JVC XV N330B N330B/XV N332S User Manual N330B, GNT0068 002B
XV-N332S XV-N332S GNT0068-002B English,
User Manual: JVC XV-N330B XV-N330B, XV-N332S English,
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
DVD PLAYER XV-N330B XV-N332S Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ® The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. VIDEO GNT0068-002B[UC] EN 0206KTC-MW-SC ©2006 Victor Company of Japan, Limited Region code of DVD VIDEO This player can play back DVD VIDEO discs whose region code numbers include “1.” Examples of playable DVD VIDEO discs: ALL 1 15 1 2 3 4 123 456 The player’s region code is printed on the rear of the player WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Note of Color system format This player accommodates the NTSC system, and also can play back discs recorded with PAL system. (PAL video signals are converted to a NTSC signal and output.) For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Supplied accessories If anything is missing, consult your dealer immediately. • Audio/video cable (Yellow/White/Red) (x 1) • Remote control (x 1) • R6(SUM-3)/AA(15F) battery (x 2) For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. Attention –– Touche STANDBY/ON! Déconnecter la fiche de secteur pour couper complètement le courant. La touche STANDBY/ON ne coupe jamais complètement la ligne de secteur, quelle que soit sa position. Le courant peut être télécommandé. CAUTION THIS PRODUCT USES A LASER SYSTEM. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. ATTENTION: CE PRODUIT UTILISE UN SYSTEME LASER. UN EMPLOI DES COMMANDES, RÉGLAGES OU PROCÉDURES DE PERFORMANCE AUTRE QUE CELUI SPÉCIFIÉ DANS CE DOCUMENT RISQUE D’ENTRAÎNER UNE EXPOSITION DANGEREUSE AUX RAYONNEMENTS. NE PAS OUVRIR NI RÉPARER DE VOUS-MÊME. FAIRE APPEL À UN PERSONNEL QUALIFIÉ POUR L’ENTRETIEN. Installing the batteries in the remote control Turning on and off the player MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE OFF ON SCREEN LANGUAGE ENGLISH • To insert an 8-cm disc, place it in the inner recess. 3 Press 0 to close the disc tray. Basic playback Buttons To do 3* Start/resume normal Playback 7 Stop • When RESUME is ON or DISC RESUME, this player memorizes the position on the disc where you interrupted playback. – To resume playback, press 3. – To stop playback completely, press 7 again. 8* DVD PLAYER SETUP SCREEN SAVER BACKGROUND STANDARD Point toward the remote sensor directly as possible (the operating range is approx. 5 m.) ON The batteries will last about six months with normal use. If the functions of the remote control become erratic, replace the batteries. 3 Press 5/∞ to select the monitor type, then press ENTER. • For a normal (conventional) TV, select “4:3 LB” or “4:3 PS.” (See “MONITOR TYPE” in “Initial settings.”) • For a wide-screen TV, select “16:9.” DOLBY DIGITAL/PCM ANALOG DOWNMIX DOLBY PROLOGIC DOLBY DIGITAL/PCM D.RANGE CONTROL STREAM/PCM ON OUTPUT LEVEL STANDARD 4 Press 5/∞ to select a desired digital output signal type, then press ENTER. Set this item correctly according to the logo on your receiver or decoder. (If you do not connect the player to such a device, press ENTER to finish the setting.) • Receiver/decoder bearing Dolby Digital logo and no DTS, select “DOLBY DIGITAL/PCM.” • Receiver/decoder bearing both Dolby Digital and DTS logos, select “STREAM/PCM.” • Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital recorder, select “PCM ONLY.” STANDBY/ON. To bring up the DVD PLAYER SETUP display later Press SET UP for a few seconds until the DVD PLAYER SETUP display appears. 5 XV-330B/N332S[UC]EN1.indd 1 When playing a disc with low quality recording conditions or scratches About On-screen guide icons : Playback. If the disc is poorly recorded or the disc is of poor quality, there may be problems with playback or discs cannot be played back at all. TRACK ADJUST function allows you to play back such discs with better quality. Each time you press TRACK ADJUST, the mode of the function appears on the TV screen and changes as follows: TRACK ADJUST OFF = TRACK ADJUST MODE 1 = TRACK ADJUST MODE 2 Select TRACK ADJUST MODE 1 or MODE 2 which gives you better results. To return to the normal playback mode, select TRACK ADJUST OFF. • Opening the disc tray will set the function to off. • This function is not available for some discs. • If the disc cannot be played back, try to set the TRACK ADJUST mode before you close the tray. : Pause. Turning on and off the player The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. / / VID EO RIG HT AUD IO LEF T PCM /STCOAXIAL REA M DIG ITAL OUT S-VID EO LEFT VIDE VIDE O OO UT Audio/video cable* (supplied) The player PR Y Yellow RIG PB HT AUD IO O UT Red White Connecting to a TV with component jacks Connecting to a stereo audio amplifier (receiver) PB LEFT Y RIGHT PB EO RIGHT Y OAXIAL VIDEO PR AUDIO OUT VIDEO OUT LEFT S-VIDEO OUT VIDEO To analog audio input PR AUDIO OUT VIDEO OUT Connecting to a digital audio device To enjoy high-quality surround sound, connect the DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder. To component video input To switch the scanning mode between Progressive and Interlace, press and hold VFP-I/P on the remote control for a few seconds. NOTES • Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)” correctly. • When using the component (Y, PB, PR) jacks, do not connect the S-VIDEO jack with the player. About the scanning mode indicator PB RIGHT S-VIDEO DIGITAL OUT VIDEO PR VIDEO OUT AUDIO OUT To analog audio input Source type of DVD VIDEO Film source Video source [DDP] [P] [DDP] [DDP] [P] LEFT Y COAXIAL PCM/STREAM To digital audio input NOTES • Depending on the disc, no signal may be outputted from the DIGITAL OUT. Make an analog connection in this case. • Set [DIGITAL AUDIO OUTPUT] in the [AUDIO] preference display correctly according to the connected digital audio equipment. (See “DIGITAL AUDIO OUTPUT” in “Initial settings.”) [P] 4 Changing the display window contents STANDBY/ON Pause • Each time you press 8 on the remote control, the still picture advances to the next frame. ¡/1 Fast forward/backward (While paused) Slow-motion playback • Each time you press the button, the playback speed changes. – SLOW + THUMBNAIL/ LIST ENTER SET UP MENU PREVIOUS : Slow-motion playback with the current speed. : Fast forward/backward playback with the current speed. : At the beginning of a scene containing multiangle views. : At the beginning of a scene containing multiaudio sounds. : At the beginning of a scene containing multisubtitles. You can change the setting so that the on-screen guide icons do not appear on the TV screen. (See “ON SCREEN GUIDE” in “Initial settings.”) 6 VARI-PLAY (For DVD Video) (variable You can change the playback playback) speed with the sound (except for DTS) and subtitles. To playback 1.2 or 1.5 times faster, press VARI-PLAY on the player or ¡ on the remote control. To playback 0.8 or 0.6 times slower, press ¡ on the remote control while playback is paused. (For SVCD/VCD) The disc is played back at about 2 times faster than normal. (Only for DVD Video) The playback position moves back 10 seconds before the current position (only within the same title). * 38 on the player starts/pauses playback. Changing the display brightness Press DIMMER to change the brightness of the display window. NEXT SELECT CLEAR 1 2 3 4 5 6 7 8 9 CANCEL RETURN 0 TITLE/ GROUP SOUND EFFECT ANGLE SUBTITLE SLIDE EFFECT Each time you press DISPLAY, the display window contents changes. DISPLAY ON SCREEN TOP MENU VFP I/P DIMMER AUDIO ZOOM Locating the beginning of a scene or song You can select a title/chapter/ track directly and start playback. For DVD Video: (While stopped) select title. (While playing back) select chapter. For SVCD/VCD/CD: Select track. To select 5: press 5. To select 23: press 2, then 3. To select 40: press 4, then 0. • If you press TITLE/GROUP before entering the number, you can select the title instead of the chapter. Using the disc menu You can operate a disc—SVCD/ VCD with Playback Control* (PBC)—using the disc menu shown on the TV screen. * A method of controlling disc play for SVCD/VCD by using the disc menu. ¢/4 Skip chapter/track • If you press and hold the button during playback, playback is advanced/reversed at 5 times normal speed. Main display • Each indicator lights up when corresponding function/mode is activated, or corresponding information is on the main display. DVD PLAYER SETUP PCM ONLY EO REAM OPEN/ CLOSE With the label side up the preference displays, etc., then press ENTER. Press NOTES • If a disc gets dirty, scratched or warped, or due to the disc characteristics or recording conditions, the player may not be able to play back such discs. • The player can play back audio signals recorded in MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT. • With some discs, operations may not be possible. * To play back DTS-encoded DVD VIDEO or DTSencoded Audio CD discs correctly, connect the player to an amplifier with a built-in DTS decoder. Otherwise, playback sound will be distorted. Unplayable discs If you try to play back discs listed below, noise may be generated and causes damage to speakers. • DVD-R/-RW written in the VR format • DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM, PHOTO CD, SACD • Unfinalized discs • Discs of irregular shape or discs with tape, seals or paste on either the label side or playback side. Playing back these discs may damage the player. NOTES • If your TV has a monaural audio input instead of stereo, use an optional audio cable which converts stereo audio output to monaural. • If your TV is a HDTV or HD-ready TV, you can connect with component (Y, PB, PR) jacks. By connecting with component (Y, PB, PR) jacks, you can select the progressive scanning mode which provides the best picture quality. * The S-VIDEO jack and component (Y, PB, PR) jacks cannot be used at the same time. When using the S-VIDEO jack, do not connect the component (Y, PB, PR) jacks with the player. S-VID Linear PCM, Dolby Digital, DTS (Digital Theater Systems)* Open/close the disc tray 1 Press 0 to open the disc tray. 2 Place a disc in the disc tray. 2 Press 5/∞ to select the on-screen language for 4:3 L.B. TV IN Advanced Operations SPANISH 16:9 AUTOLB 4:3 4:3 PS S-video cable* (not supplied) 3 FRENCH PICTURE SOURCE Basic Connection NOTE Some progressive TV and High-Definition TV sets are not fully compatible with the player. To check the compatibility of your TV, contact your local JVC customer service center. ENGLISH MONITOR TYPE Before making connections: • Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem. [PICTURE SOURCE] of the PICTURE menu AUTO FILM VIDEO(NORMAL)/ (ACTIVE) DVD PLAYER SETUP DIGITAL AUDIO OUTPUT VIDEO • DVD-R/-RW, +R/+RW written and finalized in the DVD VIDEO format • CD-R/RW written in the SVCD, Video CD or Audio CD format • CD-R/RW written in MP3/JPEG in accordance with the “ISO 9660” format Supported Digital audio formats: Insert a disc Before enjoying this player, make the initial settings as follows: 1 Press ENTER. Precautions of the safe use of batteries Observe the following precautions for the safe use of batteries. If they are used improperly their lives will be shortened, they may burst or their contents may leak. • Remove the batteries from the remote control if it is not going to be used for a long period of time. • Remove dead batteries and dispose of them properly. • Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator. • Never touch liquid that has leaked out of a battery. • Do not mix new and old batteries, or batteries of different types, when placing them. Connections • DVD VIDEO, Audio CD, Video CD, SVCD Turning on and off the player EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO SETTING YES - PRESS ENTER NO - PRESS CANCEL Open the compartment cover, and place the two supplied R6(SUM-3)/AA(15F) batteries in the remote control according to the polarity markings (“+” and “–”) inside the compartment. Then replace the cover. Notes on the power cord • When you are away on travel or otherwise for an extended period of time, remove the plug from the wall outlet. A small amount of power (1.0 W) is always consumed while the power cord is connected to the wall outlet. • When unplugging the player from the wall outlet, always pull the plug, not the power cord. • Do not handle the power cord with wet hands. • Disconnect the power cord before cleaning the player or moving the player. • Do not alter, twist or pull the power cord, or put anything heavy on it, which may cause fire, electric shock, or other accidents. • If the cord is damaged, consult a dealer and have the power cord replaced with a new one. Avoid moisture, water, dust, and high temperatures • Do not place the player in moist or dusty places. • If water gets inside the player, turn off the power and remove the plug from the wall outlet, then consult your dealer. Using the player in this state may cause a fire or electrical shock. • Do not expose the player to direct sunlight or place it near a heating device. Notes on installation • Select a place which is level, dry and neither too hot nor too cold between 5˚C and 35˚C. • Leave sufficient distance between the player and the TV. • Do not install the player in a place subject to vibrations. • Do not put heavy objects on the player. To prevent malfunction of the player • There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer. • Do not insert any metallic objects, such as wires, hairpins, coins, etc. into the player. • Do not block the vents. Blocking the vents may damage the player. To clean the cabinet • Use a soft cloth. Follow the relevant instructions on the use of chemically-coated cloths. • Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring. Basic Operations When you turn on the player for the first time after purchase, the following message appears on the TV screen. After all other connections have been made, insert the AC power plug to the wall outlet firmly. Playable discs Precautions 2 Initial setup Inserting the AC power plug CAUTION: • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any open flame sources, such as lighted candles, on the apparatus. • When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. • Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. ATTENTION: • Ne bloquez pas les orifices ou les trous de ventilation. (Si les orifices ou les trous de ventilation sont bloqués par un journal un tissu, etc., la chaleur peut ne pas être évacuée correctement de l’appareil.) • Ne placez aucune source de flamme nue, telle qu’une bougie, sur l’appareil. • Lors de la mise au rebut des piles, veuillez prendre en considération les problèmes de l’environnement et suivre strictement les règles et les lois locales sur la mise au rebut des piles. • N’exposez pas cet appareil à la pluie, à l’humidité, à un égouttement ou à des éclaboussures et ne placez pas des objets remplis de liquide, tels qu’un vase, sur l’appareil. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. 3. The mains plug shall remain readily operable. ATTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.: 1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil. 2. Ne pas exposer l’appareil à la pluie ni à l’humidité. 3. La prise secteur doit être opérationnelle. 1 Turning on the power CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT PRODUIT LASER DE CLASSE 1 REPRODUCTION D’ETIQUETTES ETIQUETTE D’AVERTISSEMENT A L’INTERIEUR DE L’APPAREIL For Canada/pour le Canada THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSIONS FORM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,” ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS. CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”, NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS. 7 For DVD 1 Press TOP MENU or MENU to show the disc menu. 2 Press 5/∞/2/3 to select a desired item, then press ENTER or 3 (SELECT). • With some discs, you can also select items by entering the number using the numeric buttons. 7 For SVCD/VCD 1 While stopped, press TOP MENU or 3 (SELECT) to show the menu. 2 Press the numeric buttons to select a desired item. To select 5: press 5. To select 23: press 2, then 3. To select 40: press 4, then 0. • To move to the next or previous page of the current menu, press ¢ or 4. • To return to the previous menu, press RETURN. To play back without PBC While stopped, press the numeric buttons instead of 3 (SELECT) to start playback. To reactivate PBC • Press TOP MENU or MENU. • Press 7 to stop playback, then 3 (SELECT). 7 Changing the language, sound and scene angle 1 Press the button. 2 Press the button repeatedly or 5/∞ to select the desired item. 3 Press ENTER to finish the setting. Buttons To do AUDIO For DVD Video: select audio languages. For SVCD/VCD: select the audio channel. SUBTITLE ANGLE Changing the picture tone (VFP) STANDBY/ON OPEN/ CLOSE – SLOW + TOP MENU THUMBNAIL/ LIST ENTER SET UP MENU PREVIOUS 1 select the view-angle. 2 4 3 5 7 Each time you press SOUND EFFECT, the Sound Effect mode changes. • As the value becomes bigger, the Sound Effect works stronger. 6 8 RETURN 0 TITLE/ GROUP SOUND EFFECT ANGLE SUBTITLE USER 1 GAMMA MID BRIGHTNESS + 4 CONTRAST +10 SATURATION +10 TINT +10 SHARPNESS LOW Y DELAY + 2 Selected Preset 9 CANCEL VFP I/P DIMMER AUDIO ZOOM SLIDE EFFECT Zooming the picture Each time you press ZOOM, the magnification changes. • You can use 5/∞/2/3 button to move the zoomed position. To return to the normal playback, select the normal size by pressing ZOOM repeatedly. NEXT SELECT CLEAR select the subtitle. Changing the Sound Field DISPLAY ON SCREEN The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences. 1 Press VFP-I/P. 2 Press 2/3 to select the desired preset. Parameter NORMAL For watching TV in a general room. CINEMA For watching a movie software in a room with suppressed light. USER1 You can adjust parameters USER2 that affect the picture character and store the settings as a user preset. See below. To adjust the picture tone 1 Select “USER1” or “USER2.” 2 Press 5/∞ to select a parameter, then press ENTER. GAMMA Adjust this if the neutral color is bright or dark. The brightness of dark and bright portion is maintained (LOW/MID/HIGH). BRIGHTNESS Adjust this if the picture is bright or dark on the whole (–16 (darkest) to +16 (brightest)). CONTRAST Adjust this if the far and near position is unnatural (–12 to +12). SATURATION Adjust this if the picture is whitish or blackish (–16 (blackest) to +16 (whitest)). TINT Adjust this if the appearance of flesh tone is unnatural (–16 to +16). SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH). Y DELAY Adjust this if the picture looks separately/ overlapped (–2 to +2). 3 Press 5/∞ to adjust the parameter, then press ENTER. 4 Repeat step 2 and 3 to adjust other parameters. 5 Press VFP-I/P to finish the setting. 8 2/14/06 9:46:36 AM Menu bar functions Audio/Video files playback Menu bar functions You can use various functions from the menu bar. selects the time mode shown in the display To bring up the menu bar window and the status bar. • TOTAL: Elapsed time of current title (DVD) or a disc (CD/VCD/SVCD) • T.REM: Remaining time of current title (DVD) or a disc (CD/VCD/SVCD) (Except for DVD: while stopped, disc total time) • TIME: Elapsed time of current chapter (DVD) or track (CD/VCD/SVCD) • REM: Remaining time of current chapter (DVD) or track (CD/VCD/SVCD) (while stopped, current track total time) When a disc is inserted, press ON SCREEN twice. A menu bar for the type of disc inserted will appear under the status bar. Ex.: Menu bar for DVD VIDEO To dismiss the menu bar and the status bar, press ON SCREEN. Basic operation procedure 1 Press 2/3 to select the icon you want to work with. 2 Press ENTER. selects repeat mode. DVD: During playback CD: In any condition VCD/SVCD: In any condition except PBC playback • CHAPTER: Current chapter repeat (DVD) • TITLE: Current title repeat (DVD) • TRACK: Current track repeat (CD/VCD/SVCD) • ALL: All track repeat (CD/VCD/SVCD) • A-B: A-B repeat (During playback). After selecting A-B, press ENTER at the beginning point of repeat, then press ENTER again at the end point. • OFF: Repeat mode deactivated. Select this to quit repeat mode. After pressing ENTER: (1) When a pull-down menu appears, press 5/∞ to select the setting you want, then press ENTER. (2) When a number-entry box appears, use the numeric buttons to enter the number you want, then press ENTER. (3) When changing setting, press ENTER repeatedly to select the setting you want. NOTES • The selected item on the menu bar is shown in green. • The available functions differ depending on the player status. Refer to the explanation below to check when you can use a certain function. specifies beginning point of a title (DVD) or a disc (CD/VCD/SVCD) by the time. DVD: In any condition CD: In any condition except program or random playback VCD/SVCD: In any condition except PBC or program or random playback selects the audio language (DVD), sound track (DVD), or audio channel (VCD/SVCD) during playback. selects a desired scene angle in a multiangle part (DVD only). specifies the playback order of tracks while stopped (unavailable for DVD). You can program up to 99 tracks. 1. After selecting icon, press the numeric buttons to specify tracks in the desired order. • To correct the program, press 5/∞ to move to the track to be corrected, then press CANCEL. The track is erased and the subsequent programmed tracks move up. Pressing 7 clears all the programmed tracks. 2. Press 3(SELECT) to start program playback. • During program playback, you cannot edit the program contents. • To exit the program mode, press ON SCREEN after clearing the program. Various playback mode Various JPEG files playback Precautions • To play back a disc continuously, select NORMAL. To zoom in a picture Selecting a specific file or group You can select files or folders (groups) using the Control display on the TV screen. Control display DISC CONTROL NORMAL activates random playback while stopped (unavailable for DVD). After selecting You can play back MP3/JPEG files on a CD/CD-R/RW. • Use “ISO 9660” as the disc format. • The player does not support “packet writing (UDF files)” discs. • The player supports discs recorded with up to five multiple sessions. • The player may be unable to play back a disc due to the characteristics or recording conditions. • The player recognizes up to the fifth layer of groups, 999 files per group (including unplayable files), and up to 250 groups per disc. • Add the appropriate extension (“.mp3” and “.jpg”) to the file name. • MP3i and MP3 Pro are not available. • The player cannot play back a picture of more than 5120 x 3413 pixels (baseline JPEG) or 2048 x 1536 pixels (progressive JPEG). selects the subtitle language (DVD) or subtitle (SVCD) during playback. GROUP -- MP3 PICT01.jpg SLIDESHOW PICT02.jpg MIX PICT03.jpg MUSIC01.mp3 Select these sections to show the upper layer. Current file MUSIC02.mp3 icon, press ENTER. The player starts random playback. Group column Current group Current playback mode specifies a chapter to play back from (DVD only). Troubleshooting Power Press ZOOM. Each time you press ZOOM, you can magnify a JPEG file (x1.5/x2). NOTE This function is not available for some JPEG files depending on their resolution size and JPEG format. Repeat playback 1. While stopped, press 5/∞/2/3 to move the cursor bar to playback mode. 2. Press ENTER repeatedly to select the desired repeat mode. • REPEAT 1: Repeats the current file. • REPEAT GROUP: Repeats all files in the current group. • REPEAT ALL: Repeats all files on the disc. 3. Press 3 to move the cursor bar to the file column, then press 3(SELECT). No picture is displayed on the TV screen or the screen is blurred or divided into two parts. Power does not come on. \ The player is in the progressive scanning mode though it is connected to a TV via the VIDEO or S-VIDEO jack. Observe the display window. If [P] is turned on, the player is in the progressive scanning mode. Make the Progressive scanning mode inactive by using the VFP - I/P button. \ Power plug is not inserted securely. Plug in securely. Operation “REGION CODE ERROR!” is shown on the TV. \ Region code of the inserted disc does not match the player. Check the region code of the disc printed on the disc jacket. To rotate/reflect a still picture While a still picture is played back: • Pressing 2/3 rotates the picture by 90°. • Pressing 5 reflects the picture vertically. • Pressing ∞ reflects the picture horizontally. Random playback 1. While stopped, press 5/∞/2/3 to move the cursor bar to playback mode. 2. Press ENTER repeatedly to select RANDOM. 3. Press 3 to move the cursor bar to the file column, then press 3(SELECT). 1. Press and hold THUMBNAIL/LIST while a JPEG file is selected on the Control display. 2. Press 5/∞/2/3 to select the desired picture, then press ENTER. • You can change the page of thumbnail list by pressing 4/¢. 1. While stopped, press 5/∞/2/3 to move the cursor bar to playback mode. 2. Press ENTER repeatedly to select PROGRAM. 3. Press 5/∞/2/3 to select the desired file, then press ENTER. 4. Repeat step 3 until all the desired files are selected. • To erase the last programmed file, press 2 to move the cursor bar to the programmed files column, then press CANCEL. 5. Press 3(SELECT). \ Set the [D.RANGE CONTROL] preference to [TV MODE]. \ Microcomputer malfunction due to lightning or static electricity. Turn off the power and unplug the power cord, then connect the power cord again. \ Moisture condensation caused by a sudden change of temperature or humidity. Turn off the power, then turn it on a few hours later. \ The disc does not allow the operation, or an unplayable disc is inserted. Check and replace the disc. Analog audio output is distorted. \ Set the [OUTPUT LEVEL] preference to [LOW]. MP3/JPEG No sound and/or no picture comes out. \ MP3/JPEG disc is recorded with the “packet writing (UDF file).” It cannot be played. Check the files you want to play back. [LOCK] is displayed on the display window and the disc tray does not open. Slide show playback of JPEG files Press 3(SELECT) while a JPEG file is selected on the Control display. • To select slide show effect Press and hold ANGLE-SLIDE EFFECT until [SLIDE EFFECT MODE:] and the current mode appears on the TV screen. By pressing and holding the button repeatedly, you can select the effect from 11 effects, random effect selection (RAND), and no effect (NONE). The effect is not applied to progressive JPEG files. File column DVD VIDEO disc playback sound level is lower than TV broadcast sound level. Operation is not possible. To select a JPEG file from the thumbnail list Program playback Audio Press 5/∞/2/3 to move the cursor bar to a desired file, then press 3(SELECT). • When you press ENTER, only the selected file is played back (except for MP3 files). \ When you press 0 while pressing down 7 on the player in standby mode, the tray lock function is activated. The disc tray cannot be opened or closed in this status. To release this status, press 0 while pressing down 7 on the player in standby mode. Files (tracks) are not played in the recorded order. \ This player plays the files in the alphabetic order. So, the playback order can vary. Picture Picture is noisy. \ The player is connected to a VCR directly and the copyguard function is activated. Connect the player so that the picture signal flows directly to the TV. With some discs, the picture may be blurred when [PICTURE SOURCE] is set to [FILM] or [AUTO]. Set [PICTURE SOURCE] to [VIDEO (NORMAL)] or [VIDEO (ACTIVE)]. \ The disc may be poorly recorded or scratched. Try to use the TRACK ADJUST function to play back with better quality. Picture is distorted when using component (Y, PB, PR) or S-VIDEO jack(s). \ Both the component connection and S-video connection are made. Disconnect the unused one. 9 10 Initial settings To dismiss a preference display Press SET UP. NOTES • Some items in the menus cannot be changed during playback. • During MP3 files playback, you cannot show the menus. • If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV. • For settings of the LANGUAGE menu, see also “Language codes” below. • Depending on the disc, the settings may not apply correctly. How to set the Initial settings Press SET UP. Press 2/3 to select the menu. Press 5/∞ to move to select the item. Press ENTER. Press 5/∞ to select the options, then press ENTER. LANGUAGE menu Item Contents MENU LANGUAGE You can select the default menu language of DVD VIDEO. AUDIO LANGUAGE You can select the default audio language of DVD VIDEO. SUBTITLE You can select the default subtitle language of DVD VIDEO. ON SCREEN LANGUAGE You can select “ENGLISH,” “FRENCH,” or “SPANISH” as the on-screen language. AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item correctly according to the logo on your receiver or decoder. [PCM ONLY]: Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital recorder. [DOLBY DIGITAL/PCM]: Receiver/decoder bearing Dolby Digital logo and no DTS. [STREAM/PCM]: Receiver/decoder bearing both Dolby Digital and DTS logos. ANALOG DOWNMIX Set this item properly according to your analog audio connection to play the sound of the surround multichannel audio on a DVD VIDEO. [DOLBY SURROUND]: Select this when connecting to a surround decoder. [STEREO]: Select this when connecting to a stereo amplifier or TV, or in case you want to record from a DVD VIDEO to a MiniDisc, cassette, etc. D.RANGE CONTROL Set this item to listen to DVD VIDEO recorded in Dolby Digital format at low or middle volume. [WIDE RANGE]: You can enjoy powerful playback sound. [NORMAL]: Normally, select this. [TV MODE]: Select this if the sound level of DVD VIDEO is lower than the one of TV program to make the sound at a lower volume clear. OUTPUT LEVEL Set this item to attenuate the level of the signal output from the analog AUDIO OUT terminals. If the sound from the speaker is distorted, select [LOW]. Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali,Bangla BO Tibetan BR Breton AA AB AF AM AR AS AY AZ BA BE BG BH BI BN CA CO CS CY DA DZ EL EO ET EU FA FI FJ FO FY GA GD Catalan Corsican Czech Welsh Danish Bhutani Greek Esperanto Estonian Basque Persian Finnish Fiji Faroese Frisian Irish Scots Gaelic GL GN GU HA HI HR HU HY IA IE IK IN IS IW JI JW KA Galician Guarani Gujarati Hausa Hindi Croatian Hungarian Armenian Interlingua Interlingue Inupiak Indonesian Icelandic Hebrew Yiddish Javanese Georgian Kazakh Greenlandic Cambodian Kannada Korean (KOR) Kashmiri Kurdish Kirghiz Latin Lingala Laothian Lithuanian Latvian, Lettish MG Malagasy MI Maori MK Macedonian KK KL KM KN KO KS KU KY LA LN LO LT LV ML MN MO MR MS MT MY NA NE NL NO OC OM OR PA PL PICTURE SOURCE SCREEN SAVER BACKGROUND Item Contents You can select the monitor type to match your TV when you play back DVD VIDEO discs recorded for wide-screen televisions. [16:9] (Wide television screen): For a wide-screen (16:9) TV. [4:3 LB] (Letter Box conversion): For a normal (4:3) TV. Displays a wide-screen picture to fit the width of the TV screen keeping the aspect ratio. [4:3 PS] (Pan Scan conversion): For a normal (4:3) TV. The picture is zoomed up to filling the screen vertically and the left and right sides of the picture are cut off. PS Pashto, Pushto PT Portuguese QU Quechua RM RhaetoRomance RN Kirundi RO Rumanian RU Russian RW Kinyarwanda SA Sanskrit SD Sindhi SG Sangho SH SerboCroatian SI Singhalese SK Slovak SL SM SN SO SQ SR SS ST SU SV SW TA TE TG TH TI TK Slovenian Samoan Shona Somali Albanian Serbian Siswati Sesotho Sundanese Swedish Swahili Tamil Telugu Tajik Thai Tigrinya Turkmen TL TN TO TR TS TT TW UK UR UZ VI VO WO XH YO ZU Tagalog Setswana Tongan Turkish Tsonga Tatar Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Wolof Xhosa Yoruba Zulu General • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. • “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. • This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Readable discs: DVD VIDEO, DVD-R/-RW (Video format), +R/+RW (Video format), SVCD, Video CD, Audio CD (CD-DA), CD-R/RW (CD-DA, SVCD, Video CD, MP3 format, JPEG) Video format: NTSC, 480i/480p selectable Other Power requirements: AC 120 V , 60 Hz Power consumption: 11.0 W (POWER ON), 1.0 W (STANDBY mode) Mass: 1.5 kg Dimensions (W x H x D): 435 mm x 44 mm x 201.5 mm Component (pin jacks) Y Output: 1.0 Vp-p (75 Ω) PB/PR Output: 0.7 Vp-p (75 Ω) VIDEO (pin jack): 1.0 Vp-p (75 Ω) S-VIDEO (S jack) Y Output: 1.0 Vp-p (75 Ω) C Output: 286 mVp-p (75 Ω) Horizontal resolution: 500 lines or more RESUME ON SCREEN GUIDE AUTO STANDBY Contents You can select the resume playback mode. [ON]: The player resumes playback from the position where playback has been stopped if the disc is still in the disc tray. [OFF]: This function is deactivated. [DISC RESUME]: The player resumes playback of the last 30 discs played. The player retains a memory of the stopped position of each disc even if the disc is removed from the disc tray. The TRACK ADJUST MODE selected for the disc will be resumed as well. Activate or deactivate the on-screen guide. Set the time until the player turns off (into standby) automatically if playback is stopped for more than 30 minutes or 60 minutes. ANALOG OUT (pin jack): 2.0 Vrms (10 kΩ) DIGITAL OUT (COAXIAL): 0.5 Vp-p (75 Ω termination) Audio characteristics Frequency response CD (sampling frequency 44.1 kHz): 2 Hz to 20 kHz DVD (sampling frequency 48 kHz): 2 Hz to 22 kHz(4 Hz to 20 kHz for DTS and Dolby Digital bitstream signals) DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz Wow and flutter: Unmeasurable (less than ± 0.002%) You can obtain optimal picture quality by selecting the source type of the disc contents. [AUTO]: Normally, select this option. The player recognizes the picture type (film or video source) of the current disc according to the disc information. [FILM]: For a film source disc. [VIDEO (NORMAL)]: For a video source disc with relatively a few movements. [VIDEO (ACTIVE)]: For a video source disc with relatively a lot of movements. You can set the screen saver function to ON or OFF. You can use your favorite image as the opening display. [STANDARD]: Display the JVC original image. [USER]: Display your favorite image as the opening display when a JPEG image is registered. [SAVE AS BACKGROUND]: To register a new image, select this while a JPEG image is displayed on the TV. 13 XV-330B/N332S[UC]EN1.indd 2 Malayalam Mongolian Moldavian Marathi Malay (MAY) Maltese Burmese Nauru Nepali Dutch Norwegian Occitan (Afan) Oromo Oriya Panjabi Polish Specifications and appearance are subject to change without prior notice. Audio outputs PICTURE menu 4:3 PS Specifications Video outputs OTHERS menu Item MONITOR TYPE 16:9 4:3 LB 12 Language codes list for the LANGUAGE menu You can change the settings of this player according to your preferences and playing environment. 1 2 3 4 5 11 14 15 16 2/14/06 9:46:44 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Create Date : 2006:02:14 09:57:45Z Modify Date : 2006:03:06 16:41:18+08:00 Subject : GNT0068-002B Page Count : 2 Page Mode : UseOutlines Page Layout : SinglePage Creation Date : 2006:02:14 09:57:45Z Producer : Acrobat Distiller 4.05 for Macintosh Mod Date : 2006:03:06 16:41:18+08:00 Author : ..JVC.. Metadata Date : 2006:03:06 16:41:18+08:00 Title : XV-N330B/XV-N332S Description : GNT0068-002B Creator : ..JVC..EXIF Metadata provided by EXIF.tools