Jakks Pacific 44231TX 2.4GHz FHSS and WiFi Video Baby Monitor - Baby Unit User Manual 44231 IS label

Jakks Pacific (HK) Ltd. 2.4GHz FHSS and WiFi Video Baby Monitor - Baby Unit 44231 IS label

UserManual.wiki >

Jakks Pacific >

44231TX User Manual >

Contents

1. Manual
2. User manual

User manual

BABYWATCH 2.0 CAMERAVIEWERMOUNTINGHARDWAREUSB CABLE USB ADAPTORELECTRICALCORD HOLDERS 6XAC/DC ADAPTORVIEWERFRAME STAND& BELT CLIPCLASPSWRISTWATCH BAND SNAPWRIST BANDVIEWERCLIPVIEWER NECKLACENECKLACE CLIPVIEWER STANDSMART DEVICESTANDTM & © 2013 MANUFACTURED BY JAKKS PACIFIC, INC., 22619 PCH, MALIBU,CA 90265 U.S.A.MADE IN CHINA.Contents may vary in style, color, shape and decoration from images shown on packageor in advertising. Questions or comments? www.jakks.com, consumers@jakks.com,1-877-875-2557 in North America.INSTRUCTION GUIDECONTENTS162X2XChildren have STRANGLED in cords. Keep this cord out of reachof children (more than 3 ft (0.9m) away). Do not remove this tag.WARNING:STRANGULATION HAZARD

PAIRINGSET UPSelect a method to hold the ViewerVIEWER STAND- Insert the VIEWER into the VIEWER STAND. Viewing angle is adjustable.SNAP WRIST BAND- Slap the SNAP WRIST BAND onto your wrist. Insert the VIEWER into the VIEWER CLIP.WRIST WATCH BAND- Insert the VIEWER into the VIEWER CLIP.NECKLACE- Insert the VIEWER into the NECK LACE CLIP.- Open the CLASPS, place around your neck and close the CLASPS.FRAMESTAND / BELT CLIP- Insert the VIEWER into the FRAME/BELT CLIP.- FRAME Open the FRAME STAND and set unit on flat surface. - BELT Open the BELT CLIP and attach unit to BELT.AC/DC ADAPTOR- Secure the cord to the wall using the 6 ELECTRICAL CORD HOLDER included to keep cord away from the baby’s reach.- Plug the AC/DC ADAPTOR into the back of the BABYWATCH CAMERA as shown.- Plug the other end into a 110V AC outlet.VIEWER STAND REAR VIEW OF CAMERAWRIST WATCH BAND NECKLACETILT DOWN OR UP ROTATE LEFT OR RIGHTFRAME STAND BELT CLIPAC/DC ADAPTOR 110 V AC OUTLETSNAP WRIST BAND WI-FI AND WEBSITE SET UP- Move the ON/OFF Switch on Babywatch camera to ON position.- Plug the USB CABLE into the USB PORT on the back of the CAMERA.- Plug the other end into your computer. Click on the FLASH DRIVE ICON.- For Macintosh, Open the SET UP ICON in the MacOSX directory and follow the directions.- For Windows, Open the SET UP ICON in the MS Windows directory and follow the directions.- For more detail, please go to the website “www.babywatchmonitor.com”.(Unplug the USB cable after set up is completed.)- Set the Babywatch 2.0 Camera on a flat surface with an unobstructed view of your child.- Once the camera is connected with either your computer or the VIEWER, you can TILT or ROTATE camera through camera controls on the Viewer or website to get the best view. You may also use your compatible iDevice, Smart Phone or Smart Tablet but requires download of the BABYWATCH APP.- For the best performance, do not place the Viewer within 18 inch of the Babywatch Camera.SET UPSet up the Babywatch 2.0 CameraFlat Surface MountingCLASPS USB CABLEVIEWER2 3WARNING Never place camera or cords within 3 feet of the crib.

PAIRINGAM00:0001.01.2012- Plug the USB CORD into the side of the CAMERA VIEWER as shown.- Plug the other end into your computer or a USB adaptor. - BATTERY ICON in VIEWER SCREEN will show when fully charged.- Remove USB CORD. Battery charge will last approximately 12 hours. (Sleep mode)*USB port on viewer is used for charging purpose only.VIEWER CHARGINGSTEP 5 STEP 6STEP 2STEP 1STEP 4STEP 3Wall Mounting1/4” HOLEBATTERY ICONSLOWFULL- STEP DRILL a 1/4” HOLE in the wall. Insert wall anchor into the hole. Insert screw into the wall anchor.- STEP Place the BABYWATCH CAMERA on the SCREW and LOWER slightly to secure.- STEP Plug the AC/DC ADAPTOR into the back of the BABYWATCH CAMERA as shown.- STEP Plug the other end into a 110V AC outlet.- STEP Remove the BACKING from the ELECTRICAL CORD HOLDER.- STEP Use the ELECTRICAL CORD HOLDERS to attach the AC/DC ADAPTOR CORD to the wall.The Babywatch 2.0 Camera can be mounted on a wall overlooking your baby. Once the camera is connected with your WI-FI system, you can TILT or ROTATE camera through camera controls on the Viewer, iDevice, Smart phone or Website to get the best view.SET UPSet up the Babywatch 2.0 CameraCharge the Babywatch 2.0 Camera ViewerBabywatch 2.0 CameraCONTROLSLIGHT SENSORPOWER ON LIGHTCAMERA LENSMICROPHONEWI-FI INDICATORUSB PORTPAIRING BUTTONON/OFF SWITCHAD/DC ADAPTOR PLUGSPEAKERCamera ViewerUSB PORTVIEWING SCREENMENU / BACKMICROPHONERESET BUTTONSPEAKER2.4GHZ SIGNAL STRENGTHTIMEDATECAMERA NUMBERBATTERY LEVEL13425 6 7 8 9104 51 27893 4 5 61011ADULT ASSEMBLY ONLYAlways keep unattached screws awayfrom young children to avoid risk ofsmall component and sharp end.112345612345678910789101123456

PAIRINGSTEP 1 STEP 2STEP 3 STEP 4Apple:Go to the Appstore on your deviceSearch for BABYWATCHPress the FREE button to the left of the app icon to begin download.ANDROID:Go to the Google Play market on your deviceSearch for BABYWATCHPress the INSTALL button to the right of the app icon to begin download.DOWNLOADING APPSTEP 1 STEP 2Download the BABYWATCH APP from the iTunes App Store or Google Play market. Use the SMART DEVICE STAND to hold your SMART DEVICE. STEPBe sure Babywatch 2.0 Camera is plugged into AC adaptor and powered. Insert the CHARGING CORD through the bottom of the SMART DEVICE STAND. (CHARGING CORD is not included)STEPPlug the CHARGING CORD into your SMART DEVICE and insert the DEVICE into the STAND. Wind the cable under the stand. Plug the other end of the CHARGING CORD into a 110V AC OUTLET. Wind the cable under the base.SMART DEVICESMonitor your Baby with a Smart DeviceOUT OF THE BOX:Both units are factory PAIRED, but if you have pressed the RESET BUTTON on the VIEWER, or if they are not paired:STEPMove the ON/OFF Switch on the Babywatch Camera to the ON position. Press and hold in the POWER BUTTON on the VIEWER for 3 seconds. STEPPress menu button, then access the VIEWER MENU (Touch Quadrant 3). STEPSelect ADD CAMERA (Touch Quadrant 2). The VIEWER will display “SCANNING”.STEPPress the PAIRING BUTTON on the back of the Babywatch Camera for 3 seconds. The VIEWER will display “Added”, if pairing is successful.PAIRINGConnect the Babywatch between Camera 2.0 and the Camera Viewer6 7ANDROID APP ONAn additional cost may be incurred by download / going online check your data charges with your network provider.121234

TimeEnterDate12h MM/DD01.01.2000AM08:00TimeEnterDate12h MM/DDTimeEnterDate12h MM/DDEnterTimeEnterDate12h MM/DD01.05.2000AM08:02Enter01.05.2000AM08:02Enter01.05.2000AM08:02Enter01.05.2000AM08:02Enter08.05.2012AM08:12STEP 1SCREEN QUADRANTSCLOCK MODE SCREENACCESS MAIN MENU SELECT SETTINGSLIVE VIEW SCREENSETTING OPTIONS ADJUST BRIGHTNESSCLOCK SET THE HOURSET THE MONTHSET THE DAYSAVE SETTINGSSET THE YEARBRIGHTNESSTouch quadrant 1 to access the BRIGHTNESS SETTINGS. The VIEWER will go into LIVE MODE with 2 BRIGHTNESS ICONS overlaid. Touch quadrant 2 to INCREASE brightness or quadrant 4 to DECREASE brightness.(Press Button back to the Previous Menu.)DATE / TIME FORMATTouch quadrant 3 to select the DATE/TIME FORMAT MENU. The DATE settings can be displayed in MONTH/DAY or DAY/MONTH digits. The TIME can be displayed in 12 or 24 HOUR digits. TIME Touch quadrant 2 or 4 to toggle between 12 or 24 HOUR digits.LIVE VIEW MODE- Move the ON/OFF Switch on the Babywatch Camera to the ON position.- Press the POWER BUTTON on the VIEWER, the VIEWER will display in CLOCK mode.- Press BUTTON again, VIEWER will enter LIVE VIEW, which displays what the BABYWATCH CAMERA 2.0 is seeing.(Press BUTTON can switch between LIVE VIEW screen & CLOCK mode.)OPERATIONLive View, Main Menu, Settings, Brightness and Date/Time FormatDATE / TIME SELECT TIME FORMATDATE FORMATSAVE SETTINGSSELECT DATE FORMATDATE / TIME FORMAT (continued)DATE Touch quadrant 3 to access the MONTH/DAY settings. Touch quadrant 2 or 4 to toggle between MM/DD or DD/MM. Touch quadrant 3 to SAVE settings.OPERATIONDate/Time Format and Clock SettingsCLOCK Touch quadrant 2 to set the current DATE and TIME.- HOUR The HOUR digits will start blinking. Touch quadrant 2 to add an hour, or 4 to subract an hour. Touch quadrant 3 to SAVE.- MINUTES The MINUTES digits will start blinking. Touch quadrant 2 to add a minute, or 4 to subract a minute. Touch quadrant 3 to SAVE.- AM/PM The AM or PM will start blinking, Touch quadrant 2 or 4 to toggle. Touch quadrant 3 to SAVE.- DAY The DAY digits will start blinking. Touch quadrant 2 to add a day, or 4 to subract a day. Touch quadrant 3 to SAVE.- MONTH The MONTH digits will start blinking. Touch quadrant 2 to add an month, or 4 to subract an month. Touch Quadrant 3 to SAVE.- YEAR The YEAR digits will start blinking. Touch quadrant 2 to add a year, or 4 to subract a year. Touch quadrant 3 to SAVE.SET CLOCK:8 921 3 4REFERENCEAreas of the VIEWER SCREEN will be referenced as QUADRANTS: QUADRANT 1 QUADRANT 2 QUADRANT 3 QUADRANT 4MAIN MENUIn LIVE MODE, Touch quadrant 3 to access the MAIN MENU.1234SETTINGSTouch quadrant 3 again to access the SETTINGS MENU. QUADRANT 1: BRIGHTNESS QUADRANT 2: CLOCK QUADRANT 3: DATE/TIME QUADRANT 4: TIMER1234

Ye s NoCAMERA OFFScanning25sAdded08.05.2012AM08:1208.05.2012AM08:12MENU OFF BUTTONCAMERA OFF- PRESS & HOLD the MENU/BACK button for 3 seconds. The camera off screen will display.- Touch quadrant 3 to camera off. ACCESS MAIN MENU SELECT ADD CAMERA MODESCANNING A NEW CAMERA CAMERA ADDEDACCESS MAIN MENUCAMERA LISTSELECT CAMERA SELECTION MODEADD A NEW CAMERA - In LIVE VIEW MODE, touch quadrant 3 to access the main menu.- Touch quadrant 2 to access the ADD NEW CAMERA MODE. The viewer will scan the new camera. - Press the Pairing Buttom on the back of Babywatch Camera for 3 seconds. The Viewer will display “ADDED” if pairing is successful.The maximum add 4 Cameras for 1 VIEWER.(Additional Camera Need to Buy Separately.)SELECT A CAMERA- In LIVE VIEW mode, touch quadrant 3 to access the Main Menu.- Touch quadrant 1 to access the camera selection mode.- Touch quadrant 1-4 to select different camera to view.OPERATIONCamera SelectionCAMERA OFF MODEBATTERY LEVELThe Battery Level display at the top right side. When Battery Low, the Low Battery icon will display with BEEP sound alarm.BATTERY LEVEL BATTERY LOWSIGNAL LEVELThe Signal Level display at the top left side.When signal is lost, the Lost Signal icon will display with Beep sound alarm.SIGNAL LEVEL LOST SIGNALCAMERA OFF MODE SETTINGOPERATION12 13

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This Class B digital apparatus complies with Canadian ICES-003.Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.If the BABYWATCH 2.0 CAMERA or VIEWER begin to function erratically, press the RESET BUTTON on the back of the VIEWER.Once the RESET BUTTON has been activated, the units will no longer be paired. For instructions on how to establish PAIRING, go to page 7. TROUBLESHOOTINGReset Button14 15WARRANTYJAKKS Pacific® Battery or Electrically-Operated Toy 90 DAY LIMITED WARRANTY Thanks for purchasing a great JAKKS Pacific® product!Please immediately register your product online at www.jakks.com/warranty.Registration is not required for the effectiveness of this limited warranty.IMPORTANT NOTICE TO CONSUMER:This 90 DAY LIMITED WARRANTY applies to the original product purchaser, provided the product: 1) was purchased from an authorized JAKKS™ distributor/dealer/retailer, and 2) is returned at your expense, postage pre-paid and insured, along with the original dated sales receipt to the address noted below. Please save a copy of your original sales receipt, as the original receipt will not be returned to you. If you return the product to us without the original dated sales receipt, this warranty coverage will not apply. If the product is determined by JAKKS to be defective and returned to JAKKS within the 90 day warranty period, we will (at our option) repair or replace it. Return shipment to you may take up to 6 weeks, depending upon your location. If your product is repaired or replaced, it will be warranted for the longer of the original warranty or for 30 days after warranty service.SCOPE OF LIMITED WARRANTY: The product is warranted to be: a) tested and inspected before shipment, and b) free of defects in material and workmanship for 90 days from date of purchase. If a covered defect occurs within the warranty period, then at our sole option, we will repair or replace the product or provide you with another product of equal value.WHAT IS NOT COVERED BY LIMITED WARRANTY: THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN MODIFIED OR REPAIRED BY USER OR OTHERS OR IF IT HAS BEEN DAMAGED AS A RESULT OF ACCIDENT, IMMERSION IN WATER, NEGLECT, ABUSE, MISUSE, BATTERY LEAKAGE, IMPROPER BATTERY INSTALLATION, UNAUTHORIZED SERVICE, LOSS OF PARTS, WEATHER, ACTS OF GOD, ANY ACTION OR OMISSION WHICH CONSTITUTES A DEVIATION FROM THE OPERATING INSTRUCTIONS, OR ANY OTHER CAUSES NOT ARISING OUT OF DEFECTS IN WORKMANSHIP OR MATERIALS. EXCLUSIONS FROM LIMITED WARRANTY: THIS WARRANTY IS EXCLUSIVE OF AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES RELATED TO THIS PRODUCT, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SPECIAL, INCIDENTAL AND CONSEQUENTIAL DAMAGES ARISNG FROM POSSESSION, USE, OR MALFUNCTION OF THIS PRODUCT ARE EXCLUDED BOTH FOR PROPERTY DAMAGE AND PERSONAL INJURY TO THE EXTENT LEGALLY PERMITTED.ADDITIONAL LEGAL RIGHTS: This warranty provides specific legal rights. You may have other or different rights in your state or country.QUESTIONS OR COMMENTS: If you experience product difficulties or have questions or comments, you may contact our Consumer Relations department as follows:Phone: 877-875-2557 (toll-free, North America only) or 909-594-7771 x560 (Monday- Friday, 7:30AM-4:30PM Pacific/GMT -8).Mail: JAKKS Consumer Relations, 21749 Baker Parkway, Walnut, California USA 91789. Email: consumers@jakks.comWHEN WRITING TO US: Please include: 1) product name; 2) item number; 3) purchase date; 4) description of the problem being experienced; and 5) your name, address and phone number. Additionally, if eligible under the warranty and so advised by JAKKS Consumer Relations, also include the defective product and the ORIGINAL dated sales receipt evidencing product purchase. Please retain a copy of your receipt.Supplied USB cables with ferrite and adaptor with ferrite must be used with this device to ensure compli-ance with the Class B FCC limits.To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The baby unit shall be installed and used such that parts of the user’s body are maintained at a distance of approximately 20 cm (8 inches) or more.ADDITIONAL STATEMENT

Navigation menu