JVCKENWOOD K9X004 Card Printer w/Built-in RFID Unit User Manual ReadMeFirst Memo indd

Download:
Mirror Download [FCC.gov]
Document ID	1189358
Application ID	2Gmxej/IjCi/pq3xR1PaNg==
Document Description	User manual 3 of 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.43kB (1005366 bits)
Date Submitted	2009-10-27 00:00:00
Date Available	2009-10-27 00:00:00
Creation Date	2009-09-17 13:00:15
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2009-09-30 11:59:07
Document Title	ReadMeFirst_Memo.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	sgwork_00

R E A D ME F IR S T
C ard P rinter
LS T 1013-0 00A
R ead before operating your printer in order to us e the unit properly. Once you s tart us ing the unit, this manual
s hould be put as ide the unit, or at a convenient place where you can look up the manual any time as you need.
Information for US A
F or a C las s A digital device or peripheral, the ins tructions furnis hed the us er s hall include the following or s imilar
s tatement, placed in a prominent location in the text of the manual:
Note: T his equipment has been tes ted and found to comply with the limits for a C las s A digital device, purs uant to part
15 of the F C C R ules . T hes e limits are des igned to provide reas onable protection agains t harmful interference when the
equipment is operated in a commercial environment. T his equipment generates , us es , and can radiate radio frequency
energy and, if not ins talled and us ed in accordance with the ins truction manual, may caus e harmful interference to radio
communications . Operation of this equipment in a res idential area is likely to caus e harmful interference in which cas e
the us er will be required to correct the interference at his own expens e.
C aution: C hanges or modifications not approved by party res pons ible for compliance could void us er's authority
to operate the equipment.
C aution: Us e a s hield cable for the ethernet cable.
Information for C anada
Operation is s ubjec t to the following two c onditions :
(1) this device may not caus e interference, and (2) this device mus t accept any interference, including
interference that may caus e undes ired operation of the device.
T his C las s A digital apparatus complies with C anadian IC E S- 003
C et appareil numerique
de la clas s e A es t conforme a` la norme NMB - 003 du C anada.
Information for E U
Mac hine nois e
S ound power level: les s than 70dB (A) according to DIN45635 part 19 (E N27779).
T he meas urements are to be made according to DIN45635 part 2019 or E N27779, res pectively.
S -1
Safety Precautions
Do not use the printer when cards are jammed inside.
Cards may not be discharged correctly such as when
the retransfer setting for the card is inappropriate.
Stop using and remove the jammed cards immediately.
Otherwise, you may have problems removing the cards,
and fire or electric shock may also occur as a result.
S-2
S-3
Escape Clause
■ We do not provide compensation for any
malfunction during card printing caused by
breakdown of the machine, ink ribbon defects
or card characteristics. In addition, we also
do not provide compensation for insufficient
print quality as a general rule. Please evaluate
carefully beforehand.
■ Card Material
Some card material may not be suitable for printing.
Using a contact-type IC card other than those specified
by the dealer, may cause damage to the thermal head.
No compensation is made for the life reduction and failures that were caused by unsuitable card material. Warp
of card or uneven thickness of IC cards, even though
they are within the tolerance of JIS or ISO standards,
may not be suitable for printing or feeding. For details on
the specifications about card material or others, consult
the dealer in advance
■ Version upgrade
The following defects may occur as a result of the version
upgrade for the firmware of the printer or for the printer
driver.
• Card printing is disabled for the application software
that has been used.
• The operation of the printer or application software
becomes unstable.
• Defects in print result occurs.
• Print color or shade differs.
• The performance of reproducing fine letters, changes.
• Others
Be sure to retain a copy of the current version when
performing version upgrade. Reinstall the previous
version immediately if these problems occur. We are not
liable for any damage such as defective cards or
interruptions during printing as a result of the version up
grade.
Before use
Precautions on retransfer films/ink ribbons/cards
■ Handling instructions
Pay careful attention of the following when handling a
printing media (retransfer film or ink ribbon) or card.
• Using a deformed or scratched card may cause
card feed errors.
• Touching the printing surface of the printing media
or card directly with your hand may cause the print
to turn out uneven.
• Foreign particles attached to the printed areas may
result in printing voids. Attach the printing media or
card in a clean environment.
• Use of electrically-charged printing media or cards
may cause printing errors. Do not allow static to
occur, such as due to cards rubbing against each
other.
• When replacing or replenishing a printing media or
card that is stored under a low temperature, use
after leaving the media or card at the operating
ambient temperature of the printer for at least one
hour. Otherwise, condensation may occur, causing
printing errors or malfunction of the printer.
■ Storage instructions
The storage conditions of the printing media (retransfer
film or ink ribbon) and card have a significant effect on
the printing quality. Store the printing media or card in
one of the following locations.
■ Storage environment
• Temperature: 5 ˚C to 25 ˚C
• Relative humidity: 40 % to 60 %
■ Storage location
Do not store the printing media or card in the following locations. Doing so may cause the media or card to
deteriorate.
• Places exposed to direct sunlight.
• Places with a high temperature or humidity.
• Places near organic solvents or diazo copiers.
■ Storage period
Use the printing media (retransfer film or ink ribbon)
within half a year after purchase. For details on the cards,
please consult our authorized dealers.
D-1
Precautions on retransfer films/ink ribbons
Put on the supplied gloves when handling the retransfer
film/ink ribbon. Direct contact of your hand with the
printing surface may result in printing errors.
■ When retransfer film/ink ribbon is dismantled
• Winding misalignment may occur. If an improperly
wound retransfer film/ink ribbon is installed, color
drift or errors may occur.
■ When attaching the retransfer film/ink ribbon
• Use your hands to adjust the media at the supply
and take-up sides so that they are parallel to each
other. When doing so, make sure you do not touch
the printing surface.
• Refer to the label adhered to the cassette for
alignment of the screen position. Printing errors may
occur if the position is not properly aligned.
■ When a card is jammed inside the printer
Cards may not be discharged correctly such as when the
retransfer setting for the card is inappropriate. Stop using
and remove the jammed cards immediately. Otherwise,
you may have problems removing the cards, and fire or
electric shock may also occur as a result.
• When a card jam occurs, make use of the jog dial to
remove the jam.
• If the card cannot be removed, consult a servicing
personnel or our authorized dealers.
In case of disposal
In case of disposal this unit, take care for compliance with
the local law and regulations in your country.
Winding misalignment
Adjust the position with your hands
so that the media position is parallel
at the take-up and supply sides
Precautions on cards
■ Handling and storage of cards after printing
Avoid storing cards at places that are exposed to direct
sunlight or subject to high temperatures and humidity.
Discoloration or fading may occur if a card comes into
contact with the following chemicals or stationery.
• Organic solvents, including alcohol, film cleaner, or
diazo copies.
• Files, document cases, pass holders, or erasers
made of flexible polyvinyl chloride.
• Hair wax or cosmetic products.
■ Card types
Thin cards and certain card materials may not be suitable
for printing using this printer. For details on the card material to use and other specifi cations, please consult our
authorized dealers in advance.
Note:
• Improper alteration of the card’s thickness may result
in printing errors or malfunction of the printer.
U-1
MEMO
M-1
MEMO
M-2
MEMO
M-3

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 8
Creator Version                 : 10
Container Version               : 9
For                             : hayase, JVC
Create Date                     : 9/29/2009 7:00 PM
Bounding Box                    : 19 19 689 936
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:266e3c0a-99d4-4cad-88f0-7ab953f30a68
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:09:30 11:59:07+09:00
Metadata Date                   : 2009:09:30 11:59:07+09:00
Document ID                     : uuid:8a5c66cf-2f40-423b-829a-fa2551d826bf
Format                          : application/pdf
Title                           : ReadMeFirst_Memo.indd
Creator                         : sgwork_00
Author                          : sgwork_00
Image Height                    : 917
Image Width                     : 670
Image Size                      : 670x917
Megapixels                      : 0.614

EXIF Metadata provided by EXIF.tools