JVC LT 32DA1BJ User Manual 50158524 EN

User Manual: JVC LT-32DA1BJ LT-32DA1BJ English,

Open the PDF directly: View PDF PDF.
Page Count: 52

INSTRUCTIONS
ENGLISH
LT-32DA1BJ
©2009 Victor Company of Japan, Limited 1109TMH-VT-VT
50156584
WIDE LCD PANEL TV
If something doesn't seem to work
If there is something about your appliance which you do
not understand and you live in the UK you can
Phone our help line during normal office hours on:
0844 8009595
Calls are charged at standard rates.
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may occur
as a result of product improvement and development.
Kesa U.K HU1 3AU 29 / 04 / 2008
䄰た䍏噅剟孇䉝当卍彍䈳㕟㌲㠸㉗弨前ⵃ㈵〳ⴱ䍟啋⥟䥄呖彂剏乚䔴弱〰㘴㘷㕟㔰ㄵ㠵㈴
ㄶ⁋慳ﵭ′〰㤠偡穡牴敳椠〹㨲㐺㌸
English - 1 -
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Information for Users on Disposal of Old Equipment and Batteries
[European Union]
These symbols indicate that the electrical and electronic equipment and the
battery with this symbol should not be disposed of as general household waste
at its end-of-life. Instead, the products should be handed over to the applicable
collection points for the recycling of electrical and electronic equipment as well
as batteries for proper treatment, recovery and recycling in accordance with your
national legislation and the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to conserve natural resources
and will help to prevent potential negative effects on the environment and human
health which could otherwise be caused by inappropriate waste handling of these
products.
For more information about collection points and recycling of these products,
please contact your local municipal offi ce, your household waste disposal service
or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance
with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page http://www.comet.
co.uk to obtain information about the take-back of the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance with applicable
national legislation or other rules in your country for the treatment of old electrical
and electronic equipment and batteries.
Products
Battery
Logo & License
HDMI, the HDMI Logo and High-Defi nition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
DVB is a registered trademark of the DVB Project
Notice:
The sign Pb below
the symbol for
batteries indicates
that this battery
contains lead.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 1A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 1 01.12.2009 15:06:0101.12.2009 15:06:01
English - 2 -
Contents
Initial Settings ....................................................... 20
General Operation ................................................ 21
Information Banner ........................................... 21
Electronic Programme Guide (EPG) .................... 21
Displaying Subtitles .......................................... 22
Digital Teletext (** for UK only) ......................... 22
Analogue Teletext ............................................. 22
Widescreen ....................................................... 22
IDTV Menu System .............................................. 23
Channel List ...................................................... 23
Navigating the Entire Channel List ............... 23
Moving the channels in the channel list ........ 23
Deleting the Channels in the Channel List .... 23
Renaming Channels ..................................... 24
Adding Locks to Channels ............................ 24
Setting Favourites ......................................... 24
Program Guide ............................................. 25
Timers ............................................................... 25
Conditional Access ........................................... 25
TV Setup ........................................................... 26
Setup ................................................................ 26
Confi guration ................................................ 26
Time Settings (**) .......................................... 28
Audio Description .......................................... 28
Standby Search (*) ....................................... 29
Language ...................................................... 29
Installation ..................................................... 29
Navigating the Analogue TV Menu System .......... 31
Analogue TV Menu System .................................. 32
Picture Menu..................................................... 32
Mode ............................................................. 32
Brightness/Contrast/Colour/Sharpness/Hue . 32
Colour Temp .................................................. 32
Noise Reduction ........................................... 32
Film Mode ..................................................... 32
Game Mode .................................................. 32
Picture Zoom ................................................ 32
Reset ............................................................ 32
Sound Menu ..................................................... 33
Volume .......................................................... 33
Equalizer ....................................................... 33
Balance ......................................................... 33
Headphone ................................................... 33
Sound Mode ................................................ 33
AVL ............................................................... 33
Spdif Out ....................................................... 33
Effect ............................................................. 33
Feature Menu ................................................... 34
Pip-Pap ......................................................... 34
Sleep Timer ................................................... 34
Child Lock ..................................................... 35
Language ...................................................... 35
Default Zoom ................................................ 35
Blue Background .......................................... 35
Logo & License ....................................................... 1
Features ................................................................. 4
Accessories ............................................................ 4
Introduction ............................................................. 5
Preparation ............................................................. 5
Safety Precautions ................................................. 5
Power Source ..................................................... 5
Power Cord ......................................................... 5
Moisture and Water ............................................ 5
Cleaning.............................................................. 5
Ventilation ........................................................... 5
Heat and Flames ................................................ 5
Lightning ............................................................. 5
Replacement Parts ............................................. 6
Servicing ............................................................. 6
Waste Disposal ................................................... 6
Disconnecting the Device ................................... 6
Headphone Volume ............................................ 6
Installation........................................................... 6
LCD Screen ........................................................ 6
Warning .............................................................. 6
If something doesn’t seem to work ..................... 6
Overview of the Remote Control ............................ 7
LCD TV and Operating Buttons .............................. 8
Viewing the Connections- Back Connectors .......... 9
Viewing the Connections - Side Connectors .........11
Side HDMI Connection ..........................................11
Power Connection ................................................ 12
Aerial Connection ................................................. 12
Using the Cable Holder ........................................ 12
Connecting the LCD TV to a PC ........................... 13
Connecting to a DVD Player................................. 14
Using Side AV Connectors ................................... 15
Using Other Connectors ....................................... 16
Connecting Other Equipment via Scart ................ 17
Inserting Batteries in the Remote Control
Handset ................................................................ 18
Operating Range for the Remote Control ............. 18
Switching the TV On/Off ....................................... 18
To Switch the TV On ......................................... 18
The TV will then switch on. ............................... 18
To Switch the TV Off ......................................... 18
Input Selection ...................................................... 19
Basic Operations .................................................. 19
Operation with the Buttons on the TV ............... 19
Volume Setting .............................................. 19
Programme Selection ................................... 19
Viewing Main Menu ....................................... 19
AV Mode ....................................................... 19
Operation with the Remote Control .................. 19
Volume Setting .............................................. 19
Programme Selection (Previous or Next
Programme) .................................................. 19
Programme Selection (Direct Access) .......... 19
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 2A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 2 01.12.2009 15:06:0201.12.2009 15:06:02
English - 3 -
Menu Background ......................................... 35
Backlight ....................................................... 35
Menu Timeout ............................................... 35
Teletext Language ........................................ 35
HDMI PC Full Mode (optional) ...................... 35
Full Mode (optional) ...................................... 35
Ext Out .......................................................... 35
Install Menu ...................................................... 35
Program ........................................................ 35
Band ............................................................. 36
Channel ........................................................ 36
Colour System .............................................. 36
Sound System .............................................. 36
Fine Tune ...................................................... 36
Search .......................................................... 36
Install Menu in AV Modes .............................. 36
Store ............................................................. 36
Program Table ............................................... 36
Source Menu .................................................... 37
PC Mode Menu System........................................ 37
PC Position Menu ............................................. 37
Autoposition .................................................. 38
H (Horizontal) Position .................................. 38
V (Vertical) Position ...................................... 38
Phase ............................................................ 38
Dot Clock ...................................................... 38
PC Picture Menu ........................................... 38
Sound Menu ................................................. 38
Feature Menu ............................................... 38
Source Menu ................................................ 38
Displaying TV Information .................................... 38
Muting Function .................................................... 38
Freezing Picture ................................................... 38
Zoom Modes......................................................... 38
Auto .................................................................. 38
16:9 ................................................................... 39
4:3 ..................................................................... 39
Panoramic......................................................... 39
14:9 ................................................................... 39
Cinema ............................................................. 39
Subtitle .............................................................. 39
Zoom................................................................. 39
Teletext ................................................................. 39
Tips ....................................................................... 40
Screen Care...................................................... 40
Image Persistence ............................................ 40
No Power .......................................................... 40
Poor Picture ...................................................... 40
No Picture ......................................................... 40
Sound ............................................................... 40
Remote Control................................................. 40
Input Sources.................................................... 40
Appendix A: PC Input Typical Display Modes ....... 41
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 42
Appendix C: Pin Specifi cations............................. 43
SCART connector pin specifi cations ................ 43
HDMITM connector pin specifi cations ............... 43
Signal Input ....................................................... 43
PC RGB Terminal (D-sub 15-pin connector) . 43
Appendix D: PIP/PAP Mode Combinations .......... 44
Appendix E: Supported DVI Resolutions .............. 44
Specifi cations ....................................................... 45
Analogue TV Troubleshooter ................................ 46
Digital Terrestrial TV Troubleshooter .................... 47
Computer Monitor TV and HDMI Troubleshooter . 48
ELECTRICAL CONNECTION (UK ONLY) ........... 49
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 3A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 3 01.12.2009 15:06:0301.12.2009 15:06:03
English - 4 -
Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• HDMI connectors for digital video and audio.
This connection is also designed to accept
high defi nition signals.
• 200 programmes from VHF, UHF(analogue).
• 300 programmes for digital mode (IDTV).
• OSD menu system.
• Two scart sockets for external devices (such
as video, video games, audio set, etc.).
• Stereo sound system. (German+Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
• Automatic sound muting when no
transmission.
• NTSC playback.
• PIP / PAP / PAT functions.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5
minutes the TV switches itself automatically
to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP,
Vista.
• Audio line out.
• Game Mode.
• Active antenna power .
Accessories
Remote Control
Batteries
2 X AAA
Instruction Book
Quick Guide
Cable Holder
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 4A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 4 01.12.2009 15:06:0301.12.2009 15:06:03
English - 5 -
Introduction
Thank you for choosing this product. This
manual will guide you for the proper
operation of your TV. Before operating
the TV, please read this manual
thoroughly.
Please do keep this manual in a safe
place for future references.
Preparation
For ventilation, leave a free space of at least
10 cm all around the set. To prevent any fault
and unsafe situations, please do not place any
objects on top of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Please read the following recommended
safety precautions carefully for your
safety.
Power Source
The main power supply for this TV is controlled
by inserting or removing the power plug.
The TV set should be operated only from a
220-240 V AC, 50 Hz outlet. Ensure that you
select the correct voltage setting for your
convenience.
Power Cord
Do not place the set, a piece of furniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug. Do
not unplug the appliance by pulling from the
power cord and never touch the power cord with
wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or
tie it with other cords. The power cords should
be placed in such a way that they are not likely
to be stepped on. A damaged power cord can
cause fi re or give you an electric shock. When it
is damaged and needs to be replaced, it should
be done by qualifi ed personnel.
Make enough room for inserting and removing
the power plug.
Place the TV as close to the outlet as
possible.
Moisture and Water
Do not use this device in a
humid and damp place (avoid
the bathroom, the sink in the
kitchen, and near the washing
machine). Do not expose this
device to rain or water, as this may
be dangerous and do not place
objects fi lled with liquids, such as
fl ower vases, on top. Avoid from
dripping or splashing.
If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualifi ed
personnel before operating it any further.
Cleaning
Before cleaning, unplug the TV
set from the wall outlet. Do not
use liquid or aerosol cleaners.
Use soft and dry cloth.
Ventilation
The slots and openings on the TV
set are intended for ventilation
and to ensure reliable operation. To prevent
overheating, these openings must not be
blocked or covered in anyway.
Heat and Flames
The set should not be placed
near to open fl ames and sources
of intense heat such as an electric
heater. Ensure that no open fl ame
sources, such as lighted candles,
are placed on top of the TV.
Warning
To prevent the spread of fi re, keep candles or
other open fl ames away from this product at
all times.
Lightning
In case of storm and lightning
or when going on holiday,
disconnect the power cord from
the wall outlet.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 5A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 5 01.12.2009 15:06:0301.12.2009 15:06:03
English - 6 -
Replacement Parts
When replacement parts are required, make
sure that the service technician has used
replacement parts, which are specifi ed by the
manufacturer or have the same specifi cations as
the original one. Unauthorized substitutions may
result in fi re, electrical shock or other hazards.
Servicing
Please refer all servicing to
qualifi ed personnel. Do not
remove the cover yourself as
this may result in an electric
shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as foil bag, must be kept away
from children.
• Batteries, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an environment friendly manner.
Find out about the legal regulations which
apply in your area.
• Cold cathode fluorescent lamp in LCD
PANEL contains a small amount of mercury;
please follow the local laws or regulations for
disposal.
Disconnecting the Device
The mains plug is used to disconnect TV set
from the mains and therefore it shall remain
readily operable.
Headphone Volume
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
Installation
To prevent injury, this device must
be securely attached to the wall in accordance
with the installation instructions when mounted
to the wall (if the option is available).
LCD Screen
The LCD panel is a very high technology product
with about a million thin fi lm transistors, giving
you fi ne picture details. Occasionally, a few
non-active pixels may appear on the screen
as a fi xed blue, green or red point. Please note
that this does not affect the performance of
your product.
Warning
This appliance is intended for domestic use only,
commercial or any other use may invalidate the
warranty and might be dangerous.
If the mains lead becomes damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualifi ed person to avoid a hazard.
The mains plug shall be the main disconnect
device and shall remain operable at all times.
Do not expose this product to dripping or
splashing or place any objects containing water
such as vases on or near the product.
Do not place a naked fl ame source such as
lighted candles on or near the product.
Do not dispose of batteries in a fi re, danger of
explosion.
This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
Do not leave your TV in standby or operating
mode when you leave your house.
If something doesn’t seem to work
Please check through the troubleshooting
section before you call a service department
or the shop where you bought your
television
If there is something about your television.
which you do not understand and you live in
the UK you can phone our help line during
normal offi ce hours on: 0844 8009595
If you need a service engineer please phone
the number on your sales receipt.
Calls are charged at standard rates.
We apologise for any inconvenience caused
by minor inconsistencies in these instructions,
which may occur as a result of product
improvement and development.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 6A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 6 01.12.2009 15:06:0401.12.2009 15:06:04
English - 7 -
Overview of the Remote Control
TV/DTV:1. TV – Digital TV
OK2. : OK / Confi rm / Freezing Picture /
Channel list (in DTV mode)
3. : Cursor left
MENU4. : Menu on-off
ZOOM5. : Image size
RED6. : Sound menu / Channel list (in DTV
mode) (*)
GREEN7. : Picture Menu / Subtitle on-off (in
DTV mode) (*)
AV8. : Source selection
9. / : Programme up / down
10. : Info
11. : Index Page (in TXT mode)
12. : Expand (in TXT mode)
13. : Hold (in TXT mode)
TV/RADIO14. : Switches between TV and
radio broadcasts.
15. : Standby
GUIDE16. : Programme guide
17. : Cursor up
18. : Cursor right
BACK19. : Return
20. : Cursor down
21. : Effect on-off / Jump to now (in EPG
mode)
BLUE22. : Install Menu / Favourite Mode (in
DTV mode) (*)
YELLOW23. : Feature Menu / Current
Language (in DTV mode) (*)
24. / : Volume up / down
25. : Muting
0,1...8,926. :Numeric buttons.
27. : Teletext on / PAT (Picture-and-text) /
Teletext off
28. : Reveal
29. : Time / Subtitle on-off (**)
30. : Subtitle on-off
31. : Mono-stereo / Dual I-II
(*) For EU country options only.
(**) For UK only.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 7A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 7 01.12.2009 15:06:0401.12.2009 15:06:04
English - 8 -
LCD TV and Operating Buttons
FRONT VIEW
REAR VIEW
SIDE VIEW
Standby button1.
TV/AV button2.
Programme Up/3.
Down buttons
Volume Up/Down 4.
buttons
Note: Press “” /
“ ” buttons at the same
time to view main menu.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 8A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 8 01.12.2009 15:06:0601.12.2009 15:06:06
English - 9 -
Viewing the Connections- Back Connectors
12 13
1. SPDIF
Digital Out outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has SPDIF input.
2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
Audio Line Outs 3. output audio signals to an external device such as an optional sound
system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an
audio cable.
4. SCART 2 inputs or outputs for external devices.
Note: S-VHS VCR should be connected to EXT-2 and can be watched from EXT-2S source.
5. SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically switch to
AV mode. If both sockets are employed at the same time, SCART 1 will override SCART 2 unless
manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the Scart 1 (Ext-1) socket
Note: Picture state can be affected by scart cable quality.
6. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 9A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 9 01.12.2009 15:06:0701.12.2009 15:06:07
English - 10 -
on on the TV and the component video outputs of your device. While connecting, be sure
that the letters on your TV, “ Y ”, “ Pb ”, “ Pr ” correspond with your device’s connectors.
7. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that
connects to the TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of
your PC to enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your
device to enable component audio.
8. SPDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input.
9. RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate antenna cable, as shown in the
illustrationin the following pages.
10. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
11. HDMI 3: HDMI Input
HDMI 2: 12. HDMI Input
HDMI 1: HDMI Input13.
HDMI Inputs are for connecting a device that has an HDMITM connector . Your LCD
Television is capable of displaying High Defi nition pictures from devices such as a High
Defi nition Satellite Receiver or DVD Player. These devices must be connected via the
HDMITM connector or Component Socket. These sockets can accept either 720p or 1080i
signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would defi nitely recommend to
plug all your cables into the back of the LCD before mounting to the wall.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 10A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 10 01.12.2009 15:06:0801.12.2009 15:06:08
English - 11 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you 1.
to view all the channels that you subscribe to. For more
information, see “Conditional Access” section.
Side HDMI Input is for connecting a device that has an 2.
HDMITM connector.
Headphone jack is used for connecting an external 3.
headphone to the system. Connect to the HEADPHONE
jack to listen to the TV from headphones (optional).
Video Input 4. (INPUT FAV) is used for connecting video
signals of external devices.Connect the video cable
between the VIDEO IN socket on the TV and the VIDEO
OUT jack on your device.
Audio Inputs 5. (INPUT FAV) are used for connecting audio
signals of external devices. Connect the audio cable
between the AUDIO INPUTS on the TV and the AUDIO
OUTPUT jacks on your device. Note: If you connect a
device to the TV via the VIDEO INPUT, you should also
connect your device with an audio cable to the AUDIO
INPUTS of the TV to enable audio.
Standby switch is used for turning the TV on or off.6.
Side HDMI Connection
You can use the side HDMI input to connect a device that has an HDMI connector to your TV.
Use
an appropriate HDMI cable to make the connection. Note that you should switch to HDMI-4 source
to view the content from the connected device. Power off both the TV and the device
before making any connections.
HDMI DEVICE SIDE VIEW
INPUT AV
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 11A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 11 01.12.2009 15:06:0801.12.2009 15:06:08
English - 12 -
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect
the set to the mains.
• Plug the power cable to the mains outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located on the rear of the
TV.
Using the Cable Holder
You can use the supplied cable holder as the following:
• Place the cable holder into the cable holder hole located on the rear of the TV as illustrated
above.
• Place cables into the cable holder after all necessary connections are made.
REAR VIEW
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 12A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 12 01.12.2009 15:06:1001.12.2009 15:06:10
English - 13 -
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your LCD TV, you can connect your computer
to the TV set.
• Power off both computer and display before making any connections.
• Use 15-pin D-sub display cable to connect a PC to the LCD TV.
• When the connection is made, switch to PC source. See “Input selection” section.
• Set the resolution that suits your viewing requirements. Resolution information can be found in
the appendix parts.
REAR VIEW
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
PC RGB cable
(not supplied)
to PC input
Audio
Inputs
PC Input
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 13A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 13 01.12.2009 15:06:1101.12.2009 15:06:11
English - 14 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use a component audio cable as illustrated
below. When the connection is made, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown
below.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
HDMI
inputs
Scart sockets
Component
video
inputs
Component
audio
inputs
DVD Player
REAR VIEW
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 14A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 14 01.12.2009 15:06:1201.12.2009 15:06:12
English - 15 -
Using Side AV Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS (INPUT
FAV). For selecting the related source, see the section “Input selection” in the following parts.
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.
Camcorder
Headphone
SIDE VIEW
WARNING:
HEADPHONE VOLUME WARNING
Connect headphones with the volume set low and increase it if required. Prolonged listening
through some headphones at high volume settings can result in hearing damage.
Earphones or Headphones must comply with EN 50332-1 / EN50332-2 to ensure continued
protection from excessive sound pressure levels.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 15A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 15 01.12.2009 15:06:1201.12.2009 15:06:12
English - 16 -
Using Other Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.
• To connect external speakers, use an audio cable. Do not reverse the AUDIO LEFT and AUDIO
RIGHT jacks. Turn on the LCD TV and external speaker set after all connections are made.
Refer to your speaker set’s manual for further queries.
• For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable
sound connection.
• You can connect an external subwoofer by using the SUBWOOFER out of the TV set.
External Speakers
A device that
supports
SPDIF signal.
REAR VIEW
Note: There are two types of SPDIF terminals available. You can use SPDIF coaxial or SPDIF optic.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 16A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 16 01.12.2009 15:06:1501.12.2009 15:06:15
English - 17 -
Connecting Other Equipment via Scart
Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder
to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not
supplied.
Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book.
Note: Scart-2 input supports S-VIDEO (Y/C).
REAR VIEW
Scart sockets
Decoder
DVD Recorder Video Recorder
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 17A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 17 01.12.2009 15:06:1501.12.2009 15:06:15
English - 18 -
Inserting Batteries in the
Remote Control Handset
• Remove the battery cover located on the back
of the handset by gently pulling backwards
from the indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions
and replace the battery cover.
Note : Remove the battery from remote control handset
when it is not to be used for a long period. Otherwise it
can be damaged due to leakage of batteries.
Batteries should not be exposed to excessive
heat such as sunshine, fi re or the like.
Operating Range for the
Remote Control
• Point the top of the remote control toward the
LCD TV’s remote sensor LED while pressing
a button.
Remote range is approximately 7m/23ft.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC
50 Hz.
• Switch the “ ” button to position “|” so the TV
will switch to standby mode. Then the standby
LED lights up.
• To switch on the TV from standby mode
either:
• Press the “ ” button, / or a numeric
button on the remote control.
• Press the or button on the TV.
The TV will then switch on.
Note : If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Switch the “ ” button to position 2 as
illustrated, ( ) so the TV will switch OFF.
• To power down the TV completely, unplug
the power cord from the mains socket.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 18A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 18 01.12.2009 15:06:1501.12.2009 15:06:15
English - 19 -
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press “AV” button on your remote control for
directly changing sources. or,
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“” button to highlight an input and press “ ”
button to select.
Note : You can mark desired source options by
pressing the OK button. Therefore, when “AV” button
is pressed, only the marked source options will be
available (except for the TV source).
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “ ” button to decrease volume or
button to increase volume, so a volume
level scale (slider) will be displayed on the
screen.
Programme Selection
• Press “ ” button to select the next
programme or “ ” button to select the
previous programme.
Viewing Main Menu
• Press “ ” / “ ” buttons at the same
time to view main menu. In the Main menu
select sub-menu using “ ” or “ ” buttons
and enter the sub-menu using “ ” or “
” buttons. To learn the usage of the
menus, refer to the menu system sections.
AV Mode
• Press the “ TV/AV ” button in the control panel
on the TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed
to control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume Setting
• Press “ ”button to increase the volume.
Press “ ” button to decrease the volume.
A volume level scale (slider) will be displayed
on the screen.
Programme Selection (Previous or Next
Programme)
• Press “ ” button to select the previous
programme.
• Press “ ” button to select the next
programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 - 299
(for IDTV) or 10-199 (for analogue), press
the numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the fi rst digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 19A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 19 01.12.2009 15:06:1601.12.2009 15:06:16
English - 20 -
Initial Settings
When the TV set is operated for the fi rst time,
the IDTV turns on fi rst.
Because this is the fi rst time the TV is used,
there are no channels stored in the memory.
When the TV is turned on for the fi rst time, the
menu for the language selection appears on the
screen. The message “Welcome please select
your language!” is displayed in all language
options sequentially in the OSD.
By pressing the “ ” or “ ” buttons highlight
the language you want to set and press OK
button. After then, “First time installation” OSD
will appear on the screen.
By pressing “ ” or “ ” buttons, select the
country you want to set and press OK button.
button (** for EU countries).
Note: Country selection OSD will not be
available for UK.
After then, the active antenna selection OSD
appears on the screen:
By pressing “” or “ ” buttons, set active
antenna mode as on or off.
If an active antenna is connected to your TV,
you can select this option as On. Antenna
power should be “Off” when standard antenna
is used instead of the active antenna. See
Confi guration Menu in the following sections
for more information.
Press OK button on the remote control to
continue and the following message will be
displayed on the screen:
To start installation process, select “Yes”, to
cancel select “No”.
• To select the “Yes” or “No” option, highlight the
item by using “ ” or “ ” buttons and press the
OK button.
The IDTV will automatically tune to the UHF or
VHF (** for EU countries) transmission channels,
searching for digital terrestrial TV broadcasts
and displaying the names of channels found.
This process will take about a few minutes. To
cancel searching, you can press the “MENU”
button at any time during the process.
After Automatic Search is completed, the
following message asking for analogue channel
search appears on the screen:
To search for analogue channels, select “Yes”.
TV switches to the analogue TV mode. The
menu below is displayed to search for analogue
channels:
Select your Country, Language and Text
language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue.
To cancel, press the BLUE button.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 20A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 20 01.12.2009 15:06:1701.12.2009 15:06:17
English - 21 -
For more information on this process, see
“Install Menu” section.
Note : For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK only).
General Operation
Pressing the “TV/DTV” button at any time
while watching television programmes will
switch the TV set between the digital terrestrial
television broadcasting and its normal analogue
broadcasting.
Information Banner
• Whenever you change channel, using the
/ button or the numeric buttons, the TV
displays the broadcast picture along with an
information banner at the bottom of the screen
(available only in DTV mode). This will remain
on the screen for a few seconds.
• The information banner can also be displayed
at any time while watching TV by pressing the
button on the remote control:
The information banner gives information on
the channel selected and the programmes on
it. The name of the channel is displayed, along
with its channel list number.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
• Icons are also displayed in the information
banner and if this channel is a favourite
channel, favourite channel icon will also be
displayed.
If the selected channel is locked, you must
enter the correct four numeric code to view the
channel. “ Enter PIN ” will be displayed on the
screen in such a case:
Electronic Programme Guide
(EPG)
• Some, but not all, channels send information
about the current and next events.
• Please note that event information is updated
automatically. If there is no event information
data available in channels, EPG will be
displayed with blanks.
• Press GUIDE button to view the EPG menu.
• Electronic Programme Guide appears on the
screen. It is able to get Information of the
channel - programs weekly by means of 7-DAY-
EPG. All programs of channels are displayed.
The current program is highlighted and there
is brief information about the programs of
the channel, such as: name, short/extended
event description, start & end time. The time
scale can be changed by pressing left or right
buttons. If there is any event information data
available, only programme names and dates
are displayed. On the bottom of the screen;
info bar, showing all the available commands,
will be displayed.
RED button (Shrink) : makes the info boxes
smaller.
GREEN button (Expand) : makes the info
boxes larger.
YELLOW button (Prev day) : displays the
programmes of previous day.
BLUE button (Next day) : displays the
programmes of the next day.
(Details): displays the programmes in
detail.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 21A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 21 01.12.2009 15:06:1701.12.2009 15:06:17
English - 22 -
Numeric buttons (Jump) : go to preferred
channel directly via numeric buttons.
OK : views options for future programmes.
: jumps to the current broadcast.
• Press “0” button to view Guide Search
menu. Using this feature, you can search the
programme guide database in accordance
with the genre selected or with name match.
Info available in the programme guide will be
searched and results matching your criteria
will be listed. You can select programmes or
set timers by highlighting a channel and then
pressing OK button.
Note: Searching process can be performed by the
desired date rate or by the channel basis.
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T),
some programmes are broadcast with subtitles.
Subtitles can be displayed while watching these
programmes.
Note: You can enable subtitles by pressing the (**
for UK) or GREEN (* for EU countries)buttons.
Press the “ M ENU” button to display the main
menu, highlight the Setup and then Language
menu using “ ” or “ ” button and press the
OK button to display the “Language settings”
menu.
Highlight the “Subtitle” item in “Language
settings” menu and use ” or “ button to set
Subtitle to the desired language.
If “Subtitle” is on and a language option is set,
pressing the TELETEXT ( ) button causes
the following warning message display on the
screen (* for UK only):
Digital Teletext (** for UK only)
With digital terrestrial broadcasting (DVB-T),
in addition to pictures and sound, you can also
view digital teletext.
Digital teletext is sometimes broadcast at the
same time with the normal broadcasting.
• Press the TELETEXT ( ) button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor
buttons and OK button.
The operation method may differ depending on
the contents of the digital teletext.
Follow the instructions displayed on digital
teletext screen.
• When Press “SELECT” button or similar
message appears on the screen, press the
OK button.
• When the TELETEXT ( ) button is pressed,
the TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T),
in addition to digital teletext broadcasting
together with the normal broadcasting, there
are also channels with just digital teletext
broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting
is the same as the aspect ratio of the picture
viewed previously.
• When you press the TELETEXT ( ) button
again, the digital teletext screen will be
displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a
number of formats. Press the ZOOM button
repeatedly to select between Auto, 16:9, 4:3,
Panoramic, 14:9, Cinema, Zoom or Subtitle.
When Auto is selected, the format being
displayed is determined by the picture being
broadcast.
PLEASE NOTE : Menu size changes depending on
the chosen image size.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 22A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 22 01.12.2009 15:06:1801.12.2009 15:06:18
English - 23 -
IDTV Menu System
The IDTV menu can only be viewed when
watching digital terrestrial broadcasting. Press
the TV/DTV button to turn IDTV on while the TV
is in analogue mode.
Press the “ M ENU” button. The menu below
appears on the screen:
You can press MENU button again to exit main
menu.
Channel List
Using the “ ” or “ ” button on the remote
control, make sure that the fi rst item, Channel
List, is highlighted and press the OK button to
display the Channel List.
The following operations can be performed in
this menu:
• Navigating the entire list of channels
• Deleting channels
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels
Channel List is the place where the channels
are managed.
Navigating the Entire Channel List
Press “ ” or “ ” button for selecting the
previous or next channel. You can press or
button to move page up or page down.
To watch a specifi c channel, highlight it using
“” or “ ” button and then press “ OK ” button,
while the “Select” item on Channel List menu is
highlighted by using “ ” or “ ” button.
Then the name and number of the selected
channel will be displayed in the top-left and
top-right of the channel display at the top-right
of the screen, respectively.
Moving the channels in the channel list
• Press “ ” or “ ” buttons to select the channel
that will be moved.
• Press “ ” or “ ” buttons to select the “ Move ”
item on Channel List menu.
Following OSD will be displayed next to “ OK ”
item to indicate that enter a number by using
the numeric buttons on the remote control and
press “ OK ” to confi rm.
Note: If you enter the same programme number
of the channel that you want to move, “.... channel
services will be replaced. Do you want to continue?”
OSD will be displayed. Press OK to confi rm or select
“No” to cancel.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel
that will be deleted.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 23A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 23 01.12.2009 15:06:1801.12.2009 15:06:18
English - 24 -
• Press “ ” or “ ” button to select the “Delete’’
item on Channel List menu. As seen on
Channel List menu, SELECT is displayed next
to Delete item at the bottom of the screen to
indicate that you must press the OK button to
delete the highlighted channel in the channel
list.
Press the OK button to delete the highlighted
channel in the channel list. Then the message
below appears on the screen:
Press “ ” or “ ” button to highlight the desired
option. If OK button is pressed while “ Yes ” is
highlighted, the highlighted channel is deleted.
Selecting “ No ” cancels the deletion.
Renaming Channels
To rename a specifi c channel, the channel must
be highlighted by pressing “ ” or “ ” button.
Then highlight the Edit Name item by pressing
“” or “ ” button as illustrated below. Press the
OK button to activate the rename feature.
Now pressing “ ” or “ ” button moves to the
previous/next character. Pressing “ ” or “
” button toggles the current character, i.e., ‘b’
character becomes ‘a’ by “ ” and ‘c’ by “ ”.
Pressing the numeric buttons ‘0...9’ replaces
the highlighted character with the characters
printed above the button one by one as the
button is pressed.
Press the “MENU” button to cancel the editing
or OK button to save the new name.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order
to lock a channel you should know the parental
lock password (default value is set to 0000 in
the factory and can only be changed from the
Confi guration menu).
Select the channel to be locked by highlighting
it and select the Lock option by pressing “ ”
or “ ” button. When the OK button is pressed,
a dialog OSD asking for the password will be
displayed.
Enter the password by using the numeric
buttons on the remote control. The lock icon “
” will now be displayed next to the selected
channel. Repeat the same operation to cancel
the lock.
Setting Favourites
You can set various channels as favourites so
that only the favourite channels are navigated.
To set a favourite you should highlight the
“Favourites” item at the bottom of the Channel
List menu.
To set a favourite you should highlight the
“Favourites” item at the bottom of the Channel
List menu. Then press OK button and Edit
Favourite List menu appears on the screen.
You can list your favourite channels using
Favourite List.
Channel list OSD will look like this:
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 24A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 24 01.12.2009 15:06:1901.12.2009 15:06:19
English - 25 -
How to Add a Channel to a Favourites List
• By pressing “ ” or “ ” buttons, highlight the
channel that you want to add to the favourite
list.
• By pressing OK button, the highlighted channel
is added to the Favourite List.
• F icon indicates that a channel is added to
Favourite List.
Removing a Channel from Favourite List
• Highlight the channel that you want to remove
from the favourite list and press OK button to
remove.You can press OK button again to re-
add a channel.
• To activate Favourites, go to the Confi guration
menu and select Favourite mode. Use “” / “
” to set Favourite mode as on. To cancel
Favourites, set Favourite Mode to Off.
On Screen Help
For all menus, press the button to display
the help information about the menu functions.
For Channel List menu the following message
is displayed on the screen:
Program Guide
This section is same with the instructions given
in the General Operations page. Please see
Electronic Programme Guide (EPG) section in
the General Operations part.
Timers
To display timers window, activate the item
from the main menu. To add a timer, press the
YELLOW button on the remote control. Then
“Add Timer” window appears.
Channel : “ ” or “ ” keys will navigate the user
through the TV or Radio list.
Date : Starting date is entered via the Left/Right
or the numeric buttons.
Start : Starting time is entered via the Left/Right
or the numeric buttons.
End : Ending time is entered via the Left/Right
or the numeric buttons.
Duration: Duration between Start and End
time.
Repeat: You can set a timer to be repeated as
Once, Daily or Weekly.
Change/Delete : permits or prohibits any
modifi cations for other users.
You can save the adjustments by pressing the
GREEN key or cancel the process by pressing
the RED button. You can edit the list via GREEN
key and delete with the RED button.
Conditional Access
• Press the MENU button to display the main
menu and use the “ ” or “ ” button to highlight
the “Conditional Access” line and press the
OK button:
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 25A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 25 01.12.2009 15:06:1901.12.2009 15:06:19
English - 26 -
Some Digital Terrestrial channels operate
on a Pay Per View basis. These require a
subscription and a hardware decoder.
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the TV
using the following procedure.
• Switch off the TV and unplug from the
mains.
• Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the
left-hand side of the TV (from front view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Conditional Access then pressing the
OK button. (CAM set up menu is not displayed
when it is not required.)
• To see the viewing contract information:
enter IDTV; press the “ MENU ” button, then
highlight Conditional Access and press the
OK button.
• When no module is inserted, “No Conditional
Access module detected” message appears
on the screen.
• Refer to the module instruction manual for
details of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.
TV Setup
You can use this item to display the TV
functions.
The digital TV Setup menu screen is accessed
from the main menu. Press the “MENU” button
to display the main menu and use “ ” or “ ”
button to highlight “TV Setup”, press the OK
button to display TV Setup menu screen.
You can fi nd detailed information for all menu
items in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the BACK button on
the remote control to exit.
Dolby Digital (* for EU countries only)
In the Confi guration Menu, highlight the Dolby
Digital item by pressing “ ” or “ ” buttons.
Use the “ ” or “ ” buttons to set the Dolby
Digital as On or Off. If the channel that you are
watching supports Dolby Digital, you can turn
this setting on.
Hard of Hearing (* for EU countries only)
Use “ ” or “ ” button to select Hard of Hearing
and then press “ ” or “ ” button to set this
setting as On or Off.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 26A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 26 01.12.2009 15:06:2001.12.2009 15:06:20
English - 27 -
If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press “” / “ ” button to set this function
as on or off.
Channel List
Use “ ” or “ ” buttons to go to Channel List
option. Use “ ” or “ ” buttons to toggle Channel
List Mode. If you select “TV Only”, with the “
” or “ ” buttons, you navigate through only TV
channels. If you select “Radio Only”, with the “ ”
or “ ” buttons, you navigate through only radio
channels. If you select “Text Only”, with the “ ”
or “ ” buttons, you navigate through only text
channels. If you select “Show All”, all available
broadcast can be navigated. To save the recent
changes and exit; press the “MENU” button.
Active Antenna
Use “” or “ ” buttons to highlight Active
Antenna option.
When antenna power option is set as On
by pressing “” or “ ” button, +5V will be
transmitted to the antenna output.
This feature enables the use of active
antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Scan Encrypted (**)
(**) For UK only.
Scan Encrypted Channel feature will always be
ON after performing first time installation. When
this setting is on, search process will locate the
encrypted channels as well. If it is set as OFF
manually, encrypted channels will not be located
while in automatic search or manual search.
Use “” or “ ” button to select Scan Encrypted
and then press “” or “ ” button to set this
setting as Yes or No.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
TV automatically powers up at 3.00 A.M. each
day and searches for any new information which
may be broadcast and will download this to
your receiver automatically. This operation will
normally take approximately 30 minutes. If you
have an important recording to be carried out
at 3.00 A.M. and you do not want to interrupt
it, disable auto OAD search by performing the
following:
• Press “MENU” button and using the “ ” or
“” buttons to choose Setup and press the
OK button.
• Highlight Confi guration menu with “ ” or “ ”
keys and press OK .
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.
• Using the“ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with
“” or “ ” keys and pres OK to commence
upgrade.
• After the search progress is completed, the
message “ Completed searching for upgrade.
No new software was found” appears on the
screen if no new software is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording
by repeating the above instructions but this
time selecting ENABLE.
Note: Your TV may start in First Time Installation mode
after OAD update.
Parental Control
Use “ ” or “ ” buttons to go to Parental Lock
option. Press OK button to enter the menu.
A dialog box asking for the lock key will be
displayed. The key is set to “0000” initially. Enter
PIN. If it is incorrect, “Wrong Pin” OSD will be
displayed. If it is correct, the Parental Control
menu will be displayed:
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 27A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 27 01.12.2009 15:06:2001.12.2009 15:06:20
English - 28 -
Maturity Lock (**)
(**) If you set Country option as UK in the fi rst
time installation, Maturity Lock option will not
be visible.
When set, this option gets the maturity information
from the broadcast and if this maturity level is
disabled, does not show video-audio.
Menu Lock
In menu lock you can set locking for all menus,
or the Installation Menu to restrict access to
these menus. If the menu lock is disabled, there
will be free access to the menu system. Use “ ”
or “ ” buttons to go to Menu Lock option. Use “
” or “ ” buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only
with the correct lock key. So the user cannot
add, delete, rename, channels, cannot set
timers.
INSTALLATION MENU : Installation menu is
locked.So the user can’t add channels. Changes
will be updated after exiting ‘Configuration
Menu’.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option.
Press OK to display the “Set PIN” window. Use
numeric buttons to enter new pin number you
will need to input your new pin a second time
for verifi cation purposes. If both pin numbers
are four digits long and the same, the pin will
be changed. The factory default pin number is
0000, if you change the pin number make sure
you write it down and keep it safe.
Time Settings (**)
(**) If you set Country option as UK in the fi rst
time installation, Time Settings option will not
be visible.
In the configuration menu, highlight the Time
Settings item by pressing “ ” or “ ” buttons.
Press OK and Time Settings sub menu will be
displayed on the screen. Current Time,Time
Zone Setting and Time Zone will be available.
Use “ ” or “ ” buttons to highlight the Time
Zone Setting. Time Zone Setting is set using
“” or “ ” buttons. It can be set to AUTO or
MANUAL. When AUTO is selected, Current
Time and Time Zone options will not be available
to be set. If MANUAL option is selected as the
Time Zone Setting, Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time
Zone. Use “ ” or “ ” buttons to change the
Time Zone between GMT-12 or GMT+12.
Current Time on the top of the menu list will
then change according to the selected Time
Zone.
Audio Description
Audio description refers to an additional
narration track for blind and visually impaired
viewers of visual media, including television and
movies. The description narrator talks through
the presentation, describing what is happening
on the screen during the natural pauses in
the audio (and sometimes during dialogue, if
deemed necessary). You can use this feature,
only if the broadcaster supports that additional
narration track. Use “ ” or “ ” buttons to select
an item. Then use “ ” or “ ” buttons to set.
Audio Description
This function enables or disables the audio
description feature by pressing the “ ” or “
” buttons.
Preferred Language
By pressing the “ ” or “ ” buttons the preferred
audio description language is being changed.
This setting can be used, only if it is available.
Relative Volume
Using this option, the Audio Description volume
level can be increased or decrased relatively,
according to the general volume.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 28A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 28 01.12.2009 15:06:2101.12.2009 15:06:21
English - 29 -
Standby Search (*)
(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
Use “ ” or “ ” button to select Standby Search
and then press “ ” or “ ” button to set this
setting as On or Off. If you change Standby
Search to Off, this function will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Language
In this menu the user can adjust the preferred
language. Language is changed by pressing
OK button.
Menu : shows the language of the system
Preferred
These settings will be used if available.
Otherwise the current settings will be used.
• Audio : by pressing “ ” or “ ” keys change the
audio language.
• Subtitle : alter the subtitle language with “
” or “ ” keys. The chosen language will be
seen in subtitles.
• Guide : By pressing “ ” or “ ” buttons change
the guide language.
Current
• Audio : if audio language is supported change
the audio language by pressing “ ” or “ ”
buttons
• Subtitle : if subtitle is backed up, alter the
subtitle language with “ ” or “ ” buttons. The
chosen language will be seen in subtitles.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
Language Settings
In the configuration menu, highlight the
Language Settings item by pressing “ ” or “
” buttons. Press OK and Language Settings
submenu will be displayed on the screen:
Use “ ” or “ ” buttons to highlight the menu
item that will be adjusted and then press “” or
“ ” button to set.
Notes:
• System Language determines the on-screen
menu language.
• Audio Language is used for selecting the
soundtrack of a channels.
• Primary settings are the first priority when
multiple choices are available on a broadcast.
Secondary settings are the alternatives when
the first options are not available.
Installation
The Installation menu is mainly intended to
help you for creating a Channel Table in the
most effi cient way. Select Installation from the
Confi guration menu by pressing “ ” or “ ”
buttons.
This menu includes the following items:
• Automatic channel scan
• Manual Channel Scan
• Clear Service List (*)
• First Time Installation
(*) For Denmark, Sweden, Norway or Finland.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 29A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 29 01.12.2009 15:06:2101.12.2009 15:06:21
English - 30 -
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item
is highlighted.
The following message appears on the
screen:
Highlight Yes or No by using “ ” or “ ” buttons
and press OK button to confi rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
Select your Country , Language and Text
language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Manual Channel Scan
In manual channel scan, the number of the
multiplex is entered manually and only that
multiplex is searched for the channels. For every
valid channel number, signal level and signal
quality are shown on the screen.
In both manual and auto search any existing
channel in the database is not re-stored to avoid
redundant duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.
Use this setting to clear channels stored. Press
“” or “ ” button to select Clear Service List and
then press OK. The following OSD message will
be displayed on the screen:
Press OK to cancel. Select Yes by pressing “
” or “ ” button and press OK to delete all of
the channels.
First Time Installation
The user can use this item to load default
settings, which were loaded to the receiver at
the factory.
To install factory settings, highlight “First Time
Installation” menu item and press OK button,
then you will be asked whether or not to delete
the settings. Selecting “Yes” by pressing OK
button while the “Yes” is highlighted will delete
the existing channel table.
Then you will be asked to confi rm for deleting
all channels and settings:
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 30A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 30 01.12.2009 15:06:2201.12.2009 15:06:22
English - 31 -
By selecting Yes and pressing the OK button,
the existing channel table will be deleted.
After factory settings are loaded, “First Time
Installation” menu will be displayed.
The menu which is displayed for language
selection appears on the screen at fi rst. By using
“” or “ ” buttons, select the desired language
option, and press OK button to activate.
After then, “First time installation” OSD will
appear on the screen. By pressing “ ” or “ ”
buttons, select the Country you want to set and
press OK button (* only for EU countries).
- Next, active antenna mode selection OSD will
appear on the screen.Use “” or “ ” to set and
press OK to continue.See the section, “Initial
Settings” for more information.
After active antenna mode option is selected, a
message asking for automatic search appears
on the screen:
Press the OK button to start installation. After
search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
Select your Country , Language and TXT
Language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Navigating the Analogue TV
Menu System
• Press “ MENU ” to display the main menu.
• Press “ ” or “ ” button to select an icon.
• Use “ ” or “ ” button to highlight.
• Press “ ” or “ ” buttons to change the settings.
• Press “ ” for more options.
• Press OK to store.
• To exit the menu or return from sub-menu
screen, press “ MENU ”.
Note : These explanations are valid for the navigation
of the analogue TV menu system. To select options
that are explained in the following parts, refer to
“Navigating the Analogue TV Menu System”.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 31A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 31 01.12.2009 15:06:2201.12.2009 15:06:22
English - 32 -
Analogue TV Menu System
Picture Menu
Mode
For your viewing requirements, you can set the
related mode option.
Press “ ” or “ ” button to select Mode . Press
“” or “ ” button to choose from one of these
options: Cinema , Dynamic and Natural .
Brightness/Contrast/Colour/Sharpness/
Hue
Press “ ” or “ ” button to select the desired
option. Press “ ” or “ ” button to set the level.
Note : Hue option can only be visible when the TV
receives an NTSC signal.
Colour Temp
Press “ ” or “ ” button to select Colour Temp .
Press “ ” or “ ” to choose from one of these
options: Cool , Normal and Warm .
Note :
• Setting Cool option gives white colours a slight
blue stress.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to reduce
the noise amount.
Press “ ” or “ ” button to select Noise
Reduction. Press “ ” or “ ” to choose from one
of these options: Low , Medium , High or Off .
Film Mode
Films are recorded at a different number
of frames per second to normal television
programmes.
Press “ ” or “ ” button to select Film Mode .
Press “ ” or “ ” button to set this feature On
or Off.
Turn this feature on when you are watching.
fi lms to see the fast motion scenes clearly.
Game Mode
Select Game Mode by pressing “ ” or “
” button. Use “ ” or “ ” button to set Game
Mode as On or Off . When Game Mode is set
to On, specific game mode settings, which
are optimized for better video quality, will be
loaded.
Also; Picture Mode, Contrast, Brightness,
Sharpness, Colour and Colour Temp settings
will be invisible and disabled while Game Mode
is on.
Note :
Picture mode selection button on the remote control
will have no function while Game Mode is on.
If the TV is switched to PIP/PAP mode, Game Mode
setting will be disabled and be removed from the
Picture menu.
Picture Zoom
Select Picture Zoom by pressing “ ” or “ ”
button.
Use “ ” or “ ” buttons, to change picture zoom
to Auto , 16:9 , 4:3 , Panoramic , 14:9 , Cinema ,
Subtitle or Zoom .
Reset
Press “ ” or “ ” button to select Reset . Press
“” or “ ” or OK button to reset the picture
modes to factory default settings.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 32A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 32 01.12.2009 15:06:2301.12.2009 15:06:23
English - 33 -
Sound Menu
Volume
Press “ ” or “ ” button to select Volume .
Press “ ” or “ ” button to change the level of
the Volume.
Equalizer
Press “ ” or “ ” button to select Equalizer .
Press “ ” button to view equalizer menu.
Press “ ” or “ ” button to change the preset.
In equalizer menu, the preset can be changed
to Music , Movie , Speech , Flat , Classic and
User .
Select the desired frequency by pressing “
” or “ ” button and increase or decrease the
frequency gain by pressing “ ” or “ ” button.
Press the “ M ENU” button to return to the
previous menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .
Balance
This setting is used for emphasizing left or right
speaker balance.
Press “ ” or “ ” button to select Balance.
Press “ ” or “ ” button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.
Headphone
Press “ ” or “ ” button to select Headphone .
Press “ ” button to view the headphone
menu.
Headphone sub-menu options are described
below:
Volume
Press “ ” or “ ” button to select Volume . Press
“” button to increase headphone volume
level. Press “ ” button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .
Sound Mode
Press “ ” or “ ” button to select Sound Mode .
Using “ ” or “ ” button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press “ ” or “ ” button to select AVL . Press “ ”
or “ ” button to set the AVL as On or Off .
Spdif Out
Press “ ” or “ ” button to select Spdif Out .
Press “ ” or “ ” button to set the Spdif Out .
as On or Off .
Note : If Spdif Out is set to On, headphone will be
disabled.
Effect
If you are watching a mono broadcast, set Effect
on to obtain a better sound effect which will be
more stereo-like. If the current sound system is
stereo, switching this effect on will give a more
spatial effect.
Press “ ” or “ ” button to select Effect. Press
“ ” or “ ” button to set as On or Off .
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 33A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 33 01.12.2009 15:06:2401.12.2009 15:06:24
English - 34 -
Feature Menu
Pip-Pap
In the Feature menu, highlight PIP item by
pressing “ ” or “ ” buttons. Press “ ” button
to enter PIP submenu:
Using “ ” or “ ” button, you can switch to PIP,
PAP mode or turn off the feature.
• When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by an orange frame
around it. The active window can be changed
by pressing “ ” or “ ” button. The status info
OSD belongs to active window. The place of
the status OSDs are same for both windows.
• At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios of
the windows are fi xed.
When you switch to PAP Mode, main window
in
PIP Mode will be displayed on the right side of
the screen. The active window can be changed
by pressing “ ” or “ ” button.
If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and
the following settings will appear on the same
menu screen.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use “ ” or “ ”
buttons to switch the TV to Pip , Pap or Off .
Pip Size
Using this setting, you can set the size of the
Pip window. Press “ ” or “ ” button to highlight
Pip Size item. Use “ ” or “ ” button to set Pip
Size to Small or Large.
Note : This setting will be inactive if the TV is set to
Pap mode.
PIP Position
This setting is used for moving the sub
picture.
Select PIP Position item by using “ ” or
“” button. Use “ ” or “ ” button to adjust PIP
position.
Positions available are: Bottom Right,Bottom
Left, Top Left and Top Right.
Source
PIP Source setting enables you to select the
source of the sub picture.
Select PIP Source item by using “ ” or “
” button. Use “ ” or “ ” button to set PIP
source.
Program
This setting will be unavailable to be used.
Swap
Select Swap item by using “ ” or “ ” button.
Use “ ” or “ ” button to set. This function
enables to swap between the main and the
PIP picture.
Note : See Appendix E for all PIP/PAP modes.
Sleep Timer
Press “ ” or “ ” button to select Sleep Timer .
Use “ ” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and
120 minutes in steps of 10 minutes.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 34A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 34 01.12.2009 15:06:2401.12.2009 15:06:24
English - 35 -
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press “ ” or “ ” button to select Child Lock .
Use “ ” or “ ” button to set the Child Lock On
or Off . When On is selected, the TV can only
be controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.
Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.
Language
Press “ ” or “ ” button to select Language .
Use “ ” or “ ” button to select the Language .
Default Zoom
While zoom mode is set as AUTO , the TV will
set the zoom mode in accordance with the
signal of the broadcast. If there is no WSS or
aspect ratio information, the TV will then use this
setting to adopt. Press “ ” or “ ” button to select
Default Zoom . You can set Default Zoom to
Panoramic , 16:9 , 4:3 or 14:9 by pressing “
” or “ ” button.
Blue Background
If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On .
By pressing “ ” or “ ” button, select Blue
Background . Press “ ” or “ ” button to set
Blue Background as On or Off .
Menu Background
Press “ ” or “ ” button to select Menu
Background . You can set menu background
level by pressing “ ” or “ ” button.
Backlight
This setting controls the backlight level. Select
Backlight by pressing “ ” or “ ” button. Press“
” or “ ” button to set Backlight to Auto,
Medium , Maximum or Minimum .
Menu Timeout
To set a specific display timeout for menu
screens, set a value for this option.
Press “ ” or “ ” button to select Menu Timeout .
Use “ ” or “ ” button to change menu timeout
to 15 sec , 30 sec or 60 sec .
Teletext Language
Press “ ” or “ ” button to select Teletext
Language . Use “ ” or “ ” button to change
Teletext Language to West, East , Turk/Gre ,
Cyrillic, Arabic or Persian .
HDMI PC Full Mode (optional)
If you want to view PC screen in HDMI mode
by using external connection, HDMI PC FULL
MODE option should be On to adjust the screen
ratio correctly. This item might be inactive in
some resolutions.
Note: If you connect an HDMI device and switch the
TV to HDMI mode, this feature will be visible (except
for 1080i/1080P resolution).
Full Mode (optional)
If you connect a device via HDMI or YPbPr
connectors and set 1080i/1080P resolutions,
Full Mode item will be visible.You can set Full
Mode as 1:1 or Normal by using “” or “ ”.If you
select 1:1, screen ratio will be adjusted correctly.
If you set Normal, screen ratio may expand.
Ext Out
Press “ ” or “ ” button to select Ext Out. Use “
” or “ ” button to set the Ext Out as On or Off.
Note :
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Install Menu
Program
Press “ ” or “ ” button to select Program. Use
“” or “ ” button to select the program number.
You can also enter a number using the numeric
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 35A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 35 01.12.2009 15:06:2501.12.2009 15:06:25
English - 36 -
buttons on the remote control. There are 200
programme storage between 0 and 199.
Band
Band can be selected either C or S. Press “ ”
or “ ” button to set Band.
Channel
Channel can be changed by “ ” or “ ” button
or numeric buttons.
Colour System
Press “ ” or “ ” button to select Colour System.
Use “ ” or “ ” button to change the colour
system to PAL, PAL 60, SECAM or AUTO.
Sound System
Press “ ” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound
system to BG,DK, I, L or L’.
Fine Tune
Press “ ” or “ ” button to select Fine Tune.
Press “ ” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “
” or “ ” button to start programme searching.
You can also enter the desired frequency
using the numeric buttons while Search item
is highlighted.
Install Menu in AV Modes
The following screen appears in the install menu
when the TV is in AV modes. Note that limited
options will be available. Switch to TV mode for
viewing complete version of the Install menu.
Colour System
Press “ ” or “ ” button to select Colour
System . Use “ ” or “ ” button to change the
colour system to PAL, SECAM, PAL60, AUTO,
NTSC 4,43 or NTSC 3,58.
Store
Press “ ” or “ ” button to select Store Program .
Press “ ” or OK button to store the settings.
“ Stored... ” will be displayed on the screen.
Program Table
Select Program Table by pressing “ ” or “
” button.
By moving the cursor in four directions you can
reach 20 programmes in the same page. You
can scroll the pages up or down by pressing the
navigation buttons to see all the programmes
in TV mode (except for the AV modes). By
cursor action, programme selection is done
automatically.
Name
To change the name of a programme, select the
programme and press the RED button.
The fi rst letter of the selected name will be
highlighted. Press “ ” or “ ” button to change
that letter and “ ” or “ ” button to select the
other letters. By pressing the RED button, you
can store the name.
Move
Select the programme which you want to insert
by navigation buttons. Press the GREEN
button. By navigation buttons move the selected
programme to the decided programme space
and press the GREEN button again.
Delete
To delete a programme, press the YELLOW
button. Pressing the YELLOW button again
erases the selected programme from the
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 36A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 36 01.12.2009 15:06:2601.12.2009 15:06:26
English - 37 -
programme list, and the following programmes
shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System
menu will appear on the screen:
Country
Press “ ” or “ ” button to select your country.
If you want to exit from A.P.S. function, press
the BLUE button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following OSD
will be displayed:
Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.
Source Menu
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu
appears on the screen:
In source menu, highlight a source by pressing
“” or “ ” button and switch to that mode by
pressing “ ” button. Source options are; TV ,
DTV , EXT-1 , EXT-2 , EXT-2S, FAV , HDMI-1 ,
HDMI-2 , HDMI-3 , HDMI-4 , YPbPr or PC-
VGA .
Note : Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
PC Mode Menu System
See “Connecting the LCD TV to a PC” section
for connecting a PC to the TV set.
For switching to PC source, press “AV” button
on your remote control and select PC input.
You can also use “Source” menu to switch to
PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.
PC Position Menu
Select the first icon by pressing “ ” or
“” button. PC Position menu appears on the
screen:
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 37A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 37 01.12.2009 15:06:2601.12.2009 15:06:26
English - 38 -
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.
Select Autoposition item by using “ ” or “ ”
buttons. Press OK button.
Warning : Please ensure auto adjustment is
performed with a full screen image to ensure
best results.
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
Select H Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the
top or bottom of the screen.
Select V Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
Phase
Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy
or noisy picture on the screen. In such a case
you can use this item to get a clear picture by
trial and error method.
Select Phase item by using “ ” or “ ” buttons.
Use “ ” or “ ” button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.
Select Dot Clock item by using “ ” or “ ” buttons.
Use “ ” or “ ” button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press “ ” or “ ” button to select the second icon.
PC Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical
to settings defi ned in TV picture menu under
“Analogue TV Menu System”.
Note : If you set Colour Temp as User, you can defi ne
R, G, B settings manually.
Sound Menu
The items in this menu are described at “Sound
Menu” section explained in “Menu System”.
Feature Menu
Feature menu settings are identical to the
settings explained in “ Feature Menu ” section
in “ Menu System ”.
Source Menu
Source menu settings are identical to the
settings explained in “ Source Menu ” section
in “ Menu System ”.
Displaying TV Information
Programme Number , Programme Name ,
Sound Indicator and Zoom Mode information is
displayed on the screen when a new programme
is entered or “ ” button is pressed.
Muting Function
Press “ ” button to disable sound. Muting
indicator will be displayed in the upper side of
the screen.
To cancel muting, there are two alternatives;
the fi rst one is pressing the “ ” button and the
second one is increasing the volume level.
Freezing Picture
You can freeze the picture on the screen by
pressing the “ OK ” button on the remote control.
Press the “ OK ” button to freeze picture. Press
again to quit freeze mode.
Note: This feature will not be available while in DTV
mode.
Zoom Modes
You can change the aspect ratio (image size)
of the TV for viewing the picture in different
zoom modes.
Press “ZOOM” button to directly change the
zoom mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
In PC mode, only 16:9 mode is available.
Auto
When a WSS (Wide Screen Signalling) signal,
which shows the aspect ratio of the picture, is
included in the broadcast signal or the signal
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 38A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 38 01.12.2009 15:06:2701.12.2009 15:06:27
English - 39 -
from an external device, the TV automatically
changes the ZOOM mode according to the
WSS signal.
• When the AUTO mode does not function
correctly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.
16:9
This uniformly stretches the left and right sides
of a normal picture (4:3 aspect ratio) to fi ll the
wide TV screen.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the 16:9 mode to restore the picture
to its original shape.
4:3
Use to view a normal picture (4:3 aspect ratio)
as this is its original size.
Panoramic
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen,
without making the picture appear unnatural.
The top and bottom of the picture are slightly
cut off.
14:9
This zooms up the wide picture (14:9 aspect
ratio) to the upper and lower limits of the
screen.
Cinema
This zooms up the wide picture (16:9 aspect
ratio) to the full screen.
Subtitle
This zooms up the wide picture (16:9 aspect
ratio) with subtitles to the full screen.
Zoom
This option zooms to the picture.
Note: You can shift to screen up or down by pressing
“” / “ ” buttons while picture zoom is selected as
panaromic, 14:9, Cinema or Subtitle.
Teletext
Teletext system transmits information such as
news, sports and weather on your TV. Note
that is the signal degrades, for example in
poor/adverse weather conditions, some text
errors may occur or the teletext mode may be
aborted.
Teletext function buttons are listed below:
“ ” Teletext On-Off / PAT Mode
Activates teletext mode when pressed once.
Pressing this button again will split the screen
into two windows, one displaying the teletext
and the other displaying the current channel.
Pressing again will quit the teletext mode.
“ ” Index
Selects the teletext index page.
“ ” Expand
Press once to enlarge top half of the page, press
again to enlarge the bottom half of the page.
Press again to revert back to normal size.
“ ” Reveal
Shows hidden information (e.g. solutions of
games).
“ ” Hold
Holds a text page when convenient. Press again
to resume.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 39A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 39 01.12.2009 15:06:2701.12.2009 15:06:27
English - 40 -
“ ” Subcode Pages / Time
Selects subcode pages if available when the
teletext is activated. When the teletext is not
activated, displays time info if the programme
has teletext transmission.
/ and numbers (0-9)
Press to select a page.
Note : Most TV stations use code 100 for their index
pages.
Coloured Buttons
(RED/GREEN/YELLOW/BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.
When FASTEXT system is available, sections in
a teletext page will become colour-coded and can
be selected by pressing the coloured buttons.
Press a coloured button that corresponds to
with your needs.
The coloured writings will appear, showing
you which coloured buttons to use when TOP
text transmission is present. Pressing or
commands will request the next or previous
page respec tively.
Tips
Screen Care
Clean the screen with a slightly damp, soft
cloth. Do not use abrasive solvents as they may
damage the coating layer of the TV screen.
For your safety, unplug the mains plug when
cleaning the set. When moving the TV, hold it
properly from the bottom part.
Image Persistence
Please note that ghosting may occur while
displaying a persistent image. LCD TVs’ image
persistence may disappear after a short time.
Try turning off the TV for a while.
To avoid this, do not leave the screen in still
picture for extended periods.
No Power
If your TV system has no power, please check
the main power cable and connection to the
mains socket outlet.
Poor Picture
Have you selected the correct TV system? Is
your TV set or house aerial located too close
to a non-earthed audio equipment or neon
lights, etc.?
Mountains or high buildings can cause double
pictures or ghost images. Sometimes you can
improve the picture quality by changing the
direction of the aerial.
Is the picture or teletext unrecognisable? Check
if you have entered the correct frequency.
Please retune the channels.
The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one of
the peripherals.
No Picture
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs used
to connect the aerial? If you are in doubt, consult
your dealer.
No Picture means that your TV is not receiving
a transmission. Have you selected the correct
button on the remote control? Try once more.
Also make sure the correct input source has
been selected.
Sound
You can not hear any sound. Did you perhaps
interrupt the sound, pressing the button?
Sound is coming from only one of the speakers.
Is the balance set to one extreme? See Sound
Menu .
Remote Control
Your TV no longer responds to the remote
control. Perhaps the batteries are exhausted.
If so you can still use the local buttons at the
bottom of the TV.
Input Sources
If you cannot select an input source, it is possible
that no device is connected.
Check the AV cables and connections if you
have tried to connect a device.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 40A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 40 01.12.2009 15:06:2801.12.2009 15:06:28
English - 41 -
Appendix A: PC Input Typical Display Modes
The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of
some of the typical video display modes.
Your TV may not support different resolutions. Supported resolution modes are listed below.
If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Note: Resolution modes indicated with (*) are not available for PIP/PAP modes.
Index
Resolution Frequency
Standard Supported
Zoom Modes
Hor Ver Ver (Hz) Hor
(KHz)
1640 350 85 37.9 VESA 16:9, 4:3
3640 400 85 37.9 VESA 16:9, 4:3
4640 400 70 31.5 IBM VGA 16:9, 4:3
6640 480 60 31.5 VESA 16:9, 4:3
7640 480 66 35.0 MAC 16:9, 4:3
8640 480 72 37.9 VESA 16:9, 4:3
9640 480 75 37.5 VESA 16:9, 4:3
10 640 480 85 43.3 VESA 16:9, 4:3
11 800 600 56 35.2 VESA 16:9, 4:3
12 800 600 60 37.9 VESA 16:9, 4:3
13 800 600 70 43.8 16:9, 4:3
14 800 600 72 48.1 VESA 16:9, 4:3
15 800 600 75 46.9 VESA 16:9, 4:3
16 800 600 85 53.7 VESA 16:9, 4:3
17 832 624 75 49.7 MAC 16:9, 4:3
18 1024 768 43 35.5 VESA
(interlace) 16:9, 4:3
19 1024 768 60 48.4 VESA 16:9, 4:3
20* 1024 768 70 56.5 VESA 16:9, 4:3
21* 1024 768 72 57.7 16:9, 4:3
22* 1024 768 75 60.0 16:9, 4:3
23* 1024 768 85 68.3 16:9, 4:3
24 1152 864 60 53.8 16:9, 4:3
25* 1152 864 70 64.2 VESA 16:9, 4:3
26* 1152 864 75 67.5 VESA 16:9, 4:3
27* 1152 864 85 77.1 VESA 16:9, 4:3
28* 1152 870 75 68.9 MAC 16:9, 4:3
29 1280 768 60 47.7 VESA 16:9, 4:3
30 1360 768 60 47.7 16:9, 4:3
31* 1280 768 75 60.2 VESA 16:9, 4:3
32 1280 960 60 60.0 VESA 16:9, 4:3
33* 1280 960 75 75.0 VESA 16:9, 4:3
34* 1280 960 85 85.9 VESA 16:9, 4:3
35 1280 1024 60 64.0 VESA 16:9
36* 1280 1024 75 80.0 VESA 16:9
37* 1280 1024 85 91.1 VESA 16:9
38 1400 1050 60 65.3 16:9
39* 1400 1050 75 82.3 16:9
40 1440 900 60 55.9 16:9
41* 1440 900 75 70.6 16:9
42* 1600 1200 60 75.0 VESA 16:9
43 1680 1050 60 65.3 16:9
44* 1920 1200 60 74.5 16:9
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 41A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 41 01.12.2009 15:06:2801.12.2009 15:06:28
English - 42 -
Appendix B: AV and HDMI Signal Compatibility (Input Signal
Types)
Source Supported Signals Available
EXT-1
(SCART 1)
PAL 50/60 O
NTSC 60 O
RGB 50 O
RGB 60 O
EXT-2
(SCART-2)
PAL 50/60 O
NTSC 60 O
RGB 50 X
RGB 60 X
S-VHS 50 O
S-VHS 60 O
FAV PAL 50/60 O
NTSC 60 O
YPbPr
480I 60Hz O
480P 60Hz O
576I 50Hz O
576P 50Hz O
720P 50Hz O
720P 60Hz O
1080I 50Hz O
1080I 60Hz O
1080P 50Hz O
1080P 60Hz O
1080P 60Hz O
HDMI1
HDMI2
HDMI3
HDMI4
480I 60Hz O
480P 60Hz O
576I 50Hz O
576P 50Hz O
720P 50Hz O
720P 60Hz O
1080I 50Hz O
1080I 60Hz O
1080P 50Hz O
1080P 60Hz O
1080P 24 HZ O
(X: Not Available, O: Available)
Note : In some cases a signal on the LCD TV may not be displayed properly. The problem may
be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do
expereince such a problem please contact your dealer and also the manufacturer of the source
equipment.
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 42A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 42 01.12.2009 15:06:2801.12.2009 15:06:28
English - 43 -
Appendix C : Pin Specifi cations
SCART connector pin specifi cations
Pin Input signal Pin Input signal
1AUDIO OUT (RIGHT) 12 Not used
2AUDIO IN (RIGHT) 13 RGB-R GND
3AUDIO OUT (LEFT/MONO) 14 GND
4AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN
5RGB-B GND 16 BLANKING SIGNAL
6AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND
7RGB-B IN 18 BLANKING SIGNAL GND
8AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT
9RGB-G GND 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN
10 Not used 21 GND / SHIELD (CHASSIS)
11 RGB-G IN
HDMITM connector pin specifi cations
Pin Input signal Pin Input signal
1TMDS Data2+ 11 TMDS Clock Shield
2TMDS Data2 Shield 12 TMDS Clock-
3TMDS Data 2- 13 CEC
4TMDS Data 1+ 14 Reserved (N.C. on device)
5TMDS Data1 Shield 15 SCL
6TMDS Data1- 16 SDA
7TMDS Data0+ 17 DDC/CED Ground
8TMDS Data0 Shield 18 +5V Power
9TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock+
Signal Input
PC RGB Terminal (D-sub 15-pin connector)
Pin Input signal
1R
2G or sync on green
3B
4No connection
5No connection
6R.GND
7G.GND
8B.GND
9No connection
10 GND
11 No connection
12 [SDA]
13 H.sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 43A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 43 01.12.2009 15:06:2801.12.2009 15:06:28
English - 44 -
Appendix D: PIP/PAP Mode Combinations
MAIN TV DTV Scart1 Scart2 Scart2S FAV HDMI1 HDMI2 HDMI3 HDMI4 YPbPr PC-
VGA
TV 889
(RGB) 888999999
DTV 8899 99999999
Scart1 9
(RGB) 989
(RGB)
9
(RGB)
9
(RGB) 999999
Scart2 899
(RGB) 888999999
Scart2S 899
(RGB) 8889999
FAV 899
(RGB) 888999999
HDMI1 9999 99888899
HDMI2 9999 99888899
HDMI3 9999 99888899
HDMI4 9999 99888899
YPbPr 9999 9999989
PC-VGA 9999 9999998
( RGB ): This indicates that, selection is possible only if Scart-1 has a RGB signal.
Restrictions : Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2,
Scart-2 S, FAV.
If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source
can not be switched to the Scart-1 source.
If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source
can not be switched to TV, Scart-2, Scart-2 S, and FAV sources.
Appendix E: Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI converter cables (not supplied),
you can refer to the following resolution information.
24Hz 25Hz 30Hz 50Hz 60Hz
480i ;
480p ;
576i ;
576p ;
720p ;;
1080i ;;
1080p ;;;; ;
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 44A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 44 01.12.2009 15:06:2801.12.2009 15:06:28
English - 45 -
Specifi cations
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
Digital
Reception
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1 for UK
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
NUMBER OF PRESET CHANNELS
200 (Analog) / 300 (Digital)
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50 Hz.
AUDIO
German + Nicam Stereo
AUDIO OUTPUT POWER (W
RMS.
) (10% THD)
2 x 8
POWER CONSUMPTION (W)
150 W (max)
< 1 W (Standby)
PANEL
32” Wide Display
DIMENSIONS
W xHxD (with stand): 776 mm x 567 mm x 212 mm
Weight : 12.5 Kg (with stand)
W xHxD (without stand): 776 mm x 524 mm x 94 mm (TV only)
Weight : 11.1 Kg (TV only)
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 45A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 45 01.12.2009 15:06:2901.12.2009 15:06:29
English - 46 -
Analogue TV Troubleshooter
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 46A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 46 01.12.2009 15:06:2901.12.2009 15:06:29
English - 47 -
Digital Terrestrial TV Troubleshooter
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 47A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 47 01.12.2009 15:06:2901.12.2009 15:06:29
English - 48 -
Computer Monitor TV and HDMI Troubleshooter
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 48A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 48 01.12.2009 15:06:2901.12.2009 15:06:29
English - 49 -
ELECTRICAL CONNECTION (UK ONLY)
For your safety please read the following information
Warning: This appliance must be earthed.
The appliance must be connected to a 220-240 volts 50 cycle AC supply by means of a three pin
socket, suitably earthed and should be protected by a 3 amp fuse in the plug or a 5 amp fuse in
the consumer unit.
The appliance is supplied with a moulded 13 amp 3 pin mains plug fi tted with a 5 amp fuse. Should
the fuse require replacement, it must be replaced with a fuse rated at 5 amp and approved to
BS1362.
The plug contains a removable fuse cover that must be refi tted when the fuse is replaced. In the
event of the fuse cover being lost or damaged, the plug must not be used until a replacement
cover has been obtained.
If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for any
other reason, then the fuse should be removed and the cut off plug disposed of safely to prevent
the hazard of electric shock.
There is a danger of electric shock if the cut off plug is inserted into any 13 amp socket outlet.
How to wire a 13 amp plug.
Important
The wires in the mains lead on this appliance are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue – Neutral
Brown – Live
As the colours may not correspond with the markings identifying the terminals in your plug proceed
as follows.
The green and yellow wire must be connected to the terminal in the plug which is marked with
the letter E or with the earth symbol or coloured green and yellow.
The blue wire must be connected to the terminal marked N or coloured black.
The brown wire must be connected to the terminal marked L or coloured red.
You must make sure the mains cord is held securely under the cord clamp
A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 49A01_[GB]_SSM_MB35_32882W_(RM-C2503-1C_UK)_IDTV_BRONZE4_10064675_50158524.indd 49 01.12.2009 15:06:2901.12.2009 15:06:29
INSTRUCTIONS
ENGLISH
LT-32DA1BJ
©2009 Victor Company of Japan, Limited 1109TMH-VT-VT
50156584
WIDE LCD PANEL TV
If something doesn't seem to work
If there is something about your appliance which you do
not understand and you live in the UK you can
Phone our help line during normal office hours on:
0844 8009595
Calls are charged at standard rates.
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may occur
as a result of product improvement and development.
Kesa U.K HU1 3AU 29 / 04 / 2008
䄰た䍏噅剟孇䉝当卍彍䈳㕟㌲㠸㉗弨前ⵃ㈵〳ⴱ䍟啋⥟䥄呖彂剏乚䔴弱〰㘴㘷㕟㔰ㄵ㠵㈴
ㄶ⁋慳ﵭ′〰㤠偡穡牴敳椠〹㨲㐺㌸

Navigation menu