JVC LT 32DG20J User Manual 50164178 EN
User Manual: JVC LT-32DG20J LT-32DG20J English, Quick Start Guide
Open the PDF directly: View PDF 
.
Page Count: 1
1. Switch the “ ” button to position “|” so the TV will
switch to standby mode.
To switch on the TV from standby mode either:
2. Press the “ ” button, or a numeric button on
the remote control.
3. Press the “ ” button or or button on the TV.
The TV will then switch on and the standby LED
lights up.
6
5
4
3
2
Quick Start Guide
Insert the batteries into the handset
Connect the aerial straight to your TV
Connect the TV to the mains socket
HDMI input
To switch the TV on Start Auto Setup procedure
1. When the TV is turned on for the first time the
“Welcome” message appears. Press OK button on
the remote control. Then the Installation” message
will appear on the screen. Press OK button to start
installation.
2. After Automatic search is complete, the following
message asking for analogue channel search
appears on screen.
3. Press OK button to start installation.
4. Check Language and then press OK.
PLEASE ENSURE BOTH UNITS ARE SWITCHED
OFF BEFORE CONNECTING. Use a HDMI to HDMI
cable to connect the two units together. To select the
HDMI input, press the AV button on the remote control.
To HDMI connection on
the device
50164178
1
REAR OF THE TV
CABLE TV
...and switch on
insert plug...
UK plug
兓䜭〱彊噃彍䈴㕍彉䑔噟前ⵃ㈵〳ⴱ䍟䉓䥟〶㜴㘱張〱㘴ㄷ
㌱⁍慲琠㈰慲﹡浢愠ㄴ㨲㈺ㄶ
