the printer or application software becomes unstable.Defects in print result occurs.Print color or shade differs.The performance of reproducing fi ne letters, chang-es.OthersBe sure to retain a copy of the current version when performing version upgrade. Reinstall the previous version immediately if these problems occur. We are not liable for any damage such as defective cards or interruptions during printing as a result of the version up grade.■■■••••••Before useEscape ClauseD-1
Put on the supplied gloves when handling the retransfer fi lm/ink ribbon. Direct contact of your hand with the printing surface may result in printing errors. When retransfer fi lm/ink ribbon is dismantledWinding misalignment may occur. If an improperly wound retransfer fi lm/ink ribbon is installed, color drift or errors may occur.When attaching the retransfer fi lm/ink ribbonUse your hands to adjust the media at the supply and take-up sides so that they are parallel to each other. When doing so, make sure you do not touch the printing surface.Refer to the label adhered to the cassette for alignment of the screen position. Printing errors may occur if the position is not properly aligned.■•■••Avoid storing cards at places that are exposed to direct sunlight or subject to high temperatures and humidity. Discoloration or fading may occur if a card comes into contact with the following chemicals or stationery.Organic solvents, including alcohol, fi lm cleaner, or diazo copies.Files, document cases, pass holders, or erasers made of fl exible polyvinyl chloride.Hair wax or cosmetic products.•••Handling and storage of cards after printing■Card types■Thin cards and certain card materials may not be suitable for printing using this printer. For details on the card mate-rial to use and other specifi cations, please consult our authorized dealers in advance.Note:Improper alteration of the card’s thickness may result in printing errors or malfunction of the printer.•Cards may not be discharged correctly such as when the retransfer setting for the card is inappropriate. Stop using and remove the jammed cards immediately. Otherwise, you may have problems removing the cards, and fi re or electric shock may also occur as a result. When a card jam occurs, make use of the jog dial to remove the jam.If the card cannot be removed, consult a servicing personnel or our authorized dealers.••Winding misalignmentAdjust the position with your hands so that the media position is parallelat the take-up and supply sidesPrecautions on retransfer fi lms/ink ribbonsIn case of disposal this unit, take care for compliance with the local law and regulations in your country.In case of disposalPrecautions on cardsWhen a card is jammed inside the printer■U-1
M-1MEMO
M-2MEMO
M-3MEMO

Navigation menu