JVC KD X50BTUN X50BT User Manual GET0785 004A

KD-X50BTUN KD-X50BTUN (Asia) GET0785-004A

User Manual: JVC KD-X50BTUN KD-X50BTUN English, Indonesian,

Open the PDF directly: View PDF .
Page Count: 54

Download
Open PDF In Browser	View PDF

ENGLISH
INDONESIA

[TIPE]

KD-X50BT
[TAPE MOBIL]

DIGITAL MEDIA RECEIVER /
PENERIMA MEDIA DIGITAL

For canceling the display demonstration, see page 3. /
Untuk membatalkan tampilan demonstrasi, lihat halaman 3.
For installation and connections, refer to the separate manual.
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.

INSTRUCTIONS
BUKU PETUNJUK
GET0785-004A
[UN]

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.

How to reset your unit
[European Union only]

Your preset adjustments will
also be erased.

Warning:
Stop the car before operating the unit.

Maintenance

Caution:
Adjust the volume so that you can hear sounds
outside the car. Driving with the volume too high
may cause an accident.
Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.

Cleaning the unit
Wipe off the dirt on the panel with a dry silicon or
soft cloth. Failure to observe this precaution may
result in damage to the unit.

How to read this manual:

Caution on volume setting:
Digital devices (USB) produce very little noise
compared with other sources. Lower the volume
before playing these digital sources to avoid
damaging the speakers by the sudden increase of
the output level.

Temperature inside the car:

This manual mainly explains operations using
the buttons on the control panel.
< > indicates the displays on the control
panel.
[XX] indicates the initial setting of a menu
item.

If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.

|‫ޓ‬ENGLISH

KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Contents
Preparation ............................................................ 3

Bluetooth姞 connection ..................................... 11

Canceling the display demonstration

Bluetooth mobile phone ................................ 13

Setting the clock

Bluetooth audio player ................................... 17

Basic operations ................................................... 4

Illumination color adjustments .................... 18

Remote controller .................................................. 5

Brightness adjustments .................................. 19

Radio ........................................................................ 6

Sound adjustments .......................................... 19

USB ............................................................................ 8

Menu operations ............................................... 20

iPod/iPhone ............................................................. 9

Additional information ................................... 23

Quick Search ....................................................... 10

Troubleshooting ................................................ 25

External components ...................................... 10

Specifications ..................................................... 27

Preparation
Canceling the display
demonstration
The display demonstration is always turned on
unless you cancel it.

Setting the clock
1

(Hold)

2 Select .

(Hold)

3 Select .
(Initial setting)

3 Select .

4 Adjust the hour.

4 Press MENU to exit.
5 Adjust the minute.

6 Press MENU to exit.

ENGLISH‫ |ޓ‬3
KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Basic
operations
Basic operations
Control panel

Remote controller
Display window

AUX input jack
Control dial
USB input terminal
Remote sensor
Aim the remote controller directly at the sensor.
DO NOT expose to bright sunlight.

When you press or hold the following button(s)...
Control panel

/SOURCE

Control dial
(turn)
Control dial
(press)
EQ

Remote
controller
—
SOURCE
VOL - / +
—

)
—
SOUND
—

—

General function
Turns on.
Turns off. (Hold)
Press the /SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
Press repeatedly to select the source.
Adjusts the volume level.
Selects items.
Mutes the sound or pauses playback.
Press the button again to cancel muting or resume
playback.
Confirms selection.
Selects the preset sound mode. (' page 19)
Enters “Hands-Free” menu (' page 14), or answers
incoming call when the unit rings.
Ends a call. (Hold)
Returns to the previous menu.
Selects a preset station. (' page 6)
Selects MP3/WMA folder. (' page 8)
Searches for a station automatically. (' page 6)
Searches for a station manually. (Hold)
Selects track. (' page 8, 9, 17)
Fast-forwards or reverses track. (Hold)

|‫ޓ‬ENGLISH

KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Basic operations
Display information
Changes the display information. (Press)
Scrolls the current display information. (Hold)
Source
Radio
USB/Bluetooth Audio
iPod/iPhone (HEAD MODE/
IPOD MODE)
iPod/iPhone (APP MODE)
External Components (AUX)

Display
Station name* - Frequency - Clock - (back to the beginning)
Album title/Artist - Track title - Track no./Playing time Track no./Clock - (back to the beginning)
APP MODE) APP/Clock
AUX IN) Clock

* “NO NAME” appears if no name is assigned to the station.

Remote controller
Warning:

Preparing
When you use the remote controller for the first
time, pull out the insulation sheet.

Insulation sheet

Replacing the lithium coin
battery

If the effectiveness of the remote controller
decreases, replace the battery.

CR2025

Caution:

Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Battery shall not be exposed to excessive heat
such as sunshine, fire, or the like.

Do not install any battery other than CR2025 or
its equivalent.
Do not leave the remote controller in places
(such as dashboards) exposed to direct
sunlight for a long time.
Store the battery in places out of reach of
children.
Do not recharge, short, disassemble, heat the
battery, or dispose of it in a fire.
Do not place the battery with other metallic
materials.
Do not poke the battery with tweezers or
similar tools.
Insulate the battery by wrapping it with tape
when disposing or storing it.

This unit is equipped with the steering wheel
remote control function. For details, refer also to
the instructions supplied with the remote
adapter.

ENGLISH‫ |ޓ‬5
KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Radio
Radio
Searching for a station
A

Select or .
Auto search. (Press)
Manual search. (Hold)
“M” flashes, then press the button repeatedly.

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Auto presetting (FM only)

Storing stations in memory
Manual presetting
You can preset up to 18 stations for FM and 6
stations for AM.

SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.

(Hold)

While listening to a station...

(Hold)

“PRESET MODE” flashes.

2 Select preset number.

The preset number flashes and “MEMORY”
appears.

-
-
-
“SSM” flashes. When all the stations are stored,
“SSM” stops flashing.
To preset /,
repeat steps 1 and 2.

Selecting a preset station

You can also select a preset station using / .

|‫ޓ‬ENGLISH

KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Radio

Setting the Radio Timer
You can tune in to a preset station at a specific
time regardless of the current source.

(Hold)

[OFF]

Naming the stations
You can assign names for up to 30 station
frequencies (FM and AM) using a maximum of 8
characters for each name.

1 Select or .

-
-
-//

Cancels Radio Timer.

ONCE

Activates once.

DAILY

Activates daily.

2 Enter “Name Entry” menu.

(Hold)
(Hold)
3 Enter the desired name.
Select
Move

3 Select the preset station.
-/
-<01> ... <18> for FM/
<01> ... <06> for AM

4 Set the activation time..

Select the desired character (A to Z, 0 to 9, —, /, <,
>) or a space, then move to the next (or previous)
character position.
Repeat step 3 until you have finished entering the
name.

4 Press the control dial to confirm.
5 Press MENU to exit.

lights up after the Radio Timer has been set.
Only one timer can be set. Setting a new timer
will override the previous setting.
The Radio Timer will not activate if the unit is
turned off or if is set to after
selecting an AM station for the timer.

If you try to assign names to more than 30
station frequencies, “NAME FULL” appears.
Delete unwanted names before assignment.

To erase the entire name, press and hold DISP
after step 2, then press the control dial.

ENGLISH‫ |ޓ‬7
KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

USB
USB
Playing a USB device
USB input terminal
USB 2.0 cable
(not supplied)
or
USB cable from the rear of the unit
The source changes to “USB” and playback starts.

This unit can play MP3/WMA/WAV files stored in USB mass storage device (such as a USB memory
and Digital Audio Player).
Make sure all important data has been backed up. We shall bear no responsibility for any loss of data
in USB mass storage class device while using this system.

Selecting a folder/track
Selects folder.

Selecting the playback modes
You can select one of the following playback
modes at a time.

Selects track. (Press)
Fast-forwards or reverses
the track. (Hold)

Selecting a track/folder from
the list
1
2 Select a folder.

3 Select a track.

If the USB device contains many folders or tracks,
you can fast search for desired folder or track by
turning the control dial quickly, or use Quick
Search. (' page 10)

(Hold)

REPEAT
RPT OFF

Cancels repeat playback.

TRACK RPT

Repeats current track.

FOLDER RPT

Repeats current folder.

RANDOM
RND OFF

Cancels random playback.

FOLDER RND

Randomly plays all tracks of
current folder, then tracks of
next folders.

ALL RND

Randomly plays all tracks.

|‫ޓ‬ENGLISH

KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

iPod/iPhone
Playing an iPod/iPhone

3 Select the desired track.

USB input terminal
USB 2.0 cable (accessory
of the iPod/iPhone)
or

Repeat this step until the desired track is selected.
If the selected menu contains many tracks, you
can fast search for the desired track by turning
the control dial quickly, or use Quick Search
(' page 10).

USB cable from the
rear of the unit
The source changes to “IPOD-FRONT/IPOD-REAR”
and playback starts.

Selecting the control mode
(Hold)
#//
HEAD
Controls iPod playback through this
MODE unit.
IPOD
Controls iPod playback from the
MODE iPod/iPhone.
APP
The sound of any functions (music,
MODE games, applications, etc.) running on
the connected iPod/iPhone is
emitted through the speakers
connected to this unit.
You can also change the setting using in the menu. (' page 22)

Selecting a track
Applicable under
only.
For , applicable only for some audio
applications.
Selects track/chapter.
(Press)
Fast-forwards or reverses
the track. (Hold)

Selecting a track from the list
Applicable under only.

2 Select the desired list.

Selecting the playback modes
Applicable under only.
You can select one of the following playback
modes at a time.

(Hold)

2
#)

REPEAT
RPT OFF
ONE RPT
ALL RPT

Cancels repeat playback.
Functions the same as “Repeat
One” of the iPod.
Functions the same as “Repeat
All” of the iPod.

RANDOM
RND OFF
Cancels random playback.
Functions the same as “Shuffle
SONG RND
Songs” of the iPod.
Functions the same as “Shuffle
ALBUM RND
Albums” of the iPod.

“ALBUM RND” is not applicable for some iPod/
iPhone.

iPod/iPhone application
You can operate JVC original application with this
unit in . For more details, visit JVC
website: (English website only).

PLAYLISTS)ARTISTS)ALBUMS)SONGS)
PODCASTS)GENRES)COMPOSERS)
AUDIOBOOKS) (back to the beginning)
ENGLISH‫ |ޓ‬9
KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Quick
Search
Quick Search
If you have many folders/tracks/contacts, you can search through them quickly according to the first
character (A to Z, 0 to 9 and OTHERS).

1 Enter list menu or “Hands-Free” menu.
USB (MP3/WMA/WAV)

iPod/iPhone

Bluetooth phonebook

Select the desired list.

Select .

2 Select the desired character (A to Z, 0 to 9
and OTHERS).

3 Select your desired folder/track/contact.

For USB and iPod/iPhone, repeat step 3 until the
desired track is selected.
Searching may not work on some of the layers
of the selected menu (for iPod/iPhone).
“OTHERS” appears if the first character is not A to
Z or 0 to 9, such as #, -, !, etc.

External components
You can connect an external component to the AUX (auxiliary) input jack on the control panel.
For details, refer also to the instructions supplied with the external components.

Playing an external component
from AUX
3.5 mm stereo mini plug
(not supplied)

1 Connect to AUX on the control panel.
2 Select .

3 Turn on the connected component and
start playing the source.

Portable audio
player, etc.
Use a 3-terminal plug head
stereo mini plug for optimum
audio output.

10 |‫ޓ‬ENGLISH
KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Bluetooth姞 connection

iPod/iPhone

By connecting the supplied KS-UBT1 USB Bluetooth Adapter and microphone to this unit, you can
operate a Bluetooth device using this unit. Refer to the “Installation/Connection Manual” for details on
connecting the microphone.
Once the USB Bluetooth Adapter is attached, this unit is always
available for pairing.
Refer also to the instructions supplied with the Bluetooth
device.
Refer to the separate appendix to check the countries where
Microphone
KS-UBT1
you may use the Bluetooth function.
If you turn off the unit or unplug the USB Bluetooth Adapter during a phone call conversation, the
Bluetooth connection is disconnected. Continue the conversation using your mobile phone.
This unit supports the following Bluetooth profiles
Hands-Free Profile (HFP 1.5)
Object Push Profile (OPP 1.1)
Phonebook Access Profile (PBAP 1.0)
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.3)

Warning:
Stop the car in a safe place before operating complicated steps such as dialing numbers, using
phonebook, etc.

Pairing a Bluetooth device
When connecting a Bluetooth device to the unit for the first time, perform pairing between the unit and
the device.
Up to five Bluetooth devices can be registered in this unit.
A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any
time.
This unit supports Secure Simple Pairing (SSP).

1 Connect the USB Bluetooth adapter
(KS-UBT1) to one of the USB input
terminals.

USB input terminal

KS-UBT1

USB cable from the
rear of the unit
2 Search and select “JVC Unit” on the Bluetooth device.
“BT PAIRING” flashes on the display.
For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code
immediately after searching.

ENGLISH‫ |ޓ‬11
KD-X50BT_UN_EN

2011/11/22‫ޓ‬20:14:54

Bluetooth姞 connection
3 Perform (A) or (B) depending on what scrolls on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below
(A) If “[Device Name]”#“XXXXXX”#
(B) If “[Device Name]”#“VOL – YES”#
“BACK – NO” scrolls on the display,
“VOL – YES”#“BACK – NO” scrolls on the
display,
Select “YES” to start the pairing.
“XXXXXX” is a 6-digit passkey randomly
generated during each pairing.

Ensure that the passkey which appears
on the unit and Bluetooth device is the
same.
Select “YES” to confirm the passkey.

(1) If “PAIRING”#“PIN 0000” scrolls on the
display, enter the PIN code “0000” into the
Bluetooth device.

You can change to a desired PIN code before
pairing. (' page 22)

(2) If only “PAIRING” appears, operate the
Bluetooth device to confirm pairing.

Operate the Bluetooth device to confirm
the passkey.

After pairing is successful, “PAIRING COMPLETED” appears on the display.
The unit will establish a connection with the newly paired Bluetooth device, “” lights up on the
display and you can now control the Bluetooth device through the unit.

“” will light up when a phone is connected.
“” will light up when an audio device is connected.
Once the connection is established, the device is registered to the unit and there is no need to
perform the pairing again unless you delete the registered device.
Some Bluetooth devices may not be able to connect to the unit after pairing. Connect the device to
the unit manually. Refer to the instruction manual of the Bluetooth device for more information.

Connecting/Disconnecting a registered device manually
To connect
1

To disconnect
1

(Hold)

2 Select .
-
-/

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
GTS PDFX Conformance            : PDF/X-1a:2001
Modify Date                     : 2011:11:23 19:24:49+08:00
GTS PDFX Version                : PDF/X-1:2001
Create Date                     : 2011:11:22 21:58:02+08:00
Subject                         : GET0785-004A
Page Count                      : 54
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Trapped                         : False
Creation Date                   : 2011:11:22 21:58:02+08:00
Mod Date                        : 2011:11:23 19:24:49+08:00
Author                          : JVC
Metadata Date                   : 2011:11:23 19:24:49+08:00
Creator Tool                    : Adobe Acrobat 7.0
Document ID                     : uuid:5078E0F21115E111AC70FCFA6CFBA77A
Instance ID                     : uuid:5078E0F21115E111AC70FCFA6CFBA77A
Derived From                    : 
Format                          : application/postscript
Title                           : KD-X50BT
Description                     : GET0785-004A
Creator                         : JVC
Page Layout                     : SinglePage

EXIF Metadata provided by EXIF.tools

JVC KD X50BTUN X50BT User Manual GET0785 004A

KD-X50BTUN KD-X50BTUN (Asia) GET0785-004A

Navigation menu

Versions of this User Manual:

Views

Navigation