JVC RX DV5SL DV5SL[J]cover_f.pm5 User Manual LVT0876 001A

RX-DV5SL LVT0876-001A

User Manual: JVC RX-DV5SL RX-DV5SL English,

Open the PDF directly: View PDF .
Page Count: 76

For Customer Use:

Enter below the Model No. and Serial

No. which are located either on the rear,

bottom or side of the cabinet. Retain this

information for future reference.

Model No.

Serial No.

LVT0876-001A

[J]

INSTRUCTIONS

MASTER VOLUME

DVD/SUPER VCD/VCD/CD

DVD AUDIO

INPUT ATT. REC MODE

INPUT

ANALOG/DIGITAL

COMPACT

SUPER VIDEO

SETTING ADJUST MEMORY

RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER

ON/OFF

SURROUND

MODE

FM/AMTAPE/CDR

SOURCE NAME

TVVCRDBSDVD

CONTROL

STANDBY

STANDBY/ON

–

231

564

897

VFP

10/0 +10

100+ TV RETURN

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP

VCRDBS TV AUDIO

TAPETV CDR FM/AM

FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

CHOICE

ENTER

ON SCREEN

ANGLE

ZOOM

DIGEST TOP MENU MENU

RETURN

SURR ON/OFF

SURR MODE

DIMMER

MUTING

PAGE

TV VOL VOLUME

–

SUBWOOFER

CONTROL

STANDBY/ON

CENTER

REAR·L

REAR·R

REMOTE CONTROL RM-SRXDV5J

HOME THEATER

DVD-AUDIO/VIDEO RECEIVER

PROGRESSIVE

HOME THEATER DVD-AUDIO/VIDEO RECEIVER

RX-DV5SL

RX-DV5SL[J]cover_f.pm5 02.8.1, 1:59 AM1

G-1

Warnings, Cautions and Others

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

For U.S.A.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Note to CATV system installer:

This reminder is provided to call the CATV system installer‘s

attention to Section 820-40 of the NEC which provides

guidelines for proper grounding and, in particular, specifies that

the cable ground shall be connected to the grounding system

of the building, as close to the point of cable entry as practical.

RX-DV5SL[J]safety_f.pm5 02.8.1, 1:50 AM1

G-2

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

Caution –– STANDBY/ON button!

Disconnect the mains plug to shut the power off completely.

The STANDBY/ON button in any position does not disconnect the

mains line.

The STANDBY/ON can be remote controlled.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Visible and invisible laser radiation when open and

interlock failed or defeated. Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There are no user service-

able parts inside the Unit; leave all servicing to qualified service

personnel.

RX-DV5SL[J]safety_f.pm5 02.8.1, 1:50 AM2

Table of Contents

Parts Identification ...................................... 2

Front Panel ................................................................................. 2

Remote Control .......................................................................... 3

Getting Started ........................................... 4

Before Installation ...................................................................... 4

Checking the Supplied Accessories ........................................... 4

Putting Batteries in the Remote Control .................................... 4

Connecting the FM and AM Antennas ....................................... 5

Connecting the Speakers ............................................................ 6

Connecting Audio/Video Components ....................................... 7

7About connecting cords ...................................................... 7

7TV connection .................................................................... 8

7VCR connection ................................................................. 9

7DBS tuner connection ......................................................... 9

7Cassette deck/CD recorder connection ............................. 10

7Digital connection............................................................. 10

Basic Operations ....................................... 11

1 Turn On the Power ............................................................... 11

2 Select the Source to Play ..................................................... 11

3 Adjust the Volume ................................................................ 11

Turning Off the Sounds Temporarily ....................................... 12

Turning Off the Power with the Sleep Timer ........................... 12

Changing the Display Brightness ............................................. 12

Changing the Source Name ...................................................... 12

Selecting the Analog or Digital Input Mode ............................ 13

Changing the Digital Input Mode Manually ............................ 13

Attenuating the Input Signal .................................................... 14

Changing the Scanning Mode .................................................. 14

Activating the Recording Mode ............................................... 14

Basic DVD Player Operations ...................... 15

1 Open the Disc Tray .............................................................. 15

2 Load a Disc .......................................................................... 15

3 Start Playback ...................................................................... 15

4 Adjust the Volume ................................................................ 16

5 Activate Realistic Sound Field ............................................. 16

6 Select Surround Mode ......................................................... 16

7 Stop Playback ...................................................................... 16

8 Turn Off the Power (into Standby) ...................................... 16

Tuner Operations ....................................... 17

Tuning into Stations Manually ................................................. 17

Using Preset Tuning ................................................................. 17

Selecting the FM Reception Mode ........................................... 18

Basic Settings ........................................... 19

Operation Buttons .................................................................... 19

Operating Procedure ................................................................. 19

7Speaker information—“SUBWFR,” “FRNT SP,”

“CNTR SP,” and “REAR SP” ........................................... 20

7Speaker distance

—“FRNT D,” “CNTR D,” and “REAR D” ...................... 20

7Crossover frequency—“CROSS” ..................................... 21

7Low frequency effect attenuator—“LFE” ........................ 21

7Dynamic range compression—“D.COMP” ...................... 21

7Digital input (DIGITAL IN) terminals—“DGT” ............. 21

7Auto surround—“AUTO SR” ........................................... 22

7Video output mode—“VOUT” ......................................... 22

Sound Adjustments.................................... 23

Operation Buttons .................................................................... 23

Operating Procedure ................................................................. 23

7Front speaker output balance—“BAL” ............................. 24

7Tone—“BASS” and “TREBLE” ...................................... 24

7Speaker output levels—“SUBWFR,” “CENTER,”

“REAR L,” and “REAR R” .............................................. 24

7DAP effect level—“EFFECT” .......................................... 24

Creating Realistic Sound Fields ................... 25

Activating Surround Mode ........................................................ 27

Selecting Surround Modes ........................................................ 27

Adjusting Surround Mode Using Remote Control................... 28

DVD Player Operations .............................. 29

Disc Information ....................................................................... 29

Using the On-screen Bar .......................................................... 31

Basic Operation through the On-screen Bar ............................ 32

Changing the Time Indication .................................................. 32

Locating a Desired Scene from the Disc Menu ....................... 33

Selecting a View Angle—ANGLE ........................................... 34

Changing the Languages—SUBTITLE and AUDIO ............... 35

Playing from a Specified Position on a Disc ............................ 37

7Locating a desired chapter/track—

Chapter/Track Search ....................................................... 37

7Locating a desired position—Time Search ....................... 37

7Locating a desired scene—DIGEST ................................. 38

Special Picture Playback .......................................................... 39

7Frame-by-frame playback ................................................. 39

7Showing continuous still pictures—STROBE .................. 39

7Playing back in slow-motion ............................................ 39

7Zooming in—ZOOM ........................................................ 39

7Changing the VFP setting—VFP ...................................... 40

Program Playback and Random Playback ............................... 41

Repeat Playback ....................................................................... 42

Additional Information for DVD AUDIO ................................ 43

Special Playback for DVD AUDIO .......................................... 43

MP3 Disc Playback .................................... 45

Basic Operations ...................................................................... 45

Operations through the MP3 CONTROL Screen .................... 46

Repeat Playback ....................................................................... 46

JPEG Disc Playback ................................... 47

Slide-show Playback ................................................................ 47

Operations through the JPEG CONTROL Screen ................... 48

Repeat Playback ....................................................................... 48

Choice Menu Operations............................. 49

Operation Buttons .................................................................... 49

Configuration of Choice Menu ................................................ 49

Operating Procedure ................................................................. 50

7LANGUAGE menu .......................................................... 51

7PICTURE menu ................................................................ 51

7AUDIO menu .................................................................... 52

• Language code list ......................................................... 52

7SPK. SETTING menu ...................................................... 53

7OTHERS menu ................................................................. 54

Restricting Playback by Parental Lock .................................... 55

7Setting Parental Lock ........................................................ 55

7Changing the setting of Parental Lock ............................. 56

7Releasing Parental Lock temporarily................................ 56

• Country/Area codes list for Parental Lock ..................... 57

Glossary for DVD Player............................. 58

AV COMPU LINK Remote Control System .... 59

Operating JVC’s Audio/Video Components ........ 61

Operating Audio Components .................................................. 61

Operating Video Components .................................................. 62

Operating Other Manufacturers’ Equipment ..... 63

Changing the Preset Signal Codes ........................................... 63

Maintenance ............................................. 66

Troubleshooting ......................................... 67

Specifications ............................................ 70

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:50 AM1

Parts Identification

Front Panel

See pages in the parentheses for details.

1 STANDBY/ON button and STANDBY lamp (11)

2Disc tray and illumination lamp (15)

3DVD player operation buttons

0 (open/close), 4 (reverse skip), ¢ (forward skip),

7 (stop), 3 (play), 8 (pause)

4Source selecting buttons (11, 13)

•DVD, DBS, VCR, TV, TAPE/CDR, FM/AM

5SOURCE NAME button (12)

6MASTER VOLUME control (11, 16)

7DVD AUDIO lamp (43)

8INPUT ANALOG/DIGITAL button (13)

INPUT ATT. (attenuator) button (14)

9SURROUND ON/OFF button (16, 27)

pSURROUND MODE button (16, 27)

REC MODE button (14)

qDisplay

•For details, see “Display” below.

wSETTING button (19 – 22)

eADJUST button (23, 24)

rMEMORY button (17)

tCONTROL 5 / ∞ / 2 / 3buttons (17 – 24)

y (phones) jack (11)

uRemote sensor

Display

MASTER VOLUME

DVD/SUPER VCD/VCD/CD

DVD AUDIO

INPUT ATT.

INPUT

ANALOG/DIGITAL

COMPACT

SUPER VIDEO

SETTING ADJUST MEMORY

RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER

ON/OFF

SURROUND

MODE

FM/AMTAPE/CDR

SOURCE NAME

TVVCRDBSDVD

CONTROL

STANDBY

STANDBY/ON

124 6

REC MODE

87qertyuw9p

AUTO

SURROUND

12 3 4 5

ANALOG DIGITAL AUTO

PRO LOGIC

DSP PROGRAM REPEAT RANDOM1A-B PROGRESSIVE INPUT ATT

LS RSS

LFE

LCR

SUBWFR

VOLUME

RESUME SPK. B.S.P BONUS

kHz

MHz

TUNED STEREO AUTO MUTING SLEEP

67 98=~-!@#0

DIGITAL

1Input mode indicators (13)

•ANALOG, DIGITAL AUTO

2Surround mode indicators (25, 26)

•

PRO LOGIC

, DSP

3Play mode indicators (41, 42, 46, 48)

•PROGRAM, REPEAT 1A-B, RANDOM

4PROGRESSIVE indicator (14)

5INPUT ATT indicator (14)

6Sound signal indicators (13)

•

DIGITAL

(Dolby Digital), (DTS Digital Surround),

7Signal and speaker indicators (27)

•L, C , R, SUBWFR (Subwoofer), LFE (Low Frequency Effect),

LS, S, RS

8Surround indicators (27)

•AUTO SURROUND, SURROUND

9RESUME indicator (16)

0SPK. (speaker) indicator (11)

-DVD AUDIO indicators (43)

•B.S.P, BONUS

=Main display

~Tuner mode indicators (17, 18)

•TUNED, STEREO, AUTO MUTING

!SLEEP indicator (12)

@Frequency unit indicators

•MHz (for FM station), kHz (for AM station)

#VOLUME indication

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM2

Parts Identification

Remote Control

See pages in the parentheses for details.

1Operation mode display

2 STANDBY/ON buttons (11, 62 – 65)

•DBS, VCR, TV, AUDIO

3Source selecting buttons (11, 13, 61 – 65)

•TV, TAPE, CDR, FM/AM, DBS, VCR, DVD

4TV/VIDEO button (15, 62, 63)

5REPEAT button (42, 46, 48)

6SLEEP button (12)

7CONTROL button (24, 27, 28, 43, 44)

8ANALOG/DIGITAL INPUT button (13)

9AUDIO button (35, 36)

pSUBTITLE button (35)

qDIMMER button (12)

wANGLE button (34)

PAGE + button (44)

eZOOM button (39)

PAGE – button (44)

rMUTING button (12)

tDIGEST button (38)

yCHOICE button (49, 50)

uON SCREEN button (31, 32, 34 – 38, 41, 42)

iMulti operation buttons

•4, 3, ¢, 7, 8, REW, FF

•TUNING 9 and ( buttons (17)

•GROUP 9 and ( buttons (43)

•FM MODE button (18)

•STROBE button (39)

•TV/DBS CH (channel) + and – buttons (62, 63)

oNumber buttons

•For selecting preset channels (18)

•For adjusting sound (24, 28, 61)

•For operating audio/video components (61 – 65)

•SURR (surround) ON/OFF button (16, 27)

•SURR (surround) MODE button (16, 27)

•VFP button (40)

•TV RETURN button (62, 63)

•PROGRESSIVE button (14)

;TV VOL (volume) + and – buttons (62, 63)

aVOLUME + and – buttons (11, 16)

sMenu operation buttons

•TOP MENU button (33)

•MENU button (33)

•RETURN button (33)

•ENTER button

•Cursor 5/∞/3/2 buttons

–

231

564

VFP

10/0 +10

100+ TV RETURN

REMOTE CONTROL RM-SRXDV5J

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP

VCRDBS TV AUDIO

TAPETV CDR FM/AM

FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

CHOICE

ENTER

ON SCREEN

ANGLE

ZOOM

PAGE

DIGEST TOP MENU MENU

RETURN

SURR ON/OFF

SURR MODE

DIMMER

MUTING TV VOL VOLUME

–

SUBWOOFER

CONTROL

PROGRESSIVE

STANDBY/ON

CENTER

REAR·L

REAR·R

;

HOME THEATER

DVD-AUDIO/VIDEO RECEIVER

Button

CONTROL

Operation mode

Each time you press the button, the

operation mode changes as follows:

Button Operation mode

TV TV

TAPE TAPE

CDR CDR

FM/AM TUNER

DBS DBS

VCR VCR

DVD DVD

When you press one of the following buttons, the remote control operation mode appears on the operation

mode display for about two hours.

Ex. : When you press FM/AM

This mark appears while

the remote control is

transmitting the signal to

the unit.

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM3

Getting Started

Putting Batteries in the Remote Control

Before using the remote control, put two supplied batteries first.

•When using the remote control, aim the remote control directly at

the remote sensor on the unit.

On the back of the remote control, remove the

battery cover.

Insert batteries. Make sure to match the polarity:

(+) to (+) and (–) to (–).

Replace the cover.

If the range or effectiveness of the remote control decreases, replace

the batteries. Use two R6P(SUM-3)/AA(15F) type dry-cell batteries.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

•Place batteries in the remote control so they match the polarity:

(+) to (+) and (–) to (–).

•Use the correct type of batteries. Batteries that look similar may

differ in voltage.

•Always replace both batteries at the same time.

•Do not expose batteries to heat or flame.

Before Installation

General Precautions

•DO NOT insert any metal object into the unit.

•DO NOT disassemble the unit or remove screws, covers, or

cabinet.

•DO NOT expose the unit to rain or moisture.

Locations

•Install the unit in a location that is level and protected from

moisture.

•The temperature around the unit must be between 5˚C and 35˚C

(41˚F and 95˚F).

•Make sure there is good ventilation around the unit. Poor

ventilation could cause overheating and damage the unit.

Handling the unit

•DO NOT touch the power cord with wet hands.

•DO NOT pull on the power cord to unplug it. When unplugging

the cord, always grasp the plug so as not to damage the cord.

•Keep the power cord away from the connecting cords and the

antenna. The power cord may cause noise or screen interference. It

is recommended to use a coaxial cable for antenna connection,

since it is well-shielded against interference.

•When a power failure occurs, or when you unplug the power cord,

the preset settings such as preset FM or AM channels and sound

adjustments may be erased in a few days.

Checking the Supplied Accessories

Check to be sure you have all of the following supplied accessories.

The number in the parentheses indicates the quantity of the pieces

supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

•Composite Video Cord (1)

If anything is missing, contact your dealer immediately.

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM4

Getting Started

Connecting the FM and AM Antennas

AM loop antenna

(supplied)

If AM reception is poor,

connect an outdoor

single vinyl-covered wire

(not supplied).

FM antenna (supplied)

If FM reception is poor, connect

outdoor FM antenna (not supplied).

Snap the tabs on the loop into

the slots of the base to

assemble the AM loop antenna.

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

YPBPR

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

FM 75

COAXIAL

ANTENNA

AM LOOP

FM 75

COAXIAL

AM EXT

FM 75

COAXIAL

123

Rear panel of the unit

AM antenna connection

Connect the AM loop antenna supplied to the AM LOOP

terminals.

Remove the insulation if the AM loop antenna

wire is covered with vinyl.

Press and hold the clamp of the terminal (1),

then insert the wire (2).

Release the clamp.

Turn the loop until you have the best reception.

•If the reception is poor, connect an outdoor single vinyl-

covered wire (not supplied) to the AM EXT terminal. Keep the

AM loop antenna connected.

FM antenna connection

Connect the FM antenna supplied to the FM 75 Ω COAXIAL

terminal as temporary measure.

Extend the supplied FM antenna horizontally.

•If the reception is poor, connect an outdoor FM antenna (not

supplied). Before attaching a 75 Ω antenna with a coaxial type

connector, disconnect the supplied FM antenna.

Note:

•Make sure the antenna conductors do not touch any other

terminals, connecting cords and power cord. This could cause poor

reception.

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM5

Connecting the Speakers

After connecting the front, center and rear speakers, and/or a

subwoofer, set the speaker setting information properly to obtain the

best possible Surround effect. For details, see page 20.

CAUTIONS:

•Use speakers with the SPEAKER IMPEDANCE indicated by the

speaker terminals (8 – 16 Ω).

•DO NOT connect more than one speaker to one speaker terminal.

Connecting the front, center, and rear speakers

For each speaker, connect the (+) and (–) terminals on the rear panel

to the (+) and (–) terminals marked on the speakers respectively.

Cut, twist and remove the insulation at the end of

each speaker cord (not supplied).

Press and hold the clamp of the speaker terminal

(1), then insert the speaker cord (2).

Release the clamp.

123

Connecting the subwoofer speaker

By connecting a subwoofer, you can enhance the bass or reproduce

the original LFE signals recorded in the digital software.

Connect the input jack of a powered subwoofer to the SUB-

WOOFER OUT jack on the rear panel, using a cable with RCA pin

plugs (not supplied).

• Refer also to the manual supplied with your subwoofer.

Note:

•You can place a subwoofer wherever you like since bass sound is

non-directional. Normally place it in front of you.

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT RIGHT LEFT

SUB-

WOOFER

OUT

To left front speaker

To center speaker

To right front

speaker

To left rear

speaker

To right rear

speaker

SUB-

WOOFER

OUT

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT RIGHT LEFT

Powered subwoofer

(example)

Speaker Layout Diagram

Center speaker

Left rear

speaker

Right rear

speaker

Left front

speaker

Right front

speaker

Subwoofer

To obtain the best possible sound from this system, place all the

speakers except the subwoofer at the same distance from the

listening position with each speaker’s front faced toward the

listener.

Then, change the subwoofer and speaker settings to fit your

listening conditions (see page 20).

Getting Started

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM6

Getting Started

Connecting Audio/Video Components

Turn off all the components and the unit before connection.

TV connection

■About connecting cords

Composite video cord (supplied)

S-video cord (not supplied)

Component video cord (not supplied)

•You can use composite video cord (

) and/or S-video cord

(

) for connecting DBS tuner and VCR to this unit.

•You can use component video cord (

) in addition to

and

for connecting your TV to this unit.

•By using

, you can get a better picture quality—in the

order:

•To view the picture from DBS tuner or VCR on your TV, connect

your TV to this unit using the same type of cord for connecting

DBS tuner or VCR to this unit.

•To view the picture from the built-in DVD player, connect the TV

to this unit using

, and/or

, then register the video

output mode correctly (see “Video output mode” on page 22).

•To enjoy the progressive video picture, connect the TV

compatible with the progressive video input using

, then

change the scanning mode correctly (see “Changing the

Scanning Mode” on page 14).

For video connections

The S-video cords and the component video cord are not supplied with this unit.

Use the cords supplied with the other components or purchase them at your dealer.

For audio connections

Connect the external components to this unit with the audio cords.

Use the cord supplied with the other components or purchase them at your dealer.

•When the unit is shipped from the factory, the DIGITAL IN

terminals are set for use with the following components:

–DIGITAL 1 (coaxial): For DBS tuner

–DIGITAL 2 (optical): For TV

•If you connect CDR, change the digital input (DIGITAL IN)

terminal setting (see “Digital input (DIGITAL IN) terminals” on

page 21) and the source name (see “Changing the Source

Name” on page 12) correctly.

•Select the digital input mode correctly (see “Selecting the

Analog or Digital Input Mode” on page 13).

Audio cord (not supplied)

Optical digital cord (not supplied)

Digital coaxial cord (not supplied)

Yellow

Green

Blue

Red

White

Red

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM7

Turn off all the components and the unit before connection.

Getting Started

Illustrations of the input/output terminals below are typical

examples. When you connect other components, refer also to

their manuals since the terminal names actually printed on

their rear vary among the components.

■TV connection

Video connections

DO NOT connect a TV through a VCR or a TV with a built-in

VCR; Otherwise, the picture may be distorted.

DIGITAL

OPTICAL OUT

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

DIGITAL IN

TV TAPE / CDR DBS VCR

AUDIO

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

LEFT

RIGHT

AUDIO

OUT

Audio connections

Before connecting an

optical digital cord,

unplug the protective

plug.

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

DVD COMPONENT VIDEO OUT

S-VIDEO VIDEO

VIDEO IN

DBS

MONITOR

OUT

MONITOR

OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

COMPONENT VIDEO IN

Green

Blue

Red

Green

Red

Blue

Red

White White

Red

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM8

Getting Started

■VCR connection

Turn off the TV and the unit before connection.

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

TV TAPE / CDR DBS VCR

AUDIO

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

OUT

VIDEO

OUT

S-VIDEO

LEFT

RIGHT

AUDIO

OUT

Illustrations of the input/output terminals below are typical examples.

When you connect other components, refer also to their manuals since the

terminal names actually printed on their rear vary among the components.

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

S-VIDEO VIDEO

VIDEO

OUTINOUTIN

S-VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

TV TAPE / CDR DBS VCR

AUDIO

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

LEFT

RIGHT

AUDIO

OUT IN

■DBS tuner connection

VCR

DBS tuner

White

Red

White

Red

White

Red

White

Red

White

Red

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM9

■Cassette deck/CD recorder connection

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

FRONT

SPEAKERS

REAR

SPEAKERS

CENTER

SPEAKER

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

TV TAPE / CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

CAUTION:

SPEAKER

IMPEDANCE

816

RIGHT LEFT

AV COMPU LINK-

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

RIGHT LEFT

TV TAPE / CDR DBS VCR

AUDIO

RIGHT

LEFT

IN INOUT

(REC)

(PLAY)

OUT

(REC)

(PLAY)

LEFT

RIGHT

AUDIO

INOUT

■Digital connection

Before connecting an optical

digital cord, unplug the

protective plug.

Now, you can plug the power cord of the unit into the AC outlet.

CAUTIONS:

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the cord. When unplugging

the cord, always grasp the plug so as not to damage the cord.

Notes:

•Keep the power cord away from the connecting cords and the

antenna cables. The power cord may cause noise or screen

interference.

•The preset settings such as preset channels and sound adjustment

may be erased in a few days in the following cases:

–When you unplug the power cord.

–When a power failure occurs.

Cassette deck

CD recorder

DBS tuner

CD recorder

Getting Started

AM LOOP

FM 75

COAXIAL

AM EXT

SUB-

WOOFER

OUT

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

PCM/STREAM

REAR

SPEAKERS

DIGITAL IN

DVD COMPONENT VIDEO OUT

ANTENNA

/ CDR DBS VCR

AUDIO

S-VIDEO VIDEO

DBS

MONITOR

OUT

MONITOR

OUT

LEFT

ININ

(PLAY)

OUT

(REC)

(PLAY)

DIGITAL OUT

VCR

OUT

(REC)

(PLAY)

VCR

OUT

(REC)

(PLAY)

DIGITAL 1

(DBS)

DIGITAL 2

(TV)

DIGITAL IN

DIGITAL

OUT

DIGITAL

OUT

PCM/STREAM

DIGITAL OUT

CD recorder

White

Red

White

Red

White

Red

White

EN01_10RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM10

Turn On the Power

Press STANDBY/ON on the front panel or

STANDBY/ON AUDIO on the remote control.

The STANDBY lamp goes off and the illumination lamp lights up.

The current source name appears on the display.

•If the built-in DVD player is the current source, “READING”

appears while the unit is detecting the type of the loaded disc

(see page 29).

–Playback starts automatically when you load some DVD

VIDEO.

–“NO DISC” appears on the display when no disc is loaded.

To turn off the power (into standby)

Press STANDBY/ON on the front panel or

STANDBY/ON AUDIO on the remote control again.

The illumination lamp goes off and the

STANDBY lamp lights up.

Note:

•A small amount of the power is consumed even in standby mode.

To turn off the power completely, unplug the AC power cord.

Select the Source to Play

Press one of the source selecting buttons.

DVD : Select the built-in DVD player.

DBS* : Select the DBS tuner.

VCR : Select the VCR.

TV* : Select the TV tuner.

TAPE/CDR* : Select the cassette deck or the CD recorder (front

panel ONLY)

TAPE : Select the cassette deck (remote control ONLY**).

CDR* : Select the CD recorder (remote control ONLY**).

FM/AM : Select an FM or AM broadcast.

When you press one of the buttons listed above, the remote control

operation mode appears on the operation mode display for about 2

hours.

STANDBY

STANDBY/ON

VCRDBS TV AUDIO

STANDBY/ON

On the front panel From the remote control

Basic Operations

STANDBY

STANDBY/ON

On the front panel

From the remote control

FM/AMTAPE/CDR

SOURCE NAME

TVVCRDBSDVD

VCRDBS DVD

TAPETV CDR FM/AM

Notes:

(DIGITAL IN) terminals” on page 21) and digital input mode setting

correctly (see “Selecting the Analog or Digital Input Mode” on page

13). Source name and “DIGITAL” will be shown on the display when

you select the source.

When the source name is not assigned correctly, these buttons

cannot work (see “Changing the Source Name” on page 12).

Adjust the Volume

On the front panel:

To increase the volume,

turn MASTER VOLUME clockwise.

To decrease the volume,

turn MASTER VOLUME counterclockwise.

From the remote control:

To increase the volume,

press and hold VOLUME +.

To decrease the volume,

press and hold VOLUME –.

CAUTION:

Always set the volume to the minimum before starting any sources. If

the volume is set at a high level, the sudden blast of sound energy

can permanently damage your hearing and/or ruin your speakers.

Notes:

•The volume level can be adjusted within the range of “0” (minimum)

to “50” (maximum).

•When DVD is selected as the source with your TV turned on, the

volume level indication appears on the TV.

Listening with headphones

Connect a pair of headphones to the (phones) jack on the

front panel. This cancels the Surround mode currently

selected, deactivates speakers, and activates the

HEADPHONE mode.

The SPK. indicator goes off from the display.

•Disconnecting a pair of headphones from the (phones) jack

cancels the HEADPHONE mode and activates speakers.

HEADPHONE mode

When using the headphones, the following signals are output

regardless of your speaker setting:

— For 2-channel sources, the front left and right channel signals

are output directly from the left and right headphones.

— For multichannel sources, the front left and right, center and

rear channel signals are down-mixed and then output from the

headphones without missing bass element.

— For DVD AUDIO ONLY: When the multichannel track

cannot be down-mixed, only signals of the front left and right

channel are output.

CAUTION:

Be sure to turn down the volume:

•Before connecting or putting on headphones, as high volume can

damage both the headphones and your hearing.

•Before removing headphones, as high volume may output from the

speakers.

MASTER VOLUME

–

VOLUME

DVD AUDIO/VIDEO RECEIVER

Ex. : When you press DVD

EN11-14RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM11

Turning Off the Sounds Temporarily

Press MUTING to mute the sound.

“MUTING” appears on the display and the volume turns off (the

VOLUME indication goes off).

•When DVD is selected as the source with your TV turned on,

“VOLUME –” appears on the TV.

To restore the sound

Press MUTING again.

•Pressing VOLUME + or – on the remote control (or turn

MASTER VOLUME on the front panel) also restores the sound.

Turning Off the Power

with the Sleep Timer

Press SLEEP repeatedly.

The SLEEP indicator lights up on the display.

•Each time you press the button, the shut-off time changes as

follows:

When the shut-off time comes

The unit is turned off automatically.

To check or change the remaining time until the shut-off time

Press SLEEP once.

The remaining time (in minutes) until the shut-off time appears.

•To change the shut-off time, press SLEEP repeatedly.

To cancel the Sleep Timer

Press SLEEP repeatedly until “SLEEP 0” appears on the display.

(The SLEEP indicator goes off.)

•Turning off the unit also cancels the Sleep Timer.

Note:

•If Auto Standby (see page 54) and Sleep Timer are used at a time,

one with the early shut-off time will turn off the unit.

Changing the Display Brightness

Press DIMMER to dim the display.

•Each time you press the button, the display and

illumination lamp dim and brighten alternately.

Changing the Source Name

When you connect an CD recorder to the TAPE/CDR jacks on the

rear panel, change the source name which will be shown on the

display.

Ex. : When changing the source name from “TAPE ” to “CDR”

Press TAPE/CDR (SOURCE NAME) to select as

the source.

Press and hold SOURCE NAME (TAPE/CDR)

until “ASSGN. CDR” appears on the display.

To change the source name to “TAPE”

Press and hold SOURCE NAME (TAPE/CDR) until “ASSGN.

TAPE” appears on the display in step

Note:

•Without changing the source name, you can still use the connected

components. However, there may be some inconveniences:

–The unexpected source name will appear on the display when

you press TAPE/CDR (SOURCE NAME) on the front panel.

–The CDR or TAPE button on the remote control cannot work for

selecting the source.

–You cannot use the digital input (see page 10) for the CD

recorder.

DIMMER

From the remote control ONLY

MUTING

SLEEP

From the remote control ONLY

DIGITAL AUTO

VOLUME

SPK. SLEEP

10 20 30 60

120 901500 (off)

SLEEP indicator

On the front panel ONLY

TAPE/CDR

SOURCE NAME

Basic Operations

ANALOG

VOLUME

ASSGN. TAPE ASSGN. CDR

DIGITAL AUTO

SPK.

L R

EN11-14RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM12

Selecting the Analog or Digital Input Mode

When you have connected digital source components using both the

analog connection and the digital connection methods (see pages 7 to

10), you can select the input mode.

•Before selecting the digital input mode, register the digital input

terminal setting correctly (see “Digital input (DIGITAL IN)

terminals” on page 21).

Press one of the source selecting buttons (DBS,

TV, or CDR) for which you want to change the

input mode.

Note:

•

You cannot change the input mode when selecting DVD as the

source. Digital input is always used for the built-in DVD player.

Press INPUT ANALOG/DIGITAL (INPUT ATT.)

on the front panel or ANALOG/DIGITAL INPUT

on the remote control.

The current input mode appears on the display.

•Each time you press the button, the input mode alternates

between the analog input (“ANALOG”*) and the digital input

(“DGTL AUTO”).

*“ANALOG” is the initial setting except for the built-in DVD

player.

DGTL AUTO : Select this for the digital input mode.

The DIGITAL AUTO indicator lights up.

The unit automatically detects the incoming

signal format, then the sound signal indicator

for the detected signal—

DIGITAL

lights up; otherwise, no sound signal indicators

light up.

ANALOG : Select this for the analog input mode.

The ANALOG indicator lights up.

Basic Operations

Changing the Digital Input Mode Manually

If the following symptoms occur while Dolby Digital or DTS

Digital Surround software is played back, you can change the digital

input mode:

•Sound does not come out at the beginning of playback.

•Noise comes out while searching for or skipping chapters or

tracks.

Press CONTROL 3 (or 2) to select “DGTL D.D.”

or “DGTL DTS” while “DGTL AUTO” still remains

on the display.

•Each time you press the button, the digital input mode changes as

follows:

DGTL AUTO : Normally select this.

The DIGITAL AUTO indicator lights up.

The unit automatically detects the incoming

signal format, then the sound signal indicator

for the detected signal lights up.

DGTL D.D. : Select this for playing back software encoded

with Dolby Digital.

The

DIGITAL

indicator lights up*.

DGTL DTS : Select this for playing back software encoded

with DTS Digital Surround.

The indicator lights up*.

* These indicators flash when no signal or the signal without the

proper format is played back.

When DVD is selected as the source, you can also

change the digital input mode by pressing

ANALOG/DIGITAL INPUT repeatedly on the remote

control.

Notes:

•When “DGTL AUTO” cannot recognize the incoming signals, no

sound signal indicators light up on the display.

•When you turn off the unit or select another source, “DGTL DTS”

and “DGTL D.D.” are canceled.

The digital input mode is automatically reset to “DGTL AUTO.”

FM/AMTAPE/CDR

SOURCE NAME

TVVCRDBSDVD

VCRDBS DVD

TAPETV CDR FM/AM

On the front panel

From the remote control

On the front panel

CONTROL

DIGITAL AUTO

VOLUME

DGTL AUTO DGTL D.D.

DGTL DTS

ANALOG

/DIGITAL

INPUT

On the front panel From the remote control

INPUT ATT.

INPUT

ANALOG/DIGITAL

ANALOG

/DIGITAL

INPUT

ANALOG DIGITAL AUTO

VOLUME

SPK.

DGTL AUTO ANALOG

ANALOG/DIGITAL AUTO indicator

EN11-14RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM13

Basic Operations

Attenuating the Input Signal

When the input level of the analog source is too high, the sounds

will be distorted. If this happens, you need to attenuate the input

signal level to prevent the sound distortion.

•You have to make this adjustment for each analog source.

Press and hold INPUT ATT. (INPUT ANALOG/

DIGITAL) until the INPUT ATT indicator lights up

on the display.

•Each time you press and hold the button, the Input Attenuator

turns on (“ATT ON”) or off (“ATT NORMAL”*).

*“ATT NORMAL” is the initial setting.

ATT NORMAL : Normally select this. The analog sound is not

attenuated.

ATT ON : Select this when the analog sound is

distorted.

Notes:

•Some progressive TVs and High-Definition TVs are not fully

compatible with this system. When the unnatural picture is played

back, change the scanning mode to “INTERLACE.” To check the

compatibility of your TV, contact your dealer.

All JVC progressive TVs and High-Definition TVs are fully

compatible with this system respectively.

•When you select “PROGRESSIVE” as the scanning mode, the

picture does not come out correctly through composite video and

S-video jacks.

480p and 480i indicate the number of scanning lines and scanning

format of an image signal.

–480p indicates 480 scanning lines with progressive format.

–480i indicates 480 scanning lines with interlaced format.

Activating the Recording Mode

When you play back the multichannel sources, Recording mode

enables you to record the sounds without missing surround elements

by down-mixing the center and rear channel signals into the front

channel signals.

•For DVD AUDIO ONLY: When the multichannel track cannot be

down-mixed, this function does not take effect.

•When the multichannel software is played back with Recording

mode activated, the sounds are down-mixed and come out through

the front speakers only.

Press and hold REC MODE (SURROUND MODE)

until “RECMODE ON” appears on the display.

•Each time you press and hold the button, Recording mode is

activated (“RECMODE ON”) and deactivated

(“RECMODE OFF”*) alternately.

*“RECMODE OFF” is the initial setting.

RECMODE OFF : Normally select this. The down-mixing is

canceled.

RECMODE ON : Select this for recording the down-mixed

sounds.

When recording with VCR:

You can record the picture on your video tape without the volume

level indication when Recording mode is activated.

•When you do not want to record the on-screen guide icons, see

page 54.

•The choice menu and on-screen bar are always recorded when

they appear on the TV.

CAUTION:

When the front speakers are small, the output sound may be distorted

by Recording mode. In this case, decrease the volume until the sound

distortion diminishes.

Notes:

•When you turn off the unit or select another source, Recording

mode is canceled (“RECMODE OFF”).

•Sound adjustments (see pages 23 and 24) and Surround modes

(see pages 25 to 28) do not affect the recording.

•The following buttons do not work while Recording mode is

activated (“RECMODE ON”):

–SETTING and ADJUST on the front panel

–SURROUND ON/OFF and SURROUND MODE on the front

panel

–Number buttons for adjusting sound on the remote control

INPUT ATT.

INPUT

ANALOG/DIGITAL

On the front panel ONLY

ANALOG INPUT ATT

VOLUME

ATT NORMAL ATT ON

L R

INPUT ATT indicator

Changing the Scanning Mode

This unit supports the progressive scanning system (480p*) as well

as the conventional interlaced scanning system (480i*).

If your TV has component video jacks and supports the progressive

video input, you can enjoy a high quality picture from the built-in

DVD player.

•Refer also to the instruction manuals supplied with your TV.

•You can select the progressive mode according to the original

picture type (film or video source). See page 51.

•Do not change the scanning mode to “PROGRESSIVE” in the

following cases:

–When your TV does not support the progressive video input.

–When you do not connect your TV to the unit using component

video cord.

Press and hold PROGRESSIVE for more than 3

seconds when DVD is selected as the source.

The current scanning mode appears on the display for a while.

•Each time you press and hold the button, the scanning mode

changes “INTERLACE”* and “PROGRESSIVE” alternately.

*“INTERLACE” is the initial setting.

INTERLACE : Select this for conventional TV.

PROGRESSIVE : Select this if your TV with component

jacks supports the progressive video input.

The PROGRESSIVE indicator lights up.

From the remote control ONLY

PROGRESSIVE

VFP

TV RETURN

On the front panel ONLY

ON/OFF

SURROUND

MODE

REC MODE

EN11-14RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM14

By pressing the following buttons, you can pause, advance, or reverse

playback, and locate the beginning of the title, chapter, or track.

To stop playback temporarily

Press 8.

•Pressing 3 starts playback again.

To move back the playback position by 10 seconds

(for DVD VIDEO only)

Press 3 during DVD VIDEO playback.

The unit moves the playback position about 10 seconds before the

current position, then resumes playback.

To advance or reverse playback rapidly

Press and hold ¢ or 4.

While you are pressing and holding ¢ (or 4), the unit advances

(or reverses: except for VCD and SVCD) playback 5 times as fast as

the normal speed. When you press and hold ¢ (or 4) further,

the playback speed changes up to 20 times as fast as the normal

speed.

•Releasing the button resumes the normal playback.

To locate the beginning of the chapter or track

Press ¢ or 4.

Press ¢ (or 4) to locate the beginning of the next (current or

previous) chapter or track.

To locate the chapter or track using the number buttons

Press the number buttons (1 – 10, +10) to select the number of the

desired chapter or track.

Ex. : To select 3, press 3.

To select 11, press +10, then 1.

To select 20, press +10, then 10.

For details about DVD player operations, see pages 29 to

44.

•You can also play back MP3 and JPEG files. See pages 45

to 48.

•When using remote

control, press DVD to

change the remote control

operation mode to the

DVD player operation.

REW/(TUNING/GROUP 9/FF

FM MODE STROBE

– TV/DBS CH +

About indication on the display while playing back a disc

While you are playing back a disc, the playback information

appears on the display as follows:

Ex. : When DVD VIDEO is loaded

Ex. : When audio CD is loaded

Track number Elapsed playing time

SPK.

DIGITAL AUTO

VOLUME

PRO LOGIC

SUBWFR

From the remote control ONLY

231

564

10/0 +10

100+

EFFECT

TEST

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CENTER

REAR·L

REAR·R

DIGITAL AUTO

VOLUME

DIGITAL

AUTO

SURROUND

SPK.

LFE

LS RS

LCR

SUBWFR

Chapter number Elapsed playing time

On the front panel

From the remote control

DVD AUDIO/VIDEO RECEIVER

Open the Disc Tray

Before turning on the unit, turn on your TV and select the correct

video input (see the manual supplied with your TV).

•When you use a JVC’s TV, you can turn on your TV by pressing

STANDBY/ON TV on the remote control and select the

video input by pressing TV/VIDEO. (If your TV is not a JVC’s,

see “Operating Other Manufacturers’ Equipment” on page 63.)

•For changing the OSD messages—the information on the TV

—into the desired language, see pages 49 and 51.

Press 0.

The unit is turned on and the disc tray opens.

The STANDBY lamp goes off and the illumination lamp lights up.

•When a disc is already loaded, pressing 3 turns on the unit and

starts playing back the loaded disc.

Load a Disc

Place a disc correctly with its label side up.

On the front panel ONLY

RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER

FM/AM

TAPE/CDR

SOURCE NAME

VCR

DBS

DVD

STANDBY

STANDBY/ON

DVD AUDIO

INPUT ATT.

INPUT

ANALOG/DIGITAL

DIGITAL

SURROUND

ON/OFF

SURROUND

MODE

CORRECT

INCORRECT

Start Playback

Press 3.

The disc tray closes and the unit starts playing back the loaded disc.

•You can also close the disc tray by pressing 0 on the front panel.

TUNING/GROUP

On the front panel From the remote control

Basic DVD Player Operations

EN15-18RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM15

Basic DVD Player Operations

Adjust the Volume

For details, see “Basic Operations” on page 11.

Activate Realistic Sound Field

You can activate Surround mode for creating realistic sound fields.

•You can activate Surround mode automatically when the digital

multichannel source (Dolby Digital or DTS Digital Surround

software) or 2-channel matrix source (Dolby Surround software) is

played back—Auto Surround (see page 22).

When you activate or deactivate Surround mode manually, do the

following procedures:

On the front panel:

Press SURROUND ON/OFF.

From the remote control:

1) Press CONTROL repeatedly so that

“SOUND” appears on the operation

mode display.

2) Press SURR ON/OFF.

•Each time you press SURROUND ON/OFF on the front panel or

SURR ON/OFF on the remote control, Surround mode is activated

and deactivated alternately.

Select Surround Mode

When the PRO LOGIC II or DSP indicator is lit, you can select

various Surround modes (see page 27).

Press SURROUND MODE (REC MODE) on the

front panel or SURR MODE on the remote control.

•

When you enjoy digital multichannel source such as Dolby Digital

or DTS Digital Surround software, you cannot change Surround

mode. When you enjoy Dolby Digital or DTS Digital Surround 2-

channel including 2-channel matrix source such as Dolby Surround

software, you can select Surround mode from between PRO

LOGIC II MOVIE and PRO LOGIC II MUSIC (see page 27).

Stop Playback

Press 7.

Playback stops.

The unit memorizes the point where you stop playback and the

RESUME indicator lights up on the display (except when an audio

CD is loaded).

While the RESUME indicator is lit on the display, you can start

playback from the memorized point by pressing 3—Resume play.

About Resume play

This unit can memorize the point when you operate the following

procedures:

•Pressing 7 during playback—Pressing 3 starts Resume play

•Changing the source—Pressing DVD or 3 starts Resume play

•Turning off the unit (including Sleep Timer)

—Pressing 3 starts Resume play

Once you start Resume play, the RESUME indicator goes off

(the unit clears the memorized point).

The unit also clears the memorized point when you operate the

following procedures:

•Starting Resume play

•Pressing 7 (while the RESUME indicator is lit on the display)

•Selecting a track by pressing ¢ or 4 for video CD and

super VCD when playback stops

•Selecting program or random playback

•Pressing TOP MENU

•Ejecting the loaded disc

•Turning on the unit by pressing STANDBY/ON on the

front panel or STANDBY/ON AUDIO on the remote

control.

You can cancel Resume play (see “OTHERS menu” on page 54).

To remove the loaded disc

Press 0.

The disc tray opens.

To close the disc tray

Press 0 again.

Turn Off the Power (into Standby)

Press STANDBY/ON on the front panel or

STANDBY/ON AUDIO on the remote control.

The unit is turned off and the STANDBY lamp lights up on the front

panel.

•If you press the button while the disc tray is open, the disc tray

closes automatically, then the unit is turned off.

•A small amount of power is consumed even in standby mode. To

turn off the power completely, unplug the AC power cord.

On the front panel From the remote control

FM MODE

On the front panel From the remote control

MASTER VOLUME

–

VOLUME

ON/OFF

SURROUND

MODE

REC MODE

SURR ON/OFF

On the front panel From the remote control

ON/OFF

SURROUND

MODE

REC MODE

10/0

SURR MODE

STANDBY

STANDBY/ON

VCRDBS TV AUDIO

STANDBY/ON

On the front panel From the remote control

CONTROL

EN15-18RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM16

Tuning into Stations Manually

On the front panel:

Press FM/AM to select the band.

The last received station of the selected band is

tuned in.

The CONTROL buttons now work for tuner

operations.

•Each time you press the button, the band alternates between

FM and AM.

Press CONTROL ∞ (or 5)

repeatedly until “< TUNING >”

appears on the display.

While “< TUNING >” still remains

on the display, press repeatedly or

hold CONTROL 3 (or 2) until you

find the frequency you want.

•Pressing (or holding) CONTROL 3 increases the frequencies.

•Pressing (or holding) CONTROL 2 decreases the frequencies.

From the remote control:

Press FM/AM.

“TUNER” appears on the

operation mode display.

Press repeatedly or hold TUNING 9 or ( until you find the

frequency you want.

•Pressing (or holding) TUNING 9 increases the frequencies.

•Pressing (or holding) TUNING ( decreases the frequencies.

Notes:

•When you hold and release CONTROL

(or TUNING

on the

remote control) or CONTROL

(or TUNING

(

on the remote

control), the frequency keeps changing until a certain station is

tuned in.

•When a station of sufficient signal strength is tuned in, the TUNED

indicator lights up on the display.

•When an FM stereo program is received, the STEREO indicator

also lights up.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be

quickly tuned. You can preset up to 30 FM and 15 AM stations.

7To store the preset stations

Before you start, remember...

There is a time limit in doing the following steps.

If the setting is canceled before you finish, start from step

again.

On the front panel ONLY:

Tune into the station you want to preset (see

“Tuning into Stations Manually”).

•If you want to store the FM reception mode for this station,

select the FM reception mode you want. See “Selecting the

FM Reception Mode” on page 18.

Press MEMORY.

The channel number position starts flashing on the

display for about 5 seconds.

Press CONTROL 3 (or 2) to select

a channel number while the channel

number position is flashing.

Press MEMORY again while the selected

channel number is flashing on the

display.

The station is assigned to the selected channel number.

•The selected channel number stops flashing and then the

frequency starts flashing.

Press CONTROL 3 (or 2) to select another

frequency you want to store while the frequency

is flashing on the display.

Repeat steps

until you store all the

stations you want.

To erase a stored preset station

Storing a new station on a used channel number erases the

previously stored one.

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

Tuner Operations

FM/AM

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

MEMORY

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

CONTROL

MEMORY

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

Ex. : When selecting the FM band

CONTROL

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

CONTROL

ANALOG

VOLUME

SPK. AUTO MUTING

Ex. : When selecting the FM band

ANALOG

VOLUME

SPK.

MHz

AUTO MUTING

EN15-18RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM17

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy, you can

change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station.

Before you start, remember...

There is a time limit in doing the following steps.

If the setting is canceled before you finish, start from step

again.

On the front panel:

While listening to an FM station,

press CONTROL ∞ (or 5)

repeatedly until “< FM MODE >”

appears on the display.

While “< FM MODE >” still remains

on the display, press CONTROL 3

(or 2) to select “MONO.”

•Each time you press the button, the FM

reception mode alternates between “AUTO

MUTING”* and “MONO.”

*“AUTO MUTING” is the initial setting. If you have already

changed the setting, “MONO” will be shown.

AUTO MUTING : Normally select this.

When a program is broadcasted in stereo,

you will hear stereo sound; when in

monaural, you will hear monaural sounds.

This mode is also useful to suppress static

noise between stations. The AUTO

MUTING indicator lights up on the display.

MONO : Select this to improve the reception (but

stereo effect will be lost).

In this mode, you will hear noise while

tuning into the stations. The AUTO

MUTING indicator goes off from the

display. (The STEREO indicator also goes

off.)

7To tune in a preset station

On the front panel:

Press FM/AM to select the band.

The last received station of the selected band is

tuned in.

The CONTROL buttons now work for tuner

operations.

Press CONTROL ∞ (or 5)

repeatedly until “< PRESET >”

appears on the display.

While “< PRESET >” still remains

on the display, press CONTROL 3

(or 2) to select a preset channel

number you want.

•Pressing (or holding) CONTROL 3 increases the preset

channel numbers.

•Pressing (or holding) CONTROL 2 decreases the preset

channel numbers.

From the remote control:

Press FM/AM.

“TUNER” appears on the

operation mode display.

The last received station of the selected band is tuned in.

The number buttons now work for tuner operations.

Press the number buttons to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 30, press +10, +10, then 10.

FM/AM

CONTROL

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

Tuner Operations

To restore the stereo effect

Repeat step

, then select “AUTO MUTING” in step

From the remote control:

Press FM/AM to select an FM station.

Number buttons now work for tuner operations.

Press FM MODE.

•Each time you press the button, the FM reception mode

alternates between “AUTO MUTING” and “MONO.”

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

AUTO MUTING MONO

ANALOG

VOLUME

SPK.

MHz

AUTO MUTING

ANALOG

VOLUME

SPK. TUNED STEREO AUTO MUTING

CONTROL

ANALOG

VOLUME

SPK.

MHz

TUNED STEREO AUTO MUTING

Ex. : When selecting the FM band

EN15-18RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM18

Basic Settings

Some of the following settings are required after connecting and positioning your speakers while others will make operations easier.

You can set the items by using the SETTING button and CONTROL 5/∞/2/3 buttons on the front panel.

Setting items:

•Speaker information for front, center, rear speakers, and subwoofer* •Speaker distance for front, center, and rear speakers*

•Crossover frequency* •Low frequency effect attenuator* •Dynamic range compression*

•Digital input (DIGITAL IN) terminals •Auto surround •Video output mode

Note:

You can also set these items using the Choice menu (see pages 49 to 54).

Operation Buttons

To do the basic settings for this unit, use the buttons on the front

panel.

•When no operation is done for about 5 seconds, the indications on

the display will disappear.

* Pressing SETTING repeatedly also changes the indication.

Configuration of the indications on the display

Operating Procedure

Ex. : When setting the digital input (DIGITAL IN) terminals.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step

again.

Press SETTING.

The CONTROL buttons now work for basic settings.

The setting item selected previously appears on the

display.

Press CONTROL ∞ (or 5)

repeatedly until “DGT (Digital)”

(with the current setting)* appears

on the display.

*“1DBS 2TV” is the initial setting. If you have already changed

the setting, another combination will be shown.

Press CONTROL 3 (or 2) to select

the appropriate digital terminal

setting.

•Each time you press the button, the indication

changes as follows:

SETTING

CONTROL

On the front panel ONLY

Button

SETTING

CONTROL 5/∞

CONTROL 3/2

To do

Display the setting indications on the

display*.

Select an item on the display.

Each time you press the button, the

indication changes as illustrated below.

Adjust the selected item.

SETTING

CONTROL

SPK.

DIGITAL AUTO

VOLUME

CONTROL

DIGITAL AUTO

VOLUME

DGT1DBS 2TV DGT1DBS2CDR

DGT1TV 2DBS

DGT1CDR2DBS DGT1CDR 2TV

DGT1TV 2CDR

(back to the beginning)

SPK.

SUBWFR

(Subwoofer)

FRNT SP

(Front speaker)

CNTR SP

(Center speaker)

REAR SP

(Rear speaker)

FRNT D

(Front distance)

CNTR D

(Center distance)

REAR D

(Rear distance)

CROSS

(Crossover)

LFE

(Low frequency effect)

D.COMP

(Dynamic range compression)

DGT

(Digital)

AUTO SR

(Auto surround)

VOUT

(Video out)

EN19-24RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM19

Speaker information—“SUBWFR (subwoofer),”

“FRNT SP (front speaker),” “CNTR SP (center

speaker),” and “REAR SP (rear speaker)”

To obtain the best possible effect from the Surround modes (see

pages 25 to 28), register the following information after all

connections are completed.

¶For subwoofer:

Select one of the following settings:

YES : Select this when a subwoofer is connected.

NO : Select this when no subwoofer is used.

Notes:

•“NO” is the initial setting.

•If you have selected “NO” for the subwoofer, you can only select

“LARGE” for the front speakers.

¶For front speakers, center speaker, and rear speakers:

Select one of the following settings for each speaker:

LRG (large) : Select this when the speaker size is relatively

large.

SML (small) : Select this when the speaker size is relatively

small.

NO : Select this when you have not connected a

speaker. (Not selectable for the front speakers)

Notes:

•“LRG (large)” is the initial setting for the front speakers, “SML

(small)” for the center and rear speakers.

•Keep the following comment in mind as reference when

adjusting the settings.

–If the size of the cone speaker unit built in your speaker is

greater than 4

inches (12 cm), select “LRG (large),” and if

it is smaller than 4

inches (12 cm), select “SML (small).”

•If you have selected “SML (small)” for the front speakers, you

cannot select “LRG (large)” for the center and rear speakers.

Speaker distance—“FRNT D (front distance),”

“CNTR D (center distance),” and “REAR D

(rear distance)”

The distance from your listening point to the speakers is another

important element to obtain the best possible surround sound of

the Surround modes.

You need to set the distance from your listening point to the

speakers. By referring to the speaker distance setting, this unit

automatically sets the delay time of the sound through each

speaker so that sounds through all the speakers can reach you at

the same time.

Set the distance from the listening point within the range of

1 ft (0.3 m) to 30 ft (9.0 m), in 1 ft (0.3m) interval.

Notes:

•“10ft” is the initial setting. If you have already changed the

setting, another setting will be shown.

•If you have selected “NO” for the center and rear speakers

setting, you cannot set the speaker distance for the center and

rear speakers.

Basic Settings

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

Ex. : In this case,

set “FRNT D” to “11ft,”

set “CNTR D” to “10ft” and

set “REAR D” to “9ft.”

8 ft

(2.4 m)

9 ft

(2.7 m)

10 ft

(3.0 m)

11 ft

(3.3 m)

Left front

speaker Right front

speaker

Right rear

speaker

Subwoofer

Left rear

speaker

Center speaker

EN19-24RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM20

Basic Settings

7Crossover frequency—“CROSS (crossover)”

Small speakers cannot reproduce the bass sounds efficiently. If

you use a small speaker in any position, this unit automatically

reallocates the bass sound elements assigned to the small

speaker to the large speakers.

To use this function properly, set the crossover frequency level

according to the size of the small speaker connected.

•If you have selected “LRG (large)” for all speakers, this

function will not take effect.

Select one of the following settings:

80Hz : Select this frequency when the cone speaker unit

built in the speaker is about 4 3/4 inches (12 cm).

100Hz : Select this frequency when the cone speaker unit

built in the speaker is about 3 15/16 inches (10 cm).

120Hz : Select this frequency when the cone speaker unit

built in the speaker is about 3 3/16 inches (8 cm).

Notes:

•“100Hz” is the initial setting. If you have already changed the

setting, another frequency will be shown.

•Crossover frequency is not valid for the HEADPHONE mode.

7Low frequency effect attenuator—“LFE”

If the bass sound is distorted while playing back software

encoded with Dolby Digital or DTS Digital Surround, set the

LFE level to eliminate distortion.

•This function takes effect only when the LFE signals come in.

Select one of the following settings:

0dB : Normally select this.

–10dB : Select this when the bass sound is distorted.

Note:

•“0dB” is the initial setting. If you have already changed the

setting, “–10dB” will be shown.

SPK.

DIGITAL AUTO

VOLUME

7Dynamic range compression—“D.COMP”

You can compress the dynamic range (difference between

maximum sound and minimum sound) of the reproduced sound.

This is useful when enjoying surround sound at night.

•This function takes effect only when playing back a source

encoded with Dolby Digital.

Select one of the following settings:

OFF : Select this when you want to enjoy surround with its

full dynamic range. (No effect applied.)

MID : Select this when you want to reduce the dynamic range

a little.

MAX : Select this when you want to apply the compression

effect fully. (Useful at night.)

Note:

•“MID” is the initial setting. If you have already changed the

setting, another setting will be shown.

SPK.

DIGITAL AUTO

VOLUME

DIGITAL

LFE

LRC

SUBWFR

LS RS

7Digital input (DIGITAL IN) terminals—“DGT”

When you use the digital input terminals, register what

components are connected to which terminals (DIGITAL IN 1/

DIGITAL IN 2). So, the correct source name will appear when

you select the digital source.

Set the appropriate digital terminal setting.

•Each time you press CONTROL 3 or 2, the display changes

as follows:

1 DBS 2 TV “1 DBS 2 CDR “1 TV 2 DBS “

1 TV 2 CDR “1 CDR 2 DBS “1 CDR 2 TV “

(back to the beginning)

Notes:

•“1DBS 2TV” is the initial setting. If you have already changed

the setting, another combination will be shown.

•If you want to connect a CD recorder to the digital input

terminal, change the source name to “CDR” from “TAPE.”

For details, see “Changing the Source Name” on page 12.

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

DIGITAL LR

SUBWFR

LS RS

EN19-24RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM21

7Auto surround—“AUTO SR”

Surround mode is automatically activated when the digital

multichannel source such as Dolby Digital or DTS Digital

Surround software or 2-channel matrix source such as Dolby

Surround is played back.

You can enjoy Surround mode simply by selecting the source

(with digital input selected for that source)—Auto Surround.

Select one of the following settings:

ON : The AUTO SURROUND indicator always lights up

on the display.

•If multichannel signals come in, an appropriate

Surround mode will be turned on.

•If Dolby Digital 2-channel or DTS 2-channel

including surround signals come in, “PL II

MOVIE” will be selected.

•If Dolby Digital 2-channel or DTS 2-channel

signals without surround signals come in,

“STEREO” will be selected.

•If the other signals come in, nothing will change.

OFF : Select this to deactivate Auto Surround.

7Video output mode—“VOUT”

After connecting your TV to the unit, register the type of the

connected output terminal—VIDEO, S-VIDEO, or

DVD COMPONENT VIDEO OUT.

Without setting this, AV COMPU LINK does not work

appropriately when DVD is selected as the source (see

“AV COMPU LINK Remote Control System” on pages 59 and

60).

Set the output terminal appropriately.

VIDEO : Select this when you connect your TV to VIDEO

jack by using a composite video cord.

S: Select this when you connect your TV to S-VIDEO

jack by using an S-video cord.

COMPNT : Select this when you connect your TV to DVD

COMPONENT VIDEO OUT jacks by using

component video cord.

Note:

•“VIDEO” is the initial setting. If you have already changed the

setting, another setting will be shown.

SPK.

DIGITAL AUTO

VOLUME

Basic Settings

SPK.

DIGITAL AUTO

VOLUME

AUTO

SURROUND

Notes:

•“ON” is the initial setting. If you have already changed the

setting, “OFF” will be shown.

•This function does not take effect in the following cases:

–While playing an analog source.

–While selecting “DGTL D.D.” or “DGTL DTS” as the fixed

digital input mode (see page 13).

•If you press SURROUND ON/OFF (SURR ON/OFF on the

remote control) with Auto Surround activated, Auto Surround

will be canceled temporarily for the currently selected source.

Auto Surround setting will be restored in the following cases:

–When you turn off and on the unit,

–When you change the source,

–When you change the analog/digital input, and

–When you reset “AUTO SR” to “ON” again.

EN19-24RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM22

The following settings are required after connecting and positioning your speakers.

You can adjust the items by using the ADJUST button and CONTROL 5/∞/2/3 buttons on the front panel.

Adjustment items:

•Front speaker output balance* •Tone* •Speaker output levels*

•DAP effect level

Notes:

•The setting contents of adjustment items are memorized for each source.

You can also set these items using the Choice menu (see pages 49 to 54).

Sound Adjustments

Operation Buttons

To do the basic settings for this unit, use the buttons on the front

panel.

•When no operation is done for about 5 seconds, the indications

on the display will disappear.

* You can also make sound adjustment except for front speakers

output balance from the remote control.

** Pressing ADJUST repeatedly also changes the indication.

Configuration of the indications on the display

On the front panel ONLY*

Button

ADJUST

CONTROL 5/∞

CONTROL 3/2

To do

Display the adjustment indications on

the display**.

Select an item on the display.

Each time you press the button, the

indication changes as illustrated below.

Adjust the selected item.

Operating Procedure

Ex. : When setting the front speaker output balance.

Before you start, remember...

There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step

again.

Press ADJUST.

The CONTROL buttons now work for sound

adjustments. The setting item selected previously

appears on the display.

Press CONTROL ∞ (or 5)

repeatedly until “BAL (Balance)”

(with the current setting)* appears

on the display.

*“CENTER” is the initial setting. If you have already changed

the setting, another setting will be shown.

Press CONTROL 3 (or 2) to adjust

the front speaker balance.

•Each time you press the button, the indication

changes as follows:

ADJUST

CONTROL

BAL

(Balance)

BASS

TREBLE

SUBWFR

(Subwoofer)

CENTER

REAR L

(Rear left)

REAR R

(Rear right)

EFFECT

#These indications appear only when the corresponding speakers

information for each speaker is set to other than “NO.”

## “EFFECT” appears only when one of DAP modes (see pages 25

to 28) is activated.

ADJUST

CONTROL

SPK.

DIGITAL AUTO

VOLUME

CONTROL

SPK.

DIGITAL AUTO

VOLUME

CENTERR –21 L –21

EN19-24RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM23

7Front speaker output balance

—“BAL (balance)”

If the sounds you hear from the front right and left speakers are

unequal, you can adjust the speaker output balance.

Adjust the output balance appropriately from the listening

point within the range of R (Right) –21 to CENTER (0) or

CENTER (0) to L (Left) –21.

Note:

•“CENTER” is the initial setting. If you have already changed

the setting, another setting will be shown.

7Tone—“BASS” and “TREBLE”

You can adjust the bass and treble sounds as you like.

Adjust the tone within the range of –10 to +10 in 2 steps

intervals.

Note:

•“0” is the initial setting. If you have already changed the setting,

another setting will be shown.

7Speaker output levels—“SUBWFR

(subwoofer),” “CENTER,” “REAR L (left),”

and “REAR R (right)”

You can adjust the speaker output levels if you have set the

speaker information appropriately.

•You can adjust the output level for center and/or rear speakers

only when one of proper Surround modes is activated (see

page 27).

Adjust the speaker output level within the range of –10 to

+10 in 1 step interval.

Note:

•“0” is the initial setting. If you have already changed the setting,

another setting will be shown.

7DAP effect level—“EFFECT”

While one of DAP modes is activated (the DSP indicator lights

up on the display), you can adjust the effect level.

For details about DAP modes, see pages 25 to 28.

Adjust the effect level within the range of 1 to 5.

Note:

•“3” is the initial setting. If you have already changed the setting,

another setting will be shown.

Sound Adjustments

Adjusting sound from the remote control

Press CONTROL

repeatedly so that

“SOUND” appears on the

operation mode display.

Number buttons now work for sound adjustments.

Adjust the level as follows:

To adjust subwoofer, press SUBWOOFER + or –.

To adjust center speaker, press CENTER + or –.

To adjust left rear speaker, press REAR•L + or –.

To adjust right rear speaker, press REAR•R + or –.

To adjust the effect level (for DAP mode), press EFFECT.

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SPK.

DIGITAL AUTO

VOLUME

SUBWFR

SPK.

DIGITAL AUTO

VOLUME

DIGITAL

LFE

LRC

SUBWFR

LS RS

SPK.

DIGITAL AUTO

VOLUME

DIGITAL

LFE

LRC

SUBWFR

LS RS

SPK.

DIGITAL AUTO

VOLUME

DIGITAL

LFE

LRC

SUBWFR

LS RS

SPK.

ANALOG DSP

VOLUME

SUBWFR

LS RS

DVD AUDIO/VIDEO RECEIVER

The following can be stored for each source:

•Analog/digital input mode (see page 13)

•Input attenuator mode (see page 14)

•Front speaker output balance (see above or page 52)

•Speaker output level (see above or page 53)

•Tone adjustment (see above or page 52)

•DAP effect level (see above)

•Surround mode selection (see page 27)

Note:

•If the source is FM or AM, you can assign a different setting for

each band.

About auto memory

This unit memorizes the settings for each source:

•when you turn off the power (see page 11),

•when you change the source (see page 11),

•when you change the source name (see page 12), and

•when you change the analog/digital input mode (see page 13).

When you change the source, the memorized settings for the

newly selected source are automatically recalled.

EN19-24RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM24

Manufactured underlicense from Digital Theater Systems, Inc. US

PAT. No. 5,451,942 and other world-wide patents issued and

pending. “DTS” and “DTS Digital Surround” are trademarks of

Manufactured under license from Dolby Laboratories. “Dolby,” “Pro

Logic,” and the double-D symbol are trademarks of Dolby

Laboratories.

Creating Realistic Sound Fields

You can use the following Surround modes to reproduce a realistic

sound field:

■Dolby Surround

•Dolby Pro Logic II

•Dolby Digital

■DTS Digital Surround

■DAP (Digital Acoustic Processor) modes

■All Channel Stereo

For DVD AUDIO multichannel surround, see page 43.

■ Dolby Surround

Dolby Pro Logic II*

Dolby Pro Logic II has newly developed multichannel playback

format to decode into 5.1-channel from all 2-channel sources—

stereo source and Dolby Digital encoded source.

Matrix-based encoding/decoding method for Dolby Pro Logic II

makes no limitation for the cutoff frequency of the rear treble and

enables stereo rear sound compared to conventional Dolby Pro

Logic.

•You cannot select Dolby Pro Logic II when playing back DVD

AUDIO.

Dolby Pro Logic II enables to reproduce spacious sound from

original sound without adding any new sounds and tonal colorations.

Dolby Pro Logic II has two modes—Movie mode and Music mode:

Pro Logic II Movie (PL II MOVIE)—suitable for reproduction of

Dolby Surround encoded sources bearing the mark

DOLBY SURROUND

and stereo television sources. You can enjoy sound field very close

to the one created with discrete 5.1-channel sounds.

Pro Logic II Music (PL II MUSIC)—suitable for reproduction of

any 2-channel stereo music sources. You can enjoy wide and deep

sound by using this mode.

•When Dolby Pro Logic II is activated, the PRO LOGIC II

indicator lights up on the display.

Dolby Digital*

Used to reproduce multichannel sound tracks of the software

encoded with Dolby Digital (

DIGITAL

•To enjoy the software encoded with Dolby Digital, connect the

source component using the digital terminal on the rear of this

unit. (See page 10.)

Dolby Digital 5.1-channel encoding method (so-called discrete

multichannel digital audio format) records and digitally compresses

the left front channel, right front channel, center channel, left rear

channel, right rear channel, and LFE channel signals.

Since each channel is completely independent from the other

channel signals to avoid interference, you can obtain much better

sound quality with much stereo and surround effects.

Note:

•Dolby Digital or DTS software can be roughly grouped into two

categories—multichannel (up to 5.1-channel) and 2-channel

software. To enjoy surround sounds while playing Dolby Digital 2-

channel or DTS software, you can use Dolby Pro Logic II.

■ DTS Digital Surround**

Used to reproduce multichannel sound tracks of the software

encoded with DTS Digital Surround ( ).

•To enjoy the software encoded with DTS Digital Surround,

connect the source component using the digital terminal on the

rear of this unit. (See page 10.)

DTS Digital Surround is another discrete multichannel digital

audio format available on CD, LD, and DVD software.

Compared to Dolby Digital, audio compression ratio is relatively

low. This fact allows DTS Digital Surround format to add breadth

and depth to the reproduced sounds. As a result, DTS Digital

Surround features natural, solid and clear sound.

■ DAP (Digital Acoustic Processor) modes

DAP modes have been designed to create important acoustic

surround elements.

•You cannot select DAP modes when playing back DVD

AUDIO.

The sound heard in a live club, dance club, hall or pavilion consists

of direct sound and indirect sound—early reflections and reflections

from behind. Direct sounds reach the listener directly without any

reflection. On the other hand, indirect sounds are delayed by the

distances of the ceiling and walls (see the diagram below).

These indirect sounds are important elements of the acoustic

surround effects. The DAP mode can reproduce a realistic sound

field by adding these indirect sounds.

DAP modes can be used when the front and rear speakers are

connected to this unit (without respect to the center speaker

connection: no sound comes out of the center speaker even if it is

connected).

Typical Multichannel (5.1-channel) reproduction

Subwoofer

Left front

speaker

Right rear

speaker

Left rear

speaker

Center

speaker

Right front

speaker

MASTER VOLUME

DVD/SUPER VCD/VCD/CD

DVD AUDIO

INPUT ATT. REC MODE

INPUT

ANALOG/DIGITAL

COMPACT

SUPER VIDEO

DIGITAL

SURROUND

SETTING ADJUST MEMORY

RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER

ON/OFF

SURROUND

MODE

FM/AMTAPE/CDR

SOURCE NAME

TVVCRDBSDVD

CONTROL

STANDBY

STANDBY/ON

EN25-28RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM25

The following DAP modes are provided for this unit:

LIVE CLUB : Gives the feeling of a live music club with a low

ceiling.

DANCE CLUB : Gives a throbbing bass beat.

HALL : Gives clear vocal and the feeling of a concert

hall.

PAVILION : Gives the spacious feeling of a pavilion with a

high ceiling.

These DAP modes can be used to add the acoustic surround effects

while reproducing 2-channel stereo software, either analog or Linear

PCM digital signal, and can give you a real “being there” feeling.

•When one of the DAP modes is selected, the DSP indicator lights

up on the display.

Early reflections

Direct sounds

Reflections from behind

Creating sound field

■ All Channel Stereo

This mode can reproduce a larger stereo sound field using all the

connected (and activated) speakers.

•You cannot select All Channel Stereo when playing back DVD

AUDIO.

All Channel Stereo can be used when the front and rear

speakers are connected to this receiver without respect to the

center speaker connection.

If the center speaker is connected and activated, the same phases of

the front left and right signals are mixed and output through the

center speaker.

All Channel Stereo can be used while reproducing 2-channel stereo

software, either analog or Linear PCM digital signal.

•When All Channel Stereo is selected, the DSP indicator lights up

on the display.

Creating Realistic Sound Fields

Sound reproduced from normal stereo

Sound reproduced from All Channel Stereo

All Channel Stereo reproduction

䡬: Possible ⳯: Impossible

Available Surround modes for each input signal

Modes STEREO DOLBY DTS PL II PL II LIVE DANCE HALL PAVILION ALL CH

Signals DIGITAL SURROUND MOVIE MUSIC CLUB CLUB ST.

Dolby Digital 䡬䡬⳯⳯⳯⳯⳯⳯⳯⳯

(Multichannel)

Dolby Digital 䡬⳯⳯䡬䡬 ⳯⳯⳯⳯⳯

(2-channel)

Dolby Surround 䡬⳯⳯䡬䡬⳯⳯⳯⳯⳯

(matrix 2-ch)

DTS Digital

Surround 䡬⳯䡬⳯⳯⳯⳯⳯⳯⳯

(Multichannel)

DTS Digital

Surround 䡬⳯⳯䡬䡬 ⳯⳯⳯⳯⳯

(2-channel)

Linear PCM 䡬⳯⳯䡬䡬䡬䡬䡬䡬䡬

Analog 䡬⳯⳯䡬䡬䡬䡬䡬䡬䡬

EN25-28RX-DV5SL[J]f.pm5 02.8.1, 1:51 AM26

Creating Realistic Sound Fields

Activating Surround Mode

When Auto Surround is set to “OFF” or 2-channel source other than

Dolby Surround software is played back, activate Surround mode

manually.

Make sure that you have set the speakers information correctly

(see page 20 or 53).

•If only front speakers are connected, you cannot activate any

Surround mode.

On the front panel:

Press SURROUND ON/OFF.

The SURROUND indicator lights up on the display

(when Auto Surround is set to “OFF”).

•Each time you press the button, Surround mode is

activated and deactivated alternately.

From the remote control:

Press CONTROL repeatedly so that

“SOUND” appears on the operation

mode display.

Number buttons now work for sound adjustments.

Press SURR ON/OFF.

The SURROUND indicator lights up on the

display (when Auto Surround is set to “OFF”).

•Each time you press the button, Surround mode

is activated or deactivated alternately.

About SURROUND indicators

•When Auto Surround is set to

“ON,” the AUTO SURROUND

indicator always lights up on the

display.

•When you activate Surround

mode manually with Auto

Surround set to “OFF,” the

SURROUND indicator lights up

on the display.

Selecting Surround Modes

When 2-channel source is played back with Surround mode

activated, you can select another Surround mode.

Available Surround modes will vary depending on the number of the

connected speakers and the playback sound.

Make sure that you have set the speaker information correctly

(see page 20 or 53).

•You cannot change Surround mode when playing back DVD

AUDIO multichannel track.

•If rear speakers are not connected, you cannot use DAP modes

and All Channel Stereo.

On the front panel:

Press SURROUND MODE.

•Each time you press the button, Surround mode

is changed as illustrated below:

From the remote control:

Press CONTROL repeatedly so that

“SOUND” appears on the operation

mode display.

Number buttons now work for sound adjustments.

Press SURR MODE.

•Each time you press the button, Surround mode is

changed as illustrated below:

When 5 or 4 (except center speaker) speakers are connected:

When 3 (except rear speakers) speakers are connected or

Dolby Digital including matrix source is played back:

ON/OFF

SURROUND

MODE

REC MODE

CONTROL

SURR ON/OFF

DIGITAL AUTO

AUTO

SURROUND

PRO LOGIC

SUBWFR

DIGITAL AUTO

SURROUND

PRO LOGIC

SUBWFR

ON/OFF

SURROUND

MODE

REC MODE

CONTROL

10/0

SURR MODE

Signal indicators Speaker indicators

Signal and speaker indicators on the display

The following signal indicators light up —:

L, R :•When digital input is selected: Light up when

the signals corresponding to each channel come

in.

•When analog input is selected: Always light

up.

C, LS, RS : Light up when the signals corresponding to each

channel come in.

S:Lights up when the monaural rear channel signal

or Dolby Surround encoded signal comes in.

LFE : Lights up when the LFE channel signal comes

in.

The speaker indicators light up as follows:

•The subwoofer speaker indicator ( ) lights up when

“SUBWFR” is set to “YES” (see page 20) or “USE” (see

page 53).

•The other speaker indicators light up only when the

corresponding speaker is activated, and also when required

for the current playback.

DVD AUDIO/VIDEO RECEIVER

DIGITAL AUTO

VOLUME

SURROUND

PRO LOGIC

SUBWFR

PL II MOVIE PL II MUSIC

LIVE CLUB

HALL PAVILION

ALL CH ST.

DANCE CLUB

(back to the beginning)

DIGITAL AUTO

VOLUME

SURROUND

PRO LOGIC

SUBWFR

PL II MOVIE PL II MUSIC

EN25-28RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM27

Adjusting Surround Mode

Using Remote Control

When playing back the source with Surround mode, you can adjust

the speaker output levels for Surround modes.

Once you have adjusted the Surround modes, the adjustment is

memorized for each source.

•You can also adjust Surround modes using the Choice menu (see

pages 49 to 54) or buttons on the front panel (see page 24).

•When using test tone, you can adjust the speaker output levels

without playback sounds.

Select and play back software you like.

Activate and select Surround mode.

•When 2-channel source is played back, you can select

Surround modes.

Adjust the sound.

1) Press CONTROL repeatedly so that

“SOUND” appears on the operation mode

display.

Number buttons now work for the sound adjustment.

2) Adjust the speaker output levels as follows:

To adjust center speaker, press CENTER +/–.*

To adjust left rear speaker, press REAR•L +/–.

To adjust right rear speaker, press REAR•R +/–.

To adjust subwoofer, press SUBWOOFER +/–.

To adjust the effect level, press EFFECT.**

The name for the item currently adjusted appears on the

display. For details, see the illustrations of “Speaker output

levels” on page 24.

Creating Realistic Sound Fields

Notes:

•You can adjust the speaker output levels for the

activated speakers ONLY (the speaker indicators are

lit on the display).

You cannot adjust the output levels of center speaker

when one of DAP modes is activated.

You can adjust the effect level only when one of DAP

modes is activated.

•Before operating the DVD player using remote

control, press DVD to change the remote control

operation mode to DVD.

For using test tone

1) Press CONTROL.

2) Press TEST.

The playback sound stops during playback.

“TEST L” starts flashing on the display and a test tone comes

out of the speakers in the following order:

3) Adjust the speaker output level as follows:

To adjust center speaker, press CENTER +/–.

To adjust left rear speaker, press REAR•L +/–.

To adjust right rear speaker, press REAR•R +/–.

Notes:

•You cannot adjust the speaker output levels if you have set the

speaker information to “NO.”

•No test tone comes out of the speaker when its speaker

information is set to “NO.”

•When you press EFFECT or SUBWOOFER +/–, the test tone

stops.

4) Press TEST to stop the test tone.

The test tone stops.

•When no operation is done, the test tone stops automatically

in about 1 minute.

(

Left front speaker

)

(

Left rear speaker

)(

Right rear speaker

)

(

Center speaker

)(

Right front speaker

)

231

564

VFP

10/0 +10

100+ TV RETURN

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

DIMMER

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

PROGRESSIVE

DVD AUDIO/VIDEO RECEIVER

Relation between Surround modes and adjustable items

TEST CENTER REAR•L REAR•R SUBWOOFER EFFECT

Dolby Digital 䡬䡬䡬䡬䡬⳯

DTS Digital Surround 䡬䡬䡬䡬䡬⳯

Dolby Pro Logic II 䡬䡬䡬䡬䡬⳯

DAP 䡬⳯䡬䡬䡬䡬

All Channel Stereo 䡬䡬䡬䡬䡬⳯

Note:

•You cannot adjust the speakers which are not used by the selected Surround mode.

Item

Mode

䡬: Possible ⳯: Impossible

EN25-28RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM28

DVD Player Operations

Disc Information

7Playable Disc Types

This unit has been designed to play back the following discs:

DVD VIDEO, DVD AUDIO, Video CD (VCD), Super Video CD (SVCD), audio CD, CD-R, and CD-RW.

•This unit can also play back MP3 and JPEG files recorded on CD-R and CD-RW. For details about MP3, see “MP3 Disc Playback” on

pages 45 and 46 and about JPEG, see “JPEG Disc Playback” on pages 47 and 48.

•This instruction refers to Video CD as VCD, Super Video CD as SVCD, and audio CD as CD.

Disc Type

Mark (Logo)

•The following discs cannot be played back:

DVD-ROM, DVD-RAM, DVD-RW, CD-ROM, CD-I (CD-I Ready), Photo CD, etc.

Playing back these discs will generate noise and damage the speakers.

•On some DVD VIDEO, DVD AUDIO, VCD, or SVCD, their actual operations may be different from what is explained in this manual. This

is due to the disc programming and disc structure, but not a malfunction of this unit.

•You can play back DVD-R recorded with the DVD VIDEO format, but some may not be played back because of the disc characteristics or

recording conditions.

Discs you can play:

DVD VIDEO DVD AUDIO VCD SVCD CD CD-R CD-RW

COMPACT

DIGITAL AUDIO

Notes on CD-R and CD-RW

•User-edited CD-R (Recordable) and CD-RW (ReWritable) can

be played back only if they are already “finalized.”

•The unit can play back CD-R or CD-RW recorded on a

personal computer if they have been recorded in the audio CD

format.

The unit can also play back CD-R or CD-RW if MP3 files or

JPEG files are recorded on them.

However, they may not be played back because of their disc

characteristics, recording conditions, or damage or stain on

them. Especially, the configuration and characteristics of an

MP3 disc or a JPEG disc is determined by the writing

(encoding) software and hardware used for recording.

Therefore, due to the software and hardware used, the

following symptoms may occur:

–Some discs may not be played back.

–Some tracks on an MP3 disc are skipped and may not be

played back normally.

–Some files on a JPEG disc may be played back distortedly.

•Before playing back CD-R or CD-RW, read their instructions

or cautions carefully.

•CD-RW may require a longer readout time. It is caused by the

fact that the reflectance of CD-RW is lower than for regular

audio CD.

Note on Region Code

DVD players and DVD VIDEO have their own Region Code

numbers. This unit can play back only DVD VIDEO recorded

with the color system of NTSC whose Region Code numbers

include “1.”

If a DVD VIDEO with the wrong Region Code numbers is

loaded, “REGION CODE ERROR!” appears on the TV and

playback cannot start.

IMPORTANT : Before playing a disc, make sure of the

following...

•Check the connection with the TV.

•Turn on the TV and select the correct input mode on the TV to

view the pictures or on-screen indications on the TV screen.

•For disc playback, you can change the initial setting to your

preference. (See pages 49 to 57.)

If “” appears on the TV screen when you press a button,

the disc cannot accept an operation you have tried to do, or

data required for that operation is not recorded on the disc.

NOTICE : In some cases, without showing “”, operations

will not be accepted.

Ex. :

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM29

7Disc structure

DVD VIDEO consists of “titles,” and each title may be divided into

some “chapters” (see Example 1).

For example, if DVD VIDEO contains some movies, each movie

may have its own title number and it may be further divided into

some chapters. In DVD VIDEO Karaoke, each song may have its

own title number, but it may not be further divided into chapters.

DVD AUDIO consists of “groups,” and each group may be divided

into some “tracks” (see Example 2).

Some DVD AUDIO also contain a “bonus group” that can be played

back by entering the “key number” (a kind of password). Usually

the contents of “bonus group” are not opened to the public.

Note that most DVD AUDIO include other information in addition

to audio, such as still pictures, movies, and text.

VCD, SVCD, and CD consist of “tracks” (see Example 3).

In general, each track has its own track number. (On some discs,

each track may also be divided by Indexes. This unit is not

compatible with Index function.)

Example 1: DVD VIDEO

DVD Player Operations

7Playback Control function (PBC)

The Playback Control function allows you to enjoy menu-driven

operation.

Menu-driven playback

A selection menu is displayed when you start playing VCD and

SVCD with the Playback Control feature. The selection menu shows

a list of numbers for selection. Some discs may show moving

pictures or a divided screen.

You can interact with the screen using a menu display to select and

play an entry.

See the example illustration on the right about basic feature of

menu-driven playback (for details about the operation through the

menu, see also page 33).

Note:

•While operating VCD or SVCD using the menu, some of the

functions such as repeat play may not work.

Example 2: DVD AUDIO

Example 3 : VCD/SVCD/CD

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM30

8.5Mbps

DVD-VIDEO

TITLE 14 TOTAL

1:25:58

CHAP 23

8.5Mbps

DVD-VIDEO

TITLE

TOTAL

1:25:58

CHAP

8.5Mbps TITLE

TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

DVD-VIDEO

This section explains advanced operations of the built-in DVD player using the remote control. For MP3 playback, see pages 45 and 46, and

for JPEG playback, see pages 47 and 48.

Before using the remote control, press DVD so that “DVD” appears on the operation mode display.

•See also “Basic DVD Player Operations” on pages 15 and 16.

•

DVD

AUDIO

SUPER

VCD

VIDEO

DVD

VIDEO

show which types of disc are available for the operation.

•Turn on your TV and select the correct input mode on the TV.

If “” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do, or data required for

that operation is not recorded on the disc.

DVD Player Operations

Using the On-screen Bar

You can check the information of a disc while the disc is loaded and

use some functions through the on-screen bar.

&Whenever a disc is loaded

Press ON SCREEN.

•Each time you press the button, the on-screen bar changes as

shown to the right:

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

The on-screen bar goes off.

(back to the beginning)

Ex. : When a DVD VIDEO is played

(with the pull-down menu)

Contents of the on-screen bar with the pull-down menu

8.5Mbps

TITLE

TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME

CHAP.

DVD-VIDEO

Ex.: When a DVD VIDEO is played

1Disc type

2Playback information

Indications Meanings Available discs

Mbps shows the current

transfer rate (Megabits

per second).

TITLE

shows the current title.

CHAP

shows the current

chapter.

shows the current

group.

TRACK

shows the current

track.

TOTAL

1:25:58

shows the elapsed

playing time.

3Playback conditions for all types of disc

Indications Meanings

Playback

/Fast forward/Fast reverse

/Forward/reverse slow-motion

Pause

Stop

All discs

GROUP 1

All discs

TRACK

4Operation icons (on the pull-down menu)

Indications

Meanings Available discs

TIME

Select this to change the

time indication.

See page 32.

OFF

Select this to repeat

playback. See page 42.

Select this for time search.

See page 37.

CHAP.

Select this for chapter

search. See page 37.

Select this for track

search. See page 37.

1/3

Select this to change the

audio language or channel.

See pages 35 and 36.

1/3

Select this to change

subtitle language.

See page 35.

1/3

Select this to change the

view angle. See page 34.

Select this to change the

page. See page 44.

PROG.

Select this for the program

play. See page 41.

RND.

Select this for the random

play. See page 41.

PAGE 1/15

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM31

Changing the Time Indication

You can change the time information in the on-screen bar and the

display window on the center unit.

&During playback or while

stopped

Press ON SCREEN twice.

The on-screen bar appears on the TV.

Press cursor 3 (or 2) to move to

TIME

Press ENTER.

•Each time you press the button, the time indication changes as

follows:

TOTAL ] T. (total) REM ] TIME ] REM ]

(back to the beginning)

TOTAL : Elapsed time of the disc

T. REM : Remaining time of the disc

TIME : Elapsed playing time of the current chapter/track

REM : Remaining time of the current chapter/track

To turn off the on-screen bar

Press ON SCREEN.

Notes:

•The time indication in the on-screen bar changes as follows:

EX. :

TOTAL

1:25:58

]

T.REM

0:45:41

]

TIME

0:25:58

]

REM

0:18:14

] (back to the beginning)

The indication on the display also changes.

•While playing VCD, SVCD, or CD, the indication of the hour digit

does not appear.

Basic Operation through the On-screen

Bar

Ex. : When selecting the repeat mode for DVD VIDEO

&During playback or while

stopped

Press ON SCREEN twice.

The on-screen bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

OFF

on the pull-down menu.

Press ENTER.

The pop-up window appears under the pull-down menu.

Press cursor ∞ (or 5) to select the desired option

in the pop-up window.

•Each time you press the button, the options change.

Press ENTER.

The setting changes and the pop-up window goes off.

To turn off the on-screen bar

Press ON SCREEN.

Note:

•See the pages for the detail of each function.

DVD Player Operations

8.5Mbps

DVD-VIDEO

TITLE

14 TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

8.5Mbps

DVD-VIDEO

TITLE

14 TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

8.5Mbps

DVD-VIDEO

TITLE

TOTAL

1:25:58

CHAP

1/3 1/3 1/3

TIME CHAP.

OFF

8.5Mbps

DVD-VIDEO

TITLE

TOTAL

1:25:58

CHAP

1/3 1/3 1/3

TIME CHAP.

TITLE

8.5Mbps

DVD-VIDEO

TITLE

TOTAL

1:25:58

CHAP

TITLE

1/3 1/3 1/3

TIME CHAP.

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM32

Locating a Desired Scene from

the Disc Menu

Using the disc menu, you can start playing a title, chapter, or track

you specify.

If the on-screen bar is shown on the TV, press ON SCREEN

repeatedly to go off the on-screen bar.

7From the DVD menu

DVD VIDEO and DVD AUDIO generally have their own menus

which show the disc contents. These menus contain various items

such as titles of movies, names of songs, or artist information, and

display them on the TV screen. You can locate a desired scene by

using these menus.

&When DVD VIDEO/

DVD AUDIO is loaded

Press TOP MENU or MENU.

The DVD menu appears on the TV. (The menu usually appears

on the TV automatically after loading the disc.)

Ex. :

DVD VIDEO/DVD AUDIO normally has a “top” menu when it

contains more than one title/group. In this case, press

TOP MENU to show the title menu.

Some DVD VIDEO/DVD AUDIO may also have a different

menu which is shown by pressing the MENU button.

See the instructions of each DVD VIDEO/DVD AUDIO for its

particular menu.

Use cursor 5/∞/3/2 to select a desired item,

then press ENTER.

The unit starts playback of the selected item.

•With some discs, you can also select items by entering the

corresponding number using number buttons.

7From the VCD/SVCD menu with PBC

VCD or SVCD recorded with PBC has its own menus such as a list

of the tracks. (After loading such a disc, “PBC” appears on the

display.) You can locate the specific track by using the menu (see

also page 30).

•Before using the remote control, press DVD to change the

remote control operation mode.

&When the menu appears on

the TV during playback

with PBC

Press number buttons (1–10, +10) to select the

number of the desired item.

The unit starts playback from the selected item.

Ex. : To select 3, press 3.

To select 11, press +10, then 1.

Ex. :

To return to the menu

Press RETURN.

When “NEXT” or “PREVIOUS” is shown on the TV screen:

To go to the next page, press ¢.

To return to the previous page, press 4.

To play back PBC-compatible VCD/SVCD without PBC

Start playback by pressing the number buttons while playback is

stopped.

The elapsed playing time appears on the display instead of “PBC.”

To restore PBC

Press TOP MENU or MENU.

“PBC” appears again on the display.

DVD Player Operations

About indication on the display while playing back a VCD/SVCD

While you are playing back a VCD/SVCD recorded with PBC, playback information appears on the display as follows:

Ex. : When VCD is played back using PBC Ex. : When VCD is played back without using PBC

SPK.

DIGITAL AUTO DSP

VOLUME

SUBWFR

Track number Elapsed playing time

SPK.

DIGITAL AUTO DSP

VOLUME

SUBWFR

Track number

123

231

564

VFP

10/0 +10

100+ TV RETURN

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

PROGRESSIVE

CENTER

REAR·L

REAR·R

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM33

Selecting a View Angle—ANGLE

While playing back DVD VIDEO/DVD AUDIO containing multi-

view angles, you can enjoy the same scene at different angles.

The icon appears at the beginning of playback when the current

scene has multi-view angles.

7Selecting a view angle

&During playback

Press ANGLE.

The following pop-up window appears on the TV.

Ex. : The first view angle is selected out of 3 view angles

recorded.

Press ANGLE repeatedly to select the desired

view angle.

•Each time you press the button, the angle of the scene

changes.

Ex.: 1/3 ] 2/3 ] 3/3 ] (back to the beginning)

The pop-up window goes off if no operation is done for about

5 seconds.

Using the on-screen bar:

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the pull-down menu, then press

ENTER.

The following pop-up window appears under the pull-down

menu.

Ex. : The first view angle is selected out of 3 view angles

recorded.

Press cursor ∞ (or 5) repeatedly to select the

desired view angle.

•Each time you press the button, the angle of the scene

changes.

Press ENTER.

The pop-up window goes off.

To turn off the on-screen bar

Press ON SCREEN.

7Showing all view angles on the TV

&During playback

Press and hold ANGLE for a few seconds.

Up to 9 pictures of the different camera angles recorded on a

disc appear on the TV screen.

Ex. : When 3 view angles are recorded.

Press cursor 5/∞/3/2 repeatedly to move to

the desired view.

Press ENTER.

The angle list goes off, and playback starts at the selected view

angle.

Notes:

•While the angle list is shown on the TV, you cannot listen to the

sound.

•If “ ” appears on the TV, the current scene does not contain

multi-view angles.

Angle list

Selected picture

1/3

2/3

3/3

8.5Mbps

DVD-VIDEO

TITLE

TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

DVD Player Operations

–

VFP

10/0 +10

100+ TV RETURN

SUBTITLE

ANGLE

ZOOM

PAGE

SURR MODE

DIMMER

MUTING TV VOL VOLUME

–

SUBWOOFER

PROGRESSIVE

–

VFP

10/0 +10

100+ TV RETURN

SUBTITLE

CHOICE

ENTER

ON SCREEN

ANGLE

ZOOM

PAGE

DIGEST TOP MENU MENU

RETURN

SURR MODE

DIMMER

MUTING TV VOL VOLUME

–

SUBWOOFER

PROGRESSIVE

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM34

DVD Player Operations

Changing the Languages—SUBTITLE and

AUDIO

While playing back DVD VIDEO/DVD AUDIO/SVCD containing

subtitles in different languages, you can select the subtitle language

to be displayed on the TV.

The icon appears at the beginning of playback when the current

scene has plural subtitles.

When DVD VIDEO/DVD AUDIO contains audio languages

(soundtrack), you can select the language (soundtrack) to listen to.

The icon appears at the beginning of playback when the current

scene has plural audio languages.

• You can also select the audio channel(s) of VCD or SVCD.

7Selecting the subtitle language

&During playback

Press SUBTITLE.

The following pop-up window appears on the TV.

Ex. : “ENGLISH” is selected among 3 subtitle languages

recorded.

Press SUBTITLE repeatedly to select the desired

subtitle language.

• Each time you press the button, the subtitle language changes.

The pop-up window goes off if no operation is done for about

5 seconds.

Using the on-screen bar:

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the pull-down menu, then press

ENTER.

The following pop-up window appears under the pull-down

menu.

Ex. : “ENGLISH” is selected among 3 subtitle languages

recorded.

Press cursor ∞ (or 5) repeatedly to select the

desired subtitle language.

•Each time you press the button, the subtitle language changes.

Press ENTER.

The pop-up window goes off.

To turn off the on-screen bar

Press ON SCREEN.

Notes:

• For DVD VIDEO/DVD AUDIO: Some subtitle languages are

abbreviated in the pop-up window. See “Language code list” on

page 52.

• For SVCD: SVCD can contain up to four subtitles. Pressing

SUBTITLE changes the subtitles regardless of whether the

subtitles are recorded or not. (Subtitles will not change if no subtitle

is recorded.)

• If “ ” appears on the TV, the current scene does not contain

plural subtitles.

7Selecting the audio language

&During playback

Press AUDIO.

The following pop-up window appears on the TV.

Ex. : “ENGLISH” is selected among 3 audio languages

recorded.

Press AUDIO repeatedly to select the desired

audio language.

•Each time you press the button, the audio language changes.

The pop-up window goes off if no operation is done for about

5 seconds.

Using the on-screen bar:

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the pull-down menu, then press

ENTER.

The following pop-up window appears under the pull-down

menu.

Ex. : “ENGLISH” is selected among 3 audio languages

recorded.

ENGLISH

1/3

8.5Mbps

DVD-VIDEO

TITLE

TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

ENGLISH

8.5Mbps

DVD-VIDEO

TITLE

14 TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

ENGLISH

1/3

897

VFP

10/0 +10

100+ TV RETURN

AUDIO

SUBTITLE

ANGLE

SURR ON/OFF

SURR MODE

DIMMER

–

SUBWOOFER

PROGRESSIVE

REAR·R

564

VFP

10/0 +10

100+ TV RETURN

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

DIMMER

–

SUBWOOFER

PROGRESSIVE

REAR·L

REAR·R

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 6:47 PM35

Press cursor ∞ (or 5) repeatedly to select the

desired audio language.

•Each time you press the button, the audio language changes.

Press ENTER.

The pop-up window goes off.

To turn off the on-screen bar

Press ON SCREEN.

Notes:

•Some audio languages are abbreviated in the pop-up window. See

“Language code list” on page 52.

•If “ ” appears on the TV, the current scene does not contain

plural audio languages.

7Selecting the audio channel

When playing back some Karaoke VCDs or SVCDs, you can enjoy

Karaoke by selecting the audio channel to play.

&During playback

Press AUDIO.

The following pop-up window appears on the TV.

Ex. : “ST” (stereo) is selected.

Press AUDIO repeatedly to select the desired

audio channel.

•Each time you press the button, the audio channel changes.

For VCD:

Ex. :

ST ] L ] R ] (back to the beginning)

ST : To listen to normal stereo playback.

L:To listen to the L (left) audio channel.

R:To listen to the R (right) audio channel.

For SVCD:

Ex. :

ST 1 ] ST 2 ] L 1 ] R 1 ] L 2 ] R 2 ]

(back to the beginning)

ST 1/ST 2 : To listen to normal stereo playback of ST 1 or

ST 2 channel.

L 1/L 2 : To listen to the L (left) 1 or 2 audio channel.

R 1/R 2 : To listen to the R (right) 1 or 2 audio channel.

The pop-up window goes off if no operation is done for about

5 seconds.

Using the on-screen bar:

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the pull-down menu, then press

ENTER.

The following pop-up window appears under the pull-down

menu.

Ex. : “ST” (stereo) is selected.

Press cursor ∞ (or 5) repeatedly to select the

desired audio channel(s).

•Each time you press the button, the audio channels change.

Press ENTER.

The pop-up window goes off.

To turn off the on-screen bar

Press ON SCREEN.

DVD Player Operations

VCD

TRACK

TIME

25:58

OFF

TIME

RND.PROG.

564

VFP

10/0 +10

100+ TV RETURN

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

PROGRESSIVE

REAR·L

REAR·R

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM36

Playing from a Specified Position on a Disc

You can start playing a title, chapter, or track you specify.

You can also play a disc from the specified time.

7Locating a desired chapter/track

—Chapter/Track Search

When playing back DVD VIDEO/DVD AUDIO, you can search for

the chapter/track number to be played.

•Before using the remote control, press DVD to change the

remote control operation mode.

&During playback

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

CHAP.

TRACK

in the pull-down menu, then

press ENTER.

The following pop-up window appears under the pull-down

menu.

Ex. : When DVD VIDEO is loaded.

Ex. : When DVD AUDIO is loaded.

Press the number buttons (0–9) to enter the

desired chapter/track number.

Ex. : To select chapter/track number 8, press 8.

To select chapter/track number 10, press 1 then 0.

To select chapter/track number 37, press 3 then 7.

•To correct a misentry

Repeat step

until the desired number appears in the pop-up

window.

Press ENTER.

The unit starts playback from the selected chapter/track.

To turn off the on-screen bar

Press ON SCREEN.

Notes:

•The 10/0 button works as the 0 button in this function.

•The +10 button is not used in this function.

•You can select up to the 99th chapter/track.

DVD Player Operations

7Locating a desired position—Time Search

You can start playing at your desired position by specifying the

elapsed playing time from the beginning of the current title up to

“9:59:59” (for DVD VIDEO/DVD AUDIO), or from the beginning

of the disc up to “99:59” (for VCD/SVCD/CD).

•Before using the remote control, press DVD to change the

remote control operation mode.

&For DVD VIDEO:

During playback

For VCD/SVCD:

While stopped or during

playback without PBC

For DVD AUDIO/CD:

While stopped or during

playback

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the pull-down menu, then press ENTER.

The following pop-up window appears under the pull-down

menu.

Use the number buttons (0–9) to enter the time.

Ex. : To play back from a point of 1 (hours): 02 (minutes): 49

(seconds) from the beginning

•To correct a misentry

Press cursor 2 repeatedly until the wrong number is erased,

then press the number buttons to enter the correct number.

Press ENTER.

The unit starts playback from the specified time.

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

231

564

VFP

10/0+10

100+ TV RETURN

EFFECT

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

8.5Mbps

DVD-VIDEO

TITLE 14 TOTAL

1:25:58

CHAP 23

OFF

1/3 1/3 1/3

TIME CHAP.

TIME _ : _ _ : _ _

Press 1

Press 0

Press 2

Press 4

Press 9

231

564

VFP

10/0+10

100+ TV RETURN

EFFECT

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

8.5Mbps

DVD-VIDEO

TITLE

14 TOTAL

1:25:58

CHAP

OFF

1/3 1/3 1/3

TIME CHAP.

CHAPTER _

TRACK _

8.5Mbps

DVD-AUDIO

GROUP

TIME

1:25:58

TRACK

OFF

1/3

TIME TRACK PROG. RND

PAGE 1/3

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM37

Press cursor 5/∞/3/2 to move to the desired

scene.

•If there are more than 9 scenes, the digest screen will have

more than one page.

To show other pages of the digest screen

To display the previous page, select the left top scene,

then press cursor 2.

To display the next page, select the right bottom scene,

then press cursor 3.

Press ¢ to display the next page.

Press 4 to display the previous page.

Press ENTER.

The unit starts playback from the selected scene.

Note:

•For some discs, it may take some time before all the scenes appear

on the TV screen.

To turn off the on-screen bar

Press ON SCREEN.

Notes:

•The 10/0 button works as the 0 button in this function.

•The +10 button is not used in this function.

•You can specify the time in hours/minutes/seconds for DVD VIDEO/

DVD AUDIO, and in minutes/seconds for VCD/SVCD/CD.

7Locating a desired scene—DIGEST

The unit can display the opening scenes of each title or chapter on

DVD VIDEO or each track of a VCD/SVCD.

You can select a desired title, chapter, or track from the opening

scenes shown on the TV screen.

&For DVD VIDEO:

While stopped or during

playback

For VCD/SVCD:

While stopped or during

playback without PBC

Press DIGEST.

Up to 9 opening scenes are displayed.

•While DVD VIDEO is stopped :

The opening scenes of each title appear on the TV screen.

•During DVD VIDEO playback :

The opening scenes of each chapter in the current title appear

on the TV screen.

•When VCD or SVCD is loaded :

The opening scenes of each track appear on the TV screen.

DVD Player Operations

Selected scene

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM38

DVD Player Operations

Special Picture Playback

This unit provides special picture playback functions including

frame-by-frame, strobe, slow-motion, and zoom.

7Frame-by-frame playback

•Before using the remote control, press DVD to change the

remote control operation mode.

&During playback

Press 8 (STROBE) repeatedly.

•Each time you press the button, the still picture advances to the

next frame.

To return to normal playback

Press 3.

Note:

•You can also perform the above operation using

on the front panel.

7Showing continuous still pictures—STROBE

•Before using the remote control, press DVD to change the

remote control operation mode.

&During playback

Press STROBE (8) at the point you want to view

as continuous pictures.

Playback pauses.

Press and hold STROBE (8) for a few seconds.

The same 9 frames (still pictures) appear on the TV screen.

You can advance the frames one by one in the following step.

Press STROBE (8) once.

The picture in the middle on the top row shows an advanced

frame from the one on the left.

•Pressing the button repeatedly advances the frames one by one.

•Pressing 3 instead of STROBE (8) advances each frame at

normal playback speed with a time delay over the all 9 frames.

(The sound is muted.)

To return to the normal screen

Press and hold STROBE (8) for a few seconds.

Notes:

•If you press and hold STROBE (

) for a few seconds during

playback, 9 still pictures also appear but they advance in normal

playback speed with a time delay. (The sound is muted.)

•You can also perform the above operation using

on the front panel.

7Playing back in slow-motion

•Before using the remote control, press DVD to change the

remote control operation mode.

&During playback

Press 8 (STROBE) at the point where you want

to start playback in slow-motion.

Playback pauses.

Press and hold ¢ or 4.

To play back in forward slow-motion, press and hold ¢.

To play back in reverse slow-motion (for DVD VIDEO only),

press and hold 4.

•Each time you press and hold the button, the playback speed

changes as follows:

Forward:

1/32

]

1/16

]

1/8

]

1/4

]

1/2

Reverse (for DVD VIDEO only):

1/32

]

1/16

]

1/8

]

1/4

]

1/2

To pause slow-motion playback

Press 8 (STROBE).

To return to normal playback

Press 3.

Note:

•You cannot listen to the sound during slow-motion playback.

7Zooming in—ZOOM

&During playback or while

paused

Press ZOOM.

•Each time you press the button, the magnification changes as

follows:

x 2 ] x 4 ] x 8 ] x 16 ] x 32 ] x 64 ] x 128 ]

x 256 ] x 512 ] x 1024

Advanced frame

TV/VIDEO REW/(TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

– TV/DBS CH +

231

TV/VIDEO REW/(TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

CONTROL

CENTER

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

– TV/DBS CH +

–

––

CHOICE

ENTER

ON SCREEN

ZOOM

PAGE

DIGEST TOP MENU MENU

RETURN

MUTING TV VOL VOLUME

ZOOM x4

Ex. : When x4 zoom is selected

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:52 AM39

To move the zoomed-in position

Press cursor 5/∞/3/2.

To return to normal playback

Press ENTER.

Note:

•While being zoomed in, the picture may look coarse.

7Changing the VFP setting—VFP

The VFP (Video Fine Processor) function enables you to

adjust the picture based on the picture tone, or personal preference.

•There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step

again.

•Before using the remote control, press DVD to change the

remote control operation mode.

&During playback

Press VFP.

The current VFP setting screen appears on the TV.

Press cursor 3 (or 2) repeatedly to select the

VFP mode.

•Each time you press the button, the VFP mode changes as

follows.

NORMAL “ CINEMA “ USER1 “ USER2 “

(back to the beginning)

NORMAL : Normally select this.

CINEMA : Suitable for a movie source.

USER1 and USER2 : You can adjust parameters that affect

the appearance of picture and store the

settings (see the right).

To turn off the VFP setting screen

Press VFP.

To adjust the appearance of the picture

When selecting “USER1” or “USER2,” you can adjust the

appearance of picture.

Press VFP, then press cursor 3 (or 2) repeatedly

to select “USER1” or “USER2.”

Press cursor ∞ (or 5) repeatedly to select a

parameter you want to adjust.

Adjust gradually to show preferable appearance by confirming

the picture.

GAMMA : Controls the brightness of neutral tints

while maintaining the brightness of dark

and bright portions (–4 to +4).

BRIGHTNESS : Controls the brightness of the screen

(–16 to +16).

CONTRAST : Controls the contrast of the screen

(–16 to +16).

SATURATION : Controls the color depth of the screen

(–16 to +16).

TINT : Controls the tint of the screen

(–16 to +16).

SHARPNESS : Controls the sharpness of the screen

(+0 to +3).

Y DELAY : Controls the color gap of the screen

(–2 to +2).

Press ENTER.

The VFP setting screen disappears and the following pop-up

window appears on the TV.

Press cursor ∞ (or 5) repeatedly to change the

setting, then press ENTER.

The current VFP setting screen appears again.

Repeat steps

to adjust other parameters.

To turn off the VFP setting screen

Press VFP.

To activate your setting

Press VFP, then press cursor 3 (or 2) repeatedly to select

“USER1” or “USER2.”

Note:

•The VFP setting screen disappears if no operations are done for

more than about 10 seconds.

DVD Player Operations

ZOOM x4

Ex. : When “GAMMA” is selected

USER1

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

Y DELAY

GAMMA

NORMAL

GAMMA

BRIGHTNESS

CONTRAST

SATURATION

TINT

SHARPNESS

Y DELAY

Ex. : When “NORMAL” is selected

–

VFP

10/0 +10

100+ TV RETURN

SUBTITLE

CHOICE

ENTER

ON SCREEN

ANGLE

ZOOM

PAGE

DIGEST TOP MENU MENU

RETURN

SURR MODE

DIMMER

MUTING TV VOL VOLUME

–

SUBWOOFER

PROGRESSIVE

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM40

Program Playback and Random Playback

You can play tracks on DVD AUDIO/VCD/SVCD/CD in the desired

order or in the random order.

•You cannot use Resume play for the program or random playback.

7Playing back in the desired order

You can play up to 99 tracks in the desired order.

•You may program the same tracks more than once.

•Before using the remote control, press DVD to change the

remote control operation mode.

&While stopped

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

PROG.

in the on-screen bar, then press ENTER.

The program screen appears on the TV and the PROGRAM

indicator lights up on the display.

•10 steps appear at a time on the program screen.

Press the number buttons (1–10, +10) to enter a

track/group you want to program.

Ex. : To select the track/group number 3, press 3.

To select the track/group number 14, press +10 then 4.

To select the track/group number 40, press +10, +10, +10

then 10.

•For DVD AUDIO ONLY: Enter a group number and a track

number in order.

•When you enter a track/group number that does not exist on

the loaded disc, your entry is ignored.

•The total program time is shown at the top of the program

screen on the display.

Repeat step

to program the next steps.

•Each time you enter a track number in the step at the bottom

of the program screen, the next steps appear.

DVD Player Operations

231

564

VFP

10/0 +10

100+ TV RETURN

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

PROGRESSIVE

CENTER

REAR·L

REAR·R

Press 3.

Playback starts in the programmed order.

To erase a step

Press cursor 5 (or ∞) to move to the desired step, then press 7.

•To program the next steps again, press cursor ∞ repeatedly to

move to the blank step, then repeat step

To stop the program playback

Press 7.

•When VCD or SVCD is played back, the program screen appears

again.

•To edit your program, repeat steps

and

To cancel the program playback mode

Clear the program you made as follows:

1Press 7 to stop playback.

2Press ON SCREEN to turn on the on-screen bar.

3Press 7.

•You can also clear the program by ejecting the disc or turning off

the unit.

To turn off the on-screen bar

Press ON SCREEN.

Note:

•When all the programmed tracks have been played, the program

playback stops.

7Playing back tracks in random order

&While stopped

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

RND.

in the on-screen bar, then press ENTER.

The RANDOM indicator lights up on the display and playback

starts in random order.

To stop the random playback

Press 7.

The random playback is canceled.

•When all tracks have been played once, the random playback is

also canceled.

Notes:

•The same track will not be played more than once during the

random playback.

•During the random playback, you can skip back to the beginning of

the current track by pressing

, but cannot skip back to the tracks

that have been played.

•During the random playback, pressing ENTER with

RND.

selected

in the on-screen bar cancels the random playback and continues

playback in the normal order.

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

PROGRAM

No.

Group Track

Total Program Time 00:00:00 PROGRAM

No.

Total Program Time 00:00:00

For DVD AUDIO: For VCD/SVCD/CD:

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

PROGRAM

No.

2–3

Total Program Time 00:04:14

Group Track

PROGRAM

No.

Total Program Time 00:04:14

For DVD AUDIO: For VCD/SVCD/CD:

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM41

Repeat Playback

You can repeat playback of the current title or chapter (for DVD

VIDEO), group or track (for DVD AUDIO), or track (for VCD/

SVCD/CD).

You can also repeat playback of a desired portion.

7Repeating a current title, group, chapter, or

all tracks

&For DVD VIDEO:

During playback

For VCD/SVCD:

During playback or while

stopped without PBC

For DVD AUDIO/CD:

During playback or while

stopped

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the on-screen bar, then press ENTER.

The following pop-up window appears under the on-screen bar.

Press cursor ∞ (or 5) repeatedly to select the

repeat mode, then press ENTER.

•Each time you press cursor ∞ (or 5), the repeat mode changes

as follows:

For DVD VIDEO:

CHAPTER “ TITLE “ A-B “ OFF “

(back to the beginning)

For DVD AUDIO/VCD/SVCD/CD:

TRACK “ ALL/GROUP “ A-B “ OFF “

(back to the beginning)

CHAPTER : Repeats the current chapter (the REPEAT 1

indicator lights up on the display)

TRACK : Repeats the current track (the REPEAT 1

indicator lights up on the display)

TITLE : Repeats the current title (the REPEAT

indicator lights up on the display)

ALL/GROUP

:Repeats all the tracks on the disc, in the

group, or of the program (the REPEAT

indicator lights up on the display)

A-B : Repeats a desired portion (see the right

column)

OFF : Select this to cancel the repeat mode

•You can directly change the repeat mode (except

A-B) for the current chapter, title, track, or disc by

pressing REPEAT on the remote control.

DVD Player Operations

8.5Mbps

DVD-VIDEO

TITLE

14 TOTAL1:25:58

CHAP

1/3 1/3 1/3

TIME CHAP.

OFF

7Repeating a desired part

You can repeat playback of a desired portion by specifying the

beginning (point A) and the ending (point B).

&During playback

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

in the on-screen bar, then press ENTER.

The following pop-up window appears under the on-screen bar.

Press cursor ∞ (or 5) repeatedly to select “A-B.”

Press ENTER at the beginning of the portion you

want to repeat (point A).

The following display appears in the on-screen bar.

The REPEAT A indicator also lights up on the display.

Press ENTER at the end of the portion you want

to repeat (point B).

A-B repeat playback starts. The selected part of the disc

(between point A and B) is played repeatedly.

During repeat A-B playback, the REPEAT A-B indicator lights

up on the display.

To turn off the on-screen bar

Press ON SCREEN.

To cancel the A-B repeat playback

Select “OFF” in step

, then press ENTER.

Note:

•While playing back DVD VIDEO, A-B repeat playback is possible

only within the same title.

8.5Mbps

DVD-VIDEO

TITLE

14 TOTAL1:25:58

CHAP

1/3 1/3 1/3

TIME CHAP.

OFF

Notes:

•If you select “ALL” during random playback, the all tracks of the

disc are played repeatedly in random order.

•“A-B” cannot be selected during the program and random

playback or while a disc is not played back.

To turn off the on-screen bar

Press ON SCREEN.

To cancel the repeat playback

Select “OFF” in step

, then press ENTER.

8.5Mbps TITLE

TOTAL

1:25:58

CHAP

A -

1/3 1/3 1/3

TIME CHAP.

DVD-VIDEO

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

– TV/DBS CH +

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

REPEAT

Point A Point B

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

EN29-42RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM42

Notes:

•When playing back DVD AUDIO, you cannot select the following

Surround modes:

– Pro Logic II,

– DAP modes, and

– All Channel Stereo.

•For the multichannel track which can be mixed down:

When “NONE” is selected as the speaker setting for the center or

rear speakers, the current multichannel track is mixed down to the

front speaker channels.

•For the multichannel track which cannot be mixed down:

–When you try to deactivate Surround mode during playback,

“MULTI CH” appears on the display and Surround mode still

remains.

–When you start playback with Surround mode deactivated, “LR

ONLY” appears on the display. In this case, you cannot listen to

the sounds other than left and right front channels.

Special Playback for DVD AUDIO

7Selecting the group

&Whenever a disc is loaded

Press CONTROL repeatedly so that “GROUP”

appears on the operation mode display, then press

GROUP 9 or ( to select the desired group.

•You can also select the group by pressing number buttons (1-9).

Note:

•When you select the bonus group, the key number entry indication

appears (see page 44).

Additional Information for DVD AUDIO

7About indication on the front panel

The unit has various indications for DVD AUDIO.

•When DVD AUDIO is loaded

The DVD AUDIO lamp lights up on the front panel.

•When playing back DVD AUDIO

The following indications appear on the display.

1 B.S.P (Browsable Still Picture) indicator

: Lights when you play back still pictures.

See “Selecting a still picture” on page 44.

2 BONUS indicator : Lights when the loaded DVD AUDIO has

a bonus group. See “Playing back a bonus

group” on page 44.

3 Group indication : Shows the current group number. See

“Selecting the group” on this page.

4 Track indication : Shows the current track number.

5 Elapsed playing time

7Activating Surround mode

When playing back the high-resolution multichannel sound, you can

activate Surround mode manually.

•When Auto surround is set to “ON,” Surround mode is activated

automatically for the multichannel sound.

&During playback

Press CONTROL repeatedly so that “SOUND”

appears on the operation mode display, then press

SURR ON/OFF.

•Each time you press SURR ON/OFF, Surround mode is activated

or deactivated alternately.

•You can also use the SURROUND ON/OFF button on the front

panel to activate or deactivate Surround mode.

DVD Player Operations

DVD AUDIO

INPUT ATT.

INPUT

ANALOG/DIGITAL

DIGITAL

SURROUND

RX-DV5 HOME THEATER DVD-AUDIO/VIDEO RECEIVER

ON/OFF

SURROUND

MODE

FM/AMTAPE/CDR

SOURCE NAME

TVVCRDBSDVD

STANDBY

STANDBY/ON DVD AUDIO

DIGITAL AUTO

VOLUME

SPK. B.S.P BONUS

LFE

LS RS

LCR

SUBWFR

34 5

231

564

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

DVD AUDIO/VIDEO RECEIVER

231

564

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

DVD AUDIO/VIDEO RECEIVER

EN43-44RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM43

7Selecting a still picture

Most DVD AUDIO include still pictures, which usually appear in

turn automatically during playback according to the playback

sequence.

You can change the picture (turn the page) manually when the

current still picture has selectable pages.

&While the B.S.P indicator

lights up on the display

Press CONTROL repeatedly so that “GROUP”

appears on the operation mode display, then press

PAGE + or – to select the desired page.

Using the on-screen bar:

&While the B.S.P indicator

lights up on the display

Press ON SCREEN repeatedly until the on-screen

bar with pull-down menu appears on the TV.

Press cursor 3 (or 2) repeatedly to move to

PAGE

in the on-screen bar, then press ENTER.

The following pop-up window appears under the on-screen bar.

Press cursor ∞ (or 5) repeatedly to select the

desired page.

To turn off the on-screen bar

Press ON SCREEN.

7Playing back a bonus group

Some DVD AUDIO have a special group called “bonus group”

whose contents are not opened to the public. The bonus group is

always assigned to the last group of a disc (for example, if a disc

contains 4 groups including a bonus group, “group 4” is the bonus

group).

To play back a bonus group, you have to enter the specific “key

number” (a kind of password) for the bonus group. A way of getting

the key number depends on discs.

After getting the key number, you can play back the bonus group by

the following procedure.

&While the BONUS

indicator lights up

Press CONTROL repeatedly so that “GROUP”

appears on the operation mode display, then

press the number buttons to select a bonus group.

The key number entry indication appears as follows:

On the TV

On the display

Press DVD on the remote control to change the

remote control operation mode to “DVD.”

Enter the key number using the number buttons

(0-9), then press ENTER.

When you enter the correct key number, the unit starts playing

back the bonus group and the BONUS indicator goes off.

•If you enter the wrong number, enter the number again.

To turn off the key number entry

Perform one of the following:

•Press 7,

•Open the disc tray, or

•Turn off the unit.

Opening the disc tray or turning off the unit also erases the memory

of the key number, while pressing 7 does not erase the memory.

Notes:

•If you specify a track in the bonus group for the program playback,

the key number entry indication in step

appears for entering the

key number.

•In the random playback mode, tracks in the bonus group are not

played back.

–

231

564

VFP

10/0 +10

100+ TV RETURN

EFFECT

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

ANGLE

ZOOM

DIGEST TOP MENU MENU

SURR ON/OFF

SURR MODE

DIMMER

MUTING

TV VOL VOLUME

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

PAGE

PROGRESSIVE

DVD AUDIO/VIDEO RECEIVER

CHOICE

ON SCREEN

DIGEST

ENTER

TOP MENU MENU

RETURN

8.5Mbps

DVD-AUDIO

GROUP

TIME

1:25:58

TRACK

OFF

1/3

TIME TRACK PROG. RND

PAGE

1/3

DVD Player Operations

SPK. BONUS

DIGITAL AUTO

VOLUME

LFE

AUTO

SURROUND

LRC

LS RS

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

TAPETV CDR FM/AM

231

564

VFP

10/0+10

100+ TV RETURN

EFFECT

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

CHOICE

ON SCREEN

DIGEST

ENTER

TOP MENU MENU

RETURN

KEY _ _ _ _

EN43-44RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM44

Basic Operations

You can also use the buttons on the front panel if they have the

similar names as those on the remote control.

•Before using the remote control, press DVD to change the

remote control operation mode.

7Starting playback

Load an MP3 disc, then press 3.

The unit starts playback. The MP3 CONTROL screen appears on

the TV (see page 46).

When all tracks in a group have been played, the unit plays tracks in

the next group.

7Stopping playback temporarily

Press 8.

To start playback again

Press 3.

7Selecting groups or tracks

To skip groups forward

Press cursor 3.

To skip groups backward

Press cursor 2.

To skip tracks forward

Press ¢ or cursor ∞ as many times as required.

To skip to the beginning of the current track

Press 4 once.

To skip tracks backward

Press 4 or cursor 5 as many times as required.

7Stopping playback completely

Press 7.

MP3 Disc Playback

This unit can play back MP3 files on a CD-R or CD-RW. We call such a disc “MP3 disc” in this instruction.

•Before using the remote control, press DVD to change the remote control operation mode for the MP3 disc operations.

•Turn on your TV and select the correct input mode on the TV.

If “” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do.

What is MP3?

MP3 is an abbreviation of Motion Picture Experts Group 1 (or

MPEG-1) Audio Layer 3. MP3 is simply a file format with a data

compression. By using MP3 format, one CD-R or CD-RW can

contain about 10 times as many songs as a regular CD can.

Disc structure

On an MP3 disc, each song (material) is recorded as a file. Files

are usually grouped into a folder. Folders can also include other

folders, creating hierarchical folder layers.

This unit simplifies the hierarchical construction of a disc and

manages files and folders by “tracks” and “groups.”

This unit can recognize up to 150 tracks per group and up to 99

groups per disc (up to 14,850 tracks in total). Since the unit

ignores the tracks whose numbers are exceeding 150 and the

groups whose numbers are exceeding 99, they cannot be played

back.

•If there are any type of files other than MP3 files in a folder,

those files are also counted in the total file number.

Notes:

•MP3 discs (either CD-R or CD-RW) require a longer readout time

than normal discs. (It depends on the complexity of the folder/file

configuration.)

•When making an MP3 disc, select ISO 9660 Level 1 or Level 2

as the disc format.

•This unit supports “multi-session” discs (up to 5 sessions).

•This unit cannot play “packet write” discs.

•This unit can play MP3 files only with the following file

extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”

•ID3

tags cannot be shown on the display.

An MP3 file can contain file information called “ID3 Tag” where

its album name, performer, track title, etc. are recorded. There

are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3

Tag version 2).

•It is recommended that you make each MP3 file at sampling rate

of 44.1 kHz and at bit rate of 128 kbps. The unit cannot play back

the files made at bit rate of under 64 kbps.

•If both MP3 files and JPEG files are recorded on a disc, set the

MP3/JPEG setting in the PICTURE menu to “MP3.”

(See page 52.)

•Some MP3 discs may not be played back because of their disc

characteristics or recording conditions.

Group 2

Group 1

Group 3 Group 4 Group 5

Track 1 Track 2

Up to 99 groups

Up to 150 tracks

Notes:

•The following functions are not available to MP3 disc playback:

Program playback, random playback, fast-forward/reverse playback,

on-screen bar, and choice menus

•Some tracks on an MP3 disc are skipped and may not be played

back normally.

Current track number

SPK.

DIGITAL AUTO

VOLUME

AUTO

SURROUND

SUBWFR

Current group number Elapsed playing time

(minutes:seconds) of the current

track during playback

VCRDBS DVD

TV/VIDEO REW/(TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

– TV/DBS CH +

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

EN45-48RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM45

Operations through the MP3 CONTROL

Screen

You can search for and play the desired groups and tracks through

the MP3 CONTROL screen shown on TV.

7MP3 CONTROL screen

7Operations

•Before using the remote control, press DVD to change the

remote control operation mode.

To select or skip groups during playback

To select the next groups (or skip groups forward)

Press cursor 3 repeatedly.

To select the previous groups (or skip groups backward)

Press cursor 2 repeatedly.

To select or skip tracks during playback

To select the next tracks (or skip tracks forward)

Press cursor ∞ repeatedly.

To select the previous tracks (or skip tracks backward)

Press cursor 5 repeatedly.

To start playback by specifying a track number

Press the number buttons (1 – 10, +10) to enter the track number.

Ex. : To select the track number 3, press 3.

To select the track number 14, press +10 then 4.

To select the track number 24, press +10, +10, then 4.

To select the track number 110, press +10 ten times, then 10.

The entered number appears in the track number indication, then

playback starts from the specified track.

Repeat Playback

You can repeat playback of the current track, group, or all the tracks

on the loaded disc.

&During playback or while

stopped

From the remote control ONLY:

Press REPEAT.

The repeat indication appears on the MP3 CONTROL screen and

the REPEAT indicator lights up on the display.

•Each time you press the button, the repeat mode changes as

follows:

REPEAT TRACK “ REPEAT GROUP “ REPEAT ALL

“ the indication goes off “ (back to the beginning)

REPEAT TRACK : Repeats the current track

REPEAT GROUP : Repeats the current group

REPEAT ALL : Repeats all the tracks on the disc

To cancel repeat mode

Press REPEAT repeatedly until the repeat indication goes off from

the MP3 CONTROL screen (the REPEAT indicator also goes off

from the display).

Current group number/Total group number

Current

group

Elapsed playing time

of the current track

Current track

Current track number/

Total track number in the current group

(Total track number on the loaded disc)

MP3 CONTROL

Group : 02 / 03

Time : 00:00:14

Track : 05 / 14 (Total 41)

Blue

Red

Green

Cloudy

Fair

Fog

Hail

Indian summer

Rain

Shower

Snow

Thunder

Typhoon

Wind

Winter sky

Notes:

•Some group and track names may not be displayed correctly

because of their recording conditions.

•The order of groups and tracks on an MP3 disc may be displayed

differently from the order displayed on your personal computer.

•Up to 12 groups and tracks are displayed on the TV at a time.

Pressing cursor

∞

repeatedly shows the hidden groups and

tracks one by one.

P3 Disc Playback

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

231

564

VFP

10/0 +10

100+ TV RETURN

EFFECT

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

CONTROL

CENTER

EN45-48RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM46

This unit can play back JPEG files on a CD-R or CD-RW. We call such a disc “JPEG disc” in this instruction.

•Before using the remote control, press DVD to change the remote control operation mode for the JPEG disc operations.

•Turn on your TV and select the correct input mode on the TV.

If “” appears on the TV when you press a button, the disc cannot accept an operation you have tried to do.

JPEG Disc Playback

What is JPEG?

A still-picture data compression system proposed by the Joint

Photographic Expert Group, which features little distortion in

image quality in spite of its high compression ratio.

Disc structure

On a JPEG disc, each still picture (material) is recorded as a file.

Files are usually grouped into a folder. Folders can also include

other folders, creating hierarchical folder layers.

This unit simplifies the hierarchical construction of a disc and

manages folders by “groups.”

This unit can recognize up to 150 files per group and up to 99

groups per disc (up to 14,850 files in total). Since the unit ignores

the files whose numbers are exceeding 150 and the groups whose

numbers are exceeding 99, they cannot be played back.

•If there are any type files other than JPEG files in a folder, those

files are also counted in the total file number.

Notes:

•JPEG discs (either CD-R or CD-RW) require a longer readout

time than normal discs. (It depends on the complexity of the

folder/file configuration.)

•When making a JPEG disc, select ISO 9660 Level 1 or Level 2

as the disc format.

•This unit supports “multi-session” discs (up to 5 sessions).

•This unit cannot play “packet write” discs.

•The unit can play JPEG files only with the following file

extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any uppercase and

lowercase combinations (such as “.Jpg”).

•It is recommended you to record a file at 640 x 480 resolution. (If

a file has been recorded at a resolution of more than 640 x 480,

it will take a longer time to be shown.)

•If both JPEG files and MP3 files are recorded on a disc, set the

MP3/JPEG setting in the PICTURE menu to “JPEG.”

(See page 52.)

•This system can play only baseline JPEG files

. Progressive

JPEG files

or lossless JPEG files

cannot be played.

–Baseline JPEG format: Used for digital cameras, web, etc.

–Progressive JPEG format: Used for web.

–Lossless JPEG format: An old type and rarely used now.

•Some JPEG discs may not be played back because of their disc

characteristics or recording conditions.

Group 2

Group 1

Group 3 Group 4 Group 5

File 1 File 2

Up to 99 groups

Up to 150 files

Slide-show Playback

You can play back the still pictures one after another automatically

—slide-show playback.

You can also use the buttons on the front panel if they have the

similar names as those on the remote control.

•Before using the remote control, press DVD to change the

remote control operation mode.

7Starting slide-show playback

Load a JPEG disc, then press 3.

The slide-show playback starts. Each file (still picture) is shown on

the TV for about 3 seconds, then changed to the next file one after

another.

When all files in a group have been played back, the unit plays back

files in the next group.

7Stopping slide-show playback temporarily

Press 8.

You can zoom in on the still picture (see page 48).

To start slide-show playback again

Press 3.

7To start the slide-show playback by

specifying a file number

Press the number buttons (1 – 10, +10) to enter the file number.

Ex. : To select the file number 3, press 3.

To select the file number 14, press +10 then 4.

To select the file number 24, press +10, +10, then 4.

To select the file number 110, press +10 ten times, then 10.

The selected file number appears in the file number indication, then

the slide-show playback starts from the file you have specified.

7Selecting files or groups

To skip pictures (files) forward

Press ¢ or cursor ∞ as many times as required.

To skip pictures (files) backward

Press 4 or cursor 5 as many times as required.

7Stopping slide-show playback completely

Press 7.

The JPEG CONTROL screen appears on the TV.

•For how to operate through the JPEG CONTROL screen, see

“Operations through the JPEG CONTROL Screen” on page 48.

231

564

VFP

10/0 +10

100+ TV RETURN

TV/VIDEO REW/(TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

CHOICE

ENTER

ON SCREEN

DIGEST TOP MENU MENU

RETURN

EN45-48RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM47

JPEG Disc Playback

Notes:

•The following functions are not available to the slide-show playback:

program playback, random playback, repeat playback, fast-forward/

reverse playback, on-screen bar, and choice menus.

•If a black screen continuously appears in the slide-show playback:

the file currently played may be non-baseline JPEG file. In this

case, select a playable file (a baseline JPEG file) again (e.g.,

pressing

or MENU to open the JPEG CONTROL screen, etc.).

Note that it may take a long time to select another file.

•Some files on a JPEG disc may be distored during playback.

Operations through the JPEG CONTROL

Screen

You can search for and show the desired groups and files through the

JPEG CONTROL screen.

7JPEG CONTROL screen

Current group number/Total group number

Current

group

Current file

Current file number/

Total file number in the current group

(Total file number on the loaded disc)

JPEG CONTROL

Group : 02 / 03 FILE : 05 / 14 (Total 41)

Mountain

Sea

Sky

Anemone fish

Bonito

Butterfly fish

Dolphin

Garden eel

Manta ray

Seal

Swordfish

Tuna

Turtle

Whale

Whale shark

7To select a group

Press cursor 3 (or 2) repeatedly.

7To select a file

Press cursor ∞ (or 5) repeatedly.

7To show the selected file

Press ENTER.

•When the still picture has been shown on the TV thoroughly, you

can zoom in or out the still picture (see pages 39 and 40).

•If you press 3, the slide-show playback starts from the selected

file.

7Zooming in on the still picture

Press ZOOM.

To move the zoomed-in position

Press cursor 5/∞/3/2.

To return to normal playback

Press ENTER.

See also pages 39 and 40.

7To return to the JPEG CONTROL screen

Press MENU or 7.

Repeat Playback

You can repeat playback of the current group or all the files on the

loaded disc.

&During playback or while

stopped

From the remote control ONLY:

Press REPEAT.

The repeat indication appears on the JPEG CONTROL screen and

the REPEAT indicator lights up on the display.

•Each time you press the button, the repeat mode changes as

follows:

REPEAT GROUP “ REPEAT ALL “

the indication goes off “ (back to the beginning)

REPEAT GROUP : Repeats the current group

REPEAT ALL : Repeats all the files on the disc

To cancel repeat mode

Press REPEAT repeatedly until the repeat indication goes off from

the JPEG CONTROL screen (the REPEAT indicator also goes off

from the display).

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP FM MODE STROBE

EFFECT

– TV/DBS CH +

CONTROL

CENTER

Notes:

•You can check the group number and the file number on the display

window.

•Some group and file names may not be displayed correctly

because of the recording condition.

•The order of groups and files on a JPEG disc may be displayed

differently from the order displayed on your personal computer.

•Up to 12 groups and files are displayed on the TV at a time.

Pressing cursor

∞

repeatedly shows the hidden groups and

files one by one.

•Before using the remote control, press DVD to change the

remote control operation mode.

TV/VIDEO REW/(TUNING/GROUP 9/FF

REPEAT SLEEP FM MODE STROBE

– TV/DBS CH +

–

CHOICE

ENTER

ON SCREEN

ZOOM

PAGE

DIGEST TOP MENU MENU

RETURN

MUTING TV VOL VOLUME

EN45-48RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM48

Button

CHOICE

5/∞

3/2

ENTER

To do

Display the choice menu on the TV.

Each time you press the button, the

choice menu is turned on and off

alternately.

Select an item.

Adjust the selected item on the choice

menu.

Move to the submenu of the selected

item or decide the setting.

You can adjust the initial settings through the choice menu on the TV.

Before operating the choice menu, select the source you want to adjust by pressing source selecting button.

•When selecting FM or AM as the source, you cannot use the choice menu.

•When selecting the source other than DVD, FM, and AM, you can use the AUDIO and SPK. SETTING menus. The audio adjustments are

memorized for each source.

Notes:

•You need to turn on your TV and select the correct input mode on the TV.

•You can only use the remote control for the choice menu operations.

•You can change the language used in the choice menu. See page 51.

•You cannot show the choice menu when an MP3 disc or a JPEG disc is loaded.

Choice Menu Operations

Operation Buttons

To do the operations in this choice menu, use the buttons on the

remote control.

From the remote control ONLY

Configuration of Choice Menu

The choice menu has the following menus:

LANGUAGE menu

(see page 51)

You can select the initial

language for the disc menu,

audio, and subtitle. You can also

select the language used on the

TV screen while operating this

unit.

PICTURE menu (see page 51)

You can select the desired

options concerning a picture or

monitor screen.

AUDIO menu (see page 52)

You can adjust the sound

settings of this unit through this

menu.

SPK. SETTING menu

(see page 53)

You can adjust the speaker

settings. You can also adjust the

output level of the speakers.

OTHERS menu (see page 54)

You can change the settings for

some of the functions.

To set Parental Lock, use this

menu.

ENGLISH

OFF

LANGUAGE

MENU LANGUAGE

ON SCREEN LANGUAGE

AUDIO LANGUAGE

SUBTITLE

USE TO SELECT, USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

AUTO

USE TO SELECT, USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

MP3 / JPEG MP3

CENTER

AUDIO

L/R BALANCE

BASS

TREBLE

LFE ATT.

D. RANGE COMPRESSION

0 dB

MID

USE TO SELECT, USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

100Hz

SPK. SETTING

CROSS OVER

LEVEL

SIZE

DISTANCE

RETURN TO INITIAL

USE TO SELECT, USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

OTHERS

RESUME

ON SCREEN GUIDE

AUTO STANDBY

OFF

PARENTAL LOCK

USE TO SELECT, USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

ENTER

CHOICE

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM49

Operating Procedure

Ex. : When setting the progressive mode.

Before operating the choice menu, press DVD to change the

source to DVD.

Press CHOICE.

The LANGUAGE menu appears on the TV.

Press cursor 3 (or 2) repeatedly

to display PICTURE menu.

•Each time you press the button, the menu

changes.

Press cursor ∞ (or 5) repeatedly

to move to “PROGRESSIVE

MODE.”

Press ENTER.

The pop-up window appears, listing the

selectable options.

Press cursor ∞ (or 5) repeatedly

to select the desired option.

Press ENTER to finish the setting.

To set other items on the same choice menu

Repeat steps

To move to another choice menu

Press cursor 3 (or 2) repeatedly to select a choice menu you want

to set up.

To return to the normal screen

Press CHOICE.

Note:

•Some items in the choice menu consist of submenus for setting up

various options. Pressing ENTER makes the submenus for the

selected item appear on the TV.

You can set the items using cursor

∞

and ENTER (as explained

in steps

and

above).

ENTER

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

AUTO

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

MP3 / JPEG MP3

AUTO

FILM

VIDEO

Ex. : When “FILM” is selected.

ENTER

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

FILM

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

MP3 / JPEG MP3

Choice Menu Operations

ENGLISH

OFF

LANGUAGE

MENU LANGUAGE

ON SCREEN LANGUAGE

AUDIO LANGUAGE

SUBTITLE

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

CHOICE

ENTER

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

AUTO

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

MP3 / JPEG MP3

ENTER

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

AUTO

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

MP3 / JPEG MP3

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

AUTO

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

MP3 / JPEG MP3

AUTO

FILM

VIDEO

ENTER

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM50

Choice Menu Operations

7LANGUAGE menu

You can select “MENU LANGUAGE,” “AUDIO LANGUAGE,”

and “SUBTITLE” only before playback.

¶MENU LANGUAGE

Some discs have multiple languages.

Select one of the languages or language codes from AA to ZU

(see “Language code list” on page 52) as the menu language.

¶AUDIO LANGUAGE

Some discs have multiple audio languages.

Select one of the languages or language codes from AA to ZU

(see “Language code list” on page 52).

¶SUBTITLE

Some discs have multiple subtitle languages.

Select one of the languages or language codes from AA to ZU

(see “Language code list” on page 52) or “OFF (no subtitle).”

Note:

•When the language you have selected for MENU LANGUAGE,

AUDIO LANGUAGE, or SUBTITLE is not recorded on a disc,

the original language is used as the initial language

automatically.

¶ON SCREEN LANGUAGE

Select one of the languages shown on the TV.

7PICTURE menu

¶MONITOR TYPE

You can select the monitor type to match your TV when you

play DVD VIDEO recorded in the picture’s width/height ratio of

16:9.

ENGLISH

OFF

LANGUAGE

MENU LANGUAGE

ON SCREEN LANGUAGE

AUDIO LANGUAGE

SUBTITLE

Select one of the following settings:

16:9 NORMAL (Wide television conversion) :

Select this when the aspect ratio of your TV is fixed

to 16:9 (wide TV). The unit automatically adjusts the

screen width of the output signal correctly when

playing back a picture whose aspect ratio is 4:3.

16:9 AUTO (Wide television conversion) :

Select this when the aspect ratio of your TV is 16:9

(wide TV).

4:3 LB (Letter Box conversion) :

Select this when the aspect ratio of your TV is 4:3

(conventional TV). While viewing a wide screen

picture, the black bars appear on the top and the

bottom of the screen.

4:3 PS (Pan Scan conversion) :

Select this when the aspect ratio of your TV is 4:3

(conventional TV). While viewing a wide screen

picture, the black bars do not appear; however, the

left and right edges of the pictures will not be shown

on the screen.

•Even if “4:3 PS” is selected, the screen size may become

“4:3 LB” with some DVD VIDEO. This depends on how they

are recorded.

•When you select “16:9 NORMAL” for a picture whose aspect

ratio is 4:3, the picture slightly changes due to the process for

converting the picture width.

¶PROGRESSIVE MODE

You can select the progressive mode according to the picture

type (film or video source). This takes effect only when

“PROGRESSIVE” is selected as the scanning mode (see page

14).

Normally, set to “AUTO.”

Select one of the following settings:

VIDEO : Suitable for playing back a video source disc.

FILM : Suitable for playing back a film or progressive

source disc.

AUTO : Used to play a disc containing both video and film

source materials. This unit recognizes the picture

type (film or video source) of the current disc

according to the disc information.

•If the playback picture is unclear or noisy, or the

oblique lines of the picture are rough, try to change

to other modes.

¶SCREEN SAVER

You can activate or deactivate the screen saver function.

Select one of the following settings:

ON : The picture on the TV becomes dark when no

operation is done for 5 minutes.

OFF : The screen saver function does not work.

Ex. : 4:3 PS

Ex. : 16:9 Ex. : 4:3 LB

4:3 LB

PICTURE

MONITOR TYPE

PROGRESSIVE MODE

SCREEN SAVER

AUTO

MP3 / JPEG MP3

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM51

¶MP3/JPEG

If both MP3 files and JPEG files are recorded on a disc, you can

select which files to play.

Select one of the following settings:

MP3 : Select this for playing MP3 files.

JPEG : Select this for playing JPEG files.

7AUDIO menu

You can also adjust the following items using the front panel or

remote control (see pages 19 to 24).

¶L/R BALANCE

Adjust the output balance between the left front speaker and

right front speaker within the range of “R–21” to “CENTER”

or “CENTER” to “L–21.”

¶BASS

Adjust the bass tone level from the front speakers within the

range of –10 to +10 in 2 step intervals.

¶TREBLE

Adjust the treble tone level from the front speakers within

the range of –10 to +10 in 2 step intervals.

¶LFE ATT.

The Low Frequency Effect attenuater diminishes the distortion

of the bass sound from the subwoofer while playing back a disc

with Dolby Digital or DTS Digital Surround.

Select one of the following settings:

–10 dB : Select this to diminish the distortion of the bass

sound from the subwoofer.

0 dB : Select this to cancel this function.

¶D. RANGE COMPRESSION

You can enjoy a powerful sound at night even at a low volume

level when listening to the sound with Dolby Digital.

Select one of the following settings:

MAX : Select this when you want to apply the compression

effect fully (useful at midnight).

MID : Select this when you want to reduce the dynamic

range a little.

OFF : Select this when you want to enjoy surround with its

full dynamic range (no effect applied).

CENTER

AUDIO

L/R BALANCE

BASS

TREBLE

LFE ATT.

D. RANGE COMPRESSION

0 dB

MID

KM Cambodian

KN Kannada

KO Korean (KOR)

KS Kashmiri

KU Kurdish

KY Kirghiz

LA Latin

LN Lingala

LO Laothian

LT Lithuanian

LV Latvian, Lettish

MG Malagasy

MI Maori

MK Macedonian

ML Malayalam

MN Mongolian

MO Moldavian

MR Marathi

MS Malay (MAY)

MT Maltese

MY Burmese

NA Nauru

NE Nepali

NL Dutch

NO Norwegian

OC Occitan

FA Persian

FI Finnish

FJ Fiji

FO Faroese

FY Frisian

GA Irish

GD Scots Gaelic

GL Galician

GN Guarani

GU Gujarati

HA Hausa

HI Hindi

HR Croatian

HU Hungarian

HY Armenian

IA Interlingua

IE Interlingue

IK Inupiak

IN Indonesian

IS Icelandic

IW Hebrew

JI Yiddish

JW Javanese

KA Georgian

KK Kazakh

KL Greenlandic

AA Afar

AB Abkhazian

AF Afrikaans

AM Ameharic

AR Arabic

AS Assamese

AY Aymara

AZ Azerbaijani

BA Bashkir

BE Byelorussian

BG Bulgarian

BH Bihari

BI Bislama

BN Bengali, Bangla

BO Tibetan

BR Breton

CA Catalan

CO Corsican

CS Czech

CY Welsh

DA Danish

DZ Bhutani

EL Greek

EO Esperanto

ET Estonian

EU Basque

OM (Afan) Oromo

OR Oriya

PA Panjabi

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

RM Rhaeto-Romance

RN Kirundi

RO Rumanian

RU Russian

RW Kinyarwanda

SA Sanskrit

SD Sindhi

SG Sangho

SH Serbo-Croatian

SI Singhalese

SK Slovak

SL Slovenian

SM Samoan

SN Shona

SO Somali

SQ Albanian

SR Serbian

SS Siswati

ST Sesotho

SU Sundanese

SV Swedish

SW Swahili

TA Tamil

TE Telugu

TG Tajik

TH Thai

TI Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TS Tsonga

TT Tatar

TW Twi

UK Ukrainian

UR Urdu

UZ Uzbek

VI Vietnamese

VO Volapuk

WO Wolof

XH Xhosa

YO Yoruba

ZU Zulu

Language code list

Choice Menu Operations

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM52

Choice Menu Operations

7SPK. SETTING menu

¶SIZE

Select this to enter the SIZE submenu.

FRONT SPEAKER, CENTER SPEAKER, and

REAR SPEAKER

Select one of the following settings for each speaker:

LARGE (LRG) : Select this when the speaker size is relatively

large.

SMALL (SML) : Select this when the speaker size is relatively

small.

NONE (NO) : Select this when you have not connected a

speaker. (Not selectable for the front

speakers)

SUBWOOFER

Select one of the following settings:

USE (YES) : Select this when a subwoofer is connected.

NONE (NO) : Select this when no subwoofer is used.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•Keep the following comment in mind as reference when

adjusting speaker settings.

–If the size of the cone speaker unit built in your speaker is

greater than 4

inches (12 cm), select “LARGE,” and if it is

smaller than 4

inches (12 cm), select “SMALL.”

•If you have selected “SMALL” for the front speakers, you cannot

select “LARGE” for the center and rear speakers.

•If you have selected “NONE” for subwoofer, you cannot select

“SMALL” for the front speakers.

•You can take advantage of the speaker diagrams on the left

part of the SPK. SETTING menu to set the speaker.

–The speaker diagram for the selected speaker is highlighted.

–The size of the speaker diagram is changed according to

your setting.

100Hz

SPK. SETTING

CROSS OVER

LEVEL

SIZE

DISTANCE

RETURN TO INITIAL

¶LEVEL

Select this to enter the LEVEL submenu.

CENTER SPEAKER, LEFT REAR SPEAKER, RIGHT

REAR SPEAKER, and SUB WOOFER

Adjust the speaker output level within the range of –10 dB to

+10 dB for each speaker in 1 step interval.

TEST TONE

Select this to start or stop test tone.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•When “NONE” is selected for the center speaker, rear speakers

and/or subwoofer on the SIZE menu, “–” appears instead of the

current setting. In this case, you cannot adjust the output level

of those speakers.

•You can adjust the output level for center speaker and/or rear

speakers only when one of proper Surround modes are

activated (see page 27).

•When “NONE” is selected for the center and/or rear speakers,

the test tone does not come out of those speakers.

¶DISTANCE

Select this to enter the DISTANCE submenu.

FRONT SPEAKER, CENTER SPEAKER, and

REAR SPEAKER

For each speaker, set the distance from the listening point

within the range of 1 ft (0.3 m) to 30 ft (9.0 m), in 1 ft (0.3 m)

interval.

TEST TONE

Select this to start or stop test tone.

RETURN

Select this to return to SPK. SETTING menu.

Notes:

•When “NONE” is selected for the center speaker and rear

speakers on the SIZE menu, “–” appears instead of the current

setting. In this case, you cannot adjust the speaker distance of

those speakers.

•When “NONE” is selected for the center speaker and/or rear

speakers on the SIZE menu, the test tone does not come out of

those speakers.

0 dB

LEVEL

RETURN

CENTER SPEAKER

LEFT REAR SPEAKER

TEST TONE

RIGHT REAR SPEAKER

0 dB

–

SUB WOOFER

3.0m/10 ft

DISTANCE

FRONT SPEAKER

RETURN

CENTER SPEAKER

REAR SPEAKER

TEST TONE

3.0m/10 ft

LARGE

SIZE

FRONT SPEAKER

RETURN

CENTER SPEAKER

REAR SPEAKER

SMALL

SUB WOOFER NONE

Speaker diagrams

Subwoofer

Front speakers

Rear speakers

Center speaker

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM53

Setting DVD preferences

¶CROSS OVER

When you use a small speaker in any position, this unit

automatically reallocates the bass sound elements assigned to

the small speaker to the large speakers.

To use this function properly, set this crossover frequency level

according to the size of the smallest speaker connected.

•If you have selected “LRG (large)” or “LARGE” for all

speakers, this function will not take effect.

Select one of the following settings:

120Hz : Select this frequency when the cone speaker unit

built in the speaker is about 3 3/16 inches (8 cm).

100Hz : Select this frequency when the cone speaker unit

built in the speaker is about 3 15/16 inches (10 cm).

80Hz : Select this frequency when the cone speaker unit

built in the speaker is about 4 3/4 inches (12 cm).

¶RETURN TO INITIAL

Select this to reset all speaker settings to the initial settings.

7OTHERS menu

¶RESUME

You can activate or deactivate the resume play function of the

built-in DVD player.

Select one of the following settings:

ON : Select this to activate this function.

OFF : Select this to deactivate it.

¶ON SCREEN GUIDE

You can activate or deactivate the following on-screen guide

icons:

For multi-view angles :

For plural subtitles :

For plural audio languages :

For playback status : , ,

1/8

x 5

etc.

The on-screen guide icons appear on the TV at the beginning of

the playback with this function turned on.

When recording the picture with VCR, select “OFF” to avoid

recording the indications above on your video tape.

•The choice menu and on-screen bar can be recorded even

though this function is set to “OFF.”

Select one of the following settings:

ON : Select this to activate this function.

OFF : Select this to deactivate it.

•Subtitles (see page 35) and the information for zooming in

(see pages 39 and 40) appear on the display even though this

setting is “OFF.”

¶AUTO STANDBY

When the playback of the disc on the built-in DVD player ends

and no operation is done for more than the selected time, the

unit is turned off automatically.

•This function takes effect only when DVD is selected as the

source.

Select one of the following settings:

60 : Select this to turn off the unit if no operation is done

within 60 minutes.

30 : Select this to turn off the unit if no operation is done

within 30 minutes.

OFF : Select this to deactivate it.

•If Sleep Timer (see page 12) and Auto Standby are used at a

time, one with the early shut-off time will turn off the unit.

¶PARENTAL LOCK

You can restrict playback of DVD VIDEO containing violent

scenes and those not suitable for your family members.

•You can select “PARENTAL LOCK” only before playback.

Select this to enter the PARENTAL LOCK submenu.

(See pages 55 and 56.)

Choice Menu Operations

OTHERS

RESUME

ON SCREEN GUIDE

AUTO STANDBY

OFF

PARENTAL LOCK

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM54

Choice Menu Operations

Restricting Playback by Parental Lock

You can restrict playback of DVD VIDEO containing violent scenes

and those not suitable for your family members. Nobody can play

such a disc unless this function is canceled.

•This setting takes effect only for the DVD VIDEO containing the

Parental Lock level information—Level 1 (most restrictive) to

Level 8 (least restrictive).

•You can set the Parental Lock only while playback is stopped.

7Setting Parental Lock

Press CHOICE, then press cursor 3 (or 2) to

display the OTHERS menu.

Press cursor ∞ (or 5) repeatedly to move to

“PARENTAL LOCK,” then press ENTER.

The PARENTAL LOCK submenu appears on the TV.

Press cursor ∞ (or 5) repeatedly to move to

“COUNTRY CODE,” then press ENTER.

The submenu for setting the country code appears.

Press cursor ∞ (or 5) repeatedly to select the

country code, then press ENTER.

See “Country/Area codes list for Parental Lock” on page 57.

moves to “SET LEVEL.”

Press ENTER.

The pop-up window for setting level appears.

Press cursor ∞ (or 5) repeatedly to select the

level of restriction, then press ENTER.

moves to “PASSWORD.”

•The smaller the value of level is, the more restrictive the

Parental Lock level is.

•Select “NONE” to cancel this function.

Press the number buttons (0–9) to enter a four

digit number as your password, then press

ENTER.

moves to “EXIT.”

Press ENTER.

OTHERS menu resumes.

To return to the normal screen

Press CHOICE.

Note:

•Remember your password or make a note of it.

You need to enter your password to change the setting or release

the lock. To change the setting, see page 56.

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

PARENTAL LOCK

COUNTRY CODE

SET LEVEL

PASSWORD

NONE

_ _ _ _

EXIT

NONE

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

PARENTAL LOCK

COUNTRY CODE

SET LEVEL

PASSWORD

NONE

_ _ _ _

EXIT

USE TO SELECT. USE ENTER TO CONFIRM.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

PARENTAL LOCK

COUNTRY CODE

SET LEVEL

PASSWORD

NONE

_ _ _ _

EXIT

NEW PASSWORD? PRESS 0 9KEY.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

PARENTAL LOCK

COUNTRY CODE

SET LEVEL

PASSWORD

_ _ _ _

EXIT

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM55

7Changing the setting of Parental Lock

Press CHOICE, then press cursor 3 (or 2) to

display the OTHERS menu.

Press cursor ∞ (or 5) repeatedly to move to

“PARENTAL LOCK,” then press ENTER.

The PARENTAL LOCK submenu appears on the TV.

•You can only move to “PASSWORD” or to “EXIT” before

you enter your password.

Press the number buttons (0–9) to enter your

password, then press ENTER.

•If you enter a wrong password, “WRONG! RETRY••• PRESS

0~9KEY” appears on the PARENTAL LOCK submenu.

You cannot go to next steps before you enter the correct

password.

Press cursor ∞ (or 5) repeatedly to move to

the item you want to change, then press ENTER.

Press cursor ∞ (or 5) repeatedly to change the

setting, then press ENTER.

Press the number buttons (0–9) to enter your

password, then press ENTER.

The new setting is stored.

Notes:

•You cannot set the Parental Lock before you set your password.

•If you go out of the PARENTAL LOCK submenu before setting your

password in step

, the new country code and parental level will not

become effective, and the old country code and parental level

remain effective.

•When you enter wrong passwords more than three times,

moves to “EXIT” automatically and cursor

∞

(or

) does not work.

Press ENTER to exit from the PARENTAL LOCK submenu, then

start from step

again.

•If you forget your password, enter “8888.”

7Releasing Parental Lock temporarily

When you set a strict parental level, some discs may not be played

back at all. When you load such a disc and try to play it, the

following display appears on the TV. You can release Parental Lock

temporarily.

Press cursor ∞ (or 5) repeatedly to move to

“TEMPORARY RELEASE”, then press ENTER.

moves to “PASSWORD.”

•If you do not want to release Parental Lock temporarily, select

“NOT RELEASE” by pressing cursor ∞ (or 5), then press

ENTER. To eject the disc, press 0.

Press number buttons (0–9) to enter your

password, then press ENTER.

Playback starts.

•If you enter a wrong password, “WRONG! RETRY••• PRESS

0~9KEY” appears on the PARENTAL LOCK submenu.

You cannot play the disc before you enter the correct

password.

Note:

•When you enter wrong passwords more than three times,

moves to “NOT RELEASE” automatically and cursor

∞

(or

) does

not work. Press

to remove the disc.

PASSWORD? PRESS 0 9KEY.

TO EXIT, PRESS CHOICE.

ENTER

SELECT

PARENTAL LOCK

COUNTRY CODE

LEVEL

PASSWORD

_ _ _ _

EXIT

PARENTAL LOCK

PASSWORD _ _ _ _

TEMPORARY RELEASE

PASSWORD? ••• PRESS 0 ~ 9 KEY

ENTER

SELECT

NOT RELEASE

Choice Menu Operations

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM56

Setting DVD preferences

Choice Menu Operations

Country/Area codes list for Parental Lock

AD Andorra

AE United Arab Emirates

AF Afghanistan

AG Antigua and Barbuda

AI Anguilla

AL Albania

AM Armenia

AN Netherlands Antilles

AO Angola

AQ Antarctica

AR Argentina

AS American Samoa

AT Austria

AU Australia

AW Aruba

AZ Azerbaijan

BA Bosnia and Herzegovina

BB Barbados

BD Bangladesh

BE Belgium

BF Burkina Faso

BG Bulgaria

BH Bahrain

BI Burundi

BJ Benin

BM Bermuda

BN Brunei Darussalam

BO Bolivia

BR Brazil

BS Bahamas

BT Bhutan

BV Bouvet Island

BW Botswana

BY Belarus

BZ Belize

CA Canada

CC Cocos (Keeling) Islands

CF Central African Republic

CG Congo

CH Switzerland

CI Côte d’Ivoire

CK Cook Islands

CL Chile

CM Cameroon

CN China

CO Colombia

CR Costa Rica

CU Cuba

CV Cape Verde

CX Christmas Island

CY Cyprus

CZ Czech Republic

DE Germany

DJ Djibouti

DK Denmark

DM Dominica

DO Dominican Republic

DZ Algeria

EC Ecuador

EE Estonia

EG Egypt

EH Western Sahara

ER Eritrea

ES Spain

ET Ethiopia

FI Finland

FJ Fiji

FK Falkland Islands (Malvinas)

FM Micronesia

(Fedelated States of)

FO Faroe Islands

FR France

FX France, Metropolitan

GA Gabon

GB United Kingdom

GD Grenada

GE Georgia

GF French Guiana

GH Ghana

GI Gibraltar

GL Greenland

GM Gambia

GN Guinea

GP Guadeloupe

GQ Equatorial Guinea

GR Greece

GS South Georgia and the

South Sandwich Islands

GT Guatemala

GU Guam

GW Guinea-Bissau

GY Guyana

HK Hong Kong

HM Heard Island and

McDonald Islands

HN Honduras

HR Croatia

HT Haiti

HU Hungary

ID Indonesia

IE Ireland

IL Israel

IN India

IO British Indian Ocean

Territory

IQ Iraq

Iran (Islamic Republic of)

IS Iceland

IT Italy

JM Jamaica

JO Jordan

JP Japan

KE Kenya

KG Kyrgyzstan

KH Cambodia

KI Kiribati

KM Comoros

KN Saint Kitts and Nevis

KP Korea, Democratic

People’s Republic of

KR Korea, Republic of

KW Kuwait

KY Cayman Islands

KZ Kazakhstan

LA Lao People’s

Democratic Republic

LB Lebanon

LC Saint Lucia

LI Liechtenstein

LK Sri Lanka

LR Liberia

LS Lesotho

LT Lithuania

LU Luxembourg

LV Latvia

LY Libyan Arab Jamahiriya

MA Morocco

MC Monaco

MD Moldova, Republic of

MG Madagascar

MH Marshall Islands

ML Mali

MM Myanmar

MN Mongolia

MO Macau

Northern Mariana Islands

MQ Martinique

MR Mauritania

MS Montserrat

MT Malta

MU Mauritius

MV Maldives

MW Malawi

MX Mexico

MY Malaysia

MZ Mozambique

NA Namibia

NC New Caledonia

NE Niger

NF Norfolk Island

NG Nigeria

NI Nicaragua

NL Netherlands

NO Norway

NP Nepal

NR Nauru

NU Niue

NZ New Zealand

OM Oman

PA Panama

PE Peru

PF French Polynesia

PG Papua New Guinea

PH Philippines

PK Pakistan

PL Poland

Saint Pierre and Miquelon

PN Pitcairn

PR Puerto Rico

PT Portugal

PW Palau

PY Paraguay

QA Qatar

RE Réunion

RO Romania

RU Russian Federation

RW Rwanda

SA Saudi Arabia

SB Solomon Islands

SC Seychelles

SD Sudan

SE Sweden

SG Singapore

SH Saint Helena

SI Slovenia

Svalbard and Jan Mayen

SK Slovakia

SL Sierra Leone

SM San Marino

SN Senegal

SO Somalia

SR Suriname

ST Sao Tome and Principe

SV El Salvador

SY Syrian Arab Republic

SZ Swaziland

Turks and Caicos Islands

TD Chad

French Southern Territories

TG Togo

Thailand Code Language

TJ Tajikistan

TK Tokelau

TM Turkmenistan

TN Tunisia

TO Tonga

TP East Timor

TR Turkey

TT Trinidad and Tobago

TV Tuvalu

Taiwan

TZ Tanzania, United

Republic of

UA Ukraine

UG Uganda

UM United States Minor

Outlying Islands

US United States

UY Uruguay

UZ Uzbekistan

VA Vatican City State

(Holy See)

VC Saint Vincent and the

Grenadines

VE Venezuela

VG Virgin Islands (British)

VI Virgin Islands (U.S.)

VN Viet Nam

VU Vanuatu

Wallis and Futuna Islands

WS Samoa

YE Yemen

YT Mayotte

YU Yugoslavia

ZA South Africa

ZM Zambia

ZR Zaire

ZW Zimbabwe

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM57

Glossary for DVD Player

Aspect ratio

The ratio of vertical and horizontal sizes of a displayed image. The

horizontal vs. vertical ratio of conventional TVs is 4:3 and that of

wide-screen TVs is 16:9.

Chapter

The smallest division on DVD VIDEO. It is a division of a title and

similar to a track for CD or VCD.

Composite video signal

A video signal comprised of three kinds of signals combined: an

image signal made up of luminance and chrominance signals using

the frequency multiplication technique, burst signal providing the

basis for color reproduction, and synchronization signal.

Component video signal

A video signal system where parts of information necessary for

reproducing image signal comprised of the three primary colors of

light are transmitted via separate signal lines. Types of signal, such

as R/G/B, Y/PB/PR, etc., are available.

Disc menu

A screen display prepared for allowing selection of images, sounds,

subtitles, multi-angle, etc. recorded on DVD VIDEO.

Interlaced scanning

In the conventional video system, a picture is shown on the display

monitor in two halves. The Interlaced scanning system places lines

of the second half of the picture in-between lines of the first half of

the picture.

JPEG

A still-picture data compression system proposed by the Joint

Photographic Expert Group, which features little distortion in image

quality in spite of its high compression ratio.

Linear PCM (PCM: Pulse Code Modulation)

A system for converting analog sound signal to digital signal for

later processing with no data compression used in conversion.

Letter box

A method of displaying wide images like movies in on a 4:3 TV

screen with no part of the image deleted by placing black bands on

the top and bottom of the screen. This name has derived from the

screen form looking literally like a letter box.

MP3

A file format with a sound data compression system. “MP3” is the

abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio

Layer 3. By using MP3 format, one CD-R or CD-RW can contain

about 10 times as much data volume as a regular CD can.

Multi-angle

By recording multiple scenes progressing at the same time in a

single title, the user can select view angles. This feature is called the

multi-angle function.

Multichannel

DVD VIDEO has been designed to have each soundtrack constitute

one sound field. Multichannel refers to a structure of sound tracks

having three or more channels.

Multilanguage

When a title is created to cope with multiple languages, it is

generally called a multilanguage title.

Parental Lock

A feature of this system to automatically determine whether or not

to reproduce particular DVD VIDEO software by comparing its

parental level (a measure of undesirability of scenes, etc. from

educational viewpoint) set for the software beforehand with that set

on this system by the user; if the software’s level is less restrictive

than the user-set level, it will be reproduced.

Playback control (PBC)

Refers to the signal recorded on VCD/SVCD for controlling

reproduction. By using menu screens recorded on VCD/SVCD that

supports PBC, you can enjoy interactive-type software as well as

software having a search function.

Progressive scanning

By progressive scanning, all the horizontal lines of a picture are

displayed at one time as a single frame. This system can convert the

interlaced video from DVD VIDEO into progressive format for

connection to a progressive TV. It dramatically increases the vertical

resolution.

Region code

A system for allowing discs to be played back only in the regions

designated beforehand. All the countries in the world are divided

into six regions and each region is identified by a specified region

code (or region number). If the region code of a disc matches that of

a player, the player can play back the disc.

Surround

A system for creating three-dimensional sound fields full of realism

by arranging multiple speakers around the listener.

Sampling frequency

Frequency of sampling data when analog data is converted to digital

data. Sampling frequency numerically represents how many times

the original analog signal is sampled per second.

Transfer rate

The rate of transferring digital data. Usually the measure is in bit per

second (bps). The DVD system applies a variable transfer rate

system for high efficiency.

EN49-58RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM58

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV and VCR) through the unit.

This unit is equipped with the AV COMPU LINK-III, which has added a function to operate JVC’s video components through the video

components terminals. To use this remote control system, you need to connect the video components you want to operate, following the

diagrams below and the procedures on page 60.

•Refer also to the manuals supplied with your video components.

CAUTION:

When connecting the TV with the

AV COMPU LINK remote control

system, connect the unit to the

AV COMPU LINK III or

AV COMPU LINK EX terminal.

DO NOT connect the unit to the

AV COMPU LINK RECEIVER/

AMP terminal.

CONNECTIONS 1: AV COMPU LINK Connection

CASE 1 When connecting the source equipment to the unit through the S-video terminals, connect this unit to the

TV’s Video Input 1 terminal using S-video cables.

CASE 2 When connecting the source equipment to the unit through the composite video terminals, connect this

unit to the TV’s Video Input 2 terminal (composite video input) using composite video cables.

CASE 3 When setting the video output mode of the built-in DVD player to “component,” connect this unit to the

TV’s Video Input 2 terminals (component video input) using component video cables.

To Video Input 1

RX-DV5SL

S-video cable

Source

Equipment

To Video Input 2

Composite

video cable

Composite

video cable

RX-DV5SL

Source

Equipment

To Video Input 2

Component

video cable

RX-DV5SL

Notes:

•When connecting the unit and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic

Selection of TV’s Input Mode (see page 60).

•When connecting the VCR only to this unit, connect it directly to the unit using cables with the monaural mini-plugs.

CONNECTIONS 2: Video Cable Connection

This unit is equipped with three types of the video terminals—composite video, S-video, and component video, and the signals coming into

this unit through one type of video terminals can output only through the terminal of the same type. So you need to connect the VCR and TV

to this unit using one of the following two ways—CASE 1 or 2:

•When using the AV COMPU LINK remote control system, set the component video input correctly (see “Video output mode” on

page 22); otherwise, the correct input for this unit will not be selected on the TV.

AV COMPU LINK Remote Control System

COMPU LINK III

COMPU LINK

AV COMPU LINK-

VCR TV

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM59

1. If you have already plugged your VCR, TV, and

this unit into the AC outlets, unplug their AC

power cords first.

2. Connect your VCR, TV, and this unit following

“CONNECTIONS 1” on the previous page, using

the cables with the monaural mini-plugs (not

supplied).

3. Connect the audio input/output jacks on VCR,

TV, and this unit using the audio cords.

•See pages 7 to 9.

4. Connect the video input/output jacks on VCR,

TV and this unit following “CONNECTIONS 2”

on the previous page, using the composite video

cord, with S-video plug or with component video

plugs.

5. Plug the AC power cords of the components into

the AC outlets.

6. When turning on the TV for the first time after

the AV COMPU LINK connection, turn the TV

volume to the minimum using the TV volume

control on the TV.

7. Turn on other connected components first, then

turn on this unit.

•When turning on the VCR, use the remote control supplied

with this unit—press STANDBY/ON VCR.

The AV COMPU LINK remote control system allows you to use the

five basic functions listed below.

Remote Control of the TV and VCR Using This

Remote Control

For details, see page 62.

•Aim the remote control directly at the remote sensor on each

target component.

One-Touch Video Play

Simply by inserting a video cassette without its safety tab into the

VCR, you can enjoy the video playback without setting other

switches manually. The unit automatically turns on and changes the

source to VCR.

The TV automatically turns on and changes the input mode to the

appropriate position so that you can view the playback picture.

When you insert a video cassette with its safety tab, press the play

(3) button on the VCR or on the remote control. You can get the

same result.

One-Touch DVD Play

Simply by starting playback on the built-in DVD player, you can

enjoy the playback without setting other switches manually.

The TV automatically turns on and changes the input mode to the

appropriate position so that you can view the playback picture.

Automatic Selection of TV’s Input Mode

•When you select TV as the source to play on the unit, the TV

automatically changes the input mode to the TV tuner so that you

can watch TV.

•When you select DVD, VCR, or DBS as the source to play on the

unit, the TV automatically changes the input mode to the

appropriate position so that you can view the playback picture.

Notes:

•When connecting a TV with the AV COMPU LINK EX terminal to

this unit, you cannot use a component video cable (as CASE 3 on

the previous page).

•When you select TV as the source on the unit, you cannot see the

menu on the TV screen since the AV COMPU LINK remote control

system automatically changes the TV’s input mode to the TV tuner.

If you do not mind stopping listening to the TV sounds, you can

then show the on-screen menu after changing the TV’s input mode

to the appropriate position the unit is connected to.

Automatic Power On/Off

The TV and VCR turn on and off along with the unit.

When you turn on the unit;

•If the previously selected source is VCR, the TV and VCR will

turn on automatically.

•If the previously selected source is TV or DVD, only the TV will

turn on automatically.

When you turn off the unit, the TV and VCR will turn off.

Note:

•If you turn off the unit while recording on the VCR, the VCR will not

turn off, but continue recording.

AV COMPU LINK Remote Control System

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM60

7CD recorder

After pressing CDR, you can perform the following operations on a CD

player and a CD recorder:

3:Starts playing.

4:Returns to the beginning of the current (or previous)

track.

¢:Skips to the beginning of the next track.

7:Stops playing.

8:Pauses playing. To release it, press 3.

1 – 10, +10 : Selects a track number directly.

For track number 5, press 5.

For track number 15, press +10, then 5.

For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Note:

•When you start recording on the CD recorder, use the buttons on

the CD recorder itself or on the remote control supplied with it.

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this unit’s remote control, since control signals for JVC’s components are preset in the

remote control.

Operating Audio Components

To operate JVC’s audio components using this remote control

•Aim the remote control directly at the remote sensor on the unit.

•To operate a source with the remote control, the source must be

selected using the source selecting buttons on the remote control.

•Refer also to the manuals supplied with your components.

7Sound control section (Amplifier)

After pressing CONTROL repeatedly to show “SOUND” on the

operation mode display, you can perform the following operations:

SURR ON/OFF : Turns on or off the Surround modes—

Dolby Digital, DTS Digital Surround, and

Dolby Pro Logic II.

SURR MODE : Selects the Surround modes.

TEST : Turns on or off the test tone output.

CENTER + or –:Adjusts the center speaker channel output

level.

REAR•L + or –:Adjusts the left rear speaker channel

output level.

REAR•R + or –:Adjusts the right rear speaker channel

output level.

SUBWOOFER + or –:Adjusts subwoofer channel output level.

EFFECT : Selects the effect level.

Note:

•After adjusting sounds, press the source selecting button to operate

your target source by using number buttons; otherwise, number

buttons cannot be used for operating your target source.

7Tuner

You can always perform the following operations:

FM/AM : Tunes into the last selected FM or AM station.

•Each time you press the button, the band changes between FM and

AM alternately.

After pressing FM/AM, you can perform the following operations on

a tuner:

1 – 10, +10 : Selects a preset channel number directly.

For channel number 5, press 5.

For channel number 15, press +10, then 5.

For channel number 20, press +10, then 10.

TUNING 9 or (:Tunes into stations.

FM MODE : Changes the FM reception mode.

231

564

VFP

10/0 +10

100+ TV RETURN

EFFECT

TV/DBS CH +

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

231

564

VFP

10/0 +10

100 TV RETURN

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP

TAPETV CDR FM/AM

FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

231

564

VFP

10/0 +10

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP

TAPETV CDR FM/AM

FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

CENTER

REAR·L

REAR·R

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:53 AM61

Operating Video Components

To operate JVC’s video components using this remote control

•You need to connect JVC’s video components through the

AV COMPU LINK-III jacks (see page 59) in addition to the

audio/video connections (see pages 7 to 10).

•Some JVC’s VCRs can accept two types of the control signals—

remote codes “A” and “B.” Before using this remote control, make

sure that the remote control code of the connected VCR is set to

code “A.”

•To operate the video component(s) using the remote control, aim

the remote control directly at the remote sensor on each

component, not on this unit.

7TV

You can always perform the following operations:

STANDBY/ON TV : Turns on or off the TV.

TV VOL + or –:Adjusts the volume.

TV/VIDEO : Sets the input mode (either TV or

VIDEO).

After pressing TV, you can perform the following operations on a TV:

TV/DBS CH + or –:Changes the channels.

1 – 9, 0, 100+ : Selects the channels.

For channel number 5, press 5.

For channel number 10, press 1, then 0.

For channel number 23, press 2, then 3.

For channel number 135, press 100+, 3,

then 5.

TV RETURN : Alternates between the previously

selected channel and the current

channel.

7VCR

You can always perform the following operations:

STANDBY/ON VCR : Turns on or off the VCR.

After pressing VCR, you can perform the following operations on a

VCR:

1 – 9, 0 : Selects the TV channels on a VCR.

For channel number 5, press 5.

For channel number 10, press 1, then 0.

For channel number 23, press 2, then 3.

3:Starts playing.

REW : Rewinds a tape.

FF : Fast-winds a tape.

7:Stops operations.

8:Pauses playing. To release it, press 3.

–

231

564

VFP

10/0+10

100+ TV RETURN

VCRDBS DVD

TV/VIDEO REW/(TUNING/GROUP 9/FF

REPEAT SLEEP

VCRDBS TV AUDIO

TAPETV CDR FM/AM

FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL TEST

AUDIO

INPUT

SUBTITLE

ANGLE

ZOOM

PAGE

SURR ON/OFF

SURR MODE

DIMMER

MUTING TV VOL VOLUME

–

SUBWOOFER

CONTROL

PROGRESSIVE

STANDBY/ON

CENTER

REAR·L

REAR·R

Operating JVC’s Audio/Video Components

231

564

VFP

10/0+10

100+ TV RETURN

VCRDBS DVD

TV/VIDEO REW/

(

TUNING/GROUP

/FF

REPEAT SLEEP

VCRDBS TV AUDIO

TAPETV CDR FM/AM

FM MODE STROBE

EFFECT

– TV/DBS CH +

ANALOG

/DIGITAL

TEST

AUDIO

INPUT

SUBTITLE

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CONTROL

STANDBY/ON

CENTER

REAR·L

REAR·R

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM62

Operating Other Manufacturers’ Equipment

This remote control supplied with the unit can transmit control signals for other manufacturers’ TVs, DBS tuners, and VCRs.

By changing the transmittable signals from preset ones to other manufacturers’, you can operate other manufacturers’ components using this

remote control.

Changing the Preset Signal Codes

To operate other manufacturers’ equipment using this remote

control

•Aim the remote control directly at the remote sensor on each

equipment.

•To operate a source with the remote control, the source must be

selected using source selecting buttons on the remote control.

•Refer also to the manuals supplied with your equipment.

7To change the transmittable signals for

operating other manufacturers’ TV

1. Press and hold

STANDBY/ON TV.

2. Press TV.

Enter the manufacturer’s code

using the number buttons

(1–9, 0).

See the right to find the code.

4. Release STANDBY/ON TV.

You can perform the following operations on the TV:

STANDBY/ON TV : Turns on or off the TV.

TV VOL + or –:Adjusts the volume.

TV/VIDEO : Sets the input mode (either TV or

VIDEO).

After pressing TV, you can perform the following operations on

a TV:

TV/DBS CH + or –:Changes the channels.

1 – 9, 0, 100+ : Selects the channels.

For channel number 5, press 5.

For channel number 10, press 1, then 0.

For channel number 23, press 2, then 3.

For channel number 135, press 100+,

3, then 5.

TV RETURN will function as the

ENTER button if your equipment

requires pressing ENTER after

selecting a channel number.

VCRDBS TV AUDIO

STANDBY/ON

Notes:

•Refer also to the manual supplied for your TV.

•All the functions listed on the left may not be assigned to the

buttons for some TVs.

•If you cannot change the channels of some TVs by pressing

the number buttons, press TV/DBS CH + or – for changing the

channels.

5. Try to operate your TV by pressing

STANDBY/ON TV.

When your TV turns on or off, you have entered the correct

code.

If there are more than one code listed for your brand of TV,

try each one until the correct one is entered.

Manufacturer Codes

JVC 00*, 02, 13, 14, 47, 74

Akai 01, 02

Blaupunkt 03, 04

Fisher 01, 05

Grundig 03, 06, 07

Hitachi 08 – 10, 49

Iraddio 02

Itt/Nokia 11, 12

Loewe 06, 15, 16

Magnavox 08, 17, 49

Mets 50 – 53

Mitsubishi 08, 18 – 20

Mivar 21

Nordmende 22, 23

Okano 15

Panasonic 24 – 27, 76

Philips 15, 17, 28, 75

Quelle 52 – 67

RCA/PROSC 08, 24, 29 – 31, 48

SABA 32, 33, 68 – 70

Samsung 06, 08, 16, 34, 35, 49

Sanyo 01, 05

Schneider 02, 15, 36

Sharp 37, 38, 77

Sony 39

Telefunken 40 – 42, 69

Thomson 71, 72

Toshiba 37, 43, 44

Zenith 45, 46

Manufactures’ codes for TV

Note:

•Manufacturers’ codes are subject to change without notice. If

they are changed, this remote control cannot operate the

equipment.

*“00” is the initial JVC code.

VCRDBS DVD

TAPETV CDR FM/AM

231

564

10/0+10

100+

EFFECT

TEST

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CENTER

REAR·L

REAR·R

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM63

Operating Other Manufacturers’ Equipment

Manufactures’ codes for DBS tuner

Manufacturer Codes

JVC 56, 57*, 67

Amstrad 43 – 49

Blaupunkt 30

Echostar 50, 51, 67

General Instrument 29

Goldstar 31

Grundig 32, 33

Hamlin/Re 01 – 05

Hirshmann 48, 52 – 55

Instrument 68

Itt/Nokia 34

Jerrold/G 06 – 14

Kathrein 52, 58 – 63

NEC 35, 36

Oak 15 – 17

Orbitech 48

Panasonic 18 – 20

Philips 37, 38

Pioneer 21, 22

RCA 65

Samsung 39, 40

Schwaiger 61, 64

Scientiff 23 – 25

Siemens 41, 42

Sony 66

Technisat 48

Tocom 26

Zenith 27, 28

7To change the transmittable signals for

operating other manufacturers’ DBS tuner

1. Press and hold

STANDBY/ON DBS.

2. Press DBS.

3. Enter the manufacturer’s code

using the number buttons

(1–9, 0).

See to the right to find the code.

4. Release STANDBY/ON DBS.

STANDBY/ON DBS : Turns on or off the DBS tuner.

After pressing DBS, you can perform the following operations

on a DBS tuner:

TV/DBS CH + or –:Changes the channels.

1 – 9, 0, 100+ : Selects the channels.

For channel number 5, press 5.

For channel number 10, press 1, then 0.

For channel number 23, press 2, then 3.

For channel number 135, press 100+, 3,

then 5.

TV RETURN will function as the

ENTER button if your equipment

requires pressing ENTER after selecting a

channel number.

Note:

•Refer also to the manual supplied for your DBS tuner.

5. Try to operate your DBS tuner by pressing

STANDBY/ON DBS.

When your DBS tuner turns on or off, you have entered the

correct code.

If there are more than one code listed for your brand of DBS

tuner, try each one until the correct one is entered.

VCRDBS DVD

TAPETV CDR FM/AM

231

564

10/0+10

100+

EFFECT

TEST

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CENTER

REAR·L

REAR·R

VCRDBS TV AUDIO

STANDBY/ON

*“57” is the initial JVC code.

Note:

•Manufacturers’ codes are subject to change without notice. If

they are changed, this remote control cannot operate the

equipment.

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM64

Operating Other Manufacturers’ Equipment

7To change the transmittable signals for

operating other manufacturers’ VCR

1. Press and hold

STANDBY/ON VCR.

2. Press VCR.

3. Enter the manufacturer’s code

using the number buttons (1–9, 0).

See the right to find the code.

4. Release STANDBY/ON VCR.

STANDBY/ON VCR : Turns on or off the VCR.

After pressing VCR, you can perform the following operations

on a VCR:

1 – 9, 0 : Selects the TV channels on a VCR.

For channel number 5, press 5.

For channel number 10, press 1, then 0.

For channel number 23, press 2, then 3.

TV RETURN will function as the ENTER button if

your equipment requires pressing ENTER after

selecting a channel number.

3:Starts playing.

REW : Rewinds a tape.

FF : Fast-winds a tape.

7:Stops operations.

8:Pauses playing. To release it, press 3.

Note:

•Refer also to the manual supplied for your VCR.

VCRDBS TV AUDIO

STANDBY/ON

VCRDBS DVD

TAPETV CDR FM/AM

Manufactures’ codes for VCR

Manufacturer Codes

JVC 00*, 26 – 29, 58

Aiwa 01, 02

Bell & Howell 03

Blaupunkt 04, 05

CGM 06, 07

Emerson 08, 10 – 12, 64, 65

Fisher 03, 14 – 17

Funai 01

GE 18 – 20

Goldstar 07

Goodmans 13, 21

Grundig 06, 22

Hitachi 18, 23 – 25, 66

Loewe 07, 21

Magnavox 04, 19, 24

Mitsubishi 30 – 35

NEC 26, 27

Nokia 03, 36

Nordmende 38

Orion 09

Panasonic 19, 24, 39, 40

Philips 04, 19, 21, 24, 41, 42

Phonola 21

RCA/PROSC 04, 18, 19, 23, 24, 43 – 45

SABA 38, 46

Samsung 45, 47, 59, 61 – 63

Sanyo 03, 48, 49

Sharp 37, 50

Siemens 03, 51

Sony 52 – 54

Telefunken 55, 60

Toshiba 43, 44

Zenith 56, 57

Note:

•Manufacturers’ codes are subject to change without notice. If

they are changed, this remote control cannot operate the

equipment.

*“00” is the initial JVC code.

5. Try to operate your VCR by pressing

STANDBY/ON VCR.

When your VCR turns on or off, you have entered the correct

code.

If there are more than one code listed for your brand of

VCR, try each one until the correct one is entered.

231

564

10/0+10

100+

EFFECT

TEST

SURR ON/OFF

SURR MODE

–

SUBWOOFER

CENTER

REAR·L

REAR·R

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM65

General Notes

In general, you will have the best performance by keeping your discs

and mechanism clean.

•Store discs in their cases, and keep them in cabinets or on shelves.

Handling Discs

•Remove the disc from its case by holding it at the edge while

pressing the center hole lightly.

•Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

•Be careful not to scratch the surface of the disc when placing it

back in its case.

•Avoid exposure to direct sunlight, temperature extremes, and

moisture.

To get the best performance of the system, keep your discs and mechanism clean.

Cleaning Discs

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record

cleaner, spray, thinner, or benzine—to clean the disc.

Cleaning the Unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained,

wipe it with a cloth soaked in water-diluted neutral detergent and

wrung well, then wipe clean with a dry cloth.

•Since the unit may deteriorate in quality, become damaged or get

its paint peeled off, be careful about the following.

—DO NOT wipe it with a hard cloth.

—DO NOT wipe it strong.

—DO NOT wipe it with thinner or benzine.

—

DO NOT apply any volatile substances such as insecticides to it.

—DO NOT allow any rubber or plastic to remain in contact with

it for a long time.

Maintenance

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM66

Troubleshooting

Use this chart to help you solve daily operational problems. If there is any problem you cannot solve, contact your dealer.

PROBLEM

The power does not come on.

No sound from speakers.

Sound from one speaker only.

“OVERLOAD” starts flashing on the

display.

The STANDBY lamp lights up after

turning on the power, but soon the unit

turns off (into standby mode).

Remote control does not operate as you

intend.

Remote control does not work.

SOLUTION

Plug the power cord into an AC outlet.

Check speaker wiring and reconnect if

necessary.

Connect the cord properly (see pages 7 to

10).

Select the correct source.

Press MUTING to cancel the muting.

Select the correct input mode (analog or

digital).

Check connections.

Adjust the balance properly (see pages 24 or

52).

1. Press STANDBY/ON on the front

panel to turn off the unit.

2. Stop the playback source.

3. Turn on the unit again, and adjust the

volume.

Press STANDBY/ON on the front panel

to turn off the unit, then check the speaker

wiring.

If “OVERLOAD” does not disappear,

unplug the AC power cord, then plug it back

again.

If speaker wiring is not short-circuited,

contact your dealer.

Press STANDBY/ON on the front panel

to turn off the unit. After unplugging the

power cord, consult your dealer.

Press CONTROL (see page 24) or a source

selecting button first, then press the buttons

you want to use.

Come closer to the unit. Operate the remote

control within 23 ft (7 m) from the unit.

Remove the obstruction.

Aim the remote control at the remote sensor

on each component you want to operate.

Insert the batteries correctly.

Replace batteries.

Enter the correct manufacturers’ code (see

pages 63 to 65).

POSSIBLE CAUSE

The power cord is not plugged in.

Speaker signal cables are not

connected.

The audio cable is not connected

properly.

An incorrect source is selected.

Muting is activated.

An incorrect input mode (analog or

digital) is selected.

Connections are incorrect.

The balance is set to one extreme.

Speakers are overloaded because of

high volume.

Speakers are overloaded because of

short circuit of speaker terminals.

The unit is overloaded because of a

high voltage.

The remote control is not ready for

your intended operation.

It is too far from the unit, or is not

facing the unit.

There is an obstruction hiding the

remote sensor on the unit.

The remote control is not aimed at the

remote sensor on the unit or

components.

The batteries have been inserted into

the wrong way round (+/–).

Batteries are weak.

The remote control signals are not set

correctly.

7Genaral

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM67

POSSIBLE CAUSE

The video cord is not connected

correctly.

TV input selection is incorrect.

The disc is not playable.

The scanning mode is set to

“PROGRESSIVE” though the unit is

connected to the TV which does not

support the progressive video input,

such as a conventional TV.

The loaded disc may be illegally

copied.

The unit’s and disc’s Region Code

numbers are incompatible.

Parental Lock is in use.

The disc is loaded with its label and

data sides inverted.

The unplayable disc is loaded.

The disc is scratched or dirty.

A VCR is connected between the unit

and the TV.

With some discs, a picture may be

blurred when setting “PROGRESSIVE

MODE” to “FILM” or “AUTO.”

The current track prohibits you from

playing back with stereo sound.

“MONITOR TYPE” is not set correctly.

The TV is not set correctly.

The video output mode setting is

incorrect.

PROBLEM

No picture is displayed on the TV.

No picture is displayed on the TV

screen, the picture is blurred, or the

picture is divided into two parts.

No sound is heard and “NO AUDIO”

appears on the display.

A disc cannot be played.

A disc cannot be played and “0:00”

appears on the display.

Video and audio are distorted.

“MULTI CH” or “L/R ONLY” appears

on the display.

The picture does not fit the TV screen

properly.

One-touch DVD playback does not

work though you have connected AV

COMPU LINK cord correctly.

No subtitle appears on the TV screen

though you have selected as your initial

subtitle language.

Audio language is different from the

one you have selected as your initial

audio language.

SOLUTION

Connect the cord correctly (see pages 8 and

9).

Select the correct input on the TV.

Replace the disc (see page 29).

Change the scanning mode to

“INTERLACE” (see page 14).

Consult with the disc vendor.

Replace the disc (see page 29).

Enter your password to change the parental

level (see pages 55 and 56).

Insert the disc correctly (see page 15).

Replace the disc (see page 29).

Replace or clean the disc (see page 66).

Connect the unit and TV directly.

Set “PROGRESSIVE MODE” to “VIDEO”

(see page 51).

Activate Surround mode (see page 43) or

listen to another track.

Set the monitor type correctly (see page 51).

Set the TV correctly.

Set the video output mode correctly

according to the video connection between

your TV and the unit (see page 22).

Some discs are programmed to always

display no subtitle initially. If this happens,

press SUBTITLE on the remote control

after starting play (see page 35).

Some discs are programmed to always use

the original language initially. If this

happens, press AUDIO on the remote

control after starting play (see page 35).

7For DVD Player

Troubleshooting

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM68

7For Tuner

Troubleshooting

PROBLEM

Hard to listen to broadcast because of

noise.

Continuous hiss or buzzing during FM

reception.

Occasional cracking noise during FM

reception.

POSSIBLE CAUSE

The AM loop antenna is too close to the

unit.

The supplied FM antenna is not

properly extended and positioned.

Incoming signal is too weak.

The station is too far away.

An incorrect antenna is used.

Antennas are not connected properly.

Ignition noise from automobiles.

SOLUTION

Change the position and direction of the AM

loop antenna.

Extend the FM antenna at the best position.

Connect an outdoor FM antenna or contact

your dealer.

Select a new station.

Check with your dealer to be sure you have a

correct antenna.

Check connections.

Move the antenna farther from automobile

traffic.

7For MP3

SOLUTION

Replace the disc.

Add the file extension—.mp3, .Mp3, .mP3,

or .MP3—to their file names (see page 45).

This unit cannot play back such files.

Replace the disc.

Replace the disc. (Record MP3 files using a

compliant application.)

When both MP3 files and JPEG files are

recorded on a disc, to play MP3 files, set the

MP3/JPEG setting to “MP3” (see page 52).

POSSIBLE CAUSE

No MP3 files are recorded on the disc.

The disc is unplayable (such as CD-

ROM).

MP3 files do not have the correct file

extension—.mp3, .Mp3, .mP3, or .MP3

in their file names.

MP3 files are made at bit rate under

64 kbps.

MP3 files are not recorded in the format

compliant with ISO 9660 Level 1 or 2.

The MP3/JPEG setting is set to

“JPEG.”

PROBLEM

A disc cannot be played.

No MP3 files except JPEG files are

played.

7For JPEG

PROBLEM

A disc cannot be played.

No JPEG files except MP3 files are

played.

SOLUTION

Replace the disc.

Add the file extension—.jpg, .jpeg, .JPG,

.JPEG or any uppercase and lowercase

combination (such as “.Jpg”)—to their file

names (see page 47).

This unit cannot play back such files.

Replace the disc.

Replace the disc. (Record JPEG files using a

compliant application.)

When both MP3 files and JPEG files are

recorded on a disc, to play JPEG files, set

the MP3/JPEG setting to “JPEG” (see page

52).

POSSIBLE CAUSE

No JPEG files are recorded on the disc.

The disc is unplayable (such as CD-

ROM).

JPEG files do not have the correct file

extension in their file names.

JPEG files are not made with baseline

JPEG format.

JPEG files are not recorded in the

format compliant with ISO 9660 Level

1 or 2.

The MP3/JPEG setting is set to “MP3.”

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM69

Designs & specifications are subject to change without notice.

Specifications

Amplifier

Output Power At Stereo operation:

Front channels: 100 W per channel, min. RMS, driven into 8 ΩΩ

ΩΩ

Ω,

40 Hz to 20 kHz with no more than 0.8% total

harmonic distortion.

At Surround operation:

Front channels: 100 W per channel, min. RMS, driven into 8 Ω

at 1 kHz, with no more than 0.8% total harmonic

distortion.

Center channel: 100 W, min. RMS, driven into 8 Ω

at 1 kHz, with no more than 0.8% total harmonic

distortion.

Rear channels: 100 W per channel, min. RMS, driven into 8 Ω

at 1 kHz, with no more than 0.8% total harmonic

distortion.

Audio

Audio Input Sensitivity/Impedance (1 kHz): TV, TAPE/CDR, DBS, VCR: 240 mV/47 kΩ

Audio Input (DIGITAL IN)* : Coaxial: DIGITAL 1 (DBS): 0.5 V(p-p)/75 Ω

Optical: DIGITAL 2 (TV): –21 dBm to –15 dBm (660 nm ±30 nm)

* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround

(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Signal-to-Noise Ratio (’66 IHF/’78 IHF): TV, TAPE/CDR, DBS, VCR: 87 dB/67 dB

Frequency Response (8 Ω): TV, TAPE/CDR, DBS, VCR: 20 Hz to 20 kHz (±1 dB)

Tone Control: Bass (100 Hz): ±10 dB ±2 dB

Treble (10 kHz): ±10 dB ±2 dB

Video

Video Input Sensitivity/Impedance (1 kHz):

Composite video: DBS IN, VCR IN: 1 V(p-p)/75 Ω

S-video: DBS IN, VCR IN: (Y:luminance): 1 V(p-p)/75 Ω

(C:chrominance): 0.286 V(p-p)/75 Ω

Video Output Level/Impedance (1 kHz):

Composite video: VCR OUT, MONITOR OUT:

1 V(p-p)/75 Ω

S-video: VCR OUT, MONITOR OUT:

(Y:luminance): 1 V(p-p)/75 Ω

(C:chrominance): 0.286 V(p-p)/75 Ω

Component video: DVD COMPONENT VIDEO OUT:

(Component-Y): 1.0 V(p-p)/75 Ω

(Component-PB/PR): 0.7 V(p-p)/75 Ω

Color System: NTSC

Horizontal Resolution: 500 lines

Signal-to-Noise Ratio (S/N): 63 dB

Synchronize: Negative

FM tuner (IHF)

Tuning Range: 87.5 MHz to 108.0 MHz

AM tuner

Tuning Range: 530 kHz to 1 710 kHz

General

Power Requirements: AC 120V , 60 Hz

Power Consumption: 200 W/255 VA (in operation)

2 W (in standby mode)

Dimensions (W x H x D): 435 mm x 100 mm x 403.5 mm

(17 3/16 in. x 3 15/16 in. x 15 14/16 in.)

Mass: 7.9 kg (17.4 lbs)

EN59-70RX-DV5SL[J]f.pm5 02.8.1, 1:54 AM70

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND

IN COMMONWEALTH OF PUERTO RICO.

WHAT WE WILL DO:

If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.

Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service

centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts

thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen

size 25 inches and above which are covered on an in-home basis.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized

service center, please call toll free: (800) 537-5722.

If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with

a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the

name and location of which will be given to you by the toll-free number.

If you have any questions concerning your JVC Product, please contact our Customer Relations Department.

WHAT IS NOT COVERED:

This limited warranty provided by JVC does not cover:

1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty

installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by

JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number

or serial number has been altered, tampered with, defaced or removed;

2. Initial installation and installation and removal for repair;

3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;

4. Damage that occurs in shipment, due to act of God, and cosmetic damage;

5. Signal reception problems and failures due to line power surge;

6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;

7. Accessories;

8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);

There are no express warranties except as listed above.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS

LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.

JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER

DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE

TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH

OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an

implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific

legal rights and you may also have other rights which vary from state to state.

LIMITED WARRANTY

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE

ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date

of original retail purchase for the period as shown below. ("The Warranty Period")

PARTS LABOR

DAYS

JVC COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORP.

1700 Valley Road

Wayne, NJ 07470

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF

REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION

PACKAGED WITH EACH REFURBISHED PRODUCT.

For customer use:

Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information

for future reference.

Model No. : Serial No. :

Purchase data : Name of dealer :

CONSUMER VIDEO 1-90

BT-51005-5(0301)

RX-DV5SL[J]warranty_f.pm5 02.8.1, 1:54 AM2

BT-51005-5

(0301)

QUALITY SERVICE

HOW TO LOCATE YOUR JVC SERVICE CENTER

Dear Customer,

In order to receive the most satisfaction from your purchase,please read the instruction booklet before

operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest

authorized servicer or visit our website at www.JVC.com

Remember to retain your Bill of Sale for Warranty Service.

Do not service the television yourself

Caution

To prevent electrical shock,do not open the cabinet.There are no user serviceable

parts inside.

Please refer to qualified service personnel for repairs.

Accessories

To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or

on the web at www.JVC.com

TOLL FREE: 1 (800) 537-5722

http://www.jvc.com

Authorized Service Centers

RX-DV5SL[J]warranty_f.pm5 02.8.1, 1:54 AM3

VICTOR COMPANY OF JAPAN, LIMITED

0802NHMMDWJEM

RX-DV5SL[J]cover_f.pm5 02.8.1, 1:59 AM2

JVC RX DV5SL DV5SL[J]cover_f.pm5 User Manual LVT0876 001A

RX-DV5SL LVT0876-001A

Navigation menu

Versions of this User Manual:

Views

Navigation