Jabra Journey Owner S Manual
2014-07-06
: Jabra Jabra-Jabra-Journey-Owner-S-Manual jabra-jabra-journey-owner-s-manual jabra pdf
Open the PDF directly: View PDF 
.
Page Count: 18
jabra
JABRA® JOURNEY
USER MANUAL
1
english
JABRA JOURNEY
Contents
THANK YOU....................................................2
ABOUT YOUR JABRA JOURNEY.................................2
WHAT YOUR JABRA JOURNEY CAN DO .........................3
HOW TO PRESS THE BUTTONS .................................5
WHAT THE LIGHT MEANS ......................................5
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CHARGE YOUR JABRA JOURNEY................................6
TURNING YOUR JABRA JOURNEY ON AND OFF.................7
PAIRING YOUR JABRA JOURNEY WITH YOUR PHONE............7
CONNECTING WITH YOUR PHONE AUTOMATICALLY............8
PLACING JABRA JOURNEY IN YOUR VEHICLE ...................8
ADDITIONAL FEATURES........................................9
HOW TO HANDLE CALLS FROM A SINGLE PHONE .............10
HOW TO HANDLE CALLS FROM TWO MOBILE PHONES........12
TROUBLESHOOTING & FAQ ...................................12
NEED MORE HELP? ...........................................14
TAKING CARE OF YOUR JABRA JOURNEY ......................15
GLOSSARY ....................................................15
2
english
JABRA JOURNEY
tHAnK YoU
Thank you for purchasing the Jabra JOURNEY Bluetooth® in-car
speakerphone. We hope you enjoy it! This instruction manual will
help you to get you started and be ready to make the most of
your in-car speakerphone.
ABoUt YoUR JABRA JoURneY
A Volume down
Tap to adjust volume down
B Answer/end button
Tap to answer/end call
C Voice button
Tap to initiate voice command function
Tap to mute/un-mute your microphone during an active call
D Status light
Indicates pairing, connection, on/o and battery status
E Visor clip
Set your in-car speakerphone on your sun visor
F On/o switch
Slide to I position to turn the product on
G Volume up
Tap to adjust volume up
H Charging port
Charge with the Micro USB charger
I HD Voice Microphone
For clear voice and enhanced noise cancellation
3
english
JABRA JOURNEY
jabra
C
F
A
E
I
B
G
D
H
WHAt YoUR JABRA JoURneY CAn Do
Your Jabra JOURNEY lets you do all this:
- Answer/end calls
- Announce the name of the caller*
- Reject calls*
- Deliver great sound and noise cancellation with HD Voice Mic
- Voice dialing*
- “Answer/Ignore” command**
- Last number redial*
- Mute/un-mute with an active call with the voice button
- Third party calling*
- Transfer calls
- Adjust volume
- Auto pairing
- Auto On with the help of a motion sensor
- Auto O
* Phone dependent
** Available ONLY in English
4
english
JABRA JOURNEY
- Transmit mobile music, podcasts and directions from a GPS
application
- Advanced Multiuse™ – Stay connected to two active Bluetooth
devices at the same time
- Upgrade with the newest software
Specications
- Talk time up to 20 hours/Standby time up to 45 days
- Charging time approximately 2h. 30 min.
- HD Voice Mic. for enhanced noise cancellation
- Digital sound enhancement via DSP technology
- Noise cancellation through DSP
- Echo cancellation through DSP
- Voice Announcements**
- Voice Control through the voice button*
- “Answer/Ignore” command**
- Motion sensor for Auto On
- Auto Off
- A2DP (Advanced Audio Distribution Profile) for transmitting
music, podcasts and directions from a GPS app on your phone*
- Jabra Status Light (battery status, call status, pairing and
connection status)
- Size: H119 mm W59 mm D16 mm
- Weight 92 grams
- Operating range up to 10 meters (approximately 33 feet)
- Bluetooth specification version 3.0
- Supported Bluetooth profiles: HFP, HSP, A2DP, PBAP
- e-SCO for enhanced audio quality
- Rechargeable battery with charging option from car charger or
via USB cable
- Software upgradable
* Phone dependent
** Available ONLY in English
5
english
JABRA JOURNEY
HoW to PRess tHe BUttons
Instruction Duration of Press
Tap Press briey
Double tap 2 quickly repeated taps
Press Approx. 1-2 seconds
Press and hold Approx. 5 seconds
WHAt tHe LIGHt MeAns
Status Light In-car Speakerphone Status
The status light behind the
answer/end button ashes
rapidly blue
Pairing mode
The status light turns solid
blue and goes into standby
mode
Connected
The status light ashes blue
every 2nd second during one
minute and turns o
Standby/Sleeping mode
The status light ashes blue
every second
Incoming call
The status light turns solid
blue
Active call
The status light is ashing red There is less than 30 min. talk
time left
The status light turns red The unit is charging
The status light turns o The unit is fully charged
6
english
JABRA JOURNEY
GettInG stARteD
You should follow three steps before using your in-car
speakerphone:
1 Charge your Jabra JOURNEY
2 Turn your Jabra JOURNEY on
3 Pair your Jabra JOURNEY with your mobile phone
The rst time you turn your Jabra JOURNEY on you will hear Voice
Guidance telling you what to do.
NOTE: Voice Guidance and Voice commands are enabled as a
default setting when you turn on your Jabra JOURNEY the rst
time. You can at any time disable the functions by both pressing
the Voice button while you slide the power switch into the ON (I)
position. You will hear ”Voice o” and Jabra JOURNEY will no longer
talk to you or listen for commands. Repeat the process to enable
the voice features again.
CHARGe YoUR JABRA JoURneY
Make sure that your in-car speakerphone is fully charged before
you start using it.
Use the USB cable to connect Jabra JOURNEY to the car charger.
Plug the car charger into your car’s power outlet. The status light
will light up red while charging. When fully charged the status
light turns o. Jabra JOURNEY can be charged through your
computer by using the USB cable.
Please note: The lifetime of the battery will be signicantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least once
a month. Use only the charger provided in the box - do not use
chargers from any other devices as this may damage the in-car
speakerphone.
jabra
2.5 Hrs
7
english
JABRA JOURNEY
tURnInG YoUR JABRA JoURneY on AnD oFF
Slide the I/O switch to turn the in-car speakerphone on or o.
The rst time you turn your in-car speakerphone on, it
automatically enters pairing mode.
If the switch is left in the ON (I) position the Jabra JOURNEY will
turn o automatically after it has been disconnected with your
phone for 10 min.. The in-car speakerphone will also automatically
turn on and reconnect to your phone when you enter your car
(open the car door).
PAIRInG YoUR JABRA JoURneY WItH YoUR PHone
Jabra JOURNEY is connected to a mobile phone using a procedure
called ‘pairing’. By following a few simple steps and voice
guidance, a phone can be paired with the in-car speakerphone in
a matter of seconds.
1 Activate Bluetooth® on your mobile phone
Please check the manual for your mobile phone.
2 Put the in-car speakerphone in pairing mode
When you turn on your Jabra JOURNEY for the rst time, the in-car
speakerphone will automatically start up in pairing mode – i.e. it
can be detected by your phone. When the in-car speakerphone is
in pairing mode the status light will ash rapidly blue and a voice
will guide you through the pairing process.
3 Set your Bluetooth® phone to ‘search’ for the Jabra JOURNEY
Follow your phone’s instruction guide. Then set your phone to
search for devices. This usually involves going to a ‘setup,’ ‘connect’
or ‘Bluetooth®’ menu on your phone and selecting the option to
‘search’ or ‘add’ a Bluetooth® device.*
4 Your phone will nd the Jabra JOURNEY
Your phone will nd the in-car speakerphone under the name
“JABRA JOURNEY”. Your phone then asks if you want to pair
with the JABRA JOURNEY. Accept by pressing ‘Yes’ or ‘OK’ on the
phone and/or conrm with the passkey or PIN = 0000 (4 zeros).
Your phone will conrm with announcement “Connected” when
pairing is complete.
*Phone dependent
8
english
JABRA JOURNEY
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra JOURNEY
Jabra JOURNEY
OK
Passkey:
****
HANDSFREE
SELECT
Jabra JOURNEY
added.
The handsfree is
now ready for use
SELECT
Manual pairing mode
If you wish to use the in-car speakerphone with a dierent phone,
or if the pairing process was interrupted, you can manually set the
in-car speakerphone to pairing mode.
Turn the in-car speakerphone on. Press and hold the answer/end
button for approximately 5 seconds until the status light stars
blinking rapidly blue. Then repeat steps 2 and 3 in the above
pairing guide.
ConneCtInG WItH YoUR PHone AUtoMAtICALLY
Pairing is only needed the rst time an in-car speakerphone and
phone are used together. When the in-car speakerphone and
phone have been paired once they will automatically connect
when the in-car speakerphone is on and Bluetooth® is activated
on the phone. The in-car speakerphone can be used when it is
“connected” to the phone. If the device is paired, but does not
immediately connect, tap the answer/end button.
PLACInG JABRA JoURneY In YoUR VeHICLe
The Jabra JOURNEY sits discreetly and conveniently on the sun
visor using the integrated metal clip. The product can be easily
taken on and o the sun visor. For optimal sound quality place the
Jabra JOURNEY right in front of you and speak directly into the in-car
speakerphone.
9
english
JABRA JOURNEY
ADDItIonAL FeAtURes
Voice control button*
If you phone supports voice control, the voice control button on
Jabra JOURNEY allows you to control your phone with your voice.
The button can also be used to mute/un-mute your microphone
during an active call.
“Answer/Ignore” Voice Commands**
You can also take calls with your voice. Just say “Answer” or
“Ignore”.
Motion Sensor and Auto ON
Jabra JOURNEY has a built-in motion sensor that registers a
movement in a car and sends a signal to the device to power on.
Auto ON is possible if your unit has been turned o automatically
and the On/O slider is placed in the position “I”.
On/O
Sleep mode and Auto OFF
When not connected to a phone, the in-car speakerphone
turns o automatically after 10 minutes. The phone will turn on
automatically with help of a motion sensor. You can also turn it on
again by typing the answer/end button.
Caller ID and name announcement*
During an incoming call Jabra JOURNEY will access the
phonebook on your mobile phone and announce the name of
the caller. If the name is not stored in your phonebook and your
phone supports PBAP it will announce the number of the caller
instead.
* Phone dependent
** Available ONLY in English
10
english
JABRA JOURNEY
Play music and GPS directions*
Make sure that the in-car speakerphone and mobile phone
are connected. When you play music or GPS directions from
your mobile phone, it will automatically transfer them to your
in-car speakerphone. If your phone does not allow this feature,
press the answer/end button to transfer the music to the in-car
speakerphone. Music or GPS directions will automatically be
paused when you have an incoming call. When the call is ended it
will start playing again.
Advanced Multiuse™
Jabra JOURNEY can be connected to two mobile devices at the
same time. To learn more about Advanced Multiuse™ please go to
the HOW TO HANDLE CALLS FROM TWO MOBILE PHONES section.
HoW to HAnDLe CALLs FRoM A sInGLe PHone
Function How to perform
Single call
Answer or end a call Tap the answer/end button on
your in-car speakerphone to
answer or end a call. You can
also answer/end calls by using
your voice. Just say “Answer”
or “Ignore”
Make a call The call will automatically
transfer to your in-car
speakerphone*. If not tap the
answer/end button
Reject a call* Double tap the answer/end
button to reject the incoming
call
Redial last number* Double tap the answer/
end button when the in-car
speakerphone is on and not
in use
*Phone dependent
11
english
JABRA JOURNEY
Mute Tap the voice button to
mute an active call. A sound
will indicate that the in-car
speakerphone is on mute
every 10 seconds until the in-
car speakerphone is un-muted
Un-mute To un-mute an active call, tap
the voice button again
Adjust volume Tap volume + or volume- to
adjust the volume level. A
short sound will indicate
when the volume level is at its
highest or lowest limit
Hold active call Press the answer/end button
Transfer an active call from
your phone to the in-car
speakerphone
Tap the answer/end button or
press it for a long time
Three way call (Another incoming call)
Release active-accept
incoming call
Tap the answer/end button
Hold active/accept incoming Press the answer/end button.
Reject incoming call Double tap the answer/end
button
Three way call (The other call is on hold)
Release active/activate held Tap the answer/end button
Hold active and activate
held call
Press the answer/end button
Release held call Double tap the answer/end
button
12
english
JABRA JOURNEY
HoW to HAnDLe CALLs FRoM tWo MoBILe
PHones
Function How to perform
Calls on two phones (One active call – the other phone is
ringing)
Release active/accept
incoming call
Tap the answer/end button
Reject incoming call Double tap the answer/end
button
Hold active/accept incoming Press the answer/end button
Active calls on the two connected phones – other phone’s call
is on hold
Function How to perform
Release active/activate held Tap the answer/end button
Hold active and activate
held call
Press the answer/end button
Release held call Double tap the answer/end
button
tRoUBLesHootInG & FAQ
I press the voice button and nothing happens
Not all mobile phones support voice control function. Please,
verify if you mobile phone has a voice control mode by checking
its user manual.
I press the voice button and but cannot check battery status
of Jabra JOURNEY
Some in-car speakerphones have a voice control system driven
by the speakerphone itself. Each mobile phone has its own voice
control set up. If your phone supports the voice control function,
its user manual should list the words that you can use to control
13
english
JABRA JOURNEY
your mobile phone. Some phones when turned into the voice
control mode suggest what words you can use to control your
phone. The words are usually written on the mobile phone screen.
I hear crackling noises
Bluetooth is a radio technology, which means it is sensitive to
objects between the in-car speakerphone and the connected
device. It is designed for the in-car speakerphone and the
connected device to be used within 33 feet (10 meters) of each
other, with no major objects in the way (walls, etc.).
I cannot hear anything in my in-car speakerphone
- Increase the volume in the in-car speakerphone.
- Ensure that the in-car speakerphone is paired to a device that is
playing.
- Make sure your phone is connected to the in-car speakerphone
by tapping the answer/end button.
I am having pairing problems
You may have deleted the in-car speakerphone pairing
connection in your mobile phone. Follow the pairing instructions.
I want to reset the pairing list in my in-car speakerphone
The in-car speakerphone registers a list of up to 7 mobile phones.
To remove the list:
1) Put your Jabra JOURNEY in the pairing mode by long press on
the answer/end button;
2) The press Volume down button while holding your finger on
the answer/end button.
A beep and a purple ash of the status light indicate the list was
removed from the in-car speakerphone memory. The next time
you power on, the in-car speakerphone will go into pairing mode
as the rst time you powered your new Jabra JOURNEY on.
Will the Jabra JOURNEY work with other Bluetooth
equipment?
The Jabra JOURNEY is designed to work with Bluetooth mobile
phones. It can also work with other Bluetooth devices that are
compliant with Bluetooth version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution prole.
14
english
JABRA JOURNEY
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to
support a hands-free prole. Even if the hands free prole is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. Please consult
your device manual for details.
Please note that some features can only be operated from the
primary device e.g. voice dial using Jabra JOURNEY with 2 mobile
phones.
neeD MoRe HeLP?
1. Web: www.jabra.com
(for the latest support info and online User Manuals)
2. E-mail:
Deutsch support.de@jabra.com
English support.uk@jabra.com
Español support.es@jabra.com
Français support.fr@jabra.com
Italiano support.it@jabra.com
Nederlands support.nl@jabra.com
Polska support.pl@jabra.com
Scandinavian support.no@jabra.com
support.ru@jabra.com
Information: info@jabra.com
3. Phone:
Belgique/Belgie 00800 722 52272
Danmark 70 25 22 72
Deutschland 0800 1826756
Die Schweiz 00800 722 52272
España 900 984572
France 0800 900325
Italia 800 786532
Luxembourg 00800 722 52272
Nederland 0800 0223039
15
english
JABRA JOURNEY
Norge 800 61272
Österreich 00800 722 52272
Polska 0801 800 550
Portugal 00800 722 52272
Suomi 00800 722 52272
Sverige 020792522
United Kingdom 0800 0327026
+7 916 246 69 00
International 00800 722 52272
tAKInG CARe oF YoUR JABRA JoURneY
- Always store the Jabra JOURNEY with the power off and safely
protected.
- Avoid storage at extreme temperatures (above 45°C/113°F
– including direct sunlight – or below -10°C/14°F). This
can shorten battery life and may affect operation. High
temperatures may also degrade performance.
- Do not expose the Jabra JOURNEY to rain or other liquids.
GLossARY
1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords
over a short distance approx. 33 feet (10 meters). Get more
information at www.bluetooth.com.
2. Bluetooth profiles are the different ways that Bluetooth
devices communicate with other devices. Bluetooth phones
support the headset profile, the hands-free profile or both. In
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software.
3. Pairing creates a unique and encrypted link between two
Bluetooth devices and lets them communicate with each other.
Bluetooth devices will not work if the devices have not been
paired.
16
english
JABRA JOURNEY
4. Passkey or PIN is a code that you enter on your mobile phone
to pair it with your Jabra JOURNEY. This makes your phone and
the Jabra JOURNEY recognize each other and automatically
work together. The passkey for all Jabra products is 0000.
5. Standby mode is when the Jabra JOURNEY is passively waiting
for a call. When you ‘end’ a call on your mobile phone, the in-car
speakerphone goes into standby mode.
Dispose of the product according to local
standards and regulations.
www.jabra.com/weee
REV A
MADE IN CHINA
TYPE: HFS003
www.jabra.com
© 2011 GN Netcom A/S. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
© 2011 GN Netcom US, Inc. All rights reserved. Jabra® is a registered
trademark of GN Netcom A/S. All other trademarks included herein
are the property of their respective owners. The Bluetooth® word
mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by GN Netcom A/S is under license. (Design and
specifications subject to change without notice).
