JVC SR HD2500EU HD2500 User Manual HD2500EU, HD2500US LST1352 001B H

User Manual: JVC SR-HD2500EU SR-HD2500EU, SR-HD2500US nglish, Separatevolume1

Open the PDF directly: View PDF PDF.
Page Count: 2

Page 17 in the instruction manual
Connecting using a component video cable
Wrong:
Memo :
●After connecting a component video cable, change the unit
setting to “COMPONENT OUTPUT”.
For more details, refer to “COMPONENT OUTPUT” (A page85) .
Correct:
Memo :
●After connecting a component video cable, change the unit
setting to “SDI/COMPONENT OUTPUT”.
For more details, refer to “SDI/COMPONENT OUTPUT”
(A page85) .
Page 77 in the instruction manual
Wrong:
HDMI VIDEO MODE ........................................ (A page 85)
Correct:
VIDEO PRIORITY MODE ................................ (A page 85)
Wrong:
COMPONENT OUTPUT ................................... (A page 85)
Correct:
SDI/COMPONENT OUTPUT ............................ (A page 85)
Page 83 in the instruction manual
䡲HDMI CONNECTION
Wrong:
Memo :
●During data output from the [HDMI] terminal, setting to“SDI/
COMPONENT” automatically outputs data in the
“COMPONENT OUTPUT” setting.
●During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to “SDI/COMPONENT”
automatically outputs data in the “COMPONENT OUTPUT”
setting.
Correct:
Memo :
●During data output from the [HDMI] terminal, setting to “SDI/
COMPONENT” automatically outputs data in the “SDI/
COMPONENT OUTPUT” setting.
●During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to “SDI/COMPONENT”
automatically outputs data in the “SDI/COMPONENT
OUTPUT” setting.
Page 84 in the instruction manual
●
HDMI OUTPUT RESOLUTION
Wrong:
Memo :
In this case, set “HDMI VIDEO MODE” to “OFF”.
OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals may be
cut off with the above conditions even when “OFF” is selected.
Correct:
Memo :
In this case, set “VIDEO PRIORITY MODE” to “SDI/
COMPONENT”.
OSD of the [VIDEO OUT]/[S-VIDEO OUT] terminals may be
cut off with the above conditions even when “SDI/
COMPONENT” is selected.
Page 85 in the instruction manual
Wrong:
䡲COMPONENT OUTPUT
Memo :
●If “HDMI VIDEO MODE” is set to “ON”, the unit will output at
“480i” regardless of the current setting.
●If “HDMI VIDEO MODE” is set to “OFF”, or when a HDMI
connection is used, DVD videos will be output at “480p” even if
“720p” or “1080i” has been set.
Correct:
䡲SDI/COMPONENT OUTPUT
Memo :
●If “VIDEO PRIORITY MODE” is set to “HDMI”, the unit will
output at “480i” regardless of the current setting.
●If “VIDEO PRIORITY MODE” is set to “SDI/COMPONENT”, or
when a HDMI connection is used, DVD videos will be output at
“480p” even if “720p” or “1080i” has been set.
Page 111 in the instruction manual
Wrong:
COMPONENT OUTPUT ............................................... 85
Correct:
SDI/COMPONENT OUTPUT ........................................ 85
Errata for SR-HD2500 (All Models)
SR-HD2500_SHEET.fm 1 ページ ２０１２年７月１２日　木曜日　午前１０時１０分
LST1352-001B©2012 JVC KENWOOD Corporation
Page 105 in the instruction manual
Wrong:
Correct:
Problem Symptom Action Reference
Page
The aspect ratios of
the HDMI output and
component output are
different
When two monitors are connected
respectively to the HDMI output and
component output terminals of this
unit, the screen aspect ratio of the
component output may not be
appropriate if “HDMI VIDEO MODE” is
set to “ON”.
When two monitors are connected
simultaneously, users are recommended
to set “HDMI VIDEO MODE” to “OFF”.
(A page 85)
Problem Symptom Action Reference
Page
The aspect ratios of
the HDMI output and
component output are
different
When two monitors are connected
respectively to the HDMI output and
component output terminals of this
unit, the screen aspect ratio of the
component output may not be
appropriate if “VIDEO PRIORITY
MODE” is set to “HDMI”.
When two monitors are connected
simultaneously, users are recommended
to set “VIDEO PRIORITY MODE” to “SDI/
COMPONENT”.
(A page 85)
SR-HD2500_SHEET.fm 2 ページ ２０１２年７月１２日　木曜日　午前１０時１０分

Navigation menu