Jack Lalannes Power Juicer Deluxe Owners Manual PJ Instr. (PS)
Tristar-Deluxe-Ssmt1000-Users-Manual-460358 tristar-deluxe-ssmt1000-users-manual-460358
SSMT1000 to the manual 7dc563b2-67f1-4e60-a0a7-0f087e5be481
2015-05-12
: Jack-Lalannes-Power-Juicer Jack-Lalannes-Power-Juicer-Power-Juicer-Deluxe-Owners-Manual-715990 jack-lalannes-power-juicer-power-juicer-deluxe-owners-manual-715990 jack-lalannes-power-juicer pdf
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
DELUXE Model # SSMT1000 Item # 108709 © 2008 Tristar Products, Inc. All rights reserved. Distributed by: Tristar Products, Inc. Wallingford, CT 06494 PJ Deluxe V2 0508 OPERATING MANUAL TABLE OF CONTENTS 3 4 5 6 8 9 10 2 Important Safety Information DELUXE Accessory Kit & Cookbook • "Recipes for Healthy Living" Cookbook • Power Juicer Platform • Filter Brush • Overflow Platform • Measuring Cup Helpful Hints Replacement Parts Kit #1 Replacement Parts Kit #2 Pulp Collector Filter Parts List Blade Lid with Pulp Guard Crescent Tool Assembly Pusher To order or for more information on juicing visit: www.powerjuicer.com Disassembly or call 1-800-526-2518 — 8:00am–9:00pm EST Monday–Friday 9:00am–5:00pm EST Saturday & Sunday Please allow 4-6 weeks for shipping. YES! Please Send Me the following Items: Cleaning Your Power Juicer Troubleshooting Print Name ________________________________________________ n One Accessory Kit & Cookbook for only $19.99 plus $6.99 s&h. Total $26.98. Address____________________________________________________ n “Recipes for Healthy Living” Cookbook - FREE plus $7.99 s&h. Total $7.99. ______________________________________________Apt._________ n Replacement Parts Kit #1 for only $29.99 plus FREE s&h. Total $29.99. City______________________________________________________ n Replacement Parts Kit #2 for only $34.99 plus FREE s&h. Total $34.99. State___________________ Zip_______________________________ n VISA n MasterCard n Discover Exp. Date____ Credit Card #______________________________________ Phone# (____________) _____________________________________ n Check n Money Order (NJ residents add 7% sales tax. PA & CT residents add 6% sales tax. NY & NV add applicable sales tax.) E-mail ____________________________________________________ U.S. CURRENCY ONLY PRICES SUBJECT TO CHANGE Please make checks payable to: POWER JUICER Mail Payment Today To: POWER JUICER 26 Barnes Industrial Rd. North, P.O. Box 3125, Dept. PJSS999, Wallingford, CT 06494 11 TROUBLESHOOTING Problem The motor does not run after being switched on. Possible Reasons and Solution • Check to see if unit is plugged in. • Locking bar is not locked in place properly. • Check if all parts are assembled properly. The motor is running with loud noise and shaking. IMPORTANT SAFEGUARDS READ THESE SAFEGUARDS CAREFULLY BEFORE USING THIS PRODUCT! • NOT FOR USE BY CHILDREN! Keep out of the reach of children to avoid injury. This appliance is not a toy. • Make sure the lid is attached properly and securely locked before operating the Power Juicer. • Do not unfasten the locking bar during operation. • Check if there is any residue left between blade and receptacle. • To avoid risk of injury keep hands and utensils out of the juicer and away from its sharp blade during operation. • Check to see if food is stuck to the bottom of the pusher. • Use the pusher, not fingers or utensils, to propel the food into the juicer. • Check that all parts are assembled properly and in the correct position. • Should food become lodged in the opening use pusher to push it down. If food remains stuck, turn the power off, wait until motor stops, unit shuts down completely, and is unplugged before disassembling the juicer and removing the blocked food. • Juicing overripe fruit may result in too much pulp and will clog the filter. Turn machine off and clean the filter. • Make sure the motor stops completely and the unit is unplugged from the electrical outlet before cleaning, putting on or removing parts. The motor is running. The spout is in the downward position, but no juice is coming out. • Turn the power off and unplug the machine. Wait for blade to stop spinning. Use a toothpick to loosen any obstruction in the non-drip spout. • If juicer stops due to improper operation or if there is excessive noise, turn power off, wait for blade to stop spinning, unplug from electrical outlet, disassemble and clean all components then reassemble machine. The motor overheats causing the power to automatically shut off. • The motor needs to warm up for 10 seconds before use. • The fruits and vegetables may be soft or overripe. • There may be too much pulp in the filter. Turn machine off and clean the filter. • Motor stops running due to the built-in feature, the overheat safety control. Juice splashes from the rim of the receptacle. • This is normal. • To protect against risk of electrical shock or injury, never immerse power cord, plug, or main unit in water, or other liquids. • Do not operate this or any appliance with a damaged cord or plug. • Do not operate if appliance malfunctions, is dropped or damaged in any manner. Let a qualified appliance repair person examine and or repair appliance before using. • To avoid electric shock or serious injury do not use any attachments that were not recommended or sold by the manufacturer. • Do not let power cord hang over the edge of table, counter, or let cord touch hot surfaces such as stoves. • To reduce the risk of injury, never place blade on base without properly assembling the unit. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify or force the plug in any way. • The motor will not run if unit is not properly assembled. The motor has a built-in safety feature that will not let the power turn on unless the locking bar is locked in place. 10 3 ADDITIONAL SAFEGUARDS The Power Juicer has a thermal cut-off safety feature. If the unit accidentally overheats, it will stop working temporarily until the Power Juicer cools down. Afterwards, the unit will continue to work again normally. In the event the Power Juicer is jammed the motor may shut down. If this occurs the juicer should be shut off and unplugged. The unit should be thoroughly cleaned to remove the obstruction. The thermal cut-off safety feature is designed to shut off the motor when it over heats. Please use extreme caution when handling the Power Juicer blade as the blades are very sharp. CLEANING YOUR JUICER • • • • • Always turn power off to the Power Juicer immediately and remove power cord from electrical outlet before disassembling to clean due to any food obstruction. CAUTION Use caution when handling blade as blades are very sharp. If juicer jams turn power off immediately and remove power cord from electrical outlet before disassembling to clean. The Power Juicer has a thermal cut-off safety feature. If the unit accidentally overheats, it will stop working temporarily until the Power Juicer cools down. Clear any obstruction. Afterwards, the unit will continue to work again normally. HELPFUL HINTS Obtain the best results from your Jack LaLanne Power Juicer by following these helpful hints. • Do not put any fruit or vegetables in your machine until power is turned on. • Allow unit to run for at least 10 seconds before juicing. • Do not force food into the juicer. Allow food to pass through slowly and steadily using the pusher. You do not need to apply pressure unless the juicer starts to vibrate. Then only a slightly harder push should bring it back to balance. • Any fruit or vegetable that will fit the chute can be put through whole. The only time it is necessary to cut is when something is too large. Then it should be cut into large enough pieces to fit in the chute. Do not cut pieces too small. • Remove large pits such as peach, mango, etc. as they will damage the blade and possibly the unit. Before juicing cherries we recommend you remove the pits using a cherry pitter. • Cleaning can be made easy by placing a plastic bag inside the pulp collector container. When you are done juicing, the bag can be lifted out and disposed of easily leaving the pulp collector easier to clean. • Let the Power Juicer run for a few minutes before turning off to allow any excess juice to be extracted from the pulp. Once turned off it is quite normal for the juicer to spin for a minute or so due to the very fine precision balancing of this appliance. Wait until it is done spinning before disassembling. • Do not use bananas or avocados as they do not contain juice and will clog machine. Add them separately in a blender. • We do not recommend using overripe fruit as it will leave too much pulp in the filter and clog the machine. • Do not pour liquids into the machine at any time. SAVE THESE INSTRUCTIONS 4 • • • • Turn off the power switch and wait until the motor completely stops. With dry hands, unplug the power cord from electrical outlet. Disassemble the machine. (See disassembly instructions.) Wipe base with a soft damp cloth or sponge. Do not submerge base in water. Do not spray with water or any other liquid. Base is not dishwasher safe. We recommend washing the pusher by hand in warm soapy water. Due to temperature differences in dishwashers if you choose to wash the pusher in the dishwasher, place it on top rack only. Clean all other parts in warm, soapy water. A mild detergent is recommended. Rinse well and dry thoroughly. All components are dishwasher safe with the exception of the base. Do not use in European Import or a commercial dishwasher. To clean the filter and blade, hold them under warm running water. Use a softbristled dish washing brush gently to completely clean pulp from filter. Rinse the filter from the outside under running water. Dry components thoroughly then assemble the machine and turn the power on to spin out any excess water. Make sure unit and parts are completely dry then store in a cool, dry place. TO CLEAN THE JUICE SPOUT 1 Locking Mechanism STEP 1: Locate removable juice spout locking mechanism on the bottom side of the receptacle. Note: Juice spout will be in the locked position. LOCKED POSITION 2 Hinge Pivot Arm UNLOCKED POSITION 3 Juice Spout STEP 2: To unlock, turn locking mechanism counter-clockwise, lining up notch with juicer spout hinge pivot arm. STEP 3: Lift up juice spout carefully from receptacle and remove to clean. TO REATTACH: Insert juice spout back into original position and turn the locking mechanism clockwise to lock into place. IMPORTANT: When reattaching juice spout back into original position make sure juice spout is in the locked position and tightly secured before use. 9 DISASSEMBLY 1 Pusher IMPORTANT: Before disassembling the unit make sure you turn the power OFF and unplug the machine from the electrical outlet. PARTS LIST 2 MAIN UNIT (Fully Assembled) Locking Bar Pusher Pulp Guard Pulp Collector STEP 1: Remove pusher from the chute. 3 STEP 2: Lower the locking bar (silver) into position as shown. Lid with Pulp Guard 4 Chute Blade Filter Crescent Tool Pulp Collector STEP 3: Remove lid with pulp guard, and pulp collector. 5 Filter Pulp Guard STEP 4: Use the crescent tool (orange) to remove the blade. Place the two pegs at either end of the crescent tool into the two holes on the blade, press down and turn counter-clockwise to unlock the blade. Remove blade carefully. 6 Receptacle Lid with Pulp Guard Crescent Tool (Crescent tool pegs fit here to tighten. WARNING: DO NOT OVER TIGHTEN) (for tightening and removing blade) Blade Screw Peg (Pegs fit into blade.) Locking Bar Base Removable Non-Drip Spout STEP 5: Remove filter. 8 STEP 6: Make sure spout is in the upright position to avoid leakage. Remove receptacle from base. Lip Base Receptacle 5 ASSEMBLY 1 ASSEMBLY (CONT.) Assemble as shown STEP 5: 2 Base Locking Bar Lip Juice Spout Receptacle Base Front of Machine Place lid with pulp guard attached on top of receptacle, making certain it is snugly aligned with the pulp guard facing in the opposite direction of the juice spout. Lock lid into place by lifting locking bar up until it clicks into grooves located on both sides of the lid. Make sure locking bar is in the full upright, locked position. IMPORTANT: The unit will not start until this bar is properly locked in place. 5 Receptacle Lid with Pulp Guard Pulp Collector (Spout side) STEP 1: STEP 2: Place base on a dry flat surface with locking bar in down position as shown. In front of the machine (spout side). Place receptacle on the base, with juicer spout facing direction of locking bar. Settle receptacle into alignment. 3 4 STEP 6: Insert pusher into chute. Always use pusher to feed fruits and vegetables into unit. Push gently, never force. The blade will do the work. 6 Pusher Chute Lid with Pulp Guard Blade Filter Filter Receptacle Crescent Tool Blade Holes STEP 7: STEP 3: STEP 4: Place filter inside receptacle, matching the opening on its bottom to the screw peg connected to the base. Place blade inside filter, centered over screw peg. Using orange crescent tool, place its pegs into the holes in the blade and turn clockwise until tightened. IMPORTANT: Do not over tighten as the screw peg will break. Remove crescent tool and set aside. 6 CAUTION: Do not leave tool inside juicer. Make sure juice spout is in the downward position. If the juice spout is left in the upright position the juice will not flow. It will stay in the receptacle and may overflow from the sides. 7 UPRIGHT POSITION DOWNWARD POSITION 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:08:23 Create Date : 2008:06:04 16:47:50Z Creator Tool : QuarkXPress(tm) 6.5 Modify Date : 2008:06:05 14:47:01-04:00 Metadata Date : 2008:06:05 14:47:01-04:00 Producer : QuarkXPress(tm) 6.5 X Press Private : %%DocumentProcessColors: Black.%%EndComments Format : application/pdf Title : PJ Final Instr. (PS) Document ID : uuid:a56a0f8e-b400-4acd-9f1b-e7f85893cb84 Instance ID : uuid:6711c951-564a-42cd-90a0-a38d93da031d Page Count : 6 Creator : QuarkXPress(tm) 6.5EXIF Metadata provided by EXIF.tools